Comprehensive Lipidome-Wide Profiling Reveals Dynamic Changes

Oct 23, 2017 - As important biomolecules in Camellia sinensis L., lipids undergo substantial changes during black tea manufacture, which is considered...
8 downloads 10 Views 3MB Size
Subscriber access provided by United Arab Emirates University | Libraries Deanship

Article

Comprehensive lipidome-wide profiling reveals dynamic changes of tea lipids during manufacturing process of black tea Jia Li, Jinjie Hua, Qinghua Zhou, Chunwang Dong, Jinjin Wang, Yuliang Deng, Haibo Yuan, and Yongwen Jiang J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.7b03875 • Publication Date (Web): 23 Oct 2017 Downloaded from http://pubs.acs.org on October 24, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 41

Journal of Agricultural and Food Chemistry

Comprehensive lipidome-wide profiling reveals dynamic changes of tea lipids during manufacturing process of black tea

Jia Lia, Jinjie Huaa, Qinghua Zhoub, Chunwang Donga, Jinjin Wanga, Yuliang Denga, Haibo Yuana*, Yongwen Jianga*

a

Key Laboratory of Tea Biology and Resources Utilization, Ministry of Agriculture,

Tea Research Institute, Chinese Academy of Agricultural Sciences, Hangzhou 310008, China b

College of Environment, Zhejiang University of Technology, Hangzhou 310014,

China

* Correspondence should be addressed to: Prof. Yongwen Jiang, Email: [email protected] Prof. Haibo Yuan, Email: [email protected]

1

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

1

Page 2 of 41

Abstract

2

As important biomolecules in Camellia sinensis L., lipids undergo substantial

3

changes during black tea manufacture, which is considered to contribute to tea

4

sensory quality. However, limited by analytical capacity, detailed lipid composition

5

and its dynamic changes during black tea manufacture, remain unclear. Herein, we

6

performed tea lipidome profiling using high resolution liquid chromatography

7

coupled to mass spectrometry (LC-MS), which allows simultaneous and robust

8

analysis of 192 individual lipid species in black tea, covering 17 (sub)classes.

9

Furthermore, dynamic changes of tea lipids during black tea manufacture were

10

investigated. Significant alterations of lipid pattern were revealed, involved with

11

chlorophylls degradation, metabolic pathways of glycoglycerolipids and other

12

extraplastidial membrane lipids. To our knowledge, this report presented most

13

comprehensive coverage of lipid species in black tea. This study provides a global and

14

in-depth metabolic map of tea lipidome during black tea manufacture.

15 16

Keywords: black tea, manufacturing process, lipid profiling, dynamic changes, LC-

17

MS

18

2

ACS Paragon Plus Environment

Page 3 of 41

Journal of Agricultural and Food Chemistry

19

Introduction

20

Tea is most widely consumed flavored beverage all over the world1, which is

21

prepared from fresh leaves of Camellia sinensis L. by complicated plucking and

22

manufacturing process. Among all tea types, black tea is most prevalent due to its

23

pleasant sensory quality (aroma, taste, color) and beneficial health effect2-3,

24

accounting for approximately 78% of global tea consumption4. The post-harvest

25

procedure of orthodox black tea manufacture includes delicate steps of withering,

26

rolling, fermentation and drying. Massive evidence has shown that substantial

27

changes take place during the manufacturing process of black tea in aspect of its non-

28

volatile and volatile compounds, which setup important basis for the development of

29

unique sensory quality of black tea1, 5. Tea flavanols (catechins) and their oxidation

30

products, e.g. theaflavins, thearubigins, as well as flavonol glycosides, amino acids

31

and alkaloids have been extensively studied6-8. However, previous studies mainly

32

focus on water-soluble components, the knowledge of hydrophobic components in

33

black tea is still limited.

34

Lipids, broadly defined as hydrophobic biomolecules9, are essential constitutes in

35

plants. Increasing studies have revealed versatile roles of lipid in plants including

36

membrane structural scaffold, energy storage unit and vital player in various

37

biological processes, such as signaling and photosynthesis10-11. Interestingly, lipids are

38

as well reported to be implicated in sensory quality of black tea. Hydrophobic

39

chlorophylls are major pigments of fresh tea leaves, whose metabolic products

40

generated during manufacturing contribute to the unique color of black tea1. Volatiles

41

of aliphatic alcohols, aldehydes and lactones responsible for the “fresh” odor of tea

42

aroma, are fatty acid derivatives generated from lipid oxidation5,

43

degradation also produces fragrant volatiles such as methyl jasmonate, cis-jasmone,

12-13

. Lipid

3

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 4 of 41

44

which contribute to sweet and floral odor of black tea5, 13-14. These odor compounds

45

are mainly generated during tea manufacturing process. It is essential, therefore, to

46

reveal the detailed lipid composition of black tea and its dynamic alterations and

47

transformations during manufacturing process.

48

Several studies have been reported of tea lipids in this context. Ravichandran et al.

