Subscriber access provided by USC Libraries
Article
Widespread Occurrence and Accumulation of Bisphenol A Diglycidyl Ether (BADGE), Bisphenol F Diglycidyl Ether (BFDGE) and their Derivatives in Human Blood and Adipose Fat Lei Wang, Jingchuan Xue, and Kurunthachalam Kannan Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.5b00096 • Publication Date (Web): 13 Feb 2015 Downloaded from http://pubs.acs.org on February 18, 2015
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 27
Environmental Science & Technology
1
Widespread Occurrence and Accumulation of Bisphenol A Diglycidyl Ether
2
(BADGE), Bisphenol F Diglycidyl Ether (BFDGE) and their Derivatives in
3
Human Blood and Adipose Fat
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Lei Wang†, Jinchuan Xue‡, and Kurunthachalam Kannan‡,¶,*
†
Tianjin Key Laboratory of Environmental Remediation and Pollution Control / Ministry of Education Key Laboratory of Pollution Processes and Environmental Criteria, Nankai University, Tianjin 300071, China
‡
Wadsworth Center, New York State Department of Health, and Department of Environmental Health Sciences, School of Public Health, State University of New York at Albany, Empire State Plaza, P.O. Box 509, Albany, New York 12210-0509, United States
¶
Biochemistry Department, Faculty of Science and Experimental Biochemistry Unit, King Fahd Medical Research Center, King Abdulaziz University, Jeddah 21589, Saudi Arabia
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
*Corresponding author: K. Kannan Wadsworth Center Empire State Plaza, P.O. Box 509 Albany, NY 12201-0509 Tel: 1-518-474-0015 Fax: 1-518-473-2895 E-mail:
[email protected] For submission to: Environmental Science & Technology
1 ACS Paragon Plus Environment
Environmental Science & Technology
37
TOC
38 39 40
ABSTRACT
41 42
Despite the widespread use of bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl
43
ether (BFDGE) in various consumer products, studies on human exposure to these compounds
44
are scarce. In this study, BADGE, BFDGE, and seven of their derivatives were determined in
45
human adipose fat and blood plasma samples collected from New York City, NY, USA.
46
Bisphenol A bis (2,3-dihydroxypropyl) ether [BADGE▪2H2O] was the major BADGE derivative
47
found in 60% of the adipose samples and 70% of the plasma samples analyzed. High
48
concentrations and detection frequencies of BFDGE were found in both adipose and plasma
49
samples. BFDGE concentrations in adipose fat ranged from 19.1 to 4500 ng/g wet weight. A
50
significant correlation between BADGE or BFDGE and their derivatives in adipose and plasma 2 ACS Paragon Plus Environment
Page 2 of 27
Page 3 of 27
Environmental Science & Technology
51
samples suggested hydration of these reactive compounds in humans. A significant positive
52
correlation existed between BADGEs (i.e., the sum of BADGE and its five derivatives) and
53
BFDGEs in adipose samples, which suggested similar exposure sources and pathways for these
54
compounds in humans. Bisphenol A (BPA) also was analyzed in adipose fat and plasma, and its
55
concentrations were positively correlated with those of BADGEs, which confirmed co-exposure
56
of BADGEs and BPA in humans.
57 58
INTRODUCTION
59
Bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) are widely
60
used in the protective coatings of food and beverage cans and in paints and adhesives (1, 2).
61
These compounds also are used as monomers in the production of epoxy-based polymers and as
62
additives for the elimination of surplus hydrochloric acid in polyvinyl chloride (PVC) production
63
(1). These are high production-volume chemicals. For instance, the annual global production of
64
BADGE was estimated at 957 thousand metric tons in 2003 (2).
65
BADGE is a reactive molecule and has been reported to bind to nucleic acids (3). In vitro
66
studies have shown mutagenic and teratogenic effects of BADGE and its derivatives
67
(collectively referred to as BADGEs in this study) (4, 5). Bisphenol A bis (2,3-dihydroxypropyl)
68
ether [BADGE▪2H2O], the stable hydrated product of BADGE, was reported to have endocrine
69
disrupting potentials even greater than those of bisphenol A (BPA) (6). The antagonistic activity
70
of a chlorohydrin derivative of BADGE toward androgen has been reported (7). In addition,
71
genotoxicity and cytotoxicity as well as developmental and reproductive toxicity of BADGEs
72
have been reported in laboratory animals (5, 8-10). A reduction in a follicle-stimulating hormone
73
in male workers exposed to BADGE was reported (11). The European Commission for food
3 ACS Paragon Plus Environment
Environmental Science & Technology
74
contact applications has set a migration limit for ten derivatives of BADGE from food cans at 1
75
mg/kg (12).
76
BADGE and its hydrated as well as chlorinated derivatives are present in many canned
77
foods at concentrations on the order of several micrograms to milligrams per kilogram (13-17).
