Subscriber access provided by UNIV OF WESTERN ONTARIO
Biological and Medical Applications of Materials and Interfaces
Silk Sponges Ornamented with Placenta-Derived Extracellular Matrix Augments Full-thickness Cutaneous Wound Healing by Stimulating Neovascularization and Cellular Migration Arun Prabhu Rameshbabu, Kamakshi Bankoti, Sayanti Datta, Elavarasan Subramani, Anupam Apoorva, Paulomi Ghosh, Priti Prasanna Maity, Padmavati Manchikanti, Koel Chaudhury, and Santanu Dhara ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b19007 • Publication Date (Web): 02 May 2018 Downloaded from http://pubs.acs.org on May 2, 2018
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
1
Silk Sponges Ornamented with Placenta-Derived Extracellular Matrix
2
Augments Full-thickness Cutaneous Wound Healing by Stimulating
3
Neovascularization and Cellular Migration
4 5
Arun Prabhu Rameshbabu¥, Kamakshi Bankoti¥, Sayanti Datta¥, Elavarasan Subramani$,
6
Anupam Apoorva*, Paulomi Ghosh¥, Priti Prasanna Maity¥, Padmavati Manchikantiα, Koel
7
Chaudhury$ and Santanu Dhara¥#
8 9
¥
Biomaterials and Tissue Engineering Laboratory
10
School of Medical Science and Technology
11
Indian Institute of Technology Kharagpur
12
Kharagpur–721302, India
13 14
$
15
Indian Institute of Technology Kharagpur
16
Kharagpur–721302, India
School of Medical Science and Technology
17 18
*School of Bio Science
19
Indian Institute of Technology Kharagpur
20
Kharagpur–721302, India
21 22
α
23
Indian Institute of Technology Kharagpur
24
Kharagpur–721302, India
School of Energy Science & Engineering
25 26
#corresponding author
27
Dr. Santanu Dhara
28
E-mail:
[email protected] 29
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
30
Abstract
31
Regeneration of full-thickness wound without scar formation is a multifaceted process which
32
depends on in situ dynamic interactions between the tissue-engineered skin substitutes and
33
newly formed reparative tissue. However, the majority of the tissue-engineered skin
34
substitutes used so far in full-thickness wound healing cannot mimic the natural extracellular
35
matrix (ECM) complexity and thus are incapable of providing a suitable niche for
36
endogenous tissue repair. Herein, we demonstrated a simple approach to fabricate porous
37
Hybrid Extracellular Matrix Sponges (HEMS) using Placental Extracellular Matrix (pECM)
38
and Silk Fibroin (SF) for full-thickness wound healing. HEMS with retained
39
cytokines/growth factors provided a non-cytotoxic environment in vitro for Human Foreskin
40
Fibroblasts (HFFs), Human Epidermal Keratinocytes (HEKs) and Human Amniotic
41
Membrane-derived Stem Cells (HAMSCs) to adhere, infiltrate and proliferate. Interestingly,
42
HEMS-conditioned media accelerated the migration of HFFs & HEKs owing to the presence
43
of cytokines/growth factors. Also, HEMS ex-vivo Chick Chorioallantoic Membrane (CAM)
44
assay demonstrated its excellent vascularization potential by inducing and supporting blood
45
vessels. Additionally, HEMS when subcutaneously implanted demonstrated no severe
46
immune response to the host. Furthermore, HEMS implanted in full-thickness wounds in a rat
47
model showed augmented healing progression with well-organized epidermal-dermal
48
junctions via pronounced angiogenesis, accelerated HFFs/HEKs migration, enhanced
49
granulation tissue formation and early re-epithelialization. Taken together, these findings
50
show that porous HEMS ornamented with cytokines/growth factors having superior
51
physicomechanical properties may be an appropriate skin substitute for full-thickness
52
cutaneous wounds.
53
ACS Paragon Plus Environment
Page 2 of 52
Page 3 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
54
Keywords: Extracellular Matrix; Silk Fibroin; Cytokine/Growth Factor; Neovascularization;
55
Cellular Migration; Full-thickness Wound Healing.
