Convergent Synthesis of 6-Substituted Phenanthridines via Anionic

The Royal Danish School of Pharmacy, Department of Medicinal Chemistry, ... to the cyano group of 2-(2-fluorophenyl)benzonitrile followed by intramole...
0 downloads 0 Views 35KB Size
ORGANIC LETTERS

Convergent Synthesis of 6-Substituted Phenanthridines via Anionic Ring Closure

2002 Vol. 4, No. 2 257-259

Morten Lyse´n, Jesper L. Kristensen, Per Vedsø,*,† and Mikael Begtrup The Royal Danish School of Pharmacy, Department of Medicinal Chemistry, UniVersitetsparken 2, DK-2100, Copenhagen, Denmark [email protected] Received November 7, 2001

ABSTRACT

The addition of organometallic derivatives to the cyano group of 2-(2-fluorophenyl)benzonitrile followed by intramolecular nucleophilic substitution produces 6-substituted phenanthridines. Alkyllithiums, aryllithiums, and sterically nondemanding lithium amides reacted at −78 °C to produce the 6-substituted phenanthridines in 82−98% yield upon warming to room temperature. The addition of the corresponding Grignard reagents requires an excess of the organometallic reagent and extented reaction times at elevated temperature.

The addition of organometallic species to cyano groups is a fundamental transformation in organic synthesis.1 The resulting imine intermediates can be protonated and isolated at the imine-stage or hydrolyzed to yield the corresponding ketones.2 Alternatively, the intermediate imine anions can be trapped with electrophiles.3 Protocols for the intramolecular trapping of imine-anions have also been developed. Thus, addition of Grignard reagents to the cyano group of 4-chlorobutyronitriles and subsequent intramolecular displacement of the chloride produces substituted pyrrolines.4 We now wish to report a new variant of this reaction, see † Current address: Novo Nordisk A/S, Medicinal Chemistry Research, DK-2760, Måløv, Denmark. (1) Kharash, M. S.; Reinmuth, O. Grignard Reactions of Non-Metallic Substances; Prentice Hall: New York, 1954; Chapter 10. (2) (a) Wakefield, B. J. The Chemistry of Organolithium Compounds; Pergamon Press Ltd.: Oxford, 1974; pp 116-121. (b) Wakefield, B. J. Organomagnesium Methods in Organic Synthesis; Academic Press Limited: London, 1995; pp 101-108. (3) (a) Chan, L. H.; Rochow, E. G. J. Organomet. Chem. 1967, 9, 231250. (b) Padwa, A.; Koehn, W. P. J. Org. Chem. 1975, 40, 1896-1902. (c) Hose, D. R. J.; Mahon, M. F.; Molloy, K. C.; Raynham, T.; Wills, M. J. Chem. Soc., Perkin Trans. 1 1996, 691-703. (d) Ortiz-Marciales, M.; Tirado, L. M.; Colo´n, R.; Ufret, M. L.; Figueroa, R.; Lebro´n, M.; DeJesu´s, M.; Martı´nez, J.; Malave´, T. Synth. Commun. 1998, 28, 4067-4075. (4) Demoen, P. J. A.; Janssen, P. A. J. Chem. Soc. 1959, 6281-6285 and references therein.

10.1021/ol0170051 CCC: $22.00 Published on Web 01/04/2002

© 2002 American Chemical Society

Scheme 1.5 Addition of an organometallic reagent to the cyano group of 2-(2-fluorophenyl)benzonitrile (1) gives the

Scheme 1.

