Comparative Life Cycle Assessment of Advanced Wastewater

Jul 3, 2018 - Environmental Science & Technology ... Cellulose Nanocrystals (CNCs) into the Polyamide Layer of Thin-Film Composite (TFC) Nanofiltratio...
0 downloads 0 Views 765KB Size
Subscriber access provided by NEW MEXICO STATE UNIV

Sustainability Engineering and Green Chemistry

Comparative Life Cycle Assessment of Advanced Wastewater Treatment Processes for Removal of Chemicals of Emerging Concern Sheikh Mokhlesur Rahman, Matthew J. Eckelman, Annalisa Onnis-Hayden, and April Z Gu Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.8b00036 • Publication Date (Web): 03 Jul 2018 Downloaded from http://pubs.acs.org on July 3, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 40

Environmental Science & Technology

1

Comparative Life Cycle Assessment of Advanced

2

Wastewater Treatment Processes for Removal of

3

Chemicals of Emerging Concern

4 5 6 7 8

Sheikh M. Rahman1, Matthew J. Eckelman1*, Annalisa Onnis-Hayden1 and April Z. Gu1† 1

Department of Civil and Environmental Engineering, Northeastern University, 400 Snell Engineering Center, 360 Huntington Ave, Boston, MA 02115, USA

9 10

* Corresponding Author: [email protected], Tel: +1 617 373 4256; Fax: +1 617 373 4419

11



Co-corresponding Author: [email protected], Tel: +1 607-255-2542; Fax: +1 607-255-9004

1 Environment ACS Paragon Plus

Environmental Science & Technology

12

ABSTRACT

13

The potential health effects associated with contaminants of emerging concern (CECs) have

14

motivated regulatory initiatives and deployment of energy- and chemical-intensive advanced

15

treatment processes for their removal. This study evaluates life cycle environmental and health

16

impacts associated with advanced CEC removal processes, encompassing both the benefits of

17

improved effluent quality as well as emissions from upstream activities. A total of 64 treatment

18

configurations were designed and modeled for treating typical U.S. medium-strength wastewater,

19

covering three policy-relevant representative levels of carbon and nutrient removal, with and

20

without additional tertiary CEC removal. The USEtox model was used to calculate

21

characterization factors of several CECs with missing values. Stochastic uncertainty analysis

22

considered variability in influent water quality and uncertainty in CEC toxicity and associated

23

characterization factors. Results show that advanced tertiary treatment can simultaneously reduce

24

nutrients and CECs in effluents to specified limits, but these direct water quality benefits were

25

outweighed by even greater increases in indirect impacts for the toxicity-related metrics, even

26

when considering order-of-magnitude uncertainties for CEC characterization factors. Future

27

work should consider water quality aspects not currently captured in life cycle impact

28

assessment, such as endocrine disruption, in order to evaluate the full policy implications of the

29

CEC removal.

30

KEYWORDS. Contaminants of Emerging Concern, Life Cycle Assessment, Wastewater

31

Treatment, Advanced Tertiary CEC Removal, Tertiary Nutrient Removal.

2 Environment ACS Paragon Plus

Page 2 of 40

Page 3 of 40

32

Environmental Science & Technology

INTRODUCTION

33

Since the mid-1990s, there has been increasing concern that a large number of unregulated

34

yet widely used chemicals pose risks to our ecosystems and human health; such chemicals are

35

referred to as “contaminants of emerging concern” (CECs). These CECs include both new

36

emerging pollutants, such as nano-materials and antibiotic-resistant microbes, and existing

37

chemicals with recently recognized health impacts, such as pharmaceuticals and personal-care

38

products (PPCPs), endocrine-disrupting chemicals (EDCs) and other industrial and commercial

39

compounds.1-3 CECs have been widely detected in the aquatic environment including drinking

40

water systems, wastewaters, surface waters, and groundwaters worldwide.2,4-10 Though CECs are

41

typically found in low concentrations (pico/nano/micro-gram/L levels), these can still be

42

sufficient to cause harmful effects on human, animal, and plant organisms. Indeed, some CECs

43

show no threshold no observed adverse effect level.1,11-13

44

A number of initiatives and regulations have been introduced to address concerns about

45

CECs; specifically, with the trend toward increasing water reuse and recycling, there are

46

substantial efforts on monitoring and regulating CECs.14-16 Following the guidelines of the

47

Unregulated Contaminant Monitoring Rule (UCMR), water utilities monitor and report

48

occurrences of emerging contaminants that are selected by EPA for a 5-year cycle, largely based

49

on the Contaminant Candidate List (CCL) process.17-18 Findings of both the UCMR and EPA’s

50

Endocrine Disruptor Screening Program (EDSP) that tests for endocrine disruptor dose-

51

response,19 along with relevant scientific advancements, may prompt the EPA to adopt new rules

52

and standards regarding CECs.20 To comply with these potential future standards, additional

53

treatment technologies would need to be implemented to reduce CEC concentrations in

54

wastewater effluents.

