Quantifying the Nucleation and Growth Kinetics of Electron Beam

Oct 23, 2018 - ... knob” for tuning nanocrystal nucleation and growth kinetics, but that more ... (c) The ratio of reducing species (aqueous electro...
0 downloads 0 Views 2MB Size
Subscriber access provided by Kaohsiung Medical University

Article

Quantifying the Nucleation and Growth Kinetics of Electron Beam Nanochemistry with Liquid Cell Scanning Transmission Electron Microscopy Mei Wang, Chiwoo Park, and Taylor J. Woehl Chem. Mater., Just Accepted Manuscript • DOI: 10.1021/acs.chemmater.8b03050 • Publication Date (Web): 23 Oct 2018 Downloaded from http://pubs.acs.org on October 24, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Quantifying the Nucleation and Growth Kinetics of Electron Beam Nanochemistry with Liquid Cell Scanning Transmission Electron Microscopy

Mei Wang,1 Chiwoo Park,2 Taylor J. Woehl1,* 1Department

of Chemical and Biomolecular Engineering, University of Maryland, College Park, MD

2Department

of Industrial and Manufacturing Engineering, Florida State University, Tallahassee, FL

*Corresponding

author, email: [email protected]

Abstract In this article, we report on complex nanochemistry and transport phenomena associated with silver nanocrystal formation by electron beam induced growth and liquid cell electron microscopy (LCEM). We synthesized silver nanocrystals using scanning transmission electron microscopy (STEM) electron beam induced synthesis and systematically varied the electron dose rate, a parameter thought to regulate nanocrystal formation kinetics via the rate of metal precursor reduction. Rationally modifying the solution chemistry with tertiary butanol to scavenge radical oxidizing species established a strongly reducing environment and enabled repeatable LCEM experiments. Interestingly, nanocrystal growth rate decreased with increasing electron dose rate despite the predicted increase in reductant concentration. We present evidence that this counterintuitive trend stems from increased oxidizing radical concentration and radical recombination at high magnifications, which together decrease rate of precursor reduction. Nucleation rate was proportional only to imaging magnification, which we rationalized based on local radical accumulation at high magnification causing increased supersaturation and rapid nucleation kinetics. Radiation chemistry and reactant diffusion scaling models yielded new scaling laws that quantitatively explained the observed effects of electron dose rate on nucleation and growth kinetics of metal nanocrystals. Finally, we introduce a new reaction kinetic model that enables unraveling nucleation and growth kinetics to probe nucleation kinetics occurring at sub-nanometer length scales, which are typically not accessible with LCEM. Our systematic investigation of metal nanocrystal formation kinetics with LCEM indicates that the intricacies 1 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 30

of radiation chemistry and reactant transport must be accounted for to effectively harness radical scavengers and electron beam induced growth to systematically probe metal nanocrystal formation kinetics. We expect the empirical trends, scaling laws, and reaction kinetic model presented here will be indispensable tools for in situ electron microscopists and materials chemists alike when designing, analyzing, and interpreting LCEM metallic nanocrystal formation data.

Introduction A unique aspect of colloidal nanochemistry compared to conventional molecular and supramolecular chemistry is the influential role of formation kinetics on resulting nanocrystal characteristics, such as size, shape, and surface structure.1 Because nanocrystal functional properties derive from these characteristics, formation kinetics effectively serve as an additional degree of control over nanocrystal properties in addition to the material composition. Colloidal nanocrystal formation proceeds by a complex combination of chemical and physical kinetic processes; precursor reduction is a chemical reaction, while nucleation is a physical phase transformation.2 Nanocrystal growth occurs by physical processes, such as aggregation and monomer attachment,3-6 chemical processes, such as autocatalytic growth,7, 8 or a combination of both.9 In particular, effects of nucleation on colloidal nanocrystal formation remain enigmatic1, 10, 11 due to difficulty in quantifying nucleation kinetics.12 Separating and elucidating fundamental mechanisms for nucleation and growth processes represents a significant current challenge to the nanomaterials research community, which if solved will enable deterministic synthesis of new nanostructures with increased complexity compared to current generation nanocrystals.13-15 Nanocrystal formation kinetics have been experimentally investigated with various approaches, including bulk reaction kinetic measurements,7 UV spectroscopy,10,

16-18

high energy x-ray diffraction

(HEXRD),19 small angle x-ray scattering (SAXS),20-23 and liquid cell electron microscopy (LCEM).24-29 In situ SAXS in particular is a powerful approach for resolving nanocrystal formation with high spatial resolution, as it allows detection of sub-nanometer sized nuclei and the time dependent particle size

2 ACS Paragon Plus Environment

Page 3 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

distribution (PSD),30 and can be quantified for interpretation by reaction kinetic models.22 However, in situ SAXS is limited in that it cannot resolve growth kinetics of individual nanocrystals with diverse shapes. LCEM is unique among these approaches due to its ability to provide direct microscopic images of nanocrystal formation with high spatial and temporal resolution.31, 32 Nanocrystal formation with LCEM is most often stimulated with the imaging electron beam, which reduces metal precursors into metal nanocrystals via the creation of radical species by radiolysis.33-35 Several fundamental challenges remain to be solved to enable utilizing LCEM to quantify nanocrystal formation kinetics in a manner similar to in situ SAXS.10,

32, 36

These include elucidating the local electron beam-induced solution chemistry,35,

37, 38

separating nucleation from growth kinetics, and enabling quantitative analysis of statistically relevant and repeatable data sets. Separating nucleation and growth kinetics is difficult because LCEM imaging in most transmission electron microscopes (TEM) only achieves nanometer scale resolution, while nuclei are subnanometer in size. Nucleation kinetics can be inferred by measuring the nucleation induction time,26 but direct systematic measurements of nucleation kinetics have yet to be realized with LCEM. Repeatability and reproducibility of electron beam induced nanocrystal formation has been a major challenge for LCEM researchers. Due to the small sample size, minute amounts of contaminants can significantly alter solution chemistry.33 For this reason, nanocrystal formation studies with LCEM are often limited to a few observations from a handful of experiments. Recent work has demonstrated improved repeatability during LCEM experiments through design of new microchips,36 modeling the effects of the electron beam on solution chemistry,37 and use of graphene and its derivatives to mitigate electron beam damage.39, 40 In this article, we demonstrate design and quantitative analysis of a parametric set of LCEM experiments probing the nanochemistry of electron beam induced silver nanocrystal formation. This study was enabled by innovations in rational control of solution chemistry, multitarget single nanoparticle tracking, scaling models for complex electron beam interactions, and a new reaction kinetic model for nanocrystal formation. We investigated a well-known model system of silver nanocrystal formation by electron beam reduction using scanning TEM (STEM) and systematically varied the electron dose rate, an important parameter thought to control the formation kinetics of nanocrystals and their growth 3 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 30

mechanisms.26, 28, 29 This large data set uniquely enabled us to search for and discover counterintuitive correlations among the nanocrystal formation kinetics that revealed new nanochemistry and physics associated with electron beam induced nanocrystal formation. Our results indicate that electron dose rate is not simply a ‘quantitative knob’ for tuning nanocrystal nucleation and growth kinetics, but that more complex nanochemistry and physical processes must be considered when designing and interpreting quantitative LCEM experiments.

