Vibrational Spectroscopy of Cyanide-Bridged, Iron(II) Spin-Crossover

Gloria Agustí, Ana Belén Gaspar, M. Carmen Muñoz, and José Antonio Real ... Takeshi Tayagaki, Ana Galet, Gábor Molnár, M. Carmen Muñoz, Antoine Zwick,...
0 downloads 0 Views 166KB Size
© Copyright 2002 by the American Chemical Society

VOLUME 106, NUMBER 38, SEPTEMBER 26, 2002

ARTICLES Vibrational Spectroscopy of Cyanide-Bridged, Iron(II) Spin-Crossover Coordination Polymers: Estimation of Vibrational Contributions to the Entropy Change Associated with the Spin Transition† Ga´ bor Molna´ r,‡,§ Virginie Niel,| Ana B. Gaspar,| Jose´ -A. Real,| Antoine Zwick,⊥ Azzedine Bousseksou,*,§ and John J. McGarvey*,‡ School of Chemistry, The Queen’s UniVersity of Belfast, Belfast BT9 5AG, Northern Ireland, U.K., Laboratoire de Chimie de Coordination, CNRS UPR-8241, 205 route de Narbonne, F-31077 Toulouse, France, Departamento de Quimica Inorganica, UniVersidad de Valencia, AVenida Dr. Moliner 50, E-46100 Burjassot, Valencia, Spain, and Laboratoire de Physique des Solides, CNRS UMR-5477, 118 route de Narbonne, UniVersite´ Paul Sabatier, F-31062 Toulouse, France ReceiVed: February 22, 2002; In Final Form: June 10, 2002

A series of cyanide-bridged, iron(II) spin-crossover coordination polymers of formula Fe(py)2[M(CN)4] (M ) Pd or Pt; py ) pyridine) and Fe(pz)[M(CN)4]‚2H2O (M ) Ni, Pd, or Pt; pz ) pyrazine) have been studied by recording the Raman and infrared (IR) spectra of their low-spin (LS) and high-spin (HS) forms in the solid state. Spectral changes upon metal and ligand substitution were used to guide the assignment of vibrational modes. Vibrational entropy changes upon spin transition were analyzed within the harmonic approximation. The results confirm the major contribution of the Fe-ligand vibrations to the overall entropy change associated with the spin transition (∼60%), butscontrary to expectationssreveal significant changes in other intra- and intermolecular vibrations, of possible relevance to the high cooperativity of the spin transition.

Introduction Octahedral FeII spin-crossover (SC) complexes have received much attention from a theoretical point of view, and also because of their possible applications in memory and display devices and as molecular switches.1,2 Of particular interest for the design of materials with enhanced properties is the understanding of cooperative interactions in the solid state leading to first-order spin transitions accompanied eventually by large hysteresis † The authors dedicate this contribution to Professor Franc ¸ ois Varret on his 60th birthday. * Corresponding authors. E-mail: [email protected]; boussek@ lcc-toulouse.fr. ‡ The Queeen’s University of Belfast. § CNRS UPR-8241. | Universidad de Valencia. ⊥ CNRS UMR-5477.

loops.2 Concerning the thermodynamic aspects of SC phenomena, the associated entropy change (∆S) has been the focus of several experimental and theoretical studies1d,3 since the original work of Sorai and Seki.4 These authors pointed out for the first time the importance of this entropy change as controlling the stability of the high-spin (HS) form at high temperature over the (lower enthalpy) low-spin (LS) form. Less well-recognized is the fact that the cooperativity in the solid state may also have an entropic origin, through the anharmonicity of vibrations.5 Though results on a family of SC compounds appear to indicate a correlation between the cooperativity and the entropy change,6 the experimental data available so far do not afford a sufficient basis for assessing the validity of this hypothesis.2a Characterization of the vibrational properties of HS and LS forms is central to the above considerations since ∆S has a predominantly vibrational origin. Here, a question immediately

10.1021/jp025678a CCC: $22.00 © 2002 American Chemical Society Published on Web 08/29/2002

