Chemical Twinning in Zintl Phases - American Chemical Society

Laboratorium für Anorganische Chemie, ETH Zürich, Universitätstrasse 6, CH-8092 Zürich, Switzerland. ReceiVed February 3, 1999. In the systems Ba/Mg/(...
2 downloads 0 Views 85KB Size
Inorg. Chem. 1999, 38, 4567-4569

4567

Chemical Twinning in Zintl Phases† Fabio Zu1 rcher, Steffen Wengert, and Reinhard Nesper* Laboratorium fu¨r Anorganische Chemie, ETH Zu¨rich, Universita¨tstrasse 6, CH-8092 Zu¨rich, Switzerland ReceiVed February 3, 1999 In the systems Ba/Mg/(Si, Ge), two new ternary Zintl phases with the compositions BaMg4Si3 and BaMg4Ge3 were found and structurally characterized. Both compounds are isotypic and crystallize with a new structure type [BaMg4Si3, P4/mmm, Z ) 1, a ) 4.6115(9) Å, c ) 8.615(2) Å; BaMg4Ge3, P4/mmm, Z ) 1, a ) 4.6335(8) Å, c ) 8.746(2) Å]. The anionic partial structure is built of X26- dumbbells and isolated X4- ions (X ) Si, Ge), and the structure can be described according to the Zintl-Klemm-Busmann concept with the formulation (Ba2+)(Mg2+)4[X26-][X4-]. The BaMg4X3 structure can also be described as a result of the fusion of the structures of Mg2X and BaMg2X2. In this regard, BaMg4Si3 and BaMg4Ge3 are very striking examples of chemical twinning.

Introduction

Experimental Section

One of the most important and demanding tasks for a chemist is to ascertain the essential features of structure-property relationships. A very simple structure can be described in several ways. The chemist has to choose the best one, depending on which microscopic feature he wants to point out. For example, rock salt has a very simple structure but it can be described in at least three different ways: as two interpenetrating fcc networks of sodium and chlorine, as an fcc packing of sodiums with the octahedral holes occupied by chlorines and vice versa, and as edge-sharing octahedra of sodium filled with chlorines and vice versa. All descriptions are equivalent, but each one points out a different characteristic of the rock salt structure. The different descriptions should be simple and general; thus, they should show as many relationships as possible to related structures, and they should be useful in explaining physical properties.1 Andersson and Hyde1,2 as well as Parthe´,3 in their pioneering work, have shown that complex structures can be described by combining simple building blocks in a manner that is reminiscent of the twinning of crystals, though on a smaller scale. This approach is called “chemical twinning”1 or intergrowth.3 The building blocks, which are part of the unit cells, are combined according to “twinning laws” as translation, reflection, and rotation.1 We have collected some examples where this simple approach can be used in describing the structures of Zintl phases.4,5 In this work, we will report a very beautiful and illustrative example of “chemical twinning” using the two new Zintl phases BaMg4Si3 and BaMg4Ge3, which crystallize in a novel structure type. The new phase BaMg4X3 extends the hitherto known ternary compounds BaMgX,6,7 BaMg2X2,8,9 Ba5Mg18X13,10 and Ba2Mg3Si411 of the system Ba/Mg/X (X ) Si, Ge) by one other interesting representative.

