A Perspective on the Selective Catalytic Reduction (SCR) of NO with

V2O5/TiO2 catalysts synthesized by a variety of V-precursors (V-oxalate, ammonium metavanadate, grafting of VOCl3, grafting of V-alkoxide and even the...
2 downloads 0 Views 996KB Size
Subscriber access provided by the Henry Madden Library | California State University, Fresno

Perspective

A Perspective on the Selective Catalytic Reduction (SCR) of NO with NH by Supported VO-WO/TiO Catalysts 3

2

5

3

2

Jun-Kun Lai, and Israel E. Wachs ACS Catal., Just Accepted Manuscript • DOI: 10.1021/acscatal.8b01357 • Publication Date (Web): 04 Jun 2018 Downloaded from http://pubs.acs.org on June 4, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

A Perspective on the Selective Catalytic Reduction (SCR) of NO with NH3 by Supported V2O5-WO3/TiO2 Catalysts

Jun-Kun Lai and Israel E. Wachs* Operando Molecular Spectroscopy & Catalysis Laboratory, Department of Chemical and Biomolecular Engineering, Lehigh University Bethlehem, PA 18015, USA *to whom correspondence is to be addressed ([email protected])

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 42

ABSTRACT: The selective catalytic reduction (SCR) NOx with NH3 to harmless N2 and H2O plays a crucial role in reducing highly undesirable NOx acid gas emissions from large utility boilers, industrial boilers, municipal waste plants and incinerators. The supported V2O5‐WO3/TiO2 catalysts have become the most widely used industrial catalysts for these SCR applications since introduction of this technology in the early 1970s. This perspective examines the current fundamental understanding and recent advances of the supported V2O5‐WO3/TiO2 catalyst system: (i) catalyst synthesis, (ii) molecular structures of titania-supported vanadium and tungsten oxide species, (iii) surface acidity, (iv) catalytic active sites, (v) surface reaction intermediates, (vi) reaction mechanism, (vii) rate-determining-step and (viii) reaction kinetics.

KEYWORDS: Catalyst, V2O5, WO3, TiO2, SCR, NO, NH3 1. Introduction Most industrial chemical processes are driven by thermal energy and combustion of fossil fuels accounts for main energy source. The high temperature combustion also form NOx (NO and NO2) pollution from the reaction between O2 and N2 present in air. The EPA established the emission limit of NOx using recommendations from the Ozone Assessment Transport Group (OTAG)1–3 (NOx emission rate of ~0.15 lbs/mmBtu (124 ppm) that represents ~85% reduction from the 1990 emission rate). The current industrial SCR (selective catalytic reduction) of NOx processes can efficiently reduce 80-100% NOx emissions.4Ammonia is the most commonly used reducing agent for the selective catalytic reduction of flue gas NOx to harmless N2 and H2O. The selective catalytic reduction (SCR) of NOx (NO and NO2) with NH3 to harmless N2 and H2O proceeds by the overall reactions, 4NO + 4NH3 + O2 → 4N2 + 6H2O (1) 2NO2 + 4NH3 + O2 → 3N2 + 6H2O

(2)

and has primarily been applied to control NOx emissions from large utility boilers, industrial boilers and municipal solid waste boilers since this technology was initially developed by Hitachi Zosen in Japan at ~1970.5,6More recent applications include diesel engines, such as those found on large ships, diesel locomotives, gas turbines, and even automobiles.7–9 The catalysts employed for boilers are supported V2O5/TiO2, V2O5-WO3/TiO2, V2O5-MoO3/TiO2 and for the more recent applications also consist of zeolite-supported Cu and Fe.4 The zeolite-based catalysts find use at higher temperatures in the more recent applications because of their greater thermal

ACS Paragon Plus Environment

Page 3 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

stability and the titiania-based catalysts are used at medium temperatures because of their high selectivity (as much as ~95-100%) and lower costs. Mn-,Cu-based oxides catalysts have also been reported to efficiently catalyze SCR reactions at low temperatures similarly to V-based oxide catalysts.10–12 This perspective will focus on titania-supported vanadia-tungsta catalysts, especially supported V2O5/TiO2 and V2O5-WO3/TiO2, since these are the most extensively used catalysts for SCR of NOx with NH3. The supported V2O5‐WO3/TiO2 catalysts are widely used in commercial applications because of their excellent thermal stability and lower oxidation activity for the conversion of SO2 to SO3, the latter is strictly regulated because highly reactive SO3 readily converts to H2SO4 in the presence of moisture.13,14 Although the selective catalytic reduction (SCR) of NOx has been successfully applied in industry for almost 50 years, many fundamental details about the nature of the catalytic active sites, surface reaction intermediates, reaction mechanism, rate-determining-step and kinetic model have long been debated in the scientific literature. This perspective summarizes the reported literature for SCR of NOx with NH3 by supported V2O5–WO3/TiO2 catalysts and critically examines the issues being debated.13,15 The objective of this article is to provide a modern perspective on this important environmental catalytic reaction and establish a sound fundamental foundation based on supporting data that will be able to guide the rational design of improved SCR catalysts.16

2.Supported V2O5/TiO2, WO3/TiO2 and V2O5-WO3/TiO2 Catalysts 2.1 Synthesis The catalyst preparation method is a critical factor in determining the interaction between the active components (vanadium and tungsten oxides) and the support (titania). It is, thus, important to carefully compare the characterization findings and SCR performance of catalysts prepared by different synthesis methods. For supported V2O5/TiO2 catalysts prepared by impregnation of a V-precursor on a crystalline TiO2 support, it has been demonstrated that the coordination of the hydrated surface vanadium oxide species are thermodynamically controlled and cannot be controlled by the specific V-precursor or preparation method.17,18 For a series of supported V2O5/TiO2 catalysts synthesized by a variety of V-precursors (V-oxalate, ammonium metavanadate, grafting of VOCl3, grafting of V-alkoxide and even thermal spreading of crystalline V2O5 onto TiO2) all the resulting hydrated surface VOx possess the same surface vanadia species.19–21A similar trend was found for supported WO3/TiO2 catalysts synthesized by impregnated of W-precursors onto crystalline TiO2.22,23 (aqueous solutions of tungstate salts (ammonium metatungstate) or grafting of

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 42

tungsten alkoxides onto crystalline TiO2(anatase) supports).24–26 Information about co-impregenation of V- and W-precursors onto crystalline TiO2 supports has not received as much attention, but it has been demonstrated that the order of V- and W-precursor impregnation doesn’t affect the hydrated VOx and WOx molecular structures of calcined catalysts.22,27 Although supported V2O5-WO3/TiO2 catalysts have not been extensively examined, some publications claim that the nature of the supported vanadium oxide sites depends on the specific precursors and preparation methods,21,23,28–32 but these claims were not backed with supporting information. Supported

V2O5-WO3/TiO2

catalysts

prepared

by

co-precipitation

of

non-crystalline

TiO(OH)2 with ammonium metatungstate and ammonium metavanadate were found to result in new surface VOx and WOx sites on the TiO2 support.17,18,23,28 In addition to the typical surface VOx and WOx sites formed by impregnation of the crystalline TiO2 support, new surface VOx and WOx sites were also present that have been assigned to surface VOx and WOx sites coordinated to defective surface sites on the TiO2 support. Interestingly, both the VOx and WOx components almost exclusively segregated to the surface of the TiO2 support upon calcination that reflects on their mobility in such mixed oxide systems.23,28 The sol-gel33–35 and flame pyrolysis36 synthesis methods have also been examined, but there is no evidence that the resulting structures of the surface VOx and WOx sites on TiO2 are different than formed by conventional impregnation. Given the tendencies of both VOx and WOx to surface segregate and the thermal spreading of crystalline V2O5 into surface VOx sites on TiO2 upon calcination, indicating that surface VOx and WOx on TiO2 are the preferred thermodynamic states, it is highly unlikely that any other synthesis methods can result in any new surface WOx and VOx structures on the TiO2 support. The major difference appears to be between impregnation of V/W-precursors onto crystalline TiO2 and co-precipitation of V- and W-precursors with TiO(OH)2 that result in new surface VOx and WOx sites thought to be associated with surface defects of the TiO2 support. It is important to be aware that impregnation procedures involving poorly soluble precursors (e.g., aqueous ammonium metavanadate or crystalline V2O5-aqueous oxalic acid mixtures) onto crystalline TiO2 can also lead to the formation of crystalline V2O5 and WO3 nanoparticles much below monolayer coverage in addition to the standard surface VOx and WOx sites.17 Another deviating situation can occur when V-precursors are impregnated onto crystalline TiO2(rutile) that can incorporate some V+4 species into its bulk lattice.37,38 Calcination in an oxygen-containing environment, however, tends to prevent V+4 diffusion into the bulk TiO2(rutile) lattice and maintain surface VOx in the V+5 oxidation state.37–40 The final surface area of the supported V2O5-WO3/TiO2 catalyst is dependent on