78
Studies on human exposure to BADGEs, however, are scarce. Limited human biomonitoring
79
studies conducted in our laboratory have shown that BADGE▪2H2O and BADGE are widespread
80
in urine specimens from Greece, China, India, and the USA (18-20). Considering the moderately
81
high lipophilicity (i.e., Kow; see Table 1) of BADGE and its derivatives, there is a potential for
82
these chemicals’ accumulation in adipose tissue of humans. Because BADGE has been reported
83
to elicit adipogenic gene expression in stromal stem cells (21), it is relevant to assess
84
accumulation in human adipose fat. Nevertheless, no earlier studies have reported the occurrence
85
of BADGEs in human fat.
86
BFDGE is also used as a coating material and has been detected in canned foods (22).
87
Cytotoxic, genotoxic, mutagenic, and endocrinal effects of BFDGEs have been reported in in
88
vitro studies (7, 10, 23, 24). For instance, BFDGE was shown to elicit cytotoxic effects on
89
human colorectal adenocarcinoma cell line (CACO-2), by inducing morphological changes, cell
90
detachment from substratum, inhibition of cell proliferation and F-actin depolymerization (10).
91
BFDGE was also reported to induce mutagenic effects in prokaryotic cell bioassays, and to
92
increase frequency of sister chromatid exchanges and micronuclei in human peripheral blood
93
lymphocytes (23). In addition, chlorohydrin derivative of BADGE was reported to be a strong
94
antagonist for androgen receptor (7). However, no earlier studies have reported the occurrence of
95
BFDGEs in human tissues.
4 ACS Paragon Plus Environment
Page 4 of 27
Page 5 of 27
Environmental Science & Technology
96
In this study, concentrations of six BADGEs, i.e., BADGE, BADGE▪H2O, BADGE▪2H2O,
97
bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) ether [BADGE▪HCl▪H2O],
98
bisphenol A
99
(3-chloro-2-hydroxypropyl) glycidyl ether [BADGE▪HCl], and three BFDGEs, i.e., BFDGE,
100
bisphenol F bis (2,3-dihydroxypropyl) ether (BFDGE▪2H2O), and bisphenol F bis
101
(2-chloro-1-propanol) ether (BFDGE▪2HCl), were determined in 20 adipose fat tissue and 20
102
blood plasma samples collected from New York City. BPA also was analyzed in these samples
103
to examine the association of this compound with BADGE/BFDGE. The objectives of this study
104
were to (i) determine the occurrence, distribution, and bioaccumulation potentials of
105
BADGEs/BFDGEs in human tissues; and (ii) elucidate the correlation between various
106
BADGE/BFDGE derivatives and BPA in human tissues.
bis
(3-chloro-2-hydroxypropyl)
ether
[BADGE▪2HCl],
bisphenol A
107
108
MATERIALS AND METHODS
109
Chemicals. Analytical standards of BADGE (≥95%) and its derivatives, BADGE·H2O (≥95%),
110
BADGE·2H2O (≥97%), BADGE·HCl·H2O (≥95%), BADGE·HCl (≥90%), BADGE·2HCl
111
(≥97%), BFDGE·2H2O (≥95%), and BFDGE·2HCl (≥90%), as well as BPA (>99%) and
112
β-glucuronidase from Helix pomatia (145700 units/mL β-glucuronidase and 887 units/mL
113
sulfatase), were purchased from Sigma-Aldrich (St. Louis, MO). BFDGE (98%) was purchased
114
from
115
2-hydroxy-4-methoxybenzophenone (13C12-BP-3) (99%) and
116
from Cambridge Isotope Laboratories (Andover, MA). D6-BADGE (99%) was purchased from
117
Toronto Research Chemicals (North York, Ontario, Canada). The molecular structures and
118
selected physicochemical properties of the target compounds are shown in Figure S1 (Supporting
LGC
standards
(Teddington,
Middlesex,
UK). 13
13
C-isotopically
labeled
C12-BPA (99%) were purchased
5 ACS Paragon Plus Environment
Environmental Science & Technology
119
Information) and Table 1, respectively. Milli-Q water was prepared using an ultrapure water
120
system (Barnstead International, Dubuque, IA). The stock solutions of target analytes and
121
internal standards were prepared at 1 mg/mL in methanol and stored at -20° C.
122
Sample Collection. A total of 20 human adipose fat samples were originally collected in
123
2003–2004 from donors who underwent liposuction in New York City. The samples were stored
124
in solvent-cleaned I-Chem jars at -20° C, as recommended by the National Human Monitoring
125
Program (25). The samples were from 15 females (age: 18–58 years) and 5 males (age: 32–51
126
years). Additional demographic information of the donors is shown in Table S1 (Supporting
127
Information). Further details on the sample collection have been provided elsewhere (26).
128
Plasma samples (n = 20) were collected in 2002–2003 from adult male donors (age: 24–58 years)
129
in New York City. Further details of the plasma samples are shown in Table S1. Institutional
130
Review Board approvals were obtained from the New York State Department of Health for the
131
analysis of samples.
132
Sample Preparation. For adipose fat tissue samples, 200 to 300 milligrams of sample were
133
accurately weighed and spiked with 50 µL of methanol containing 13C12-BPA, D6-BADGE, and
134
13
135
quantification of BADGE, BFDGE, BADGE·H2O, and BADGE·HCl (analytes with epoxy
136
moiety) (Table S2; Supporting Information) (27), whereas
137
BADGE·2H2O, BADGE·HCl·H2O, BADGE·2HCl, BFDGE·2H2O, and BFDGE·2HCl (analytes
138
without epoxy moiety).
