Discovery of a Diaminopyrimidine FLT3 Inhibitor ... - ACS Publications

This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

Article http://pubs.acs.org/journal/acsodf

Discovery of a Diaminopyrimidine FLT3 Inhibitor Active against Acute Myeloid Leukemia Jamie A. Jarusiewicz,† Jae Yoon Jeon,‡ Michele C. Connelly,† Yizhe Chen,†,§ Lei Yang,† Sharyn D. Baker,‡ and R. Kiplin Guy*,†,§ †

Department of Chemical Biology and Therapeutics, St. Jude Children’s Research Hospital, 262 Danny Thomas Place, Memphis, Tennessee 38105, United States ‡ Division of Pharmaceutics, College of Pharmacy, The Ohio State University, 500 W. 12th Street, Columbus, Ohio 43210, United States S Supporting Information *

ABSTRACT: Profiling of the kinase-binding capabilities of an aminopyrimidine analogue detected in a cellular screen of the St. Jude small-molecule collection led to the identification of a novel series of FMS-like tyrosine kinase 3 (FLT3) inhibitors. Structure−activity relationship studies led to the development of compounds exhibiting good potency against MV4-11 and MOLM13 acute myelogenous leukemia cells driven by FLT3, regardless of their FLT3 mutation status. In vitro pharmacological profiling demonstrated that compound 5e shows characteristics suitable for further preclinical development.

■

INTRODUCTION Acute myelogenous leukemia (AML) is characterized by malignant proliferation of hematopoietic cells in the bone marrow, leading to overproduction of abnormally functioning white blood cells. This situation leads to decreased production of red blood cells, infection, and dysfunction of organs. AML occurs in roughly 4 per 100 000 individuals; more than half of the reported cases occur in individuals over 65 years of age.1 Although the use of hematopoietic stem cell transplants has provided some improved clinical outcomes in AML patients, there has been very little improvement in patient prognosis over the past 20 years.2 Normal functioning of FMS-like tyrosine kinase 3 (FLT3), a type III receptor tyrosine kinase, is important for the development and proliferation of hematopoietic stem cells.3,4 The binding of the FLT3 ligand to this transmembrane protein causes dimerization and subsequent FLT3 autophosphorylation, which then triggers the activation of several signaling cascades, including the RAS, SRC, and STAT5 pathways.5−8 Constitutive activation of FLT3 leads to dysregulated cellular proliferation of hematopoietic cells, and nearly one-third of AML patients have mutations in the FLT3 gene.9 Two classes of mutations are commonly found in FLT3: an internal tandem duplication (ITD) located in the juxtamembrane domain, which is the most common, and point mutations at or near residue Asp835.10−14 Typically, an AML patient’s prognosis is worse if he/she possesses the FLT3-ITD mutation compared to that for patients having normal levels of wild-type FLT3 (wt-FLT3).15,16 Initially, kinase inhibitors developed for solid tumors were investigated as FLT3 inhibitors. Several of these inhibitors, including midostaurin,17−19 lestaurtinib,20−22 crenolanib,23−26 tandutinib,27−29 sunitinib,30−32 and sorafenib,33−36 have been © 2017 American Chemical Society

evaluated in clinical trials. These compounds tended to inhibit multiple tyrosine kinases, thus leading to toxicity due to off-target effects.37 Subsequently, quizartinib and crenolanib were developed as more selective FLT3 inhibitors.38−42 The clinical response to FLT3 inhibitors often persists only for a short duration, with acquired point mutations in FLT3 that impact the binding of the inhibitors driving the limited response.37,43,44 In particular, FLT3 Asp835 mutants tend to be resistant to “type II” kinase inhibitors that bind to an inactive conformation of the enzyme, wherein the inhibitor is able to make contacts within an allosteric pocket adjacent to the ATP site due to the Asp-Phe-Gly (DFG) motif in the activation loop adopting a conformation in which it is flipped out relative to its active conformation.45−48 However, treatment with different FLT3 inhibitors can lead to alternate sets of acquired mutations, and some “type I” ATPpocket-binding inhibitors, which bind within the ATP site but do not reach into the allosteric pocket and do not rely on specific DFG motif conformations, such as crenolanib, are able to bind selectively to FLT3 and also retain their activity against FLT3 Asp835 mutants.23,49,50 Consequently, the development of additional new FLT3 inhibitors that can retain their activity against commonly acquired mutations or the use of FLT3 inhibitors in combination therapies may be potential methods to circumvent the problem of resistance. While investigating potential compounds of interest identified during a cellular high-throughput phenotypic screen for a brain tumor project (results not yet published), the kinase-binding profile of one of the hits suggested potential use as a FLT3 Received: February 8, 2017 Accepted: April 19, 2017 Published: May 10, 2017 1985

DOI: 10.1021/acsomega.7b00144 ACS Omega 2017, 2, 1985−2009

ACS Omega

Article

finding suggested that 1 acts on FLT3-ITD in these cells. Although aminopyrimidines have been well studied as kinase inhibitors, low-molecular-weight structures that include an aliphatic moiety, such as 1, are not as widely reported and, to the best of our knowledge, have not been described specifically as FLT3 kinase inhibitors.56,57 Taken together, the promising activity profile and fairly novel structural character of 1 prompted us to explore additional SARs. Chemistry. We developed a general route for the synthesis of the majority of the compounds discussed herein (Scheme 1) on the basis of prior work on Aurora kinase inhibitors.58 The route, which relied upon sequential additions of an aliphatic amine and various anilines to 2,4-dichloropyrimidine, facilitated systematic variation of the amine substituents at the 2- and 4-positions of the pyrimidine ring. Whereas the first substitution using an aliphatic amine typically proceeded facilely at either 0 °C or room temperature (rt), subsequent reactions with the anilines required increased temperature and catalytic HCl. Anilines were obtained either from commercial vendors or were synthesized via the Suzuki reaction or other known procedures (Schemes S1− S6).59,60 To help define the minimal pharmacophore, we investigated the impact of removing nitrogen atoms from the scaffold. Pyridine analogues were synthesized by the routes shown in Schemes 2 and 3. These involved nucleophilic addition of cyclohexylamine to the halopyrimidine, followed by a palladium-catalyzed coupling reaction to install the 3-pyridinyl3-ylaniline functional group. Schemes 4−7 depict the routes used to synthesize analogues in which the amine linkers at the 2- and/ or 4-positions of the aminopyrimidine were replaced with Nmethyl or oxygen. N-Methylcyclohexane was installed at the 2position by treating with triethylamine (Scheme 4), whereas cyclohexanol was incorporated by reacting with 2,4-dichloropyrimidine in the presence of sodium hydride (Scheme 5). Substituents at the 4-position were installed using catalytic HCl and by refluxing in ethanol (EtOH) (Schemes 4−7). Overall, the routes proceeded with sufficient yield (3−85% yield), producing all targeted analogues for characterization, although, undoubtedly, further optimization could be beneficial for individual analogues. All compounds used for subsequent testing were purified to greater than 95% purity, as confirmed by the combination of liquid chromatography−mass spectrometry (LC−MS) and 1H NMR studies. SAR. We utilized the FLT3WT enzyme assay to determine the potencies of all analogues of 1 made during this study (Table S2). In parallel, we tested the effects on the proliferation of MV4-11 cells (Table S2). We also measured the effects of these compounds on the proliferation of untransformed BJ fibroblasts to evaluate the dependency of cellular effects upon the presence of a driving FLT3 mutation (Table S3). Because cellular assays include fetal bovine serum within the media, there is a potential that the EC50 values could differ from the actual values due to plasma protein binding.61 The solubility and permeability as well as the potential susceptibility to P-glycoprotein (PGP) efflux were assessed for selected compounds (Tables S4 and S5) to aid in interpreting the data and planning for structural modifications. The initial focus of the project was defining the minimal pharmacophore for the inhibitors. Replacement of the nitrogen at the 1-position with a carbon atom (9) did not have a large impact on potency for kinase inhibition but completely ablated effects upon proliferation of MV4-11 cells (Table 2). Removal of the nitrogen at the 3-position (13) reduced the potency of kinase inhibition compared to that of 1, while adding weak antiproliferative effects on untransformed BJ cells (Table S3).

inhibitor. We therefore synthesized a series of compounds based on this hit for evaluation against FLT3 and investigation of their activities in AML cell lines. Herein we describe the structure− activity (SAR) and structure−property relationships resulting from this series of molecules.

■

RESULTS AND DISCUSSION Preliminary Profiling of the Hit (1). The kinase-binding profile of 1 was evaluated using the DiscoveRx KINOMEscan panel of 468 kinases, with ligand competition being measured at a single inhibitor concentration of 1 (10 μM).51−53 Selectivity was evaluated through a comparison of the number of nonmutant kinases with which 1 interacted relative to the total number of nonmutant kinases tested. Compound 1 reduced ligand binding by >90% for 31 kinases of 403 nonmutant kinases tested. Within that set, seven had activity reduced to >99% of that of the control. As depicted in Figure 1, 1 bound with the highest affinity to

Figure 1. Lead series analogue 1. (a) Structure of 1. (b) Kinase profiling of 1. Kinase tree image showing relative inhibition of ligand binding to 468 human kinases, with the size of the circle being proportionate to the % inhibition at a fixed dose of 10 μM.

kinases in the tyrosine kinase family. Further information on the kinase-binding profile is found in Table S1. Subsequently, the Kd values were determined for kinases in which compound 1 had blocked the binding of ligand by >90%, revealing that 1 bound with a high affinity to FLT3 (61 nM) and a significant but lower affinity to PDGFRB, the JAK1 JH2 domain, and JAK2 JH1 domain (Table 1). Eleven of the kinases had binding affinities within tenfold of those for the FLT3 primary target, which is a reasonably selective binding profile. For instance, previously studied kinase inhibitors, such as the AKT1 inhibitor GSK690693, the IGF1R inhibitor GSK-1838705A, and the mammalian target of rapamycin inhibitor PP-242, had similar relative selectivity profiles.54 We also verified that compound 1 inhibited the enzymatic activity of FLT3. As measured using the Z′LYTE kinase inhibition assay (ThermoFisher), 1 was a potent inhibitor of the FLT3WT enzyme (IC50 = 32 nM; 95% confidence interval (CI 95), 24−43 nM).55 Compound 1 was also a reasonably potent inhibitor of proliferation for the wellcharacterized MV4-11 AML cell line, which carries an FLT3ITD mutation (EC50 = 320 nM; CI 95, 160−650 nM). This 1986


ACS Omega

Article

Table 1. Kd Values for 1

a

kinase

Kd (nM)a

kinase

Kd (nM)a

ABL1 (H396P)-phosphorylated AURKA AURKC AXL BLK CLK1 CLK4 CSF1R CSF1R-autoinhibited EPHB6 FLT3 HCK IRAK1 IRAK3 JAK1 (JH2 domain-pseudokinase) JAK2 (JH1 domain-catalytic) JAK3 (JH1 domain-catalytic) KIT

2100 1600 >10 000 2100 3900 430 690 590 1500 560 61 2100 1500 1400 290 260 1300 1500

LCK MERTK MINK NEK10 PDGFRB PIK4CB PIP5K1C PRKCQ PRKD3 RET (M918T) RET (V804M) RSK1 (Kin.Dom.1-N-terminal) SRC TRKA TYK2 (JH1 domain-catalytic) TYK2 (JH2 domain-pseudokinase) TYRO3

2900 2800 2500 410 120 370 610 1600 1700 1200 1400 4400 1100 1100 350 740 2700

Kd values are reported as the mean of two experiments.

proliferation. Although the lack of enzymatic inhibition exhibited by N-methylated compounds 17 and 21 could suggest that a key hydrogen-bonding interaction may be made with FLT3 through the amine at the 2-position, compound 20, which contains an ether at this location, also demonstrated potent FLT3 inhibition. Therefore, it is not clear what particular interactions occur between these compounds and the kinase. Overall, however, the inclusion of amine linkers at the 2- and 4-position provided the best combination of enzymatic and cellular activity. On the basis of these results, we focused on the 2,4-aminopyrimidine scaffold for further optimization. Next, we explored the replacement of the pendent hydrophobic groups surrounding the aminopyrimidine scaffold. First, the cyclohexyl substituent at the 4-position was fixed, while the substituent at the 2-position was systematically varied (Table 4). Paring the structure down by removing the pyridine ring (4a) caused a reduction in FLT3 inhibitory activity and ablated activity in MV4-11 cells; therefore, this functional group may improve binding to FLT3 through a potential a H-bonding interaction. Reductions in FLT3 inhibition and MV4-11 cellular activity were also observed with compounds 4c−f, which also did not contain the pyridine ring in 1. Replacement of the 3-(pyridin3-yl)aniline moiety with either 2- or 3-substituted biphenyl (4b, 4g) abolished all activity. Incorporation of a 3′-methoxybiphenyl (4i) or methyl ester (4j) led to a reduction in enzymatic and MV4-11 cellular activities compared to those of 1, and these compounds also gained weak activity against BJ cells (Table S3). Shifting the location of the ring nitrogen (4h) reduced the activity compared to that of 1. However, replacement of the 3-

Scheme 1. General Route for the Synthesis of 2,4Aminopyrimidine Analoguesa

a

Reagents and conditions: (a) NH2-R1, dichloromethane (DCM) or methanol (MeOH) or NH2−R1, triethylamine, DCM, rt, 5−16 h, 1− 60%; (b) NH2-R2, catalytic HCl, EtOH or MeOH, reflux, 1−22 h, 3− 85%.

Compound 14, in which the location of the ring nitrogen had shifted, exhibited good enzymatic inhibitory potency but lacked MV4-11 cellular activity and also was weakly active against BJ fibroblasts (Table S3). Therefore, the pyrimidine core was necessary for optimal activity. We examined the effects of replacing the linker atoms on both FLT3 inhibition and MV4-11 proliferation using both N-methyl and ether replacements (Table 3). Although replacement of the 2-amine with N-methyl abrogated activity against FLT3 (21, 17), 17 possessed modest cellular potency, which might be due to metabolic removal of the methyl groups (unexplored). Replacement of the amine linkers with ethers at either the 4position (19) or both the 2- and 4-position (20) did not greatly impact the enzymatic activity, whereas replacement of only the 2nitrogen with an ether linkage did reduce the enzymatic activity nearly 40-fold compared to that of 1 (22). However, compounds 19, 22, and 20 were all devoid of effects on MV4-11 cell Scheme 2. Synthesis of Compound 9a

Reagents and conditions: (a) aminocyclohexane, triethylamine, N-methyl-2-pyrrolidone (NMP), 100 °C, 21 h, 10%; (b) 3-pyridinyl-3-ylaniline, Pd2(dba)3, R-BINAP, sodium tert-butoxide, toluene, 80 °C, 16 h, 56%. a

1987


ACS Omega

Article

Scheme 3. Synthesis of Compounds 13 and 14a

a Reagents and conditions: (a) aminocyclohexane, triethylamine, NMP, 80 °C, 16 h, 15% 11, 2% 12; (b) 3-pyridinyl-3-ylaniline, Pd2(dba)3, RBINAP, sodium tert-butoxide, dimethylformamide (DMF), 140 °C, 35 mW, 1 h, 24%; (c) 3-pyridinyl-3-ylaniline, Pd2(dba)3, R-BINAP, sodium tertbutoxide, toluene, 80 °C, 16 h, 9%.


a Reagents and conditions: (a) N-methylaminocyclohexane, triethylamine, ethanol, reflux, 5 h, 59%; (b) 3-pyridinyl-3-ylaniline, catalytic HCl, ethanol, reflux, 3 h, 25%; (c) N-methyl-3-(pyridin-3-yl)aniline, catalytic HCl, ethanol, reflux, 2 h, 27%.


a Reagents and conditions: (a) cyclohexanol, sodium hydride, DMF, 0 °C to rt, 16 h, 3%; (b) 3-pyridinyl-3-ylaniline, catalytic HCl, ethanol, reflux, 3 h, 9%; (c) 3-(pyridin-3-yl)phenol, catalytic HCl, ethanol, reflux, 16 h, 52%.

Scheme 6. Synthesis of Compound 21a

Scheme 7. Synthesis of Compound 22a

a

a

pyridinyl group with other nitrogen-containing heterocycles was tolerated by FLT3 (4k−n), further suggesting that a nitrogen atom in this position may provide critical interactions with FLT3. Compounds 4o, 4p, and 4r, which also lacked a pyridinyl nitrogen, showed diminished FLT3 inhibition compared to that by 1 as well. Although compound 4q contained the desired

pyridine ring, altered molecular conformations may have led to this compound’s lack of activity. Compound 4s also exhibited good activity, suggesting that the carboxamide moiety may be in a beneficial location for hydrogen-bonding interactions with FLT3. Inclusion of a pyridine ring at the para position (4t) provided modest FLT3 activity but good MV4-11 cellular

Reagents and conditions: 3-(pyridin-3-yl)phenol, catalytic HCl, ethanol, reflux, 16 h, 81%.

Reagents and conditions: N-methyl-3-(pyridin-3-yl)aniline, catalytic HCl, ethanol, reflux, 2 h, 6%.

1988


ACS Omega

Article

afforded good potency against the FLT3 enzyme, poor solubility (Table S4) may have hampered the cellular activity of the latter. Despite its low solubility, compound 5o exhibited good cellular activity. Therefore, additional properties beyond solubility could potentially have subtle effects on activity. Although 5q was approximately 4-fold more potent than 1 against FLT3, the potency against MV4-11 cells was not improved due to poor cellular permeability (Table S4). Inclusion of a methoxy group (5p) was not beneficial. Replacing the amine functionality in the aliphatic ring of 5q with an ether (5r) provided only moderate enzymatic and cellular activities. Because of its improved activity against FLT3 and MV4-11 cells compared to that of 1, we fixed the 4-position as the isopropyl group and varied the 2-position of the compound to determine whether the activity trends observed would be similar to those in the cyclohexyl series, as previously shown in Table 4. Similar to that in the cyclohexyl series, inclusion of a methoxy group (6e) or replacement of the pyridine functionality with a 2-, 3-, or 4-biphenyl (6a, 6c, 6m) caused decreases in both FLT3 inhibitory activity and cellular potency (Table 6). Inclusion of a tert-butyl group in place of the pyridine ring (6b) abrogated activity as well. Shifting the nitrogen from the 3-position to the 2position (6d) or the 4-position (6l) also reduced potency, paralleling our prior observations and suggesting that a nitrogen at the 3-position may act as an H-bond acceptor to make an important binding interaction. Incorporation of a methyl ester (6f) led to reduced activity. The potency was comparable to that of 1 when the 3-pyridinyl group was replaced with a pyrazole (6i), and inhibition of MV4-11 cell proliferation improved when an imidazole (6j) or pyrazine (6k) replaced the pyridine. Compounds containing oxazole (6g) or thiazole (6h) moieties, however, provided less potent FLT3 inhibition and MV4-11 cellular activity. Similar to the effect observed with 4s, the carboxamide-functionalized compound 6n also exhibited moderate enzymatic inhibition and activity against MV4-11 cells. On the basis of the balance of activity, we selected 5e for further profiling. The compound retained its FLT3 potency (3.6 nM) and selectivity on the basis of profiling the Kd values for a subset of kinases inhibited by 1 (Table 7). Despite potent binding to PDGFRB (28 nM) and the JAK1 JH2 domain (28 nM), 5e was still approximately 8-fold more potent against FLT3. Therefore, modifications explored during the SAR studies did not appear to significantly affect kinase selectivity compared to that of the initial hit compound. In Vitro Effects against FLT3 Mutants and MOLM13 Cells. Because of the demonstrated activity of this series of compounds in MV4-11 cells, we evaluated a subset of compounds to determine whether they inhibited the proliferation of other FLT3 mutant AML cells. The initial hit compound 1 and 5e, 6k, and a structurally related inactive compound 6a were tested for their ability to inhibit the proliferation of MOLM13 cells, which also contain the FLT3-ITD mutation, and a sorafenib-resistant progeny of MOLM13 that has acquired an additional tyrosine kinase domain (TKD) mutation, Asp835.50 As shown in Figure 2, 6k was the most potent at inhibiting MOLM13 cell viability (IC50 = 45 nM; CI 95, 38−55 nM), followed by 5e (IC50 = 136 nM; CI 95, 112−164 nM). The relative sensitivity of MOLM13 cells to 5e and 6k was correlated to the loss of FLT3-ITD phosphorylation and downstream STAT5 signaling, with FLT3 IC50 values estimated to be within 50−100 nM in these experiments (Figure 3). In addition, all three tested compounds (1, 5e, and 6k) possessed similar growth inhibitory potencies against both parental MOLM13FLT3‑ITD and

Table 2. SAR of the Aminopyrimidine Ring for Compounds 9, 13, 14, and Quizartinib

compd.

X

Y

Z

9 13 14 quizartinib

C C N

N C C

C N C

FLT3 IC50 (nM)a

MV4-11 EC50 (nM)a

BJ EC50 (nM)a

80 1500 141 40

>10 000 >16 000 >8000 0.7

>10 000 10 615 8741 >22 000

a

IC50 and EC50 values are reported as the mean of triplicates. Values for CI 95 are included in Table S3.

