Subscriber access provided by University of Glasgow Library
Article
First-Principles Study on Migration and Coalescence of Point Defects in Mono-layer Graphene Liang Wu, Tingjun Hou, Youyong Li, Kwok Sum Chan, and Shuit-Tong Lee J. Phys. Chem. C, Just Accepted Manuscript • DOI: 10.1021/jp405130c • Publication Date (Web): 22 Jul 2013 Downloaded from http://pubs.acs.org on July 24, 2013
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
The Journal of Physical Chemistry C is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11
First-Principles Study on Migration and Coalescence of Point Defects in Mono-layer Graphene 1 Liang Wu , Tingjun Hou1, Youyong Li1*, K. S. Chan2*, Shuit-Tong Lee1 1. Institute of Functional Nano & Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials & Devices, Soochow University, Suzhou, Jiangsu 215123, China 2. Center for Functional Photonics, Department of Physics and Materials Science, City University of Hong Kong, Hong Kong. Email:
[email protected],
[email protected] 12
Graphene is a promising material due to its outstanding properties. Point defects
13
can be created artificially and tailor / improve the relative properties of pristine
14
graphene. Defective graphene is potential material for electronic devices and sensors.
15
Under irradiation or heat treatment, defects may diffuse and aggregate together. Here
16
we perform density functional theory (DFT) to illustrate the migration and
17
coalescence processes of the point defects. We find that the presence of
18
single-vacancy (SV) defect stimulates the migration of another SV defect to bring
19
them together and form the adjacent single vacancy defects. The adjacent single
20
vacancy defects can combine into a divacancy defect and we study the path. We also
21
study the structural rearrangement of divacancy defect and conclude the relative
22
stability of different types of divacancy defects. In addition, we find that divacancy
23
defect [V2 (5-8-5) defect] is ready to be healed by a neighboring adatom defect. In
24
comparison, divacancy defect [V2 (555-777) defect] cannot be healed by an adatom
25
defect directly. Our results provide the mechanism of migration and coalescence
26
processes of point defects in graphene, which is useful for nano-engineering of
27
graphene with defect.
28
Abstract
Keywords: DFT; graphene, defect, vacancy, transition state.
29 30
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
31 32
Page 2 of 20
1. Introduction
33
Graphene, one of the carbon allotropes, has attracted extensive attentions when
34
isolated by mechanical exfoliation firstly.1 Ideal graphene has outstanding
35
properties.2-6 However, structural defects can alter the mechanical and electronic
36
properties dramatically.7-13 Defective graphene shows promising application in
37
electronic devices and sensors due to its unique properties.7, 14-15 Atomistic simulation
38
of graphene reveals unexpected effect caused by defects.16-17 Unlike other bulk
39
materials, the sp2-hybridized carbon atoms can reorganize themselves and then form
40
different polygons, which causes the curvature of the graphene layer.18-19 Combined
41
with heat treatment, irradiation is an effective way to introduce defect in graphene
42
layer artificially.14, 20-23 These make defect a powerful approach to tailor / improve
43
properties of graphene. Defects are building blocks for the promising graphene-based
44
materials.
45
Intrinsic point defects (such as topological defects, vacancies and adatoms) of
46
graphene have been experimentally proved to be numerous. And these defects have a
47
strong impact on the mechanical, electronic and magnetic properties.13, 19, 24-29 With
48
the help of high-resolution transmission electron microscopy (HRTEM) and scanning
49
tunneling microscope (STM), structural defects in graphene can be recognized with
50
atomic resolution.14,
51
distortion which saturates two of the three dangling bonds toward the missing atom,
52
and this defect can induce intrinsic magnetism in graphene-based materials.9,
53
Divacancy [V2 (5-8-5) defect] will also undergo a structural reconstruction and it can
54
further rearrange its structure by a Stone-Wales type bond rotation.14 Calculated
55
results found that it is much easier for single vacancy diffusing on the graphene plane
56
than the divacancy.7 With tight-binding molecular dynamics (TBMD) simulations,
57
Lee et al.9 showed that two single vacancies may coalesce into V2 (5-8-5) defect at
58
3000 K then further reconstruct into a new defect structure [V2 (555-777) defect] at
59
higher temperatures. Under aberration-corrected HRTEM, it is found that V2 (555-777)
60
defect can also convert to V2 (5555-6-7777) defect by a bond rotation process
27, 30-32
Single-vacancy [V1 (5-9)] undergoes a Jahn-Teller
ACS Paragon Plus Environment
19
Page 3 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
61
similarly.14 A band gap of more than 0.3 eV is opened at the Fermi level in V2
62
(5555-6-7777) defect, which show the potential application in field-effect
63
transistors.33
64
generated accompanying with the vacancies. It has been experimentally observed in
65
the periphery of the vacancies.27 It can heal single-vacancy defect in graphite and the
66
energy barrier is 1.3 eV.34 The migration barrier of adatom is low and two
67
neighboring adatoms can form an Inverse Stone-Wales (ISW) defect.7, 35 Moreover,
68
the reaction barriers to construct the ISW defect are sufficiently low in the vicinity of
69
vacancies, another important ‘blister’ defect pattern could be achieved through the
70
thermally activated restructuring of coalesced adatoms.18 Actually, the adatom may
71
also coalesce with the vacancy defect while the interaction mechanisms are scarcely
72
understood at a basic level.
