1 Determination of Calystegines in Several Tomato ... - ACS Publications

Ana Romera-Torres, Javier Arrebola-Liébanas, José Luis Martínez Vidal, Antonia. 6. Garrido Frenich*. 7. 8. Department of Chemistry and Physics, Resear...
0 downloads 0 Views 494KB Size
Subscriber access provided by Iowa State University | Library

New Analytical Methods

Determination of calystegines in several tomato varieties based on GC-Q-Orbitrap analysis and their classification by ANOVA Ana Romera-Torres, Francisco Javier Arrebola, José Luis Martínez Vidal, and Antonia Garrido Frenich J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.8b06952 • Publication Date (Web): 13 Jan 2019 Downloaded from http://pubs.acs.org on January 17, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 31

Journal of Agricultural and Food Chemistry

1

Determination of Calystegines in Several Tomato Varieties Based on GC-Q-

2

Orbitrap Analysis and Their Classification by ANOVA

3 4 5

Ana Romera-Torres, Javier Arrebola-Liébanas, José Luis Martínez Vidal, Antonia

6

Garrido Frenich*

7 8

Department of Chemistry and Physics, Research Centre for Agricultural and Food

9

Biotechnology (BITAL), University of Almería, Agrifood Campus of International

10

Excellence, ceiA3, Carretera de Sacramento s/n, E-04120 Almería, Spain.

11 12 13

*Corresponding

14

[email protected])

author (Tel. +34 950015985; fax: +34 950015008. E-mail:

15

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

16

Abstract

17

In this study, several calystegines (A3, A5, B1, B2, B3, B4 and C1) have been determined

18

in tomato. A simple extraction followed by a derivatization step with silylating agents has

19

been performed prior to their analysis by gas chromatography coupled to high resolution

20

mass spectrometry (GC-HRMS-Q-Orbitrap), which allowed the monitoring of several

21

ions at accurate mass. The validation of the method has provided suitable values of

22

linearity, trueness (73.7-120.0%) and precision (≤ 20.0%, except for calystegines B3 and

23

B4 at 0.5 mg/kg). The limit of quantitation (LOQ) was set at 0.5 mg/kg for all analytes.

24

The validated method was successfully applied to the analysis of nine different tomato

25

varieties, and calystegines A3, A5, B2 and C1 were found at concentrations ranging

26

between 0.65 mg/kg (C1) and 12.47 mg/kg (B2). Tomato varieties were classified

27

according to their calystegines content applying an analysis of variance (ANOVA).

28 29

Keywords: Calystegines, Solanum lycopersicum, tomato varieties, GC-MS analysis, Q-

30

Orbitrap, ANOVA.

31

ACS Paragon Plus Environment

Page 2 of 31

Page 3 of 31

Journal of Agricultural and Food Chemistry

32

Introduction

33

Calystegines are a group of alkaloids discovered in 1988 during a determination of

34

opines by paper electrophoresis. They were initially discovered as positives spots in

35

transformed root cultures of Calystegia sepium and further screening of intact Atropa

36

belladonna roots also revealed their presence.1 Their chemical structure contains a

37

nortropane ring system with 3, 4 or 5 hydroxyl groups (calystegines A, B or C,

38

respectively) located at various positions and with differing stereochemistry, and also

39

having an aminoketal functionality.2 Other group of calystegines, named calystegines N,

40

are characterized by a bridgehead amino group and also contains a methylated nitrogen.3

41

As iminosugars, they usually act as competitive glycosidase inhibitors and are considered

42

for treatment of lysosomal storage diseases, e.g. Gaucher disease and Fabry disease.4

43

Although it has not been established that they are the main agents, calystegines are

44

presented in Solanum dimidiatum and Solanum kwebense, which causes crazy cow

45

syndrome and maldronksiekte in South Africa.5

46

Because of their closely related structure to tropane alkaloids, calystegines occurrence

47

were investigated in several genera, such as Atropa, Datura, Duboisia, Hyoscyamus, and

48

Scopolia belonging to Solanaceae family,6 and plant families such as Convolvulaceae,7

49

Erythroxylaceae8 and Brassicaceae,9 which are well-known for the presence of tropane

50

alkaloids. Solanaceae and Convolvulaceae families have many edible fruits and

51

vegetables rich in calystegines. Tomatoes (Solanum lycopersicum L.) are the most

52

popular vegetables in the world and around 150.000 million kg were produced in 2017