Table 3. SAR Analysis of Modifications to the Linkers for Compounds 16, 17, and 19−22

compd.

X

Y

FLT3 IC50 (nM)a

MV4-11 EC50 (nM)a

16 21 17 19 22 20

N-Me NH N-Me O NH O

NH N-Me N-Me NH O O

82 >11 000 >15 000 187 1260 49

>8000 >4000 39 >6000 >14 000 >13 000

a


activity. Although compound 4u was inactive against FLT3, an effect on MV4-11 cell proliferation was observed. The potential off-target kinase activity of this compound was not investigated, but interactions with other kinases may contribute to the moderate cellular activity of compounds 4t and 4u. Taken together, these results point to a very strong preference for particular steric and electronic arrangements on this portion of the molecule, with the original 3-pyridinylphenyl presenting a good balance of properties. In parallel, we synthesized a series of compounds keeping the 3-pyridinyl-3-ylaniline moiety constant, while varying the aliphatic substituents at the 4-position. Short linear, branched, and cyclic aliphatic groups were evaluated (Table 5). Although reduced enzymatic inhibition and a loss of MV4-11 cellular activity was observed when replacing the cyclohexyl group with a methyl (5a), good potency was obtained with either an ethyl (5b) or propyl (5c) group and moderate potency was obtained with a butyl (5d) group. Branched alkyl chains, such as isopropyl (5e), sec-butyl (5j, 5k), and tert-butyl (5f), provided improvements in the FLT3 inhibitory activity and approximately 10-fold improvements in MV4-11 growth inhibition relative to those of 1. Inclusion of ether (5g), ester (5h), or carboxylic acid (5i) functionalities within the branched aliphatic substituents greatly reduced cellular activity. Although 5g had good solubility and permeability, the lower stability of the methoxy group in the cellular environment may have impacted its cellular activity (not explored). Some compounds with aliphatic rings, such as 5l and 5m, demonstrated good enzymatic and cellular activities. Although both the cyclopropyl and cyclobutyl (5n) groups 1989


ACS Omega

Article

Table 4. SAR of the Substituents at the Aminopyrimidine 2-Position for Compounds 1 and 4a−ua

a


progeny MOLM13FLT3‑ITD/D835Y cells. We also determined the Kd values for compounds 1, 5e, and 6a against several FLT3 mutants (Table 8).62 Compound 5e bound more tightly to all FLT3 variants tested compared with 1, whereas 6a did not bind to any FLT3 variant at any tested concentration. Therefore, there was very good correlation between the improved potency of 5e against MOLM13 cells and improved binding to FLT3 variants.

Interestingly, the fold-difference in the affinities of 5e and 1 was very similar between the FLT3 and Asp835 mutants, which is mirrored by similar potencies in parental and kinase inhibitorresistant MOLM13 cells. This is a desirable profile for a new FLT3 inhibitor scaffold. Previously studied type I kinase inhibitors have also had similar to better affinities for FLT3, FLT3-ITD, or activating TKD mutations, suggesting that these 1990


ACS Omega

Article

Table 5. SAR of the Substituents at the Aminopyrimidine 4-Position for Compounds 5a−ra,b

a

IC50 and EC50 values are reported as the mean of triplicates. Values for CI 95 are included in Table S3. bOn the basis of assay conditions, IC50 values below 6 nM cannot be accurately measured.

would be expected that first-pass metabolism effects could cause low bioavailability. In Vivo Pharmacokinetics. On the basis of the results from the microsomal stability studies of 1, 5e, and 6k, we selected 5e to evaluate in vivo pharmacokinetics at three doses by intraperitoneal (i.p.) injection. A greater than proportional dosedependent increase in Cmax (Table 10) was observed (327, 927, and 1625 nM for 3, 5, and 10 mg/kg respectively) and the halflife of the compound ranged from 0.23 to 1 h, paralleling our observations in mouse microsome models (0.2−1 h at 0.8−20 μM). The area under the concentration−time curve (AUC) within 24 h also displayed a dose-dependent trend. CL, however, was high at all doses tested. Therefore, because of the undesirable pharmacokinetic profile of 5e, we did not pursue efficacy modeling using a human AML xenograft model with this compound because its pharmacokinetic properties could potentially confound the results of such a study.

compounds may have the properties of a type I inhibitor, which binds in the ATP-binding pocket of the kinase.63 Additionally, when selected compounds were evaluated in the Z′LYTE FLT3 kinase inhibition assay under standard conditions but using either a lower (100 μM) or higher (2.5 mM) concentration of ATP, shifts in the FLT3 IC50 values of these compounds were observed. For instance, the IC50 of the initial hit, 1, was reduced to 48 h). Overall, these studies would predict reasonable oral absorption for 5e but rapid clearance (CL) for all three, and it

■

CONCLUSIONS Starting with hit compound 1, we developed a SAR concerning inhibition of FLT3 enzymatic activity and MV4-11 cellular proliferation. Overall, the SAR for enzymatic inhibition and inhibition of cellular proliferation correlated well. We found that the pyrimidine nitrogens and nitrogen linker atoms were important for MV4-11 cellular activity. Inclusion of a 3pyridinylphenyl group at the 2-position and a small aliphatic substituent at the 4-position provided a balance of potency, solubility, and permeability (Figure 4). Additionally, the pan1991


ACS Omega

Article

Table 6. Additional SAR at the Aminopyrimidine 2-Position for Compounds 6a−na,b

a

IC50 and EC50 values are reported as the mean of triplicates. Values for CI 95 are included in Table S3. bOn the basis of assay conditions, IC50 values below 6 nM cannot be accurately measured.

Table 7. Kd Values for 5e

a

kinase

Kd (nM)a

CLK1 CLK4 CSF1R EPHB6 FLT3 JAK1 (JH2 domain-pseudokinase) JAK2 (JH1 domain-catalytic) NEK10 PDGFRB PIK4CB PIP5K1C TYK2 (JH1 domain-catalytic) TYK2 (JH2 domain-pseudokinase)

260 1100 460 440 3.6 28 480 2000 28 330 1300 740 210

suggesting that the scaffold might provide good lead molecules for further development. From these studies, we developed 5e, which not only had improved potency against FLT3 and MV4-11 cells but also demonstrated activity in MOLM13 cells possessing FLT3-ITD and FLT3 inhibitor-resistant TKD mutations. Compound 5e possessed acceptable in vitro ADME properties and was selected for additional preclinical studies. However, because of its low metabolic stability and high CL in pharmacokinetic studies, we determined that these properties need to be improved before further preclinical studies are undertaken. Efforts toward this goal are on-going.

■

EXPERIMENTAL SECTION Chemistry. All chemical reagents were purchased from commercial suppliers (Acros, Combi-Blocks, Enamine, Oakwood, Sigma Aldrich, Strem) and were used without further purification. Solvents were dried using a column-exchange system64 Thin-layer chromatography (TLC) was performed using Merck Millipore silica gel 60G F254 glass plates and visualized using a 254 nm UV lamp for detection. Microwave


activity against FLT3 mutations and the relatively high selectivity for FLT3 were both generally maintained during the SAR studies, 1992


ACS Omega

Article

Figure 2. Relative inhibition of the proliferation of MOLM13 cells carrying either FLT3-ITD or FLT3-ITD with an additional mutation of D835Y by compounds 1, 5e, 6k, and 6a, as evaluated in the MTT assay. Data are expressed as the mean of cell viability measurements ± SE of three experiments, with six replicates each (n = 18), after treatment with drug for 72 h. (IC50 and CI 95 in nM: MOLM13FLT3‑ITD_1 = 620, 461−833; MOLM13FLT3‑ITD/D835Y_1 = 1153, 869−1604; MOLM13FLT3‑ITD_5e = 136, 112−164; MOLM13FLT3‑ITD/D835Y_5e = 82, 66−103; MOLM13FLT3‑ITD_6k = 45, 38−55; MOLM13FLT3‑ITD/D835Y_6k = 77, 63−94; MOLM13FLT3‑ITD_6a = >10 000; MOLM13FLT3‑ITD/D835Y_6a = 4260, 3060−5930.)

rotations were recorded using a Jasco P-1010 polarimeter at the D line of sodium (λ, 589 nM). Purity was assessed using ultraperformance liquid chromatography mass spectrometry (UPLC−MS; Acquity PDA detector, Acquity SQ detector, and Acquity UPLC BEH-C18 column, 1.7 μm, 2.1 × 50 mm2; Waters Corp.). Data were acquired using Masslynx, version 4.1. The flow rate was 0.5 mL/min, and the gradient started with 95% A (0.1% formic acid in H2O), changed to 95% B (0.1% formic acid in acetonitrile), and then returned to 95% A. The mass spectrometer was operated in the positive-ion mode with electrospray ionization. Verification of enantiopurity was conducted using supercritical fluid chromatography with a Chiralcel OD-H (4.6 × 250 mm2) or Chiralcel AD-H (4.6 × 250 mm2) column. The compounds were purified to ≥95% purity and assessed using LC/MS by UV/evaporative light scattering detector detection, unless stated otherwise, and efficacy data were obtained only on compounds that were ≥95% pure. 2-Chloro-N-cyclohexylpyrimidin-4-amine (3a). To a suspension of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) in DCM (20 mL, 0.50 M) under a nitrogen atmosphere was added cyclohexylamine (20 mmol, 2.0 equiv) at rt. After stirring for 16 h at rt, the reaction mixture was concentrated and purified directly using automated flash chromatography (ethyl acetate (EtOAc)/ hexanes), followed by evaporation, giving 3a as a white solid (1.2 g, 57%). TLC Rf 0.30 (30% EtOAc/hexanes). LC−MS (ESI) m/ z: 214 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.02 (s, 1H), 6.22 (d, J = 6.0 Hz, 1H), 5.20 (br s, 1H), 3.42 (br s, 1H), 2.08− 1.93 (m, 2H), 1.77 (dt, J = 13.6, 4.0 Hz, 2H), 1.67 (dt, J = 12.9, 4.1 Hz, 1H), 1.38−1.44 (m, 2H), 1.32−1.13 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 162.76, 160.83, 157.41, 100.54, 50.12, 32.68, 25.37, 24.51. N4-Cyclohexyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4diamine (1). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 1 as a white film (0.002 g, 6%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 346 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.90−8.75 (s, 1H), 8.54 (d, J = 5.0 Hz, 1H), 8.11 (dt, J = 7.8, 2.0 Hz, 2H), 7.73 (s, 1H), 7.64 (d, J = 10 Hz, 1H), 7.54 (dd, J = 7.9, 4.9 Hz, 1H), 7.41 (t, J = 7.9 Hz, 1H), 7.25 (d, J = 10 Hz, 1H), 5.95 (d, J = 6.0 Hz, 1H), 3.84 (br s,

Figure 3. Inhibition of FLT3 signaling by compounds 5e and 6k. MOLM13FLT3‑ITD cells were treated for 1 h with dimethyl sulfoxide (DMSO) or increasing concentrations of (A) compound 5e or (B) compound 6k and lysed. Western blot analysis was performed on the FLT3 immunoprecipitation eluent or the whole-cell lysate using the indicated antibodies.

Table 8. Kd Values for 1, 5e, and 6a Bound to Mutant FLT3 Kinases

a

kinase

1 Kd (nM)a

5e Kd (nM)a

6a Kd (nM)a

FLT3 FLT3 (D835H) FLT3 (D835V) FLT3 (D835Y) FLT3 (ITD) FLT3 (ITD, D835V) FLT3 (ITD, F691L) FLT3 (K663Q) FLT3 (N841I) FLT3 (R834Q) FLT3-autoinhibited

61 22 7.7 13 31 7.2 270 110 48 680 1100

3.6 1.2 0.8 0.59 1.4 0.36 11 13 11 82 78

>10 000 >10 000 >10 000 >10 000 >10 000 >10 000 >10 000 >10 000 >10 000 >10 000 >10 000


experiments were carried out using a Biotage Initiator system. Automated flash chromatography was performed using the Biotage SP1 flash column system with silica gel SNAP columns or C18 SNAP columns for reversed-phase purifications.65 Rf values are quoted for the eluent system stated. Evaporation was carried out using a Büchi Rotovapor. NMR spectra were recorded on either a Bruker 400 MHz or Bruker 500 MHz spectrometer in the solvents indicated, and the spectra were processed using MestReNova (8.1) referenced to the solvent peak. Melting points were obtained using a Büchi-545. Optical 1993


ACS Omega

Article

Table 9. Physicochemical Properties of 1, 5e, and 6k in vitro properties solubility (μM)a permeability (10−6 cm/s)a liver microsome stability at 4 μM t1/2 (h)a

pH = 7.4 mouse rat dog human mouse rat dog human mouse rat human pH = 7.4 pH = 5.0 pH = 3.0

liver microsome stability Clint at 4 μM (mL/min/kg)a

plasma stability (h)a

PBS stability (h)a

SGF stability (h)a a

1

5e

6k

0.4 ± 0.9 1880 ± 170 0.26 ± 0.03 1.04 ± 0.03 0.7 ± 0.1 0.8 ± 0.1 26.5 ± 1.6 44.9 ± 1.4 49.4 ± 3.9 26.6 ± 2.2 N.D.b N.D.b N.D.b N.D.b N.D.b N.D.b N.D.b

26.4 ± 17.0 2000 ± 190 0.30 ± 0.03 1.1 ± 0.1 1.2 ± 0.1 2.1 ± 0.1 179.6 ± 19.4 41.7 ± 2.7 28.2 ± 1.9 10.0 ± 0.6 >48 >48 >48 >48 >48 >48 >48

56.9 ± 1.9 1870 ± 60 0.118 ± 0.003 0.38 ± 0.01 0.90 ± 0.02 1.46 ± 0.10 485.3 121.98 37.03 14.22 >50 >50 >50 N.D.b N.D.b N.D.b N.D.b

Values are the mean of a single triplicate experiment. bN.D. means not determined.

1H), 6.60 (d, J = 7.4 Hz, 1H), 6.18 (d, J = 8.2 Hz, 1H), 4.64−4.47 (br s, 1H), 3.41−3.26 (m, 1H), 1.89−1.96 (m, 2H), 1.72−1.61 (m, 2H), 1.53−1.59 (m, 1H), 1.39−1.23 (m, 2H), 1.23−1.05 (m, 3H). 13C NMR (101 MHz, CDCl3) δ 158.14, 140.32, 139.48, 115.22, 104.14, 50.36, 32.99, 25.66, 24.69. N2-Cyclohexyl-N6-(3-(pyridin-3-yl)phenyl)pyridine-2,6-diamine (9). A mixture of 8 (0.078 mmol, 1.0 equiv), 3-(pyridin-3yl)aniline (0.10 mmol, 1.3 equiv), sodium t-butoxide (0.39 mmol, 5.0 equiv), Pd2(dba)3 (0.005 mmol, 7 mol %), and RBINAP (0.012 mmol, 15 mol %) was stirred in toluene (1.0 mL, 0.078 M) at 80 °C under a nitrogen atmosphere for 16 h; it was then cooled to rt. The reaction mixture was then diluted with EtOAc (3 mL) and washed with brine (2 × 3 mL). The organic phase was dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 9 as a yellow oil (0.015 g, 56%). TLC Rf 0.70 (80% EtOAc/hexanes). LC−MS (ESI) m/z: 345 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.79 (s, 1H), 8.51 (s, 1H), 8.13−7.96 (m, 2H), 7.60 (d, J = 8.4 Hz, 1H), 7.58−7.48 (m, 1H), 7.34 (t, J = 8.0 Hz, 1H), 7.26−7.18 (m, 1H), 7.11 (d, J = 7.7 Hz, 1H), 6.02 (d, J = 8.1 Hz, 1H), 5.90 (d, J = 8.0 Hz, 1H), 3.77−3.59 (m, 1H), 2.11−1.93 (m, 2H), 1.75−1.59 (m, 2H), 1.54−1.68 (m, 1H), 1.15−1.22 (m, 5H). 13C NMR (126 MHz, MeOD) δ 157.57, 157.53, 154.95, 154.91, 147.07, 143.20, 138.20, 138.10, 138.00, 137.89, 137.66, 135.29, 129.00, 124.03, 118.50, 117.77, 116.36, 97.90, 97.88, 96.85, 96.83, 49.80, 33.06, 25.60, 24.87. 2-Chloro-N-cyclohexylpyridin-4-amine (11). A mixture of 4bromo-2-chloropyridine 10 (4.0 mmol, 1.0 equiv), cyclohexylamine (6.4 mmol, 1.6 equiv), and triethylamine (4.8 mmol, 1.2 equiv) was stirred at 80 °C in NMP (2.0 mL, 2.0 M) under a nitrogen atmosphere for 16 h. The reaction mixture was cooled to rt and then partitioned between EtOAc (3 mL) and water (3 mL). The organic phase was washed with brine (3 mL), dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 11 as an orange solid (0.123 g, 15%). TLC Rf 0.40 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 211 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 7.92 (d, J = 5.8 Hz, 1H), 6.43 (s, 1H), 6.33 (dd, J = 5.8, 2.2 Hz, 1H), 4.26 (d, J = 7.8 Hz, 1H), 3.34−3.22 (m, 1H), 2.13−1.94 (m, 2H), 1.88−1.74

Table 10. Pharmacokinetic Parameters in Mice for Compound 5e (i.p. Dosing) dose (mg/kg)

3

5

10

Cmax (nM) Tmax (h) T1/2 (h) AUC (nM h) Vz (L/kg) Cl (L/h/kg)

376 0.083 0.23 183.3 16.7 50.7

927 0.083 0.54 683.1 18.6 23.8

1650 0.25 1 953.3 47.3 33.1

Figure 4. Summary of SAR.

1H), 1.98 (dd, J = 9.4, 4.8 Hz, 2H), 1.67−1.69 (m, 2H), 1.56 (s, 1H), 1.28−1.06 (m, 5H). 13C NMR (126 MHz, MeOD) δ 162.32, 159.48, 153.10, 147.23, 147.10, 141.42, 137.93, 137.65, 135.32, 128.98, 124.06, 120.04, 119.00, 117.79, 97.65, 49.23, 32.43, 25.34, 24.72. 6-Bromo-N-cyclohexylpyridin-2-amine (8). A mixture of 2,6dibromopyridine 7 (1.0 mmol, 1.0 equiv), cyclohexylamine (1.6 mmol, 1.6 equiv), and triethylamine (1.2 mmol, 1.2 equiv) was stirred at 100 °C in NMP (1.0 mL, 1.0 M) under a nitrogen atmosphere for 21 h; it was then cooled to rt. The reaction mixture was partitioned between EtOAc (3 mL) and water (3 mL). The organic phase was washed with brine (3 mL), dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 8 as a colorless oil (0.026 g, 10%). TLC Rf 0.50 (10% EtOAc/hexanes). LC−MS (ESI) m/z: 257 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 7.22−7.07 (m, 1994