Results Electron beam induced solution chemistry The area averaged dose rate of the electron beam during STEM imaging, 𝑑, quantifies the average amount of energy absorbed in the imaging area during LCEM imaging and is defined as 𝑑 =

𝑖𝑒𝑠

𝐴,

where 𝑖𝑒 is

𝑚2

the beam current, 𝑠 is the density normalized stopping power of water (2.798 𝑥 105 𝑒𝑉𝑘𝑔 at 200 kV), and 𝐴 is the surface area of the STEM image, which is inversely proportional to the square of the image magnification.28 Electron dose rate is thought to be a universal parameter for controlling nanocrystal formation rate during electron beam induced nanocrystal formation because it controls radical reducing agent concentration, infra vide.35 This suggests dose rate can be varied systematically to investigate nanocrystal formation kinetics and mechanisms in the same way that rate of reduction can be varied in wet chemical synthesis.18 Coupled with simulations to predict dose rate-dependent reducing agent concentrations,35 LCEM experiments will enable discovery of quantitative correlations between nanocrystal nucleation and growth kinetics, precursor conversion kinetics, and nanocrystal formation mechanisms. With this premise in mind, we performed a parametric set of silver nanocrystal formation experiments using LCEM and varied electron beam current from 21 – 207 𝑝𝐴 and image magnification between 80 – 150 𝑘𝑥 to vary the electron dose rate between values of 105 ― 107 𝐺𝑦/𝑠. All together, we probed 10 unique dose rates in 23 experiments by parametrically varying beam current and magnification.

4 ACS Paragon Plus Environment

Page 5 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

The imaging electron beam induces radiolysis of water molecules to form a mixture of both ― ,𝐻 ∙ oxidizing and reducing radicals via the fundamental water radiolysis reaction: 𝐻2𝑂→𝑒 ― 𝐻3𝑂 + ,𝑂𝐻 ∙ ,𝑒𝑎𝑞

,𝑂𝐻 ― ,𝐻2𝑂2,𝐻2,𝐻𝑂2. (Scheme 1).38 Oxidizing species (𝑂𝐻 ∙ ,𝑂2) concentrations exceed those of reducing ― ,𝐻 ∙ ) in pure water by more than an order of magnitude (Figure 1a); these significant oxidative species (𝑒𝑎𝑞

back reactions complicate nanocrystal formation kinetics and make it significantly different than common wet chemical syntheses.38 Nanocrystals still form in pure water due to the larger reducing reaction rate constants compared to oxidizing reactions, but can appear ‘fluffy’ due to simultaneous reduction and oxidation.41,

42

To eliminate oxidative back reactions and establish strong reducing conditions more

representative of wet chemical synthesis, we added 100 𝑚𝑀 tertiary-butanol to each precursor solution, a molecule we found to serve as a dual scavenger. Tertiary-butanol directly scavenges 𝑂𝐻 ∙ radicals, which in turn creates a radical byproduct that rapidly scavenges oxygen gas created by radiolysis (Scheme 1).38 Numerical kinetic simulations showed that addition of tertiary-butanol decreased oxidizing radical concentration by two orders of magnitude compared to pure water (Figure 1b), leading to strongly reducing conditions for dose rates used in our experiments (Figure 1c) (see supplementary material for details on kinetic simulations). Based on the excellent experimental repeatability we observed, we believe that tertiary butanol also acts to normalize the solution chemistry across each sample by overwhelming variable amounts of organic contamination in each sample that could react with oxidizing radicals.38, 40

Nanocrystal formation kinetics Electron beam induced silver nanocrystal formation in the presence of tertiary butanol produced ~500 – 1000 nanocrystals, which were observed to nucleate and grow on the silicon nitride membranes over several minutes and had final sizes ranging from 5 – 20 nm in diameter (Figure 2a). The nanocrystals were stationary during the experiments because they nucleated heterogeneously on the silicon nitride membrane and experienced strong Van der Waals attraction to the membrane. Nearly all nanoparticles were spherical-shaped except a small number (< 5%) of needle and rod-like nanoparticles that formed under

5 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 30

some experimental conditions. Ex-situ high resolution TEM (HRTEM) further confirmed the heterogeneous nucleation and revealed the nanocrystals were crystalline silver and predominantly spherical in shape (Figure 2b,c). The HRTEM images appeared to show smaller nanocrystals formed during LCEM experiments; this is due to the limited spatial resolution of the LCEM images, which only revealed nanocrystals larger than a couple nanometers. Importantly, we found that nucleation and growth overlapped in time, evidenced by the emergence of new nanocrystals simultaneous with their growth in time (Figure 2a). Due to this overlap, the average nanocrystal radius and number of nanocrystals as a function of time were ineffective quantitative measurements of growth and nucleation rates (see supplementary material). To facilitate progress in quantifying nucleation and growth kinetics, we instead analyzed growth trajectories of single nanocrystals over time using multitarget particle tracking,43,

44

which enabled

delineating nucleation from growth kinetics. Figure 2d shows an example of single particle tracking for a small subset of nanocrystals from a single LCEM movie. We used a metric known as nucleation induction time to quantify the nucleation rate because of the difficulty to directly detect nuclei, which are ~0.5 nm in size and form rapidly and sporadically. This metric is commonly used in quantitative nucleation studies and is defined as the amount of time between establishing supersaturation (i.e. when the electron beam is turned on) and detection of a crystal; it is inversely proportional to the nucleation rate.12 The red stars in Figure 2d indicate the time that each nanocrystal was detected, i.e. the nucleation induction times.26 Each nanocrystal that forms in an in situ movie has an induction time assigned via this definition; the distribution of induction times in Figure 2f indicates that nanoparticles continuously nucleated throughout the LCEM movie. The black lines in Figure 2d are linear fits to the nanocrystals’ growth trajectories and quantify the nanocrystal growth rates. Figures 2e and 2f show exemplary histograms of the growth rates and nucleation induction times for ~500 nanocrystals in a single LCEM movie. To reduce the substantial number of nucleation times and growth rates to two kinetic measurements for each experiment, we define the median growth rate (𝑅) and nucleation induction time (𝑡𝑖𝑛𝑑), shown by the dashed vertical lines. Nanochemistry of nanocrystal growth kinetics

