Case Study on Screening Emerging Pollutants in Urine and Nails

Mar 15, 2017 - World chemical outlook for 2018. Even when the economic times are good, one region of the globe typically lags. Perhaps Japan is in rec...
0 downloads 9 Views 890KB Size
Subscriber access provided by UNIV OF UTAH

Article

Case study on screening emerging pollutants in urine and nails Andreia Alves, Georgios Giovanoulis, Ulrika Lena Nilsson, Claudio Erratico, Luisa Lucattini, Line Småstuen Haug, Griet Jacobs, Cynthia A. de Wit, Pim E.G. Leonards, Adrian Covaci, Jorgen Magnér, and Stefan Voorspoels Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b05661 • Publication Date (Web): 15 Mar 2017 Downloaded from http://pubs.acs.org on March 15, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 22

Environmental Science & Technology

200x92mm (150 x 150 DPI)

ACS Paragon Plus Environment

Environmental Science & Technology

1

Case study on screening emerging pollutants in

2

urine and nails

3 4

Andreia Alvesa,b,1, Georgios Giovanoulisc,d,1, Ulrika Nilssond, Claudio Erraticob, Luisa

5

Lucattinie, Line S. Haugf, Griet Jacobsa, Cynthia A. de Witd, Pim E.G. Leonardse, Adrian

6

Covacib, Jörgen Magnerc, Stefan Voorspoelsa*

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

a

23

Health, Lovisenberggata 8, 0456 Oslo, Norway

Flemish Institute for Technological Research (VITO NV), Boeretang 200, 2400 Mol, Belgium b

Toxicological Centre, Department of Pharmaceutical Sciences, University of Antwerp, Universiteitsplein 1, B-2610 Wilrijk, Belgium c

IVL Swedish Environmental Research Institute, SE-100 31, Stockholm, Sweden

d

Department of Environmental Science and Analytical Chemistry (ACES), Stockholm University, SE-106 91, Stockholm, Sweden e

Institute for Environmental Studies, VU University Amsterdam, De Boelelaan 1087, 1081 HV Amsterdam, The Netherlands f

Domain of Infection Control and Environmental Health, Norwegian Institute of Public

24 25 26 27

1

-equal contribution from first authorship between A. Alves and G. Giovanoulis

28 29 30

*corresponding author: Stefan Voorspoels (VITO NV)

31

Tel.+32 14 33 50 21, Fax.+ 32 14 31 94 72

32

E-mail address: [email protected]

33 34 35 36

1 ACS Paragon Plus Environment

Page 2 of 22

Page 3 of 22

37

Environmental Science & Technology

Abstract

38

Alternative plasticizers and flame retardants (FRs) have been introduced as replacements

39

for banned or restricted chemicals, but much is still unknown about their metabolism and

40

occurrence in humans. We identified the metabolites formed in vitro for four alternative

41

plasticizers (acetyltributyl citrate (ATBC), bis(2-propylheptyl) phthalate (DPHP), bis(2-

42

ethylhexyl) terephthalate (DEHTP), bis(2-ethylhexyl) adipate (DEHA)) and one FR (2,2-bis

43

(chloromethyl)-propane-1,3-diyltetrakis(2-chloroethyl) bisphosphate (V6)). Further, these

44

compounds and their metabolites were investigated by LC/ESI-Orbitrap-MS in urine and

45

finger nails collected from a Norwegian cohort.

46

Primary and secondary ATBC metabolites had detection frequencies (% DF) in finger

47

nails ranging from 46 to 95%. V6 was identified for the first time in finger nails, suggesting

48

that this matrix may also indicate past exposure to FRs as well as alternative plasticizers.

49

Two isomeric forms of DEHTP primary metabolite were highly detected in urine (97% DF)

50

and identified in finger nails, while no DPHP metabolites were detected in vivo. Primary

51

and secondary DEHA metabolites were identified in both matrices, and the relative

52

proportion of the secondary metabolites was higher in urine than in finger nails; the opposite

53

was observed for the primary metabolites. As many of the metabolites present in in vitro

54

extracts were further identified in vivo in urine and finger nail samples, this suggests that in

55

vitro assays can reliably mimic the in vivo processes. Finger nails may be a useful non-

56

invasive matrix for human biomonitoring of specific organic contaminants, but further

57

validation is needed.

58 59

Keywords: Finger nails, Urine, LC/ESI-Orbitrap-MS, in vitro metabolism, alternative

60

plasticizers, V6

61

2 ACS Paragon Plus Environment

Environmental Science & Technology

62

1. Introduction

63

Recently, new alternative plasticizers have been introduced on the market to replace

64

bis(2-ethylhexyl) phthalate (DEHP), one of the major toxic phthalates used worldwide.