ACS Omega

Article

methylaminocyclohexane (5.0 mmol, 1.0 equiv), and triethylamine (5.5 mmol, 1.1 equiv) was stirred in EtOH (7.0 mL, 0.71 M) under a nitrogen atmosphere at reflux temperature for 5 h. The reaction mixture was then cooled to rt and concentrated. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 15 as a white solid (0.67 g, 59%). TLC Rf 0.50 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 228 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.00 (d, J = 6.2 Hz, 1H), 6.46−6.17 (m, 1H), 4.72 (br s, 1H), 2.93 (br s, 3H), 1.97−1.80 (m, 2H), 1.83−1.61 (m, 3H), 1.43−1.52 (m, 4H), 1.23−1.05 (m, 1H). 13C NMR (126 MHz, CDCl3) δ 162.58, 160.52, 156.66, 101.31, 29.82, 25.63, 25.48. N 4 -Cyclohexyl-N 4 -methyl-N 2 -(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (16). To a mixture of 15 (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(3-pyridyl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 16 as a colorless oil (0.009 g, 25%). TLC Rf 0.1 (70% EtOAc/hexanes). LC−MS (ESI) m/z: 360 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.86 (d, J = 2.3 Hz, 1H), 8.58 (dd, J = 4.8, 1.6 Hz, 1H), 7.94−7.84 (m, 2H), 7.61 (d, J = 8.7 Hz, 2H), 7.40 (t, J = 7.9 Hz, 1H), 7.35 (dd, J = 7.9, 4.8 Hz, 1H), 7.19 (d, J = 5.0, 1H), 5.98 (d, J = 6.3 Hz, 1H), 4.28 (br s, 2H), 2.92 (s, 3H), 1.84−1.72 (m, 2H), 1.70 (d, J = 3.9 Hz, 2H), 1.67−1.56 (m, 1H), 1.45 (q, J = 11.9, 11.1 Hz, 2H), 1.19−1.25 (m, 2H), 1.14−1.00 (m, 1H). 13C NMR (126 MHz, CDCl3) δ 162.03, 158.45, 154.29, 148.46, 148.44, 140.76, 138.53, 137.01, 134.49, 129.36, 123.47, 120.79, 118.85, 117.89, 95.37, 54.65, 30.01, 29.47, 25.75, 25.55. N 4 -Cyclohexyl-N 2 -methyl-N 2 -(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (21). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added N-methyl-3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 21 as a red oil (0.002 g, 6%). TLC Rf 0.2 (10% MeOH/ DCM). LC−MS (ESI) m/z: 360 [M + H]+. 1H NMR (400 MHz, MeOD) δ 10.18 (t, J = 1.7 Hz, 1H), 10.00 (dt, J = 6.3, 1.4 Hz, 1H), 9.05 (dt, J = 8.1, 1.6 Hz, 1H), 8.31 (dd, J = 8.1, 6.3 Hz, 1H), 8.25 (d, J = 6.0 Hz, 1H), 7.38 (t, J = 7.9 Hz, 1H), 7.03−7.08 (m, 1H), 7.02 (t, J = 2.1 Hz, 1H), 6.89−6.79 (m, 1H), 6.73 (d, J = 6.0 Hz, 1H), 4.22−3.97 (m, 1H), 2.89 (s, 3H), 2.11 (d, J = 13.3 Hz, 2H), 1.87 (dt, J = 13.0, 3.7 Hz, 2H), 1.74 (dt, J = 12.9, 3.8 Hz, 1H), 1.58−1.27 (m, 5H). 13C NMR (101 MHz, MeOD) δ 163.12, 149.09, 148.41, 139.93, 137.95, 136.60, 131.55, 127.82, 127.13, 126.40, 125.55, 76.82, 51.05, 39.06, 33.48, 26.68, 26.09. N4-Cyclohexyl-N2,N4-dimethyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (17). To a mixture of 15 (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added N-methyl-3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 17 as an orange oil (0.010 g, 27%). TLC Rf 0.4 (10% MeOH/DCM). LC−MS (ESI) m/z: 374 [M + H]+. 1H NMR (500 MHz, MeOD) δ 10.19 (s, 1H), 10.01 (d, J = 7.4 Hz, 1H), 9.06 (d, J = 8.1 Hz, 1H), 8.42 (t, J = 7.2 Hz, 1H), 8.33 (t, J = 7.2 Hz, 1H), 7.38 (t, J = 7.9 Hz, 1H), 7.08 (d, J = 7.5 Hz, 1H), 7.03 (s,

(m, 2H), 1.74−1.61 (m, 1H), 1.47−1.32 (m, 2H), 1.32−1.12 (m, 3H). 13C NMR (101 MHz, CDCl3) δ 154.37, 152.16, 149.16, 107.41, 106.04, 51.03, 32.81, 25.54, 24.72. N4-cyclohexyl-N2-(3-(pyridin-3-yl)phenyl)pyridine-2,4-diamine (13). A mixture of 11 (0.20 mmol, 1.0 equiv), 3-(pyridin-3yl)aniline (0.25 mmol, 1.3 equiv), sodium t-butoxide (0.97 mmol, 5.0 equiv), Pd2(dba)3 (0.014 mmol, 7 mol %), and RBINAP (0.029 mmol, 0.15 mmol) was stirred in DMF (1.0 mL, 0.20 M) at 140 °C under microwave irradiation at 35 W for 1 h. The reaction mixture was then cooled to rt, diluted with EtOAc (5 mL), and washed with brine (5 mL). The organic phase was dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (MeOH/ CH2Cl2) was followed by evaporation, giving 13 as a brown oil (0.016 g, 24%). TLC Rf 0.3 (10% MeOH/CH2Cl2). LC−MS (ESI) m/z: 345 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.81 (s, 1H), 8.61−8.56 (m, 1H), 7.86 (dt, J = 7.9, 2.3 Hz, 1H), 7.57− 7.50 (m, 1H), 7.48−7.42 (m, 2H), 7.35−7.38 (m, 1H), 7.27− 7.32 (m, 2H), 6.12 (dd, J = 6.6, 2.1 Hz, 1H), 6.02 (s, 1H), 5.21 (d, J = 7.6 Hz, 1H), 3.27−3.14 (m, 1H), 1.92−1.97 (m, 2H), 1.76− 1.68 (m, 2H), 1.59−1.61 (m, 1H), 1.16−1.30 (m, 5H). 13C NMR (101 MHz, CDCl3) δ 155.68, 153.72, 148.79, 148.15, 140.43, 139.34, 139.26, 135.98, 134.40, 130.21, 123.64, 123.14, 121.73, 120.74, 102.29, 87.65, 51.48, 32.59, 25.36, 24.58. 4-Bromo-N-cyclohexylpyridin-2-amine (12). A mixture of 4bromo-2-chloropyridine 10 (1.0 mmol, 1.0 equiv), cyclohexylamine (1.6 mmol, 1.6 equiv), and triethylamine (1.2 mmol, 1.2 equiv) was stirred at 80 °C in NMP (1.0 mL, 1.0 M) under a nitrogen atmosphere for 16 h. The reaction mixture was cooled to rt and then partitioned between EtOAc (3 mL) and water (3 mL). The organic phase was washed with brine (3 mL), dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 12 as a colorless oil (0.006 g, 2%). TLC Rf 0.75 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 255 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 7.88 (d, J = 5.5 Hz, 1H), 6.69 (dd, J = 5.5, 1.6 Hz, 1H), 6.55 (d, J = 1.6 Hz, 1H), 4.64 (s, 1H), 3.59−3.42 (m, 1H), 2.08−1.98 (m, 2H), 1.85−1.71 (m, 2H), 1.67 (dt, J = 12.7, 3.9 Hz, 1H), 1.53−1.33 (m, 2H), 1.33−1.14 (m, 3H). 13C NMR (101 MHz, CDCl3) δ 158.62, 148.77, 133.60, 115.61, 109.24, 50.28, 33.17, 25.68, 24.79. N2-Cyclohexyl-N4-(3-(pyridin-3-yl)phenyl)pyridine-2,4-diamine (14). A mixture of 12 (0.067 mmol, 1.0 equiv), 3-(pyridin3-yl)aniline (0.087 mmol, 1.3 equiv), sodium t-butoxide (0.33 mmol, 5.0 equiv), Pd2(dba)3 (0.0047 mmol, 7 mol %), and RBINAP (0.010 mmol, 15 mol %) was stirred in toluene (1.0 mL, 0.067 M) at 80 °C under a nitrogen atmosphere. After 16 h, the reaction mixture was cooled to rt, diluted with EtOAc (3 mL), and washed with brine (2 × 3 mL). The organic phase was dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 14 as a white oil (0.002 g, 9%). TLC Rf 0.2 (10% MeOH/DCM). LC−MS (ESI) m/z: 345 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.84 (s, 1H), 8.58 (s, 1H), 8.14 (d, J = 5.0 Hz, 1H), 7.68−7.46 (m, 5H), 7.39−7.30 (d, J = 5.0 Hz, 1H), 6.44 (dd, J = 7.0, 2.2 Hz, 1H), 6.25 (s, 1H), 3.40− 3.44 (m, 1H), 1.99 (d, J = 15.0 Hz, 2H), 1.77−1.83 (m, 2H), 1.68 (dt, J = 12.8, 3.8 Hz, 1H), 1.37−1.46 (m, 2H), 1.24−1.34 (m, 3H). 13C NMR (126 MHz, MeOD) δ 154.89, 153.53, 147.83, 146.98, 139.59, 138.87, 136.95, 136.53, 135.22, 130.27, 124.16, 123.63, 122.39, 121.05, 102.81, 88.10, 50.49, 32.29, 25.05, 24.37. 2-Chloro-N-cyclohexyl-N-methylpyrimidin-4-amine (15). A mixture of 2,4-dichloropyrimidine 2 (5.0 mmol, 1.0 equiv), N1995


ACS Omega

Article

J = 2.0 Hz, 1H), 6.98−6.88 (m, 1H), 6.84 (d, J = 5.0 Hz, 1H), 3.95 (s, 1H), 3.09−3.26 (m, 3H), 2.89 (s, 3H), 2.02−1.89 (m, 2H), 1.83−1.86 (m, 2H), 1.67−1.77 (m, 3H), 1.56 (qt, J = 13.2, 3.6 Hz, 2H), 1.38−1.23 (m, 1H). 13C NMR (126 MHz, MeOD) δ 162.46, 156.01, 155.64, 151.30, 146.51, 141.80, 138.18, 137.88, 134.24, 130.11, 127.39, 114.72, 114.23, 109.54, 105.17, 55.20, 29.23, 29.05, 25.53, 25.14. 2-Chloro-4-(cyclohexyloxy)pyrimidine (18). To a solution of cyclohexanol (6.0 mmol, 1.2 equiv) in DMF (10 mL, 0.60 M) at 0 °C was added NaH as a 60% suspension in mineral oil (7.5 mmol, 1.5 equiv). After stirring for 20 min, 2,4-dichloropyrimidine 2 (5.0 mmol, 1.0 equiv) was added at 0 °C to one portion. The reaction mixture was then stirred under a nitrogen atmosphere while warming to rt over 16 h. Brine (20 mL) was added to the reaction mixture; then, the mixture was extracted into EtOAc (2 × 20 mL). The organic phase was dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 18 as a white solid (0.031 g, 3%). TLC Rf 0.35 (10% EtOAc/hexanes). LC−MS (ESI) m/z: 213 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.18 (d, J = 5.7 Hz, 1H), 6.53 (d, J = 5.7 Hz, 1H), 5.17−4.97 (m, 1H), 2.00−1.84 (m, 2H), 1.78−1.63 (m, 2H), 1.56−1.49 (m, 2H), 1.35−1.48 (m, 3H), 1.19−1.34 (m, 1H). 13C NMR (101 MHz, CDCl3) δ 170.02, 160.21, 158.63, 107.61, 75.52, 31.32, 25.36, 23.60. 4-(Cyclohexyloxy)-N-(3-(pyridin-3-yl)phenyl)pyrimidin-2amine (19). To a mixture of 18 (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 19 as an orange oil (0.003 g, 9%). TLC Rf 0.3 (10% MeOH/DCM). LC−MS (ESI) m/z: 347 [M + H]+. 1H NMR (500 MHz, MeOD) δ 10.17 (d, J = 1.8 Hz, 1H), 10.02 (dt, J = 6.3, 1.8 Hz, 1H), 9.09 (dt, J = 8.1, 2.2 Hz, 1H), 8.79 (t, J = 6.1 Hz, 1H), 8.37 (dd, J = 8.0, 6.3 Hz, 1H), 7.36 (t, J = 7.8 Hz, 1H), 7.27−7.07 (m, 3H), 6.94 (dd, J = 8.0, 2.3 Hz, 1H), 5.40−5.45 (m, 1H), 2.13−2.18 (m, 2H), 1.96−1.83 (m, 2H), 1.70−1.78 (m, 3H), 1.65−1.53 (m, 2H), 1.44−1.49 (m, 1H). 13C NMR (126 MHz, MeOD) δ 171.00, 159.02, 154.69, 149.51, 147.06, 141.78, 138.57, 138.14, 134.01, 130.30, 127.67, 116.71, 115.78, 112.77, 111.06, 77.04, 30.86, 25.03, 23.13. N-Cyclohexyl-2-(3-(pyridin-3-yl)phenoxy)pyrimidin-4amine (22). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)phenol (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 16 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 22 as a yellow oil (0.028 g, 81%). TLC Rf 0.1 (10% MeOH/DCM). LC−MS (ESI) m/z: 347 [M + H]+. 1H NMR (500 MHz, MeOD) δ 10.19 (d, J = 9.9 Hz, 1H), 10.01 (d, J = 10.0 Hz, 1H), 9.05 (d, J = 9.1 Hz, 1H), 8.29 (dt, J = 41.0, 6.6 Hz, 2H), 7.46 (t, J = 9.8 Hz, 1H), 7.40−7.23 (m, 2H), 7.04 (d, J = 9.0 Hz, 1H), 6.82−6.65 (m, 1H), 4.10 (m, 1H), 2.11 (m, 2H), 2.00− 1.81 (m, 2H), 1.73 (m, 1H), 1.64−1.26 (m, 5H). 13C NMR (126 MHz, MeOD) δ 162.96, 158.68, 154.25, 146.51, 140.85, 138.31, 137.88, 134.78, 130.67, 127.49, 117.99, 117.09, 113.84, 107.95, 49.88, 31.93, 25.33, 24.58. 4-(Cyclohexyloxy)-2-(3-(pyridin-3-yl)phenoxy)pyrimidine (20). To a mixture of 18 (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-

(pyridin-3-yl)phenol (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 16 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 20 as a yellow solid (0.018 g, 52%). TLC Rf 0.3 (10% MeOH/DCM). LC−MS (ESI) m/z: 348 [M + H]+. 1 H NMR (400 MHz, MeOD) δ 10.19 (t, J = 1.7 Hz, 1H), 10.05 (dt, J = 6.4, 1.4 Hz, 1H), 9.13 (ddd, J = 8.1, 2.0, 1.2 Hz, 1H), 8.79 (d, J = 5.8 Hz, 1H), 8.39 (dd, J = 8.1, 6.4 Hz, 1H), 7.48 (t, J = 7.9 Hz, 1H), 7.36 (ddd, J = 7.7, 1.9, 1.0 Hz, 1H), 7.31 (t, J = 2.1 Hz, 1H), 7.21 (d, J = 5.8 Hz, 1H), 7.06 (ddd, J = 8.2, 2.4, 0.9 Hz, 1H), 5.42−5.45 (m, 1H), 2.25−2.07 (m, 2H), 1.86−1.92 (m, 2H), 1.67−1.78 (m, 3H), 1.64−1.52 (m, 2H), 1.44−1.49 (m, 1H). 13C NMR (101 MHz, MeOD) δ 172.42, 160.45, 160.12, 148.65, 142.60, 140.21, 139.72, 136.02, 132.14, 129.17, 119.49, 118.62, 115.32, 112.51, 78.48, 32.28, 26.45, 24.56. N4-Cyclohexyl-N2-phenylpyrimidine-2,4-diamine (4a). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added aniline (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 1.5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4a as a white solid (0.018 g, 67%). TLC Rf 0.7 (10% MeOH/DCM). LC−MS (ESI) m/z: 269 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 7.90−7.72 (m, 1H), 7.53 (d, J = 7.9 Hz, 2H), 7.25−7.20 (m, 2H), 7.19 (br s, 1H), 6.92 (t, J = 7.4 Hz, 1H), 5.75 (d, J = 5.9 Hz, 1H), 4.71 (br s, 1H), 3.60 (br s, 1H), 2.05− 1.92 (m, 2H), 1.69−1.75 (m, 2H), 1.58−1.62 (m, 1H), 1.29− 1.38 (m, 2H), 1.21−1.08 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 162.03, 159.44, 139.97, 128.73, 121.97, 119.23, 50.07, 33.09, 25.62, 24.93. N2-([1,1′-Biphenyl]-2-yl)-N4-cyclohexylpyrimidine-2,4-diamine (4b). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 2-aminobiphenyl (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 1.5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4b as a colorless oil (0.023 g, 67%). TLC Rf 0.45 (5% MeOH/DCM). LC−MS (ESI) m/z: 345 [M + H]+. 1 H NMR (400 MHz, CDCl3) δ 8.35 (d, J = 8.3 Hz, 1H), 7.78 (s, 1H), 7.51−7.39 (m, 4H), 7.32−7.37 (m, 2H), 7.29−7.20 (m, 2H), 7.09 (td, J = 7.5, 1.2 Hz, 1H), 5.81 (d, J = 6.0 Hz, 1H), 4.97 (br s, 1H), 3.60 (br s, 1H), 1.98−2.04 (m, 2H), 1.74−1.80 (m, 2H), 1.63−1.68 (m, 1H), 1.44−1.29 (m, 2H), 1.15−1.27 (m, 3H). 13C NMR (101 MHz, CDCl3) δ 161.95, 138.81, 136.42, 132.54, 130.24, 129.40, 128.92, 127.85, 127.59, 122.62, 121.18, 50.14, 33.00, 25.56, 24.87. N4-Cyclohexyl-N2-(3-cyclopropylphenyl)pyrimidine-2,4-diamine (4c). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-cyclopropylaniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 4 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4c as a white oil (0.009 g, 29%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 309 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 7.76 (d, J = 6.2 Hz, 1H), 7.35−7.37 (m, 2H), 7.20 (s, 1H), 7.10 (t, J = 7.9 Hz, 1H), 6.63 (d, J = 5.0 Hz, 1H), 5.76 (d, J = 6.0 Hz, 1H), 4.88 (d, J = 8.0 Hz, 1H), 3.77−3.46 (m, 1H), 1.95−2.00 (m, 2H), 1.80−1.83 (m, 1H), 1.70 (dt, J = 13.6, 3.9 Hz, 2H), 1.59 (dt, J = 13.0, 3.8 Hz, 1H), 1.40−1.24 (m, 1996


ACS Omega

Article

NMR (400 MHz, CDCl3) δ 7.84 (s, 2H), 7.59−7.62 (m, 3H), 7.43 (dd, J = 8.2, 6.9 Hz, 2H), 7.37−7.31 (m, 2H), 7.23 (dt, J = 7.7, 1.4 Hz, 1H), 5.86 (d, J = 6.0 Hz, 1H), 4.97 (d, J = 8.0 Hz, 1H), 3.71 (s, 1H), 2.10−1.92 (m, 2H), 1.77−1.64 (m, 2H), 1.59 (d, J = 11.9 Hz, 1H), 1.36−1.09 (m, 5H). 13C NMR (101 MHz, CDCl3) δ 162.02, 142.00, 141.39, 140.04, 129.07, 128.67, 127.28, 121.29, 118.42, 50.06, 33.02, 25.53, 24.73. N4-Cyclohexyl-N2-(3-(pyridin-2-yl)phenyl)pyrimidine-2,4diamine (4h). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-2-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4h as a white film (0.007 g, 20%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 346 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.74−8.58 (m, 1H), 8.27 (s, 1H), 7.95 (td, J = 7.7, 1.8 Hz, 1H), 7.89−7.94 (m, 1H), 7.73 (d, J = 7.4 Hz, 1H), 7.70−7.63 (m, 1H), 7.60−7.55 (m, 1H), 7.52 (t, J = 7.8 Hz, 1H), 7.41−7.43 (m, 1H), 6.14 (d, J = 7.0 Hz, 1H), 3.90 (s, 1H), 2.06−1.89 (m, 2H), 1.74−1.60 (m, 2H), 1.60−1.49 (m, 1H), 1.30−1.21 (m, 2H), 1.21−1.05 (m, 3H). 13C NMR (126 MHz, MeOD) δ 161.97, 157.24, 154.20, 149.00, 143.49, 140.02, 138.14, 137.66, 122.94, 122.63, 122.01, 121.48, 120.39, 98.62, 50.18, 31.86, 25.07, 24.52. N 4 -Cyclohexyl-N 2 -(3′-methoxy-[1,1′-biphenyl]-3-yl)pyrimidine-2,4-diamine (4i). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added (3′-methoxybiphenyl-3-yl)amine HCl (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 4i as a colorless oil (0.007 g, 19%). TLC Rf 0.2 (50% EtOAc/ hexanes + 1% MeOH). LC−MS (ESI) m/z: 375 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 7.98−7.89 (m, 1H), 7.85 (s, 1H), 7.63−7.65 (m, 1H), 7.35−7.37 (m, 2H), 7.21−7.24 (m, 2H), 7.18 (s, 1H), 7.15−7.16 (m, 1H), 6.90−6.93 (m, 1H), 5.85 (d, J = 5.9 Hz, 1H), 4.71 (s, 1H), 3.89 (s, 3H), 3.84−3.57 (m, 1H), 2.03−2.07 (m, 2H), 1.81−1.68 (m, 2H), 1.68−1.56 (m, 1H), 1.39−1.27 (m, 2H), 1.17−1.25 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 162.06, 159.85, 159.82, 155.82, 143.05, 141.85, 140.49, 129.64, 129.03, 120.89, 119.83, 118.28, 118.07, 112.97, 112.67, 95.81, 55.30, 49.85, 33.12, 25.61, 24.74. Methyl 3′-((4-(cyclohexylamino)pyrimidin-2-yl)amino)[1,1′-biphenyl]-3-carboxylate (4j). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3′-aminobiphenyl-3-carboxylic acid methyl ester HCl (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4j as a white solid (0.012 g, 30%). TLC Rf 0.2 (50% EtOAc/hexanes + 1% MeOH). LC−MS (ESI) m/z: 375 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.31 (t, J = 1.8 Hz, 1H), 8.04 (dt, J = 7.8, 1.4 Hz, 1H), 7.97−7.87 (m, 2H), 7.82 (ddd, J = 7.8, 1.9, 1.2 Hz, 1H), 7.64 (ddd, J = 8.1, 2.3, 1.0 Hz, 1H), 7.53 (t, J = 7.7 Hz, 1H), 7.40 (t, J = 7.9 Hz, 1H), 7.26 (ddd, J = 7.7, 1.8, 1.0 Hz, 1H), 7.20 (s, 1H), 5.86 (d, J = 5.9 Hz, 1H), 4.74 (br s, 1H), 3.97 (br s, 3H), 3.86−3.56 (m, 1H), 2.11−1.99 (m, 2H), 1.78−1.67 (m, 2H), 1.61 (d, J = 11.2 Hz, 1H), 1.36−1.13 (m, 5H). 13C NMR (126 MHz, CDCl3) δ 167.09, 162.04, 159.62, 155.39, 141.74, 140.83, 140.59, 131.68, 130.59, 129.22, 128.77,