The adatom defect, formed by an additional carbon atom, is usually
73
Here we study the migration and coalescence of the common adatom defect and
74
the vacancy defect. We use density-functional theory (DFT) to make a systematical
75
study on the structural evolution of the migration and coalescence processes for these
76
point defects. Our results provide valuable information for the application of defect
77
nano-engineering and understanding the growth and annealing mechanisms.
78
2. Computational methods and details
79
Our calculations are performed using the density-functional theory (DFT)
80
framework, implemented in the DMOL3 package36-37. The calculations are performed
81
with a double numeric plus polarization (DNP) basis set.35 Generalized gradient
82
approximation (GGA) with the Perdew-Wang parameterization (PW91) is used to
83
describe the exchange-correlation energy functional.38 The simulated supercell
84
contains 128 carbon atoms of the mono-layer pristine graphene and the vacuum
85
region is selected to be 15Å to avoid the interaction between neighboring graphene
86
layers.9,
87
convergence of 1×10−5 hartree on the total energy. The calculated C-C bond length is
88
1.42Å, which agrees with previous researches.40-41
89
39-40
The Kohn–Sham equations are solved self-consistently with a
The formation energy Ef is defined as:
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 4 of 20
90
Ef=Ed+NμC- Ep
91
In this formula, Ed and Ep represent the total energies of defective and pristine
92
graphene, positive N represents the number of carbon atoms removed from the pristine
93
graphene (negative N represents the number of carbon atoms added to the pristine
94
graphene), andμC is the chemical potential of carbon atom.
eq. (1)
95
The linear or quadratic synchronous transit (LST/QST) transition state (TS)
96
search algorithm combined with conjugate gradient refinements and TS optimization
97
techniques are used to construct a reaction pathway and explore the energy barriers of
98
the structural evolution processes.42 A vibrational analysis is carried out to confirm
99
that the transition state configuration is stationary after a successful TS search
100
calculation. A true transition state will have exactly one mode with a negative
101
vibrational frequency (imaginary vibrational) while all other frequencies will be
102
real.43 Meanwhile, the confirmation calculations with the nudged-elastic band (NEB)
103
algorithm44 are performed to ensure the direct connection of transition states with the
104
respective reactant and product. This TS search method has been checked and made
105
comparisons with experimental results.35, 39
106
3. Results and discussion
107
3.1 Migration and coalescence of two single vacancies
108
It is well-known that defects are not always stationary and that their migration
109
has an important influence on the properties of a defective crystal. In graphene, each
110
defect shows certain mobility parallel to the graphene plane. The mobility might be
111
immeasurably low for extended vacancy complexes, or very high for adatoms on a
112
pristine graphene lattice. The migration is generally governed by an activation barrier
113
which depends on the defect type. Thus the migration increases exponentially with
114
temperature.
115
The simplest defect in any material is the missing lattice atom. As shown in
116
Figure 1, single-vacancy (SV) in graphene undergoes a Jahn-Teller distortion which
117
leads to the saturation of two of the three dangling bonds toward the missing atom.
118
One dangling bond always remains owing to geometrical reasons. This leads to the
119
formation of a five-membered and a nine-membered ring [V1(5-9) defect]. We
ACS Paragon Plus Environment
Page 5 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
120
determine that the formation energy of the SV defect is 7.73eV and the migration
121
energy barrier of a SV in pristine graphene is 1.33eV. These calculated results are
122
consistent with previous estimation.39
123
Previous studies showed that carbon implantation can produce single-vacancy
124
defects and vacancy clusters which induces the ferromagnetism of the system. When
125
the samples are annealed at 200 °C, the ferromagnetism disappears simultaneously.45
126
The migration and coalescence of single-vacancy is achievable by the tight-binding
127
molecular dynamics method.9
128
Here we calculate the energy barriers for each step of the migration, coalescence
129
and rearrangement processes by the transition state (TS) search method. We compare
130
different reaction paths and determine the most favorable one. The study of the
131
structural evolution processes of SV defects is essential for understanding the
132
annealing mechanisms and the influence on magnetic properties.