ACS Paragon Plus Environment

Page 5 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

the specific preparation procedure. Impregnation and calcination with W-precursors before or simultaneously with V-precursors yields the highest surface areas.7,22,41,42 This is related to the thermal stabilizing effect of surface WOx on TiO2 and V2O5/TiO2 catalysts.23,28 Thus, in practice the W-precursor is always introduced before or with the V-precursor to optimize the final surface area of the TiO2 support. In summary, the catalyst synthesis method (titania source, precursor, impregnating solvent, vanadia and tungsta loadings, drying and calcination treatments, etc.) affects the final catalyst structure (titania phase, BET surface area, etc.) and dispersion of the vanadia and tungsta components (surface VOx/WOx species and V2O5/WO3 NPs). Amorphous titania starting materials also result in surface defects that stabilize new surface VOx and WOx sites on the TiO2 support. . 2.2 Structures of Supported V2O5/TiO2 Catalysts Under ambient conditions, the surface vanadia phase is hydrated by a thin aqueous film created by adsorption of moisture from ambient air. Deo et al. demonstrated that under ambient conditions the molecular structures of hydrated surface VOx species are similar to those present in aqueous solutions.18,43–46 The hydrated surface VOx species equilibrate at the pH of the thin aqueous film present on the catalyst, which is determined by the point of zero charge (PZC – net zero charge of the hydrated surface). For TiO2 supports, the PZC is pH~6-7. For low vanadia loading, the PZC is controlled by the TiO2 support and metavanadate oligomers, (VO3)n, are the dominant hydrated vanadates.18 For high vanadia loading, the PZC of the thin aqueous film is controlled by both the TiO2 support and the vanadia phase (pH~0.5), which significantly lowers the net PZC, and vanadate clusters are the dominant hydrated vanadates.18 Under SCR reaction conditions, however, the supported VOx phase on TiO2 is present in a relatively dehydrated state because of the rapid desorption of moisture at elevated temperatures.43,47 Under oxidizing conditions, the supported vanadium oxide phase is present as two-dimensional surface V+5Ox species below monolayer coverage (8 V atoms/nm2) as schematically depicted in Figure 1. Extensive characterization studies with IR,13 Raman,18,22,43,48 X-ray absorption spectroscopy

(XANES/EXAFS),49

solid

state

51

V

NMR50

and

UV-vis44,51

spectroscopy have established the molecular structures of the surface VOx sites on TiO2. These studies revealed that the surface VOx sites possess VO4 coordination with one terminal V=O bond as shown in Figure 1. At low surface coverage (8 V atoms/nm2), crystalline V2O5 nanoparticles are also present and reside on top of the surface vanadia monolayer as indicated in Figure 1c.

Figure 1 Structures of the dehydrated surface vanadia phase on TiO2; (a) isolated mono-oxo VO4, (b) oligomeric mono-oxo VO4, and (c) crystalline V2O5 nanoparticles on top of the surface vanadia monolayer. The nature of the dehydrated supported vanadia phase on the crystalline TiO2 support as a function of surface vanadia coverage is reflected by the in situ Raman spectra of supported V2O5/TiO2 catalysts presented in Figure 2. The Raman band at 1027-1030 cm-1 corresponds to the vibration of the terminal V=O bond and the shift from 1027 to 1030 cm-1 is a consequence of vibrational coupling of adjacent V=O bonds as extent of oligomerization of the surface VOx increases.22,47 The sharp Raman band at 994 cm-1 for the highest vanadia loaded catalyst is characteristic of the V=O vibration of crystalline V2O5 NPs.52–54The broad Raman band at ~920-940 cm-1 arises from the vibrations of the bridging V-O-Ti bonds.55–58 The weak band at ~800 cm-1 present for the lower vanadia loaded catalysts is the overtone vibration of the crystalline TiO2(anatase) phase of the support.22

ACS Paragon Plus Environment

Page 6 of 42

Page 7 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

Figure 2, In situ Raman spectra of dehydrated supported V2O5/TiO2 catalysts under oxidizing conditions: 1% V2O5 (~1 V atoms/nm2), 3% V2O5 (~4 V atoms/nm2), 4.5% V2O5 (~6 V atoms/nm2) and 8% V2O5 (~11 V atoms/nm2). Reproduced from reference 22 with permission. Copyright (1991, American Chemical Society) 2.3 Structures of Supported WO3/TiO2 Catalysts Similar to the supported vanadia phase, the supported tungsten oxide phase under ambient conditions is hydrated and follows the molecular structures of WOx species in aqueous solutions.22,47,59 Under SCR reaction conditions, the supported WOx phase on TiO2 is present in a dehydrated state since moisture readily desorbs from the catalyst surface at elevated temperatures.23,28 Under oxidizing conditions, the supported tungsten oxide phase is present as two-dimensional surface W+6Ox species below monolayer coverage (4.5 W atoms/nm2) as schematically depicted in Figure 3.47,59 Extensive characterization studies with IR,13 Raman,22,47,59 X-ray absorption spectroscopy (XANES/EXAFS)47,60–62 and UV-vis59,63 spectroscopy have established the molecular structure of the dehydrated surface WOx sites. These studies revealed that the surface WOx sites possess WO5/6 coordination and one terminal W=O bond as shown in Figure 3. The lower surface W density at monolayer coverage of the surface WO5/6 sites compared to surface VO4 sites at monolayer coverage is related to the greater number of oxygen atoms surrounding the surface WO5/6 sites than the surface VO4 sites. At low surface coverage ( Al2O3 > SiO2) as a function of specific oxide support indicating that the oxygen from the bridging V-O-Support bond participates in the SCR reaction. Most recent studies have mainly focused on supported V2O5-TiO2 catalysts with high vanadia loading and the effect of vanadia loading and promotion of tungsta on the reaction kinetics has not yet been fully investigated. 7.1 Effect of H2O Significant amounts of moisture, 10~30%, are also present in the flue gas exiting from industrial combustion process.137,138 Moisture interacts with the surface of the catalysts and modifies the surface active sites and the distribution of Lewis and Brønsted acid sites. The role of water in the SCR reaction, however, has not been extensively investigated. Most researchers state that water inhibits the SCR reaction rate at low H2O concentration(~1%), but does not further retard the SCR reaction at higher concentrations (> 5%).13,139 The inhibiting effect of water has been proposed to arise from (1) competitive adsorption with the reactants (NO or NH3)

119,123,139–143

and/or (2) inhibition of reaction between NO and adsorbed ammonia.144–146 Topsøe et al. investigated the effect of H2O (1.7%) during SCR at 390oC by supported

ACS Paragon Plus Environment

Page 21 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

V2O5/TiO2 catalysts with in situ IR spectroscopy and found that water increases the concentration of surface NH4+* species on Brønsted acid sites and only slightly decreases the SCR activity.145 The enhanced concentration of surface NH4+* intermediates may just reflect the conversion of Lewis to Brønsted acid sites in the presence of moisture.39 Importantly, water improves the SCR selectivity by reducing formation of undesirable N2O (from ~16% to ~2% at 390 oC and ~4% to ~1% at 325 o

C) by supported V2O5/TiO2 catalysts.140,145 It was proposed that the suppression of N2O formation occurs because hydroxylated surfaces favor dehydration over dehydrogenation of the surface NHxNO reaction intermediates, but supporting evidence was not given. It has also been claimed that pretreating the catalyst with moisture at 650 oC for 2 hrs enhances the SCR reaction rate by increasing the number of surface Brønsted acid sites, but additional information is required to determine the origin of this interesting effect.147,148 Thus, H2O has a significant effect on both the supported V2O5/TiO2 catalysts and SCR reaction and more detailed studies about the role of water are needed. Studies on the influence of moisture on supported WO3/TiO2 and V2O5-WO3/TiO2 SCR catalysts have not been reported. 7.2 Effect of SO2 Flue gases emissions from power plants always contain SO2 (200~1500 ppmw)137,149 that can be further oxidized to SO3 by the supported V2O5-WO3/TiO2 catalysts. The much higher reactivity of SO3 relative to SO2 has led to its emissions being tightly regulated because SO3 readily reacts with moisture to form H2SO4 (acid rain). In addition, SO3 is corrosive to stainless steel SCR reactor components and readily reacts with ammonia to form ammonium sulfate/bisulfate that deposit on the catalysts causing deactivation and on the walls of heat exchangers to reduce their efficiency. Industrial upper emission limits of sulfur trioxide for SCR processes corresponds to approximately 1-2% sulfur dioxide conversion.14,150,151 SCR catalysts, thus, need to both suppress oxidation of SO2 to SO3 and efficiently promote the SCR reaction to N2. The chemisorption of SO2 and SO3 on TiO2 and supported V2O5/TiO2 has received much attention. In the absence of gas phase molecular O2, SO2 adsorbs on TiO2 as either physisorbed sulfur dioxide (SO2) or chemisorbed sulfite (SO3) surface species, with the ratio depending on the adsorption temperature.14,152 Monolayer surface coverage of SO2 and SO3 species are estimated to correspond to ~4 S atoms/nm2 for isolated species.153,154 In the presence of gas phase molecular O2 and temperatures above 200oC, the surface sulfite (SO3) species transform into the more thermodynamically stable surface sulfate (SO4) species.14,152 Surface sulfates (SO4) form when surface sulfite (SO3) species titrate adjacent sites and form additional