139
equilibration for 30 min at room temperature, 5 mL of acetone were added into the sample. The
140
mixture was homogenized in a mortar, and the extract was then transferred to a 15 mL
141
polypropylene (PP) tube by washing with 2 mL of methanol. The combined extracts were
C12-BP-3 (200 ng/mL each). D6-BADGE was used as the internal standard (IS) for the
13
13
C12-BP-3 was used as the IS for
C12-BPA was used as the IS in the quantification of BPA. After
6 ACS Paragon Plus Environment
Page 6 of 27
Page 7 of 27
Environmental Science & Technology
142
concentrated to ~2 mL under a gentle nitrogen stream (to remove acetone). Then an ultra-low
143
temperature (-20° C) incubation was used to separate the lipid from the solvent. After storage at
144
-20° C for 15 min, the extracts were centrifuged immediately at 4500 g for 5 min (Eppendorf
145
centrifuge 5804, Hamburg, Germany) for the separation of organic solvent and solidified lipid.
146
The supernatant was transferred and concentrated to 0.5 mL under a gentle nitrogen stream and
147
analyzed
148
(HPLC-MS/MS).
by
high-performance
liquid
chromatography-tandem
mass
spectrometry
149
Plasma samples were extracted using a liquid-liquid extraction (LLE) method. Five hundred
150
microliters of plasma samples were transferred into a 15-mL PP tube, and 50 µL of methanol
151
containing 13C12-BPA, D6-BADGE and 13C12-BP-3 (200 ng/mL each) were spiked. The samples
152
were then extracted three times each with 3 mL of ethyl acetate. The mixture was shaken in an
153
oscillator shaker for 60 min (Eberbach Corp., Ann Arbor, MI) and then centrifuged at 4500 g for
154
5 min (Eppendorf). The extracts were combined and washed with 1 mL of Milli-Q water. The
155
supernatant was transferred into a glass tube and concentrated to near-dryness under a gentle
156
nitrogen stream. Finally, 0.5 mL of methanol was added and vortex mixed for analysis by
157
HPLC-MS/MS.
158
Instrumental Analysis. Chromatographic separation and detection of analytes were
159
accomplished by the use of an Agilent 1100 Series HPLC (Agilent Technologies Inc., Santa
160
Clara, CA) interfaced with an Applied Biosystems API 2000 electrospray triple quadrupole mass
161
spectrometer (ESI-MS/MS; Applied Biosystems, Foster City, CA). Ten microliters of the sample
162
were injected onto an analytical column (Betasil® C18, 100 x 2.1 mm column; Thermo Electron
163
Corporation, Waltham, MA), which was connected to a Javelin guard column (Betasil® C18, 20
164
x 2.1 mm column). The mobile phase comprised 100% methanol (A) and 10% methanol in 7 ACS Paragon Plus Environment
Environmental Science & Technology
Page 8 of 27
165
Milli-Q water that contained 2 mM of ammonium acetate (B). Two different gradient elutions at a
166
flow rate of 200 µL/min were used for the analysis of BADGEs/BFDGEs and BPA (Table S3;
167
Supporting Information). The MS/MS was operated in the multiple reaction monitoring (MRM),
168
positive and negative ionization modes for the analysis of BADGEs/BFDGEs and BPA,
169
respectively, and the parameters were optimized by infusion of individual analytes (Table S4;
170
Supporting Information). Select MRM chromatograms of BFDGE in standard solution and in
171
human specimens are shown in Figure S2 (Supporting Information).
172
Quality Assurance and Quality Control (QA/QC). Solvent-cleaned glass jars were used to
173
store adipose fat samples. Contamination that arose from laboratory materials and solvents was
174
evaluated by the analysis of procedural blanks with every batch of samples. Recoveries of native
175
compounds spiked into procedural blanks ranged from 81% to 105%. Quantification of BADGEs
176
and BFDGEs was performed by an isotope-dilution method based on the responses of
177
D6-BADGE (for BADGE, BFDGE, BADGE▪H2O, and BADGE▪HCl),
178
BADGE▪2H2O, BADGE▪2HCl, BADGE▪HCl▪H2O, BFDGE▪2H2O, and BADGE▪2HCl), and
179
13
180
BADGEs, 3 BFDGEs, and BPA were spiked along with 13C12-BP-3, 13C12-BPA, and D6-BADGE
181
(10 ng each) and passed through the entire analytical procedure. In spiked matrices, recoveries of
182
all target compounds ranged from 98% to 125% for adipose tissue and from 94% to 107% for
183
plasma (corrected for by the recoveries of D6-BADGE or
184
recoveries of target chemicals through the analytical procedure are presented in Table S2.
13
C12-BP-3 (for
C12-BPA (for BPA). Four adipose and four plasma samples were selected randomly; 6
13
C12-BP-3 or
13
C12-BPA). The
185
Duplicate analysis of selected samples showed a coefficient of variation of