Eco-Friendly Solid-State Upconversion Hydrogel with

Aug 24, 2017 - By loading microemulsion containing both sensitizer and emitter into the treated eco-friendly hydrogel, a new solid-state material of ...
0 downloads 0 Views 3MB Size
Download PDF
Article pubs.acs.org/JPCC

Eco-Friendly Solid-State Upconversion Hydrogel with Thermoresponsive Feature as the Temperature Indicator Changqing Ye, Jinsuo Ma, Shuoran Chen, Jie Ge, Wenting Yang, Qi Zheng, Xiaomei Wang,* Zuoqin Liang, and Yuyang Zhou Research Center for Green Printing Nanophotonic Materials, Institute of Chemistry, Biology and Materials Engineering, Suzhou University of Science and Technology, Suzhou 215009, China S Supporting Information *

ABSTRACT: By loading microemulsion containing both sensitizer and emitter into the treated eco-friendly hydrogel, a new solid-state material of triplet−triplet annihilation based upconversion (TTA-UC) material was first reported. This UC hydrogel has shown an excellent stable emission of the green-to-blue luminescence, owing to the honeycomb-like nanoporous structure of the hydrogel. Moreover, this emission of UC hydrogel was strongly dependent on the temperature. The UC fluorescence intensity is close to the linear growth from 30 to 60 °C. This thermoresponsive upconversion hydrogel, which could be easily molded into various shapes, has provided a new perspective in manufacturing a novel temperature indicator and as well other applications in stabilizing air-sensitive species in aerated systems.

■

INTRODUCTION Upconversion (UC), an antistokes emission process which converts low-energy photons into high-energy photons, has attracted great attention for its potential applications in photocatalysis,1−6 photovoltaics,7 organic electroluminescence,8,9 biological imaging,10 and photodynamic therapy.11 Conventional UC techniques based upon two-photon absorption12 and second-harmonic generation13 suffer from some fundamental drawbacks,14 such as requirement of considerably high excitation intensities (MW·cm−2) and low UC quantum yield. Triplet−triplet annihilation based upconversion (TTA-UC) has been widely researched owing to its low excitation power density, readily tunable excitation emission wavelength, strong absorption ability, and high UC quantum yield.15,16 The TTAUC system mainly consists of a triplet sensitizer and acceptor. Upon excitation, the triplet sensitizer will achieve its singlet state, followed by an intersystem crossing process to reach the triplet state. Then the energy will be transferred to the acceptor via triplet−triplet energy transfer (TTET). Two triplet state acceptors will annihilate by collision and populate the singlet excited state. This acceptor at the singlet excited state could go back to the ground state with UC fluorescence.17,18 As we know, the triplet excited state of sensitizer and acceptor can be easily quenched by oxygen, resulting in a fairly low UC efficiency or even none. To avoid triplet state quenching, TTA-UC has been studied mostly in deoxygenated organic solvents.19−24 As a consequence, TTA-UC shows certain restrictions for practical application in the ambient aqueous phase. For this reason, efficient TTA-UC in the ambient, oxygen-rich environment has aroused great attention © 2017 American Chemical Society

and been explored by many researchers. For example, sensitizers and acceptors were embedded into rubbery polymer films with low glass transition temperatures, such as EO-EPI or the polyurethanes.25−27 Besides, some rigid polymer film and porous silica particles have been applied as TTA-UC mediums as well.28,29 Moreover, efficient TTA-UC emission under airsaturated condition was achieved in some supramolecular organogel nanofibers with the adaptive and cooperative accumulation of different donor−acceptor upconversion pairs,30 and core−shell microspheres, in which sensitizers and acceptors were encapsulated, could also produce upconversion luminescence in oxygen-rich environment.31−33 Upconversion efficiency in these mediums was actually lower than that in organic solvents. Therefore, a general strategy of a preparing high-efficiency TTA-UC system in ambient air is necessary. For example, Duan et al. have developed a solventfree liquid photon UC system, by introducing branched alkyl chains to both the donor and acceptor molecules, which ensured their good miscibility and insusceptibility of upconversion luminescence to oxygen.30 Sripathyan et al. have reported a gelated photochemical upconversion material comprised of a quasi-solid organogel of DMDBS, which has an upconversion efficiency of 0.22.34 We have transformed an oilin-water (O/W) microemulsion containing a bimolecular UC system doped with palladium(II) tetraphenylporphyrin and 9,10-dinaphthylanthracene (i.e., upconverted O/W microemulsion) into a treated eco-friendly sodium polyacrylate Received: July 3, 2017 Revised: August 21, 2017 Published: August 24, 2017 20158

