Addition/Correction Cite This: Ind. Eng. Chem. Res. 2018, 57, 9329−9330
pubs.acs.org/IECR
Correction to “Layered Double Hydroxide/Chitosan Nanocomposite Beads as Sorbents for Selenium Oxoanions” Man Li,†,∇ Andrew Dopilka,†,∇ Andrea N. Kraetz,‡ Hangkun Jing,† and Candace K. Chan*,† †
Materials Science and Engineering, ‡Chemical Engineering; School for Engineering of Matter, Transport and Energy; Nanosystems Engineering Research Center for Nanotechnology − Enabled Water Treatment, Arizona State University, Tempe, Arizona 85287, United States
Downloaded via 185.252.186.80 on July 31, 2018 at 04:10:28 (UTC). See https://pubs.acs.org/sharingguidelines for options on how to legitimately share published articles.
Ind. Eng. Chem. Res., 2018, 57 (14), pp 4978−4987 (DOI: 10.1021/acs.iecr.8b00466) Figure 6 of this paper should be updated to appear as follows:
Figure 6. Kinetics of selenite, Se(IV), and selenate, Se(VI), sorption on in situ LDH nanopowder (left) and IS-50 nanocomposite beads (right) using initial concentrations of 1 and 5 ppm. (A) qt: amount of selenium sorbed at a particular time (mg/g); data were fit to a pseudo-second-order model (fitting shown as solid lines). (B) Percentage of initial selenium concentration that was removed. For the in situ LDH, the sorbent dose was 1 g/L; for the IS-50 beads, the dosage was 2 g/L (total mass of sorbent) or 0.73 g/L (considering only the mass of LDH). Each point represents an average of duplicates, with error bars showing the range.
■
AUTHOR INFORMATION
Corresponding Author
*Tel.: (480) 727-8614. E-mail:
[email protected]. © 2018 American Chemical Society
Published: July 5, 2018 9329
DOI: 10.1021/acs.iecr.8b02686 Ind. Eng. Chem. Res. 2018, 57, 9329−9330
Industrial & Engineering Chemistry Research
Addition/Correction
ORCID
Candace K. Chan: 0000-0003-4329-4865 Author Contributions ∇
These authors contributed equally to this work.
9330
DOI: 10.1021/acs.iecr.8b02686 Ind. Eng. Chem. Res. 2018, 57, 9329−9330
