Building Energy Storage Device on a Single ... - ACS Publications

Jul 14, 2011 - S S Ali , W J Li , K Javed , D W Shi , S Riaz , G J Zhai , X F Han .... Imran Shakir , Joon Hyock Choi , Muhammad Shahid , Shaukat Ali ...
0 downloads 0 Views 3MB Size
LETTER pubs.acs.org/NanoLett

Building Energy Storage Device on a Single Nanowire Sanketh R. Gowda,† Arava Leela Mohana Reddy,‡ Xiaobo Zhan,‡ and Pulickel M. Ajayan*,†,‡,§ †

Department of Chemical and Biomolecular Engineering, ‡Department of Mechanical Engineering and Materials Science, and Department of Chemistry, Rice University, Houston, Texas 77005, United States

§

bS Supporting Information ABSTRACT: Hybrid electrochemical energy storage devices combine the advantages of battery and supercapacitors, resulting in systems of high energy and power density. Using LiPF6 electrolyte, the Ni Sn/ PANI electrochemical system, free of Li-based electrodes, works on a hybrid mechanism based on Li intercalation at the anode and PF6 doping at the cathode. Here, we also demonstrate a composite nanostructure electrochemical device with the anode (Ni Sn) and cathode (polyaniline, PANI) nanowires packaged within conformal polymer core shell separator. Parallel array of these nanowire devices shows reversible areal capacity of ∼3 μAh/cm2 at a current rate of 0.03 mA/cm2. The work shows the ultimate miniaturization possible for energy storage devices where all essential components can be engineered on a single nanowire. KEYWORDS: Li ion battery, supercapacitor, hybrid electrochemical device, nanostructures

R

echargeable energy storage devices have revolutionized portable power delivery applications.1 12 The high energy Li ion battery and the high power supercapacitor are regarded as major players in energy storage.7 12 Hybrid electrochemical devices (HED) form an interesting class of reversible energy storage devices that try to combine the good features of both batteries (high energy) and supercapacitors (high power).1 3 Thin planar 2D designs for batteries have dominated the field of microscale energy storage with the successful realization of high power cells.13 15 Recently 3D designs for batteries have also attracted attention primarily due to their higher energy per footprint area compared to planar designs.15 The majority of 3D battery configurations have relied on the fabrication of electrode/ electrolyte materials on 3D micropatterned surfaces16 19 although a few reports exist that use nanostructured surfaces.20,21 The major bottleneck still is the reliable fabrication of conformal electrolyte layers around nanostructured electrode elements.20 22 Recent research reports have demonstrated ways of measuring and observing Li ion insertion within single nanowires as a powerful diagnostic tool to better understand Li ion electrochemistry at the nanoscale.23,24 Yet, the design and fabrication of a conformal single nanowire structure that embeds all components of an electrochemical storage device is still a dream and if such a structure is accomplished it could result in the ultimate miniaturization of energy storage. In addition, such devices should have advantages over conventional bulk devices due to the close proximity of electrodes between ultrathin electrolyte layers and ultrashort ion diffusion distances between the electrodes. Here we demonstrate the fabrication of such a novel hybrid electrochemical device with all the active components integrated onto single nanowires and r 2011 American Chemical Society

test the electrochemical performance of an array of such nanowires. Early work on HEDs, reported by Scrosati and co-workers, described the polyaniline/carbon dion battery.1 More recent research in the field of HEDs (which combine battery and the electrochemical double layer capacitor electrodes) has focused on using lithium titanate (LTO) anodes and activated carbon cathodes.2,3,25 Nanosized LTO has been used as the anode based on its good cyclic stability and rate capability. But due to the low specific capacity of LTO (160 mAh/g) and high Li insertion voltage (1.5 vs Li/Li+) there are limitations on the energy density that can be achieved. Also the high-temperature synthesis for LTO makes it an expensive fabrication process. Metallic/intermetallic-based anode materials such as Sn, Ni Sn, Cu Sn, Cu Sb have been shown to have very high specific capacity and good cyclic stability.26 28 The room-temperature electrodeposition fabrication process for Ni Sn makes it an attractive candidate for building thin film devices. On the other hand, polyaniline is well-known for its pseudocapacitive behavior due to the numerous oxidation states it can exist in by doping/ undoping processes.1,29 Polyaniline can also be synthesized easily by a variety of chemical and electrochemical polymerization techniques.1,29 Hence, we chose Ni Sn and polyaniline as the electrodes for our thin film energy storage device. Ni Sn was fabricated by electrochemical deposition directly onto a copper current collector substrate and characterized by X-ray diffraction (see Supporting Information Figure S1) and the polyaniline Received: May 20, 2011 Revised: July 4, 2011 Published: July 14, 2011 3329