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164

Article

The Journal of Physical Chemistry C (PAAS) hydrogel with honeycomb-like structure. PAAS is a kind of superabsorbent intelligent polymer material, which is promising for practical applications such as environmental protection,35 hygienic products,36 and others. PAAS could be swelled to hydrogel in water and could be reusable after filtration because of its insolubility in either water or conventional organic solvents. Here we demonstrated that the O/W UC microemulsion could be easily absorbed in this treated honeycomb-like PAAS owing to the efficient interconnected network structure among the pores in this treated PAAS and then turned into a solid-state UC hydrogel. This UC hydrogel could be easily molded into various shapes, such as a cuboid or ball, which is promising in manufacturing various kinds of complicated optical components. Moreover, it was found that this emission of UC hydrogel strongly depended on its temperature. All these features have shown a great potential application in novel optical temperature indicators as well.

Water absorbent rate (μ) is the volume of absorbed water per unit time at unit mass of the resin. The prepared dry resins were put into deionized water and soaked until fully swelled. It was calculated with the following equation, where ΔV represents the volume of water absorbed by the resin; m is the mass of the resin; and t is the time.

μ=

ΔV mt

(1)

In order to obtain the morphologies of hydrogels, the swelled PAAS hydrogel was prefrozen in the liquid nitrogen and then was freeze-dried into a test sample for the micromorphology characterization. A field-emission scanning electron microscope (FEI Quanta 250) was used, after sputtering the samples with a thin layer of gold. Preparation and Measurement of UC Hydrogel. The porous PAAS was put into the prepared O/W UC microemulsion and soaked for about 48 h. The microemulsion was well absorbed, and the porous PAAS was fully swelled to UC hydrogel. The hydrogel was kept in the atmospheric environment before further characterization and measurements. The UV−visible absorption spectra were recorded on a Hitachi U-3500 recording spectrophotometer. Steady-state fluorescence and experiments were measured on an Edinburgh FLS 920 fluorophotometer equipped with a time-correlated single-photon counting (TCSPC) card. The excitation source for the upconversion was a diode-pumped solid-state continuous laser (532 nm). The power of the laser was measured with a photodiode detector, and the diameter of the 532 nm laser spot was approximately 3 mm. For the upconversion experiments, the samples were tested immediately in air atmosphere. The upconverted fluorescence was observed with an UV−vis spectrometer (PG2000 Pro, Ideaoptics Technology Ltd., China). A 532 nm optical filter was used to get rid of the scattered laser peak. The upconversion emission photographs were taken by a Sony digital camera. TTA-UC efficiency (ΦUC) can be calculated by eq 2, where subscripts “s” and “r” represent sample and reference (Rhodamine B in EtOH was used as standard, ΦF = 65%), respectively. Φr is the fluorescence quantum yield of reference; A is the absorbance; F is the integrated fluorescence intensity; and η is the refractive index of solvents. The equation is multiplied by a factor of 2, accounting for the fact that two absorbed photons are required to produce one upconverted photon.

