Argonne Program Provides Reliable, Stable Coal Samples for

Oct 3, 1988 - With completion of the collection phase of Argonne National Laboratory's premium coal sample program, extensive evaluation of the coal ...
0 downloads 0 Views 884KB Size
TECHNOLOGY

Argonne Program Provides Reliable, Stable Coal Samples for Research Applications include studies involving chemical analysis, heating values, coal structure, and combustion, gasification, and liquefaction problems With completion of the collection phase of Argonne National Laboratory's premium coal sample program, extensive evaluation of the coal samples is now under way. The set of eight distinct coal types has been collected and prepared for distribution. Samples of any or all of the eight types are available to qualified researchers. To date, 234 shipments of samples have been made to 110 foreign and domestic research groups, according to program director Karl S. Vorres. Acceptance of the samples has been excellent, he says, because the oxidation exhibited by the samples has been negligible. This permits sample stability heretofore not available and leads to a level of reliability in correlating data that would not otherwise be possible. Support for the program comes from the Office of Basic Energy Sciences of the U.S. Department of Energy. The Argonne program provides the basic coal research community with reliable, stable samples from a variety of coal types now available in the U.S. Long-term evaluation of sample characteristics is under way at several laboratories, because, in addition to the samples themselves, the premium sample program provides extended analytical data for users and inquirers. Commercial Testing & Engineering Co., an independent commercial laboratory, has finished work on chemical analyses. Additional studies beyond

these have been carried out by more than 40 laboratories to ensure objectivity in data collection. And still more studies are in progress, including macérai analyses being carried out at Southern Illinois University and at Argonne. Individual bulk samples have been collected over a period of about five years in cooperation with the U.S. Geological Survey and individual mine operators. In general, samples were collected from a freshly exposed seam face of a size sufficient to yield a ton of coal. Immediately upon exposure, the block was sealed in stainless steel drums at the coal face, or, in thin seams, it was transported to the surface in double plastic bags for transfer to the drums. In all cases, transfer to the drums was made within five hours following breakout of the sample. Once filled, the drums were purged with argon. The samples, in the drums, were transported immediately to Argonne in a semitrailer equipped with a refrigeration unit and argon purging equipment. During transport, the drums were maintained at 45 °F and pressurized to 6 psig with argon. Samples received at Argonne were immediately isolated within a

nitrogen-filled processing facility. All subsequent processing—grinding, sieving, blending, ampoule filling, and the like—took place within this facility. Distribution of the samples is made to researchers who describe the nature of their work and provide references to any documents in the public domain that may pertain to that work. The price of the samples is nominal and is intended only to help cover expenses incurred in gathering the samples. Prices range from $8.00 to $16 per ampoule depending on size and type of sample. Program management is advised by a panel of prominent coal researchers meeting annually. Of particular current interest is the broad range of research projects under way with the samples. Projects include analytical studies to identify precisely the character of the various coals, and work on direct measurement of organic sulfur by reflected radiation. Also under investigation is direct measurement of oxygen by fast neutron activation and subsequent measurement of oxygen activity. One research group is trying to establish relative amounts of the different

Program includes samples of eight U.S. coal types Seam

Upper Freeport Wyodak-Anderson Illinois No. 6 Pittsburgh No. 8 Pocahontas No. 3 Blind Canyon Lewiston-Stockton Beulah-Zap

State

Rank

C

Η

Ο

S

Ash

Pa. Wyo. III. Pa. Va. Utah W.Va. N.D.

MVB SUB HVB HVB LVB HVB HVB LIG

87% 74 77 83 91 79 81 73

5.5% 5.1 5.7 5.8 4.7 6.0 5.5 5.3

4% 19 10 8 3 13 11 21

2.8% 0.5 5.4 1.6 0.9 0.5 0.6 0.8

13% 8 16 9 5 5 20 6

MVB = medium-volatile bituminous, SUB — subbituminous, HVB = high-volatile bituminous, LVB = low-volatile bituminous, LIG = lignite; S and ash compositions are on a dry basis. Other components are moisture- and ash-free values.