9702 J. Phys. Chem. B, Vol. 106, No. 38, 2002 arises as to which vibrational modes are primarily involved. In the case of iron(II) complexes, the increase in the number of the antibonding eg electrons upon LS(t2g6) f HS(t2g4eg2) transition weakens significantly the metal-ligand bonds. Thus, the vibrational modes most affected by the change in spin state are, a priori, the metal-ligand stretching and bending frequencies. It is generally assumed that the vibrational entropy stems roughly equally from the six stretching and nine deformation modes associated with the idealized FeN6 core of the molecule, with other low-frequency intra- and intermolecular or lattice modes having only a minor contribution.1 Unfortunately, spectroscopic data on which to base consideration of the contributions from different vibrations are rather incomplete. The most extensive studies are those of Takemoto and Hutchinson concerning isotope-substituted Fe(phen)2(NCS/Se)2 compounds.7 Far-IR studies on some other compounds have also been performed.1b Recently, these data have been complemented by Raman spectroscopic8-10 and nuclear inelastic scattering measurements11 as well as by density functional theory calculations.8b,11 However, more extensive data are clearly needed in order to calculate more precisely the different vibrational contributions. This, in turn, would lay a firmer basis for improved theoretical treatments incorporating vibrational effects.5 In a previous paper,10 the Raman spectra of Fe(phen)2(NCS)2 were analyzed using the assumption of an average frequency representative of the FeN6 core of the molecule. The results supported the proposition of Sorai and Seki4 that the intramolecular vibrations represent a primary contribution to the overall entropy change. In a recent paper9 the inherent limitations of the average frequency approach have been addressed by summing the entropy terms associated with the different vibrational modes. The purpose of the present paper is to further improve this latter approach and to gain a deeper insight into the role of vibrational properties in relation to the spin transition. The systems chosen for study are a group of cyano-bridged, Hofmann-like, coordination polymer compounds (see Figure 1) of formulas Fe(py)2[M(CN)4] (M ) Pd or Pt; py ) pyridine) and Fe(pz)[M(CN)4]‚2H2O (M ) Ni, Pd, or Pt; pz ) pyrazine), displaying a variety of Fe-ligand and other low frequency vibrational modes. The remarkable feature of these complexes is the high cooperativity of the spin transition induced by the network structure and associated with large hysteresis loops. Moreover, the spin transition occurs close to room temperature and is accompanied by a dramatic change of color from orange or yellow (HS form) to garnet (LS form). Experimental Section The samples of coordination polymers were prepared as previously described.12 A Spectra Physics 3900 Ti:sapphire laser pumped by an Ar+ laser (Spectra Physics 2025) was used for Raman excitation at 785 nm. Spectra were recorded by means of a Princeton Instruments CCD detector (LN/UV-1152), coupled to a JobinYvon spectrograph (HR640) with a spectral resolution of 3 cm-1. Raman signals were collected at 180° to the incident laser beam in the 170-2400 cm-1 frequency range. The Rayleigh scattering was removed using a holographic notch filter. The pure powder samples were enclosed in the sample holder of an Oxford Instruments Optistat-DN cryostat that allowed the recording of spectra in the vicinity of the spin transition, hence enabling a distinction between temperature and spin-transition effects. To reduce the risk of sample decomposition, laser power was kept low (10 mW) and a cylindrical lens was put between

Molna´r et al.

Figure 1. Perspective view of the structure of the complexes (a) Fe(py)2[M(CN)4] (M ) Pd or Pt) and (b) Fe(pz)[M(CN)4]‚2H2O (M ) Ni, Pd, or Pt).

the laser and the sample. To observe the low-frequency HS modes (below 600 cm-1), higher laser power (200 mW) was necessary on account of the low signal level. In this case, decomposition problems were avoided by rotating the samples. Spectra close to the laser line (30-310 cm-1) were acquired using a Dilor XY1800 triplemate spectrograph coupled to a Princeton Instruments CCD detector. In this latter configuration, the 647.1 nm line of a Kr+ laser (Coherent Radiation Innova) was used as the excitation source with laser power of 10 mW. The exciting radiation was directed through an optical microscope, and the spot was focused on the sample, enclosed in a small liquid nitrogen cryostat, via a ×40, long working distance objective. The scattered light was collected in a backscattering configuration, using the same microscope objective, either at room temperature or at 150 K. Owing to the microcrystalline nature of the samples, polarization of the scattered light was not taken into account. IR spectra of the compounds were recorded using a PerkinElmer Spectrum-GX FT-IR spectrometer. It is well-known that SC behavior is considerably influenced by mechanical treatments (e.g., ball-milling);1 thus several sample preparation methods

CN--Bridged FeII SC Coordination Polymers

Figure 2. (a) Raman and (b) micro-Raman spectra of high- and lowspin Fe(pz)[Pd(CN)4]‚2H2O.