133
As shown in Figure 1, the migration processes of two neighboring SV defects
134
are investigated. Defect structure A (shown in Figure 1a) is defined as the initial
135
structure, then one SV defect V0 migrates toward carbon atom1. The migration
136
process of V0 can also be regarded as the hopping of carbon atom1. The energy barrier
137
is 1.26eV and it is a little lower than that of a SV defect migrates in pristine graphene.
138
Then the SV defect V1 (structure B) is formed as shown in Figure 1b. Similarly, defect
139
V1 can also migrate toward carbon atom2 and the two adjacent single vacancies
140
(Di-SV) defect is achieved finally (Figure 1c) with an energy barrier of 0.67eV. The
141
formation energy of the Di-SV defect is 12.74eV, and it is 2.28eV lower than that of
142
the two neighboring single vacancies. Figure 1d is the calculated energy profiles of
143
the migration processes of the two neighboring single vacancies. TA-B, TB-C is the
144
transition state of the two steps of the migration processes. The energy barrier of the
145
second migration step is much lower. These results suggest that the presence of SV
146
defect accelerates the migration of the neighboring SV defect to come together.
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
147 148 149
Figure 1 The migration processes of two neighboring single vacancies are studied by
150
the TS search method: (a) initial structure A in our calculation; (b) structure B; (c)
151
structure C; (d) Calculated energy profiles of the migration processes of the two
152
neighboring single vacancies, TA-B, TB-C is the transition state of the defect structure
153
A→B and B→C reaction path, respectively.
154 155
As shown in Figure 2a and 2b, the Di-SV defect can coalesce together and
156
become divacancy V2 (5-8-5). The formation energy of V2 (5-8-5) defect is 7.41eV,
157
which is much lower than Di-SV defect. Thus the energy release is abundant for the
158
coalescence process.
159
with tight-binding molecular dynamics (TBMD) simulation, and the calculated energy
160
barrier of the coalescence is 1.60eV with the TB method (1.52eV with LDA method).
Lee et al.9 presented the promising coalescence mechanisms
ACS Paragon Plus Environment
Page 6 of 20
Page 7 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
161
With the same reaction path (reaction path Ⅰ shown in Figure 2a), Zhang et al.39
162
show that the energy barrier is 2.17eV with the TS search method. However, we
163
propose two comparable reaction paths for the coalescence process of Di-SV defect to
164
the V2 (5-8-5) defect. In reaction path Ⅰ, carbon atom4 (colored in red) moves to the
165
site of vacancy V2 and carbon atom3 (colored in blue) occupies the site of atom4
166
simultaneously. TS1 is the transition state of the coalescence process and the energy
167
barrier of this reaction path is 1,97eV.
168
In the other reaction path (path II as shown in Figure 2b), the carbon atom4 is
169
rigid and then carbon atom3 moves to the site of vacancy V2 via a bond rotation. The
170
calculated energy barrier of this reaction path is 1.17eV, and TS2 is the transition state
171
of the coalescence process. The calculated results is obvious that the energy barrier of
172
reaction path Ⅱ is much lower than reaction path I. In a word, the energy barrier is
173
not high for the Di-SV defects coalesce to the divacancy [V2 (5-8-5)] defect and the
174
energy release is abundant. After the coalescence, the dangling bond of the SV defect
175
is saturated, so the V2 (5-8-5) defect is nonmagnetic. Our calculation results can
176
explain the disappearance of ferromagnetism after annealing.45
177
As shown in Figure 2c, the gray atoms represent TS1 structure and the brown
178
atoms represent the TS2 structure. The structural difference between the two
179
transition states is not obvious. The angle α is 132.79o for TS1 and 146.32o for TS2.
180
Thus we perform further calculations to compare the two transition states.
181
As shown in Figure 2c, the distribution of the bond lengths for the two transition
182
state structures is presented. The equilibrium C-C bond length of pristine graphene is
183
1.420Å (dashed line). We can clearly find that most of the bond lengths are near the
184
dashed line (the equilibrium C-C bond length) and the distribution of the bond lengths
185
for TS2 structure is closer to the dashed line. The calculated average bond length of
186
TS1 and TS2 is 1.426Å and 1.423Å, respectively. Since the existence of vacancy
187
defect, the average bond length is extended compared to the pristine graphene and the
188
TS2 shows a shorter average bond length. The shorter average bond length in TS2
189
explains the lower energy barrier of reaction path II.
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
190
In previous studies, reaction path Ⅰ is taken as the structural evolution process
191
for the coalescence of Di-SV defects. But our calculation results indicate that reaction
192
path II is more favorable due to lower energy barrier. Moreover, the coalescence of
193
Di-SV defects (1.17eV) also has a lower energy barrier than the migration of SV
194
(1.33eV) on graphene layer. Thus, the nearing SV defects will aggregate together
195
when they migrate on the graphene layer under irradiation heat treatment.