2H), 1.24−1.09 (m, 3H), 0.91−0.79 (m, 2H), 0.70−0.56 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 162.02, 158.97, 153.51, 144.68, 139.65, 128.60, 119.35, 117.17, 116.73, 96.62, 49.98, 33.06, 25.58, 24.88, 15.58, 9.15. N4-Cyclohexyl-N2-(3-fluorophenyl)pyrimidine-2,4-diamine (4d). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) at rt were added 3-fluoroaniline (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 1.5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4d as a white solid (0.018 g, 63%). TLC Rf 0.7 (10% MeOH/DCM). LC−MS (ESI) m/z: 287 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 7.90 (d, J = 6.0 Hz, 1H), 7.78 (d, J = 12.0 Hz, 1H), 7.30 (s, 1H), 7.19 (dd, J = 8.2, 6.7 Hz, 1H), 7.07 (dd, J = 8.1, 2.1 Hz, 1H), 6.66 (td, J = 8.3, 2.5 Hz, 1H), 5.85 (d, J = 5.8 Hz, 1H), 4.76 (br s, 1H), 3.72 (br s, 1H), 2.16−2.00 (m, 2H), 1.77−1.81 (m, 2H), 1.66−1.70 (m, 1H), 1.50−1.35 (m, 2H), 1.19−1.27 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 164.17, 162.25, 161.98, 159.34, 141.88, 141.79, 129.65, 129.57, 114.11, 114.08, 108.21, 108.04, 106.15, 105.93, 50.12, 33.11, 25.62, 24.90. N 4-Cyclohexyl-N2 -(pyridin-3-yl)pyrimidine-2,4-diamine (4e). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3aminopyridine (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 1.5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4e as a yellow oil (0.023 g, 85%). TLC Rf 0.4 (10% MeOH/DCM). LC−MS (ESI) m/z: 270 [M + H]+. 1H NMR (400 MHz, MeOD) δ 9.29 (d, J = 2.3 Hz, 1H), 9.17 (dt, J = 5.1, 1.7 Hz, 1H), 8.17 (d, J = 6.0 Hz, 1H), 7.95−7.76 (m, 2H), 6.67 (d, J = 6.0 Hz, 1H), 4.22−3.98 (m, 1H), 2.11−1.96 (m, 2H), 1.82−1.87 (m, 2H), 1.78−1.66 (m, 1H), 1.48−1.55 (m, 2H), 1.44−1.19 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 166.85, 159.11, 158.07, 152.94, 134.51, 131.01, 128.10, 111.57, 53.28, 35.98, 29.22, 28.41. Methyl 3-((4-(cyclohexylamino)pyrimidin-2-yl)amino)benzoate (4f). To a mixture of 3a (0.10 mmol, 1.0 equiv) in MeOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-aminobenzoic acid methyl ester (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4f as a colorless oil (0.018 g, 55%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 327 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.21 (s, 1H), 7.98−7.82 (m, 2H), 7.66 (d, J = 5.0 Hz, 1H), 7.61 (s, 1H), 7.35 (t, J = 7.9 Hz, 1H), 5.86 (d, J = 5.9 Hz, 1H), 4.88 (br s, 1H), 3.91 (s, 3H), 3.08 (br s, 1H), 2.11−1.96 (m, 2H), 1.76 (dt, J = 13.7, 3.9 Hz, 2H), 1.70−1.60 (m, 1H), 1.47− 1.31 (m, 2H), 1.19−1.25 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 167.13, 162.02, 159.21, 154.87, 140.20, 130.65, 128.74, 123.60, 123.02, 120.18, 52.12, 49.94, 33.05, 25.60, 24.80. N2-([1,1′-Biphenyl]-3-yl)-N4-cyclohexylpyrimidine-2,4-diamine (4g). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-aminobiphenyl (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 1.5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4g as a white solid (0.018 g, 52%). TLC Rf 0.5 (5% MeOH/DCM). LC−MS (ESI) m/z: 345 [M + H]+. 1H 1997


ACS Omega

Article

Hz, 1H), 8.75−8.67 (m, 1H), 8.57 (d, J = 2.5 Hz, 1H), 8.43 (s, 1H), 7.72 (t, J = 8.7 Hz, 3H), 7.49 (t, J = 7.9 Hz, 1H), 6.02 (d, J = 6.3 Hz, 1H), 3.91 (s, 1H), 1.99−2.03 (m, 2H), 1.70−1.72 (m, 2H), 1.60 (s, 1H), 1.37−1.13 (m, 5H). 13C NMR (101 MHz, MeOD) δ 163.62, 158.67, 154.55, 145.64, 144.08, 143.40, 141.62, 138.07, 130.47, 123.02, 122.50, 120.22, 101.40, 51.02, 33.61, 26.67, 26.06. N4-Cyclohexyl-N2-(3-morpholinophenyl)pyrimidine-2,4-diamine (4o). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-morpholin-4-ylaniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4o as a white oil (0.018 g, 51%). TLC Rf 0.4 (5% MeOH/DCM). LC−MS (ESI) m/z: 354 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 7.62 (s, 1H), 7.21 (d, J = 6.6 Hz, 3H), 7.11−7.02 (m, 1H), 6.64 (dd, J = 5.7, 3.4 Hz, 1H), 5.98 (d, J = 6.7 Hz, 1H), 3.91−3.70 (m, 5H), 3.22−3.10 (m, 4H), 2.10−1.93 (m, 2H), 1.76−1.82 (m, 2H), 1.64−1.69 (m, 1H), 1.46−1.12 (m, 5H). 13C NMR (101 MHz, CDCl3) δ 161.86, 151.96, 138.95, 129.33, 112.24, 111.16, 107.93, 66.89, 50.64, 49.30, 32.63, 25.36, 24.77. N4-Cyclohexyl-N2-(1-phenylpiperidin-3-yl)pyrimidine-2,4diamine (4p). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 1-phenylpiperidin-3-amine (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 22 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ EtOAc) was followed by evaporation, giving 4p as a colorless oil (0.002 g, 6%). TLC Rf 0.3 (10% MeOH/EtOAc). LC−MS (ESI) m/z: 352 [M + H]+. 1H NMR (500 MHz, MeOD) δ 7.58 (s, 1H), 7.23 (t, J = 10.0 Hz, 2H), 7.00 (d, J = 8.1 Hz, 2H), 6.83 (t, J = 7.3 Hz, 1H), 5.84 (d, J = 6.5 Hz, 1H), 4.17−4.03 (m, 1H), 3.87 (s, 1H), 3.70 (d, J = 11.6 Hz, 1H), 3.44−3.36 (m, 1H), 2.93 (t, J = 15.0 Hz, 1H), 2.82−2.73 (m, 1H), 1.98 (d, J = 8.1 Hz, 3H), 1.96− 1.86 (m, 1H), 1.79−1.71 (m, 2H), 1.58−1.65 (m, 2H), 1.31− 1.40 (m, 2H), 1.20−1.29 (m, 3H). 13C NMR (126 MHz, MeOD) δ 162.32, 151.98, 128.59, 119.61, 116.99, 55.38, 50.15, 49.16, 32.45, 32.40, 29.61, 25.36, 24.67, 23.24. N4-Cyclohexyl-N2-(3-(pyridin-3-yl)cyclohexyl)pyrimidine2,4-diamine (4q). To a mixture of 3a (0.080 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.16M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)cyclohexan-1-amine (0.080 mmol, 1.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 6 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4q as a yellow oil (0.002 g, 7%). TLC Rf 0.2 (10% MeOH/DCM). LC− MS (ESI) m/z: 353 [M + H]+. 1H NMR (500 MHz, MeOD) δ 9.91 (d, J = 7.0 Hz, 2H), 8.79 (d, J = 8.0 Hz, 1H), 8.22 (q, J = 5.0 Hz, 2H), 6.70 (d, J = 6.0 Hz, 1H), 4.18−4.04 (m, 1H), 3.78 (td, J = 10.8, 5.4 Hz, 1H), 3.11 (t, J = 12.3 Hz, 1H), 2.28 (d, J = 11.3 Hz, 1H), 2.13−2.05 (m, 3H), 2.05−1.96 (m, 2H), 1.84−1.89 (m, 2H), 1.74 (dt, J = 12.8, 4.1 Hz, 1H), 1.48−1.63 (m, 4H), 1.44− 1.28 (m, 4H). 13C NMR (126 MHz, MeOD) δ 162.95, 155.05, 154.22, 147.78, 146.83, 138.49, 138.24, 127.22, 107.83, 69.34, 49.71, 41.40, 39.97, 34.25, 32.11, 31.96, 25.32, 24.56, 23.72. N4-Cyclohexyl-N2-(4-fluorophenyl)pyrimidine-2,4-diamine (4r). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 4fluoroaniline (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The

128.42, 128.31, 120.85, 118.56, 117.98, 77.27, 52.19, 49.89, 33.08, 25.56, 24.75. N4-Cyclohexyl-N2-(3-(oxazol-2-yl)phenyl)pyrimidine-2,4diamine (4k). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1,3-oxaxol-2-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 4k as a white solid (0.022 g, 66%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 336 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.40 (s, 1H), 7.97−7.83 (m, 1H), 7.76−7.65 (m, 3H), 7.41 (s, 1H), 7.28 (s, 1H), 7.25 (s, 1H), 5.89 (d, J = 6.0 Hz, 1H), 5.04 (br s, 1H), 3.74 (br s, 1H), 2.13−2.01 (m, 2H), 1.76−1.80 (m, 2H), 1.65−1.69 (m, 1H), 1.47−1.34 (m, 2H), 1.21−1.29 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 162.08, 162.02, 158.70, 140.30, 138.48, 129.23, 128.37, 127.92, 121.20, 120.13, 117.01, 50.03, 33.08, 25.57, 24.81. N2-(3-(1H-Pyrazol-3-yl)phenyl)-N4-cyclohexylpyrimidine2,4-diamine (4l). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1H-pyrazol-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 4l as a colorless oil (0.020 g, 60%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 335 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.08 (s, 1H), 7.69 (d, J = 16.6 Hz, 2H), 7.56 (d, J = 8.0 Hz, 1H), 7.43 (d, J = 8.0 Hz, 1H), 7.36 (td, J = 7.8, 1.8 Hz, 1H), 6.67 (d, J = 2.5 Hz, 1H), 5.99 (dd, J = 6.4, 1.8 Hz, 1H), 3.92 (s, 1H), 2.00−2.02 (m, 2H), 1.72−1.75 (m, 2H), 1.61−1.63 (m, 1H), 1.19−1.31 (m, 5H). 13C NMR (126 MHz, MeOD) δ 162.23, 158.06, 150.32, 140.11, 128.66, 119.78, 119.48, 117.56, 102.17, 97.88, 49.48, 32.36, 25.35, 24.70. N2-(3-(1H-Imidazol-1-yl)phenyl)-N4-cyclohexylpyrimidine2,4-diamine (4m). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1H-imidazol-1-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 20 h; it was then cooled to rt. Purification using automated reversed-phase flash chromatography (water/MeOH) was followed by evaporation, giving 4m as a colorless oil (0.010 g, 30%). LC−MS (ESI) m/z: 335 [M + H]+. 1 H NMR (400 MHz, MeOD) δ 8.50 (br s, 1H), 8.46 (d, J = 2.2 Hz, 1H), 8.16−8.01 (m, 2H), 7.35 (t, J = 8.0 Hz, 1H), 7.06−6.95 (m, 2H), 6.91 (ddd, J = 8.2, 2.1, 0.9 Hz, 1H), 6.56 (d, J = 6.1 Hz, 1H), 4.13−4.14 (m, 1H), 2.11−1.97 (m, 2H), 1.81−1.86 (m, 2H), 1.70−1.74 (m, 1H), 1.57−1.44 (m, 2H), 1.36−1.39 (m, 3H). 13C NMR (101 MHz, MeOD) δ 164.23, 155.53, 153.70, 151.78, 137.14, 131.98, 123.60, 120.79, 117.54, 111.20, 108.63, 107.95, 50.50, 33.57, 26.75, 25.94. N4-Cyclohexyl-N2-(3-(pyrazin-2-yl)phenyl)pyrimidine-2,4diamine (4n). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyrazin-2-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/EtOAc) was followed by evaporation, giving 4n as a colorless oil (0.007 g, 20%). TLC Rf 0.7 (10% MeOH/EtOAc). LC−MS (ESI) m/z: 347 [M + H]+. 1H NMR (400 MHz, MeOD) δ 9.13 (d, J = 1.6 1998


ACS Omega

Article

2-Chloro-N-methylpyrimidin-4-amine (3b). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) and methylamine (2.0 M in MeOH) (20 mmol, 2.0 equiv) was stirred at rt in DCM (20 mL, 0.50 M) in a nitrogen atmosphere. After stirring for 16 h, the reaction mixture was concentrated to remove volatiles. Purification using automated flash chromatography (EtOAc/ hexanes + 2% MeOH additive) was followed by evaporation, giving 3b as a white solid (0.54 g, 38%). TLC Rf 0.4 (70% EtOAc/hexanes). LC−MS (ESI) m/z: 144 [M + H]+. 1H NMR (500 MHz, MeOD) δ 7.81 (d, J = 6.0 Hz, 1H), 6.40 (d, J = 6.4 Hz, 1H), 2.92 (s, 3H). 13C NMR (126 MHz, MeOD) δ 164.37, 160.27, 153.78, 104.47, 26.17. N4-Methyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (5a). To a mixture of 3b (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5a as a colorless oil (0.006 g, 22%). TLC Rf 0.4 (10% MeOH/DCM). LC−MS (ESI) m/z: 278 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.89−8.77 (m, 1H), 8.52 (d, J = 5.0 Hz, 1H), 8.24−8.05 (m, 2H), 7.87−7.71 (m, 1H), 7.67 (ddd, J = 8.1, 1.8, 0.9 Hz, 1H), 7.52 (dd, J = 8.0, 4.9 Hz, 1H), 7.41 (t, J = 7.9 Hz, 1H), 7.25 (dt, J = 7.6, 1.2 Hz, 1H), 5.98 (d, J = 6.0 Hz, 1H), 2.95 (s, 3H). 13C NMR (126 MHz, MeOD) δ 163.84, 159.69, 153.38, 147.22, 146.94, 141.50, 137.51, 135.13, 129.06, 124.02, 119.79, 118.90, 117.48, 97.46, 26.56. 2-Chloro-N-ethylpyrimidin-4-amine (3c). A mixture of 2,4dichloropyrimidine 2 (10 mmol, 1.0 equiv) and ethylamine (2.0 M in THF) (20 mmol, 2.0 equiv) was stirred at rt in MeOH (10 mL, 1.0 M) in a nitrogen atmosphere. After 16 h, the reaction mixture was concentrated to remove volatiles. Purification using automated flash chromatography (EtOAc/hexanes + 2% MeOH additive) was followed by evaporation, giving 3c as a white solid (0.43 g, 27%). TLC Rf 0.5 (70% EtOAc/hexanes). LC−MS (ESI) m/z: 160 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.04 (br s, 1H), 6.26 (d, J = 5.9 Hz, 1H), 5.41 (br s, 1H), 3.38 (br s, 2H), 1.28 (t, J = 7.3 Hz, 3H). 13C NMR (126 MHz, CDCl3) δ 163.55, 160.58, 157.26, 99.99, 36.48, 14.36. N4-Ethyl-N 2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (5b). To a mixture of 3c (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5b as a colorless oil (0.003 g, 10%). TLC Rf 0.1 (5% MeOH/DCM). LC−MS (ESI) m/z: 292 [M + H]+. 1 H NMR (500 MHz, MeOD) δ 8.84 (s, 1H), 8.55 (s, 1H), 8.18 (s, 1H), 8.13 (dt, J = 8.1, 1.8 Hz, 1H), 7.78 (s, 1H), 7.68−7.59 (m, 1H), 7.55 (dd, J = 8.0, 4.8 Hz, 1H), 7.42 (t, J = 7.9 Hz, 1H), 7.26 (dt, J = 7.7, 1.2 Hz, 1H), 5.97 (d, J = 5.4 Hz, 1H), 3.56−3.38 (m, 2H), 1.23 (t, J = 7.2 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 163.10, 147.24, 146.98, 141.55, 137.81, 137.57, 135.18, 129.04, 124.04, 119.79, 118.83, 117.43, 35.14, 13.49. 2-Chloro-N-propylpyrimidin-4-amine (3d). A mixture of 2,4dichloropyrimidine 2 (10 mmol, 1.0 equiv) and cyclopentylamine (20 mmol, 2.0 equiv) was stirred at rt in DCM (20 mL, 0.50 M) in a nitrogen atmosphere. After stirring for 16 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3d as a colorless oil (0.84 g, 49%). TLC Rf

reaction mixture was heated to reflux and stirred at that temperature for 1.5 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4r as a white solid (0.024 g, 84%). TLC Rf 0.7 (10% MeOH/DCM). LC−MS (ESI) m/z: 287 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 7.77 (s, 1H), 7.65−7.46 (m, 2H), 7.09−6.89 (m, 2H), 5.95 (d, J = 6.2 Hz, 1H), 5.50 (br s, 2H), 3.71 (br s, 1H), 2.05 (dd, J = 12.9, 4.3 Hz, 2H), 1.78−1.83 (m, 2H), 1.67−1.71 (m, 1H), 1.47−1.33 (m, 2H), 1.22−1.30 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 161.93, 159.61, 157.69, 135.07, 121.63, 115.39, 50.47, 32.81, 25.49, 24.88. 4-((4-(Cyclohexylamino)pyrimidin-2-yl)amino)benzamide (4s). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 4aminobenzamide (0.20 mmol, 2.0 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4s as a white solid (0.011 g, 35%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 312 [M + H]+. 1H NMR (400 MHz, MeOD) δ 7.87−7.79 (m, 4H), 7.75 (d, J = 6.2 Hz, 1H), 6.00 (d, J = 6.1 Hz, 1H), 3.93 (s, 1H), 2.15−2.00 (m, 2H), 1.83−1.88 (m, 2H), 1.71−1.76 (m, 1H), 1.57−1.41 (m, 2H), 1.27−1.34 (m, 3H). 13C NMR (101 MHz, MeOD) δ 172.05, 163.65, 153.57, 145.07, 130.50, 129.60, 119.66, 114.60, 51.24, 33.74, 26.83, 26.36. N4-Cyclohexyl-N2-(4-(pyridin-2-yl)phenyl)pyrimidine-2,4diamine (4t). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 4-(2-pyridyl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (EtOAc/hexanes + 2% MeOH additive) was followed by evaporation, giving 4t as a colorless oil (0.002 g, 6%). TLC Rf 0.2 (50% EtOAc/hexanes + 1% MeOH). LC−MS (ESI) m/z: 346 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.59 (d, J = 4.8 Hz, 1H), 7.89 (d, J = 8.5 Hz, 2H), 7.82 (d, J = 6.2 Hz, 1H), 7.71−7.60 (m, 3H), 7.42−7.25 (m, 1H), 7.16−7.19 (m, 1H), 5.79 (d, J = 5.9 Hz, 1H), 4.76 (s, 1H), 3.84− 3.45 (m, 1H), 2.07−2.10 (m, 2H), 1.67−1.79 (m, 2H), 1.66− 1.56 (m, 1H), 1.45−1.30 (m, 2H), 1.21−1.29 (m, 3H). 13C NMR (126 MHz, CDCl3) δ 162.02, 158.96, 157.19, 149.55, 140.80, 136.63, 132.88, 127.36, 121.42, 119.86, 118.96, 118.84, 50.15, 33.06, 33.03, 25.60, 24.93. N4-Cyclohexyl-N2-(4-(pyridin-3-yl)phenyl)pyrimidine-2,4diamine (4u). To a mixture of 3a (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 4-pyridin-3-ylaniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 4 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 4u as a colorless oil (0.001 g, 3%). TLC Rf 0.2 (10% MeOH/DCM). LC−MS (ESI) m/z: 346 [M + H]+. 1H NMR (500 MHz, MeOD) δ 10.18−10.05 (m, 1H), 9.83 (d, J = 6.2 Hz, 1H), 8.96 (dd, J = 8.5, 2.1 Hz, 1H), 8.28−8.17 (m, 2H), 7.65 (d, J = 8.2 Hz, 2H), 6.88 (d, J = 8.2 Hz, 2H), 6.72 (d, J = 6.0 Hz, 1H), 4.0−4.11 (m, 1H), 2.10−2.14 (m, 2H), 1.85−1.90 (m, 2H), 1.79−1.67 (m, 1H), 1.48−1.54 (m, 2H), 1.47−1.30 (m, 3H). 13C NMR (126 MHz, MeOD) δ 162.93, 155.06, 154.25, 151.12, 144.26, 141.28, 136.28, 136.14, 127.94, 127.20, 120.72, 114.97, 107.81, 49.92, 31.93, 25.34, 24.63. 1999