3 Environment ACS Paragon Plus

Environmental Science & Technology

55

CECs migrate to water bodies though various direct and indirect routes from point and non-

56

point sources. Effluent from wastewater treatment plants (WWTPs) is considered to be one of

57

the major sources, along with agricultural usages and storm runoff.21-24 Subsequently, scientific

58

and engineering challenges exist in developing cost-effective remediation technologies to

59

remove CECs from wastewater in compliance with proposed and future regulatory limits.25

60

Traditional water and wastewater treatment processes are not designed to eliminate most CECs,

61

especially those present at trace levels in drinking water and wastewater.1,26-28 Advanced

62

treatment processes that are considered promising for CEC removal include advanced oxidation

63

(such as UV-H2O2 oxidation and ozonation),29-30 adsorption,31-32 and advanced filtration

64

processes.32-33 Reverse osmosis and UV-H2O2 oxidation processes are energy-intensive, while

65

adsorption and ozonation processes require additional chemicals. Many of these advanced

66

processes are in lab, pilot, or batch treatment scales; and even now the mechanisms of CEC

67

removal in several of these processes are still not well understood.34-35 Although there have been

68

reports exploring quantitative statistical and modeling approaches to estimate CEC removal

69

efficiencies in conventional activated sludge36-37 and membrane bioreactor processes,36 for many

70

CECs there is not yet consensus regarding removal efficiencies in advanced tertiary biological or

71

chemical/physical processes.36-38

72

The very low concentrations of many CECs in wastewater makes treatment processes both

73

costly and technically challenging. Intensive usage of treatment chemicals and energy in

74

advanced CEC removal processes have been associated with increased life cycle toxicity and

75

other environmental impacts.31-33,39 In considering CEC effluent limits and the technologies

76

required to meet these targets, it is appropriate to evaluate the balance between the

77

environmental benefits achieved by CEC removal (e.g., reduced toxicity) and any unintended

4 Environment ACS Paragon Plus

Page 4 of 40

Page 5 of 40

Environmental Science & Technology

78

environmental costs due to additional chemical, energy and materials usage. It is also important

79

to consider these trade-offs at a regional level if possible, rather than on a national or global

80

basis, as local conditions can affect both the quantity of emissions and the health and

81

environmental effects of these emissions.40-41 A quantitative, multi-endpoint consideration of

82

these trade-offs is the central goal of the current study.

83

Life Cycle Assessment (LCA) has been used extensively to characterize and quantify the net

84

environmental impacts of wastewater treatment processes and plants and to compare treatment

85

options.39,42-46 Because the scope of LCA includes both direct emissions from WWTPs as well as

86

indirect emissions from producing and transporting all chemicals, energy, and infrastructure

87

required for treatment, LCA can be applied to study both environmental benefits and costs

88

associated with removing pollutants to meet more stringent regulations. Most studies to date

89

have focused on nutrient removal, while very few studies have focused on CEC removal

90

technologies. One study by Igos et al.39 for hospital wastewater considered treatment of ten

91

pharmaceutical compounds using six different decentralized or centralized WWTP scenarios.

92

The authors concluded that the direct environmental impacts from discharge PPCPs were

93

negligible compared to the life cycle environmental impacts associated with the additional

94

treatment processes required for their removal, implying that treatment leads to a net increase in

95

impacts, rather than a decrease. Wenzel et al.47 found similar results for CEC treatment using

96

ozonation and membrane bioreactors, but found that sand filtration lead to net reductions in

97

overall impacts, due to its less intensive use of energy and treatment chemicals.

98

Several other LCA studies have been conducted on removal of CECs such as PPCPs and

99

EDCs, mostly considering isolated advanced wastewater treatment processes for CEC removal.