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

bonds to the titania support. The surface sulfates on TiO2 have been demonstrated to be present as mono-oxo surface O=S(-O-Ti)3 species with vibrational spectroscopy under dehydrated conditions.155 Upon exposure to water vapor, the surface SO4 species convert to protonated bidentate surface species,155 which increase the Brønsted acidity by formation of acidic S-OH groups.81,156 For supported V2O5/TiO2 catalysts, the dehydrated surface SO4 species prefer to coordinate to the TiO2 support instead of the surface vanadia species because of repulsive interactions between the surface vanadia and sulfate species.154,157 At half monolayer coverage of surface vanadia species(~4 V atoms/nm2), surface sulfate species are no longer able to form on TiO2 because of the repulsion between the surface sulfate and vanadia species. As for supported V2O5/TiO2 catalysts, the sulfated supported V2O5/TiO2 catalysts with less than a half monolayer of surface vanadia in the presence of moisture were also found to increase the number of surface Brønsted acid sites.147,148,158 It was proposed that surface Brønsted acid sites in the presence of H2O and SO2 at high temperatures (>350oC) increased the SCR reaction rate, but the relative contributions of Brønsted acid sites from the surface VO4 and SO4 sites were not determined.142,157,159 The oxidation of SO2 to SO3 by supported vanadia catalysts has recently been investigated.160 It was found that the turnover frequency (TOF) for SO2 oxidation is independent of surface vanadia coverage indicating that only one surface vanadia site participates in this oxidation reaction.48,98,160,161 The TOF for SO2 oxidation, however, varies by more than an order of magnitude with the specific oxide support (e.g.,TiO2, ZrO2, Al2O3, etc.) and is mainly related to the bridging V-O-Support bond.160,162 This indicates that the oxygen from the bridging V-O-Support bond controls the specific reactivity (TOF). It has been proposed that the active surface vanadia site for the oxidation of SO2 by supported V2O5/TiO2 catalysts consists of dimeric vanadia-sulfate species,103,144,163 but supporting structural information is still lacking. The kinetics of SO2 oxidation by supported V2O5/TiO2 catalysts have been found to follow first-order dependence on SO2, zero-order dependence on O2 and negative first-order dependence on SO3.160,163,164 Additionally, water has been found to decrease the reaction rate by as much as 50%. Although studies of the SO2 oxidation mechanism by supported V2O5/TiO2 catalysts are rare, Ji et al165 proposed that adsorbed SO2 is oxidized to SO3 by the terminal V=O bond and the reduced vanadia site is subsequently oxidized by gas phase molecular O2. This proposed reaction mechanism, however, is not in agreement with the demonstrated strong dependence of the reaction rate on the oxygen from the bridging Ti–O–V bond and lack of dependence of TOF on the terminal V=O bond for the SO2 oxidation TOF.160 Additional studies are needed to fully resolve the SO2 oxidation mechanism by supported V2O5/TiO2 catalysts.

ACS Paragon Plus Environment

Page 22 of 42

Page 23 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

At elevated temperatures, SO2 is oxidized by both the surface vanadia and surface tungsta sites with the surface vanadia sites exhibiting an order of magnitude greater specific activity (TOF) than the surface tungsta sites.96,97,103,105,143,166 The overall SO2 oxidation activity is just the simple sum of SO2 oxidation on individual surface vanadia and tungsta sites, which indicates the absence of any synergistic interactions between these two surface metal oxide sites for SO2 oxidation. The participation of only one surface metal oxide site in the SO2 oxidation reaction is consistent with the independent behavior of the surface vanadia and tungsta sites on TiO2. Both surface vanadia and tungsta sites, however, contribute equally to the overall SO2 oxidation reaction because the ratio of surface W/V is typically ~ 3-4.14 8. Density functional theory (DFT) Density functional theory (DFT) calculations have recently been applied to gain additional fundamental insights into the SCR reaction. The majority of these DFT studies, however, employed Ti-free models as the catalytic surface: V2O9H cluster,167,168 V6O20H10 cluster,169 V4O16H12 cluster,170 V2O9H8 cluster,171 slab model of V8O20 (001),172 and periodic slab of the (010) plane of bulk V2O5173,174 with finite cluster to an infinite surface computational methods.167,168 The DFT model with unsupported gas phase VOx clusters concluded that surface NH4+* species on Brønsted sites are more energetically favored than surface NH3* species on Lewis sites to reduce NO. In contrast, only a few DFT simulations concluded that surface NH3* species on Lewis acid sites are the reactive surface intermediates in the SCR reaction.172,175,176 These DFT studies, however, did not examine the SCR reaction with realistic surface VO4 active sites on TiO2 because of the more challenging undertaking required to model the structure of the amorphous monolayer of surface VO4 species than well-defined vanadia structures present in clusters and crystalline planes of bulk V2O5. DFT calculations with an isolated surface mono-oxo O=VO4H cluster on TiO2(001) have recently been reported for the SCR reaction and suggested involving oxygen from two bridging Ti–O–V oxygen bonds.177 According to this model, one of the bridging oxygens forms a hydroxyl that contributes to the formation of surface NH4+* species on Brønsted acid sites while the second bridging oxygen accepts a proton to stabilize the reduced vanadia active site. The resulting surface NH2* species react with weakly adsorbed NO to form the surface H2NNO* intermediate complex that spontaneously decomposes to N2 and H2O. Additional DFT calculations for more complex titania-supported vanadia sites are still needed to fully understand the fundamentals of the SCR reaction (e.g., influence of oligomeric surface vanadia sites, isolated and oligomeric surface tungsta sites, moisture, sulfur oxides, etc.).

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

9. Perspective of issues requiring resolution In spite of the significant recent progress achieved with regards to the fundamental understanding of SCR of NO with NH3 by supported V2O5-WO3/TiO2 catalysts, there are still issues requiring complete resolution (e.g., isolated vs. oligomeric surface vanadia sites, influence of surface tungsta sites on the surface vanadia sites, surface NH4+* vs. NH3* species, nature of surface reaction intermediate complex, reaction pathways for formation of N2O and effect of moisture, SO2, NO2 and N2O). Additional progress will come from studies with catalysts being characterized under reaction conditions given the dynamics of this catalytic system in different environments (much of the confusion in past studies have arisen from the different reaction conditions being employed in many studies), High Field 51V MAS NMR spectroscopy178 to determine the structures of surface vanadia species will provide new molecular level insights (influence of synthesis, titania support, surface tungsten oxide sites, and reaction environments), fast and modulation spectroscopy that will allow detecting the surface reaction intermediate complex, and more advanced DFT calculation studies. 10. Conclusions This perspective highlights the trends that are well-established as well as issues that still need to be resolved for the SCR of NOx with NH3 by supported V2O5-WO3/TiO2 catalysts. The conclusions reached in this perspective article are: (i) The catalyst synthesis method (titania source, precursor, impregnating solvent, vanadia and tungsta loadings, drying and calcination treatments, etc.) affects the final catalyst structure (titania phase, BET surface area, pore size, porosity, etc.) and dispersion of the vanadia and tungsta components (surface vanadia species, surface tunsgta species, V2O5 NPs and WO3 NPs). Amorphous titania starting materials also introduce surface defects that stabilize new surface vanadia and tungsta sites. (ii) The surface vanadia and tungsta sites on TiO2 form both isolated and oligomeric surface VO4 and WO5/6 species. The same surface vanadia and tungsta species form on TiO2, anatase as well as rutile, independent of the synthesis method since the synthesis method only determines the metal oxide dispersion and presence of surface titania defects. (iii) The total number of surface acid sites is independent of the surface metal oxide coverage with the concentration of surface Brønsted acid sites increasing linearly with surface vanadia and tungsta coverage. The surface vanadia sites mostly exhibit

ACS Paragon Plus Environment

Page 24 of 42

Page 25 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

Brønsted acidity while the surface tungsta sites possess comparable amounts of Brønsted and Lewis acidity. In the presence of moisture at temperatures of 250 oC and higher, the surface Lewis acid sites are converted to surface Brønsted acid sites. (iv) The surface vanadia species, in the V+5 oxidation state, are the catalytic active sites for the SCR reaction; the surface tungsta species are not active for the SCR reaction, but promote the surface vanadia species by their oligomerization and/or crowding, but not by an electronic effect. (v) The most abundant surface intermediate is surface NH4+* species on Brønsted acid sites since surface NH3* species convert to surface NH4+* species in the presence of moisture present under SCR reaction conditions. Surface NHxNO reaction intermediates have not been detected with IR either due to their low concentrations or rapid decomposition to N2 and H2O during SCR reaction conditions. (vi) The SCR of NO with NH3 proceeds via a surface Mars-van-Krevelen mechanism involving oxygen from the surface vanadia sites with the surface region of the TiO2 support also supplying oxygen to the surface vanadia sites. The reaction mechanism involves the participation of weakly adsorbed NO with surface NHx species. (vii) The rate-determining-step involves breaking of an N−H bond during the course of formation or decomposition of the surface NO−NHx reaction intermediate. (viii) Although empirically the SCR reaction is first-order in NO and zero-order in both ammonia and molecular O2, a kinetic expression based on the elementary steps of the reaction mechanism, surface reaction intermediate complex and rate-determining-step is still lacking. Kinetic studies investigating the influence of surface vanadia and tungsta coverage are still absent from the literature.

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Acknowledgements This work was supported as part of UNCAGE-ME, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012577.