53

according to data from the United Nations Food and Agriculture Organization (FAO).10

54

Recently, analytical methods focused on the determination of calystegines have been

55

reviewed.11 These polyhydroxylated alkaloids have a high water solubility and are usually

56

extracted using different proportions of methanol/water, such as 50:50 (v/v),7,8,12–17 80:20,

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

57

v/v5,18 or 20:80, v/v.14 They have also been extracted with ethanol/water (50:50, v/v)19 or

58

with 0.2% of formic acid in acetonitrile/water (50:50, v/v).20 Then, extracts were passed

59

through cation and/or anion exchange resins columns in order to purify them and after

60

that, calystegines were usually silylated by a derivatization process. Finally, although

61

calystegines have been analyzed by thin layer chromatography21 or capillary

62

electrophoresis using an indirect UV detector,22 they are usually analyzed by gas

63

chromatography coupled to mass spectrometry with a single quadrupole analyzer (GC-

64

Q-MS).7,12,15,18,19 In contrast, neither purification nor derivatization are widely reported

65

for liquid chromatography-MS (LC-MS) analysis. In these cases, triple quadrupole

66

(QqQ),16,20 Orbitrap17 and a hybrid quadrupole coupled to Orbitrap (Q-Orbitrap)20

67

analyzer have been employed.

68

High resolution MS (HRMS) instruments, e.g. time of flight (TOF) or Orbitrap

69

instruments, measure ions at a high resolution power, and provide full-spectrum data with

70

a high mass accuracy. Moreover, the capacity to determine the molecular formula of

71

analytes from accurate-mass measurements has become the most important feature of

72

HRMS,23 allowing screening of targeted and untargeted compounds. While several

73

studies have employed HRMS to analyze similar compounds such as tropane

74

alkaloids,24,25 until now, only two LC-HRMS methods have been applied to the

75

determination of calystegines.17,20

76

In general, studies have been focused on the content of calystegines in several potato

77

varieties,5,13,14,26 but so far, little information about calystegines occurrence in tomato is

78

available17,27,28 and only four calystegines have been studied. Although one study

79

analyzed seven calystegines in tomato and tomato-based product using a 250 x 4.6 mm,

80

3 µm, ACE HILIC-A column (Advanced Chromatography Technologies LTD, Aberdeen,

81

Scotland),17 a thorough investigation of several varieties has not been carried out. The

ACS Paragon Plus Environment

Page 4 of 31

Page 5 of 31

Journal of Agricultural and Food Chemistry

82

aim of this work was to evaluate the variation of calystegines (A3, A5, B1, B2, B3, B4 and

83

C1) content within and between several tomato varieties obtained under the same

84

agronomic and environmental conditions. A GC coupled to a hybrid quadrupole-Orbitrap

85

analyzer (GC-Q-Orbitrap) was used for first time allowing a highly reliable identification

86

of the compounds.

87 88

Material and methods

89

Chemicals, reagents and equipment

90

Calystegine standards (A3, A5, B1, B2, B3, B4 and C1), structures from 1-7 shown in

91

Figure 1, were kindly provided by Professor Naoki Asano of Hokuriku University

92

(Kanazawa, Japan) and they were used as reference standards for GC analysis.

93

LC-MS grade methanol (purity ≥99.9%) was supplied by Merck-Sigma (St. Louis,

94

MO). LC-MS grade water was obtained from Scharlab (Barcelona, Spain), formic acid

95

(Optima LC-MS) was acquired from Fisher Scientific (Erembodegem, Belgium), and

96

HPLC grade n-hexane (purity 99.9%) was provided by VWR Chemicals (Radnor, PA).

97

Anhydrous pyridine (purity 99.8%), hexamethyldisilazane (HMDS) (reagent grade, ≥

98

99%) and chlorotrimethylsilane (TMCS) for GC derivatization (purity ≥ 99.0%) were

99

provided by Merck-Sigma (St. Louis, MO).

100

A Trace 1300 GC (Thermo Fisher Scientific, Bremen, Germany) was used for the

101

chromatographic analysis. It was equipped with a TriPlus RSH autosampler (Thermo

102

Fisher Scientific), and the column used was a 30 m x 0.25 mm i.d., 0.25 μm, VF-5ms

103

(Agilent, Santa Clara, CA). As MS detector, a Q-Exactive Orbitrap mass analyzer

104

(Thermo Fisher Scientific) was used.