6 ACS Paragon Plus Environment

Page 7 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Nanocrystal nucleation and growth kinetics were compared to the electron dose rate used for their synthesis. Surprisingly, we found no direct correlations between nucleation and growth kinetics and dose rate (see supplemental material). Examining the growth rate data more closely, we found that nanocrystal growth rate decreased with increasing magnification for a constant beam current and increased with beam current at constant magnification with a weak positive correlation (Figure 3a). The latter positive correlation is expected due to increased concentrations of radicals at high beam currents, but the former indicates growth rate decreases with dose rate when increasing magnification. This result is counter to all prior LCEM observations, which have exclusively shown growth rate is proportional to dose rate.28, 29 Indeed, this result indicates that the dependence of growth rate on electron beam parameters is more complex than previously thought and cannot simply be described by a universal parameter like dose rate. Why does nanocrystal growth rate decrease with increasing magnification (and dose rate)? Further interrogation of the data revealed that the growth rate for constant beam current followed a power law dependence on dose rate of 𝑅~𝑑 ―1/2 . Interestingly, the ratio of reducing species to oxidizing species concentration decreased with dose rate following the same power law, ostensibly due to depletion of the radical scavenger (Figure 1c). However, plotting growth rate as a function of 𝑑 ―1/2 yielded a plot where the growth rate data did not collapse onto a single curve (see supplementary material). Clearly the radiolysis kinetics alone do not explain the trend and there remain more complex underpinning chemical/physical phenomena. For further insight, we turn to the initial steps of radiolysis, which occur on time scales of picoseconds inside isolated spherical clusters of radicals called spurs.45 While spurs are typically separated in space, spur overlap at high dose rates causes enhanced radical recombination that decreases concentration of reducing and oxidizing radicals.46, 47 Grogan et al. developed scaling expressions for average interspur distance (𝑑𝑠𝑝𝑢𝑟) and spur density (𝜌𝑠𝑝𝑢𝑟) as a function of electron dose rate (see supplementary material).34 Based on typical spur size and the normal distribution of radicals within, two spurs are predicted to overlap and effect increased radical recombination when they are ≤ 6 𝑛𝑚 apart. Figure 3b shows that for all experimental conditions here the interspur distance is ≤ 6 𝑛𝑚 and that

7 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 30

interspur distance decreases and spur density increases with increasing beam current and magnification. Therefore, we posited that by considering spur overlap as a correction factor for radical concentration, all the growth rate data will collapse onto a single curve. Indeed, when we recast the growth rate in terms of the dose rate divided by the spur density, raised to the power of -1/2, viz.

( ) 𝑑

𝜌𝑠𝑝𝑢𝑟

―1/2

, we find an

unambiguous correlation with the growth rate with a Pearson’s correlation coefficient of 𝑅 = 0.94 (Figure 3c). This quantitative correlation, together with the experimental trends we observed, strongly supports the idea that this scaling argument directly correlates with the rate of precursor reduction during nanocrystal formation.

Nucleation kinetics and reactant transport Like growth rate, nucleation induction time did not correlate universally with dose rate but revealed correlations when holding electron beam parameters constant. Median nucleation time decreased approximately linearly with magnification for constant beam current (Figure 4a). Changing magnification during STEM imaging affects several physical parameters during the experiment, namely the interpixel spacing during the image raster and the total volume of liquid being irradiated by the electron beam (i.e. the interaction volume26). Increasing magnification and decreasing interaction volume could possibly increase the driving force for radical diffusion away from the nanocrystal growth area, but this would yield an opposite trend compared to what we observe. Instead, we focus in on radical diffusion near the electron probe during STEM imaging. The STEM electron probe is ~1 nm in diameter and rasters across the sample surface at high velocity, intermittently pausing at each pixel for 5 𝜇𝑠 (the pixel dwell time) to deliver electrons to form an image. At each pixel location, radicals are locally generated in the liquid and diffuse away due to large concentration gradients; the spacing of these local radical sources decreases with increasing magnification. We posit that the decreased pixel spacing at high magnification diminishes local concentration gradients and diffusive driving forces, which effects local accumulation of radicals. Large local radical concentrations rapidly reduce silver precursor, leading to a large supersaturation ratio and 8 ACS Paragon Plus Environment

Page 9 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

increased nucleation rate. To quantitatively test the proposed mechanism, we compare the characteristic time scale for interpixel radical diffusion, 𝜏𝐷, with the characteristic flight time of the electron beam between two pixels, 𝜏𝑓𝑙𝑖𝑔ℎ𝑡 (see supplementary material for derivation). As radical diffusion becomes faster than the beam movement (𝜏𝐷 ≪ 𝜏𝑓𝑙𝑖𝑔ℎ𝑡), we expect there will be a more significant concentration of radicals surrounding an adjacent pixel when it is irradiated, smoothing concentration gradients and diminishing diffusive driving forces. This is expected to lead to shorter nucleation induction times. Indeed, recasting nucleation induction time as a function of the ratio between these time scales, 𝜏𝐷/𝜏𝑓𝑙𝑖𝑔ℎ𝑡, reveals an unmistakable positive correlation in line with our proposed physical mechanism (R = 0.86). This correlation is interesting because it indicates that at least for these experimental conditions, dose rate and thus the expected concentration of reducing radicals, had negligible effects on nucleation kinetics. Figure 5 summarizes the proposed mechanisms for the effects of radiation chemistry and reactant transport on silver nanocrystal nucleation and growth kinetics.

Reaction kinetic model for nanocrystal formation The limited spatial resolution of LCEM, typically on the order of a couple nanometers, currently limits our ability to directly investigate kinetics of sub-nanometer scale processes like nucleation. The limited spatial resolution also indicates that the results of conventional particle tracking, such as average size and number of particles over time (see supplementary material), are influenced by both nanocrystal nucleation and growth. While single particle tracking can indirectly separate nucleation from growth kinetics, we desire a more general method to directly probe early-time nucleation kinetics occurring below the resolution limit of LCEM. To this end, we developed a reaction kinetic model to uncover nucleation kinetics. We draw our inspiration from seminal work by Finke et al., who interpreted nanocrystal formation in terms of pseudoelementary reactions for nucleation and growth.7,

8

A pseudo-elementary reaction is the sum of many

9 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 30

sequential reactions, only one of which is rate-limiting, and enables simplifying the complex kinetics of nanocrystal formation into a few tractable reactions. Our reaction kinetic model is as follows: kN Ag   S  N

(1)

k1 Ag   N surface   2 NP1, surface

(2)

kG Ag   2 NP1, surface   3 NP2, surface

(3)

Equation (1) represents nucleation, where 𝑆 are nucleation sites and 𝑁 are silver nuclei. Equation (2) represents growth of nuclei into nanocrystals that cannot be observed with LCEM, 𝑁𝑃1. Equation (3) represents growth of nanocrystals below LCEM detection into nanocrystals observed in experiments, 𝑁𝑃2. Several aspects of the new kinetic model are noteworthy. First, it is based on a two-step nucleation and autocatalytic growth reaction mechanism, which is commonly invoked for slow nanocrystal formation reactions.7 However, recent experiments have demonstrated the wide-spread applicability of this type of reaction model for both slow and fast nanocrystal growth kinetics.17, 19, 48 Secondly, our reaction kinetic model includes an intermediate growth reaction (equation 2) that takes into account growth of nanocrystals with sizes below the image spatial resolution. Ex situ HRTEM images confirmed the presence of silver nanocrystals below the resolution limit of LCEM and the particle tracking algorithm (< 2 nm) (Figure 2b,c). Nanocrystals formed on the silicon nitride membrane surface and only within the electron irradiated area, so each reaction above is inherently a surface reaction in terms of surface concentration of each species. Nanocrystals only form on the membrane surface, so there is limited area available for nucleation and growth. To account for this unique aspect of LCEM, we included an additional species in the nucleation reaction that accounts for the limited number of nucleation sites, 𝑆. Experimental measurements of nanocrystal PSD as function of time were transformed into total surface molarity of nanocrystals, [𝑁𝑃2], and assuming mass-action kinetics the rate expressions were numerically integrated and fit to the kinetic data with the rate constants as fitting parameters (See supplemental material for details). The kinetic model was fit to the first 60 seconds of in situ data due to the formation of silver needles and nanorods and particle aggregation and coalescence at later stages of the 10 ACS Paragon Plus Environment