(KBr and polyethylene disks, Nujol mull) were tried with powders either as-received or mortar-crushed. Spectra were taken either at room temperature in the 2500-250 cm-1 range or at 100 K between 2500 and 400 cm-1. Results and Discussion Raman spectroscopy yielded high-quality vibrational data (e.g., see Figure 2 and Figures S (Supporting Information)). No evidence of sample decomposition due to laser irradiation was observed. For all compounds investigated, Raman spectra of the LS isomers were considerably more intense than the HS spectra (by a factor of ∼10-20). The spin-transition temperatures observed by Raman spectroscopy corresponded well to the magnetic hysteresis curves.12 Raman spectra indicated a complete spin transition for the Pd-pz and Pt-pz complexes and an incomplete spin transition for the others, in good accord with the magnetic measurements. In the Ni-pz complex small impurity content was also detected. On the other hand, IR spectra displaying discernible LS and HS features could only be recorded for the Pd-pz and Pt-pz compounds. IR spectra of crushed powders showed either no or, in some cases, incomplete spin-crossover. For coarse (unground) samples, the IR spectra from the rough, crystalline powders were generally of poor quality. Overall, the vibrational spectra of the complexes proved to be similar with small but significant differences. The main Raman peaks and, where available, those from IR spectra are tabulated in Tables 1-3. Three main groups of vibrational frequencies occur for each

J. Phys. Chem. B, Vol. 106, No. 38, 2002 9703 compound. These can be assigned to the CN stretching (around 2200 cm-1), internal vibrations of py or pz (between 1700 and 600 cm-1), and low-frequency modes below 600 cm-1 involving mainly metal-ligand vibrations in the cyanide-bridged sheet structure. Assignment of Vibrational Modes. The assignment of CN stretch and ligand modes is relatively easy on the basis of the literature data, but that of the low-frequency modes is more complicated. We recall briefly that the HS crystal structure of the complexes consists of planar, polymeric sheets formed from square-planar MII(CN)4 ions bridged by six-coordinate FeII ions. In the py complexes the neighboring layers are shifted by a symmetry operation of the monoclinic space group (C/2m),13 while the structure of the pz derivatives differs in that the bidentate pz ligands bridge the iron atoms; thus no shift between the layers occurs and the space group is tetragonal (P4/m).12 In practice, we could find no spectroscopic evidence of significant lattice effects on the symmetry of intramolecular vibrations. Indeed, the vibrations of the py (pz) molecule could be assigned to the molecular group C2V (D2h) by assuming that the selection rules in the crystal are the same as in the isolated state. The remaining vibrations were assigned to the sheet structure having a somewhat idealized point group symmetry of D4h. A similar conclusion has been reached by Akyuz et al. in their study of isostructural py complexes.14 The CN stretch, as expected, appears around 2200 cm-1 as a well-resolved doublet (symmetric and asymmetric stretches) in both Raman and IR spectra (see Table 3). The additional IR activity may result from crystalline state splitting. Compared to the corresponding K2M(CN)4 compounds,15 ν(CN) modes are shifted to higher frequencies (40-50 cm-1), which is a general trend when going from the terminal (M-CN) to the bridging (M-CN-M′) cyanide ligands.16 Assignment of internal modes of pyridine17 and pyrazine18 is fairly straightforward. They appear in the mid-IR region mainly between 600 and 1600 cm-1 (see Tables 1 and 2). It has long been recognized that the majority of these bands recur on a band-for-band basis in the spectra of their complexes, though discrepancies might occur in the solid state. Compared to the free ligands, a small upward shift of the wavenumbers (0-30 cm-1) occurs upon complexation due primarily to kinematic coupling.16 Larger shifts (ca. 40-70 cm-1) are observed only for certain low-frequency modes. Spectral features below 600 cm-1 are attributable mainly to metal-ligand vibrations, but their assignment is difficult because of the low signal intensity and the strong coupling between the different modes. However, a major simplifying feature is the apparent absence of internal py and pz bands in this spectral region. It is also known that the “metal-centered” deformation modessδ(CMC), δ(NFeN)sappear at very low frequencies,16 usually well below 200 cm-1. The large, unresolved spectral features below 100 cm-1 should be associated mostly with external modes (see Figure 2B). It follows that any mode between 200 and 600 cm-1 can be attributed without too much uncertainty to coupled vibrations in which the major involvement comes from the ν(Fe-N), ν(M-C), and δ(MCN) modes. Involvement of the latter two mode types should be readily discernible since they would be expected to be very sensitive to the metal (M) substitution. On this basis, several of the features can be assigned as indicated in Table 3 by comparison with the thoroughly analyzed spectra of K2M(CN)4 compounds.15 Considering now the remaining “FeN6 modes”, the stretching modes are expected to have the highest frequency. Those that are largely insensitive to the ligand substitution can