100

Most previous quantitative work has reported that the local benefits of CEC removal are small

5 Environment ACS Paragon Plus

Environmental Science & Technology

101

compared to the impacts from the treatment processes, which are often distributed over the life

102

cycle at a regional or global level.48-51 In the few studies that found relatively large benefits from

103

advanced treatment, results were dominated by metals whose removal contributed the most to

104

life cycle benefits, while many organic CECs were omitted due to missing characterization

105

factors.49,51 Due to data gaps and uncertainties in CEC toxicity, some previous studies adopted a

106

qualitative approach to describe possible human and ecotoxicity impact of CECs,52 or focused

107

solely on the impacts from the treatment processes per unit mass of PPCP removal, without

108

considering the benefits.53 With the rising demand for water conservation and water reuse, there

109

is an ongoing need for analysis that compares the life cycle benefits of co-removal of nutrients

110

and CECs across different process configurations as advanced tertiary technologies develop and

111

achieve wider implementation.

112

Here we report life cycle environmental and health impact results for CEC removal

113

technologies utilizing a variety of advanced processes designed for both nutrient and CECs

114

removal in different plant configurations. This new analysis builds on the LCA work noted

115

above while expanding to cover a wide range of target substances and treatment processes,

116

including conservative ecotoxicity estimates for all CECs, and addressing uncertainty through a

117

multi-tiered analysis. Secondary biological and tertiary nutrient removal processes were selected

118

to achieve three different representative levels of nutrient removal for municipal wastewater,

119

coupled with processes for CEC removal, in order to achieve targets that have been proposed in

120

recent policy discussions.54-55 Net life cycle environmental and health impacts of treatment are

121

evaluated with a focus on human toxicity and ecotoxicity, as the primary motivations for CEC

122

removal, but also including impact categories of eutrophication, acidification, and global

123

warming.

6 Environment ACS Paragon Plus

Page 6 of 40

Page 7 of 40

Environmental Science & Technology

124

This work builds on our previous assessment of tertiary treatment processes for nutrient

125

removal,45 which combined wastewater process simulation results with LCA, revealing large

126

increases in global warming and ozone depletion associated with more stringent effluent

127

standards, and even an increase in life cycle eutrophication for RO tertiary treatment processes,

128

for which indirect impacts overwhelmed the direct water quality benefits of reduced nutrient

129

concentrations in effluent. Our previous work focused on reduced nutrient loading, but not the

130

effects of micropollutants or any additional treatment that might be required for their removal. In

131

this study, we focus on life cycle impacts and benefits associated with CEC removal, extending

132

preliminary work56 while updating models to include new life cycle inventory data and

133

characterization factors and uncertainty analysis, leading to improved representativeness and

134

interpretability of the LCA results.

135 136

METHODS

137

Selection of CECs and Their Concentrations in Wastewater

138

Among the CECs identified in the literature,2,5,7-8,10,32 35 CECs are selected for the current

139

study that are present in at least 50% of reported plants surveyed or monitored, with a preference

140

for CECs with available information on degradation, transformation, and removal during the

141

treatment processes. This set includes 19 pharmaceuticals and personal care products (PPCPs), 2

142

pesticides, 4 natural and/or synthetic hormones, and 11 industrial and commercial chemicals

143

(ICCs). Concentrations of CECs in secondary effluent vary widely, ranging between 10 ng/L and

144

3250 ng/L. The medians of the reported concentrations are used in the present study as influent

145

levels feeding to the tertiary CEC removal processes and listed in Table 1 along with the

146

minimum and maximum of the reported values. The CEC concentrations reported here are

7 Environment ACS Paragon Plus

Environmental Science & Technology

147

representative of the typical occurrence data in the US wastewater, and do not apply to any

148

specific site. Spatial and temporal variations in CEC concentrations across the country can occur

149

from different CEC production rate and consumption practices, water consumption, capacity of

150

WWTPs, persistence and metabolism of CECs, as well as climatic conditions such as

151

temperature and rainfall.4 For example, recorded high concentrations of specific CECs in densely

152

populated areas reflect the influence of factors such as population density, food and drug

153

consumption habits, and land use patterns.4,57

154 155

Treatment Plant Design Alternatives

156

When implemented, CEC treatment processes typically follow advanced schemes for nutrient

157

removal.22 Hence, combining both nutrient removal and CEC removal processes may be

158

necessary to understand the comprehensive environmental costs and benefits of more stringent

159

limits for treatment plants. With that in focus, treatment configurations designed for the current

160

study include secondary biological processes targeting three different effluent nutrient limits

161

(Level 1: TN = 8 mg/L, TP = 1 mg/L; Level 2: TN = 3 mg/L, TP = 0.1 mg/L; Level 3: TN = 1

162

mg/L, TP = 0.01 mg/L,55 details in Table S1), and both with and without additional CEC

163

removal processes.