Page 11 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

LCEM experiments. The plots of [𝑁𝑃2] show a characteristic initial lag time, ostensibly due to finite nucleation rate and growth of nanocrystals below the resolution limit of LCEM (Figure 6a). Examples of the reaction model fits to experimental data for nanocrystal formation at two different magnifications are shown in Figure 6a. The reaction model fits our experimental data very well compared to kinetic models that don’t include the intermediate growth step or the nucleation site species (see supplementary material). The time course of each species concentration at 100 kx magnification in Figure 6b shows that nucleation sites were depleted over time as nucleation proceeded. The nuclei concentration peaked between 15-20 seconds, characteristic of ‘burst’ nucleation and similar to prior kinetic models for nanocrystal formation.9 Once nuclei formed, 𝐴𝑔+ reduced on the nuclei surface to effect growth of small nanocrystals that were not observed by LCEM (𝑁𝑃1). Shortly after formation of 𝑁𝑃1, larger nanocrystals that were detected in LCEM images, 𝑁𝑃2, emerged. This reaction cascade provides a qualitative explanation for the time lag in appearance of nanocrystals, which is due to a combination of nucleation and growth kinetics. Only by implementing this reaction kinetic model were we able to unravel and quantify the contribution of these two effects to the lag time. The time course of the 150 kx data set is shown in Figure 6c. Each of the timedependent species concentrations showed qualitatively similar trends compared with the lower magnification. At higher magnification, the peak in nuclei concentration occurred earlier indicating that higher magnification yielded faster nucleation, in agreement with our single particle tracking measurements (Figure 4). It is remarkable that the fitted growth rate (𝑘𝐺) and nucleation rate (𝑘𝑁) constants derived from this ensemble kinetic model followed identical trends as the median growth rate and nucleation induction time derived from single particle tracking (Figure 6d,e). This agreement with experimentally measured formation kinetics provides strong evidence that our reaction kinetic model is truly capturing the nanocrystal formation kinetics.22 Most importantly, this reaction kinetic model reveals sub-spatial resolution details about nucleation kinetics. Specifically, it reveals that nucleation occurs in a burst at early times and that the main precursor conversion channel shifts from nucleation to growth as surface sites are depleted. The nucleation site parameter, 𝑆, is solely responsible for capturing this kinetic behavior and was

11 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 30

therefore critical to enable successful implementation of this model. This reaction kinetic model should be generally applicable to all metal nanocrystal formation LCEM experiments, as it captures specific aspects of LCEM including the limited number of nucleation sites and limited spatial resolution. Additional reactions could be included to account for nanocrystal growth by aggregation.9, 49

Discussion Considering our results showing nucleation and growth kinetics were not simply correlated with dose rate, we must reconsider how to undertake quantitative investigations of nanocrystal formation with LCEM. For instance, testing whether nanocrystal nucleation can be explained by classical nucleation theory (CNT) or more complex 2-step mechanisms, one could vary the supersaturation ratio and measure resulting nucleation rate.2 If CNT is an accurate model, the natural logarithm of nucleation rate (𝐽) should be directly 1

proportional to the inverse square of the logarithm of supersaturation ratio (𝑆), viz. ln (𝐽) ∝ ln (𝑆)2. While prior results suggested the supersaturation ratio could be varied systematically by varying the dose rate, our new results establish this is not the case for silver nanocrystal formation using STEM imaging. In fact, the supersaturation ratio during electron beam induced nanocrystal formation is on the order of 104 ― 105,50, 51 suggesting that nucleation rate may be so large that changes in dose rate and rate of precursor reduction are not significant enough to observe changes in nucleation rate. Progress in utilizing LCEM to investigate nanocrystal nucleation mechanisms will be enabled by more detailed modelling of radical diffusion during LCEM imaging37 or through utilizing new liquid heating sample cells that enable varying sample temperature.52 More detailed modeling should be aimed at deriving quantitative relationships between the nucleation scaling laws developed here and local supersaturation ratio, which is the fundamental parameter underlying nucleation kinetics. The outlook for varying dose rate during STEM imaging to systematically investigate growth mechanisms is promising due to the seemingly general nature of the scaling law we discovered for metal nanocrystal formation. However, several fundamental challenges still need to be addressed. Given the

12 ACS Paragon Plus Environment

Page 13 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

correlations we have established between growth rates and spur density, the effects of beam current and magnification on growth rate are more complex than previously thought. In comparison, Alloyeau et al. and Park et al. observed a simple power law dependence of gold nanocrystal growth rate on electron dose rate.28, 29 While the addition of tertiary butanol established more reducing conditions in our experiments, it caused a dose rate-dependent ratio between reducing and oxidizing radical concentration, which was directly reflected in the nanocrystal growth kinetics. Taken together, this suggests that researchers should consider several factors when designing quantitative LCEM metal nanocrystal synthesis (or dissolution) experiments, including the identities of the reacting radicals and precursors, imaging mode, radical scavenger reactions, and whether spur overlap will significantly affect radical concentrations. We propose general scaling laws to describe the nanochemistry of electron beam induced metal nanocrystal growth, based on the results reported in this article and prior studies discussed below: 𝑅∝

𝑑 𝛽 𝜌𝑠𝑝𝑢𝑟

( ) 𝑖𝑓 𝑑

𝑅 ∝ 𝑑𝛽

𝑠𝑝𝑢𝑟

≤ 6 𝑛𝑚

𝑖𝑓 𝑑𝑠𝑝𝑢𝑟 > 6 𝑛𝑚.

(4a) (4b)

Here 𝛽 is a generalized parameter that captures the impact of dose rate on the effective ‘reducing strength’ of the solution chemistry. In our experiments 𝛽 = ―1/2 emerged from the power law dependence of reducing agent to oxidizer concentration ratio on the dose rate (cf. Figure 1c). More generally, 𝛽 will depend on the specific reduction and oxidation reactions the metal precursor and nanocrystals undergo and any radical scavengers present. The generality of the scaling law above is further supported by prior LCEM experiments by Park et al. and Alloyeau et al.28, 29 Park et al. found that the growth rate of gold nanocrystals followed a power law dependence on dose rate with 𝛽 = 0.76, while Alloyeau et al. found similar values of 𝛽 = 0.69 for gold nanoplates and 𝛽 = 0.63 for gold nanoprisms. Gold nanocrystals and their precursors do not undergo any significant oxidization reactions, so the experimentally determined power law exponent in Park et al. matched the power law dependence of aqueous electron concentration on dose rate.29 Generally, 𝛽 can be determined for electron beam induced metal nanocrystal growth as follows: (1) consider all significant oxidizing and reducing reactions the precursor and nanocrystals undergo; (2) determine 13 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 30

