Continuous Manufacturing of Cocrystals Using Solid State Shear

Mar 13, 2018 - The State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, China ... S3M Design. The S3M (SI 1, Figure 1) ...
8 downloads 9 Views 2MB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

Continuous Manufacturing of Cocrystals using Solid State Shear Milling Technology Sachin Korde, Sudhir K. Pagire, He Pan, Colin C. Seaton, Adrian L. Kelly, Yinghong Chen, Qi Wang, Phil D. Coates, and Anant Paradkar Cryst. Growth Des., Just Accepted Manuscript • DOI: 10.1021/acs.cgd.7b01733 • Publication Date (Web): 13 Mar 2018 Downloaded from http://pubs.acs.org on March 14, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Crystal Growth & Design

1

Continuous Manufacturing of Cocrystals using Solid State Shear Milling

2

Technology

3

AUTHOR NAMES

4

Korde, Sachin1,2; Pagire, Sudhir1,2; Pan, He5; Seaton, Colin4; Kelly, Adrian1,3; Chen,

5

Yinghong5; Wang, Qi5; Coates, Phil3; Paradkar, Anant1,2*

6 7 8

AUTHOR ADDRESS

9

1. Centre for Pharmaceutical Engineering Science, University of Bradford, Bradford, UK.

10

2. School of Pharmacy, University of Bradford, Bradford, UK

11

3. Polymer IRC, Faculty of Engineering and Informatics, University of Bradford, UK

12

4. School of Chemistry and Biosciences, University of Bradford, Bradford, BD7 1DP.

13

5. The State Key Laboratory of Polymer Materials Engineering, Sichuan University,

14

Chengdu, China

15

ABSTRACT

16

Solid State Shear Milling (S3M) is reported as a scalable, continuous, polymer-assisted

17

cocrystallisation technique. A specially designed milling pan was employed to provide high

18

levels of applied shear and the addition of polymeric processing aid enabled generation of

19

high stress fields. Carbamazepine – salicylic acid cocrystals were produced with 5% - 25wt%

20

of Polyethylene Oxide (PEO). A systematic study was carried out to understand the effect of

21

process variables on properties and performance of the cocrystals. S3M offers an important

22

new route for continuous manufacturing of pharmaceutical cocrystals.

ACS Paragon Plus Environment

Crystal Growth & Design 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

23

24

INTRODUCTION

25

A pharmaceutical cocrystal is a multi-component crystalline system containing a drug with a

26

hydrogen or halogen bond forming coformer1. Solution based cocrystallisation has several

27

drawbacks including the high amount of solvent required, residual solvent in the product and

28

low process yields2. In the last decade multidisciplinary teams have developed innovative

29

technologies in the area of green and scalable technologies for cocrystal synthesis, including

30

use of ultrasound3,4, microwaves5 and hot melt extrusion6-8. Investigations have also been

31

carried out to understand challenges in formulation of cocrystals, which are summarised here.

32

Jones, et al. made a major contribution to the application of mechanochemistry for cocrystal

33

synthesis9-11. Mechanochemistry provides energy to enable the cocrystallisation reaction by

34

subjecting reactants to forces between sliding/colliding surfaces12 for example grinding

35

together a drug and coformer in a ball mill has been used to produce cocrystals9,10,13,14.

36

Cocrystal synthesis using a ball mill can be performed either by neat grinding or in the

37

presence of a small proportion of solvent or polymer. Although there have been significant

38

investigations into cocrystal synthesis using ball mills, it is not easy to scale up the process.

39

During ball milling, shearing of the two components occurs when balls impact each other and

40

wall of the mill. Ball milling is a batch process, where the shear applied is relatively low and

41

so it is generally used as a screening technique15,16. Andersen and Mack17 successfully

42

applied Arrhenius equation to the ball milling process which will enable conversion of

43

conventional solution based synthesis to ball milling process. This approach will address

44

challenges in scale up and process control in ball milling. Recently, our group reported

45

continuous thermo-mechanical synthesis of cocrystals using a hot melt extruder7. Significant

46

advantages have been demonstrated for Solvent Free Continuous Cocrystallisation (SFCC)8

47

using a hot melt extruder compared to solution cocrystallisation and grinding, including high

ACS Paragon Plus Environment

Page 2 of 23

Page 3 of 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Crystal Growth & Design

48

yield and throughput18, control of stoichiometry, particle size control and suitability for real

49

time monitoring19. However, as the material is exposed to shear and high temperature for

50

relatively long periods of time its stability may be affected in some cases.