■

EXPERIMENTAL SECTION Materials. All reagents and solvents were used as received without further purification. 9,10-Diphenylanthracene (DPA) was purchased from Aldrich. Palladium(II) tetraphenylporphyrin (PdTPP) was synthesized as previously reported. Acrylic acid, potassium persulfate, N,N-methylene bis(acrylamide), and Tween-20 were purchased from Aldrich or Acros Chemical Co. Toluene, benzonitrile, ethanol, and chloroform were analytical reagents. Deionized water was used in the experiments throughout. Preparation of UC O/W Microemulsion. Mixed solutions of PdTPP (0.12 mM) and DPA (36 mM) in toluene were prepared prior to use. An amount of 19 mL of deionized water was added into a flask, and then the flask was vacuumed and backfilled with nitrogen several times and degassed for 45 min. After that, 9 mL of Tween-20 was inserted into the flask via syringe, followed by 2 mL of PdTPP/DPA UC solution. The mixed solution was stirred under nitrogen atmosphere to form a homogeneous microemulsion. Finally, a pink microemulsion was obtained and sealed for further experiment. Preparation and Measurement of Porous PAAS. PAAS (sodium polyacrylate) absorbent was synthesized with the PIT (phase inversion temperature) method. Sodium hydroxide (2.32 g) was completely dissolved in 30 mL of deionized water. Acrylic acid (5 mL) was added slowly with an ice−water bath. Then potassium peroxydisulfate (KPS, 0.015 g) was added as the initiator, followed by a cross-linking agent N,N′-methylenebis(acrylamide) (BIS, 0.0013 g). The mixture was magnetically stirred at 70 °C and kept reacting for 3 h. After the polymerization was finished, a raw PAAS was obtained as a transparent elastic solid. Specific alcohol leaching treatment to form the honeycomblike porous structure was as follows: raw PAAS absorbent resin (1 g) was put into 500 mL of deionized water and soaked until the resin fully swelled to hydrogel. Then absolute ethanol was poured in quantity and stirred rapidly. After standing for 20 min, the hydrogel began to dehydrate, and some white flocculus appeared on the surface. The water was poured out, and large amounts of absolute ethanol were added again. This process was repeated a couple of times until the hydrogel was entirely turned into white solid by draining away almost all the water from it. The porous PAAS was dried and kept sealed before further experiments and measurements.

■

2 ⎛ A ⎞⎛ F ⎞⎛ η ⎞ ΦUC = 2Φr ⎜ r ⎟⎜ s ⎟⎜⎜ s ⎟⎟ ⎝ A s ⎠⎝ Fr ⎠⎝ ηr ⎠

(2)

RESULTS AND DISCUSSION PdTPP was chosen as the sensitizer which showed a Soret absorption band at 412 nm and Q-band at 521 nm. Upon irradiation of the Q-band, PdTPP emitted phosphoresces around 689 nm under nitrogen atmosphere (Figure 1a). Since the triplet excited state energy matched with PdTPP, DPA was appropriate to be the emitter for the TTA-UC system. In toluene, DPA gave a maximal absorption at 374 nm, which showed no absorption at 532 nm. The intense blue fluorescence was observed when DPA was excited (Figure 1b). First, mixed solutions of PdTPP (0.12 mM) and DPA (36 mM) were prepared. The UC microemulsion liquid was 20159

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164

Article

The Journal of Physical Chemistry C

polymerization showed high swelling ability in the presence of hydrophilic groups. Water absorbency of the PAAS is about 450 mL/g, which showed an excellent absorption performance. Figure 2b presented a transparent hydrogel fully absorbed with water. However, the raw PAAS hydrogel can hardly swell in the viscous microemulsion, unlike in purified water. Therefore, the key point of the further treatment of the raw PAAS to make it easier to absorb the microemulsion was essential. The microstructures of the PAAS before and after the treatment were compared under scanning electron microscopy. SEM images in Figure 2d,e showed a flow fold surface of the raw PAAS with some large and small pits scattered on it. However, there was no inner porous structure in the nano or microscale. As a contrast, after the alcohol leaching process, the raw PAAS hydrogel has a three-dimensional cross-linked, porous, honeycomb-like structure (Figure 2f,g). It is noteworthy that water could be removed from hydrogel effectively to form an inner porous structure of hydrogel, when one solvent that could both be miscible with water and not destroy any structure of the hydrogel was added in the hydrogel. This porous, honeycomb-like structure was resulting from the washing process by ethanol which could remove the low molecular weight polymers. The treated PAAS with porous, honeycomb-like structure showed excellent absorption performance. The water absorbent rate (125 mL/h) is almost two times larger than the raw PAAS hydrogel (75 mL/h). Meanwhile, the treated hydrogel can absorb the microemulsion at the absorbent rate of about 11 mL/h, while the raw PAAS can barely absorb the microemulsion. Since the hydrogel’s swelling and shrinking capacity are mainly dependent on the capillary force, the diffusion rate of microemulsion in hydrogel developed significantly larger than in the polymer network. What’s more, the honeycomb-like interconnection among the pores could form a reticular network and shorter diffusion paths, which could facilitate the absorption of the viscous microemulsion. Hereby, we successfully modify a conventional PAAS into a honeycomb-like nanoporous, superabsorbent polymer by a very simple way. This honeycomb-like PAAS has proved to be an excellent candidate material as the solid carrier in TTA-UC, which can efficiently swell the O/W UC microemulsion and transform into a solid-state UC hydrogel (Figure 2c). Moreover, the hydrogel could be easily molded into various shapes, such as a ball (Figure 3). With the diode pumped solidstate laser (λex = 532 nm, 50 mW/cm2) as the excitation light source, the sensitizer (PdTPP) was excited and achieved at its triplet excited state because of the heavy-atom effect of palladium (Pd), and then the triplet excited state of acceptor

