Continuous Bulk FeCuC Aerogel with Ultradispersed Metal

Apr 15, 2016 - CO2 and N2 in environmentally friendly way. The activated FeCuC aerogel was applied in a heterogeneous electro-Fenton (EF) process and ...
0 downloads 0 Views 2MB Size
Subscriber access provided by SUNY DOWNSTATE

Article

Continuous bulk FeCuC aerogel with ultradispersed metal nanoparticles: An efficient 3D heterogeneous electro-Fenton cathode over a wide range of pH 3–9 Hongying Zhao, Lin Qian, Xiaohong Guan, Deli Wu, and Guohua Zhao Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b00265 • Publication Date (Web): 15 Apr 2016 Downloaded from http://pubs.acs.org on April 24, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 33

Environmental Science & Technology

1

Continuous bulk FeCuC

aerogel with ultradispersed metal

2

nanoparticles: An efficient 3D heterogeneous electro-Fenton cathode

3

over a wide range of pH 3–9

4 5

Hongying Zhao,a Lin Qian,a Xiaohong Guan,b Deli Wu,b and Guohua Zhao*a

6 7 8 9 10 11 12

a

13

Sustainability, Tongji University, Shanghai, 200092, China.

14

b

15

Environmental Science and Engineering, Tongji University, Shanghai 200092, China.

Department of Chemistry, Shanghai Key Lab of Chemical Assessment and

State Key Laboratory of Pollution Control and Resources Reuse, College of

16

1

ACS Paragon Plus Environment

Environmental Science & Technology

17

Abstract

18

Novel iron–copper–carbon (FeCuC) aerogel was fabricated through a one-step

19

process from metal-resin precursors and then activated with CO2 and N2 in

20

environmentally friendly way. The activated FeCuC aerogel was applied in a

21

heterogeneous electro-Fenton (EF) process and exhibited higher mineralization

22

efficiency than homogeneous EF technology. High total organic carbon (TOC)

23

removal of organic pollutants with activated FeCuC aerogel was achieved at a

24

wide range of pH values (3‒9). The chemical oxygen demand (COD) of real

25

dyeing wastewater was below China’s discharge standard after 30 min of

26

treatment, and the specific energy consumption was low (9.2 kW·h·kg-1COD-1),

27

corresponding to a power consumption of only ~0.34 kW·h per ton of wastewater.

28

The enhanced mineralization efficiency of FeCuC aerogel was mostly attributable

29

to ultradispersed metallic Fe-Cu nanoparticles embedded in 3D carbon matrix and

30

the CO2–N2 treatment. The CO2 activation enhanced the accessibility of the

31

aerogel’s pores, and the secondary N2 activation enlarged the porosity and

32

regenerated the ultradispersed zero-valent iron (Fe0) with reductive carbon. Cu0

33

acted as a reduction promoter for interfacial electron transfer. Moreover, activated

34

FeCuC aerogel presented low iron leaching (