164

The designs of the treatment alternatives are based on 10 MGD (37,854 m3/d) influent flow

165

with typical US domestic wastewater characteristics (TN = 35 mg/L and TP = 8 mg/L, details in

166

Table S2 and variations considered in the uncertainty analysis) and typical design life of 20

167

years, following previous studies.43,58-60 As 20-50 years are common lifespans of wastewater

168

treatment plants, the selection of 20 years as the design life represents a conservative assumption.

169

In addition to two conventional biological nutrient removal (BNR) processes (5 stage Bardenpho

8 Environment ACS Paragon Plus

Page 8 of 40

Page 9 of 40

Environmental Science & Technology

170

and University of Cape Town (UCT)), external carbon addition is considered for additional

171

denitrification for both Level 2 and Level 3 treatment scenarios.61-62 Four commonly used

172

tertiary processes—including ballasted sedimentation, traditional filtration, filtration with

173

continuous backwash, and membrane filtration technologies—are selected for higher-level

174

phosphorus removal. Several studies have demonstrated that application of tertiary processes in

175

multiple stages with external carbon addition may achieve target TN and TP concentrations,63-66

176

assuming reliable and stable operation of the treatment plants.55 Furthermore, four advanced

177

tertiary processes are evaluated as CEC removal processes and they are ozonation, UV-H2O2

178

oxidation, reverse osmosis, and activated carbon adsorption processes.

179

In total, there are eight scenarios for Level 1 treatment (including six with CEC removal), 30

180

scenarios for Level 2 treatment (including 24 with CEC removal), and 26 scenarios for Level 3

181

treatment (including 20 with CEC removal). A breakdown of treatment configurations is

182

provided in Figure 1 with details in Table S3. In-house spreadsheet models for preliminary

183

treatment coupled with BioWin simulations (EnviroSim, Hamilton, ON) are used to finalize the

184

reactor design including sizes, solids retention time (SRT), chemical and O2 requirements of the

185

BNR processes for nutrient removal. The materials, energy, and chemical requirements of the

186

BNR reactors are kept static for the subsequent uncertainty analyses. The total SRT for all the

187

treatment scenarios is set to 10 days, which is in line with the usual operating condition of a

188

BNR process.58,67

189

Process configuration and design parameters such as chemical dose, energy use, and P

190

removal rate of the tertiary nutrient removal processes are determined based on Manual of

191

Practice (MoP) and previous literature (Table S4 and S5).45,54,61,68-69 For the adsorption process,

192

granular activated carbon (GAC) is assumed with regeneration from spent media (see Tables S4

9 Environment ACS Paragon Plus

Environmental Science & Technology

193

and S6). Rejected brine from the RO process, which also includes the CECs removed during

194

treatment, is assumed to be directly disposed to the sea without any further treatment (see Tables

195

S4 and S7).

196

Different CECs categories exhibit various levels of susceptibility to and removal efficiency

197

from the various wastewater treatment processes. CEC removal efficiency in the treatment

198

process depends on several factors including operating chemical dose, contact time,

199

biotransformation, mixture effects, and variations in flow and temperature.4,70-71 Water quality

200

parameters such as dissolved organic carbon (DOC) also affect the CEC removal efficiencies,

201

chemical doses, and energy use in the CEC treatment processes.72 However, due to the lack of

202

mechanistic understanding and quantitative models for predicting the DOC level associated with

203

different levels of nutrient removal, we did not consider the influence of DOC in our analysis,

204

instead used ranges for removal efficiency to account for uncertainty in influent wastewater

205

quality generally. The CEC removal efficiencies for each advanced tertiary treatment processes

206

are selected as the median of the reported values collected from literature, which represent

207

typical operating conditions, rather than the full range of variability that might be seen in actual

208

treatment plants. CEC removal efficiencies and chemical and energy usage by ozonation, UV-

209

H2O2 oxidation, RO membrane filtration, and activated carbon adsorption processes are gathered

210

from available literature of pilot or lab-scale studies and are summarized in Table 1 and Table

211

S4.8,10,32,39,73-74 Despite a thorough review and a preference for well-studied compounds, removal

212

rates of several CECs are still missing. For these CECs and treatment processes, rates are

213

assumed as the median of the removal rates available for those CECs with available data, as

214

noted in Table 1.