Figure 1. Normalized excitation and emission spectra of (a) PdTPP and (b) DPA in toluene.

obtained with toluene as the oil phase dispersed in water (Figure 2a). Then the PAAS hydrogel prepared by solution

Figure 2. (a) Digital photo of O/W UC microemulsion; (b) digital photo of transparent untreated hydrogel fully absorbed with water; (c) digital photo of solid-state UC hydrogel; (d,e) SEM images showing the untreated raw PAAS hydrogel with a flow fold surface, on which some large and small pits scattered; (f,g) SEM images showing the treated PAAS with porous, honeycomb-like structure. Scale bar: (d,f) 50 μm; (e,g) 40 μm.

Figure 3. (a) UC hydrogel could be easily molded into various shapes like balls. (b) With the diode pumped solid-state laser (λex = 532 nm, 50 mW/cm2) as excitation light source, the green to blue upconverted emission at around 440 nm was successfully observed in air atmosphere through a notch filter at 532 nm, 60 °C. 20160

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164

Article

The Journal of Physical Chemistry C (DPA) was populated via TTET. Finally the upconverted fluorescence of DPA could be produced via TTA. Therefore, the green-to-blue upconverted emission around 440 nm was successfully observed in air atmosphere through a 532 nm filter (Figure 3b). It can also be observed that the UC microemulsion was swelled and distributed homogeneously in this honeycomblike PAAS. The upconverted emission was uniform, when the laser was irradiated at different parts of the hydrogel (Figure S2). Amazingly, we further found that this emission of UC hydrogel strongly depended on its temperature. The luminescence spectra of the UC hydrogel at various temperatures from 30 to 60 °C were carefully studied in Figure 4a. It

Figure 5. (a) Upconversion intensity of the UC hydrogel in the heating−cooling cycles (λex = 532 nm; the integrated UC intensity represented the total energy of the spectra peak from 400 to 525 nm). (b) Digital photo of the emission of UC hydrogel at 30 °C (orange red) and 60 °C (blue). (c) The temperature-dependent upconversion efficiency of the UC hydrogel in air (532 nm, 50 mW/cm2).

Figure 4. (a) Spectra of UC hydrogel at different temperatures from 30 to 60 °C in air atmosphere. The excitation source was a diode laser at 532 nm and 50 mW/cm2. (b) The integrated area of the spectra peak represented the total energy of the UC emission (400−525 nm), and the phosphorescence (650−850 nm) was compared at different temperatures.

temperature rose, the red phosphorescence faded, and the blue upconversion fluorescence showed again, which showed a promising application as the temperature indicator. The luminance hue changes of the hydrogel between blue and red could be observed by the naked eye during the cooling process (Figure 5b). Besides, the upconversion efficiency of the hydrogel was also dependent on the temperature. The upconversion efficiency could rise to 5.6% at 60 °C (Figure 5c). This upconversion emission was surprisingly stable. The upconversion efficiency could remain almost unchanged under exposure to air for more than 25 days (Figure S3). It is to note that such stable upconversion efficiency is not observable for the PdTPP/DPA pair in aerated DMF solution, in the absence of the PAAS hydrogel. These observations indicate that the quenching effect by dissolved molecular oxygen is effectively prevented by the PAAS hydrogel.

was shown that the UC emission peak raised as temperature increased, while the phosphorescence peak of the sensitizer was descending. For further study of the relationship between the emission intensity and temperature, the integrated emission intensities of the UC fluorescence band (400−525 nm) and phosphorescence band (650−850 nm) were plotted as a function of temperature (Figure 4b). The UC fluorescence intensity is close to the linear growth from 30 to 60 °C, which was also in accordance with the fitting equation (IUC = 0.3478T − 9.111). This thermoresponsive UC emission can be repeated reversibly between 30 and 60 °C for many cycles, suggesting the reversibility of the UC hydrogel (Figure 5a). As the 20161