ACS Paragon Plus Environment

Page 26 of 42

Page 27 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

References (1) Bolinsky, F. T.; Dennis, D. S.; Huston, J. S. Permitting and solid waste management issues for the bailly station wet limestone AFGD system; USDOE: (2)

Washington, DC, 1991; p 1-18. Schultz, K. Acid rain control provisions of the 1990 clean air act amendments:

(3)

A utility perspective. St. B. Tex. Envtl. L. J. 1991, 21, 127–133. Mostaghel, D. M. State reactions to the trading of emissions allowances under

(4)

title IV of the clean air act amendments of 1990. Envtl. Aff. L. Rev. 1995, 22, 201- 224. Babcock & Wilcox. Steam: its generation and use, 42nd ed.; Tomei G. L., Eds.;

(5)

(6)

Babcock & Wilcox company: Charlotte, 2015; p 1-338. Rosenberg, H. S.; Curran, L. M.; Slack, A. V.; Ando, J.; Oxley, J. H. Post combustion methods for control of NOx emissions. Prog. Energy Combust. Sci. 1980, 6 , 287–302. Nova, I.; Beretta, A.; Groppi, G.; Lietti, L.; Tronconi, E.; Forzatti, P. Structured catalysts and reactors: monolithic catalysts for nox removal from stationary sources, 2nd ed.; Cybulski, A., Moulijn, J. A., Eds.; CRC Press:

(7)

Boca Raton, 2005; p 171-214 Marberger, A.; Elsener, M.; Ferri, D.; Kröcher, O. VOx surface coverage optimization of V2O5/WO3-TiO2 SCR catalysts by variation of the V loading

(8)

and by aging. Catalysts 2015, 5, 1704–1720. Jung, Y.; Shin, Y. J.; Pyo, Y. D.; Cho, C. P.; Jang, J.; Kim, G. NOx and N2O emissions over a Urea-SCR system containing both V2O5-WO3/TiO2 and

(9)

Cu-zeolite catalysts in a diesel engine. Chem. Eng. J. 2017, 326, 853–862. Goldbach, M.; Roppertz, A.; Langenfeld, P.; Wackerhagen, M.; Füger, S.; Kureti, S. Urea decomposition in selective catalytic reduction on V2O5/WO3/TiO2 catalyst in diesel exhaust. Chem. Eng. Technol. 2017, 40, 2035–2043.

(10)

(11)

Boningari, T.; Smirniotis, P. G. Impact of nitrogen oxides on the environment and human health: Mn-based materials for the NOx abatement. Curr. Opin. Chem. Eng. 2016, 13, 133–141. Boningari, T.; Koirala, R.; Smirniotis, P. G. Low-temperature catalytic reduction of NO by NH3 over vanadia-based nanoparticles prepared by flame-assisted spray pyrolysis : Influence of various supports. Appl. Catal. B:

(12)

Environ. 2013, 140–141, 289–298. Smirniotis, P. G.; Pena, D. A.; Uphade, B. S. Low-temperature selective catalytic reduction of NO with NH3 over iron and manganese oxides supported on titania. Angew. Chemie - Int. Ed. 2001, 40, 2479–2482.

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(13)

(14)

Busca, G.; Lietti, L.; Ramis, G.; Berti, F. Chemical and mechanistic aspects of the selective catalytic reduction of NOx by ammonia over oxide catalysts: A review. Appl. Catal. B: Environ. 1998, 18, 1–36. Dunn, J. P.; Stenger, H. G.; Wachs, I. E. Oxidation of sulfur dioxide over supported vanadia catalysts: molecular structure – reactivity relationships and

(15)

reaction kinetics. Catal. Today 1999, 51, 301–318. Guerrero-Pérez, M. O. Supported, bulk and bulk-supported vanadium oxide

(16)

catalysts: A short review with an historical perspective. Catal. Today 2017, 285, 226–233. Heck, R.M.; Farrauto, R. J.; Gulati, S. T. Catalytic air pollution control:

(17)

commercial technology, 3rd ed.; John Wiley & Sons: New York, 2009; p 1-522. Carrero, C. A.; Keturakis, C. J.; Orrego, A.; Schomäcker, R.; Wachs, I. E. Anomalous reactivity of supported V2O5 nanoparticles for propane oxidative

(18)

dehydrogenation: influence of the vanadium oxide precursor. Dalt. Trans. 2013, 42, 12644-12653. Wachs, I. E. Catalysis science of supported vanadium oxide catalysts. Dalt.

(19)

Trans. 2013, 42, 11762–11769. Machej, T.; Haber, J. Monolayer V2O5/TiO2 and MoO3/TiO2 catalysts prepared

(20)

(21)

(22)

by different methods. Appl. Catal. 1991, 70, 115–128. Deo, G.; Turek, A. M.; Wachs, I. E.; Machej, T.; Haber, J.; Das, N.; Eckert, H.; Hirt, A. M. Physical and chemical characterization of surface vanadium oxide supported on titania : influence of the titania phase ( anatase , rutile , brookite and B ). Appl. Catal. A: Gen. 1992, 91, 27–42. Li, J.; Peng, Y.; Chang, H.; Li, X.; Crittenden, J. C.; Hao, J. Chemical poisoning and regeneration of SCR catalysts for NOx removal from stationary sources. Front. Environ. Sci. Eng. 2016, 10, 413–427. Vuurman, M. A.; Wachs, I. E.; Hirt, A. M. Structural determination of supported V2O5-WO3/TiO2 catalysts by in situ Raman spectroscopy and X-ray

(23)

photoelectron spectroscopy. J. Phys. Chem. 1991, 95, 9928–9937. He, Y.; Ford, M. E.; Zhu, M.; Liu, Q.; Wu, Z.; Wachs, I. E. Selective catalytic reduction of NO by NH3 with WO3-TiO2 catalysts: Influence of catalyst

(24)

synthesis method. Appl. Catal. B: Environ. 2016, 188, 122–133. Wachs, I. E.; Kim, T.; Ross, E. I. Catalysis science of the solid acidity of model

(25)

supported tungsten oxide catalysts. Catal. Today. 2006, 116, 162–168. Scholz, A.; Schnyder, B.; Wokaun, A. Influence of calcination treatment on the structure of grafted WO(x) species on titania. J. Mol. Catal. A: Chem. 1999, 138, 249–261.

ACS Paragon Plus Environment

Page 28 of 42

Page 29 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

(26)

Djerad, S.; Tifouti, L.; Crocoll, M.; Weisweiler, W. Effect of vanadia and tungsten loadings on the physical and chemical characteristics of

(27)

V2O5-WO3/TiO2 catalysts. J. Mol. Catal. A: Chem. 2004, 208, 257–265. Hardcastle, F. D.; Wachs, I. E. Determination of niobium oxygen bond

(28)

distances and bond orders by Raman-spectroscopy. J. Phys. Chem. 1991, 45, 201–213. He, Y.; Ford, M. E.; Zhu, M.; Liu, Q.; Tumuluri, U.; Wu, Z.; Wachs, I. E. Influence of catalyst synthesis method on selective catalytic reduction (SCR) of NO by NH3 with V2O5-WO3/TiO2 catalysts. Appl. Catal. B: Environ. 2016, 193, 141–150.

(29)

(30)

(31)

Kwon, D. W.; Park, K. H.; Hong, S. C. The influence on SCR activity of the atomic structure of V2O5/TiO2 catalysts prepared by a mechanochemical method. Appl. Catal. A: Gen. 2013, 451, 227–235. Segura, Y.; Cool, P.; Kustrowski, P.; Chmielarz, L.; Dziembaj, R.; Vansant, E. F. Characterization of vanadium and titanium oxide supported SBA-15. J. Phys. Chem. B 2005, 109, 12071–12079. Segura, Y.; Cool, P.; Voort, P.Van Der; Mees, F.; Meynen, V.; Vansant, E. F. TiOx - VOx mixed oxides on SBA-15 support prepared by the designed dispersion of acetylacetonate complexes: Spectroscopic study of the reaction

(32)

mechanisms. Appl. Catal. B: Environ. 2004, 108, 3794–3800. Segura, Y.; Chmielarz, L.; Kustrowski, P.; Cool, P.; Dziembaj, R.; Vansant, E. F. Characterisation and reactivity of vanadia – titania supported SBA-15 in the

(33)

SCR of NO with ammonia. J. Phys. Chem. B 2005, 61, 69–78. Zhang, H.; Han, J.; Niu, X.; Han, X.; Wei, G.; Han, W. Study of synthesis and catalytic property of WO3/TiO2 catalysts for NO reduction at high temperatures.

(34)

J. Mol. Catal. A: Chem. 2011, 350, 35–39. Baraket, L.; Ghorbel, A.; Grange, P. Selective catalytic reduction of NO by ammonia on V2O5-SO42-/TiO2 catalysts prepared by the sol-gel method. Appl.

(35)

Catal. B: Environ. 2007, 72, 37–43. Reiche, M. A.; Ortelli, E.; Baiker, A. Vanadia grafted on TiO2–SiO2, TiO2 and SiO2 aerogels structural properties and catalytic behaviour in selective

(36)

reduction of NO by NH3. Appl. Catal. B: Environ. 1999, 23, 187–203. Akurati, K. K.; Vital, A.; Dellemann, J. P.; Michalow, K.; Graule, T.; Ferri, D.; Baiker, A. Flame-made WO3/TiO2 nanoparticles: Relation between surface acidity, structure and photocatalytic activity. Appl. Catal. B: Environ. 2008, 79, 53–62.