ACS Omega

Article

N4-Isopropyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (5e). To a mixture of 3f (0.105 mmol, 1.00 equiv) in EtOH (0.500 mL, 0.210 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.115 mmol, 1.10 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 5e as a colorless oil (0.005 g, 16%). TLC Rf 0.5 (10% MeOH/DCM). HRMS (ESI) m/z: calcd for [M + H]+ 306.1718, found 306.1720. 1H NMR (500 MHz, CDCl3) δ 8.87 (s, 1H), 8.59 (s, 1H), 8.05−7.82 (m, 3H), 7.55 (d, J = 5.0 Hz, 1H), 7.35−7.41 (m, 3H), 7.20 (d, J = 10.0 Hz, 1H), 5.85 (d, J = 5.7 Hz, 1H), 4.72 (s, 1H), 4.06 (s, 1H), 1.25 (d, J = 6.4 Hz, 6H). 13C NMR (126 MHz, CDCl3) δ 162.16, 159.77, 155.62, 148.38, 148.36, 141.01, 138.40, 136.95, 134.44, 129.41, 123.46, 120.54, 118.80, 117.78, 96.46, 42.81, 22.80. N-(tert-Butyl)-2-chloropyrimidin-4-amine (3g). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) and tertbutylamine (20 mmol, 2.0 equiv) was stirred at rt in DCM (20 mL, 0.50 M) under a nitrogen atmosphere for 16 h. The reaction mixture was then concentrated to remove volatiles. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3g as a white oil (0.017 g, 1%). TLC Rf 0.3 (40% EtOAc/hexanes). LC−MS (ESI) m/z: 186 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 7.97 (d, J = 6.0 Hz, 1H), 6.25 (br s, 1H), 5.07 (br s, 1H), 1.44 (s, 9H). 13C NMR (126 MHz, CDCl3) δ 162.88, 160.49, 156.53, 103.33, 51.87, 28.90. N4-(tert-Butyl)-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4diamine (5f). To a mixture of 3g (0.081 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.16M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.089 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 5f as an orange oil (0.004 g, 16%). TLC Rf 0.3 (5% MeOH/DCM). LC−MS (ESI) m/z: 319 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.91 (br s, 1H), 8.63 (br s, 1H), 8.08−7.73 (m, 3H), 7.58 (d, J = 8.2 Hz, 1H), 7.40−7.44 (m, 3H), 7.24 (d, J = 5.0 Hz, 1H), 5.89 (d, J = 5.4 Hz, 1H), 4.85 (s, 1H), 1.46 (s, 9H). 13C NMR (126 MHz, CDCl3) δ 162.37, 158.85, 153.78, 148.44, 140.43, 138.58, 134.51, 129.44, 123.54, 121.10, 119.34, 118.31, 98.58, 51.59, 29.14. 2-Chloro-N-(1-methoxypropan-2-yl)pyrimidin-4-amine (3h). A mixture of 2,4-dichloropyrimidine 2 (5.0 mmol, 1.0 equiv), 1-methoxypropan-2-amine HCl (7.5 mmol, 1.5 equiv), and triethylamine (10.5 mmol, 2.1 equiv) was stirred at rt in DCM (10 mL, 0.50 M) in a nitrogen atmosphere. After 16 h, the reaction mixture was concentrated to remove volatiles. To the crude residue was added water (10 mL), and the aqueous portion was extracted into EtOAc (3 × 10 mL). The combined organics were dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 3h as a colorless oil (0.29 g, 29%). TLC Rf 0.3 (60% EtOAc/hexanes). LC−MS (ESI) m/z: 204 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.00 (d, J = 6.2 Hz, 1H), 6.26 (d, J = 6.0 Hz, 1H), 5.44 (br s, 1H), 4.21 (br s, 1H), 3.56−3.31 (m, 5H), 1.28 (d, J = 6.7 Hz, 3H). 13C NMR (126 MHz, CDCl3) δ 162.99, 160.71, 156.53, 104.44, 75.32, 59.18, 46.45, 17.43. N4-(1-Methoxypropan-2-yl)-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (5g). To a mixture of 3h (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol,

0.3 (40% EtOAc/hexanes). LC−MS (ESI) m/z: 174 [M + H]+. 1 H NMR (500 MHz, CDCl3) δ 8.04 (br s, 1H), 6.27 (d, J = 6.0 Hz, 1H), 5.54 (br s, 1H), 3.28 (br s, 2H), 1.66 (q, J = 7.3 Hz, 2H), 1.00 (t, J = 7.4 Hz, 3H). 13C NMR (126 MHz, CDCl3) δ 163.74, 160.55, 157.72, 99.81, 43.44, 22.35, 11.32. N4-Propyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (5c). To a mixture of 3d (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5c as a colorless oil (0.005 g, 16%). TLC Rf 0.4 (10% MeOH/DCM). LC−MS (ESI) m/z: 306 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.82 (s, 1H), 8.58−8.47 (m, 1H), 8.21−8.07 (m, 2H), 7.76 (s, 1H), 7.69−7.61 (m, 1H), 7.53 (dd, J = 7.9, 4.8 Hz, 1H), 7.41 (t, J = 7.9 Hz, 1H), 7.25 (dt, J = 7.7, 1.2 Hz, 1H), 5.97 (d, J = 5.8 Hz, 1H), 3.37 (s, 2H), 1.62 (q, J = 7.3 Hz, 2H), 0.92 (t, J = 7.3 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 163.26, 159.66, 153.40, 147.22, 147.00, 141.51, 137.76, 137.56, 135.19, 129.02, 124.02, 119.84, 118.89, 117.53, 97.60, 42.24, 22.19, 10.38. N-Butyl-2-chloropyrimidin-4-amine (3e). To a suspension of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) in DCM (20 mL, 0.50 M) was added butylamine (20 mmol, 2.0 equiv) under a nitrogen atmosphere at rt. After stirring for 16 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3e as a white solid (0.96 g, 52%). TLC Rf 0.25 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 188 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.04 (br s, 1H), 6.25 (d, J = 5.9 Hz, 1H), 5.46 (br s, 1H), 3.31 (br s, 2H), 1.71−1.51 (m, 2H), 1.51−1.33 (m, 2H), 0.97 (t, J = 7.3 Hz, 3H). 13C NMR (101 MHz, CDCl3) δ 163.70, 160.62, 156.38, 41.42, 31.11, 19.97, 13.71. N4-Butyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4-diamine (5d). To a mixture of 3e (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5d as a colorless oil (0.006 g, 19%). TLC Rf 0.4 (10% MeOH/DCM). LC−MS (ESI) m/z: 320 [M + H]+. 1 H NMR (400 MHz, MeOD) δ 8.70 (s, 1H), 8.48−8.33 (m, 1H), 8.07−7.95 (m, 2H), 7.63 (s, 1H), 7.53 (dd, J = 8.2, 2.1 Hz, 1H), 7.39−7.43 (m, 1H), 7.29 (t, J = 7.9 Hz, 1H), 7.13 (d, J = 7.7 Hz, 1H), 5.85 (d, J = 6.0 Hz, 1H), 3.28 (s, 2H), 1.43−1.50 (m, 2H), 1.21−1.26 (m, 2H), 0.79 (t, J = 7.4 Hz, 3H). 13C NMR (101 MHz, MeOD) δ 164.65, 161.00, 148.65, 148.45, 142.88, 139.17, 136.60, 130.43, 125.42, 121.32, 120.36, 119.03, 117.61, 41.58, 32.56, 21.21, 14.19. 2-Chloro-N-isopropylpyrimidin-4-amine (3f). To a suspension of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) in DCM (20 mL, 0.50 M) under a nitrogen atmosphere was added isopropylamine (20 mmol, 2.0 equiv) at rt. After stirring for 16 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3f as a colorless oil (1.0 g, 60%). TLC Rf 0.10 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 174 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.02 (s, 1H), 6.23 (d, J = 5.9 Hz, 1H), 5.10 (br s, 1H), 3.94 (br s, 1H), 1.27 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, CDCl3) δ 162.81, 160.84, 157.19, 100.94, 43.25, 22.52. 2000


ACS Omega

Article

1H), 6.18 (d, J = 6.7 Hz, 1H), 4.51 (s, 1H), 1.49 (d, J = 7.2 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 176.99, 162.40, 155.33, 147.46, 146.98, 139.06, 137.96, 136.98, 135.26, 129.59, 124.10, 122.01, 120.78, 119.07, 98.50, 51.06, 16.82. (S)-N-(sec-Butyl)-2-chloropyrimidin-4-amine (3j). To a suspension of 2,4-dichloropyrimidine 2 (2.0 mmol, 1.0 equiv) in DCM (5.0 mL, 0.40 M) under a nitrogen atmosphere was added (S)-(+)-2-aminobutane (4.0 mmol, 2.0 equiv) at rt. After stirring for 6 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 3j as a colorless oil (0.14 g, 37%). TLC Rf 0.25 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 188 [M + H]+. [α]D20 = 29 (c 0.0011, CHCl3). 1H NMR (500 MHz, MeOD) δ 7.79 (d, J = 5.0 Hz, 1H), 6.36 (d, J = 5.0 Hz, 1H), 4.04−4.09 (m,1H), 1.64−1.49 (m, 2H), 1.19 (d, J = 6.6 Hz, 3H), 0.95 (t, J = 7.4 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 163.46, 160.18, 153.91, 104.38, 28.82, 18.75, 9.38. (S)-N4-(sec-Butyl)-N2-(3-(pyridin-3-yl)phenyl)pyrimidine2,4-diamine (5j). To a mixture of 3j (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 4 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5j as a yellow oil (0.007 g, 22%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 320 [M + H]+. [α]D20 = 11 (c 0.000073, CHCl3). 1H NMR (500 MHz, CDCl3) δ 8.86 (s, 1H), 8.58 (d, J = 4.5 Hz, 1H), 8.01−7.80 (m, 3H), 7.57 (d, J = 5.0 Hz, 1H), 7.49−7.29 (m, 3H), 7.19 (d, J = 5.8 Hz, 1H), 5.85 (d, J = 5.8 Hz, 1H), 4.77 (br s, 1H), 3.85 (br s, 1H), 1.53−1.59 (m, 2H), 1.20 (d, J = 6.4 Hz, 3H), 0.92 (t, J = 7.4 Hz, 3H). 13C NMR (126 MHz, CDCl3) δ 162.43, 159.48, 155.08, 148.41, 140.82, 138.47, 136.91, 134.45, 129.43, 123.46, 120.68, 118.81, 117.79, 96.43, 48.24, 29.66, 20.27, 10.36. (R)-N-(sec-Butyl)-2-chloropyrimidin-4-amine (3k). To a suspension of 2,4-dichloropyrimidine 2 (1.0 mmol, 1.0 equiv) in DCM (3.0 mL, 0.33M) under a nitrogen atmosphere was added (R)-(−)-2-aminobutane (2.0 mmol, 2.0 equiv) at rt. After stirring for 6 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 3k as a colorless oil (0.071 g, 38%). TLC Rf 0.25 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 188 [M + H]+. [α]D20 = −45 (c 0.00048, CHCl3). 1H NMR (500 MHz, MeOD) δ 7.79 (d, J = 6.1 Hz, 1H), 6.37 (d, J = 6.7 Hz, 1H), 4.17−3.96 (m, 1H), 1.65−1.48 (m, 2H), 1.19 (d, J = 6.6 Hz, 3H), 0.96 (t, J = 7.4 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 163.47, 160.19, 153.91, 104.38, 48.21, 28.81, 18.74, 9.37. (R)-N4-(sec-Butyl)-N2-(3-(pyridin-3-yl)phenyl)pyrimidine2,4-diamine (5k). To a mixture of 3k (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5k as a colorless oil (0.003 g, 9%). TLC Rf 0.3 (80% EtOAc/hexanes). LC−MS (ESI) m/z: 320 [M + H]+. [α]D20 = −10 (c 0.000033, CHCl3). 1H NMR (500 MHz, CDCl3) δ 8.87 (s, 1H), 8.59 (s, 1H), 7.96 (s, 2H), 7.89 (dt, J = 7.8, 1.8 Hz, 1H), 7.57 (ddd, J = 8.1, 2.0, 1.0 Hz, 1H), 7.42−7.32 (m, 2H), 7.22−7.15 (m, 2H), 5.85 (d, J = 5.6 Hz, 1H), 4.64 (br s, 1H), 3.86 (br s, 1H), 1.66−1.47 (m, 2H), 1.21 (d, J = 6.5 Hz, 3H), 0.93 (t, J = 7.4 Hz, 3H). 13C NMR (126 MHz,

1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5g as a colorless oil (0.010 g, 30%). TLC Rf 0.2 (5% MeOH/DCM). LC−MS (ESI) m/z: 336 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.83 (s, 1H), 8.54 (d, J = 4.9 Hz, 1H), 8.11−8.14 (m, 2H), 7.76 (d, J = 5.7 Hz, 1H), 7.63 (d, J = 5.0 Hz, 1H), 7.54 (ddd, J = 7.9, 4.9, 0.9 Hz, 1H), 7.41 (t, J = 7.9 Hz, 1H), 7.26 (d, J = 5.0 Hz, 1H), 5.99 (d, J = 6.0 Hz, 1H), 4.38 (s, 1H), 3.42 (ddd, J = 49.5, 9.4, 5.6 Hz, 2H), 3.33 (s, 3H), 1.23 (d, J = 6.7 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 162.75, 159.70, 153.82, 147.24, 147.00, 141.52, 137.59, 135.24, 129.04, 124.01, 119.84, 118.89, 117.51, 97.54, 75.41, 57.78, 45.46, 16.36. Methyl (2-chloropyrimidin-4-yl)-L-alaninate (3i). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv), H-Ala-OMeHCl (10 mmol, 1.0 equiv), and triethylamine (12 mmol, 1.2 equiv) was stirred at rt in DCM (20 mL, 0.50 M) in a nitrogen atmosphere. After stirring for 16 h, the reaction mixture was concentrated to remove volatiles. To the crude residue was added water (10 mL), and the crude was extracted into EtOAc (3 × 10 mL). The combined organic phases were dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3i as a colorless oil (0.13 g, 6%). TLC Rf 0.2 (40% EtOAc/hexanes). LC−MS (ESI) m/z: 218 [M + H]+. [α]D20 = −20 (c 0.00066, CHCl3). 1H NMR (500 MHz, CDCl3) δ 8.15−7.97 (m, 1H), 6.33 (d, J = 5.4 Hz, 1H), 5.69 (br s, 1H), 4.73 (br s, 1H), 3.82 (s, 3H), 1.54 (d, J = 5.0 Hz, 3H). 13C NMR (126 MHz, CDCl3) δ 173.35, 162.39, 160.59, 160.54, 156.33, 104.28, 52.74, 49.33, 18.31. Methyl (2-((3-(pyridin-3-yl)phenyl)amino)pyrimidin-4-yl)-Lalaninate (5h). To a mixture of 3i (0.30 mmol, 1.0 equiv) in EtOH (1.5 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.33 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5h as an orange foam (0.024 g, 23%). TLC Rf 0.1 (5% MeOH/DCM). LC−MS (ESI) m/z: 350 [M + H]+. [α]D20 = −36 (c 0.000044, CHCl3). 1H NMR (500 MHz, MeOD) δ 8.85 (s, 1H), 8.54 (d, J = 4.9 Hz, 1H), 8.14 (dt, J = 8.0, 1.9 Hz, 1H), 7.97 (t, J = 2.0 Hz, 1H), 7.82 (d, J = 5.9 Hz, 1H), 7.66 (ddd, J = 8.4, 2.2, 1.0 Hz, 1H), 7.55 (dd, J = 7.9, 4.9 Hz, 1H), 7.42 (t, J = 7.9 Hz, 1H), 7.28 (ddd, J = 7.7, 1.8, 1.0 Hz, 1H), 6.09 (d, J = 5.9 Hz, 1H), 4.68 (d, J = 7.3 Hz, 1H), 3.57 (s, 3H), 1.48 (d, J = 7.3 Hz, 3H). 13C NMR (126 MHz, MeOD) δ 174.42, 162.57, 159.21, 153.59, 147.25, 147.05, 141.08, 137.64, 135.25, 129.08, 124.01, 120.21, 119.23, 117.75, 97.64, 51.11, 49.18, 48.10, 16.28. (2-((3-(Pyridin-3-yl)phenyl)amino)pyrimidin-4-yl)-L-alanine (5i). To 5h (0.043 mmol, 1.0 equiv) in 0.72 mL (0.060 M) of THF/water (5:1) at rt under a nitrogen atmosphere was added a 1 N NaOH solution (0.13 mmol, 3.0 equiv). The reaction mixture was stirred at 80 °C for 3 h; it was then cooled to rt and concentrated to remove volatiles. The residue was diluted with water (1 mL) and then adjusted to pH 4 with 1 N HCl. The precipitated solid was filtered and washed with water, providing 5i as a white solid (0.007 g, 49%). LC−MS (ESI) m/z: 336 [M + H]+. [α]D20 = −55 (c 0.000024, CHCl3). 1H NMR (500 MHz, MeOD) δ 8.81 (s, 1H), 8.54 (s, 1H), 8.16−8.06 (m, 1H), 7.72 (dd, J = 5.6, 2.8 Hz, 2H), 7.64 (d, J = 6.8 Hz, 1H), 7.54 (dd, J = 8.0, 4.9 Hz, 1H), 7.47 (t, J = 8.1 Hz, 1H), 7.37 (dt, J = 7.8, 1.4 Hz, 2001


ACS Omega

Article

CDCl3) δ 162.43, 159.67, 155.70, 148.44, 148.42, 140.87, 138.49, 136.94, 134.44, 129.44, 123.46, 120.63, 118.72, 117.72, 96.94, 48.20, 29.69, 20.30, 10.36. 2-Chloro-N-cyclopropylpyrimidin-4-amine (3l). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) and cyclopropylamine (10 mmol, 1.0 equiv) was stirred at rt in DCM (20 mL, 0.50 M) in a nitrogen atmosphere. After stirring for 16 h, the reaction mixture was concentrated to remove volatiles. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 3l as a white solid (0.39 g, 23%). TLC Rf 0.3 (40% EtOAc/hexanes). LC−MS (ESI) m/z: 172 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.15 (d, J = 5.9 Hz, 1H), 6.77−6.48 (m, 1H), 5.74 (br s, 1H), 2.59 (br s, 1H), 1.00−0.83 (m, 2H), 0.72−0.54 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 165.25, 160.30, 157.64, 101.64, 23.46, 7.71. N4-Cyclopropyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4diamine (5l). To a mixture of 3l (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5l as a colorless oil (0.004 g, 13%). TLC Rf 0.2 (5% MeOH/DCM). LC−MS (ESI) m/z: 304 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.87 (d, J = 2.6 Hz, 1H), 8.58 (d, J = 5.0 Hz, 1H), 8.05 (d, J = 5.0 Hz, 1H), 7.93 (s, 1H), 7.86−7.88 (m 1H), 7.56 (d, J = 8.3 Hz, 1H), 7.41−7.31 (m, 2H), 7.19 (d, J = 7.6 Hz, 1H), 7.13 (s, 1H), 6.32−6.08 (m, 1H), 5.22 (s, 1H), 2.57 (br s, 1H), 0.84−0.78 (m, 2H), 0.62−0.56 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 164.36, 159.65, 156.84, 148.46, 148.43, 140.76, 138.48, 136.86, 134.44, 129.45, 123.49, 120.73, 118.81, 117.77, 95.85, 23.46, 7.59. 2-Chloro-N-(1-(trifluoromethyl)cyclopropyl)pyrimidin-4amine (3m). A mixture of 2,4-dichloropyrimidine 2 (2.0 mmol, 1.0 equiv) and 1-(trifluoromethyl)cyclopropanamine (2.5 mmol, 1.25 equiv) was stirred in NMP (1.0 mL, 2.0 M) under microwave irradiation at 140 °C and 24 W for 1 h. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3m as a white solid (0.013 g, 3%). TLC Rf 0.4 (30% EtOAc/hexanes). LC−MS (ESI) m/z: 238 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.24 (d, J = 5.8 Hz, 1H), 6.68 (d, J = 5.8 Hz, 1H), 5.85 (br s, 1H), 1.56−1.45 (m, 2H), 1.17−1.19 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 164.16, 160.60, 158.41, 125.15 (q, J = 277 Hz, CF3), 119.37, 102.39, 34.46, 34.16, 33.86, 12.67, 12.66, 12.64. 19F NMR (471 MHz, CDCl3) δ −73.26. N 2 -(3-(Pyridin-3-yl)phenyl)-N 4 -(1-(trifluoromethyl)cyclopropyl)pyrimidine-2,4-diamine (5m). To a mixture of 3m (0.038 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.76M) under a nitrogen atmosphere at rt was added 3-(pyridin-3-yl)aniline (0.045 mmol, 1.2 equiv). The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 5m as a colorless oil (0.002 g, 14%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 372 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.88 (s, 1H), 8.61 (s, 1H), 8.10 (d, J = 5.8 Hz, 1H), 7.95−7.82 (m, 2H), 7.56− 7.58 (m, 1H), 7.41 (t, J = 7.9 Hz, 2H), 7.25−7.18 (m, 1H), 6.99 (s, 1H), 6.21 (d, J = 5.6 Hz, 1H), 5.35 (s, 1H), 1.45−1.36 (m, 2H), 1.22−1.12 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 163.00, 159.67, 157.42, 148.46, 140.39, 138.63, 134.45, 129.50, 125.46 (q, J = 275.94, CF3), 122.16, 121.12, 118.96, 117.91,