105 106

Samples collection

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

107

Samples of nine tomato varieties were supplied by a greenhouse farmer from Almería

108

(southeast Spain). All they were grown under the same climatic and agronomic conditions

109

and into the same greenhouse. Three different samples of each var. were selected in order

110

to evaluate potential differences between varieties and within varieties. The tomato types

111

were: one oxheart, var. “Monterosa”; one black tomato, var. “Kumato”; two cherry, (one

112

common cherry, var. “Zoraida”, and another cherry oval, var. “Satyplum”); two saladette,

113

var. “Bernal” (A and B); and three cluster or tomato on the vine (TOV), varieties

114

“Ateneo”, “Guanche” and “Motto Fi”.

115 116

Sample extraction

117

Each sample (≥1 kg) was ground and homogenized. An aliquot of 1 g was weighed

118

and mixed with 10 mL of methanol/water (50:50, v/v). The mixture was shaken for 1 min

119

with a vortex. Afterwards, the sample was centrifuged for 10 min at 5000 rpm (4136 g).

120

The supernatant was filtered using a 0.22 μm Nylon filter vials (Agilent, Santa Clara,

121

CA), and 1 mL was collected for the derivatization step.

122 123

Derivatization

124

One mL of the extract was evaporated under a nitrogen stream, frozen and then,

125

lyophilized for 20 h. Next, 250 µL of pyridine, 40 µL of HMDS and 10 µL of TMCS

126

were added and the mixture was kept at 70 ºC for 30 min. After that, 700 µL of n-hexane

127

were added and homogenized increasing the total volume up to 1 mL, ready to be injected

128

into the GC-Q-Orbitrap system.

129 130

GC-Q-Orbitrap analysis

ACS Paragon Plus Environment

Page 6 of 31

Page 7 of 31

Journal of Agricultural and Food Chemistry

131

One µL of sample was injected at the injector at 250 ºC using splitless mode for 2 min.

132

Helium (with electronically controlled constant flow of 1 mL/min) was used as carrier

133

gas. For the separation of the calystegines, the GC oven was programmed as follows:

134

initially, the temperature was set at 100 ºC and held for 2 min, then, it was increased to

135

240 ºC at 5 ºC/min and finally, it was held at 240 ºC for 10 min, with a total running time

136

of 40 min.

137

The positive electron ionization (EI) source was operated at 70 eV at a temperature of

138

250 ºC, and the transfer line temperature was set at 250 ºC. The full scan-MS acquisition

139

mode was performed at a resolution power of 60000 full width at half maximum (FWHM)

140

in a scan range of m/z 60-600 with 1 µscan. Lock masses were used for column bleed at

141

m/z 73.04680 for C3H9Si+, m/z 133.01356 for C3H9O2Si2+, m/z

142

C5H15O3Si3+, m/z 281.05114 for C7H21O4Si4+ and m/z 355.06990 for C9H27O5Si5+.

207.03235 for

143

The chromatogram was processed using Xcalibur version 4.1, with Quanbrowser and

144

Qualbrowser, and the data was evaluated using TraceFinder 4.1 software (Thermo Fisher

145

Scientific, Les Ulis, France). Statistical analysis (analysis of variance, ANOVA) was

146

carried out with IBM SPSS Statistics v23 (Armonk, NY).

147 148

Method validation

149

A validation protocol was carried out in order to ensure an adequate identification and

150

quantitation of the target compounds. The performance characteristics of the method were

151

established evaluating linearity, trueness, precision and lower limits, following the

152

criteria established in SANTE/11813/2017.29 As many calystegines are natural

153

compounds which occur in several Solanaceae plants, there is not available a blank matrix

154

of tomato for all the target compounds. Therefore, and because the sample used for

155

method validation purposes was not a standard reference material, all the calystegines

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

156

that were not naturally present in this sample (B1, B3, B4 and C1) were evaluated for the

157

validation of the method.

158

Standard calibration solutions prepared in methanol at concentrations that ranged from

159

10 to 1000 µg/L were subjected to the sample pretreatment (evaporation, lyophilization

160

and derivatization) and analyzed. Linearity was studied from the least-squares regression

161

of peak area versus concentration and determination coefficients (R2) were calculated.