196
197 198
Figure 2 (a) Energy profiles for the coalescence of the Di-SV defect with the
199
transition path I;(b) Energy profiles for the coalescence of Di-SV with the transition
200
path II. (c) The distribution of the bond lengths of the two transition state structures,
201
the solid square represents the distribution of bond length for TS1 and the open circle
202
represents the distribution of bond length for TS2.
203 204
3.2 Structural rearrangement of divacancy defect
205
Divacancy defect can reconstruct itself and form different defect configurations.
206
The V2 (5-8-5) defect can become the V2 (555-777) defect via a Stone-Wales like
207
bond rotation. Similarly, the V2 (555-777) defect can also reconstruct itself and form
ACS Paragon Plus Environment
Page 8 of 20
Page 9 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
208
the V2 (5555-6-7777) defect. Three different configurations of the divacancy defect
209
and the structural reconstruction processes are illustrated in Figure 3. The transition
210
state (TS3) of the Stone-Wales type transformation for the V2 (5-8-5) defect is
211
determined and the calculated energy barrier of the structural rearrangement is 5.1eV.
212
The formation energy of the V2 (555-777) defect is 6.79eV and it is the lowest among
213
the three configurations of the divacancy defect. The further structural reconstruction
214
process of the V2 (555-777) defect is similar with an energy barrier of 6.28eV and
215
TS4 is the transition state. In addition, the formation energy of the V2 (5555-6-7777)
216
defect is 7.08eV, which is between the V2 (555-777) defect and the V2 (5-8-5) defect.
217
The energy barriers of the reconstruction processes are much higher than the
218
migration and coalescence processes of SV defects, and the structural rearrangements
219
are difficult to occur unless under particular conditions. Thus, the reconstructed
220
divacancy configurations are stable at room temperature and we can engineer
221
patterned defects with different configurations for interesting properties.
222
223 224
Figure 3 Energy profiles for the structural rearrangement of the divacancy defects,
225
TS3 is the transition state of the reconstruction process for V2 (5-8-5) defect to V2
226
(555-777) defect and TS 4 is the transition state of the reconstruction process for V2
227
(555-777) defect to V2 (5555-6-7777) defect.
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
228 229
3.3 Interaction of adatom defect and divacancy defect
230
The adatom defect is usually generated accompany with the vacancy defect and
231
it can heal the vacancy defect under radiation or heat treatment. Moreover, we can
232
engineer different defect patterns with the adatom defect artificially. V2 (5-8-5) defect
233
and V2 (555-777) defect are the most commonly studied divacancy defects in
234
graphene and carbon nanotube. We are interested in the migration and coalescence of
235
adatom defect in the periphery of the two common divacancy defects. Experimental
236
and calculated results show that the adatom defect prefers the bridge state structure on
237
graphene layer.27,
238
between the adjacent bonds. Once the adatom defect approaches near the divacancy
239
defect, the migration and coalescence processes become more complicated.
46
The adatom migrates toward the vacancy defect by hopping
240
In order to find the possible reaction paths of these structural evolution processes,
241
we perform the adsorption of carbon adatom (Cad) on the defective graphene firstly.
242
The adsorption model is illustrated in Figure 4. The Cad is introduced on the top of the
243
V2 (5-8-5) defect, and the distance is 3Å. Then the structure is optimized without any
244
constrains. The final defect structure of Cad on defective graphene is achieved after
245
geometrical optimization. A series of different adsorption sites near the divacancy
246
defect (in the red dashed circle shown in Figure 4a) are performed with the same
247
method. By analyzing the optimized final structures of the Cad adsorption, we can find
248
out the most possible migration and coalescence processes of the adatom defect. The
249
energy barriers of the structural evolution processes are determined by the TS search
250
method.
ACS Paragon Plus Environment
Page 10 of 20
Page 11 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
251 252
Figure 4 Adsorption model of carbon adatom (Cad) on the V2 (5-8-5) defect. (a) Top
253
view of the adsorption model and the adsorption area (in the red dashed circle) is
254
around the divacancy; (b) Side view and the distance between the Cad and the
255
defective graphene is 3Å.
256 257
After the calculation of Cad adsorption, we present the most possible migration
258
and coalescence processes of adatom defect with V2 (5-8-5) defect. The defect
259
configuration shown in Figure 5a (structure A1) is defined as the initial structure of
260
the calculation. Then the carbon adatom defect (Cad) migrates toward the V2 (5-8-5)
261
defect and structure B1 is formed. Afterwards, the Cad defect continues migrating and
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
262
there are three possible C-C bonds (b1, b2, and b3) where the Cad defect may hop
263
toward. The energy barriers of the three possible migration paths are determined. The
264
location of bond b1 is found to be the most favorable one. As shown in Figure 5c,
265
structure C1 is formed after the hopping of the Cad to bond b1. It is more complicated
266
containing a tetragon, a pentagon, a heptagon and a decagon, which cause the
267
curvature of the graphene. The side view of structure C1 is shown in Figure 5d. The
268
Cad defect is almost in the plane of the graphene layer in structure C1.