9704 J. Phys. Chem. B, Vol. 106, No. 38, 2002

Molna´r et al.

TABLE 1: Main Vibrational Wavenumbers (in cm-1) of Pyrazine in the Compounds Fe(pz)[M(CN)4]‚2H2O (M ) Ni, Pd, Pt) and Their Assignmentsa low-spin form Ag Ag B2g B1u B3u B3u B1u Ag B2g B1u B3u Ag B2g B2u B2u

νringc νringd δCHc δCHd δringc γringd γCHd combinations

high-spin form

Ni

Pd

Pt

Pt

Pd

1607s 1031s

1605s 1032s

1608s 1034s

1604m 1028m

1601m 1027s

1489w 1419s 1157m 1053s 1231m

1420s 1157m 1053s 1230m

1603m 1029s 1586w 1486w 1416m 1158m 1051s 1232m

1126m 1085m 644m

1126m 1086m 643s

1128m 1083m 645m

466sh 804s 1711m 1357w

466m 806s 1710m 1357m

468m 803s

528w 1216s

528w 1216m

1486w 1420m 1177m 1054m 1228s 1368w 1126w 1087w 674s

1230s 1370w 678s 791w

492m 826s 1709m 1357w 1473m 552w 1215m

nonassignedd

1418m 1178m 1053m 1231s 1370w 1126w 1086w 675s 780w 827s 1710s 1355m 1473m 555w

Ni

pyrazinea 1580s 1016s 1525m 1483m 1411s 1149s 1018s 1233s 1346w 1130s 1063s 602w 704s 418s 785s 1694

1384m 723w, 757, 792

a Abbreviations: s, strong; m, medium; w, weak; ν, stretching; δ, in-plane bending; γ, out-of-plane bending. b Taken from ref 18. c Observed in Raman spectra. d Observed in IR spectra.

TABLE 2: Main Vibrational Wavenumbers (in cm-1) of Pyridine in the Compounds Fe(py)2[M(CN)4] (M ) Ni, Pd, Pt) and Their Assignmentsa low-spin form νringd

νringe

δCHd δCHe δringd δringe γringe γCHe γCHd nonassignedd

A1 A1 A1 B1 A1 A1 B1 A1 B1 A1 A1 A1 B1 B1 A1 B1 B1 B1 A1 B1 A1 B2 B2 B2 B2

high-spin form

Pd

Pt

Pt

Pd

1609m 1048w 1019s 1572w 1488w

1607m 1046w 1018s 1570w 1485w

1603m 1039m 1012s 1574w

1602w 1040w 1012s 1573w

1224m 1222m 1149w 1150m 1072m 1072m

651m 641w 760m

1873w

650m 640m 760m

1604s 1575 1488 1447 1039 1011 1226m 1151m 1070m 1220 1153 1072 653m

1604s 1574w 1488m 1447s 1039s 1011m 1222w 1152w 1071w 1220m 1153m 1071m 652w 616? 651 651w 629 629m 753m 753m 420 420 946 946 690 690s 1872w