6-Substituted Phenanthridines via Anionic Ring Closure

intermediate imine-anion (2). Subsequent intramolecular nucleophilic aromatic substitution gives 6-substituted phenanthridines (3). Substituted phenanthridines are of great interest for medicinal chemistry applications and have a broad range of biological activities.6 The Bischler-Napieralski cyclization (5) We recently reported a similar approach to the synthesis of substituted pyrazoloquinolines; see: Pawlas, J.; Vedsø, P.; Jakobsen, P.; Huusfeldt, P. O.; Begtrup, M. J. Org. Chem. 2001, 66, 4214-4219.

has been used extensively to synthesize phenanthridine derivatives.7 It is usually performed in the presence of P4O10, POCl3, or PCl5 at elevated temperature, thereby limiting the kind of functional groups that can be tolerated. Many other synthetic routes to phenanthridines have been developed.8 The key starting compound 1 required for the anionic ring closure was accessed via a Suzuki cross-coupling reaction.9 The biphenyl could be prepared in two ways, see Scheme 2.

Scheme 2.

Dual Synthesis of 1a

a Key: (i) 3% Pd(PPh ) , K CO , toluene/EtOH/H O 6:1:1, 85 3 4 2 3 2 °C, 7 h.

This dual approach should offer the possibility of preparing a wide selection of substituted derivatives of 1 using readily available aryl halides and arylboronic acids and esters. The arylboronic esters in Scheme 2 were prepared as previously reported.10 In our initial experiment we focused on the Cu(I)-catalyzed addition of Grignard reagents to 1.11 The reactions were very sluggish and required heating for extended time (Table 1,

59% and 49% yields under similar conditions, whereas p-tolylMgCl gave the desired product 3e in 81% yield after 3 h at 70 °C. The reaction with t-BuMgCl (entry 4) gave complicated mixtures under several different conditions and none of the desired product 3d could be isolated. The addition to the cyano group appears to be the ratelimiting step, as the imine-intermediate was not observed at any time. In an attempt to speed up the reaction, the use of the corresponding lithium reagents was investigated. The addition to the cyano group proceeded at -78 °C, and subsequent warming of the reaction mixture to room temperature produced the desired 6-substituted phenanthridines; see Table 1. Yields were higher than with Grignard reagents, and only 1.05 equiv of the organolithium reagent was required to obtain full conversion of 1. Notably, tert-butyllithium produced the desired product 3d in 85% yield (entry 4). Furthermore, higher yields were obtained when 1 was added to a solution containing the lithium reagents. 6-Butylphenanthridine (3c) was isolated in 87% yield when 1 was added to n-butyllithium at -78 °C, compared to 77% when the order of addition was reversed. The protocol was extended to other aryllithium reagents; see Table 2. The 6-aryl-substituted phenathridinines 3f-h

Table 2. Synthesis of 6-Substituted Phenanthridines via the Addition of Aryllithium Reagents and Lithium Amides to 1

Table 1. Synthesis of 6-Substituted Phenanthridines via the Addition of Grignard and Organolithium Reagents to 1

a a Yields of chromatographically pure product. b 3 equiv of RMgCl, 3% CuI, reflux 20 h. c 1.05 equiv of RLi, -78 °C to room temperature. d Experiment not performed. e Complex mixture. f Reflux for 3 h.

entries 1-5). Furthermore, 3 equiv of Grignard reagent was needed. Refluxing 1 with 1 equiv of i-PrMgCl in the presence of 3% CuI for 20 h gave a 3:2 mixture of unchanged 1 and the desired 6-substituted phenanthridine 3b. When 3 equiv of i-PrMgCl was used, the desired product 3b was isolated in 74% yield. MeMgCl and n-BuMgCl gave 3a and 3c in 258

Yields of chromatographically pure product.

were isolated in 82-92% yield. 6-Aryl-substituted phenanthridines have been reported as potent DNA-intercalating antitumor agents.6a Furthermore, sterically nondemanding lithium amides reacted smoothly to give the corresponding 6-aminophenanthridines 3i-k in 88-98% yield.12 Recently, (6) DNA-Intercalating antitumor agents: (a) Atwell, G. J.; Baguley, B. C.; Denny, W. A. J. Med. Chem. 1988, 31, 774-779. 5-HT3 receptor ligands: (b) Cappelli, A.; Anzini, M.; Vomero, S.; Mannuni, L.; Makovec, F.; Doucet, E.; Hamon, M.; Bruni, G.; Romeo, M. R.; Menziani, M. C.; Org. Lett., Vol. 4, No. 2, 2002