65

DEHP is listed under REACH legislation as a ‘substance of very high concern’ (SVHC),

66

with demonstrated carcinogenic (Group 2B), reproductive toxicity and endocrine disrupting

67

effects on humans.1

68

Alternative plasticizers have been found to migrate out of polymeric products to a lesser

69

extent.2 Bui et al.2 categorized more than ten different chemical families of alternative

70

plasticizers (i.e. adipates, citrates, terephthalates, among other). Many of these alternative

71

substances are used in similar applications as phthalates, e.g. in toys, vinyl flooring, coated

72

fabrics, gloves, plastic tubing, artificial leather, shoes, sealants, carpet, cosmetic products,

73

medical devices, pharmaceutical tablet coatings, food packaging and beverage closures.2,3

74

For instance, the high molecular weight phthalate bis(2-propylheptyl) phthalate (DPHP) is

75

currently used as a major DEHP substitute.4

76

Limited information is available on the toxicological aspects of the alternative

77

plasticizers, but there are indications of lower toxicity than for DEHP (e.g. no acute toxicity

78

or genotoxicity). However, some recent studies have shown endocrine disrupting potential,

79

developmental and neurological effects and liver carcinogenicity in rats for some of these

80

new chemicals (i.e. for acetyltributyl citrate (ATBC) and bis(2-ethyhexyl) adipate

81

(DEHA)).2,5,6 In contrast, other studies did not show any adverse systemic toxicity7 or

82

reproductive toxicity in rats8 for some other alternatives (e.g. bis(2-ethylhexyl) terephthalate

83

(DEHTP)).

84

As described in Bui et al.2, humans are exposed to these alternative plasticizers. The

85

estimated risk ratio between the daily intake and the threshold limit for DPHP for infants

86

was 3.4, raising some concern about the use of this plasticizer for example in childcare

87

products and toys.9

88

Another group of chemicals of high concern in regard to human exposure is flame

89

retardants (FRs). Similar to phthalate esters, FRs have been used in a wide range of

90

consumer products (e.g. furniture, textiles, electronic devices, plastics, etc.).10 As a

91

consequence of their toxicity, polybrominated diphenyl ether (PBDEs) (e.g. penta-, octa-

92

and deca-BDE) were banned or restricted from the market11,12 leading to demand for new

93

alternative FRs, such as 2,2-bis(chloromethyl)-propane-1,3-diyltetrakis(2-chloroethyl)

94

bisphosphate (V6). According to an EU risk assessment report13, V6 is primarily used in

3 ACS Paragon Plus Environment

Page 4 of 22

Page 5 of 22

Environmental Science & Technology

95

flexible polyurethane foam and is highly suitable for automotive and furniture applications.

96

Although in the EU report, no acute toxicity to fish, algae and other invertebrates has been

97

observed, possible neurotoxicity and reproductive toxicity were associated with V6

98

exposure.13,14

99

phosphate (TCEP)15,16, which is present as an impurity in the commercial V6 mixture at

100

levels of 4.5-7.5%.17-19 Little is known about V6 toxicity in humans, but studies in dust and

101

air indicate increasing concentrations indoors.17 Very high concentrations were found in

102

foam used to produce baby products (> 24 mg/g) raising concern about human exposure17.

In fact, V6 is structurally related to the phased-out tris(2-chloroethyl)

103

Recent biomonitoring studies identified the presence of a few alternative plasticizers,

104

such as DPHP, DEHTP and DEHA through their oxidative metabolites in urine.4, 20-23 To

105

our knowledge, the presence of other alternative plasticizers and FRs, such as V6, in urine

106

and/or in other non-invasive matrices such as finger nails has not yet been explored. For

107

urine the exposure is almost immediate depending on the metabolic rate and consequent

108

excretion, while for nails the time window is approximately six months, which is the time it

109

takes for nails to grow out of the nail bed. Therefore, nails have the advantage to indicate

110

long-term exposure. In addition, due to sampling advantages (e.g. cost reduction, less

111

storage and sample stability), finger nails were considered as an alternative matrix for

112

human biomonitoring (HBM).24-27

113

This study is the first where: 1) the metabolites of ATBC, DEHTP, DEHA, DPHP, and

114

V6 identified in in vitro assays were screened in vivo in two non-invasive matrices (finger

115

nails and urine); 2) the elucidation of the new metabolites of alternative plasticizers and FRs

116

(and their fragments) was performed by LC/ESI-Orbitrap-MS; 3) the validity of using urine

117

and finger nails as a non-invasive method to assess exposure to new pollutants was tested in

118

a human cohort.

119 120

2. Materials and Methods

121

2.1 Reagents and Chemicals

122

Neat standards for ATBC (98%), DEHA (99%), DEHTP (≥96%) were obtained from

123

Sigma-Aldrich (Schenelldorf, Germany). Standards for V6 and DPHP were purchased from

124

AccuStandard (Hattersheim, Germany) and Toronto Research Chemicals (Toronto,

125

Canada), respectively. All standard stock solutions (1 mM) were prepared in methanol.