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164

Article

The Journal of Physical Chemistry C This interesting thermoresponsiveness feature of the UC hydrogel is due to the character of the O/W UC microemulsion. The nonionic surfactant used as the emulsifier in the O/W microemulsion could be reversibly converted into a W/O (water-in-oil) microemulsion. At first, the nanoscale droplets of oil containing PdTPP/DPA pair could be dispersed in a waterrich continuous phase at room temperature. Since the upconversion is diffusion controlled, the molecular collision was limited in the aqueous phase which led to inefficiency triplet energy transfer. Consequently, strong Stokes emission from 3PdTPP phosphorescence at 650−850 nm was observed, and the upconversion emission was not much higher at 30 °C. As the temperature increased, the microemulsion converted into the state of the nanoscale droplets of water dispersing in an oil-rich continuous phase, in which the soluble upconversion pairs (PdTPP/DPA) could freely collide with each other. Then the TTET process became efficient, and strong anti-Stokes emission from 1DPA at 400−525 nm could also be obtained at low power density (50 mW/cm2). However, this increase also had a limit. When the temperature increased over 60 °C, the swelled hydrogel may be dehydrated slowly to a white solid, and the transmittance of hydrogel reduced. Therefore, the emission intensity was sharply reduced when the temperature exceeded 60 °C. To prove the TTA-UC mechanism, dependence on the power density of incident light was investigated. Figure 6a shows steady-state luminescence spectra of the UC hydrogel obtained at varied incident laser power. With increasing incident excitation power from 12.31 to 64.84 mW/cm2, a rapid enhancement of the upconversion fluorescence could be observed. TTA-UC threshold excitation intensity Ith is another important parameter characterizing the TTA-UC processes.30 In general, TTA-UC shows a quadratic incident light power dependence of emission intensity in the weak-annihilation limit, which consequently turns into first-order dependence in the saturated annihilation regime.37,38 The Ith value is experimentally determined as the intersection point of these two lines. Figure 6b presents a double logarithm plot for the upconverted emission intensity of the hydrogel as a function of incident light power density (λex = 532 nm). The dashed lines in Figure 6b were the fitting results at different power density regimes. At the lower-power regime under Ith, a slope of 2.02 was observed, whereas it changed to 1.19 (near to 1) at higher power density. It provided decisive experimental evidence for TTA-based photon UC in this hydrogel system. It is noteworthy that the crossover threshold was observed at a relatively low power density around 23.98 mW/cm2, which is comparably lower than those reported for the solvent-free polymer systems.30,39,40

Figure 6. (a) Steady-state luminescence spectra of the UC hydrogel obtained at varied incident laser power (from 12.31 to 64.84 mW/ cm2), 60 °C. A notch filter at 532 nm was used to remove the scattered incident light. (b) A double logarithm plot for the UC emission intensity of the hydrogel as a function of incident light power density (λex = 532 nm). The dashed lines were the fitting results at different power density regimes. The dependence of upconversion intensity on laser power density switching from quadratic to linear provided further decisive experimental evidence for strong TTA-based upconversion of this hydrogel system.

accordance with the decreased phosphorescence intensity. Therefore, this temperature-sensitive hydrogel has great potential in manufacturing some novel temperature-indicator applications. We believe that this new strategy for TTA-UC materials will greatly facilitate the promising applications of upconversion materials in some practical optical devices. Moreover, it also provides a new perspective in environmentally friendly hydrogel research because it offers not only a useful and versatile methodology to develop photon-upconverting soft materials but also a surprising potential of blocking molecular oxygen.