49

and Bhuyan et al. investigated neutral lipids, glycolipids, phospholipids and their fatty

50

acid (FA) compositions in different manufacture stages of black tea, by applying

51

column fractionation followed by gas chromatography-FID analysis15-16. Considerable

52

variation of FA composition was reported during black tea manufacture and

53

glycolipids were found to be most pronouncedly degraded15-16. Difference in lipid

54

degradation was identified as possible reason of superior aroma of orthodox over CTC

55

black tea16. However, limited by sensitivity and specificity of employed methods,

56

previous studies were performed on the scale of lipid category and only covered a few

57

number of lipid classes, which hampers broader and in-depth insights into tea lipids

58

and their metabolic fates during manufacture, and moreover, their role in tea sensory

59

characteristics.

60

Lipidome profiling or lipidomics, is an emerging analytical strategy that enables

61

qualitative and quantitative analysis of a wide range of lipids on the scale of

62

individual lipid molecular species, thus providing a global map of “lipidome” and its

63

metabolism17-19. The promising perspectives of lipidomics tool in plant field has been

64

highlighted in recent years by increasing applications in model plant Arabidopsis and

65

crops such as rice and tobacco20-24. However, to our knowledge, by far there is no

66

study reported for an improved characterization of tea lipids and its “metabolism”

67

during manufacturing process. In this study, we performed comprehensive tea lipid

68

profiling by using ultra-performance liquid chromatography coupled to mass 4

ACS Paragon Plus Environment

Page 5 of 41

Journal of Agricultural and Food Chemistry

69

spectrometry (UPLC-MS), which allows simultaneous analysis of 192 individual lipid

70

species in black tea. Furthermore, in combination with uni-/multi-multivariate

71

statistics, this approach has been applied in investigation of dynamic changes of tea

72

lipids and elucidation of altered metabolic pathways during black tea manufacture.

73 74

Materials and Methods

75

Chemicals and Regents

76

Acetonitrile, isopropanol and methanol of liquid chromatography or mass

77

spectrometry grade were purchased from Merck (Darnstadt, Germany). Ammonium

78

acetate and methyl tert-butyl ether (MTBE) were purchased from Sigma-Aldrich (St.

79

Louis, MO, USA).

80

Sample Preparation

81

Fresh tea leaves (one bud with one or two leaves) of Chinese tea variety C.

82

sinensis cv. Chuyeqi were harvested in August from Gaoqiao tea garden, Tea Research

83

Institute of Hunan Province, Changsha, China. Tea leaves were withered for 20 hours

84

until the moisture content of tea leaves was decreased to around 62%-64% (wet basis,

85

w.b.). Withering temperature, light intensity and relative humidity were set to be

86

28°C, 6000 lx and 70%, respectively. Next, tea leaves were subjected to rolling using

87

a roller (6CR-25, Shangyang Machinery Co. Ltd., China), followed by fermentation

88

for four hours with temperature and relative humidity of 30°C and 95%, respectively.

89

Both withering and fermentation steps were carried out using an artificial climate

90

chamber (PRX-450D, Saifu Experiment Instrument Co. Ltd., China). Afterwards,

91

tea leaves were dried using a hot air drier (JY-6CHZ-7B, Jiayou Machinery Co.

92

Ltd., China) until about 5% of moisture content was reached. The experiment was

93

carried out in triplicates (each 6 kg of fresh leaves). Tea samples for analysis were 5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 6 of 41

94

collected after harvest (fresh leaves), at withering time of 4h, 8h, 12h, 16h, 20h, after

95

rolling, at fermentation time of 1h, 2h, 3h, 4h and after drying. In total, 36 tea samples

96

were collected. All samples were freeze-dried and stored in -80°C before analysis.

97

Tea Lipid Extraction

98

Tea lipids were extracted according to the previous report with minor

99

modifications25. Briefly, 300 µL methanol, followed by 1 mL MTBE, was added to 20

100

mg grounded tea powder. After one-hour vortex, 300 µL ultrapure water was added to

101

produce two phases. The upper phase, i.e., MTBE phase, where hydrophobic

102

metabolites were retained, was collected after centrifugation and freeze-dried. Each

103

tea sample was extracted in two replicates. Tea lipid extracts were stored in -80°C for

104

analysis.

105

LC-MS Analysis

106

LC-MS based tea lipid profiling was performed by an ultra-performance liquid

107

chromatography coupled to an electrospray ionization-quadrupole time-of-flight mass

108

spectrometer system (UPLC-ESI-q-TOF, Xevo G2-S, Waters), adopted from previous

109

method26. Briefly, tea lipid extracts were separated using an ACQUITY UPLC HSS

110

T3 column (2.1×100 mm, 1.8 µm, Waters). Gradient elution was started with 32%

111

solvent B (isopropanol: acetonitrile = 9:1, 10 mM ammonium acetate) and 68%

112

solvent A (acetonitrile: water = 6:4, 10 mM ammonium acetate), which was

113

maintained for 2 min, followed by linear increase to 60% B in next 2 min. Solvent B

114

was further linearly increased to 97% during next 9 min and maintained for 4 min.