Nic

1604v 1575m 1487s 1446w 1038s 1010s

1220s 1153s 1070s 651w 628m 751s 420m 946m 689s

pyridinea 1580 1029 992 1570 1480 1582 1574 1482 1438 1029 990 1218 1144 1069 1217 1144 1069 652 605 652 604 746 405 939

a

Abbreviations: s, strong; m, medium; w, weak; ν, stretching; δ, in-plane bending; γ, out-of-plane bending. b Taken from ref 17. c Taken from ref 14. d Observed in Raman spectra. e Observed in IR spectra.

be identified as ν(Fe-NNC) vibrations. The ligand-sensitive bands appearing between 300 and 320 cm-1 can finally be assigned as ν(Fe-Npz) modes. Table 3 summarizes the findings. While these assignments must remain somewhat tentative at this stage, the spectra are by far the most clear-cut among the spincrossover complexes studied up to now. It is perhaps surprising that the “separated unit” (FeN6, M(CN)4, pz, py) approach adopted here applies to such low-frequency vibrations, but the internal consistency of the results gives some confidence that this approach is a reasonable one.

Spectral Changes upon Spin-Crossover. The spin transition influences the intensity profiles and is associated with significant frequency shifts in the vibrational spectra of all the complexes investigated. However, since there is no single straightforward hypothesis that could be used to treat intensity changes between the HS and LS entities, the discussion will be confined to consideration of the frequencies alone. The CN-stretching modes are shifted to higher wavenumbers following the HS to LS transition, similar to the better known NCS complexes, though compared to these, which exhibit ν(CN) frequency shifts of 30-50 cm-1 for the HS f LS transition,1 the corresponding frequency changes here are significantly smaller. The shift is largest in case of the pz complexes (10-15 cm-1) and rather less for py complexes (6-7 cm-1). A possible origin for this effect might be either enhanced kinematic coupling or subtle changes in the population of N-C orbitals.1b The majority of the low-frequency modes suffer dramatic changes upon spin transition. The general trend is a large decrease of the frequencies when going from the LS to the HS state. As expected, the highest frequency changes (160-180 cm-1) are observed for the Fe-N stretching frequencies. These shifts are comparable with values reported for other spincrossover compounds.1 Unexpectedly, the δ(NCM) vibrations suffer very significant shifts (∼150 cm-1) and the ν(CM) modes are also altered considerably (40-60 cm-1), indicating that these modes are strongly coupled to the Fe-ligand or lattice modes. By comparison, in the Fe(phen)2(NCS)2 complex the δ(NCS) and ν(CS) modes are insensitive to the spin change.8 It is noteworthy also that the external modes suffer important changes too, but these shifts cannot be quantified at present. The py and pz internal modes are rather insensitive to the spin transition, but some interesting observations can be made. In general, the δCH modes showed no shift within the measurement error. The observed small frequency shifts (∼2-6 cm-1) of the νring modes can be understood in terms of a weak kinematic coupling with metal-ligand vibrations. (Temperature effects can be neglected because the HS and LS spectra have been recorded close ((20 K) to the transition temperature.) Only certain low-frequency modes showed larger frequency changes

CN--Bridged FeII SC Coordination Polymers

J. Phys. Chem. B, Vol. 106, No. 38, 2002 9705

TABLE 3: Main Vibrational Wavenumbers (in cm-1) Associated with the Polymeric Sheet Structure in the Complexes and Their Tentative Assignmentsa pyrazine low spin form Ni ν(CN)d ν(CN)d ν(CN)e hot band? ν(CM)d ν(CM)d ν(CM)e δ(MCN)d δ(MCN)e γ(MCN)e ν(FeNNC)d ν(FeNNC)d ν(FeNcycle)d δ(NFeN)d nonassignedd δ(CMC)d combinationd c

Pd

Pt

Pt

A1g 2192m B1g 2183m Eu A1g B1g Eu Eg Eu A2u B1g A1g A1g ? B1g

pyridine low-spin form

high-spin form

2206m 2216m 2206m 2193m 2197m 2183m 2183s 2184s 2172s 2147w 528w 543m 580m ∼520 518w 530m 567m weak, broad 529 ∼520 503w 428w 475m 496m 341m ∼490 464s ∼496 480sh 388w 385m 397m ∼215sh? 394w 390m 402m 226m 320w 303m 311m 175m 215m 203m 211m 254/264 270w 275w 105m 105m 105w 2277w 2275w 2249