The compounds were synthesized from the pure elements (Mg pieces, Fluka, 99.8%; Ba rods, Alfa, 99.9%; Si powder, Alfa, 99.99%; Ge lumps, Alfa, 99.9999%), which were sealed under argon atmosphere in niobium ampules and transferred to a furnace under vacuum. BaMg4Si3 decomposes peritectically above 1300 K to Ba5Mg18Si13 and a melt of Mg/Si. Consequently, pure phase material was not produced from stoichiometric amounts of the elements. The maximum yield of crystalline BaMg4Si3 is obtained by cooling a melt of the composition Ba:Mg:Si ) 1:2:4 from 1350 K at 50 K 1 h. The XRD powder pattern indicates the presence of BaSi2, apart from the main product BaMg4Si3. The brittle material has a silvery metallic luster and is sensitive to air and moisture. BaMg4Ge3 decomposes peritectically above 1180 K to Ba5Mg18Ge13 and a melt of Mg/Ge. The highest yield of BaMg4Ge3 is obtained by heating a stoichiometric mixture of the elements up to 1120 K. After the system is cooled at about 200 K/h, a brittle material having a silvery metallic luster is produced. The XRD powder pattern indicates the presence of traces of BaMg2Ge2, apart from the main product BaMg4Ge3. The product is exceptionally sensitive to air and moisture and decomposes in a few seconds to a yellow-orange powder, which probably contains amorphous GeO. The single crystals of BaMg4Si3 and BaMg4Ge3 (black fragments with a metallic luster) were examined on STOE IPSD and STADI4 four-circle diffractometers, respectively, both operating with graphite monochromators and Mo KR radiation. The diffraction data were collected in the angular ranges 5° < 2θ < 50° (oscillation method, φ ) 0-181°, ∆φ ) 1.0°) and 2° < 2θ < 60° (ω-θ scan, 40 steps, ∆ω ) 0.03°), respectively. The diffraction data of BaMg4Ge3 were empirically corrected for absorption (ψ scan). The Laue symmetry is 4/mmm, and there are no systematic extinctions allowing for the space groups P4mm, P422, P4h2m, P4hm2, and P4/mmm. The refinement of the unit cell yielded the following lattice parameters: a ) 4.6115(9) Å, c ) 8.615(2) Å for BaMg4Si3 and a ) 4.6335(8) Å, c ) 8.746(2)

† Dedicated to Prof. Dr. Peter Bo ¨ ttcher on the occasion of his 60th birthday. (1) Andersson, S. Angew. Chem. 1983, 95, 67-79; Angew. Chem., Int. Ed. Engl. 1983, 22, 69-81. (2) Hyde, B. G.; Andersson, S. Inorganic Crystal Structures; John Wiley & Sons: New York, 1963. (3) Parthe´, E.; Chabot, B. in Handbook on the Physics and Chemistry of Rare Earths; Gschneidner, K. A., Eyring, L., Eds.; Elsevier: Amsterdam, 1985; pp 113-334. (4) Wengert, S. Ph.D. Thesis No. 12070, ETH Zu¨rich, 1997.

(5) Zu¨rcher, F. Ph.D. Thesis No. 12546; ETH Zu¨rich, 1998. (6) Eisenmann, B.; Scha¨fer, H.; Weiss, A. Z. Naturforsch. 1970, 25B, 651-652. (7) Eisenmann, B.; Scha¨fer, H.; Weiss, A. Z. Anorg. Allg. Chem. 1972, 391, 241-254. (8) Eisenmann, B.; Scha¨fer, H. Z. Anorg. Allg. Chem. 1974, 403, 163172. (9) Eisenmann, B.; May, N.; Mu¨ller, W.; Scha¨fer, H.; Weiss, A.; Winter, J.; Ziegleder, G. Z. Naturforsch. 1970, 25B, 1350-1352. (10) Wengert, S.; Zu¨rcher, F.; Currao, A.; Nesper, R. Chem.sEur. J., in press. (11) Wengert, S.; Nesper, R. Z. Anorg. Allg. Chem. 1998, 624, 18011806.

10.1021/ic990147v CCC: $18.00 © 1999 American Chemical Society Published on Web 09/15/1999

4568 Inorganic Chemistry, Vol. 38, No. 20, 1999

Zu¨rcher et al.

Table 1. Crystallographic Data for BaMg4Si3 and BaMg4Ge3 chem. formula fw space group a, Å b, Å c, Å cell vol. Å3 Z temp., K wavelength, Å Fcalcd, g‚cm-3 abs coeff, mm-1 reliability factorsa R(Fo) Rw(Fo2) a

BaMg4Si3 318.85 P4/mmm (No. 123) 4.6115(9) 4.6115(9) 8.615(2) 183.21(6) 1 298 0.710 73 2.890 6.135

BaMg4Ge3 452.35 P4/mmm (No. 123) 4.6335(8) 4.6335(8) 8.746(2) 187.77(7) 1 298 0.710 73 4.000 17.282

0.017 0.040

0.022 0.054

Figure 1. Perspective view of the structure of BaMg4X3 (X ) Si, Ge).