■

CONCLUSIONS In summary, a new solid-state material of triplet−triplet annihilation-based upconversion was developed by loading both sensitizer and emitter into the PAAS hydrogel with threedimensional porous honeycomb-like structure. This ecofriendly soft hydrogel has endowed this solid-state UC material an excellent forming property, which could be easily molded into various shapes. This UC hydrogel containing PdTPP/DPA microemulsion can populate the green-to-blue upconversion luminescence in the atmospheric environment, which has shown a good upconversion luminescence stability. Moreover, this emission of UC hydrogel strongly depended on the temperature. The upconversion fluorescence intensity is close to the linear growth from 30 to 60 °C, which was also in

■

ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.jpcc.7b06504. The molecular structures, photos of the upconversion hydrogel, time-dependent upconversion efficiency, and 20162

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164

Article

The Journal of Physical Chemistry C

■

(arylacetylide) Complexes That Show Long-Lived Triplet Excited States. Eur. J. Inorg. Chem. 2012, 2012, 3183−3190. (12) Idris, N. M.; Jayakumar, M. K. G.; Bansal, A.; Zhang, Y. Upconversion Nanoparticles as Versatile Light Nanotransducers for Photoactivation Applications. Chem. Soc. Rev. 2015, 44, 1449−1478. (13) Liu, G. Advances in the Theoretical Understanding of Photon Upconversion in Rare-Earth Activated Nanophosphors. Chem. Soc. Rev. 2015, 44, 1635−1652. (14) Zhao, J.; Wu, W.; Sun, J.; Guo, S. Triplet Photosensitizers: from Molecular Design to Applications. Chem. Soc. Rev. 2013, 42, 5323− 5351. (15) Ye, C.; Zhou, L.; Wang, X.; Liang, Z. Photon Upconversion: from Two-Photon Absorption (TPA) to Triplet-Triplet Annihilation (TTA). Phys. Chem. Chem. Phys. 2016, 18, 10818−10835. (16) Zhao, J.; Ji, S.; Guo, H. Triplet-Triplet Annihilation Based Upconversion: from Triplet Sensitizers and Triplet Acceptors to Upconversion Quantum Yields. RSC Adv. 2011, 1, 937−950. (17) Wang, B.; Sun, B.; Wang, X.; Ye, C.; Ding, P.; Liang, Z.; Chen, Z.; Tao, X.; Wu, L. Efficient Triplet Sensitizers of Palladium(II) Tetraphenylporphyrins for Upconversion-Powered Photoelectrochemistry. J. Phys. Chem. C 2014, 118, 1417−1425. (18) Singh-Rachford, T. N.; Castellano, F. N. Photon Upconversion Based on Sensitized Triplet-Triplet Annihilation. Coord. Chem. Rev. 2010, 254, 2560−2573. (19) Ji, S.; Wu, W.; Wu, W.; Guo, H.; Zhao, J. Ruthenium(II) Polyimine Complexes with a Long-Lived 3IL Excited State or a 3 MLCT/3IL Equilibrium: Efficient Triplet Sensitizers for Low-Power Upconversion. Angew. Chem. 2011, 50, 1664−1667. (20) Monguzzi, A.; Borisov, S.; Pedrini, J.; Klimant, I.; Salvalaggio, M.; Biagini, P.; Melchiorre, F.; Lelii, C. L.; Meinardi, F. Efficient Broadband Triplet−Triplet Annihilation-Assisted Photon Upconversion at Subsolar Irradiance in Fully Organic Systems. Adv. Funct. Mater. 2015, 25, 5617. (21) Islangulov, R. R.; Kozlov, D. V.; Castellano, F. N. Low Power Upconversion Using MLCT Sensitizers. Chem. Commun. 2005, 2005, 3776−3778. (22) Singh-Rachford, T. N.; Islangulov, R. R.; Castellano, F. N. Photochemical Upconversion Approach to Broad-Band Visible Light Generation. J. Phys. Chem. A 2008, 112, 3906−3910. (23) Duan, P.; Yanai, N.; Kurashige, Y.; Kimizuka, N. AggregationInduced Photon Upconversion through Control of the Triplet Energy Landscapes of the Solution and Solid States †. Angew. Chem., Int. Ed. 2015, 54, 7544−7549. (24) Ye, C.; Wang, J.; Wang, X.; Ding, P.; Liang, Z.; Tao, X. A New Medium for Triplet-Triplet Annihilated Upconversion and Photocatalytic Application. Phys. Chem. Chem. Phys. 2016, 18, 3430−3437. (25) Singh-Rachford, T. N.; Lott, J.; Weder, C.; Castellano, F. N. Influence of Temperature on Low-Power Upconversion in Rubbery Polymer Blends. J. Am. Chem. Soc. 2009, 131, 12007−12014. (26) Baluschev, S.; Keivanidis, P. E.; Wegner, G.; Jacob, J.; Grimsdale, A. C.; Mullen, K.; Miteva, T.; Yasuda, A.; Nelles, G. Upconversion Photoluminescence in Poly(Ladder-Type-Pentaphenylene) Doped with Metal (II)-Octaethyl Porphyrins. Appl. Phys. Lett. 2005, 86, 061904−061904−3. (27) Merkel, P. B.; Dinnocenzo, J. P. Low-Power Green-to-Blue and Blue-to-UV Upconversion in Rigid Polymer Films. J. Lumin. 2009, 129, 303−306. (28) Liu, Q.; Yin, B.; Yang, T.; Yang, Y.; Shen, Z.; Yao, P.; Li, F. A General Strategy for Biocompatible, High-Effective Upconversion Nanocapsules Based on Triplet-Triplet Annihilation. J. Am. Chem. Soc. 2013, 135, 5029−5037. (29) Katta, K.; Busko, D.; Avlasevich, Y.; Baluschev, S.; Landfester, K. Synthesis of Triplet-Triplet Annihilation Upconversion Nanocapsules under Protective Conditions. Macromol. Rapid Commun. 2015, 36, 1084−1088. (30) Duan, P.; Yanai, N.; Kimizuka, N. Photon Upconverting Liquids: Matrix-Free Molecular Upconversion Systems Functioning in Air. J. Am. Chem. Soc. 2013, 135, 19056−19059.