10 Environment ACS Paragon Plus

Page 10 of 40

Page 11 of 40

Environmental Science & Technology

215

Considering sludge management, life cycle impacts of the sludge treatment and disposal are

216

often small compared to the liquid stream treatment, and can vary widely depending on the

217

selected treatment and disposal units.45,75-77 Therefore, this analysis considers the single

218

configuration of sludge treatment and solids handling processes that include gravity thickener,

219

anaerobic digestion, and disposal to a sanitary landfill, including fugitive emissions (Text S1,

220

Table S13, Table S14).

221 222

Life Cycle Assessment

223

LCA modeling is based on a functional unit of 1 m3 of influent wastewater. The system

224

boundary considers both liquid and solids streams of the treatment facilities including influent

225

distribution through different treatment processes, treatment processes, sludge management, and

226

final effluent discharge, following previous work.45,78 Life cycle inventory data were assembled

227

for plant operation (chemicals, energy) from process simulations and for plant construction

228

(steel, concrete) from sizing of the various units. Direct emissions of CO2, CH4 and N2O from

229

secondary biological processes are estimated following an EPA method that models CO2 and

230

CH4 based on the stoichiometry of degradation of organic compounds in biological processes

231

and N2O from the nitrification-denitrification stoichiometry.79 Fugitive emissions are estimated

232

based on the annual average influent properties and static operating conditions, though they may

233

be dependent on various dynamic factors including influent characteristics (BOD and nutrient

234

concentrations), and operating conditions (temperature, pH, dissolved oxygen, SRTs, reactor

235

types).80-82 The estimated direct CO2 emission from the treatment processes are considered to be

236

biogenic CO2, following IPCC guidelines for WWTPs,83 and has no impact on the global

11 Environment ACS Paragon Plus

Environmental Science & Technology

237

warming potential estimation. For tertiary nutrient and CEC removal processes, operating

238

energy, and chemical requirement are obtained from literature.32,39,68-69,84

239

All material and energy inputs are summarized in Tables S4-S5. Inventory data are matched

240

with unit processes (Table S8) from the US-EI LCI database (Earthshift, Huntington, VT), which

241

includes modified unit process data from the ecoinvent LCI database adjusted for U.S. energy

242

inputs and compiled in the SimaPro 8.1 software package (PRé Consultants, Amersfoort,

243

Netherlands).

244

Life cycle impacts of all emissions were assessed using the Tool for the Reduction and

245

Assessment of Chemical and Other Environmental impacts (TRACI 2.1) impact assessment

246

method, developed by the USEPA.40-41 The impact categories of eutrophication, acidification,

247

global warming, ozone depletion, ecotoxicity, and human health—carcinogenic and

248

non-carcinogenic—were selected for the current study, as these represent the water quality,

249

global emissions, and human health concerns most frequently included in wastewater treatment

250

LCAs. Table S9 presents the selected impact categories with a description of their estimation

251

approach and reference substances. Ecotoxicity and human health toxicity in TRACI 2.1 model

252

are estimated using the UNEP-SETAC consensus toxicity model USEtox.85 For the CECs

253

disposed with the effluent, the freshwater emission compartment of the USEtox model is

254

assumed for calculation of the fate factor. USEtox considers the exposure routes of direct

255

inhalation and ingestion of drinking water, as well as ingestion of foods where pollutants may

256

have bioaccumulated. (Potential CEC removal during drinking water treatment is not considered

257

in the model.) Of the 35 CECs considered, some had existing characterization factors (CFs) for

258

ecotoxicity and human health endpoints pre-run in USEtox or derived by Alfonsín et al. for

259

PPCPs.85-87 CECs with missing CFs were evaluated in the USEtox model using input values for

12 Environment ACS Paragon Plus

Page 12 of 40

Page 13 of 40

Environmental Science & Technology

260

physical/chemical properties and toxicity results from EPA’s EPISuite™ model.88 Table S10

261

presents the USEtox input parameter values for 10 CECs that were evaluated in this manner,

262

while Table S11 presents all USEtox CFs by data source. Only three CECs (o-hydroxy

263

atorvastatin, p-hydroxy atorvastatin, and TCEP) were unable to be evaluated for all three

264

endpoints (ecotoxicity, human health cancer, and human health non-cancer toxicity). Where no

265

toxicity data were available, CFs are set to the median of the CFs available for other CECs. The

266

median values are 5.7×103 CTUe for the ecotoxicity, 2.5×10-8 CTUh for the cancer related

267

human health toxicity, and 2.6×10-6 CTUh for non-carcinogen human health toxicity.