269
Structure C1 can be transformed into a SV defect (shown in Figure 4e and f).
270
Each possible recombination paths are considered and two reasonable ones are
271
presented. In one recombination path, as shown in Figure 5c, the carbon atom1
272
migrates to the site of the vacancy V1, meanwhile the carbon atom2 connects to the
273
adatom Cad and the recombination energy barrier is 1.36eV. Finally, the SV defect
274
structure E1 is achieved. In the other recombination path, the carbon atom2 migrates
275
to the site of the vacancy V2 with a C-C bond rotation and the other single vacancy
276
configuration (structure F1) is achieved. The recombination energy barrier is 1.95eV,
277
which is higher than that of the former reaction path. Thus the recombination path C1
278
to E1 is more energetically favorable. The calculated energy profiles are shown in
279
figure 5g. The SV defects formed in the two recombination paths are different, but the
280
sites of Cad defect in the two SV defects are consistent with each other.
281
In previous experimental researches, it is found that the adatoms appear mostly
282
in the vicinity of the vacancies and the vacancy and neighboring adatom has been
283
predicted to have a recombination barrier.27 As shown in Figure 5g, our results show
284
that the migration energy barrier of the Cad defect is 0.91eV and 0.73eV respectively,
285
but the recombination energy is 1.36eV, which is higher than the migration process.
286
Our calculation results are consistent with the experimental results. In summary, the
287
Cad defect migrates in graphene by hopping between the adjacent bonds, and when it
288
approaches the V2 (5-8-5) defect it can heal V2 (5-8-5) defect into a SV defect with an
289
energy release of 5.79eV. Thus, in order to get the designed defect pattern in the
290
vicinity of V2 (5-8-5) defect with adatom defect, it is essential to avoid the
291
recombination of the defects.
ACS Paragon Plus Environment
Page 12 of 20
Page 13 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
292
293 294
Figure 5 The migration and recombination processes of adatom defect and V2 (5-8-5)
295
defect: (a) initial structure A1 in our calculation; (b) structure B1; (c) Structure C1; (d)
296
Side view of structure C1; (e) Structure E1, it is a SV defect and the missed carbon
297
atom is in the site of vacancy V1; (f) Structure F1, it is another SV defect, and the
298
missed carbon atom is in the site of vacancy V2; (g) Calculated energy profiles of the
299
migration and recombination processes of Cad defect and V2 (5-8-5) defect, TA1-B1,
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
300
TB1-C1, TC1-E1, and TC1-F1 are the transition states of the structural evolution processes.
301 302
Similarly, we also study the migration and coalescence processes of Cad defect
303
and V2 (555-777) defect. As we discussed above, the Cad adsorption on V2 (555-777)
304
defect is studied firstly with the same method as the Cad adsorption on V2 (5-8-5)
305
defect. The most possible reaction paths of the migration and coalescence processes
306
are shown in Figure 6.
307
Structure A2 is defined as the initial structure. We find that Cad defect migrates
308
toward the V2 (555-777) defect by hopping between the adjacent bonds. Unlike the
309
migration processes toward V2 (5-8-5) defect, structure B2, C2, D2, E2, and F2 is
310
formed with the structural evolution processes of the Cad migration, respectively. The
311
energy barrier of the migration processes for A2→B2, B2→C2, C2→D2, D2→E2,
312
and E2→F2 is 0.43eV, 1.00eV, 0.78eV, 0.39eV and 0.56eV, respectively. As shown in
313
Figure 6e, two adjacent heptagon of the V2 (555-777) defect become two octagons
314
due to the presence of Cad defect in structure E2. Finally, Cad defect migrates to the top
315
of carbon atom Cm which is in the middle of the V2 (555-777) defect. Cad is connected
316
to the three adjacent carbon atoms and Cm, and the calculated bond length is 1.590 Å
317
and 1.565 Å (as shown in Figure 6f and g). The two carbon atoms (Cad and Cm) form a
318
dumbbell-like configuration. The calculated energy profiles are concluded in Figure
319
6h. The energy release of the recombination of the adatom defect and the V2 (555-777)
320
defect is 1.8eV, which is much lower than that of the adatom defect and the V2 (5-8-5)
321
defect. Our calculation results indicate that the adatom defect does not coalescence
322
with the V2 (555-777) defect.
323
V2(555-777) defect is more stable than V2(5-8-5), which makes V2(555-777)
324
harder to be healed. Our results indicate that V2(555-777) is a symmetrical structure
325
(Figure 6) and doesn’t show a suitable vacancy to incorporate the adatom. Moreover,
326
the adatom defect can migrate out of the V2(555-777) defect via reversed structural
327
evolution processes. However, V2(555-777) could rearrange to V2(5-8-5) with an
328
energy barrier 5.1eV (section 3.2) and can be healed by adatom indirectly.