3k and analogues thereof were reported to have high affinity for the 5-HT3 receptor.6b Our approach provides a rapid and convergent access to this class of compounds. In conclusion, we have developed a rapid and convergent synthesis of 6-substituted phenanthridines proceeding in two steps from readily available starting materials. The addition of alkyllithiums, aryllithiums and lithium amides to 2-(2fluorophenyl)benzonitrile (1) produces the corresponding Benedetti, P. G.; Langer, T. J. Med. Chem. 1998, 41, 728-741. Topoisomerase inhibitors: (c) Janin, Y. L.; Croisy, A.; Riou, J.-F.; Bisagni, E. J. Med. Chem. 1993, 36, 3686-3692. (d) Lynch, M. A.; Duval, O.; Sukhanova, A.; Devy, J.; MacKay, S. P.; Waigh, R. D.; Nabiev, I. Bioorg. Med. Chem. Lett. 2001, 11, 2643-2646. Positive ionotropic activity: (e) Heber, D.; Ju¨rgens, J.; Ravens, U.; Schumann, J. Arch. Pharm. (Weinheim, Ger.) 1988, 321, 787-792. Antituberculosis activity: (f) Ishikawa, T. Med. Res. ReV. 2001, 21, 61-72. (7) (a) Mamalis, P.; Petrow, V. J. Chem. Soc. 1950, 703-711. (b) BuuHoı¨, N. P.; Jaquignon, P.; Long, C. T. J. Chem. Soc. 1957, 505-509. (8) For a comprehensive list of references see Patra, P. K.; Suresh, J. R.; Ila, H.; Junjappa, H. Tetrahedron 1998, 54, 10167-10178. (9) Miyaura, N.; Suzuki, A. Chem. ReV. 1995, 95, 2457-2483. (10) Kristensen, J.; Lyse´n, M.; Vedsø, P.; Begtrup, M. Org. Lett. 2001, 3, 1435-1437. (11) Weiberth, F. J.; Hall, S. S. J. Org. Chem. 1987, 52, 3901-3904. (12) Attempted addition of lithium diisopropylamide to 1 led to a complex mixture, presumably due to competing ortho-lithiation.

Org. Lett., Vol. 4, No. 2, 2002

6-substituted phenanthridines 3a-k via an intramolecular anionic ring closure.13 We are currently exploring the scope of the reaction with respect to substituted derivatives of 1 and the application of other nucleophiles. Supporting Information Available: Detailed experimental procedures and characterization for compounds 1 and 3a-k. This information is available free of charge via the Internet at http://pubs.acs.org. OL0170051 (13) Representative Procedure. 6-Piperidyl-phenanthridine (3j). Piperidine (91 mg, 1.05 mmol) was dissolved in THF (4 mL) under N2 and cooled to -10 °C. n-Butyllithium (1.6 M in hexanes, 1.05 mmol) was added, and stirring was continued for 10 min. The mixture was cooled to -78 °C before 2-(2-fluorophenyl)benzonitrile (1) (1.00 mmol) dissolved in THF (2 mL) was added dropwise, and stirring was continued for 15 min. The dry ice bath was removed, and the mixture was stirred at room temperature for 20 min. The reaction was quenched with saturated NH4Cl (10 mL), extracted with CH2Cl2 (3 × 20 mL), and dried (Na2SO4), and the solvent was evaporated giving the crude product, which was purified by flash chromatography yielding 246 mg (94%) of 3j as colorless crystals, mp 86 °C, reported mp 82-83 °C. Keene, B. R. T.; Turner, G. L. Tetrahedron 1971, 27, 3405-3416.

259