concentrations of oxidizing and reducing species that participate in these reactions (cf. Figure 1); (3) 𝛽 is equal to either (i) the power law dependence of the reducing agent concentration on dose rate (if there are only reducing reactions28, 29) or (ii) the power law dependence of the ratio of the reducing to oxidizing species concentrations (if there are competing reducing and oxidizing reactions, as in the current work). STEM or TEM imaging modes introduce differences in the nanocrystal growth behavior that must be considered to extend our results to TEM imaging mode. The spur density in equation (4a) is a correction factor for enhanced radical recombination at high dose rate and should not be included in the scaling law if the calculated 𝑑𝑠𝑝𝑢𝑟 > 6 𝑛𝑚 (equation 4b). In general, the spur separation in TEM imaging mode will be large and will not affect the solution chemistry.34 This claim is supported by the study of Park et al., who used TEM irradiation to form gold nanocrystals and found the growth rate followed a simple power law dependence on dose rate. Prior work by Abellan et al. explored the growth of Ag nanocrystals in DI water in STEM and TEM mode at the same cumulative dose and found particles with similar shape were synthesized in both modes; however, more particles formed in STEM mode.27 This was attributed to the large amounts of electrons delivered locally to the sample that established local supersaturation of silver more rapidly compared to TEM mode, akin to the nucleation mechanism discussed in this article. More recently, Zhang et al. synthesized gold nanocrystals in DI water using electron beam induced growth and found few differences between TEM and STEM mode.42 Our results, taken together with the prior experiments discussed above, strongly suggest the nucleation and growth scaling laws we discovered will be generally applicable to the nucleation and growth of metal nanocrystals by TEM and STEM imaging modes.

Conclusions We systematically investigated the nanochemistry of electron beam induced formation of silver nanocrystals using LCEM. Single particle tracking and a nanocrystal formation reaction kinetic model enabled decoupling nucleation and growth kinetics to discover complex and counterintuitive correlations between formation kinetics, the electron beam stimulus, and solution chemistry. While electron dose rate 14 ACS Paragon Plus Environment

Page 15 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

has been thought to universally control nanocrystal formation rate, we found no direct correlations between it and nucleation and growth kinetics. Instead we discovered growth rate correlated with a power law dependence on the dose rate, normalized to the spur density. Nucleation kinetics were independent of beam current and correlated with interpixel radical diffusion times scales. Importantly, these results indicate that nucleation and growth kinetics are controlled by independent electron beam parameters, which suggests each kinetic process could be independently investigated by careful design of experiments. Our results indicate that the details of radiation chemistry and reactant transport must be carefully considered to effectively utilize radical scavengers and the electron beam as a stimulus for nanocrystal formation. The conclusions of this article should be generally applicable to other types of metallic nanocrystals formed by electron beam induced growth and STEM imaging and extended to TEM imaging mode by considering differences between the two imaging modes.

Acknowledgements T.J.W. acknowledges funding from Oak Ridge Associated Universities (ORAU, Award #17061851) and University of Maryland start-up funds. M.W. acknowledges funding from a Harry K. Wells Fellowship from the University of Maryland Energy Research Center. C.P. acknowledges partial funding from Air Force Office of Scientific Research (Grant #FA9550-18-1-0144). T.J.W. and M.W. designed the research, interpreted the data, and wrote the manuscript. C.P. performed multitarget particle tracking. All authors comments on the manuscript.

Experimental Methods A 10 mM silver nitrate (AgNO3) stock solution was prepared by dissolving salt (Alfa Aesar, ACS, 99.9+%) in DI water (18.2 MΩ) and then diluted to 0.1 mM together with tertiary butanol (Sigma-Aldrich ≥99.5%). For the experiments, an aqueous solution of 0.1 mM AgNO3 and 0.1 M tertiary butanol was used as the precursor solution. The precursor solution was degassed by bubbling with argon gas for one hour before experiments. 15 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 30

All experiments were performed on a Protochips liquid cell sample holder (Poseidon Select). The liquid cell sample was prepared by sandwiching two silicon chips (Protochips) together dry. A free standing 50 nm thick silicon nitride window with a dimension of 550 × 50 µm on each chip allows the electron beam to pass through. 150 nm spacer chips were used for all experiments. Prior to experiments, both chips were rinsed by acetone followed by methanol and then plasma cleaned (Harrick Plasma, PDC-32G) for 3 minutes to remove organic contamination and make the surface hydrophilic. Precursor solution was stored in a 5 mL gas-tight glass syringe (Hamilton 700) and was pumped between the two E-chips by syringe pump (Harvard Apparatus) with a flow rate of 300 µL/hr for an hour to remove any air bubbles before liquid cell experiments. Each synthesis experiment was performed at the same distance from the edge of the imaging window to ensure the same liquid thickness and 10 𝜇𝑚 apart from each other to limit depletion of precursor. The LCEM experiments were performed with a JEOL JEM-2100F TEM operated in scanning mode (STEM) with an accelerating voltage of 200 kV. STEM was operated with Digital Micrograph using a 1024*1024 pixel image size and 5 µs dwell time to generate movies. Movies were recorded with Camtasia Studios at 10 frames/s. Prior to each particle growth experiment, precursor solution was flowed for 5 minutes at a flow rate of 300 µL/hr. After liquid cell experiments, silicon E-chips were rinsed by DI water and then dried for the ex-situ HRTEM. The ex-situ HRTEM images were acquired on a JEOL JEM-2100 LaB6 TEM. Images were acquired with Gatan Digital Micrograph and processed by Image J. See supplemental materials for details on LCEM nanocrystal growth movie image analysis.43, 44 Electron energy loss spectroscopy (EELS) was used to measure the actual liquid thickness for several samples at different locations. The spectra were captured in Digital Micrograph and then processed by MATLAB (see supplementary material). The thickness can be calculated via the log-ratio method using the equation 𝑡 = 𝜆𝐼𝑛(𝐼𝑡/𝐼0)

(5)

16 ACS Paragon Plus Environment

Page 17 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Where 𝑡 is the liquid thickness, 𝜆 is the inelastic mean free path of 185 nm.53, 54 𝐼𝑡 is the total integrated intensity of the spectrum and 𝐼0 is the total integrated intensity of the zero-loss peak. The final liquid thickness was estimated to be ≈ 900 𝑛𝑚. The thicker liquid is due to the bowing of the silicon nitride membranes as well as unavoidable contaminant particles on the chip surface. Supporting Information Supporting plots from data analysis, derivation of scaling models, radiolysis kinetics simulation methods, derivation of nanocrystal formation kinetics model and disproof of alternate nanocrystal formation kinetic models, image analysis methods, EELS liquid thickness measurement data. This material is available free of charge via the Internet at http://pubs.acs.org.