Pd 2197m 2181m 2175s 2151m 502m

Ni

Pd

2182m 2202s 2172m 2188s 2154m 2141m 486m 538m 530m

504w 319m 421s 438sh

324m 438w 444w

223m 177m

231m 176m

478w 375sh 383w

189m 255w 105w 100w 2246w 2246w

Pt

K2M(CN)4b

high-spin form Pt

Nic

Pd

2208s 2189s

2202s 2182s 2171s 2145w 572m 496 562m weak, broad ∼521 505 495m 341m 460 479 378w 395m 221m 160m 191m 124w 125w 100w 2246w 2246w

2196m 2181s 2173s 2146w 491 500 315m 420 437

Pt

Pd

Ni

2165 2159 2142 2145 2147 2133 2134 2134 2127 2123 2121 467 424 405 broad 415 506 485 540 323 296 303 407 383 422 468 443

2159s 2133w 550w 435s 444w

217m 161m 132/143

132/146 95

2246w

a Abbreviations: s, strong, m; medium; w, weak; sh, shoulder; ν, stretching; δ, in-plane bending; γ, out-of-plane bending. b Taken from ref 15. Taken from ref 14. d Observed in Raman spectra. e Observed in IR spectra.

TABLE 4: Measured Relative Frequency Changes (νLS/νHS) of Selected Raman Modes upon the Spin Transition and Associated Vibrational Entropy Changes (∆Svibi in J K-1 mol-1) Calculated Using Eqs 2 and 3 Ni-pz mode

νLS/νHS

Pd-pz ∆Svibi

νLS/νHS

Pt-pz ∆Svibi

νLS/νHS

Pd-py ∆Svibi

νLS/νHS

Pt-py ∆Svibi

νLS/νHS

∆Svibi

ν(Fe-NNC) 1.71 3.7 1.75 3.6 1.78 3.6 1.76 3.4 1.75 3.3 ν(Fe-Ncycle) 1.82 4.4 1.71 3.8 1.78 4.0 δ(MCN) 1.32 1.8 1.49 2.2 1.45 1.8 1.52 2.0 1.45 1.6 ν(M-C) 1.09 0.38 1.08 0.33 1.11 0.37 1.09 0.30 δ(ring) 1.05 0.19 1.05 0.14 1.05 0.11 1.04 0.08 ν(ring)a 1.002 ∼10-3 1.005 ∼10-3 1.006 ∼10-3 1.007 ∼10-4 1.007 ∼10-4 ν(N-C) 1.005 ∼10-4 1.004 ∼10-5 1.004 ∼10-5 1.004 ∼10-6 1.004 ∼10-6 Tc 292 250 230 210 212 ∆Svib(total)b 55d 70 75 55 57 ∆Svib(FeN6)c 47 ( 15 42 ( 18 44 ( 18 a 1030 cm-1 mode for pz complexes, 1015 cm-1 mode for py complexes. b Calculated by eq 1 using ∆S data (extrapolated at 100% of spin conversion) from ref 12. c Estimated vibrational entropy change associated with the FeN6 core (see text for details of calculation). d Ill-determined due to impurities.

(10-30 cm-1) upon spin transition. This behavior can be explained by the coupling of these modes to various Fe-N vibrations.17,18 It should be noted that in the Fe(phen)2(NCS)2 complex the δring modes showed similar changes.8 Data in Tables 1-3 reveal also that the frequency shifts upon HS to LS transition are often similar to those observed when the spectra of pure ligands and their complexes are compared. Bayer and Ferraro noted that the vibrational spectra of pyrazine under pressure show similarities to the corresponding spectra of its metal complexes.19 They suggested that this might indicate that complexation involves an “internal pressure effect”. Following this idea in the present instance, it might be suggested that such a “pressure effect” is enhanced upon the HS to LS transformation, leading to further shift in the frequencies of various ligand modes (pz, py, and also M(CN)4). In this context, it is also worth mentioning that the frequencies of C-N, C-M, and Fe-N stretches as well as the lattice vibrations are systematically higher in the pz complexes compared to the py complexes (both HS and LS forms). This could also be explained by an internal pressure effect arising from the more rigid three-dimensional structure of the pz complexes. Such an internal pressure could also be responsible for the higher transition temperature (see Table 4) of the pz complexes. Entropy Changes upon Spin-Crossover. Bearing in mind the somewhat tentative nature of the above assignments, estimation of the entropy changes associated with the different