162

Intra-day precision, expressed as relative standard deviation (% RSD), was estimated

163

by analyzing three aliquots of tomato sample at three different spiked concentrations: 0.5,

164

1 and 5 mg/kg. Additionally, three aliquots of non-spiked samples were also extracted

165

and repeatability of the method for those calystegines (A3, A5 and B2) naturally present

166

in the sample was calculated. Trueness was determined through the recoveries of

167

calystegines B1, B3, B4 and C1 at three different spiking levels (0.5, 1 and 5 mg/kg).

168

Bearing in mind that no blank matrix was available, LOD and LOQ were established

169

from the solvent calibration curve. LOD was considered as the lowest concentration that

170

provided a mass spectrum with a characteristic ion measured with a mass error lower than

171

5 ppm. LOQ was established as the lowest concentration providing a mass spectrum with

172

a fragment ion having a mass error lower than 5 ppm, at the same retention time as the

173

characteristic ion and with the same chromatographic profile. Additionally, the LOQ

174

should present good linearity, precision and trueness.

175 176

Results and discussion

177

Optimization of GC-Q-Orbitrap conditions

178

A derivatized standard solution of each calystegine was injected into the GC-Q-

179

Orbitrap system. A full-MS was acquired for each calystegine in EI mode in order to

180

select the characteristic ions.

ACS Paragon Plus Environment

Page 8 of 31

Page 9 of 31

Journal of Agricultural and Food Chemistry

181

A predicted GC-MS spectrum was used as reference for each calystegine.30 Some

182

possible characteristic ions were identified and their masses were extracted from the total

183

ion chromatogram (TIC). Calystegines that belong to the same group (A, B or C) are

184

positional isomers, so they present the same molecular formula. It was observed that

185

calystegines within the same group provided the same ions, although slight differences

186

between relative abundances of these ions were observed.

187

Extracting the masses of the possible characteristic ions from the full-MS spectra, the

188

retention time, the theoretical mass and the chemical formula were determined from the

189

experimental mass. Several ions were confirmed for each calystegine as well as some

190

identified as common ions. The selected GC-Q-Orbitrap parameters are presented in

191

Table 1.

192

Figure 2 shows an example of the full-MS spectra including the proposed mechanism

193

for calystegines A3, B4 and C1. As observed, the loss of a methyl group (m/z 15.02293)

194

and trimethylsilanol (OH-TMS m/z 90.04954) are the most common fragmentations. it

195

should be mentioned that none of the molecular ions were detected, [M-CH3]·+ ion being

196

the highest intensity ion detected.

197

The described chromatographic method, based on a previously published work,15 was

198

used and proved that reliable identification and quantitation of the compounds was

199

possible due to goof chromatographic separation of the calystegine isomers studied.

200

Figure 3 shows the obtained TIC using the optimized experimental conditions.

201 202

Optimization of sample pretreatment

203

Sample pretreatment was divided into two phases: sample extraction and

204

derivatization. On the one hand, for the optimization of the sample extraction and

205

considering the highly polarity of the studied compounds, two different extractive options

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

206

were tested. Three aliquots of 10 g of tomato were spiked at 1 mg/kg and extracted using

207

methanol with 1% of formic acid (QuPPe-Method)31 and methanol/water (50:50, v/v),

208

which was frequently employed for their extraction.8,13,21 The QuPPe-Method had been

209

developed for the extraction of highly polar pesticides and because of the sample

210

pretreatment comprises an evaporation step, a non-aqueous solvent was thought to be

211

appropriate and tested by analyzing three aliquots of tomato spiked as described above.

212

However, recoveries ranging from 26-106% were obtained when 1% formic acid in

213

methanol was used (Figure 4A), while methanol/water (50:50, v/v) provided better

214

recoveries (64-118%) and higher sensitivity (Figure 4B). Bearing in mind that a marked

215

matrix effect was observed, the sample amount was reduced from 10 to 1 g. Three aliquots

216

of 1 g of sample spiked at 1 mg/kg were extracted. A diminution of the matrix effect was

217

observed and a clearer TIC were obtained with recoveries similar to those seen when 10

218

g of sample were tested (Figure 4C). Thus, for further experiments, this last extraction

219

procedure based on the use of only 1 g of sample was used.

220

The derivatization step was also submitted to optimization (Figure 4). Different

221

volumes of pyridine (30, 130 or 250 µL), HMDS (40 or 80 µL) and TMCS (10 or 20 µL)

222

were tested and the best results were obtained employing 250 µL pyridine, 40 µL HMDS

223

and 10 µL TMCS (Figure 4D). Although pyridine does not interfere with the reaction, the

224

entire solid residue obtained from the lyophilization step should be covered in order to be

225

completely dissolved and derivatized. Additionally, the use of a final clean-up step was

226

also evaluated, mixing the final extract with water (50:50, v/v), but improvements in the

227

results were not observed and this additional clean-up step was finally discarded.