References 1. Xia, Y. N.; Xia, X. H.; Peng, H. C., Shape-Controlled Synthesis of Colloidal Metal Nanocrystals: Thermodynamic versus Kinetic Products. J. Am. Chem. Soc. 2015, 137, (25), 7947-7966. 2. Thanh, N. T. K.; Maclean, N.; Mahiddine, S., Mechanisms of Nucleation and Growth of Nanoparticles in Solution. Chem. Rev. 2014, 114, (15), 7610-7630. 3. Sugimoto, T., PREPARATION OF MONODISPERSED COLLOIDAL PARTICLES. Adv. Colloid Interface Sci. 1987, 28, (1), 65-108. 4. Li, D. S.; Nielsen, M. H.; Lee, J. R. I.; Frandsen, C.; Banfield, J. F.; De Yoreo, J. J., DirectionSpecific Interactions Control Crystal Growth by Oriented Attachment. Science 2012, 336, (6084), 10141018. 5. Zhang, H. Z.; Banfield, J. F., Kinetics of crystallization and crystal growth of nanocrystalline anatase in nanometer-sized amorphous titania. Chem. Mater. 2002, 14, (10), 4145-4154. 6. Wang, F. D.; Richards, V. N.; Shields, S. P.; Buhro, W. E., Kinetics and Mechanisms of Aggregative Nanocrystal Growth. Chem. Mater. 2014, 26, (1), 5-21. 7. Watzky, M. A.; Finke, R. G., Nanocluster size-control and "magic number" investigations, experimental tests of the "living-metal polymer" concept and of mechanism-based size-control predictions leading to the syntheses of iridium(0) nanoclusters centering about four sequential magic numbers. Chem. Mater. 1997, 9, (12), 3083-3095. 8. Watzky, M. A.; Finke, R. G., Transition metal nanocluster formation kinetic and mechanistic studies. A new mechanism when hydrogen is the reductant: Slow, continuous nucleation and fast autocatalytic surface growth. J. Am. Chem. Soc. 1997, 119, (43), 10382-10400. 9. Kent, P. D.; Mondloch, J. E.; Finke, R. G., A Four-Step Mechanism for the Formation of Supported-Nanoparticle Heterogenous Catalysts in Contact with Solution: The Conversion of Ir(1,5COD)Cl/gamma-Al2O3 to Ir(0)(similar to 170)/gamma-Al2O3. J. Am. Chem. Soc. 2014, 136, (5), 19301941. 10. Yang, T. H.; Gilroy, K. D.; Xia, Y. N., Reduction rate as a quantitative knob for achieving deterministic synthesis of colloidal metal nanocrystals. Chem. Sci. 2017, 8, (10), 6730-6749. 17 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 30

11. Xie, R. G.; Li, Z.; Peng, X. G., Nucleation Kinetics vs Chemical Kinetics in the Initial Formation of Semiconductor Nanocrystals. J. Am. Chem. Soc. 2009, 131, (42), 15457-15466. 12. Sear, R. P., Quantitative studies of crystal nucleation at constant supersaturation: experimental data and models. CrystEngComm. 2014, 16, (29), 6506-6522. 13. Fenton, J. L.; Steimle, B. C.; Schaak, R. E., Tunable intraparticle frameworks for creating complex heterostructured nanoparticle libraries. Science 2018, 360, (6388), 513-517. 14. Fenton, J. L.; Hodges, J. M.; Schaak, R. E., Synthetic Deconvolution of Interfaces and Materials Components in Hybrid Nanoparticles. Chem. Mater. 2017, 29, (14), 6168-6177. 15. Sun, S. B.; Yuan, D.; Xu, Y.; Wang, A. F.; Deng, Z. T., Ligand-Mediated Synthesis of ShapeControlled Cesium Lead Halide Perovskite Nanocrystals via Reprecipitation Process at Room Temperature. Acs Nano 2016, 10, (3), 3648-3657. 16. Li, J. Z.; Wang, H. F.; Lin, L.; Fang, Q.; Peng, X. G., Quantitative Identification of Basic Growth Channels for Formation of Monodisperse Nanocrystals. J. Am. Chem. Soc. 2018, 140, (16), 5474-5484. 17. Yang, T. H.; Zhou, S.; Gilroy, K. D.; Figueroa-Cosme, L.; Lee, Y. H.; Wu, J. M.; Xia, Y. N., Autocatalytic surface reduction and its role in controlling seed-mediated growth of colloidal metal nanocrystals. Proc. Natl. Acad. Sci. U. S. A. 2017, 114, (52), 13619-13624. 18. Wang, Y.; Peng, H. C.; Liu, J. Y.; Huang, C. Z.; Xia, Y. N., Use of Reduction Rate as a Quantitative Knob for Controlling the Twin Structure and Shape of Palladium Nanocrystals. Nano Lett. 2015, 15, (2), 1445-1450. 19. Liu, Q.; Gao, M. R.; Liu, Y. Z.; Okasinski, J. S.; Ren, Y.; Sun, Y. G., Quantifying the Nucleation and Growth Kinetics of Microwave Nanochemistry Enabled by in Situ High-Energy X-ray Scattering. Nano Lett. 2016, 16, (1), 715-720. 20. Polte, J.; Herder, M.; Erler, R.; Rolf, S.; Fischer, A.; Wurth, C.; Thunemann, A. F.; Kraehnert, R.; Emmerling, F., Mechanistic insights into seeded growth processes of gold nanoparticles. Nanoscale 2010, 2, (11), 2463-2469. 21. Polte, J.; Erler, R.; Thunemann, A. F.; Emmerling, F.; Kraehnert, R., SAXS in combination with a free liquid jet for improved time-resolved in situ studies of the nucleation and growth of nanoparticles. Chem. Commun. 2010, 46, (48), 9209-9211. 22. Mozaffari, S.; Li, W. H.; Thompson, C.; Ivanov, S.; Seifert, S.; Lee, B.; Kovarik, L.; Karim, A. M., Colloidal nanoparticle size control: experimental and kinetic modeling investigation of the ligand metal binding role in controlling the nucleation and growth kinetics. Nanoscale 2017, 9, (36), 1377213785. 23. Wu, L. H.; Lian, H. D.; Wills, J. J.; Goodman, E. D.; McKay, I. S.; Qin, J.; Tassone, C. J.; Cargnello, M., Tuning Precursor Reactivity toward Nanometer-Size Control in Palladium Nanoparticles Studied by in Situ Small Angle X-ray Scattering. Chem. Mater. 2018, 30, (3), 1127-1135. 24. Zheng, H. M.; Smith, R. K.; Jun, Y. W.; Kisielowski, C.; Dahmen, U.; Alivisatos, A. P., Observation of Single Colloidal Platinum Nanocrystal Growth Trajectories. Science 2009, 324, (5932), 1309-1312. 25. Liao, H. G.; Cui, L. K.; Whitelam, S.; Zheng, H. M., Real-Time Imaging of Pt3Fe Nanorod Growth in Solution. Science 2012, 336, (6084), 1011-1014. 26. Woehl, T. J.; Evans, J. E.; Arslan, L.; Ristenpart, W. D.; Browning, N. D., Direct in Situ Determination of the Mechanisms Controlling Nanoparticle Nucleation and Growth. Acs Nano 2012, 6, (10), 8599-8610. 27. Abellan, P.; Woehl, T. J.; Parent, L. R.; Browning, N. D.; Evans, J. E.; Arslan, I., Factors influencing quantitative liquid (scanning) transmission electron microscopy. Chem. Commun. 2014, 50, (38), 4873-4880. 28. Alloyeau, D.; Dachraoui, W.; Javed, Y.; Belkahla, H.; Wang, G.; Lecoq, H.; Ammar, S.; Ersen, O.; Wisnet, A.; Gazeau, F.; Ricolleau, C., Unravelling Kinetic and Thermodynamic Effects on the Growth of Gold Nanoplates by Liquid Transmission Electron Microscopy. Nano Lett. 2015, 15, (4), 2574-2581.