(37)

Saleh, R. Y.; Wachs, I. E.; Chan, S. S.; Chersich, C. C. The interaction of V2O5 with TiO2(anatase): Catalyst evolution with calcination temperature and

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(38)

O-xylene oxidation. J. Catal. 1986, 98, 102–114. Wachs, I. E.; Hardcastle, F. D.; Chan, S. S. Characterization of supported metal oxides by laser Raman spectroscopy: Supported vanadium oxide on alumina

(39)

and titania. Mater. Res. Soc. Symp. Proc. 1988, 111, 353–358. Zhu, M.; Lai, J.-K.; Tumuluri, U.; Wu, Z.; Wachs, I. E. Nature of active sites and surface intermediates during SCR of NO with NH3 by supported

(40)

V2O5 –WO3/TiO2 catalysts. J. Am. Chem. Soc. 2017, 139, 15624–15627. Zhu, M.; Lai, J.-K.; Tumuluri, U.; Ford, M. E.; Wu, Z.; Wachs, I. E. Reaction pathways and kinetics for selective catalytic reduction (SCR) of acidic NOx

(41)

emissions from power plants with NH3. ACS Catal. 2017, 7, 8358–8361. Qi, C.; Bao, W.; Wang, L.; Li, H.; Wu, W. Study of the V2O5-WO3/TiO2 catalyst synthesized from waste catalyst on selective catalytic reduction of NOx

(42)

by NH3. Catalysts 2017, 7, 110. Yu, W.; Wu, X.; Si, Z.; Weng, D. Influences of impregnation procedure on the SCR activity and alkali resistance of V2O5-WO3/TiO2 catalyst. Appl. Surf. Sci.

(43)

2013, 283, 209–214. Wachs, I.; Deo, G.; Weckhuysen, B.; Andreini, A.; Vuurman, M.; deBoer, M.; Amiridis, M. Selective catalytic reduction of NO with NH3 over supported

(44)

(45)

(46) (47)

vanadia catalysts. J. Catal. 1996, 221, 211–221. Tian, H.; Ross, E. I.; Wachs, I. E. Quantitative determination of the speciation of surface vanadium oxides and their catalytic activity. J. Phys. Chem. B 2006, 110, 9593–9600. Lingaiah, N.; Reddy, K. M.; Nagaraju, P.; Prasad, P. S. S.; Wachs, I. E. Influence of vanadium location in titania supported vanadomolybdophosphoric acid catalysts and its effect on the oxidation and ammoxidation functionalities. J. Phys. Chem. C 2008, 112, 8294–8300. Wachs, I. E.; Routray, K. Catalysis science of bulk mixed oxides. ACS Catal. 2012, 2, 1235–1246. Kim, D. S.; Ostromecki, M.; Wachs, I. E. Surface structures of supported tungsten oxide catalysts under dehydrated conditions. J. Mol. Catal. A: Chem.

(48)

1996, 106, 93–102. Deo, G.; Wachs, I. E. Reactivity of supported vanadium oxide catalysts: The

(49)

partial oxidation of methanol. J. Catal. 1994, 146, 323–334. Tanaka, T.; Yamashita, H.; Tsuchitani, R.; Funabiki, T.; Yoshida, S. X-ray absorption (EXAFS/XANES) study of supported vanadium oxide catalysts. J.

(50)

Chem. Soc., Faraday Trans. 1 1988, 84, 2987–2999. Eckert, H.; Wachs, I. E. Solid-state Vanadium-51 NMR structural studies on supported vanadium(V) oxide catalysts: vanadium oxide surface layers on

ACS Paragon Plus Environment

Page 30 of 42

Page 31 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

(51)

alumina and titania supports. J. Phys. Chem. 1989, 93, 6796–6805. Tian, H.; Wachs, I. E.; Briand, L. E. Comparison of UV and visible Raman spectroscopy of bulk metal molybdate and metal vanadate catalysts. J. Phys.

Chem. B 2005, 109, 23491–23499. (52) Beck, B.; Harth, M.; Hamilton, N. G.; Carrero, C.; Uhlrich, J. J.; Trunschke, A.; Shaikhutdinov, S.; Schubert, H.; Freund, H. J.; Schlögl, R.; Sauer, J.; Schomäcker, R. Partial oxidation of ethanol on vanadia catalysts on supporting oxides with different redox properties compared to propane. J. Catal. 2012, 296, 120–131. (53)

Freund, H. J. Model studies in heterogeneous catalysis. Chem. - A Eur. J. 2010, 16, 9384–9397.

(54) Magg, N.; Immaraporn, B.; Giorgi, J. B.; Schroeder, T.; Baumer, M.; Dobler, J.; Wu, Z.; Kondratenko, E.; Cherian, M.; Baerns, M.; Stairc P. C.; Sauer, J.; Freund, H. J. Vibrational spectra of alumina- and silica-supported vanadia

(55)

revisited: An experimental and theoretical model catalyst study. J. Catal. 2004, 226, 88–100. Brázdová, V.; Ganduglia-Pirovano, M. V.; Sauer, J. Vanadium oxides on aluminum oxide supports. 2. Structure, vibrational properties, and reducibility

(56) (57)

of V2O5 clusters on α-Al2O3(0001). J. Phys. Chem. B 2005, 109, 23532–23542. Vyboishchikov, S. F.; Sauer, J. (V2O5)n gas-phase clusters (n=1-12) compared to V2O5 crystal : DFT calculations. J. Phys. Chem. A 2001, 105, 8588–8598. Lietti, L.; Nova, I.; Ramis, G.; Acqua, L. D.; Busca, G.; Giamello, E.; Forzatti, P.; Bregani, F. Characterization and reactivity of V2O5 – MoO3/TiO2 De-NOx

SCR catalysts. J. Catal. 1999, 187, 419–435. (58) Guimond, S.; Abu Haija, M.; Kaya, S.; Lu, J.; Weissenrieder, J.; Shaikhutdinov, S.; Kuhlenbeck, H.; Freund, H. J.; Döbler, J.; Sauer, J. Vanadium oxide

(59)

surfaces and supported vanadium oxide nanoparticles. Top. Catal. 2006, 38, 117–125. Kim, T.; Burrows, A.; Kiely, C. J.; Wachs, I. E. Molecular/electronic structure-surface acidity relationships of model-supported tungsten oxide

(60)

catalysts. J. Catal. 2007, 246, 370–381. Barton, D. G.; Soled, S. L.; Meitzner, G. D.; Fuentes, G. A.; Iglesia, E. Structural and catalytic characterization of solid acids based on zirconia

(61)

modified by tungsten oxide. J. Catal. 1999, 181, 57–72. Horsley, J. A.; Wachs, I. E.; Brown, J. M.; Via, G. H.; Hardcastle, F. D. Structure of surface tungsten oxide species in the tungsten trioxide/alumina supported oxide system from x-ray absorption near-edge spectroscopy and Raman spectroscopy. J. Phys. Chem. 1987, 91, 4014–4020.

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(62)

(63)

(64)

Hilbrig, F.; Goebel, H. E.; Knoezinger, H.; Schmelz, H.; Lengeler, B. X-ray absorption spectroscopy study of the titania- and alumina-supported tungsten oxide system. J. Phys. Chem. 1991, 95, 6973–6978. Ross-Medgaarden, E. I.; Wachs, I. E. Structural determination of bulk and surface tungsten oxides with UV-vis diffuse reflectance spectroscopy and Raman spectroscopy. J. Phys. Chem. C 2007, 111, 15089–15099. Lin, H.; Long, J.; Gu, Q.; Zhang, W.; Ruan, R.; Li, Z.; Wang, X. In situ IR study of surface hydroxyl species of dehydrated TiO2: Towards understanding pivotal surface processes of TiO2 photocatalytic oxidation of toluene. Phys. Chem. Chem. Phys. 2012, 14, 9468–9474.

(65)

Mathieu, M.V.; Primet, M.; Pichat, P. Infrared study of the surface of titanium

(66)

dioxides. II. Acidic and basic properties. J. Phys. Chem. 1971, 75, 1221–1226. Finnie, K. S.; Cassidy, D. J.; Bartlett, J. R.; Woolfrey, J. L. IR spectroscopy of surface water and hydroxyl species on nanocrystalline TiO2 films. Langmuir

(67)

2001, 17, 816–820. Topsøe, N.-Y.; Topsøe, H.; Dumesic, J. A. Vanadia/titania catalysts for

(68)

selective catalytic reduction (SCR) of nitric oxide by ammonia. J. Catal. 1995, 151, 241–252. Topsøe, N.-Y.; Topsøe, H.; Dumesic, J. A. Vanadia/titania catalysts for

(69)

(70)

(71)

selective catalytic reduction (SCR) of nitric oxide by ammonia. J. Catal. 1995, 151, 226–240. Lewandowska, A. E.; Calatayud, M.; Tielens, F.; Bañares, M. A. Dynamics of hydration in vanadia-titania catalysts at low loading: A theoretical and experimental study. J. Phys. Chem. C 2011, 115, 24133–24142. Lietti, L.; Alemany, J. L.; Forzatti, P.; Busca, G.; Ramis, G.; Giamello, E.; Bregani, F. Reactivity of V2O5-WO3/TiO2 catalysts in the selective catalytic reduction of nitric oxide by ammonia. Catal. Today 1996, 29, 143–148. Ramis, G.; Busca, G.; Lorenzelli, V.; Forzatti, P. Fourier transform-infrared study of the adsorption and coadsorption of nitric oxide, nitrogen dioxide and ammonia on and mechanism of selective catalytic reduction. Appl. Catal. 1990, 64, 243–257.