dx.doi.org/10.1021/nl2017042 | Nano Lett. 2011, 11, 3329–3333

Nano Letters

LETTER

Figure 2. (A) Schematic representation of thin film device showing anode, Ni Sn, and cathode, PANI, separated by a thin celgard film. (B) Discharge capacity vs cycle number plots for galvanostatic charge/ discharge conducted on thin film Ni Sn/PANI device at current rates 0.2, 0.3, and 0.4 mA/cm2 for 20 cycles.

Figure 1. (A) Voltage vs time curves of the thin film hybrid electrochemical device using polymer gel electrolyte (PEO soaked in solution of 1 M LiPF6 in EC/DMC (1:1 by volume)) cycled at current rate ∼0.2 mA/cm2. (B) Galvanostatic charge/discharge measurements conducted at current rate of ∼0.2 mA/cm2 for 25 cycles showing a reversible capacity of ∼100 μAh/cm2 at a Coulombic efficiency of ∼90%. (C) Schematic diagram of the mechanism of the energy storage device operation showing Li ion insertion/deinsertion at the Ni Sn anode and PF6 ion doping/undoping at the PANI cathode during charge and discharge processes.

electrode was drop coated onto Al current collector (see Supporting Information Materials and Methods). The total device area was ∼0.5 cm2. The voltage versus time and cycling characteristics for the Ni Sn thin films against Li foil showed the typical Li insertion/deinsertion behavior and initial and reversible capacity of ∼800 and 350 mAh/g, respectively, at current rate ∼0.2 mA/cm2 25 (see Supporting Information Figure S2). Polyaniline is known to show a reversible capacity of around

∼30 mAh/g with an initial capacity of ∼60 mAh/g for the redox doping/undoping process.1 On the basis of the initial specific capacities observed for the two electrodes, we constructed a full cell consisting of Ni Sn anode and polyaniline cathode with a cathode to anode mass ratio typically around ∼14, hence taking into consideration the irreversible losses of the electrodes. Galvanostatic charge/discharge experiments were conducted on the Ni Sn/PANI full cell between 1.5 and 3.4 V at a current rate of ∼0.2 mA/cm2 and the voltage versus time curves were recorded (Figure 1A). The cells were cycled for ∼25 cycles and a stable reversible capacity of ∼100 μAh/cm2 was obtained at Coulombic efficiencies of ∼90% (Figure 1B). It is also important to note that in hybrid devices there is depletion of salts during charge/discharge processes. To account for that, typically we have used two times (100% more) more of minimum Li salt (LiPF6) required for our PANI/Ni Sn electrochemistry (see Supporting Information). This helps to maintain the ionic conductivity and hence the rate capability of the device during the charge/discharge processes. To confirm the electrochemistry of this novel energy storage device we conducted exsitu XPS analysis after the first charge process for both electrodes (see Supporting Information Figure S3, S4). Li 1s, Ni 2p, and Sn 3d peaks appear in the Ni Sn electrode material after the first charge process. Consequently C 1s, N 1s, Cl 2p, and O 2p peaks are seen in the PANI electrode material after the first charge process. From these observations, we confirm that the Li ion insertion takes place into the Ni Sn electrode through electrochemical alloying mechanism during the charge process and simultaneously the PF6 ions doped into the polyaniline electrode. During discharge process, we expect Li ion deinsertion and PF 6 ion undoping from Ni Sn and 3330

dx.doi.org/10.1021/nl2017042 |Nano Lett. 2011, 11, 3329–3333

Nano Letters

LETTER

Figure 3. (A) Schematic representation of alumina template based fabrication process for the nanowire energy storage device. (B) TEM image of the anode/electrolyte (Ni Sn/polyethylene oxide) core/shell nanowires. (C) Schematic representation of the nanowire energy storage device. (D) Transmission electron microscope (TEM) image of the cathode/electrolyte (polyaniline/polyethylene oxide) core/shell nanowires.