18 ACS Paragon Plus Environment

Page 19 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

29. Park, J. H.; Schneider, N. M.; Grogan, J. M.; Reuter, M. C.; Bau, H. H.; Kodambaka, S.; Ross, F. M., Control of Electron Beam-Induced Au Nanocrystal Growth Kinetics through Solution Chemistry. Nano Lett. 2015, 15, (8), 5314-5320. 30. Polte, J.; Erler, R.; Thunemann, A. F.; Sokolov, S.; Ahner, T. T.; Rademann, K.; Emmerling, F.; Kraehnert, R., Nucleation and Growth of Gold Nanoparticles Studied via in situ Small Angle X-ray Scattering at Millisecond Time Resolution. Acs Nano 2010, 4, (2), 1076-1082. 31. de Jonge, N.; Ross, F. M., Electron microscopy of specimens in liquid. Nat. Nanotechnol. 2011, 6, (11), 695-704. 32. Ross, F. M., Opportunities and challenges in liquid cell electron microscopy. Science 2015, 350, (6267), aaa9886. 33. Woehl, T. J.; Jungjohann, K. L.; Evans, J. E.; Arslan, I.; Ristenpart, W. D.; Browning, N. D., Experimental procedures to mitigate electron beam induced artifacts during in situ fluid imaging of nanomaterials. Ultramicroscopy 2013, 127, 53-63. 34. Grogan, J. M.; Schneider, N. M.; Ross, F. M.; Bau, H. H., Bubble and Pattern Formation in Liquid Induced by an Electron Beam. Nano Lett. 2014, 14, (1), 359-364. 35. Schneider, N. M.; Norton, M. M.; Mendel, B. J.; Grogan, J. M.; Ross, F. M.; Bau, H. H., Electron-Water Interactions and Implications for Liquid Cell Electron Microscopy. J. Phys. Chem. C 2014, 118, (38), 22373-22382. 36. Moser, T. H.; Mehta, H.; Park, C.; Kelly, R. T.; Shokuhfar, T.; Evans, J. E., The role of electron irradiation history in liquid cell transmission electron microscopy. Sci. Adv. 2018, 4, (4). eaaq1202. 37. Gupta, T.; Schneider, N. M.; Park, J. H.; Steingart, D.; Ross, F. M., Spatially dependent dose rate in liquid cell transmission electron microscopy. Nanoscale 2018, 10, (16), 7702-7710. 38. Woehl, T. J.; Abellan, P., Defining the radiation chemistry during liquid cell electron microscopy to enable visualization of nanomaterial growth and degradation dynamics. J. Microsc. 2017, 265, (2), 135-147. 39. Wang, C.; Qiao, Q.; Shokuhfar, T.; Klie Robert, F., High-Resolution Electron Microscopy and Spectroscopy of Ferritin in Biocompatible Graphene Liquid Cells and Graphene Sandwiches. Adv. Mater. 2014, 26, (21), 3410-3414. 40. Cho, H.; Jones, M. R.; Nguyen, S. C.; Hauwiller, M. R.; Zettl, A.; Alivisatos, A. P., The Use of Graphene and Its Derivatives for Liquid-Phase Transmission Electron Microscopy of Radiation-Sensitive Specimens. Nano Lett. 2017, 17, (1), 414-420. 41. Jungjohann, K. L.; Bliznakov, S.; Sutter, P. W.; Stach, E. A.; Sutter, E. A., In Situ Liquid Cell Electron Microscopy of the Solution Growth of Au-Pd Core-Shell Nanostructures. Nano Lett. 2013, 13, (6), 2964-2970. 42. Zhang, Y.; Keller, D.; Rossell, M. D.; Erni, R., Formation of Au Nanoparticles in Liquid Cell Transmission Electron Microscopy: From a Systematic Study to Engineered Nanostructures. Chem. Mater. 2017, 29, (24), 10518-10525. 43. Vo, G. D.; Park, C., Robust regression for image binarization under heavy noise and nonuniform background. Pattern Recognit. 2018, 81, 224-239. 44. Park, C.; Woehl, T. J.; Evans, J. E.; Browning, N. D., Minimum Cost Multi-Way Data Association for Optimizing Multitarget Tracking of Interacting Objects. IEEE Trans. Pattern Anal. Mach. Intell. 2015, 37, (3), 611-624. 45. Schwarz, H. A., APPLICATIONS OF SPUR DIFFUSION MODEL TO RADIATION CHEMISTRY OF AQUEOUS SOLUTIONS. J. Phys. Chem. 1969, 73, (6), 1928-1937. 46. Pastina, B.; LaVerne, J. A., Effect of molecular hydrogen on hydrogen peroxide in water radiolysis. J. Phys. Chem. A 2001, 105, (40), 9316-9322. 47. Sanguanmith, S.; Meesungnoen, J.; Muroya, Y.; Lin, M. Z.; Katsumura, Y.; Jay-Gerin, J. P., On the spur lifetime and its temperature dependence in the low linear energy transfer radiolysis of water. Phys. Chem. Chem. Phys. 2012, 14, (48), 16731-16736.

19 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 30

48. Tatarchuk, V. V.; Sergievskaya, A. P.; Korda, T. M.; Druzhinina, I. A.; Zaikovsky, V. I., Kinetic Factors in the Synthesis of Silver Nanoparticles by Reduction of Ag+ with Hydrazine in Reverse Micelles of Triton N-42. Chem. Mater. 2013, 25, (18), 3570-3579. 49. Woehl, T. J.; Park, C.; Evans, J. E.; Arslan, I.; Ristenpart, W. D.; Browning, N. D., Direct Observation of Aggregative Nanoparticle Growth: Kinetic Modeling of the Size Distribution and Growth Rate. Nano Lett. 2014, 14, (1), 373-378. 50. Loh, N. D.; Sen, S.; Bosman, M.; Tan, S. F.; Zhong, J.; Nijhuis, C. A.; Kral, P.; Matsudaira, P.; Mirsaidov, U., Multistep nucleation of nanocrystals in aqueous solution. Nat. Chem. 2017, 9, (1), 77-82. 51. Solubilities of Inorganic and Metal Organic Compounds. Third edition (Seidell, A.). J. Chem. Educ. 1941, 18, (8), 399-399. 52. Smith, B. J.; Parent, L. R.; Overholts, A. C.; Beaucage, P. A.; Bisbey, R. P.; Chavez, A. D.; Hwang, N.; Park, C.; Evans, A. M.; Gianneschi, N. C.; Dichtel, W. R., Colloidal Covalent Organic Frameworks. ACS Cent. Sci. 2017, 3, (1), 58-65. 53. Jungjohann, K. L.; Evans, J. E.; Aguiar, J. A.; Arslan, I.; Browning, N. D., Atomic-Scale Imaging and Spectroscopy for In Situ Liquid Scanning Transmission Electron Microscopy. Microsc. Microanal. 2012, 18, (3), 621-627. 54. Malis, T.; Cheng, S. C.; Egerton, R. F., EELS log-ratio technique for specimen-thickness measurement in the TEM. J. Electron Microsc. Tech. 1988, 8, (2), 193-200.

20 ACS Paragon Plus Environment

Page 21 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Figure Captions Scheme 1. Reduction, oxidation, and scavenging reactions involved in electron beam nanochemistry of silver nanocrystal formation.