(72)

(73)

Went, G. T.; Leu, L. J.; Lombardo, S. J.; Bell, A. T. Raman spectroscopy and thermal desorption of NH3 adsorbed on TiO2 (anatase)-supported V2O5. J. Phys. Chem. 1992, 96, 2235–2241. Went, G. T.; Leu, L. J.; Rosin, R. R.; Bell, A. T. The effects of structure on the catalytic activity and selectivity of V2O5/TiO2 for the reduction of NO by NH3.

(74)

J. Catal. 1992, 134, 492–505. Belokopytov, V.; Kholyavenko, K. M.; Gerei, S.V. An infrared study of the

ACS Paragon Plus Environment

Page 32 of 42

Page 33 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

(75) (76)

(77) (78)

surface properties of metal oxide. J. Catal. 1979, 7, 1–7. Topsøe, N. Y. Characterization of the nature of surface sites on vanadia-titania catalysts by FTIR. J. Catal. 1991, 128, 499–511. Ramis, G.; Yi, L.; Busca, G. Ammonia activation over catalysts for the selective catalytic reduction of NO, and the selective catalytic oxidation of NH3. An FT-IR study. Catal. Today 1996, 28, 373–380. Willey, R. J.; Wang, C. T.; Peri, J. B. Vanadium-titanium oxide aerogel catalysts. J. Non. Cryst. Solids 1995, 186, 408–414. Lietti, L.; Forzatti, P.; Ramis, G.; Busca, G.; Bregani, F. Potassium doping of vanadia/titania de-NOxing catalysts: Surface characterisation and reactivity

(79)

study. Appl. Catal. B: Environ. 1993, 3, 13–35. Ramis, G.; Busca, G.; Bregani, F. On the effect of dopants and additives on the

(80)

state of surface vanadyl centers of vanadia-titania catalysts. Catal. Letters 1993, 18, 299–303. Went, G. T.; Leu, L. jen; Bell, A. T. Quantitative structural analysis of

(81)

(82)

dispersed vanadia species in TiO2(anatase)-supported V2O5. J. Catal. 1992, 134, 479–491. Busca, G.; Saussey, H.; Saur, O.; Lavalley, J. C.; Lorenzelli, V. FT-IR characterization of the surface acidity of different titanium dioxide anatase preparations. Appl. Catal. 1985, 14, 245–260. Ramis, G.; Busca, G.; Lorenzelli, V.; Forzatti, P. Fourier transform-infrared study of the adsorption and coadsorption of nitric oxide , nitrogen dioxide and

(83)

ammonia on and mechanism of selective catalytic reduction. Appl. Catal. 1990, 64, 243–257. Hu, S. L.; Apple, T. M. 15N NMR study of the adsorption of NO and NH3 on

(84)

titania-supported vanadia catalysts. J. Catal. 1996, 158, 199–204. Lietti, L. Reactivity of V2O5-WO3/TiO2 de-NO(x) catalysts by transient

(85)

(86) (87)

methods. Appl. Catal. B: Environ. 1996, 10, 281–297. Srnak, T. Z.; Dumesic, J. A; Clausen, B. S.; Tornqvist, E.; Topsoe, N. Y. Temperature-programmed desorption/reaction and in situ spectroscopic studies of vanadia/titania for catalytic reduction of nitric oxide. J. Catal. 1992, 135, 246–262. Lietti, L.; Forzatti, P. Temperature programmed desorption/reaction of ammonia over V2O5/TiO2 De-NOxing catalysts. J. Catal. 1994, 147, 241–249. Rasmussen, S. B.; Portela, R.; Bazin, P.; Ávila, P.; Bañares, M. A.; Daturi, M. Transient operando study on the NH3/NH4+ interplay in V-SCR monolithic catalysts. Appl. Catal. B: Environ. 2018, 224, 109–115.

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(88)

(89)

(90)

Resini, C.; Montanari, T.; Busca, G.; Jehng, J. M.; Wachs, I. E. Comparison of alcohol and alkane oxidative dehydrogenation reactions over supported vanadium oxide catalysts: in situ Infrared, Raman and UV-vis spectroscopic studies of surface alkoxide intermediates and of their surface chemistry. Catal. Today 2005, 99, 105–114. Marberger, A.; Ferri, D.; Elsener, M.; Krçcher, O. The significance of lewis acid sites for the selective catalytic reduction of nitric oxide on vanadium-based catalysts. Angew. Chemie - Int. Ed. 2016, 55, 11989–11994. Nakamoto, K. Infrared and Raman spectra of inorganic and coordination

compounds, 4th ed.; Wiley: New York, 1986; p 309. (91) Odriozola, J. A.; Soria, J.; Somorjai, G. A.; Heinemann, H.; Garcia de la Banda, J. F.; Lopez Granados, M.; Conesa, J. C. Adsorption of nitric oxide and ammonia on vanadia-titania catalysts: ESR and XPS studies of adsorption. J. (92)

Phys. Chem. 1991, 95, 240–246. Odriozola, J. A.; Heinemann, H.; Somorjai, G. A.; dela Banda, J. F. G.; Pereira, P. AES and TDS study of the adsorption of NH3 and NO on V2O5 and TiO2

(93)

surfaces: Mechanistic implications. J. Catal. 1989, 119, 71–82. Hadjiivanov, K.; Concepcion, P. Analysis of oxidation states of vanadium in

(94)

vanadia – titania catalysts by the IR spectra of adsorbed NO. Top. Catal. 2000, 12, 123–130. Centeno, M. A.; Carrizosa, I.; Odriozola, J. A. NO-NH3 coadsorption on vanadia/titania catalysts: Determination of the reduction degree of vanadium.

(95)

Appl. Catal. B: Environ. 2001, 29, 307–314. Ettireddy, P. R.; Ettireddy, N.; Mamedov, S.; Boolchand, P.; Smirniotis, P. G. Surface characterization studies of TiO2 supported manganese oxide catalysts for low temperature SCR of NO with NH3. Appl. Catal. B: Environ. 2007, 76, 123–134.

(96)

Alemany, L.; Lietti, L.; Ferlazzo, N.; Forzatti, P.; Busca, G.; Giamello, E.; Bregani, F. Reactivity and Physicochemical Characterization of

(97)

V2O5-WO3/TiO2 De-NOx Catalysts. J. Catal. 1995, 155, 117–130. Ramis, G.; Busca, G.; Cristiani, C.; Lietti, L.; Forzatti, P.; Bregani, F.

(98)

Characterization of tungsta–titania catalysts. Langmuir 1992, 8, 1744–1749. Dunn, J. P.; Stenger, H. G.;Wachs, I.E. Oxidation of SO2 over supported metal

(99)

oxide catalysts. J. Catal. 1999, 181, 233–243. Wachs, I. E.; Briand, L. E.; Jehng, J. M.; Burcham, L.; Gao, X. Molecular

structure and reactivity of the group V metal oxides. Catal. Today 2000, 57, 323–330. (100) Due-Hansen, J.; Rasmussen, S. B.; Mikolajska, E.; Bañares, M. A.; Ávila, P.;

ACS Paragon Plus Environment

Page 34 of 42

Page 35 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

Fehrmann, R. Redox behaviour of vanadium during hydrogen-oxygen exposure of the V2O5-WO3/TiO2 SCR catalyst at 250°C. Appl. Catal. B: Environ. 2011, 107, 340–346. (101) Catana, G.; Rao, R. R.; Weckhuysen, B. M.; Van DerVoort, P.; Vansant, E.; Schoonheydt, R. A. Supported vanadium oxide catalysts: Quantitative spectroscopy, preferential adsorption of V4+/5+, and Al2O3 coating of Zeolite Y. J. Phys. Chem. B 1998, 102, 8005–8012. (102) Inomata, M.; Miyamoto, A.; Murakami, Y. Mechanism of the reaction of NO and NH3 on vanadium oxide catalyst in the presence of oxygen under the dilute gas condition. J. Catal. 1980, 62, 140–148. (103) Orsenigo, C.; Lietti, L.; Tronconi, E.; Forzatti, P.; Bregani, F. Dynamic investigation of the role of the surface sulfates in NOx reduction and SO2 oxidation over V2O5/WO3/TiO2 catalysts. Ind. Eng. Chem. Res. 1998, 37, 2350–2359. (104) Marshneva, V. I.; Slavinskaya, E. M.; Kalinkina, O. V.; Odegova, G. V.; Moroz, E. M.; Lavrova, G. V.; Salanov, A. N. The influence of support on the activity of monolayer vanadia-titania catalysts for selective catalytic reduction of NO with ammonia. J. Catal. 1995, 155, 171–183. (105) Lietti, L.; Forzatti, P.; Bregani, F. Steady-state and transient reactivity study of TiO2-supported V2O5−WO3 De-NOx catalysts:  Relevance of the vanadium−tungsten interaction on the catalytic activity. Ind. Eng. Chem. Res. 1996, 35, 3884–3892. (106) Baiker, A.; Dollenmeier, P.; Glinski, M. Selective catalytic reduction of nitric oxide with ammonia. Appl. Catal. 1987, 35, 351–364. (107) Burcham, L. J.; Deo, G.; Gao, X.; Wachs, I. E. In situ IR , Raman , and UV-Vis DRS spectroscopy of supported vanadium oxide catalysts during methanol oxidation. Top. Catal. 2000, 11–12, 85–100. (108) Duffy, B. L.; Curry-Hyde, H. E.; Cant, N. W.; Nelson, P. F. Isotopic labeling studies of the effects of temperature, water, and vanadia loading on the selective catalytic reduction of NO with NH3 over vanadia-titania catalysts. J. Phys. Chem. 1994, 98, 7153–7161. (109) Janssen, F. J. J. G.; Kerkhof, F. M. G.Van Den; Bosch, H.; Ross, J. R. H. Mechanism of the reaction of nitric oxide, ammonia, and oxygen over vanadia catalysts. 2. Isotopic transient studies with oxygen-18 and nitrogen-15. J. Phys. Chem. 1987, 91, 6633–6638. (110) Kumthekar, M. W.; Ozkan, U. S. Use of isotopic transient techniques in the study of NO reduction reactions. Appl. Catal. A: Gen. 1997, 151, 289–303. (111) Otto, K.; Shelef, M.; Kummer, J. T. Studies of surface reactions of nitric oxide