R ) ∑||Fo| - |Fc||/∑|Fo|. b Rw(Fo2) ) [∑w(Fo2 - Fc2/∑w(Fo2)]1/2.

Table 2. Wyckoff Sites, Atomic Coordinates, and Equivalent Isotropic Displacement Parameters (Å2) for BaMg4Si3 atom

Wyckoff site

x

y

z

U(iso)

Ba Mg Si(1) Si(2)

1a 4i 1b 2h

0 0 0 1/ 2

0 1/ 2 0 1/ 2

0 0.3176(2) 1/ 2 0.1426(2)

0.0108(4) 0.0121(5) 0.0103(7) 0.0099(5)

Table 3. Selected Interatomic Distances (Å) for BaMg4Si3 Ba-Si(2) Ba-Mg Si(1)-Mg Si(2)-Si(2) Si(2)-Mg Si(2)-Ba

×8 ×8 ×8

3.4847(9) 3.579(2) 2.790(1) 2.458(4) 2.755(2) 3.4847(9)

×4 ×4

Mg-Si(2) Mg-Si(1) Mg-Mg Mg-Mg Mg-Ba

2.755(2) 2.790(1) 3.142(4) 3.2608(6) 3.579(2)

×2 ×2 ×4 ×2

Table 4. Wyckoff Sites, Atomic Coordinates, and Equivalent Isotropic Displacement Parameters (Å2) for BaMg4Ge3 atom

Wyckoff site

x

y

z

U(iso)

Ba Mg Ge(1) Ge(2)

1a 4i 1b 2h

0 0 0 1/ 2

0 1/ 2 0 1/ 2

0 0.3188(2) 1/ 2 0.14723(6)

0.0149(2) 0.0164(4) 0.0134(3) 0.0138(2)

Table 5. Selected Interatomic Distances (Å) for BaMg4Ge3 Ba-Ge(2) Ba-Mg Ge(1)-Mg Ge(2)-Ge(2) Ge(2)-Mg Ge(2)-Ba

3.5204(6) 3.625(1) 2.8070(8) 2.576(1) 2.7602(9) 3.5204(6)

×8 ×8 ×8 ×4 ×4

Mg-Ge(2) Mg-Ge(1) Mg-Mg Mg-Mg Mg-Ba

2.7602(9) 2.8070(8) 3.170(3) 3.2764(6) 3.625(2)

×2 ×2 ×4 ×2

Å for BaMg4Ge3. The structure of BaMg4Si3 was solved in P4/mmm using direct methods and refined by full-matrix least-squares F2. The structure of BaMg4Ge3 was refined in P4/mmm (full-matrix least-squares F2) using the parameters of the isotypic BaMg4Si3. All atoms were anisotropically refined and the displacement parameters are all satisfactory in both structures. The final refined agreement parameters for the BaMg4Si3 and BaMg4Ge3 structures are given in Table 1. Atomic coordinates and selected interatomic distances are listed in Tables 2-5.

Figure 2. Coordination of the Si26- dumbbells (a) and isolated Si4anions (b) in BaMg4Si3.

a distorted square antiprism Ba4Mg4 is formed around the X atoms of the dumbbells. This basic building unit is quite typical for the coordination of terminal silicon or germanium atoms in even more extended Zintl anions found in compounds of the phase systems EA/Mg/(Li)/(Si, Ge).4,5,10,11 At 2.46 and 2.58 Å, the X-X distances are in the range of typical single-bond lengths for silicon and germanium, respectively. The isolated X atoms, formally X4-, are coordinated by eight magnesium atoms, forming a cube (Figure 2b), as in the structure of Mg2X.14-17 Again the strong preference of magnesium for the coordination of highly charged silicon or germanium centers is evident. From a number of investigations, we already know that magnesium acts quite differently on Zintl anions than the heavier alkaline-earth metals Ca, Sr, and Ba. Thus, it is not surprising that, compared to the valence isoelectronic compounds Ba5X3 (Cr5B3 type; X ) Si, Ge),18,19 a novel structure type is realized in BaMg4X3, just because of the different functionalities of the cation types. Although both structures of Ba5X3 and BaMg4X3 are built of X2 dumbbells and isolated X atoms, BaMg4X3 shows a much greater relationship to the structures of BaMg2X2 and Mg2X than to that of Ba5X3. Actually, it is possible to derive the structures of BaMg4X3 just by fusing the structures of BaMg2X2 and Mg2X (Figure 3). The lengths of the tetragonal a axes of BaMg2X2 and BaMg4X3 are nearly identical (4.65 and 4.61 Å for the Si compounds; 4.67 and 4.63 Å for the Ge compounds), and the values for the c axes of BaMg4X3 (8.62 and 8.75 Å observed for the Si and Ge compounds, respectively) calculated