PANI electrodes, respectively, back into the electrolyte (Figure 1C). The electrochemical cells were fabricated and tested as shown in the schematic in Figure 2A where the thin film Ni Sn anode and PANI cathode were stacked on each other separated by a Celgard separator soaked in LiPF6 based electrolyte. Galvanostatic charge/discharge tests were conducted at rates ∼0.2, 0.3, and 0.4 mA/cm2 and reversible capacities of ∼100, 75, and 56 μAh/cm2 were obtained after ∼20 cycles of charge/discharge (Figure 2B). Voltage versus time plots for the galvanostatic tests conducted at current rates 0.3 and 0.4 mA/cm2 are shown in the Supporting Information (Figure S5). From the charge/discharge curves at different rates we can infer that the device shows good rate capability upon cycling at different current rates. We were able to obtain fast current rates of operation for our hybrid device due to the pseudocapactive29 (fast redox reaction) nature of our cathode material hence delivering high capacity per unit area at high power. At the PANI cathode of our hybrid devices, PF6 ion intercalation takes place that is based on a fast doping/undoping process.1,2 Also the increase in the specific capacity of the anode and the lower Li insertion potential hence could improve the

energy density of the device. It is also noteworthy to mention that our device is based on a room-temperature fabricated, Li free, polymer cathode (PANI), which makes the device costeffective. It is important to note that we are able to achieve good rate capability with a thick celgard separator (∼20 μm thick). These hybrid devices have been fabricated in the nanowire design to study their electrochemical performance. The electrodes we have chosen (Ni Sn and PANI) can be easily synthesized at room temperature using simple, scalable techniques such as electrodeposition and drop coating, hence making it ideal for fabricating nanostructured microscale energy storage devices. We utilize an anodic alumina membrane as the template for the fabrication of the nanowire hybrid energy storage. By a combination of electrodeposition of Ni Sn, chemical widening of the pores of the anodic alumina, and drop coating of separator (polyethylene oxide or PEO) and cathode (polyaniline) layers, we are able to fabricate a full electrochemical device on individual nanowires (see Supporting Information Materials and Methods and Figure 3A). Transmission electron microscopy is used to characterize the interfaces between electrode and electrolyte layers. Figure 3B D clearly depicts 3331

dx.doi.org/10.1021/nl2017042 |Nano Lett. 2011, 11, 3329–3333

Nano Letters

Figure 4. (A) Voltage vs time graphs for the galvanostatic measurements conducted on the conformal nanowire energy storage device. Inset: Schematic representation of vertically aligned array of the nanowire hybrid device. (B) Discharge capacity vs cycle number plot showing reversible capacities at three different current rates (0.03, 0.05, 0.07 mA/cm2) up to 30 cycles.

the conformal electrode/electrolyte configuration for both the cathode and anode. The anode (Ni Sn) is coated with a thin electrolyte (PEO) layer as shown in Figure 3B and the cathode (PANI) is also coated with a thin layer of electrolyte (PEO) as shown in Figure 3D. The anode and the cathode are separated by a ∼20 nm layer of PEO electrolyte (see Supporting Information Figure S6). A schematic of the final nanowire structure for the hybrid energy storage device is shown in Figure 3C. The conformal wrapping of the PEO layer around both cathode and anode of the device ensures excellent ion accessibility to the electrodes. The ability to coat thin conformal layers of electrolyte around electrodes with different lengths allows control of the capacity per unit area of the device.20 Vertically aligned arrays of the nanowire devices were tested for their electrochemical performance. The mass of the electrodes in the cell is determined by the thickness of the alumina template (the length of the nanowires) used hence defining the capacity delivered by the device. We have used ∼60 μm thick anodic alumina templates for this study and due to vast density difference between Ni Sn and polyaniline we had to grow short nanorods (∼300 nm in length) of Ni Sn and fill the rest of the template with polyaniline cathode to ensure close to optimum cathode to anode mass ratio. The total device area was measured to be ∼0.4 cm2. The voltage versus time plot for the galvanostatic measurement at current rate 0.03 mA/cm2 between 0.02 and 3.4 V is shown in Figure 4A. It is