115

Subsequently solvent B was decreased to 32% in 0.1 min and equilibrated for 2.9 min

116

for next injection. Total run time was 20 min. Data was acquired in ESI positive mode

117

with scan mass range of 200-1200. ESI settings of capillary voltage, source

118

temperature and desolvation temperature were 3 kV, 120°C and 450°C, respectively. 6

ACS Paragon Plus Environment

Page 7 of 41

Journal of Agricultural and Food Chemistry

119

Cone gas flow and desolvation gas flow were set to be 50 L/min and 800 L/min,

120

respectively. Online mass calibration was performed throughout the analysis by

121

applying lockspray using reference compound leucine-encephalin with m/z of

122

556.2771. High resolution data-dependent MS/MS was performed by HCD with

123

collisional energy of 30 ev in ESI(+) using UPLC-quadrupole Orbitrap mass

124

spectrometer (Q Exactive, Thermo). Quality control (QC) samples were prepared

125

from pooled sample and analyzed every 8 injections during the whole run.

126

Data Processing and Statistics

127

Acquired LC-MS data was processed using software TransOmics Informatics for

128

Metabolomics and Lipidomics (Waters) for feature extraction and time alignment. A

129

signal-to-noise ratio of 3 was set as sensitivity level for feature extraction. A peak list

130

was generated including retention time (RT), m/z and peak intensity of detected ions.

131

Relative intensity was calculated by normalization to total intensity of all ions in each

132

sample. It is noteworthy that normalized intensity is relative abundance, not actual

133

abundance of lipids. Missing values were removed by applying 80% rule27. Lipid ions

134

with relative standard deviation (RSD) less than 30% in all QCs were retained for

135

further analysis. Principal component analysis (PCA) and partial least square-

136

discriminate analysis (PLS-DA) were performed by SIMCA-P 11.5 (Umetrics AB,

137

Umeå, Sweden) with pareto scaling28. Heatmap visualization was conducted by using

138

open source tool MultiExperiment Viewer (version 4.9.0)29. Statistical significance

139

was determined by one-way ANOVA with adjusted bonferroni correction for false

140

discovery rate (FDR).

141

Lipid Nomenclature

142

Lipid annotation throughout this manuscript follows the lipid nomenclature

143

system proposed by LIPID MAPS9. Sphingolipid species are denoted by long-chain 7

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 8 of 41

144

base and fatty amide. t18:0, hydroxysphinganine (phytosphingosine); t18:1,

145

hydroxysphingosine; d18:2, sphingadienine; h in fatty amide indicates hydroxyl.

146

Phosphoglycerolipids and acylglycerolipids are denoted by summed carbon number:

147

total double bond of all fatty chains. Glycoglycerolipids are denoted by two fatty acyl

148

groups (not indicative of stereospecificity).

149 150

Results and Discussion

151

Comprehensive profiling of tea lipidome using UPLC-Q-TOF

152

The potential complexity and diversity of lipids in fresh tea leaves and in tea

153

product after manufacturing process, requires a potent tea lipid profiling method with

154

a broad coverage of lipid classes/species, as well as high structural specificity. To this

155

end, we developed an UPLC-Q-TOF based approach for wide-scale profiling of tea

156

lipids. An efficient chromatographic separation of tea lipids was achieved in 15

157

minutes by gradient elution (Figure 1). Polar lyso-phosphoglycerolipids elute earlier

158

in about RT of 2.3-4.3 min, whereas neutral lipids including sterol lipids and

159

triacylglycerols elute later in around RT of 9.3-13.6 min. Membrane lipids including

160

phospho-/glyco-glycerolipids, sphingolipids, and other lipids elute in the RT range of

161

5.3-10.8 min. A total of more than 1000 ion features were profiled in non-targeted

162

pattern, spanning approximately 5 orders of magnitude in their peak intensities.

163

To ensure the reliability and robustness of tea lipid profiling procedure, QC

164

samples (n=11) and extraction replicates (n=2) were carefully evaluated (Figure 2).

165

Figure 2A shows the distribution of coefficient of variation (CV) of all detected ion

166

features in 11 QC samples. Lipid ions with CVs lower than 10% accounted for about

167

70% of overall abundance, and this number increased to about 90% for lipid ions with

168

CVs lower than 20%. Furthermore, parallel tea lipid extractions also demonstrated 8

ACS Paragon Plus Environment

Page 9 of 41

Journal of Agricultural and Food Chemistry

169

high precision, as reflected by high coefficient of R2=0.99 for two extraction

170

replicates (Figure 2B). This result is satisfying for complex plant tissue samples.

171

Identification of lipid species in black tea

172

To unravel the lipid composition in black tea, pooled tea sample prepared from

173

each manufacturing stage was used for lipid identity assignment, aimed to cover not

174

only naturally-occurring lipids in fresh tea leaves but also lipid metabolites produced

175

during manufacturing process. To constrain false-positive assignments, three aspects

176

were concerned to minimize possible error-prone interference from isobaric or

177

isoelemental compounds. Firstly, accurate mass measurement (