4 ACS Paragon Plus Environment

Environmental Science & Technology

126

LC/MS-grade methanol and acetonitrile were purchased from Fisher Scientific

127

(Loughborough, UK). The ultrapure water was obtained from a Milli-Q ultrapure water

128

system (Advantage A10 system, Overijse, Belgium). Trichloroethylene and formic acid (99

129

%) were supplied by Merck (Darmstadt, Germany). Trifluoroacetic acid (TFA, 99 %) was

130

supplied by Sigma-Aldrich (Steinheim, Germany). Ammonium acetate buffer (NH4Ac) was

131

prepared by dissolving 1.93 g of ammonium acetate (99.99% purity, Sigma-Aldrich,

132

Diegem, Belgium) in 100 mL ultra-pure water and acidifying the solution dropwise to pH

133

6.5 with glacial acetic acid. The enzyme β-glucuronidase (E. coli K12) was supplied by

134

Roche Applied Sciences (Mannheim, Germany).

135 136

2.2 In vitro metabolism of ATBC, DEHTP, DEHA, DPHP and V6

137

To the authors’ knowledge, no authentic standards for most of the metabolites of ATBC,

138

DPHP, DEHTP, DEHA and V6 (see Table SI-1) identified in vitro, were commercially

139

available at the time of this study. To bridge this key gap, each compound of interest was

140

individually incubated with human liver/intestinal microsomes and/or human liver S9

141

fractions (see FIG SI-1). Afterwards, the formed metabolites were extracted by liquid-liquid

142

extraction. Positive and negative controls were also prepared to monitor the marker activity

143

of key families of enzymes

144

metabolite standards can be found in the SI. These in vitro metabolic extracts were used as

145

reference solutions to create an in house fingerprint mass spectra database for target

146

screening in urine and nail samples.

28-31

More details regarding the in vitro generation of the

147 148

2.3 Nails and urine sampling from a Norwegian cohort

149

Details about the sampling are described in Papadopoulou et al.32 Finger nail (N=59) and

150

urine (morning) samples (N=61) were collected from 61 volunteers living in the greater

151

Oslo area (Norway). The sampling was approved by the Regional Committee for Medical

152

Research Ethics (REK) in Norway (N° 2013/1269) and before starting the campaign, all

153

participants gave written informed consent to participate. Until analysis all samples were

154

stored at -20°C. Before the extraction, residues of nail polish and dirt were cleaned from the

155

nails using acetone, as previously described.25-27,33

156 157

5 ACS Paragon Plus Environment

Page 6 of 22

Page 7 of 22

Environmental Science & Technology

158

2.4 Extraction of alternative plasticizers and V6 from nails and urine

159

Previously optimized methods were used for extraction of the target plasticizers, V6 and

160

their metabolites in nails and urine.25,26,34 For nails, 30 mg of cut pieces were weighed into

161

glass vials followed by extraction of the target analytes using ultrasound-assisted dispersive

162

liquid-liquid micro-extraction (US-DLLME) as described by Alves et al.25,26 Urine samples

163

were extracted following a method involving deconjugation of the phthalate glucuronide,

164

validated by Servaes et al.34 Since no internal standards and individual standards of the

165

metabolites were commercially available, only qualitative analyses (screening) were

166

possible. Similarly to Giovanoulis et al.33 in which the same urine and finger nail sample

167

extracts were used for the quantification of phthalate and DINCH metabolites, field (n1=10)

168

and procedural blanks (n2=5) were analyzed for each extraction method without any

169

phthalate contamination problems.25,26,31

170 171

2.5 LC/ESI-Orbitrap-MS analysis

172

For analysis, an LC (ThermoFisher Scientific, Bremen, Germany) equipped with an

173

Accela quaternary pump, a photodiode array detector (PDA) and a CTC PAL™ autosampler

174

(CTC Analytics, Zwingen, Switzerland) was used. Chromatographic separations was done

175

on a C18 column (100 × 2.1 mm, 1.7 µm) from Phenomenex Inc. (Torrance, CA, USA)

176

maintained at 40°C. The mobile phases used for elution of the target analytes were water

177

(A) and MeOH (B), both buffered with 0.1% formic acid, following the elution gradient of

178

B: initially 10%; at 9 min 60% keeping conditions constant until 13.6 min; 13.6-15 min 80

179

% keeping conditions constant until 15.5 min; 15.5-20.4 min 10%. The flow was kept at 0.3

180

mL/min and the injection volume was 7 µL.

181

For accurate mass measurements, an Orbitrap mass spectrometer (Q-Exactive™; Thermo

182

Fisher Scientific, Bremen, Germany) equipped with an ESI source working in polarity

183

switching mode was used (one analysis per mode). Operation parameters were as follows:

184

source voltage, 2.5 kV; sheath gas, 53 (arbitrary units); auxiliary gas, 14 (arbitrary units);

185

sweep gas, 3 (arbitrary units); and capillary temperature, 350°C.

186

Both in vitro metabolite extracts and human nail and urine samples were analyzed in

187

product ion scan followed by selective ion fragmentation (data dependent MS2 or ddMS2) in

188

positive and negative mode (one analysis per mode) to obtain additional structural

189

information. (resolving power set at 17500 FWHM, stepped collision energy 10, 30, 50 V,

190

isolation window: 1 m/z).

6 ACS Paragon Plus Environment

Environmental Science & Technology

191

Data were analyzed using the XCalibur software v.2.2 (ThermoFisher Scientific). The

192

accurate identification of the suspect analytes was performed using a mass deviation