LETTER

interesting to observe that the discharge behavior in the nanostructured device is slightly different from that of the thin film device. It is observed in Figure 4A that there exists voltage drops at higher voltage ranges and most of the discharge capacity is observed below 2 V unlike the case of the thin film design. This could be attributed to the inherent self-discharge/capacitive phenomena associated with the nanostructured device due to the ultrathin nature of the separator used.16 As it has been suggested by Rolison et al.,16 self-discharge is a serious hurdle in batteries with ultrathin separators due to the leakage current associated with such devices. To help hold the charge better the use of polymer separators with minute electronic conductivity and optimal thickness is critical. Rate capability of the nanowirebased energy storage device was studied by conducting the galvanostatic measurements at different current rates. Cycling characteristics at the current rates 0.03, 0.05, and 0.07 mA/cm2 are shown in Figure 4B. Voltage versus time plots for rates 0.05 and 0.07 mA/cm2 are shown in the Supporting Information (Figure S7). Stable reversible capacities of ∼3, 1.5, and 1 μAh/ cm2 have been achieved at current rates 0.03, 0.05, and 0.07 mA/ cm2, respectively, up to 30 cycles of charge/discharge. Coulombic efficiencies of ∼65% have been obtained for these nanowirebased energy storage devices. The low Coulombic efficiency could be attributed to the ultrathin (∼20 nm) nature of the separator used that could thereby lead to potential drops due to self-discharge phenomenon.16,17 An optimized thickness for the separator layer between the two electrodes could help in achieving higher columbic efficiencies. The discharge capacity per unit area of the nanowire device is observed to be smaller compared to the thin film data (Figure 2B), which could be due to the smaller thickness of electrodes used, the reduced coloumbic efficiency and capacitive behavior observed with nanosized separations between electrodes.16,17 By increasing electrode lengths (using alumina templates of different thicknesses) of cathode and anode it could be possible to improve capacity per unit area of the device.20 Such nanowire devices could help in understanding more in-depth electrochemical reactions at the nanoscale, for the realization of high-performance electrochemical energy storage devices for future applications. In conclusion, we have fabricated a new energy storage device on a single nanowire and tested a parallel array of such functional nanowire devices for their electrochemical performance. The nanowire design for the Ni Sn/PANI system was fabricated using a conformal electrode/electrolyte configuration and had an ultrathin, ∼20 nm, separator (PEO) between the electrodes to improve rate capability characteristics. The nanowire energy storage device built using Li free electrodes showed good charge/discharge characteristics with a discharge capacity of 3 μAh/cm2 at a current rate of 0.03 mA/cm2. Such nanowire energy storage devices could be useful in better understanding Li ion electrochemistry at the nanoscale and to power nanoelectronic devices.

’ ASSOCIATED CONTENT

bS

Supporting Information. Additional information and figures. This material is available free of charge via the Internet at http://pubs.acs.org.

