Swagelok
®
SWAGELOK Quick-Connects with single end or double end shut-off for tube to pipe, tube to tube and bulkhead tube to tube applications are available in brass and stainless steel in sizes for W , %" and V2" O.D. tubing. Flow resumed instantly and vacuum tight seal assured when connection is made. Light, compact, streamlined design. Occupies little space. For use with portable equipment and bulkhead or panel applications. Instant-acting seals iorevent loss of fluid when fitting is disconnected. No twisting, turning or wrench action necessary. Easy straight-line fingertip pull or push action for instant connecting or disconnecting.
Quick-Connects can be used with metal as well as plastic tubing. QUICK-CONNECT WITH SINGLE END SHUT-OFF SWAGELOK Quick-Connects are suggested for use with portable equipment and bulkhead panel applications. They are furnished through local distributors in sizes for VA", %" and V2" O.D. tube, available in stainless steel and brass. The SWAGELOK Quick-Connect Fitting is normally furnished with Burnt " N " O-Rings. Other O-Ring materials are available for special applications. QUICK-CONNECT WITH DOUBLE END SHUT-OFF SWAGELOK Quick-Connects with unique double end shut-off, for use on hydraulic or pneumatic lines, contain instant acting seals in both parts of the unit which completely prevent loss of any pressure from either end of the line when the fitting is disconnected. Flow is resumed instantly when the male and Ifemale units (stem assembly and body assembly) are connected. The SWAGELOK end of the Quick-Connect is assembled on the tube the same as any standard SWAGELOK Fitting. No special preparation of the tubing is necessary.
Your local Swageloksales
and service representative
Crawford Fitting Company / 29500 Solon Road / Solon, Ohio 44139 Crawford Fittings (Canada), Ltd. / Niagara Falls, Ontario, Canada © 1965 by Crawford Fitting Company, All rights reserved
can provide immediate delivery of
Circle No. 26 on Readers' Service Card
quick-connects.