vibrations will now be considered. The entropy change upon spin transition can be represented as the sum of electronic, vibrational, configurational, rotational, and translational terms. The two latter are effectively excluded from consideration in the solid state. Moreover, in the absence of orientational disorder the configurational term can also be neglected. The electronic term may contain contributions from both spin and orbital degeneracy. For octahedral iron(II) spin-crossover complexes (1A1g f 5T2g), the orbital degeneracy is usually removed; thus the electronic entropy may be obtained directly from the spinmultiplicity change as 13.4 J K-1 mol-1.4 On the other hand, the measured overall entropy change for these complexes varies between 68 and 85 J K-1 mol-1,12 where the “missing” entropy is thought to be of vibrational origin:

∆Svib = ∆S - ∆Sel

(1)

In the harmonic approximation, the vibrational entropy of an oscillator i of frequency ν (s-1) can be expressed as follows:10

Svibi ) k[Ω tanh(Ω) - ln(2 sinh(Ω))]

(2)

where Ω equals hν/2kT. The entropy change of the ith oscillator upon the spin-transition can be obtained simply by

∆Svibi ) Svibi(νHS,Tc) - Svibi(νLS,Tc)

(3)

where the transition temperature Tc is defined by ∆G(Tc) ) 0.

9706 J. Phys. Chem. B, Vol. 106, No. 38, 2002

Figure 3. Vibrational entropy change upon spin transition as a function of the vibrational wavenumber. The curves were calculated for a unique mode using eqs 2 and 3 with νHS ) νLS/1.5 for different values of Tc between 25 and 300 K. Highlighted in bold is the Tc range of the complexes under study.

Using eqs 2 and 3 we have calculated the contribution of some selected vibrational modes to ∆Svib (see Table 4). Of special interest is the entropy change associated with the 15 vibrations of the idealized FeN6 core. As explained in ref 10, a complete determination cannot be expected even from a variety of experimental and theoretical sources. However, reasonable estimates can be obtained either by using an average frequency in eq 210 or by summing up the Svibi contributions over the observed modes and applying an appropriate weighting for the unknown ones.9 While the former method has the advantage of not requiring the assignment of individual modes, it will, at best, give a gross approximation. On the other hand, the summation method can provide a fairly good estimation even if several modes remain unknown provided that the entropy varies smoothly over the appropriate frequency range. Indeed, as shown in Figure 3, the vibrational entropy is a relatively “smooth” function of the frequency between 0 and 400 cm-1 if Tc is as high as in the case of the present group of complexes. In other words, in this low-frequency/high-temperature limit any change in entropy can be unambiguously attributed to shifts in vibrational frequencies because the population of vibrational modes is no longer frequencydependent within the implied range.20 The vibrational entropy changes associated with the FeN6 core are reported in Table 4 for the pz complexes, which allow for a more reliable estimation.21 The corresponding error bars are determined mostly by the fact that the relative frequency changes of the unknown FeN6 modes (νLS/νHS) may differ from those of the assigned modes. However, an upper and a lower limit for νLS/νHS associated with the FeN6 modes can be established. The upper limit (∼1.75) is given by the symmetric Fe-N stretching mode, which is known to be the most affected by the spin state change.1 A reasonable lower limit (∼1.5) is effectively set by the δ(NCM) mode, which is expected to be less influenced by the spin change of the FeII ion. Using these limits, one can estimate the error incurred in applying the weighting method (see Figure 4). Clearly, this error must remain relatively large at this stage (see Table 4), with a significant reduction depending on more firmly based band assignments, e.g., by means of isotopic substitution. Notwithstanding the approximations inherent in the data of Table 4, the results show clearly that the main contribution to the vibrational entropy change comes from the FeN6 core vibrations (60 ( 20%), but also that other modes make a

Molna´r et al.

Figure 4. Vibrational entropy change upon spin transition as a function of the relative frequency change. The curve was calculated for a unique mode using eqs 2 and 3 with ωLS ) 200 cm-1 and Tc ) 290 K. (See text for the meaning of the dotted lines.)

significant contribution. The influence of internal pz and py modes is negligible (