the stress−strain curve of the upconversion hydrogel (PDF)

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected]. ORCID

Xiaomei Wang: 0000-0002-5336-9608 Notes

The authors declare no competing financial interest.

■

ACKNOWLEDGMENTS The author would like to acknowledge Prof. Weibang Lv and Prof. Xiaohua Zhang from the Center for Nanocomposite Materials, Suzhou Institute of Nano-tech and Nano-bionics, CAS for their kindly help in the mechanical measurement. The authors are grateful to National Natural Science Foundation of China (Grant No. 51673143, 51603141, 51303122), Natural Science Foundation of Jiangsu Province-Excellent Youth Foundation (BK20170065), Natural Science Foundation of Jiangsu Province (BK20160358, BK20150285), Natural Science Foundation of the Higher Education Institutions of Jiangsu Province (17KJA430016), Qing Lan Project, Excellent Innovation Team in Science and Technology of Education Department of Jiangsu Province, the Priority Academic Program Development of Education Department of Jiangsu Province (PAPD) for the financial supports.

■

REFERENCES

(1) Maity, S.; Zhu, M.; Shinabery, R. S.; Zheng, N. Intermolecular [3 + 2] Cycloaddition of Cyclopropylamines with Olefins by VisibleLight Photocatalysis. Angew. Chem., Int. Ed. 2012, 51, 222−226. (2) Liu, J.; Wang, H.; Antonietti, M. Graphitic Carbon Nitride ″Reloaded″: Emerging Applications Beyond (Photo)Catalysis. Chem. Soc. Rev. 2016, 45, 2308−2326. (3) Chen, Y.; Zhao, J.; Xie, L.; Guo, H.; Li, Q. Thienyl-Substituted BODIPYs with Strong Visible Light-Absorption and Long-Lived Triplet Excited States as Organic Triplet Sensitizers for Triplet-Triplet Annihilation Upconversion. RSC Adv. 2012, 2, 3942−3953. (4) Liu, J.; Antonietti, M. Bio-Inspired NADH Regeneration by Carbon Nitride Photocatalysis Using Diatom Templates. Energy Environ. Sci. 2013, 6, 1486−1493. (5) Neumann, M.; Füldner, S.; König, B.; Zeitler, K. Metal-Free, Cooperative Asymmetric Organophotoredox Catalysis with Visible Light. Angew. Chem., Int. Ed. 2011, 50, 951−954. (6) Zou, Y.-Q.; Lu, L.-Q.; Fu, L.; Chang, N.-J.; Rong, J.; Chen, J.-R.; Xiao, W.-J. Visible-Light-Induced Oxidation/[3 + 2] Cycloaddition/ Oxidative Aromatization Sequence: A Photocatalytic Strategy to Construct Pyrrolo[2,1-a]isoquinolines. Angew. Chem., Int. Ed. 2011, 50, 7171−7175. (7) Goldschmidt, J. C.; Fischer, S. Upconversion for Photovoltaics − A Review of Materials, Devices and Concepts for Performance Enhancement. Adv. Opt. Mater. 2015, 3, 510−535. (8) Laquai, F.; Park, Y.-S.; Kim, J.-J.; Basché, T. Excitation Energy Transfer in Organic Materials: from Fundamentals to Optoelectronic Devices. Macromol. Rapid Commun. 2009, 30, 1203−1231. (9) Gu, Z.; Yan, L.; Tian, G.; Li, S.; Chai, Z.; Zhao, Y. Recent Advances in Design and Fabrication of Upconversion Nanoparticles and Their Safe Theranostic Applications. Adv. Mater. 2013, 25, 3758− 3779. (10) Liu, Q.; Yang, T.; Feng, W.; Li, F. Blue-Emissive Upconversion Nanoparticles for Low-Power-Excited Bioimaging in Vivo. J. Am. Chem. Soc. 2012, 134, 5390−5397. (11) Ji, S.; Wu, W.; Zhao, J.; Guo, H.; Wu, W. Efficient Triplet− Triplet Annihilation Upconversion with Platinum(II) Bis20163