ACS Paragon Plus Environment
Page 14 of 20
Page 15 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
329 330
Figure 6 The migration and recombination processes of adatom defect and V2
331
(555-777) defect: (a) initial structure A2 in our calculation; (b) structure B2; (c)
332
structure C2; (d) structure D2; (e) structure E2, two adjacent heptagon is formed; (f)
333
structure F2, the Cad defect is in the middle of the V2 (555-777) defect; (g) side view
334
of structure F2; (h) Calculated energy profiles of the migration and coalescence
335
processes of Cad defect and V2 (555-777) defect, TA2-B2, TB2-C2, TC2-D2, TD2-E2, and
336
TE2-F2 are the transition states of the structural evolution processes.
337 338
3
Conclusion
339
We systematically study the migration and coalescence processes of the common
340
point defects with the transition state search method. The migration energy barrier of
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
341
SV defect or Cad defect in pristine graphene is not high. The presence of SV defect
342
promotes the migration processes of another SV defect to come together and form the
343
Di-SV defect. The Di-SV defects can transform into a divacancy [V2 (5-8-5)] defect,
344
and we compare two possible reaction paths. Calculated energy barrier of the reaction
345
path II for the coalescence process is 1.17eV, and the reaction path Ⅱ is more
346
favorable. In addition, our calculation explains the disappearance of ferromagnetism
347
after annealing. V2 (5-8-5) defect can reconstruct itself to a more stable structure [V2
348
(555-777) defect], and V2 (555-777) defect can also reconstruct to V2 (5555-6-777)
349
defect. The energy barriers of the reconstruction processes are 5.1eV and 6.28eV,
350
which is much higher than the migration and coalescence processes of the single
351
vacancy defect.
352
show different behaviors. V2 (5-8-5) defect will be healed to a SV defect by the
353
adatom defect while the V2 (555-777) defect won’t be healed. The recombination
354
energy barrier of the carbon adatom defect and the V2 (5-8-5) defect is 1.36eV. Our
355
results provide the mechanism of migration and coalescence of point defects in
356
graphene, which is useful for nano-engineering of graphene with defect.
357
Acknowledgement:
When the divacancy defects meet the carbon adatom defect, they
358
The work is supported by the National Basic Research Program of China (973
359
Program, Grant No. 2012CB932400 and 2010CB934500), the National Natural
360
Science Foundation of China (Grant No. 91233115, 21273158, and 91227201), and a
361
Project Funded by the Priority Academic Program Development of Jiangsu Higher
362
Education Institutions (PAPD). This is also a project supported by the Fund for
363 364 365 366 367 368 369 370 371 372 373
Innovative Research Teams of Jiangsu Higher Education Institutions. Reference 1.
Novoselov, K. S.; Geim, A. K.; Morozov, S. V.; Jiang, D.; Zhang, Y.; Dubonos, S. V.; Grigorieva, I. V.;
Firsov, A. A. Electric Field Effect in Atomically Thin Carbon Films. Science 2004, 306 (5696), 666-669. 2.
Novoselov, K. S.; Jiang, Z.; Zhang, Y.; Morozov, S. V.; Stormer, H. L.; Zeitler, U.; Maan, J. C.;
Boebinger, G. S.; Kim, P.; Geim, A. K. Room-Temperature Quantum Hall Effect in Graphene. Science 2007, 315 (5817), 1379-1379. 3.
Morozov, S. V.; Novoselov, K. S.; Katsnelson, M. I.; Schedin, F.; Elias, D. C.; Jaszczak, J. A.; Geim, A.
K. Giant Intrinsic Carrier Mobilities in Graphene and its Bilayer. Phys Rev Lett 2008, 100 (1). 016602 4.
Balandin, A. A.; Ghosh, S.; Bao, W. Z.; Calizo, I.; Teweldebrhan, D.; Miao, F.; Lau, C. N. Superior
Thermal Conductivity of Single-Layer Graphene. Nano Lett 2008, 8 (3), 902-907.
ACS Paragon Plus Environment
Page 16 of 20
Page 17 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417
5.
Lee, C.; Wei, X.; Kysar, J. W.; Hone, J. Measurement of the Elastic Properties and Intrinsic Strength
of Monolayer Graphene. Science 2008, 321 (5887), 385. 6.
Novoselov, K. S.; Geim, A. K.; Morozov, S. V.; Jiang, D.; Katsnelson, M. I.; Grigorieva, I. V.; Dubonos,
S. V.; Firsov, A. A. Two-Dimensional Gas of Massless Dirac Fermions in Graphene. Nature 2005, 438 (7065), 197-200. 7.
Banhart, F.; Kotakoski, J.; Krasheninnikov, A. V. Structural Defects in Graphene. Acs Nano 2011, 5
(1), 26-41. 8.