96.47, 34.56, 34.25, 33.95, 33.65, 12.74. 19F NMR (471 MHz, CDCl3) δ −73.18. 2-Chloro-N-cyclobutylpyrimidin-4-amine (3n). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) and cyclobutylamine (10 mmol, 1.0 equiv) was stirred at rt in DCM (20 mL, 0.50 M) in a nitrogen atmosphere. After stirring for 16 h, the reaction mixture was concentrated to remove volatiles. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 3n as a white solid (0.059 g, 3%). TLC Rf 0.3 (40% EtOAc/hexanes). LC−MS (ESI) m/z: 184 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.04 (d, J = 10.9 Hz, 1H), 6.21 (d, J = 10.0 Hz, 1H), 5.48 (br s, 1H), 4.01 (br s, 1H), 2.57−2.40 (m, 2H), 1.92−1.97 (m, 2H), 1.90− 1.74 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 162.57, 160.51, 157.78, 100.35, 46.73, 31.27, 30.75, 15.16. N4-Cyclobutyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4diamine (5n). To a mixture of 3n (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5n as a yellow oil (0.002 g, 6%). TLC Rf 0.1 (5% MeOH/DCM). LC−MS (ESI) m/z: 318 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.85 (s, 1H), 8.62−8.49 (m, 1H), 8.35−8.14 (m, 1H), 8.13 (dt, J = 8.0, 1.9 Hz, 1H), 7.77 (s, 1H), 7.54−7.60 (m, 2H), 7.42 (t, J = 7.9 Hz, 1H), 7.26 (d, J = 7.6, 1H), 5.94 (d, J = 5.9 Hz, 1H), 4.40−4.56 (m, 1H), 2.42−2.25 (m, 2H), 1.92−2.01 (m, 2H), 1.79−1.54 (m, 2H). 13C NMR (126 MHz, MeOD) δ 162.15, 159.43, 153.31, 147.28, 147.04, 141.37, 137.82, 137.63, 135.20, 129.03, 124.01, 120.00, 118.93, 117.64, 97.37, 45.88, 30.32, 14.57. 2-Chloro-N-cyclopentylpyrimidin-4-amine (3o). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv) and cyclopentylamine (20 mmol, 2.0 equiv) was stirred at rt in DCM (20 mL, 0.50 M) in a nitrogen atmosphere. After 16 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/hexanes) followed by evaporation gave 3o as a yellow oil (1.12 g, 57%). TLC Rf 0.25 (40% EtOAc/hexanes). LC−MS (ESI) m/z: 200 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.03 (d, J = 11.7 Hz, 1H), 6.32 (d, J = 6.3 Hz, 1H), 5.46 (br s, 1H), 3.93 (br s, 1H), 2.19−1.94 (m, 2H), 1.87−1.63 (m, 4H), 1.51−1.56 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 163.22, 160.56, 157.25, 100.46, 53.12, 33.08, 23.66. N4-Cyclopentyl-N2-(3-(pyridin-3-yl)phenyl)pyrimidine-2,4diamine (5o). To a mixture of 3o (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5o as a white oil (0.005 g, 15%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 332 [M + H]+. 1H NMR (400 MHz, MeOD) δ 8.81 (s, 1H), 8.53 (d, J = 5.1 Hz, 1H), 8.21 (br s, 1H), 8.09 (d, J = 7.5 Hz, 1H), 7.74 (s, 1H), 7.67−7.56 (m, 1H), 7.51−7.54 (m, 1H), 7.40 (t, J = 7.9 Hz, 1H), 7.23 (dd, J = 7.6, 1.9 Hz, 1H), 5.96 (d, J = 5.8 Hz, 1H), 4.30 (s, 1H), 1.96−2.01 (m, 2H), 1.68−1.75 (m, 2H), 1.45−1.53 (m, 4H). 13C NMR (101 MHz, MeOD) δ 164.22, 161.02, 148.64, 148.46, 142.94, 139.27, 139.02, 136.62, 130.40, 125.39, 121.27, 120.25, 118.99, 53.54, 33.77, 24.70. N-(2-Chloropyrimidin-4-yl)-O-methylhydroxylamine (3p). A mixture of 2,4-dichloropyrimidine 2 (10 mmol, 1.0 equiv), 2002


ACS Omega

Article

N4-(Piperidin-4-yl)-N2-(3-(pyridin-3-yl)phenyl)pyrimidine2,4-diamine (5q). To 3r (0.020 mmol, 1.0 equiv) in DCM (1.0 mL, 0.20 M) under a nitrogen atmosphere at rt was added trifluoroacetic acid (0.20 mmol, 10 equiv). The reaction mixture was stirred at rt for 3 h and then concentrated. Purification using automated reversed-phase flash chromatography (water/ MeOH) was followed by evaporation, giving 5q as a colorless oil (0.007 g, 100%). LC−MS (ESI) m/z: 347 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.91 (s, 1H), 8.63 (s, 1H), 8.16 (d, J = 7.9 Hz, 1H), 8.02 (s, 1H), 7.80 (s, 1H), 7.61 (d, J = 8.3 Hz, 2H), 7.52 (t, J = 7.8 Hz, 1H), 7.43 (d, J = 7.7 Hz, 1H), 6.15 (d, J = 6.2 Hz, 1H), 4.16−4.20 (m, 1H), 3.35−3.39 (m, 2H), 3.00−2.81 (m, 2H), 2.22−2.26 (m, 2H), 1.84−1.70 (m, 2H). 13C NMR (126 MHz, MeOD) δ 165.13, 162.56, 161.59, 156.29, 147.68, 147.00, 139.44, 137.92, 135.19, 129.43, 124.45, 122.05, 120.74, 119.38, 98.25, 45.38, 42.46, 27.85. 2-Chloro-N-(tetrahydro-2H-pyran-4-yl)pyrimidin-4-amine (3s). To a suspension of 2,4-dichloropyrimidine 2 (2.5 mmol, 1.0 equiv) in DCM (5.0 mL, 0.50 M) under a nitrogen atmosphere was added 4-aminotetrohydropyran (5.0 mmol, 2.0 equiv) at rt. After stirring for 16 h, the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/ hexanes) was followed by evaporation, giving 3s as a white solid (0.19 g, 35%). TLC Rf 0.30 (70% EtOAc/hexanes). LC−MS (ESI) m/z: 216 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.12− 7.94 (m, 1H), 6.25 (d, J = 5.9 Hz, 1H), 5.01 (br s, 1H), 4.00−4.04 (m, 2H), 3.53−3.59 (m, 2H), 2.11−1.96 (m, 2H), 1.63−1.49 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 162.63, 160.99, 157.11, 66.47, 47.24, 32.83. N2-(3-(Pyridin-3-yl)phenyl)-N4-(tetrahydro-2H-pyran-4-yl)pyrimidine-2,4-diamine (5r). To a mixture of 3s (0.094 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.19 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.103 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 4 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5r as a colorless oil (0.005 g, 15%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 348 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.80 (s, 1H), 8.53 (d, J = 5.1 Hz, 1H), 7.94−7.84 (m, 2H), 7.82 (d, J = 8.0 Hz, 1H), 7.53−7.43 (m, 1H), 7.35−7.27 (m, 2H), 7.23 (s, 1H), 7.13 (dd, J = 7.7, 1.6 Hz, 1H), 5.80 (d, J = 5.8 Hz, 1H), 4.66 (s, 1H), 3.91 (br s, 1H), 3.86 (d, J = 11.5 Hz, 2H), 3.28 (t, J = 11.7 Hz, 2H), 1.93 (d, J = 10.0 Hz, 2H), 1.54−1.35 (m, 2H). 13C NMR (126 MHz, CDCl3) δ 161.92, 159.68, 155.79, 148.51, 148.43, 140.74, 138.52, 136.95, 134.46, 129.43, 123.53, 120.84, 118.81, 117.87, 97.05, 66.64, 47.19, 33.17. N2-([1,1′-Biphenyl]-2-yl)-N4-isopropylpyrimidine-2,4-diamine (6a). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 2-aminobiphenyl (0.15 mmol, 1.5 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6a as a white solid (0.021 g, 69%). TLC Rf 0.7 (10% MeOH/DCM). LC−MS (ESI) m/z: 305 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.22 (d, J = 8.2 Hz, 1H), 7.71 (d, J = 5.9 Hz, 1H), 7.40−7.33 (m, 4H), 7.31−7.24 (m, 2H), 7.17 (d, J = 1.7 Hz, 1H), 7.03 (td, J = 7.4, 1.2 Hz, 1H), 5.73 (d, J = 6.0 Hz, 1H), 4.84 (br s, 1H), 3.86 (br s, 1H), 1.15 (d, J = 6.4 Hz, 6H). 13C NMR (101 MHz, CDCl3) δ 162.03, 158.76, 138.82, 136.31, 132.73, 130.26, 129.40, 128.90, 127.89, 127.58, 122.79, 121.39, 42.97, 22.72.

O-methylhydroxylamine HCl (15 mmol, 1.5 equiv), and triethylamine (20 mmol, 2.0 equiv) was stirred at rt in a 0.50 M mixture of DCM (10 mL) and MeOH (10 mL) under a nitrogen atmosphere for 16 h. The reaction mixture was then concentrated to remove volatiles. To the crude residue was added water (10 mL), and then, the crude was extracted into EtOAc (3 × 10 mL). The organic phase was dried over magnesium sulfate, filtered, and concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3p as a white solid (0.19 g, 12%). TLC Rf 0.5 (50% EtOAc/hexanes). LC−MS (ESI) m/z: 162 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.47 (br s, 1H), 8.31 (d, J = 5.7 Hz, 1H), 6.78 (d, J = 5.8 Hz, 1H), 3.84 (s, 3H). 13C NMR (126 MHz, CDCl3) δ 166.53, 159.99, 158.94, 101.72, 64.25. 4-(Methoxyamino)-N-(3-(pyridin-3-yl)phenyl)pyrimidin-2amine (5p). To a mixture of 3p (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 5p as a colorless oil (0.006 g, 20%). TLC Rf 0.4 (5% MeOH/DCM). LC−MS (ESI) m/z: 294 [M + H]+. 1 H NMR (500 MHz, CDCl3) δ 8.90 (s, 1H), 8.63 (d, J = 5.0 Hz, 1H), 8.24 (d, J = 5.6 Hz, 1H), 7.98−7.86 (m, 2H), 7.61 (s, 1H), 7.56 (d, J = 8.2 Hz, 1H), 7.46−7.34 (m, 2H), 7.27−7.21 (m, 1H), 7.18−7.09 (m, 1H), 6.40 (d, J = 5.6 Hz, 1H), 3.83 (s, 3H). 13C NMR (126 MHz, CDCl3) δ 166.38, 159.30, 158.40, 148.49, 148.41, 140.30, 138.54, 136.70, 134.44, 129.54, 123.53, 121.14, 118.95, 117.94, 95.89, 64.15. tert-Butyl 4-((2-chloropyrimidin-4-yl)amino)piperidine-1carboxylate (3q). To a suspension of 2,4-dichloropyrimidine 2 (5.0 mmol, 1.0 equiv) in DCM (10 mL, 0.50 M) under a nitrogen atmosphere was added 1-Boc-4-aminopiperidine (7.5 mmol, 1.5 equiv) at rt. After stirring for 5 h the reaction mixture was concentrated. Purification using automated flash chromatography (EtOAc/hexanes) was followed by evaporation, giving 3q as a white foam (0.41 g, 26%). TLC Rf 0.10 (30% EtOAc/ hexanes). LC−MS (ESI) m/z: 313 [M + H]+. 1H NMR (400 MHz, MeOD) δ 7.85 (br s, 1H), 6.40 (br s, 1H), 4.03−4.13 (m, 3H), 2.99 (s, 2H), 2.06−1.89 (m, 2H), 1.48 (s, 9H), 1.45−1.35 (m, 2H). 13C NMR (101 MHz, MeOD) δ 164.55, 161.59, 156.45, 155.77, 105.96, 101.41, 81.17, 43.88, 32.45, 28.68. tert-Butyl 4-((2-((3-(pyridin-3-yl)phenyl)amino)pyrimidin4-yl)amino)piperidine-1-carboxylate (3r). To a mixture of 3q (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyridin-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 3r as a colorless oil (0.007 g, 16%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 447 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.82 (s, 1H), 8.53 (d, J = 5.0 Hz, 1H), 8.19−8.05 (m, 2H), 7.77 (s, 1H), 7.59 (d, J = 7.4 Hz, 1H), 7.54 (dd, J = 7.9, 4.9 Hz, 1H), 7.42 (t, J = 7.9 Hz, 1H), 7.31−7.16 (m, 1H), 5.97 (d, J = 5.9 Hz, 1H), 4.02 (s, 1H), 3.98−3.84 (m, 2H), 2.60−2.69 (m, 2H), 1.99−1.90 (m, 2H), 1.47 (s, 9H), 1.40−1.28 (m, 2H). 13C NMR (126 MHz, MeOD) δ 162.35, 159.45, 154.98, 153.44, 147.35, 147.11, 141.31, 137.87, 137.60, 135.29, 129.05, 124.10, 120.17, 119.14, 117.92, 97.70, 79.69, 53.40, 42.05, 31.26, 27.27. 2003


ACS Omega

Article

N2-(3-(tert-Butyl)phenyl)-N4-isopropylpyrimidine-2,4-diamine (6b). To a mixture of 3f (0.15 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.30 M) under a nitrogen atmosphere at rt were added 3-(tert-butyl)aniline (0.22 mmol, 1.5 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 1 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6b as a colorless oil (0.027 g, 65%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 285 [M + H]+. 1 H NMR (500 MHz, CDCl3) δ 8.74 (br s, 1H), 7.63 (d, J = 31.1 Hz, 2H), 7.47 (d, J = 8.0 Hz, 1H), 7.35−7.22 (m, 2H), 7.14 (d, J = 7.9 Hz, 1H), 6.05 (d, J = 6.5 Hz, 1H), 4.23 (br s, 1H), 1.35 (d, J = 2.0 Hz, 9H), 1.30 (d, J = 8.0 Hz, 6H). 13C NMR (126 MHz, CDCl3) δ 161.95, 152.02, 137.97, 128.41, 120.65, 117.70, 117.59, 43.36, 34.77, 31.32, 22.53. N2-([1,1′-Biphenyl]-3-yl)-N4-isopropylpyrimidine-2,4-diamine (6c). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-aminobiphenyl (0.15 mmol, 1.5 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6c as a gray solid (0.020 g, 66%). TLC Rf 0.7 (10% MeOH/DCM). LC−MS (ESI) m/z: 305 [M + H]+. 1H NMR (400 MHz, chloroform-d) δ 7.81 (d, J = 8.3 Hz, 2H), 7.56−7.47 (m, 3H), 7.43 (d, J = 11.1 Hz, 1H), 7.35 (td, J = 8.2, 7.7, 1.7 Hz, 2H), 7.31−7.23 (m, 2H), 7.15 (dt, J = 7.7, 1.5 Hz, 1H), 5.76 (dd, J = 6.0, 1.3 Hz, 1H), 4.73 (br s, 1H), 4.01 (br s, 1H), 1.17 (d, J = 8.0 Hz, 6H). 13C NMR (101 MHz, CDCl3) δ 162.12, 159.25, 141.92, 141.38, 140.27, 129.09, 128.62, 127.23, 121.03, 118.25, 118.12, 42.89, 22.80. N4-Isopropyl-N2-(3-(pyridin-2-yl)phenyl)pyrimidine-2,4-diamine (6d). To a mixture of 3f (0.14 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.28 M) under a nitrogen atmosphere at rt were added 3-(2-pyridyl)aniline (0.15 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6d as a colorless oil (0.014 g, 33%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 306 [M + H]+. 1 H NMR (400 MHz, MeOD) δ 8.64 (d, J = 4.9 Hz, 1H), 8.36 (s, 1H), 7.99−7.83 (m, 2H), 7.67−7.70 (m, 2H), 7.64−7.54 (m, 1H), 7.49 (t, J = 7.9 Hz, 1H), 7.45−7.31 (m, 1H), 6.09 (d, J = 6.7 Hz, 1H), 4.33 (br s, 1H), 1.24 (d, J = 6.5 Hz, 6H). 13C NMR (101 MHz, MeOD) δ 163.57, 158.73, 150.33, 141.35, 140.40, 138.91, 130.44, 123.95, 123.43, 122.73, 122.69, 120.88, 101.41, 44.04, 22.46. N 4 -Isopropyl-N 2 -(3′-methoxy-[1,1′-biphenyl]-3-yl)pyrimidine-2,4-diamine (6e). To a mixture of 3f (0.070 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.14 M) under a nitrogen atmosphere at rt were added (3′-methoxybiphenyl-3-yl)amine HCl salt (0.084 mmol, 1.2 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 16 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6e as a colorless oil (0.013 g, 56%). TLC Rf 0.2 (50% EtOAc/hexanes + 1% MeOH). LC−MS (ESI) m/z: 335 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.09−7.88 (m, 2H), 7.74−7.63 (m, 2H), 7.53−7.40 (m, 2H), 7.40−7.27 (m, 3H), 7.07−6.92 (m, 1H), 5.96 (d, J = 8.0 Hz, 1H), 4.95 (d, J = 7.8 Hz, 1H), 4.21 (br s, 1H), 3.89 (s, 3H), 1.36 (d, J= 8.0 Hz, 6H). 13 C NMR (126 MHz, CDCl3) δ 162.10, 159.86, 159.03, 146.68,

142.90, 141.79, 140.14, 129.60, 129.08, 121.13, 119.76, 118.45, 118.20, 113.08, 112.58, 96.25, 55.31, 42.97, 22.76. Methyl 3′-((4-(isopropylamino)pyrimidin-2-yl)amino)[1,1′-biphenyl]-3-carboxylate (6f). To a mixture of 3f (0.12 mmol, 1.0 equiv) in MeOH (0.50 mL, 0.23 M) under a nitrogen atmosphere at rt were added 3′-amino-biphenyl-3-carboxylic acid methyl ester HCl (0.13 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. The reaction mixture was diluted with EtOAc (3 mL) and then washed sequentially with 1 N HCl (3 mL) and brine (3 mL). The organic phase was dried over magnesium sulfate and concentrated. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 6f as a white solid (0.015 g, 36%). TLC Rf 0.6 (10% MeOH/DCM). LC−MS (ESI) m/z: 363 [M + H]+. 1H NMR (400 MHz, CDCl3) δ 8.30 (d, J = 1.9 Hz, 1H), 8.05−7.87 (m, 3H), 7.80 (dt, J = 8.0, 1.4 Hz, 1H), 7.62−7.52 (m, 1H), 7.50 (t, J = 7.7 Hz, 1H), 7.38 (t, J = 7.9 Hz, 1H), 7.26−7.19 (m, 1H), 7.09 (s, 1H), 5.83 (d, J = 5.8 Hz, 1H), 4.63 (br s, 1H), 4.05 (br s, 1H), 3.95 (s, 3H), 1.24 (d, J = 6.4 Hz, 6H). 13C NMR (101 MHz, CDCl3) δ 167.08, 162.14, 159.85, 155.96, 141.74, 140.80, 140.73, 131.64, 130.58, 129.24, 128.70, 128.38, 128.31, 120.68, 118.40, 117.81, 52.17, 42.81, 22.82. N4-Isopropyl-N2-(3-(oxazol-2-yl)phenyl)pyrimidine-2,4-diamine (6g). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1,3-oxaxol-2-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6g as a colorless oil (0.005 g, 17%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 296 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.66 (t, J = 2.0 Hz, 1H), 7.99 (d, J = 0.9 Hz, 1H), 7.88−7.69 (m, 1H), 7.69−7.57 (m, 2H), 7.40 (t, J = 7.9 Hz, 1H), 7.31 (d, J = 0.9 Hz, 1H), 5.96 (d, J = 6.0 Hz, 1H), 4.33 (br s, 1H), 1.27 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, MeOD) δ 162.52, 162.41, 159.55, 153.55, 141.51, 139.19, 128.77, 127.53, 127.10, 120.97, 118.86, 116.51, 97.57, 41.90, 21.44. N4-Isopropyl-N2-(3-(thiazol-2-yl)phenyl)pyrimidine-2,4-diamine (6h). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1,3-thiazol-2-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6h as a colorless oil (0.004 g, 13%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 312 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.53 (t, J = 2.1 Hz, 1H), 7.87 (d, J = 3.3 Hz, 1H), 7.83−7.68 (m, 1H), 7.68−7.58 (m, 2H), 7.54 (d, J = 10.0 Hz, 1H), 7.38 (t, J = 7.9 Hz, 1H), 5.96 (d, J = 6.0 Hz, 1H), 4.35 (br s, 1H), 1.25 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, MeOD) δ 169.29, 162.43, 159.55, 153.50, 142.90, 141.60, 133.43, 128.90, 120.62, 119.18, 116.81, 97.61, 41.85, 21.44. N2-(3-(1H-Pyrazol-3-yl)phenyl)-N4-isopropylpyrimidine2,4-diamine (6i). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1H-pyrazol-3-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) was followed by evaporation, giving 6i as a white oil 2004