51

Here we report for the first time a continuous milling technology for synthesis of cocrystals

52

in the presence of small amounts of polymers. The Solid State Shear Mill (S3M) (Figure 1,

53

drawn using solid modelling software SOLIDWORKS) is a pan mill designed by the polymer

54

engineering group at Sichuan University, China for tribochemistry20. The unique design of

55

the S3M provides extremely high frictional energy at the tribological interfaces. The high

56

frictional forces cause a rise in temperature while subjecting the mixture to high shear

57

stresses for a short duration.

58

depolymerisation and compatibilisation applications for polymeric systems20-31. Here, S3M

59

technology provides a continuous solvent free approach to the manufacture of cocrystals

60

which may address issues associated with current technologies.

61

S3M Design

62

The S3M (SI 1, Figure 1) consists of two in-laid pans, a rotor and a stator made up of wear

63

resistant materials with specially treated surfaces. The stator is fixed on the equipment case

64

and a rotor pan is mounted on the axis attached to a motor. Engraved diametrical lines divide

65

the pan surfaces into equal sectors. Within each sector a number of bevels are present with

66

ridges parallel to the dividing diametrical lines. The ridges and the bevels of the pan surfaces

67

are placed facing each other to form a unit cell CDEF-CHGB (Figure 2)20, ABCD represents

68

its projection on the level surface. A 3D scissoring action is provided by the change in shape,

69

volume and position of the unit cell when the moving pan surface runs over the stationary

70

pan. The change in volume of the unit cell results in localised high pressure and shear forces.

71

The movement of the unit cell in both circular and radial direction causes continuous

S3M has been successfully applied in nanocomposites,

ACS Paragon Plus Environment

Crystal Growth & Design 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

72

contraction and division of material from its entrance at the centre of the pan to its exit at the

73

outer edge.

74 75

Figure 1: Schematic of continuous cocrystallisation using S3M

76 77

Figure 2: a) Pattern of moving pan on stationary pan, b) Three dimensional scheme for unit

78

cell CDEF-CHGB20

ACS Paragon Plus Environment

Page 4 of 23

Page 5 of 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Crystal Growth & Design

79

S3M, characterised by high shear, low residence time and the ability to operate without

80

solvents is already proven in mechanochemical polymeric applications. The high level of

81

shear at tribological interfaces coupled with the associated rise in temperature could also

82

provide sufficient energy to synthesise cocrystals, with low residence times to minimise

83

degradation. The objective of this work was to investigate the potential of S3M as a

84

continuous technology for cocrystal manufacturing.

85



EXPERIMENTAL SECTION

86

Materials. Carbamazepine (CBZ, purity: 99.0%, Mol. Wt. 236.26 gram (g)/mol) was

87

purchased from Taj pharmaceuticals, India (Lot no. TPL/CARB/002), salicylic acid (SAL,

88

purity: 99.0%, Mol. Wt. 138.12 g/mol) was purchase from Sigma-Aldrich (UK), polyethylene

89

oxide (PEO N80 grade, Mol. Wt. 200,000 g/mol) was purchased from Colorcon (UK). All the

90

organic solvents used for UPLC analysis were purchased from Sigma-Aldrich (UK).

91

S3M processing. Accurately weighed CBZ (236.26 g) and SAL (138.12 g) in 1:1 molar ratio

92

were mixed well, to this PEO N80 was added in the concentration of 5%, 10% 15% and 25%

93

w/w. This mixture was blended using a Turbula mixer for 15 mins. The resultant

94

homogenous mixture was fed to the S3M through the hopper via central feeding port. The

95

proof of concept mill does not have feed control so manual feeding was used. The motor

96

speed was maintained at 500 rpm and the gap between stator and rotor was kept to the

97

minimum setting (