Lehtinen, P.; Foster, A.; Ma, Y.; Krasheninnikov, A.; Nieminen, R. Irradiation-Induced Magnetism in
Graphite: a Density Functional Study. Phys Rev Lett 2004, 93 (18), 187202. 9.
Lee, G. D.; Wang, C.; Yoon, E.; Hwang, N. M.; Kim, D. Y.; Ho, K. Diffusion, Coalescence, and
Reconstruction of Vacancy Defects in Graphene Layers. Phys Rev Lett 2005, 95 (20), 205501. 10. Telling, R. H.; Ewels, C. P.; El-Barbary, A. A.; Heggie, M. I. Wigner Defects Bridge the Graphite Gap. Nature materials 2003, 2 (5), 333-337. 11. Gass, M. H.; Bangert, U.; Bleloch, A. L.; Wang, P.; Nair, R. R.; Geim, A. Free-Standing Graphene at Atomic Resolution. Nature nanotechnology 2008, 3 (11), 676-681. 12. Amorim, R. G.; Fazzio, A.; Antonelli, A.; Novaes, F. D.; da Silva, A. J. R. Divacancies in Graphene and Carbon Nanotubes. Nano Lett 2007, 7 (8), 2459-2462. 13. Tapaszto, L.; Dobrik, G.; Nemes-Incze, P.; Vertesy, G.; Lambin, P.; Biro, L. P. Tuning the Electronic Structure of Graphene by Ion Irradiation. Physical Review B 2008, 78 (23), 233407. 14. Kotakoski, J.; Krasheninnikov, A.; Kaiser, U.; Meyer, J. From Point Defects in Graphene to Two-Dimensional Amorphous Carbon. Phys Rev Lett 2011, 106 (10), 105505. 15. Schedin, F.; Geim, A.; Morozov, S.; Hill, E.; Blake, P.; Katsnelson, M.; Novoselov, K. Detection of Individual Gas Molecules Adsorbed on Graphene. Nature materials 2007, 6 (9), 652-655. 16. Grantab, R.; Shenoy, V. B.; Ruoff, R. S. Anomalous Strength Characteristics of Tilt Grain Boundaries in Graphene. Science 2010, 330 (6006), 946-948. 17. Wei, Y.; Wu, J.; Yin, H.; Shi, X.; Yang, R.; Dresselhaus, M. The Nature of Strength Enhancement and Weakening by Pentagon–Heptagon Defects in Graphene. Nature Materials 2012, 11 (9), 759-763. 18. Lusk, M. T.; Carr, L. D. Nanoengineering Defect Structures on Graphene. Phys Rev Lett 2008, 100 (17), 175503. 19. Ugeda, M. M.; Brihuega, I.; Guinea, F.; Gmez-Rodrguez, J. M. Missing Atom as a Source of Carbon Magnetism. Phys Rev Lett 2010, 104 (9), 96804. 20. Lehtinen, O.; Kotakoski, J.; Krasheninnikov, A.; Keinonen, J. Cutting and Controlled Modification of Graphene with Ion Beams. Nanotechnology 2011, 22, 175306. 21. Chen, J. H.; Cullen, W.; Jang, C.; Fuhrer, M.; Williams, E. Defect Scattering in Graphene. Phys Rev Lett 2009, 102 (23), 236805. 22. Krasheninnikov, A.; Banhart, F. Engineering of Nanostructured Carbon Materials with Electron or Ion Beams. Nature materials 2007, 6 (10), 723-733. 23. Compagnini, G.; Giannazzo, F.; Sonde, S.; Raineri, V.; Rimini, E. Ion Irradiation and Defect Formation in Single Layer Graphene. Carbon 2009, 47 (14), 3201-3207. 24. El-Barbary, A.; Telling, R.; Ewels, C.; Heggie, M.; Briddon, P. Structure and Energetics of the Vacancy in Graphite. Physical Review B 2003, 68 (14), 144107. 25. Jeong, B. W.; Ihm, J.; Lee, G. D. Stability of Dislocation Defect with Two Pentagon-Heptagon Pairs in Graphene. Physical Review B 2008, 78 (16), 165403. 26. Lee, G. D.; Wang, C.; Yoon, E.; Hwang, N. M.; Ho, K. Vacancy Defects and the Formation of Local
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461