ACS Omega

Article

0.7 (10% MeOH/DCM). LC−MS (ESI) m/z: 305 [M + H]+. 1H NMR (400 MHz, chloroform-d) δ 8.05 (br s, 1H), 7.81 (br s, 1H), 7.73−7.63 (m, 2H), 7.63−7.48 (m, 4H), 7.48−7.37 (m, 2H), 7.34−7.28 (m, 1H), 5.93 (d, J = 6.2 Hz, 1H), 5.34 (br s, 1H), 4.07 (br s, 1H), 1.28 (d, J = 6.5 Hz, 6H). 13C NMR (101 MHz, CDCl3) δ 162.08, 140.77, 138.57, 135.42, 128.73, 127.41, 126.81, 126.72, 119.93, 43.25, 22.64. 4-((4-(Isopropylamino)pyrimidin-2-yl)amino)benzamide (6n). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 4aminobenzamide (0.15 mmol, 1.5 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6n as a white solid (0.013 g, 48%). TLC Rf 0.3 (10% MeOH/DCM). LC−MS (ESI) m/z: 272 [M + H]+. 1H NMR (500 MHz, MeOD) δ 7.86−7.77 (m, 5H), 5.99 (d, J = 6.1 Hz, 1H), 4.23 (s, 1H), 1.27 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, MeOD) δ 170.82, 162.40, 159.20, 153.30, 144.38, 128.12, 125.46, 117.72, 97.87, 41.96, 21.31. Biology. Biochemical Assays. Briefly, kinase reactions were conducted in triplicate, with a final assay volume of 10 μL, in black polystyrene 384-well plates (Corning #8849BC) using the Z′-LYTE Kinase Assay Kit (Tyr 2 peptide; Life Technologies). The reaction mixtures contained 500 μM ATP, 2 μM Tyr 2 peptide, and 6.25 or 12.50 nM recombinant human FLT3 (571− 993 (SignalChem) in buffer [50 mM HEPES (pH 7.5), 10 mM MgCl2, 1 mM EGTA, 0.01% Brij-35, 0.25 mM DTT]). A cocktail of FLT3, ATP, and peptide solution prepared in the abovedescribed buffer (10 μL) was added to the plates using an automated plate filler (Wellmate, Matrix). DMSO stock solutions of the test compounds were then added in a dilution series by pin transfer (V&P Scientific) in nanoliter volumes. After 1 h of incubation at 23 °C, the reaction mixtures were quenched and processed according to the Z′-LYTE kit protocol and read on an automated EnVision (Perkin-Elmer) plate reader using a 400 nm excitation filter and a 535 nm emission filter. Fluorescence emission ratio data were processed using a custom script written in Pipeline Pilot (Accelrys) to transform data by log10 and calculate percent inhibition normalized in comparison to the means of positive and negative controls. Dose−response curves were plotted using GraphPad Prism software. MV4-11 and BJ Cell Culture and Cytotoxicity Studies. BJ and MV4-11 cells were purchased from the American Type Culture Collection (ATCC, Manassas, Virginia). The cells were cultured in a humidified 5% CO2 incubator at 37 °C according to vendor recommendations. BJ cells are cultured in EMEM media and MV4-11 cells are cultured in IMDM media purchased from ATCC; both lines are supplemented with 10% fetal bovine serum (GE Healthcare Life Sciences, Hyclone Laboratories, Logan, Utah). The cells were routinely tested for mycoplasma with the MycoAlert Mycoplasma Detection Kit (Lonza, Walkersville, MD). Approximately 1000 BJ or 500 MV4-11 exponentially growing cells were plated per well (30 μL) in white polystyrene flatbottom sterile 384-well tissue-culture-treated plates (Corning, Tewksbury, MA) and incubated overnight at 37 °C in a humidified 5% CO2 incubator. Compound solutions (DMSO) were pin-transferred (V&P Scientific, San Diego, CA) the following day. Inhibition of proliferation was determined following 72 h of incubation using Promega Cell Titer Glo Reagent according to the manufacturer’s recommendations.

(0.020 g, 68%). TLC Rf 0.3 (10% MeOH/DCM). LC−MS (ESI) m/z: 295 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.12 (br s, 1H), 7.81−7.71 (m, 1H), 7.67 (br s, 1H), 7.61−7.54 (m, 1H), 7.31−7.38 (m, 2H), 6.65 (br s, 1H), 5.94 (d, J = 6.1 Hz, 1H), 4.26 (br s, 1H), 1.24 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, MeOD) δ 162.44, 159.53, 153.19, 151.87, 140.94, 133.84, 129.47, 128.57, 118.84, 116.64, 101.95, 97.35. N2-(3-(1H-Imidazol-1-yl)phenyl)-N4-isopropylpyrimidine2,4-diamine (6j). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(1H-imidazol-1-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 6 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/ DCM) and then reversed-phase chromatography (MeCN/ water) was followed by evaporation, giving 6j as a colorless oil (0.004 g, 14%). LC−MS (ESI) m/z: 295 [M + H]+. 1H NMR (500 MHz, MeOD) δ 8.28 (br s, 1H), 8.15 (br s, 1H), 7.75 (br s, 2H), 7.54−7.56 (m, 1H), 7.48 (t, J = 8.0 Hz, 1H), 7.45−7.09 (m, 2H), 6.07 (d, J = 5.8 Hz, 1H), 4.24 (br s, 1H), 1.25 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, MeOD) δ 162.22, 156.66, 147.86, 140.93, 137.76, 129.90, 118.82, 115.17, 112.80, 98.35, 42.50, 21.05. N4-Isopropyl-N2-(3-(pyrazin-2-yl)phenyl)pyrimidine-2,4-diamine (6k). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(pyrazin-2-yl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6k as a colorless foam (0.011 g, 36%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 307 [M + H]+. 1H NMR (500 MHz, MeOD) δ 9.09 (d, J = 1.5 Hz, 1H), 8.68 (dd, J = 2.6, 1.6 Hz, 1H), 8.63 (s, 1H), 7.74 (br s, 1H), 7.70− 7.61 (m, 2H), 7.43 (t, J = 7.9 Hz, 1H), 5.95 (d, J = 6.0 Hz, 1H), 4.45−4.17 (m, 1H), 1.25 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, MeOD) δ 162.41, 159.46, 153.34, 144.14, 142.44, 141.78, 141.45, 136.42, 128.86, 120.48, 119.72, 117.46, 97.33, 41.84, 21.43. N4-isopropyl-N2-(3-(pyridin-4-yl)phenyl)pyrimidine-2,4-diamine (6l). To a mixture of 3f (0.10 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.20 M) under a nitrogen atmosphere at rt were added 3-(4-pyridyl)aniline (0.11 mmol, 1.1 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 3 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6l as an orange solid (0.002 g, 7%). TLC Rf 0.5 (10% MeOH/DCM). LC−MS (ESI) m/z: 306 [M + H]+. 1H NMR (500 MHz, CDCl3) δ 8.74−8.59 (m, 2H), 8.07 (br s, 1H), 7.95 (d, J = 5.7 Hz, 1H), 7.64−7.58 (m, 1H), 7.58−7.51 (m, 2H), 7.43 (t, J = 7.9 Hz, 1H), 7.27 (s, 1H), 7.14 (br s, 1H), 5.88 (d, J = 5.8 Hz, 1H), 4.69 (br s, 1H), 4.10 (br s, 1H), 1.28 (d, J = 6.5 Hz, 6H). 13C NMR (126 MHz, CDCl3) δ 162.12, 159.56, 155.58, 150.15, 148.67, 140.88, 138.85, 129.48, 121.79, 120.44, 119.58, 117.51, 42.79, 22.85. N2-([1,1′-Biphenyl]-4-yl)-N4-isopropylpyrimidine-2,4-diamine (6m). To a mixture of 3f (0.12 mmol, 1.0 equiv) in EtOH (0.50 mL, 0.23 M) under a nitrogen atmosphere at rt were added 4-aminobiphenyl (0.18 mmol, 1.5 equiv) and a drop of 1 N HCl. The reaction mixture was heated to reflux and stirred at that temperature for 2 h; it was then cooled to rt. Purification using automated flash chromatography (MeOH/DCM) was followed by evaporation, giving 6m as a white solid (0.024 g, 68%). TLC Rf 2005


ACS Omega

Article

The processed plasma concentration−time data were analyzed using noncompartmental analysis (NCA) in WinNonlin 6.0 with the Plasma (200−202) model type; all standard NCA parameters were estimated via default software settings, using predicted parameter estimates. If at least two-thirds of the observed concentrations were below the LLOQ, the mean concentration was treated as missing. The AUC was calculated with the linear trapezoidal, linear interpolation rule using mean concentrations and nominal times. The terminal elimination rate (Lambda_z) and half-life (HL_Lambda_z) were determined using the default “Best Fit” method. The predicted AUC from the last time point to infinity (AUCINF_pred) was calculated as AUClast plus Clast(pred)/ Lambda_z. CL was calculated as Dose/AUCINF_pred.

Luminescence was measured on an Envision plate reader (Perkin-Elmer). MOLM13 Cell Culture. Parental MOLM13FLT3‑ITD cells harboring FLT3-ITD (DSMZ, Brunswick, Germany) and MOLM13FLT3‑ITD/D835Y cells carrying an additional D835Y mutation were maintained in RPMI 1640 medium supplemented with 10% fetal bovine serum (Life Technologies, Grand Island, NY) in a humidified 5% CO2 incubator at 37 °C.9,50 The MOLM13FLT3‑ITD/D835Ycells were maintained in the presence of 5μM tandutinib (LC Laboratories, Woburn, MA) and removed from the presence of the drug 3 days prior to experimentation MOLM13 Cell Viability. Cell viability upon drug treatment was assessed using the MTT reagent (Roche Applied Science, Indianapolis, IN), as previously described.50 Briefly, the cells were plated overnight in a humidified 5% CO2 incubator at 37 °C. On day 2, the cells were treated with DMSO or drug reconstituted in DMSO for 72 h. The drug concentrations used were as follows: compound 1, 1000−167 nM; compound 5e 1600−6.55 nM; compound 6a, 1000−6.55 nM; and compound 6k, 1500−0.98 nM. Three individual experiments were conducted, with six replicates each. Cell viability was quantified as relative percentage to DMSO-treated cells, and cell viability curves were generated using GraphPad Prism software version 6.07. Western Blot Analysis. Whole-cell lysates were made with radioimmunoprecipitation assay buffer (20 mM Tris−HCl (pH 7.5), 150 mM NaCl, 1 mM Na2EDTA, 1 mM EGTA, 1% NP-40, 1% sodium deoxycholate, 0.1% SDS, and protease and phosphatase inhibitors). Immunoprecipitation was carried out with anti-FLT3 antibody and Protein A/G agarose beads from Santa Cruz Biotechnology (Dallas, TX). Invitrogen Bis−trisgradient mini or midi gels were used for western blot analysis, followed by detection with enhanced chemiluminescence (ECL) reagent. Primary antibodies used were from Cell Signaling Technology (Danvers, MA): FLT3, phospho-FLT3, STAT5, and phospho-STAT5. Secondary antibodies were from Jackson Immunoresearch and Cell Signaling Technology. In Vivo Pharmacokinetic Study. All animal studies were carried out under a St Jude Children’s Research Hospital IACUC-approved protocol (#477). Female C57BL/6 mice, with an average weight of 18 g, were purchased from Charles River Laboratories (Wilmington, MA). Food and water were provided ad libitum. Twenty-four mice were divided into four dosage groups: 0, 3, 5, and 10 mg/kg. For each mouse, 0.1 mL of the compound suspension in formulation (5:50:45, EtOH/ PEG400/PBS (pH 7.4), v/v/v) was administered by i.p. injection. Blood (0.1 mL) was collected retro-orbitally from a different mouse within each dosage group at 5, 15, and 30 min and 1, 4, and 24 h. The animals were euthanized via cardiac puncture after anesthesia at 48 h post injection. The blood samples were treated with 10 μL of EDTA sodium solution to prevent coagulation. The blood samples were kept under ice and centrifuged for 3 min at 13 200 rpm in a desktop centrifuge to collect plasma. The plasma samples (25 μL) were combined with 75 μL of internal standard (2 μM warfarin) in acetonitrile in a 96well plate and centrifuged at 4000 rpm for 20 min at 4 °C. The supernatant (40 μL) was collected and mixed with two parts of deionized water and centrifuged again at 4000 rpm for 20 min at 4 °C. The plasma concentration was determined using an LC/ MS−MS assay with multiple reaction monitoring detection (AB Sciex, Framingham, MA). The LC/MS−MS method is provided in the Supporting Information. The assay limit of quantification (LLOQ) was 13.7 nM in plasma.

■

ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsomega.7b00144. Experimental procedures for ADME and MTD studies; additional experimental procedures for synthesis and characterization of compounds; additional synthetic schemes for preparation of intermediates; KinomeScan analysis for compound 1; growth inhibition data against the BJ cell line for all compounds; FLT3 inhibition and MV4-11 cell proliferation data, including CI 95; solubility and permeability data for selected compounds; cellular permeability and PGP efflux assay data; in vivo blood chemistry data after i.p. dosing of compound 5e in mice (PDF) Experimental data for compounds 1, 4−6, 9, 13, 14, 16, 17, and 19−22 (XLSX)

■

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected]. Phone: 859-257-5290. Fax: 859-2572128. ORCID

R. Kiplin Guy: 0000-0002-9638-2060 Present Address §

Department of Pharmaceutical Sciences, University of Kentucky College of Pharmacy, 214H BioPharm Complex, Lexington, Kentucky 40536, United States (R.K.G. and Y.C.) Author Contributions

The manuscript was prepared through contributions of all authors. Notes

The authors declare no competing financial interest.

■

ACKNOWLEDGMENTS This work was supported by the Department of Defense (CA093469P2), NCI (CA138744-07), St. Jude Children’s Research Hospital, and the American Lebanese Syrian Associated Charities (ALSAC).

■

ABBREVIATIONS FLT3, FMS-like tyrosine kinase; SAR, structure−activity relationship; AML, acute myelogenous leukemia; FL, FLT3 ligand; ITD, internal tandem duplication; JM, juxtamembrane; wt, wild-type; DFG, Asp-Phe-Gly; SPR, structure−property relationship; CI, confidence interval; PGP, P-glycoprotein; TKD, 2006


ACS Omega

Article

(15) Cloos, J.; Goemans, B. F.; Hess, C. J.; van Oostveen, J. W.; Waisfisz, Q.; Corthals, S.; de Lange, D.; Boeckx, N.; Hahlen, K.; Reinhardt, D.; Creutzig, U.; Schuurhuis, G. J.; Zwaan, C. M.; Kaspers, G. J. Stability and prognostic influence of FLT3 mutations in paired initial and relapsed AML samples. Leukemia 2006, 20, 1217−1220. (16) Meshinchi, S.; Appelbaum, F. R. Structural and functional alterations of FLT3 in acute myeloid leukemia. Clin. Cancer Res. 2009, 15, 4263−4269. (17) Stone, R. M.; DeAngelo, D. J.; Klimek, V.; Galinsky, I.; Estey, E.; Nimer, S. D.; Grandin, W.; Lebwohl, D.; Wang, Y.; Cohen, P.; Fox, E. A.; Neuberg, D.; Clark, J.; Gilliland, D. G.; Griffin, J. D. Patients with acute myeloid leukemia and an activating mutation in FLT3 respond to a small-molecule FLT3 tyrosine kinase inhibitor, PKC412. Blood 2005, 105, 54−60. (18) Stone, R. M.; Fischer, T.; Paquette, R.; Schiller, G.; Schiffer, C. A.; Ehninger, G.; Cortes, J.; Kantarjian, H. M.; DeAngelo, D. J.; HuntsmanLabed, A.; Dutreix, C.; del Corral, A.; Giles, F. Phase IB study of the FLT3 kinase inhibitor midostaurin with chemotherapy in younger newly diagnosed adult patients with acute myeloid leukemia. Leukemia 2012, 26, 2061−2068. (19) Fischer, T.; Stone, R. M.; Deangelo, D. J.; Galinsky, I.; Estey, E.; Lanza, C.; Fox, E.; Ehninger, G.; Feldman, E. J.; Schiller, G. J.; Klimek, V. M.; Nimer, S. D.; Gilliland, D. G.; Dutreix, C.; Huntsman-Labed, A.; Virkus, J.; Giles, F. J. Phase IIB trial of oral Midostaurin (PKC412), the FMS-like tyrosine kinase 3 receptor (FLT3) and multi-targeted kinase inhibitor, in patients with acute myeloid leukemia and high-risk myelodysplastic syndrome with either wild-type or mutated FLT3. J. Clin. Oncol. 2010, 28, 4339−4345. (20) Smith, B. D.; Levis, M.; Beran, M.; Giles, F.; Kantarjian, H.; Berg, K.; Murphy, K. M.; Dauses, T.; Allebach, J.; Small, D. Single-agent CEP701, a novel FLT3 inhibitor, shows biologic and clinical activity in patients with relapsed or refractory acute myeloid leukemia. Blood 2004, 103, 3669−3676. (21) Knapper, S.; Burnett, A. K.; Littlewood, T.; Kell, W. J.; Agrawal, S.; Chopra, R.; Clark, R.; Levis, M. J.; Small, D. A phase 2 trial of the FLT3 inhibitor lestaurtinib (CEP701) as first-line treatment for older patients with acute myeloid leukemia not considered fit for intensive chemotherapy. Blood 2006, 108, 3262−3270. (22) Levis, M.; Ravandi, F.; Wang, E. S.; Baer, M. R.; Perl, A.; Coutre, S.; Erba, H.; Stuart, R. K.; Baccarani, M.; Cripe, L. D.; Tallman, M. S.; Meloni, G.; Godley, L. A.; Langston, A. A.; Amadori, S.; Lewis, I. D.; Nagler, A.; Stone, R.; Yee, K.; Advani, A.; Douer, D.; Wiktor-Jedrzejczak, W.; Juliusson, G.; Litzow, M. R.; Petersdorf, S.; Sanz, M.; Kantarjian, H. M.; Sato, T.; Tremmel, L.; Bensen-Kennedy, D. M.; Small, D.; Smith, B. D. Results from a randomized trial of salvage chemotherapy followed by lestaurtinib for patients with FLT3 mutant AML in first relapse. Blood 2011, 117, 3294−3301. (23) Smith, C. C.; Lasater, E. A.; Lin, K. C.; Wang, Q.; McCreery, M. Q.; Stewart, W. K.; Damon, L. E.; Perl, A. E.; Jeschke, G. R.; Sugita, M.; Carroll, M.; Kogan, S. C.; Kuriyan, J.; Shah, N. P. Crenolanib is a selective type I pan-FLT3 inhibitor. Proc. Natl. Acad. Sci. U.S.A. 2014, 111, 5319−5324. (24) Lewis, N. L.; Lewis, L. D.; Eder, J. P.; Reddy, N. J.; Guo, F.; Pierce, K. J.; Olszanski, A. J.; Cohen, R. B. Phase I study of the safety, tolerability, and pharmacokinetics of oral CP-868,596, a highly specific platelet-derived growth factor receptor tyrosine kinase inhibitor in patients with advanced cancers. J. Clin. Oncol. 2009, 27, 5262−5269. (25) Michael, M.; Vlahovic, G.; Khamly, K.; Pierce, K. J.; Guo, F.; Olszanski, A. J. Phase Ib study of CP-868,596, a PDGFR inhibitor, combined with docetaxel with or without axitinib, a VEGFR inhibitor. Br. J. Cancer 2010, 103, 1554−1561. (26) Cortes, J.; Kantarjian, H. How I treat newly diagnosed chronic phase CML. Blood 2012, 120, 1390−1397. (27) DeAngelo, D. J.; Stone, R. M.; Heaney, M. L.; Nimer, S. D.; Paquette, R. L.; Klisovic, R. B.; Caligiuri, M. A.; Cooper, M. R.; Lecerf, J. M.; Karol, M. D.; Sheng, S.; Holford, N.; Curtin, P. T.; Druker, B. J.; Heinrich, M. C. Phase 1 clinical results with tandutinib (MLN518), a novel FLT3 antagonist, in patients with acute myelogenous leukemia or

tyrosine kinase domain; i.p, intraperitoneal; DCM, dichloromethane; EtOAc, ethyl acetate; EtOH, ethanol; MeOH, methanol