October 3, 1988 C&EN

29

Put your PC to work with graphics from C_Graph.

SOFTWARE/DATABASE UPDATE • DDMIX—Mixture Property Program (National Institute of Standards & Technology, $400 li­ cense agreement Circle 301) is a database for calculating viscosi­ ty, density, and other thermody­ namic and transport properties of hydrocarbons and hydrocar­ bon fluid mixtures, including natural gas and petroleum. The database, in the form of a floppy disk for IBM PCs and compat­ ibles, provides rapid access to in­ formation relating to storage and transportation of fluids and de­ sign of new chemical processes.

ChemCad and ChemDraft ChemCad and ChemDraft are designed to create chemical struc­ tures easily. Both come with extensive structure libraries allowing you to build molecules from their constituent parts. Zoom, pan and rotation let you orient the structure to suit your needs. Both ChemCad and ChemDraft support mouse input and are menu driven. ChemCad brings molecular modeling to your PC and comes with MM2 and Μ Ν DO. "Convenient and powerful" is how ChemCad was described in JACS. $250 ($175 Academic) ChemDraft is designed to create outstanding chemical drawings and integrate them with text. Chem Draft's virtual display buffer lets you use the full resolution of your printer. $195 ChemCad + combines ChemCad and ChemDraft $395 ($325 academic) Write us or call for more information on these programs or our other programs including MM2+ and MNDO + for the Mac and our data base of over 2000 MINDO/3,MNDO and AM1 structures.

MN\2+Jf ΜΗ00+

TortteKL H\so awtalne

CGraph Software, Inc. RQ. Box 5641 • Austin, Texas 78763 • (512) 459-3562

30

CIRCLE 89 ON READER SERVICE CARD October 3, 1988 C&EN

• Cameo II, a program for Apple Macintosh computers (National Safety Council, $329, Circle 302), aids effective response to chem­ ical accidents. It includes re­ sponse information for over 2600 commonly transported chemicals, a system for mapping, an air dis­ persion model to evaluate release scenarios and evacuation options, and databases that can be used to organize response information. An earlier version of the program was developed by the National Oceanic & Atmospheric Admin­ istration with support from EPA. • Hazinf, a hazardous materials database (Chemical Information Systems, Circle 303), is now avail­ able on the Chemical Informa­ tion System (CIS) database ser­ vice. Based on "Hazardous Chem­ icals Information and Disposal Guide/7 a handbook developed by chemistry researchers at the University of Alberta, Hazinf con­ tains instructions on safe han­ dling and disposal of 220 sub­ stances or substance classes. It complements two other CIS data­ bases: OHM/TADS (from EPA, 1402 substances) and Chris (U.S. Coast Guard, 1016 substances). • Snap-Stream (HEM Data Corp., $840 for a package that includes a second program required for op­ eration, Circle 304) is IBM PCbased software that samples and stores up to 15 million data points to disk in one continu­ ous stream. Streaming eliminates

lost data points that normally oc­ cur when acquiring large amounts of data at high speeds because of the data transfer limitations of IBM PC, XT, and AT computers. The amount of data that SnapStream acquires is limited only by the disk space available. • ChemConnection DA (SoftShell International, $395, Circle 305) is a desk accessory for the Macintosh computer that permits off-line construction of chemi­ cal structure or substructure search queries for CAS Online. No knowledge of CAS structure generation commands is required. • Lab View Version 2.0 (Nation­ al Instruments, $1995, Circle 306) reflects major enhancements to previous versions of the program, including a graphical language compiler that increases execution speed. LabView is a graphicsbased system for data acquisi­ tion, data analysis, data presen­ tation, and instrument control that runs on Macintosh computers. • Chiras (Molecular Design, Cir­ cle 307) is an asymmetric syn­ thesis database for use with the company's REACCS (REaction ACCess System) software. The 1988 release of Chiras (U.S. list price $11,000) will include ap­ proximately 6000 reactions; about 6000 more reactions will be add­ ed in a 1989 release ($11,000 ad­ ditional). These two installments will cover the chemical literature from 1975 to 1987. Updates will be offered in future releases. • Ε-Lab (OMS Tech Inc., $2495, Circle 308) is an IBM PC-based program for chromatographic data acquisition and control of Η PLC gradients using low-pres­ sure solvent proportioning. The program allows upgrading of single-pump, isocratic HPLC or ion chromatography systems to full binary gradient capabilities. For information on these items or numbered ads, see Reader Service Card