Figure 1. Radiolysis simulations of oxidizing and reducing radicals as a function of electron dose rate. Steady state concentrations of species formed in (a) deaerated DI water and (b) deaerated 0.1 M aqueous tertiary-butanol. (c) The ratio of reducing species (aqueous electrons, hydrogen radicals) to oxidizing species (hydroxide radicals, oxygen) as a function of dose rate in deaerated DI water (blue circles) and deaerated 0.1 M tertiary-butanol (red diamonds).

Figure 2. (a) Time lapsed bright field STEM images of silver nanocrystal formation over time. (b)-(c) HRTEM images of silver nanoparticles. (d) Plot of 10 particle trajectories over time showing linear growth rate fits and nucleation induction times. (e) Distribution of growth rates and (f) nucleation induction times for a single LCEM data set. The dashed lines in (e) and (f) denote the median values.

Figure 3. Nanocrystal growth kinetics are explained by oxidizing radicals and spur density. (a) Median growth rate (𝑅) as a function of electron dose rate. The marker size is representative of the magnification used for that experiment. (b) Top: The average spur separation (𝑑𝑠𝑝𝑢𝑟) as a function of beam current and magnification. Bottom: the spur density (𝜌𝑠𝑝𝑢𝑟) as a function of beam current and magnification. (c) Median growth rate follows a power law dependence on the dose rate normalized to the spur density. The power law coefficient, ―1/2, was determined from the power law dependence of the concentration ratio of reducing to oxidizing radiolysis species on dose rate by the radiolysis simulations in Figure 1c.

Figure 4. Nucleation kinetics are explained by interpixel radical diffusion. (a) Median nucleation time as a function of dose rate. (b) The ratio of the interpixel radical diffusion time scale to interpixel electron beam 21 ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 30

flight time as a function of magnification. (c) Median nucleation induction time as a function of the time scale ratio defined in (b).

Figure 5. Schematic showing proposed mechanisms for effects of radiation chemistry and reactant transport on (a) growth and (b) nucleation kinetics. The black is the silicon nitride membrane, below which is the aqueous silver precursor shown in blue. (a) The red spheres are radical spurs with approximate sizes of a couple nanometers. Arrows in (a) denote different chemical reactions, which are labeled and shown in Scheme 1. Significant oxidative back reactions and spur overlap together slows the conversion of silver ions to silver atoms, which leads to slow growth kinetics for low beam current and high magnifications (left). When growth kinetics are fast (high beam current, low magnification), spurs are well separated in space and radical scavengers effectively prevent oxidative back reactions (right). (b) Slow nucleation occurs at low magnification where the STEM beam raster positions are spaced far apart, enabling diffusion of silver atoms away from the window surface and low supersaturation ratio (left). At high magnifications, the STEM beam raster positions are spaced close together, which causes large local supersaturation of silver atoms and rapid nucleation (right).

Figure 6. Reaction kinetic model for silver nanocrystal formation. (a) Exemplary reaction kinetic fits of nanocrystal formation at two different magnifications. (b) Model-derived time course for each species at (b) 100 kx and (c) 150 kx. (d) Fitted growth rate constants as a function of the growth rate scaling law shown in Figure 3c. (e) Fitted nucleation rate constants as a function of the nucleation scaling law shown in Figure 4c. Solid lines are best fits determined by linear least squares fitting.

22 ACS Paragon Plus Environment

Page 23 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Scheme 1. Reduction, oxidation, and scavenging reactions involved in electron beam nanochemistry of silver nanocrystal formation. 113x93mm (300 x 300 DPI)

ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 1. Radiolysis simulations of oxidizing and reducing radicals as a function of electron dose rate. Steady state concentrations of species formed in (a) deaerated DI water and (b) deaerated 0.1 M aqueous tertiarybutanol. (c) The ratio of reducing species (aqueous electrons, hydrogen radicals) to oxidizing species (hydroxide radicals, oxygen) as a function of dose rate in deaerated DI water (blue circles) and deaerated 0.1 M tertiary-butanol (red diamonds). 86x141mm (300 x 300 DPI)

ACS Paragon Plus Environment

Page 24 of 30

Page 25 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Figure 2. (a) Time lapsed bright field STEM images of silver nanocrystal formation over time. (b)-(c) HRTEM images of silver nanoparticles. (d) Plot of 10 particle trajectories over time showing linear growth rate fits and nucleation induction times. (e) Distribution of growth rates and (f) nucleation induction times for a single LCEM data set. The dashed lines in (e) and (f) denote the median values. 187x89mm (300 x 300 DPI)

ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 3. Nanocrystal growth kinetics are explained by oxidizing radicals and spur density. (a) Median growth rate (R ̃) as a function of electron dose rate. The marker size is representative of the magnification used for that experiment. (b) Top: The average spur separation (dspur) as a function of beam current and magnification. Bottom: the spur density (ρspur) as a function of beam current and magnification. (c) Median growth rate follows a power law dependence on the dose rate normalized to the spur density. The power law coefficient, -1/2, was determined from the power law dependence of the concentration ratio of reducing to oxidizing radiolysis species on dose rate by the radiolysis simulations in Figure 1c. 200x58mm (300 x 300 DPI)

ACS Paragon Plus Environment

Page 26 of 30

Page 27 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Figure 4. Nucleation kinetics are explained by interpixel radical diffusion. (a) Median nucleation time as a function of dose rate. (b) The ratio of the interpixel radical diffusion time scale to interpixel electron beam flight time as a function of magnification. (c) Median nucleation induction time as a function of the time scale ratio defined in (b). 52x14mm (300 x 300 DPI)

ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 5. Schematic showing proposed mechanisms for effects of radiation chemistry and reactant transport on (a) growth and (b) nucleation kinetics. The black is the silicon nitride membrane, below which is the aqueous silver precursor shown in blue. (a) The red spheres are radical spurs with approximate sizes of a couple nanometers. Arrows in (a) denote different chemical reactions, which are labeled and shown in Scheme 1. Significant oxidative back reactions and spur overlap together slows the conversion of silver ions to silver atoms, which leads to slow growth kinetics for low beam current and high magnifications (left). When growth kinetics are fast (high beam current, low magnification), spurs are well separated in space and radical scavengers effectively prevent oxidative back reactions (right). (b) Slow nucleation occurs at low magnification where the STEM beam raster positions are spaced far apart, enabling diffusion of silver atoms away from the window surface and low supersaturation ratio (left). At high magnifications, the STEM beam raster positions are spaced close together, which causes large local supersaturation of silver atoms and rapid nucleation (right). 85x73mm (300 x 300 DPI)

ACS Paragon Plus Environment

Page 28 of 30

Page 29 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Chemistry of Materials

Figure 6. Reaction kinetic model for silver nanocrystal formation. (a) Exemplary reaction kinetic fits of nanocrystal formation at two different magnifications. (b) Model-derived time course for each species at (b) 100 kx and (c) 150 kx. (d) Fitted growth rate constants as a function of the growth rate scaling law shown in Figure 3c. (e) Fitted nucleation rate constants as a function of the nucleation scaling law shown in Figure 4c. Solid lines are best fits determined by linear least squares fitting. 172x137mm (300 x 300 DPI)

ACS Paragon Plus Environment

Chemistry of Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

TOC graphic 39x22mm (300 x 300 DPI)

ACS Paragon Plus Environment

Page 30 of 30