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

by nitrogen-15 isotope labeling. I. the reaction between nitric Oxide and ammonia over supported platinum at 200-250oC. J. Phys. Chem. 1970, 74, 2690–2698. (112) Janssen, F. J. J. G.; Van DenKerkhof, F. M. G.; Bosch, H.; Ross, J. R. H. Mechanism of the reaction of nitric oxide, ammonia, and oxygen over vanadia catalysts. 1. The role of oxygen studied by way of isotopic transients under dilute conditions. J. Phys. Chem. 1987, 91, 5921–5927. (113) Ozkan, U. S.; Cai, Y. P.; Kumthehar, M. W. Mechanistic studies of selective catalytic reduction of nitric-oxide with ammonia over V2O5/TiO2 (Anatase) catalysts through transient isotopic labeling at steady-state. J. Phys. Chem. 1995, 99, 2363–2371. (114) Ozkan, U. S.; Cai, Y. P.; Kumthekar, M. W. Investigation of the mechanism of ammonia oxidation and oxygen exchange over vanadia catalysts using N-15 and O-18 tracer studies. J. Catal. 1994, 149, 375–389. (115) Ozkan, U. S.; Cai, Y.; Kumthekar, M. W. Investigation of the reaction pathways in selective catalytic reduction of NO with NH3 over V2O5 catalysts: isotopic labeling studies using 18O2, 15NH3, 15NO, and 15N18O. J. Catal. 1994, 149, 390–403. (116) Wong, W. C.; Nobe, K. Kinetics of NO reduction with NH3 on “ Chemical Mixed ” and impregnated V2O5-TiO2 Catalysts. Ind. Eng. Chem. Prod. Res. Dev. 1984, 23, 564–568. (117) Marangozis, J. Comparison and analysis of intrinsic kinetics and effectiveness factors of the catalytic reduction of NO with ammonia in the presence of oxygen. Ind. Eng. Chem. Res. 1992, 31, 987–994. (118) Odenbrand, I.; Lundin, S. T.; Anderson, L. Catalytic reduction of nitrogen oxides - 1. The reduction of NO. Appl. Catal. 1985, 18, 335–352. (119) Lintz, H. G.; Turek, T. Intrinsic kinetics of nitric oxide reduction by ammonia on a vanadia-titania catalyst. Appl. Catal. A: Gen. 1992, 85, 13–25. (120) Willey, R. J.; Lai, H.; Peri, J. B. Investigation of iron oxide-chromia-alumina aerogels for the selective catalytic reduction of nitric oxide by ammonia. J. Catal. 1991, 130, 319–331. (121) Calis, H. P.; Gerritsen, A. W. The selective catalytic reduction of nitric oxide. Chem. Eng. 1996, 51, 1789–1798. (122) Willey, R. J.; Eldridge, J. W.; Kittrell, J. R. Mechanistic model of the selective catalytic reduction of nitric oxide with ammonia. Ind. Eng. Chem. Prod. Res. Dev. 1985, 24, 226–233. (123) Dumesic, J. A.; Topsøe, N.-Y.; Topsøe, H.; Chen, Y.; Slabiak, T. Kinetics of selective catalytic reduction of nitric oxide by ammonia over vanadia/titania. J.

ACS Paragon Plus Environment

Page 36 of 42

Page 37 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

Catal. 1996, 163, 409–417. (124) Dumesic, J. A.; Topsøe, N.-Y.; Slabiak, T.; Morsing, P.;Clausen, B.S.; Törqvist, E.; Topsoe, H. Microkinetic analysis of the selective catalytic reduction (SCR) of nitric oxide over vanadia /titania-based catalysts. Stud. Surf. Sci. Catal. 1993, 75, 1325-1337. (125) Tuenter, G.; vanLeeuwen, W. F.; Snepvangers, L. J. M. Kinetics and mechanism of the NOx reduction with NH3 on V2O5-WO3-TiO2 catalyst. Ind. Eng. Chem. Prod. Res. Dev. 1986, 25, 633–636. (126) Yang, S.; Wang, C.; Li, J.; Yan, N.; Ma, L.; Chang, H. Low temperature selective catalytic reduction of NO with NH3 over Mn-Fe spinel: Performance, mechanism and kinetic study. Appl. Catal. B: Environ. 2011, 110, 71–80. (127) Yang, S.; Li, J.; Wang, C.; Chen, J.; Ma, L.; Chang, H.; Chen, L.; Peng, Y.; Yan, N. Fe-Ti spinel for the selective catalytic reduction of NO with NH3: Mechanism and structure-activity relationship. Appl. Catal. B: Environ. 2012, 117–118, 73–80. (128) Efstathiou, A. M.; Fliatoura, K. Selective catalytic reduction of nitric oxide with ammonia over V2O5/TiO2 catalyst: A steady-state and transient kinetic study. Appl. Catal. B: Environ. 1995, 6, 35–59. (129) Amiridis, M. D.; Duevel, R.V.; Wachs, I. E. The effect of metal oxide additives on the activity of V2O5 /TiO2 catalysts for the selective catalytic reduction of nitric oxide by ammonia. Appl. Catal. B: Environ. 1999, 20, 111–122. (130) Nahavandi, M. Selective catalytic reduction (SCR) of NO by Ammonia over V2O5/TiO2 catalyst in a catalytic filter medium and honeycomb reactor: A kinetic modeling study. Brazilian J. Chem. Eng. 2015, 32, 875–893. (131) Lee, T.; Bai, H. Low temperature selective catalytic reduction of NOx with NH3 over Mn-based catalyst: A review. AIMS Environ. Sci. 2016, 3, 261–289. (132) Beeckman, J. W.; Hegedus, L. L. Design of monolith catalysts for power plant NOx emission control. Ind. Eng. Chem. Res. 1991, 30, 969–978. (133) Pinoy, L. J.; Hosten, L. H. Experimental and kinetic modelling study of DeNOx on an industrial V2O5-WO3/TiO2 catalyst. Catal. Today 1993, 17, 151–158. (134) Takagi, M.; Kawai, T.; Soma, M.; Onishi, T.; Tamaru, K. The mechanism of the reaction between NOx and NH3 on V2O5 in the presence of oxygen. J. Catal. 1977, 50, 441–446. (135) Tronconi, E.; Forzatti, P. Adequacy of lumped parameter models for SCR reactors with monolith structure. AIChE J. 1992, 38, 201–210. (136) Boudart, M. Kinetics of Chemical Processes, 1st ed.; Prentice-Hall:New Jersey,1968; p 242. (137) Zevenhoven, R.; Kilpinen, P. Control of pollutants in flue gases and fuel gases,