FIRSrO-EMICAL· QUAUTYChBAICAL WHO WE ARE

WHAT WE DO

WHO WE SERVE

First Chemical · Quality Chemical: a full spectrum manufacturing and service organization encompassing:

First Chemical · Quality Chemical: newly integrated research and manufacturing expertise and service capabilities provide for the efficient development, manufacture and distribution of a wide range of specialty and commodity chemicals

First Chemical · Quality Chemical: committed to providing, through innovative technology, specialty and high value-added chemicals to the following industries:

• commodity chemicals • fine chemical intermediates • specialty and performance chemicals • custom manufacturing

• • • •

agricultural pharmaceutical electrical rubber and plastics

MANUFACTURING EXPERTISE: Chemical Reactions and Chemical Processes

FIRST CHEMICAL CORPORATION

P.O. Box 1249 Jackson, Mississippi 39215-1249 (601)949-0246 TWX: 810-966-2738

Acid chloride Acylation Addition Alcoholysis Alkylation Bromination Condensation Cyclization Darzens Decarboxylation Dehydration

Diazotization Distillation Esterification Formylation Friedel-Crafts Hydrolysis Nitration Oxidation Reduction Replacement Vilsmeyer

QUALITY CHEMICALS, INC. Tyrone Industrial Park Tyrone, Pennsylvania 16686 (814)684-4310 FAX: 814-684-2532

P.O. Box 1427

Pascagoula, Mississippi 39567 (601)762-0870 TWX: 510-990-3361 (800) 828-7940

CIRCLE 59 ON READER SERVICE CARD

October 3, 1988 C&EN

31

Technology macérais in coals and to work out means for their separation. Analytical studies also include use of photoacoustic Fourier-transform infrared analysis, and plasma excitation spectroscopy for determination of trace elements. Studies of the physical properties of the eight types of coal are largely confined to the heating values, which appear to vary not only with the coal source but also with more ephemeral influences such as aging. It may now be possible to define "aging" with more acceptable precision. The studies of widest interest are probably those devoted to determining the structure of the coal types in the Argonne program. A half dozen laboratories are currently engaged in this work, with others delving directly into the problems of coal conversion. At present, the conversions of most significance are combustion, gasification, and liquefaction.

32

October 3, 1988 C&EN

In reflecting on initial results of the premium sample program, Vorres expresses satisfaction with the sample reliability that has been achieved over the first five years. Sample reliability has always been a problem in coal research, particularly during the hectic period of the 1970s, when limited data on standard coals severely hampered the drive to quickly develop coal conversion processes for a national energy program. Though the urgency may have subsided, the need remains. Vorres also believes that eventual uses of coal may be quite different from those now generally expected. Gasification and liquefaction will certainly remain among the important future uses of coal, but there may well be coal products developed from modifications of the basic coal structure that are only now being considered. The idea seems to be that coal, even more than oil, is susceptible to structural modifications that could result in chemi-

cals, commodities, fuels, and other products in forms not now available. Though coal is an obvious source of organic materials and fuels, it will remain inadequately exploited until coal recovery and processing are better understood. Understanding the resource is fundamental, and the Argonne coal sampling program is providing a boost in that direction. Joseph Haggin

New solar cells mimic natural photosynthesis A new type of solar cell shows promise not only for generating electricity but also for producing chemicals. The device, being developed by H. Ti Tien and coworkers at Michigan State University, depends on a process reminiscent of natural photosynthesis. Tien, a professor of physiology