Structure and Discussion BaMg4Si3 and BaMg4Ge3 are isotypic and crystallize within a novel structure type (Figure 1). The anionic partial structure is built of X2 dumbbells and isolated X ions (X ) Si, Ge). According to the Zintl-Klemm-Busmann concept,12,13 BaMg4X3 can be described by the formulation (Ba2+)(Mg2+)4[X26-][X4-]. The dumbbells, formally X26-, show a cation coordination (Figure 2a) comparable to that found in the structure of BaMg2X2 (X ) Si, Ge).8,9 The center of the X-X bond is coordinated by a square of Ba atoms. Together with magnesium,

(12) Klemm, W.; Busmann, E. Z. Anorg. Allg. Chem. 1963, 319, 297311. (13) Scha¨fer, H.; Eisenmann, B.; Mu¨ller, W. Angew. Chem. 1973, 85, 742760; Angew. Chem., Int. Ed. Engl. 1973, 12, 694-712. (14) Bol’shokov, K. A.; Bul’onkov, N. A.; Rastorguev, L. N.; Tsirlin, M. S. Russ. J. Inorg. Chem. (Engl. Transl.) 1963, 8B, 1418-1421. (15) Glazov, V. M.; Glagoleva, N. N. Inorg. Mater. 1965, 1, 989-995. (16) Makarov, E. S.; Muntyonu, S.; Sokolov, E. B.; Slesareva, G. A. Inorg. Mater. 1966, 2, 1830-1833. (17) Grosch, G. H.; Range, K.-J. J. Alloys Compd. 1966, 235, 250-255. (18) Zu¨rcher, F.; Nesper, R. Z. Kristallogr. 1999, 214, 20. (19) Zu¨rcher, F.; Nesper, R. Z. Kristallogr. 1999, 214, 22.

Chemical Twinning in Zintl Phases

Inorganic Chemistry, Vol. 38, No. 20, 1999 4569 (leading to 8.71 and 8.86 Å, respectively) are equal within 0.1 Å to those observed. The discrepancy is due to a slight compression of the Mg2X block along the c axis (a/a′)1.03, compared with 1.0 for cubic Mg2X). Thus, BaMg4X3 is a very nice example of chemical twinning in the sense of the descriptions of Andersson and Hyde,1,2 and Parthe´.3 The “chemical twinning” reported for BaMg4Si3 and BaMg4Ge3 is a very beautiful example of how Nature can form complex structures by combining simple building blocks. The fusion of these building units retains the original distances, and it is possible to calculate the new lattice parameters simply by adding the original lengths of the parent structures. The structure of BaMg4Si3 and BaMg4Ge3 is the almost perfect topological fusing of the structures of Mg2Si and BaMg2Si2 and of Mg2Ge and BaMg2Ge2, respectively. Mg2X and BaMg2X2 can be called the parent structures of BaMg4X3 (X ) Si, Ge), which is therefore the daughter structure. We have shown that the “chemical twinning” approach is very powerful and intuitive and it can be used for predicting new structures.4

Figure 3. The BaMg4X3 structure (X ) Si, Ge) showing chemical twinning. The marked sections of the BaMg2X2 and Mg2X structures (top) fuse together, retaining the original dimensions (middle) and forming the daughter structure BaMg4X3 (bottom).

by adding the lattice parameters of BaMg2X2 and Mg2X according to c(BaMg4X3) ) 1/2a(Mg2X) + 1/2c(BaMg2X2)

Acknowledgment. We thank the Swiss National Science Foundation for generous support under Project No. 2000050675.97. Supporting Information Available: X-ray crystallographic files, in CIF format, for both refined structures. This material is available free of charge via the Internet at http://pubs.acs.org. IC990147V