228 229

Method validation

ACS Paragon Plus Environment

Page 10 of 31

Page 11 of 31

Journal of Agricultural and Food Chemistry

230

The performance characteristics of the optimized method are shown in Table 2.

231

Linearity was evaluated through the obtained determination coefficients (R2) which were

232

always higher than 0.99 for all the compounds, except calystegines A3 and B4 (Table 2).

233

The standard addition methodology was used for quantitation purposes due to a high

234

matrix effect observed (not reported). LOD was established at 0.25 (calystegine A5, B1,

235

B3 and C1) and 0.5 mg/kg (calystegine A3, B2 and B4), whereas LOQ was set at 0.5 mg/kg

236

for all calystegines.

237

As shown in Table 2, adequate intra-day precision (≤ 20.0%) was obtained at all the

238

concentrations studied and for all the compounds, but slightly higher values were

239

obtained for calystegine B3 at 0.5 mg/kg (22.4%) and calystegine B4 at 0.5 mg/kg (21.4%).

240

Recoveries ranged from 73.7 (calystegine B4) to 120.0% (calystegine B3) at 0.5 mg/kg;

241

from 89.5 (calystegine B4) to 118.8% (calystegine B1) at 1 mg/kg and from 95.8

242

(calystegine B3) to 100.7% (calystegine B4) at 5 mg/kg. For calculating recovery rates to

243

those calystegines natively present in the spiked samples, the concentrations found for

244

those compounds in the blank analysis were subtracted.

245

Very few reports determine calystegine in tomato, and only Romera-Torres et al.17

246

include validation parameters; the sensitivity is similar to that presented herein, although

247

slightly higher for some calystegines (LOQ 0.10 mg/kg for calystegine B4, 0.25 mg/kg

248

for calystegine B3 and 0.50 mg/kg for calystegines A3, A5, B1, B2 and C1); similar results

249

were observed for trueness and precision. However, comparing to other studies of

250

calystegines in other matrices, the proposed GC-Q-Orbitrap method is more sensitive and

251

also lower than alternative GC methodologies that provided LOQ from 3-10 mg/L or 2-

252

20 mg/kg,5,7–9,13–15,18,19and than LC methods, with LOQ from 0.4 to 2.5 mg/kg.16,20

253 254

Analysis of samples

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

255

It can be observed (Table 3) that ‘Zoraida’ and ‘Satyplum’ varieties presented the

256

highest concentrations of calystegines A3, A5, B2 and C1, while the concentration of the

257

analytes in ‘Monterosa’, ‘Bernal B’, ‘Ateneo’ and ‘Motto Fi’ varieties were below the

258

LOQ of the proposed analytical method. The concentrations calculated for the

259

calystegines found in the studied samples ranged from 0.65 mg/kg of C1 (‘Bernal A’) to

260

12.47 mg/kg of B2 (‘Zoraida’). Figure 5 shows the chromatograms and full-MS spectra

261

of calystegine A3 and calystegine B2 in two of the studied tomato samples.

262

Previous studies found concentrations in tomato samples of calystegine A3 (0.2-21

263

mg/kg), calystegine A5 (0.9-7 mg/kg) and calystegine B2 (0.4-21 mg/kg).27 These results

264

are in accordance to the results presented herein, although the wide variability in the

265

concentrations of natural compounds must be taken into account, which is highlighted

266

when observing the extensive range of concentrations found for instance in potato,

267

ranging from 0.2 mg/kg of calystegine A318 to 10145 mg/kg of calystegine B2.5

268

Finally, with the aim of checking whether the difference observed between the content

269

of calystegines depends on the var., an ANOVA study was performed. The results

270

obtained for calystegine A5 show that no significance difference was observed between

271

varieties (‘Kumato’, ‘Satyplum’, ‘Zoraida’, ‘Bernal A’ and ‘Guanche’) (p value>10)

272

(Table 3). However, significant differences were observed between the concentrations

273

found for calystegine C1 between varieties that in ‘Zoraida’ was significantly higher than

274

in ‘Kumato’, ‘Satyplum’, ‘Bernal A’ and ‘Guanche’ (p value