268

Additionally, the toxicity characterization factors of most of the brine ions are not available in

269

the USEtox model, and were collected from the Zhou et al. study.89 The seawater emission

270

compartment of the USEtox model is selected to characterize the toxicity of the CECs disposed

271

along with the brine (Table S11).

272 273

Uncertainty Analysis

274

Uncertainty analysis has been conducted to analyze the effects of variation in influent

275

wastewater quality, chemical and energy use in tertiary processes, CEC concentrations in

276

wastewater, and removal rates of CECs in advanced tertiary processes, using two sets of Monte

277

Carlo simulations. First, we have considered variability in the influent carbon to phosphorus

278

(C/P) ratio (since influent C/P ratio can have noteworthy effect on nutrient removal)90 together

279

with variations in chemical and energy use in the tertiary processes. Since a low C/P ratio

280

reduces P removal efficiency,90 influent C/P ratios ranging from 15 mg/mg to 25 mg/mg are

281

considered by adding COD, where acetate is used as the external carbon source. Ranges for

282

chemical and energy inputs of the tertiary processes, reported in the literature, are used to create

13 Environment ACS Paragon Plus

Environmental Science & Technology

283

uniform probability distributions (Table S12). Direct inputs in the BNR processes are kept static.

284

A 10,000 run Monte Carlo simulation is conducted in SimaPro for both these direct inputs as

285

well as existing log-normal distributions of all indirect inputs and emissions (background

286

processes in the LCI).

287

Second, we have investigated the possible changes in the benefits associated with reduction

288

of direct CEC emissions by varying the CECs concentrations, removal efficiencies, and toxicity

289

CFs. Though nutrient removal process designs are well established, advanced tertiary processes

290

for both nutrient and CEC removal still exist only at the pilot scale or limited full-scale, and so

291

have less robust data. A relatively wide range of CECs concentrations in wastewater and their

292

removal efficiencies in the CEC removal processes are reported in the literature. CEC

293

concentrations and removal efficiencies are considered to vary uniformly for the Monte Carlo

294

simulations, within the ranges listed in Table 1. Toxicity CFs are among the most uncertain

295

among impact categories. Rosenbaum et al. provided guidance for CFs estimated by the USEtox

296

method, with uncertainty of 1-2 orders of magnitude variation for the ecotoxicity and 2-3 orders

297

of magnitude for the human health impacts.85 Accordingly, we apply a standard variation of 0.01

298

to 100 times of the base values of the characterization factors for the ecotoxicity and 0.001 to

299

1000 times of the base values for the human health toxicity to run the Monte-Carlo simulation

300

with 100,000 iterations, which is conducted in MATLAB 2015b (Mathworks, Natick, MA).

301

14 Environment ACS Paragon Plus

Page 14 of 40

Page 15 of 40

Environmental Science & Technology

302

RESULTS AND DISCUSSION

303

Life Cycle Assessment

304

Life cycle impacts for ecotoxicity and human toxicity (carcinogenic and non-carcinogenic)

305

are presented in Figure 2 for all treatment scenarios. As expected, reduction of CECs in the

306

effluent due to advanced tertiary treatment leads to reduced direct environmental and health

307

impacts. However, these reductions can hardly be seen as life cycle toxicity is completely

308

dominated for all three impact categories by indirect emissions from upstream production of

309

chemicals, energy, and (to a lesser extent) construction materials. This means that although

310

advanced tertiary processes reduce the CECs concentration in the effluent locally, their

311

implementation may in fact lead to net increases in life cycle toxicity overall.

312

Figure 3 isolates just the CEC removal processes in order to visualize the benefits of

313

reducing CECs in WWTP effluent versus the additional toxicity impacts from upstream

314

emissions. Contributions of CEC removal to life cycle human toxicity are essentially negligible

315

(