Haeckelite Structures in Graphene from Tight-Binding Molecular Dynamics. Physical Review B 2006, 74 (24), 245411. 27. Hashimoto, A.; Suenaga, K.; Gloter, A.; Urita, K.; Iijima, S. Direct Evidence for Atomic Defects in Graphene Layers. Nature 2004, 430 (7002), 870-873. 28. Yazyev, O. V.; Louie, S. G. Topological Defects in Graphene: Dislocations and Grain Boundaries. Physical Review B 2010, 81 (19), 195420. 29. Tang, Q.; Zhou, Z.; Chen, Z. Graphene-Related Nanomaterials: Tuning Properties by Functionalization. Nanoscale 2013, 5 (11), 4541-4583. 30. Meyer, J. C.; Kisielowski, C.; Erni, R.; Rossell, M. D.; Crommie, M.; Zettl, A. Direct Imaging of Lattice Atoms and Topological Defects in Graphene Membranes. Nano Lett 2008, 8 (11), 3582-3586. 31. Warner, J. H.; Rmmeli, M. H.; Ge, L.; Gemming, T.; Montanari, B.; Harrison, N. M.; Bchner, B.; Briggs, G. A. D. Structural Transformations in Graphene Studied with High Spatial and Temporal Resolution. Nature nanotechnology 2009, 4 (8), 500-504. 32. Girit; Meyer, J. C.; Erni, R.; Rossell, M. D.; Kisielowski, C.; Yang, L.; Park, C. H.; Crommie, M.; Cohen, M. L.; Louie, S. G. Graphene at the Edge: Stability and Dynamics. Science 2009, 323 (5922), 1705. 33. Krasheninnikov, A.; Nieminen, R. Attractive Interaction between Transition-Metal Atom Impurities and Vacancies in Graphene: a First-Principles Study. Theoretical Chemistry Accounts: Theory, Computation, and Modeling (Theoretica Chimica Acta) 2011, 1-6. 34. Ewels, C.; Telling, R.; El-Barbary, A.; Heggie, M.; Briddon, P. Metastable Frenkel Pair Defect in Graphite: Source of Wigner Energy? Phys Rev Lett 2003, 91 (2), 25505. 35. Lusk, M. T.; Wu, D. T.; Carr, L. D. Graphene Nanoengineering and the Inverse Stone-Thrower-Wales Defect. Physical Review B 2010, 81 (15), 155444. 36. Delley, B. DMOL is Available Commercially from BIOSYM Technologies, San Diego. CA. Chem Phys 1990, 92, 508. 37. Delley, B. From Molecules to Solids with the DMol Approach. The Journal of Chemical Physics 2000, 113, 7756. 38. Perdew, J. P.; Wang, Y. Accurate and Simple Analytic Representation of the Electron-Gas Correlation-Energy. Physical Review B 1992, 45 (23), 13244-13249. 39. Zhang, H.; Zhao, M.; Yang, X.; Xia, H.; Liu, X.; Xia, Y. Diffusion and Coalescence of Vacancies and Interstitials in Graphite: A First-Principles Study. Diamond and Related Materials 2010, 19 (10), 1240-1244. 40. Sanyal, B.; Eriksson, O.; Jansson, U.; Grennberg, H. Molecular Adsorption in Graphene with Divacancy Defects. Physical Review B 2009, 79 (11), 113409. 41. Rajesh, C.; Majumder, C.; Mizuseki, H.; Kawazoe, Y. A Theoretical Study on the Interaction of Aromatic Amino Acids with Graphene and Single Walled Carbon Nanotube. The Journal of Chemical Physics 2009, 130, 124911. 42. Halgren, T. A.; Lipscomb, W. N. The Synchronous-Transit Method for Determining Reaction Pathways and Locating Molecular Transition States. Chemical physics letters 1977, 49 (2), 225-232. 43. Govind, N.; Petersen, M.; Fitzgerald, G.; King-Smith, D.; Andzelm, J. A Generalized Synchronous Transit Method for Transition State Location. Computational materials science 2003, 28 (2), 250-258. 44. Henkelman, G.; Jónsson, H. Improved Tangent Estimate in the Nudged Elastic Band Method for Finding Minimum Energy Paths and Saddle Points. The Journal of Chemical Physics 2000, 113 (22), 9978-9985. 45. Yang, X.; Xia, H.; Qin, X.; Li, W.; Dai, Y.; Liu, X.; Zhao, M.; Xia, Y.; Yan, S.; Wang, B. Correlation
ACS Paragon Plus Environment
Page 18 of 20
Page 19 of 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
The Journal of Physical Chemistry
462 463 464 465
between the Vacancy Defects and Ferromagnetism in Graphite. Carbon 2009, 47 (5), 1399-1406. 46. Li, L.; Reich, S.; Robertson, J. Defect Energies of Graphite: Density-Functional Calculations. Physical Review B 2005, 72 (18), 184109.
ACS Paragon Plus Environment
The Journal of Physical Chemistry
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
466 467
TOC
468 469
Migration and coalescence of point defects in mono-layer graphene studied by DFT
470 471
calculations
ACS Paragon Plus Environment
Page 20 of 20