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164

Article

The Journal of Physical Chemistry C (31) Kim, J. H.; Kim, J. H. Encapsulated Triplet−Triplet Annihilation-Based Upconversion in the Aqueous Phase for SubBand-Gap Semiconductor Photocatalysis. J. Am. Chem. Soc. 2012, 134, 17478−17481. (32) Kang, J. H.; Reichmanis, E. Low-Threshold Photon Upconversion Capsules Obtained by Photoinduced Interfacial Polymerization. Angew. Chem., Int. Ed. 2012, 51, 11841−11844. (33) Zhang, C.; Zheng, J. Y.; Zhao, Y. S.; Yao, J. N. Organic CoreShell Nanostructures: Microemulsion Synthesis and Upconverted Emission. Chem. Commun. 2010, 46, 4959−4961. (34) Sripathy, K.; MacQueen, R. W.; Peterson, J. R.; Cheng, Y. Y.; Dvorak, M.; McCamey, D. R.; Treat, N. D.; Stingelin, N.; Schmidt, T. W. Highly Efficient Photochemical Upconversion in a Quasi-Solid Organogel. J. Mater. Chem. C 2015, 3, 616−622. (35) Gücļ ü, G.; Al, E.; Emik, S.; Iẏ im, T. B.; Ö zgümüs,̧ S.; Ö zyürek, M. Removal of Cu2+ and Pb2+ Ions from Aqueous Solutions by StarchGraft-Acrylic Acid/Montmorillonite Superabsorbent Nanocomposite Hydrogels. Polym. Bull. 2010, 65, 333−346. (36) Zhang, J.; Xiao, H.; Li, N.; Ping, Q.; Zhang, Y. Synthesis and Characterization of Super-Absorbent Hydrogels Based on Hemicellulose. J. Appl. Polym. Sci. 2015, 132, 138−144. (37) Monguzzi, A.; Mezyk, J.; Scotognella, F.; Tubino, R.; Meinardi, F. Upconversion-Induced Delayed Fluorescence in Multicomponent Organic Systems: Role of Dexter Energy Transfer. Phys. Rev. B: Condens. Matter Mater. Phys. 2008, 77, 155122. (38) Haefele, A.; Blumhoff, J.; Khnayzer, R. S.; Castellano, F. N. Getting to the (Square) Root of the Problem: How to Make Noncoherent Pumped Upconversion Linear. J. Phys. Chem. Lett. 2012, 3, 299−303. (39) Monguzzi, A.; Bianchi, F.; Bianchi, A.; Mauri, M.; Simonutti, R.; Ruffo, R.; Tubino, R.; Meinardi, F. High Efficiency Up-Converting Single Phase Elastomers for Photon Managing Applications. Adv. Energy Mater. 2013, 3, 680−686. (40) Monguzzi, A.; Frigoli, M.; Larpent, C.; Tubino, R.; Meinardi, F. Low-Power-Photon Up-Conversion in Dual-Dye-Loaded Polymer Nanoparticles. Adv. Funct. Mater. 2012, 22, 139−143.

20164

DOI: 10.1021/acs.jpcc.7b06504 J. Phys. Chem. C 2017, 121, 20158−20164