■

REFERENCES

(1) Wander, S. A.; Levis, M. J.; Fathi, A. T. The evolving role of FLT3 inhibitors in acute myeloid leukemia: quizartinib and beyond. Ther. Adv. Hematol. 2014, 5, 65−77. (2) Takahashi, S. Downstream molecular pathways of FLT3 in the pathogenesis of acute myeloid leukemia: biology and therapeutic implications. J. Hematol. Oncol. 2011, 4, 13. (3) Gilliland, D. G.; Griffin, J. D. The roles of FLT3 in hematopoiesis and leukemia. Blood 2002, 100, 1532−1542. (4) deLapeyrière, O.; Naquet, P.; Planche, J.; Marchetto, S.; Rottapel, R.; Gambarelli, D.; Rosnet, O.; Birnbaum, D. Expression of Flt3 Tyrosine Kinase Receptor Gene in Mouse Hematopoietic and Nervous Tissues. Differentiation 1995, 58, 351−359. (5) Dosil, M.; Wang, S.; Lemischka, I. R. Mitogenic signalling and substrate specificity of the Flk2/Flt3 receptor tyrosine kinase in fibroblasts and interleukin 3-dependent hematopoietic cells. Mol. Cell. Biol. 1993, 13, 6572−6585. (6) Hayakawa, F.; Towatari, M.; Kiyoi, H.; Tanimoto, M.; Kitamura, T.; Saito, H.; Naoe, T. Tandem-duplicated Flt3 constitutively activates STAT5 and MAP kinase and introduces autonomous cell growth in IL3-dependent cell lines. Oncogene 2000, 19, 624−631. (7) Mizuki, M.; Fenski, R.; Halfter, H.; Matsumura, I.; Schmidt, R.; Muller, C.; Gruning, W.; Kratz-Albers, K.; Serve, S.; Steur, C.; Buchner, T.; Kienast, J.; Kanakura, Y.; Berdel, W. E.; Serve, H. Flt3 mutations from patients with acute myeloid leukemia induce transformation of 32D cells mediated by the Ras and STAT5 pathways. Blood 2000, 96, 3907−3914. (8) Zhang, S.; Broxmeyer, H. E. p85 subunit of PI3 kinase does not bind to human Flt3 receptor, but associates with SHP2, SHIP, and a tyrosine-phosphorylated 100-kDa protein in Flt3 ligand-stimulated hematopoietic cells. Biochem. Biophys. Res. Commun. 1999, 254, 440− 445. (9) Yokota, S.; Kiyoi, H.; Nakao, M.; Iwai, T.; Misawa, S.; Okuda, T.; Sonoda, Y.; Abe, T.; Kahsima, K.; Matsuo, Y.; Naoe, T. Internal tandem duplication of the FLT3 gene is preferentially seen in acute myeloid leukemia and myelodysplastic syndrome among various hematological malignancies. A study on a large series of patients and cell lines. Leukemia 1997, 11, 1605−1609. (10) Kiyoi, H.; Naoe, T.; Yokota, S.; Nakao, M.; Minami, S.; Kuriyama, K.; Takeshita, A.; Saito, K.; Hasegawa, S.; Shimodaira, S.; Tamura, J.; Shimazaki, C.; Matsue, K.; Kobayashi, H.; Arima, N.; Suzuki, R.; Morishita, H.; Saito, H.; Ueda, R.; Ohno, R. Internal tandem duplication of FLT3 associated with leukocytosis in acute promyelocytic leukemia. Leukemia Study Group of the Ministry of Health and Welfare (Kohseisho). Leukemia 1997, 11, 1447−1452. (11) Yamamoto, Y.; Kiyoi, H.; Nakano, Y.; Suzuki, R.; Kodera, Y.; Miyawaki, S.; Asou, N.; Kuriyama, K.; Yagasaki, F.; Shimazaki, C.; Akiyama, H.; Saito, K.; Nishimura, M.; Motoji, T.; Shinagawa, K.; Takeshita, A.; Saito, H.; Ueda, R.; Ohno, R.; Naoe, T. Activating mutation of D835 within the activation loop of FLT3 in human hematologic malignancies. Blood 2001, 97, 2434−2439. (12) Nakao, M.; Yokota, S.; Iwai, T.; Kaneko, H.; Horiike, S.; Kashima, K.; Sonoda, Y.; Fujimoto, T.; Misawa, S. Internal tandem duplication of the flt3 gene found in acute myeloid leukemia. Leukemia 1996, 10, 1911−1918. (13) Abu-Duhier, F. M.; Goodeve, A. C.; Wilson, G. A.; Care, R. S.; Peake, I. R.; Reilly, J. T. Identification of novel FLT-3 Asp835 mutations in adult acute myeloid leukaemia. Br. J. Haematol. 2001, 113, 983−988. (14) Taketani, T.; Taki, T.; Sugita, K.; Furuichi, Y.; Ishii, E.; Hanada, R.; Tsuchida, M.; Sugita, K.; Ida, K.; Hayashi, Y. FLT3 mutations in the activation loop of tyrosine kinase domain are frequently found in infant ALL with MLL rearrangements and pediatric ALL with hyperdiploidy. Blood 2004, 103, 1085−1088. 2007


ACS Omega

Article

high-risk myelodysplastic syndrome: safety, pharmacokinetics, and pharmacodynamics. Blood 2006, 108, 3674−3681. (28) De Angelo, D. J.; Stone, R. M.; Heaney, M. L.; Nimer, S. D.; Paquette, R.; Bruner-Klisovic, R.; Caligiuri, M. A.; Cooper, M. R.; LeCerf, J. M.; Iyer, G. Phase II evaluation of the tyrosine kinase inhibitor MLN518 in patients with acute myeloid leukemia (AML) bearing a FLT3 internal tandem duplication (ITD) mutation. Blood 2004, 104, 496a. (29) Knapper, S.; White, P.; Levis, M. J.; Hills, R. K.; Russell, N. H.; Burnett, A. The Efficacy of the FLT3 Inhibitor Lestaurtinib in AML Depends on Adequate Plasma Inhibitory Activity (PIA), and Is Unaffected by Rising FLT Ligand Levels: An Update of the NCRI AML15 & 17 Trials. Blood 2011, 118, 194. (30) O’Farrell, A. M.; Foran, J. M.; Fiedler, W.; Serve, H.; Paquette, R. L.; Cooper, M. A.; Yuen, H. A.; Louie, S. G.; Kim, H.; Nicholas, S.; Heinrich, M. C.; Berdel, W. E.; Bello, C.; Jacobs, M.; Scigalla, P.; Manning, W. C.; Kelsey, S.; Cherrington, J. M. An innovative phase I clinical study demonstrates inhibition of FLT3 phosphorylation by SU11248 in acute myeloid leukemia patients. Clin. Cancer Res. 2003, 9, 5465−5476. (31) Fiedler, W.; Serve, H.; Dohner, H.; Schwittay, M.; Ottmann, O. G.; O’Farrell, A. M.; Bello, C. L.; Allred, R.; Manning, W. C.; Cherrington, J. M.; Louie, S. G.; Hong, W.; Brega, N. M.; Massimini, G.; Scigalla, P.; Berdel, W. E.; Hossfeld, D. K. A phase 1 study of SU11248 in the treatment of patients with refractory or resistant acute myeloid leukemia (AML) or not amenable to conventional therapy for the disease. Blood 2005, 105, 986−993. (32) Fiedler, W.; Kayser, S.; Kebenko, M.; Krauter, J.; Salih, H. R.; Gotze, K.; Spath, D.; Gohring, G.; Teleanu, V.; Dohner, K.; Ganser, A.; Dohner, H.; Schlenk, R. F. Sunitinib and Intensive Chemotherapy in Patients with Acute Myeloid Leukemia and Activating FLT3 Mutations: Results of the AMLSG 10-07 Study (ClinicalTrials.gov No. NCT00783653). Blood 2012, 120, 1483. (33) Zhang, W.; Konopleva, M.; Shi, Y. X.; McQueen, T.; Harris, D.; Ling, X. Y.; Estrov, Z.; Quintas-Cardama, A.; Small, D.; Cortes, J.; Andreeff, M. Mutant FLT3: A direct target of sorafenib in acute myelogenous leukemia. J. Natl. Cancer Inst. 2008, 100, 184−198. (34) Metzelder, S. K.; Schroeder, T.; Finck, A.; Scholl, S.; Fey, M.; Gotze, K.; Linn, Y. C.; Kroger, M.; Reiter, A.; Salih, H. R.; Heinicke, T.; Stuhlmann, R.; Muller, L.; Giagounidis, A.; Meyer, R. G.; Brugger, W.; Vohringer, M.; Dreger, P.; Mori, M.; Basara, N.; Schafer-Eckart, K.; Schultheis, B.; Baldus, C.; Neubauer, A.; Burchert, A. High activity of sorafenib in FLT3-ITD-positive acute myeloid leukemia synergizes with allo-immune effects to induce sustained responses. Leukemia 2012, 26, 2353−2359. (35) Pratz, K. W.; Cho, E.; Levis, M. J.; Karp, J. E.; Gore, S. D.; McDevitt, M.; Stine, A.; Zhao, M.; Baker, S. D.; Carducci, M. A.; Wright, J. J.; Rudek, M. A.; Smith, B. D. A pharmacodynamic study of sorafenib in patients with relapsed and refractory acute leukemias. Leukemia 2010, 24, 1437−1444. (36) Ravandi, F.; Cortes, J. E.; Jones, D.; Faderl, S.; Garcia-Manero, G.; Konopleva, M. Y.; O’Brien, S.; Estrov, Z.; Borthakur, G.; Thomas, D.; Pierce, S. R.; Brandt, M.; Byrd, A.; Bekele, B. N.; Pratz, K.; Luthra, R.; Levis, M.; Andreeff, M.; Kantarjian, H. M. Phase I/II Study of Combination Therapy With Sorafenib, Idarubicin, and Cytarabine in Younger Patients With Acute Myeloid Leukemia. J. Clin. Oncol. 2010, 28, 1856−1862. (37) Grunwald, M. R.; Levis, M. J. FLT3 inhibitors for acute myeloid leukemia: a review of their efficacy and mechanisms of resistance. Int. J. Hematol. 2013, 97, 683−694. (38) Randhawa, J. K.; Kantarjian, H. M.; Borthakur, G.; Thompson, P. A.; Konopleva, M.; Daver, N.; Pemmaraju, N.; Jabbour, E.; Kadia, T. M.; Estrov, Z.; Ramachandran, A.; Paradela, J.; Andreef, M.; Levis, M.; Ravandi, F.; Cortes, J. E. Results of a Phase II Study of Crenolanib in Relapsed/Refractory Acute Myeloid Leukemia Patients (Pts) with Activating FLT3 Mutations. Blood 2014, 124, 389. (39) Zarrinkar, P. P.; Gunawardane, R. N.; Cramer, M. D.; Gardner, M. F.; Brigham, D.; Belli, B.; Karaman, M. W.; Pratz, K. W.; Pallares, G.; Chao, Q.; Sprankle, K. G.; Patel, H. K.; Levis, M.; Armstrong, R. C.;

James, J.; Bhagwat, S. S. AC220 is a uniquely potent and selective inhibitor of FLT3 for the treatment of acute myeloid leukemia (AML). Blood 2009, 114, 2984−92. (40) Zarrinkar, P.; Armstrong, R.; Gunawardane, R.; James, J.; Karaman, M.; Bhagwat, S. Characterization of the biochemical and cellular activity of the second-generation FLT3 inhibitor AC220. Cancer Res. 2009, 69, No. 1787. (41) Cortes, J. E.; Perl, A. E.; Dombret, H.; Kayser, S.; Steffen, B.; Rousselot, P.; Martinelli, G.; Estey, E. H.; Burnett, A. K.; Gammon, G.; Trone, D.; Leo, E.; Levis, M. J. Final Results of a Phase 2 Open-Label, Monotherapy Efficacy and Safety Study of Quizartinib (AC220) in Patients ≥ 60 Years of Age with FLT3 ITD Positive or Negative Relapsed/Refractory Acute Myeloid Leukemia. Blood 2012, 120, 48. (42) Cortes, J. E.; Kantarjian, H. M.; Foran, J. M.; Ghirdaladze, D.; Zodelava, M.; Borthakur, G.; Gammon, G.; Trone, D.; Armstrong, R. C.; James, J.; Levis, M. J. Final Results of A Phase 1 Study Investigating the Safety, Tolerability, Pharmacokinetics, and Pharmacodynamics of Quizartinib (AC220) Administered Daily to Patients with Relapsed or Refractory Acute Myeloid Leukemia Irrespective of FLT3-ITD Status. Blood 2012, 120, 1507. (43) Kindler, T.; Lipka, D. B.; Fischer, T. FLT3 as a therapeutic target in AML: still challenging after all these years. Blood 2010, 116, 5089− 5102. (44) Weisberg, E.; Sattler, M.; Ray, A.; Griffin, J. D. Drug resistance in mutant FLT3-positive AML. Oncogene 2010, 29, 5120−5134. (45) Baker, S. D.; Zimmerman, E. I.; Wang, Y. D.; Orwick, S.; Zatechka, D. S.; Buaboonnam, J.; Neale, G. A.; Olsen, S. R.; Enemark, E. J.; Shurtleff, S.; Rubnitz, J. E.; Mullighan, C. G.; Inaba, H. Emergence of polyclonal FLT3 tyrosine kinase domain mutations during sequential therapy with sorafenib and sunitinib in FLT3-ITD-positive acute myeloid leukemia. Clin. Cancer Res. 2013, 19, 5758−68. (46) Smith, C. C.; Lin, K.; Stecula, A.; Sali, A.; Shah, N. P. FLT3 D835 mutations confer differential resistance to type II FLT3 inhibitors. Leukemia 2015, 29, 2390−2392. (47) Smith, C. C.; Zhang, C.; Lin, K. C.; Lasater, E. A.; Zhang, Y.; Massi, E.; Damon, L. E.; Pendleton, M.; Bashir, A.; Sebra, R.; Perl, A.; Kasarskis, A.; Shellooe, R.; Tsang, G.; Carias, H.; Powell, B.; Burton, E. A.; Matusow, B.; Zhang, J.; Spevak, W.; Ibrahim, P. N.; Le, M. H.; Hsu, H. H.; Habets, G.; West, B. L.; Bollag, G.; Shah, N. P. Characterizing and Overriding the Structural Mechanism of the Quizartinib-Resistant FLT3 “Gatekeeper” F691L Mutation with PLX3397. Cancer Discovery 2015, 5, 668−679. (48) Zorn, J. A.; Wang, Q.; Fujimura, E.; Barros, T.; Kuriyan, J. Crystal Structure of the FLT3 Kinase Domain Bound to the Inhibitor Quizartinib (AC220). PLoS One 2015, 10, No. e0121177. (49) von Bubnoff, N.; Engh, R. A.; Aberg, E.; Sanger, J.; Peschel, C.; Duyster, J. FMS-like tyrosine kinase 3-internal tandem duplication tyrosine kinase inhibitors display a nonoverlapping profile of resistance mutations in vitro. Cancer Res. 2009, 69, 3032−3041. (50) Zimmerman, E. I.; Turner, D. C.; Buaboonnam, J.; Hu, S.; Orwick, S.; Roberts, M. S.; Janke, L. J.; Ramachandran, A.; Stewart, C. F.; Inaba, H.; Baker, S. D. Crenolanib is active against models of drug-resistant FLT3-ITD-positive acute myeloid leukemia. Blood 2013, 122, 3607− 3615. (51) Kinase Profiling Service: DiscoveRx KINOMEscan. http://www. discoverx.com/home. (52) Fabian, M. A.; Biggs, W. H., 3rd; Treiber, D. K.; Atteridge, C. E.; Azimioara, M. D.; Benedetti, M. G.; Carter, T. A.; Ciceri, P.; Edeen, P. T.; Floyd, M.; Ford, J. M.; Galvin, M.; Gerlach, J. L.; Grotzfeld, R. M.; Herrgard, S.; Insko, D. E.; Insko, M. A.; Lai, A. G.; Lelias, J. M.; Mehta, S. A.; Milanov, Z. V.; Velasco, A. M.; Wodicka, L. M.; Patel, H. K.; Zarrinkar, P. P.; Lockhart, D. J. A small molecule-kinase interaction map for clinical kinase inhibitors. Nat. Biotechnol. 2005, 23, 329−336. (53) Karaman, M. W.; Herrgard, S.; Treiber, D. K.; Gallant, P.; Atteridge, C. E.; Campbell, B. T.; Chan, K. W.; Ciceri, P.; Davis, M. I.; Edeen, P. T.; Faraoni, R.; Floyd, M.; Hunt, J. P.; Lockhart, D. J.; Milanov, Z. V.; Morrison, M. J.; Pallares, G.; Patel, H. K.; Pritchard, S.; Wodicka, L. M.; Zarrinkar, P. P. A quantitative analysis of kinase inhibitor selectivity. Nat. Biotechnol. 2008, 26, 127−132. 2008


ACS Omega

Article

(54) Davis, M. I.; Hunt, J. P.; Herrgard, S.; Ciceri, P.; Wodicka, L. M.; Pallares, G.; Hocker, M.; Treiber, D. K.; Zarrinkar, P. P. Comprehensive analysis of kinase inhibitor selectivity. Nat. Biotechnol. 2011, 29, 1046− 1051. (55) Z′LYTE Assay Kits: ThermoFisher. https://www.thermofisher. com/us/en/home/industrial/pharma-biopharma/drug-discoverydevelopment/target-and-lead-identification-and-validation/ kinasebiology/kinase-activity-assays/z-lyte.html. (56) Fabbro, D.; Ruetz, S.; Buchdunger, E.; Cowan-Jacob, S. W.; Fendrich, G.; Liebetanz, J.; Mestan, J.; O’Reilly, T.; Traxler, P.; Chaudhuri, B.; Fretz, H.; Zimmermann, J.; Meyer, T.; Caravatti, G.; Furet, P.; Manley, P. W. Protein kinases as targets for anticancer agents: from inhibitors to useful drugs. Pharmacol. Ther. 2002, 93, 79−98. (57) Di Gion, P.; Kanefendt, F.; Lindauer, A.; Scheffler, M.; Doroshyenko, O.; Fuhr, U.; Wolf, J.; Jaehde, U. Clinical Pharmacokinetics of Tyrosine Kinase Inhibitors Focus on Pyrimidines, Pyridines and Pyrroles. Clin. Pharmacokinet. 2011, 50, 551−603. (58) Lawrence, H. R.; Martin, M. P.; Luo, Y.; Pireddu, R.; Yang, H.; Gevariya, H.; Ozcan, S.; Zhu, J. Y.; Kendig, R.; Rodriguez, M.; Elias, R.; Cheng, J. Q.; Sebti, S. M.; Schonbrunn, E.; Lawrence, N. J. Development of o-chlorophenyl substituted pyrimidines as exceptionally potent aurora kinase inhibitors. J. Med. Chem. 2012, 55, 7392−7416. (59) Albrecht, F.; Sowada, O.; Fistikci, M.; Boysen, M. M. K. Heteroarylboronates in Rhodium-Catalyzed 1,4-Addition to Enones. Org. Lett. 2014, 16, 5212−5215. (60) Bhattacharyya, S.; Neidigh, K. A.; Avery, M. A.; Williamson, J. S. Selective monoalkylation of ammonia: A high throughput synthesis of primary amines. Synlett 1999, 1999, 1781−1783. (61) Liu, X.; Wright, M.; Hop, C. E. Rational use of plasma protein and tissue binding data in drug design. J. Med. Chem. 2014, 57, 8238−8248. (62) Kinase Kd Determination: DiscoveRx KdELECT. http://www. discoverx.com/home. (63) Wodicka, L. M.; Ciceri, P.; Davis, M. I.; Hunt, J. P.; Floyd, M.; Salerno, S.; Hua, X. H.; Ford, J. M.; Armstrong, R. C.; Zarrinkar, P. P.; Treiber, D. K. Activation state-dependent binding of small molecule kinase inhibitors: structural insights from biochemistry. Chem. Biol. 2010, 17, 1241−1249. (64) Pangborn, A. B.; Giardello, M. A.; Grubbs, R. H.; Rosen, R. K.; Timmers, F. J. Safe and convenient procedure for solvent purification. Organometallics 1996, 15, 1518−1520. (65) Still, W. C.; Kahn, M.; Mitra, A. Rapid Chromatographic Technique for Preparative Separations with Moderate Resolution. J. Org. Chem. 1978, 43, 2923−2925.

2009


Discovery of a Diaminopyrimidine FLT3 Inhibitor ... - ACS Publications

Recommend Documents