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1st ed.; Laboratory of Energy Engineering and Environmental Protection, Helsinki University of Technology: Espoo, Finland, 2002; p 1-12. (138) Weber, R.; Orsino, S.; Lallemant, N.; Verlaan, A. Combustion of natural gas with high-temperature air and large quantities of flue gas. Proc. Combust. Inst. 2000, 28, 1315–1321. (139) Lietti, L.; Nova, I.; Forzatti, P. Selective catalytic reduction (SCR) of NO by NH3 over TiO2-supported V2O5–WO3 and V2O5–MoO3 catalysts. Top. Catal. 2000, 11, 111–122. (140) Turco, M.; Lisi, L.; Pirone, R.; Ciambelli, P. Effect of water on the kinetics of nitric oxide reduction over a high-surface-area V2O5/TiO2 catalyst. Appl. Catal. B: Environ. 1994, 3, 133–149. (141) Tufano, V.; Turco, M. Kinetic modelling of nitric oxide reduction over a highsurface area V2O5-TiO2 catalyst. Appl. Catal. B: Environ. 1993, 2, 9–26. (142) R.Q. Long; R.T. Yang. Selective catalytic reduction of NO with ammonia over V2O5 doped TiO2 pillared clay catalysts. Appl. Catal. B: Environ. 2000, 24, 13–21. (143) Forzatti, P. Present status and perspectives in de-NOx SCR catalysis. Appl. Catal. A: Gen. 2003, 222, 221–236. (144) Forzatti, P. Environmental catalysis for stationary applications. Catal. Today 2000, 62, 51–65. (145) Topsoe, N. Y.; Slabiak, T.; Clausen, B. S.; Srnak, T. Z.; Dumesic, J. A. Influence of water on the reactivity of vanadia titania for catalytic reduction of NOx. J. Catal. 1992, 134, 742–746. (146) Nova, I.; Lietti, L.; Tronconi, E.; Forzatti, P. Transient response method applied to the kinetic analysis of the DeNOx–SCR reaction. Chem. Eng. Sci. 2001, 56, 1229–1237. (147) Chen, J. P.; Yang, R. T. Mechanism of poisoning of the V2O5/TiO2 Catalyst for the reduction of NO by NH3. J. Catal. 1990, 125, 411–420. (148) Chen, J. P.; Yang, R. T. Selective catalytic reduction of NO with NH3 on SO4/TiO2 superacid catalyst. J. Catal. 1993, 139, 277–288. (149) Jecht U. Flue gas analysis in industry - Practical guide for emission and process measurements, 2nd ed.;Testo: West Chester, 2004; p 1-145. (150) Tobergte, D. R.; Curtis, S. Relationship between suifur dioxide oxidation and selective catalytic NO reduction by ammonia on V2O5-TiO2 catalysts doped with WO3 and Nb2O5. React. Kinet. Catal. Lett. 1994, 52, 101–106. (151) Shin, B.; Lim, S. WO3 and MoO3 addition effect on V2O5/TiO2 as promoters for removal of NOx and SOx from stationary sources. Korean J. Chem. Eng., 1994, 11, 254–260.

ACS Paragon Plus Environment

Page 38 of 42

Page 39 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

(152) Waqif, M.; Saad, A. M.; Bensitel, M.; Bachelier, J.; Saur, O.; Lavalley, J. C. Comparative study of SO2 adsorption on metal oxides. J. Chem. Soc. Faraday Trans. 1992, 88, 2931. (153) Went, G. T.; Ted Oyama, S.; Bell, A. T. Laser Raman spectroscopy of supported vanadium oxide catalysts. J. Phys. Chem. 1990, 94, 4240–4246. (154) Dunn, J. P.; Jehng, J.-M.; Kim, D. S.; Briand, L. E.; Stenger, H. G.; Wachs, I. E. Interactions between surface vanadate and surface sulfate species on metal oxide catalysts. J. Phys. Chem. B 1998, 102, 6212–6218. (155) Saur, O.; Bensitel, M.; Saad, A. B. M.; Lavalley, J. C.; Tripp, C. P.; Morrow, B. A. The structure and stability of sulfated alumina and titania. J. Catal. 1986, 99, 104–110. (156) Waqif, M.; Bachelier, J.; Saur, O.; Lavalley, J. C. Acidic properties and stability of sulfate-promoted metal oxides. J. Mol. Catal. 1992, 72, 127–138. (157) Amiridis, M. D.; Wachs, I. E.; Deo, G.; Jehng, J. M.; Kim, D. S. Reactivity of V2O5 catalysts for the selective catalytic reduction of NO by NH3: Influence of vanadia loading, H2O, and SO2. J. Catal. 1996, 161, 247–253. (158) Ciambelli, P.; Fortuna, M. E.; Sannino, D.; Baldacci, A. The influence of sulphate on the catalytic properties of V2O5-TiO2 and WO3-TiO2 in the reduction of nitric oxide with ammonia. Catal. Today 1996, 29, 161–164. (159) Long, R. Q.; Yang, R. T. Catalytic performance and characterization of VO2+-exchanged titania-pillared clays for selective catalytic reduction of nitric oxide with ammonia. J. Catal. 2000, 196, 73–85. (160) Dunn, J. P.; Koppula, P. R.; Stenger, H. G.; Wachs, I. E. Oxidation of sulfur dioxide to sulfur trioxide over supported vanadia catalysts. Appl. Catal. B: Environ. 1998, 19, 103–117. (161) Wachs, I. E.; Jehng, J. M.; Deo, G.; Weckhuysen, B. M.; Guliants, V.V.; Benziger, J. B.; Sundaresan, S. Fundamental studies of butane oxidation over model-supported vanadium oxide catalysts: Molecular structure-reactivity relationships. J. Catal. 1997, 170, 75–88. (162) Dunn, J. P.; Stenger, H. G.; Wachs, I. E. Molecular structure–reactivity relationships for the oxidation of sulfur dioxide over supported metal oxide catalysts. Catal. Today 1999, 53, 543–556. (163) Svachula, J.; Alemany, L. J.; Ferlazzo, N.; Forzatti, P.; Tronconi, E.; Bregani, F. Oxidation of sulfur dioxide to sulfur trioxide over honeycomb DeNoxing catalysts. Ind. Eng. Chem. Res. 1993, 32, 826–834. (164) Jehng, J. M.; Deo, G.; Weckhuysen, B. M.; Wachs, I. E. Effect of water vapor on the molecular structures of supported vanadium oxide catalysts at elevated temperatures. J. Mol. Catal. A: Chem. 1996, 110, 41–54.

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(165) Ji, P.; Gao, X.; Du, X.; Zheng, C.; Luo, Z.; Cen, K. Relationship between the molecular structure of V2O5/TiO2 catalysts and the reactivity of SO2 oxidation. Catal. Sci. Technol. 2016, 6, 1187–1194. (166) Cristiani, C.; Bellotto, M.; Forzatti, P.; Bregani, F. On the morphological properties of tungsta-titania de-NOxing catalysts. J. Mater. Res. 1993, 8, 2019–2025. (167) Gilardoni, F.; Weber, J.; Baiker, A. Density functional investigation of the mechanism of the selective catalytic reduction of NO by NH3 over vanadium oxide model clusters. Int. J. Quantum Chem. 1995, 61,683–688. (168) Gilardoni, F.; Weber, J.; Baiker, A.; Gene, C. Mechanism of the vanadium oxide-catalyzed selective reduction of NO by NH3. A quantum chemical modeling. J. Phys. Chem. A 1997, 5639, 6069–6076. (169) Yuan, R.-M.; Fu, G.; Xu, X.; Wan, H.-L. Brønsted-NH4+ mechanism versus nitrite mechanism: new insight into the selective catalytic reduction of NO by NH3. Phys. Chem. Chem. Phys. 2011, 13, 453–460. (170) Anstrom, M.; Topsøe, N.-Y.; Dumesic, J. A.; Topsoe, N. Y.; Dumesic, J. A. Density functional theory studies of mechanistic aspects of the SCR reaction on vanadium oxide catalysts. J. Catal. 2003, 213, 115–125. (171) Soyer, S.; Uzun, A.; Senkan, S.; Onal, I. A quantum chemical study of nitric oxide reduction by ammonia (SCR reaction) on V2O5 catalyst surface. Catal. Today 2006, 118, 268–278. (172) Yao, H.; Chen, Y.; Zhao, Z.; Wei, Y.; Liu, Z.; Zhai, D.; Liu, B.; Xu, C. Periodic DFT study on mechanism of selective catalytic reduction of NO via NH3 and O2 over the V2O5(001) surface: Competitive sites and pathways. J. Catal. 2013, 305, 67–75. (173) Yin, X.; Han, H.; Gunji, I.; Endou, A.; Cheettu Ammal, S. S.; Kubo, M.; Miyamoto, A. NH3 adsorption on the Brönsted and Lewis acid sites of V2O5(010): A periodic density functional study. J. Phys. Chem. B 1999, 103, 4701–4706. (174) Chakrabarti, A.; Hermann, K.; Druzinic, R. Geometric and electronic structure of vanadium pentoxide: A density functional bulk and surface study. Phys. Rev. B 1999, 59, 583–590. (175) Vittadini, A.; Casarin, M.; Selloni, A. First principles studies of vanadia-titania monolayer catalysts: mechanisms of NO selective reduction. J. Phys. Chem. B 2005, 109, 1652–1655. (176) Shimizu, K.; Satsuma, A. Reaction mechanism of H2-promoted selective catalytic reduction of NO with NH3 over Ag/Al2O3. J. Phys. Chem. C 2007, 111, 2259–2264.

ACS Paragon Plus Environment

Page 40 of 42

Page 41 of 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

(177) Arnarson, L.; Falsig, H.; Rasmussen, S. B.; Lauritsen, J.V.; Moses, P. G. The reaction mechanism for the SCR process on monomer V 5+ sites and the effect of modified Brønsted acidity. Phys. Chem. Chem. Phys. 2016, 18, 17071–17080. (178) Jaegers, N. R.; Wan, C.; Hu, M. Y.; Vasiliu, M.; Dixon, D. A.; Walter, E.; Wachs, I. E.; Wang, Y.; Hu, J. Z. Investigation of silica-supported vanadium oxide catalysts by High-Field 51V magic-angle spinning NMR. J. Phys. Chem. C 2017, 121, 6246–6254

ACS Paragon Plus Environment

ACS Catalysis 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

TOC

ACS Paragon Plus Environment

Page 42 of 42