’ AUTHOR INFORMATION Corresponding Author

*E-mail: [email protected]. 3332

dx.doi.org/10.1021/nl2017042 |Nano Lett. 2011, 11, 3329–3333

Nano Letters

LETTER

’ ACKNOWLEDGMENT P.M.A. acknowledges the support from the Hartley Family Foundation, Rice University start up funds, National Institute of Health, Army Research Office, and Multidisciplinary University Research Initiative (MURI) grant for providing funding for this work. S.R.G. acknowledges the support received by the grant RO1CA12842 from the National Institute of Health. A.L. M.R. acknowledges the support from Army Research Office. X.Z. acknowledges the support from the MURI grant. ’ REFERENCES (1) Spila, E.; Panero, S.; Scrosati, B. Electrochim. Acta 1998, 43, 1651. (2) Amatucci, G. G.; Badway, F.; Du Pasquier, A.; Zheng, T. J. Electrochem. Soc. 2001, 148, A930. (3) Du Pasquier, A.; Laforgue, A.; Simon, P.; Amatucci, G. G.; Fauvarque, J.-F J. Electrochem. Soc. 2002, 149, A302. (4) Arico, A. S.; Bruce, P.; Scrosati, B.; Tarascon, J. M.; Van Schalkwijk, W. Nat. Mater. 2005, 4, 366. (5) Taberna, P. L.; Mitra, S.; Poizot, P.; Simon, P.; Tarascon, J. M. Nat. Mater. 2006, 5, 567. (6) Nam, K. T.; Kim, D.-W.; Yoo, P. J.; Chiang, C.-Y.; Meethong, N.; Hammond, P. T.; Chiang, Y. M.; Belcher, A. M. Science 2006, 312, 885. (7) Van Schalkwijk, W.; Scrosati, B. Advances in Lithium-Ion Batteries; Kluwer Academic/Plenum: New York; 2002. (8) Armand, M.; Tarascon, J.-M. Nature 2008, 451, 652. (9) Chung, S. Y.; Bloking, J. T.; Chiang, Y. M. Nat. Mater. 2002, 1, 123. (10) Dillon, A. C. Chem. Rev. 2010, 110, 6856. (11) Simon, P.; Gogotsi, Y. Nat. Mater. 2008, 7, 845. (12) Yang, C. M.; Kim, Y.-J.; Endo, M.; Kano, H.; Yudasaka, M.; Iijima, S.; Kaneko, K. J. Am. Chem. Soc. 2007, 129, 20. (13) Bates, J. B.; Dudney, N. J.; Neudecker, B.; Ueda, A.; Evans, C. D. Solid State Ionics 2000, 135, 33. (14) Dudney, N. J. Solid-state thin-film rechargeable batteries. Mater. Sci. Eng., B 2005, 116, 245. (15) Neudecker, B. J.; Zuhr, R. A.; Bates., J. B. J. Power Sources 1999, 81, 27. (16) Long, J. W.; Dunn, B.; Rolison, D. R.; White, H. S. Chem. Rev. 2004, 104, 4463. (17) Min, H.-S.; Park, B. Y.; Taherabadi, L.; Wang, C.; Yeh, Y.; Zaouk, R.; Madou, M. R.; Dunn, B. J. Power Sources 2008, 178, 795. (18) Nam, K. T.; Wartena, R.; Yoo, P. J.; Liau, F. W.; Lee, Y. J.; Chiang, Y. M.; Hammond, P. T.; Belcher, A. M. Proc. Natl. Acad. Sci. U.S.A. 2008, 105, 17227. (19) Golodnitsky, D.; Nathan, M.; Yufit, V.; Strauss, E.; Freedman, K.; Burstein, L.; Gladkich, A.; Peled, E. Solid State Ionics 2006, 177, 26. (20) Gowda, S. R.; Reddy, A. L. M.; Manikoth, S. M.; Zhan, X.; Ci, L.; Ajayan, P. M. Nano Lett. 2011, 11, 101. (21) Prieto, A. L.; Mosby, J. M.; Arthur, T. S. U.S. Patent App. 12/ 391,197, 2009. (22) Long, J. W.; Rhodes, C. P.; Young, A. L.; Rolison, D. R. Nano Lett. 2003, 3, 1151. (23) Huang, J. Y.; Zhong, L.; Wang, C. M.; Sullivan, J. P.; Xu, W.; Zhang, L. Q.; Mao, S. X.; Hudak, N. S.; Liu, X. H.; Subramanian, A.; Fan, H.; Qi, L.; Kushima, A.; Li, J. Science 2010, 330, 1515. (24) Mai, L.; Dong, Y.; Xu, L.; Han, C. Nano Lett. 2010, 10, 4273. (25) Pasquier, A. D.; Plitz, I.; Menocal, S.; Amatucci, G. J Power Sources 2003, 115, 171. (26) Winter, M.; Besenhard, J. O. Electrochim. Acta 1999, 45, 31. (27) Hassoun, J.; Panero, S.; Scrosati, B. J Power Sources 2006, 160, 1336. (28) Hassoun, J.; Panero, S.; Simon, P.; Taberna, P. L.; Scrosati, B. Adv. Mater. 2007, 19, 1632. (29) Gupta, V.; Miura, N. Mater. Lett. 2006, 60, 1466. 3333

dx.doi.org/10.1021/nl2017042 |Nano Lett. 2011, 11, 3329–3333