An Asymmetric Supercapacitor with Both Ultra ... - ACS Publications

Dec 12, 2016 - ABSTRACT: Development of a supercapacitor device with both high gravimetric and volumetric energy density is one of the most important...
1 downloads 0 Views 1MB Size
Subscriber access provided by University of Otago Library

Article

An Asymmetric Supercapacitor with Both Ultra-High Gravimetric and Volumetric Energy Density Based on 3D Ni(OH)2/ MnO2@Carbon Nanotube and Activated Polyaniline-Derived Carbon Juanjuan Shen, Xiaocheng Li, Liu Wan, Kun Liang, Beng Kang Tay, Ling-Bin Kong, and Xingbin Yan ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b12370 • Publication Date (Web): 12 Dec 2016 Downloaded from http://pubs.acs.org on December 12, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

An Asymmetric Supercapacitor with Both Ultra-High Gravimetric and Volumetric Energy Density Based on 3D Ni(OH)2/MnO2@Carbon Nanotube and Activated Polyaniline-Derived Carbon Juanjuan Shen,

†,§,#

Xiaocheng Li,*,

§, †,



Liu Wan,§ Kun Liang, Beng Kang Tay,



Lingbin Kong, † and Xingbin Yan§



State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metal,

Lanzhou University of Technology, Lanzhou 730050, P. R. China §

Laboratory of Clean Energy Chemistry and Materials, Lanzhou Institute of Chemical

Physics, Chinese Academy of Sciences, Lanzhou 730000, P. R. China #

University of Chinese Academy of Science, Beijing, 100080, P. R. China



School of Electrical & Electronic Engineering, Nanyang Technological University,

50 Nanyang Avenue, Singapore 639798

KEYWORDS: asymmetric supercapacitor, energy density, high mass loading, nickel hydroxide/manganese dioxide composite, activated polyaniline-derived carbon

ABSTRACT: Development of the supercapacitor device with both high gravimetric and volumetric energy density is one of the most important requisite for their practical application in energy storage/conversion systems. Currently, improvement of the 1

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

gravimetric/volumetric energy density of supercapacitor is restricted by the insufficient utilization of positive materials at high loading density and the inferior capacitive behavior of negative electrodes. To solve these problems, we elaborately designed and prepared a 3D core-shell structured Ni(OH)2/MnO2@carbon nanotube (CNT) composite via a facile solvothermal process by using the thermal chemical vapor deposition grown-CNTs as support. Owing to the superiorities of core-shell architecture in improving the service efficiency of pseudocapacitive materials at high loading density, the prepared Ni(OH)2/MnO2@CNT electrode demonstrated a high capacitance value of 2648 F g-1 (1 A g-1) at a high loading density of 6.52 mg cm-2. Coupled with high performance activated polyaniline-derived carbon (APDC, 400 F g-1 at 1 A g-1), the assembled Ni(OH)2/MnO2@CNT//APDC asymmetric device delivered both high gravimetric and volumetric energy density (126.4 Wh kg-1 and 10.9 mWh cm-3, respectively), together with superb rate performance and cycling lifetime. Moreover, we demonstrate an effective approach for building high performance supercapacitor with high gravimetric/volumetric energy density.

1. INTRODUCTION Development of energy storage systems with high gravimetric and volumetric energy/power density is one of the major components of the renewable energy projects built by the government of the countries all over the world. Supercapacitors have attracted tremendous attention due to their low cost, high power density, and long cycling life characteristics.1-4 Traditionally, carbonaceous materials are extensively used as the predominant component of supercapacitor devices. However, due to the 2

ACS Paragon Plus Environment

Page 2 of 33

Page 3 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

low capacitive performance, it is great difficult for carbon-based symmetric supercapacitor devices to meet the rigorous requirements of external power load for gravimetric/volumetric energy density.5-8 It has been established that the improvement of the energy density (E) of a supercapacitive device can be realized by maximizing the capacitance value (C) or operating window (U) of the device, as decided by the formula E = CU 2 2 .9,10 In aqueous electrolyte, since the operation voltage of asymmetric

supercapacitor

(ASC)

device

is

restricted

by

the

decomposition voltage of water, the sole strategy for improving the energy density of the aqueous electrolyte-based ASC is to raise the capacitance value of the device (Ccell), which depends on that of positive (C+) and negative electrode(C-), according to the formula 1 C cell = 1 C + + 1 C − . Therefore, it is urgent demand to design and construct positive electrodes with high gravimetric/volumetric capacitance and matching negative materials. For positive electrodes, it has been accepted that pseudocapacitive materials exhibit higher specific capacitance than traditional carbonaceous materials.6,11 Typical pseudocapacitive materials include RuO2,3 MnO2,12 NiO,13 Ni(OH)2,14,15 Co3O4,16 Fe2O3,17 and their binary components, such as NiCo layered double hydroxide (LDH),18 NiAl LDH,19 NiZn LDH,20 NiCo2O4,21 and Ni(OH)2/NiO.22 Among them, the electrochemical performance of binary metal oxide/hydroxides is far superior to that of individual ones because of the synergic effect between two components.23,24 Inspired by the achievements in binary metal oxide/hydroxide, Ni(OH)2/MnO2 composite has recently received considerable interest due to their rich reserves and environmentally 3

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

benign nature. Theoretically, the doping of Ni atom with d-electrons in MnO2 can greatly enhance the electrochemical behavior of MnO2 by increasing conductivity, active site density and roughness.24 On the other hand, the doping of Mn ions in interlamellar space of turbostratic α-Ni(OH)2 can stabilize its crystal structure in alkaline solution.25 In addition, owing to the co-contribution of Ni2+/Ni3+ and MnO2/MnOOK couples, Ni(OH)2/MnO2 binary system offers richer redox reactions than either of the single ones, similar as that in Ni-Co LDH.18,26,27 Therefore, it is reasonable to deduce that Ni(OH)2/MnO2 composite would possess more excellent electrochemical performance than that of Ni(OH)2 and MnO2. Unfortunately, till now, only limited information is available for preparation of high performance Ni(OH)2/MnO2 composite. Besides the ingredient, the mass loading of electroactive material on current collector also has a huge effect on its supercapacitive performance. Generally, the electroactive materials can deliver excellent supercapacitive performance at low mass loading level (