56
1. Introduction
57
Skin is the largest organ of the human body that serves the onerous function of providing
58
a physical shield against microorganisms, thermal regulation for average hydration retention,
59
sensory information about the external environment, and other vital functions.1 Skin injuries
60
can be caused by genetic disorders, acute trauma, chronic wounds, or by complex surgeries.2
61
In complex full-thickness wounds, epidermal layer along with dermal layer, sweat glands,
62
hair follicles as well as the underlying subcutaneous fat tissue is damaged. Specifically,
63
wounds of critical size hamper the crucial functions of the skin and can lead to complications
64
such as microbial infection, a water-electrolyte imbalance in the body and severe cases that
65
can be life-threatening.3 Therefore, skin injuries of critical size (greater than 1 cm in
66
diameter) require bioactive support with clinical intervention to accelerate healing.4 Also,
67
scarless wound healing is desirable for regaining tissue functionality as well as improved
68
aesthetics. The gold standard treatment for full-thickness skin injuries is the autologous skin
69
grafting.5 However, the limitations such as donor site morbidity and limited donor site
70
availability have resulted in the need for the development of skin substitutes. In this context,
71
bioengineered skin substitutes (hydrogels,6 sponges,7 and electrospun mats8) from natural
72
polymers and proteins can solve the problem of autologous donor graft shortage, provide
73
protection from fluid loss and contamination as well as can deliver bioactive factors such as
74
cytokines, dermal matrix components, and growth factors to the wound bed for enhancing the
75
host wound healing responses.4,9
76
Silk fibroin (SF) from Bombyx mori, a versatile natural fibrous protein has been
77
extensively explored as a skin substitute material in tissue engineering application owing to
78
its biocompatibility, slow degradability, low immunogenicity, remarkable mechanical
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 4 of 52
79
properties, and hemostatic action.10-12 However, SF alone is inadequate for dermal tissue
80
regeneration since it lacks adequate cell-specific binding sites and limited growth factor
81
adsorbing capacity.13 Thus, to enhance the properties of SF, it has been blended with various
82
natural macromolecules such as gelatin,14 hyaluronic acid,15 collagen,16 chitosan,17 etc. For
83
instance, scaffold fabricated from SF/elastin facilitated accelerated re-epithelialization in burn
84
wounds.18 In another study, blend scaffold of SF/keratin significantly enhanced the cell
85
adhesion/proliferation of L929 fibroblasts and increased extracellular matrix (ECM)
86
deposition of collagen type I.19 Though the scaffolds mentioned above displayed superior
87
cellular activities and ECM deposition, yet they lack a plethora of structural proteins, growth
88
factors, and cytokines required for skin regeneration.
89
In recent years, decellularized Extracellular Matrix (dECM) has emerged as an attractive
90
biomaterial in regenerative medicine which provides abundant biological cues for cell
91
migration, proliferation and further directing/promoting differentiation.20 The human placenta
92
is a unique, complex organ that serves multiple functions to the developing fetus; also, it is a
93
rich reservoir for a variety of growth factors and cytokines such as epidermal growth factor
94
(EGF), transforming growth factor-β (TGF- β), fibroblast growth factor (FGF), platelet-
95
derived growth factor (PDGF), and vascular endothelial growth factor (VEGF), etc.21 These
96
growth
97
migration/proliferation,
98
neovascularization that are considered essential for tissue repair and regeneration in the early
99
stage of wound healing. Direct administration of human placental extract in the wound
100
margin of full thickness wounds was found to accelerate the wound healing mechanism
101
associated with an increase in TGF- β levels during the initial phase resulting in increased
102
inflammatory cell infiltration, and increased VEGF levels during the later stages leading to
103
increased new blood vessel formation.22 Furthermore, the properties of the placenta, such as
factors/cytokines
play
an
mesenchymal
essential stem
cells
role
in
homing,
ACS Paragon Plus Environment
fibroblasts/keratinocytes re-epithelialization,
and
Page 5 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
104
low immunogenicity, anti-inflammatory, anti-scarring make it an ideal choice to treat full-
105
thickness skin wound.23
106
In the present work, a Hybrid Extracellular Matrix Sponges (HEMS) was fabricated for
107
skin tissue engineering by incorporating placenta-derived Extracellular Matrix (pECM) with
108
SF; thus bringing together the inherent advantages of both SF and pECM. Collagen (major
109
ECM component of native skin) is considered to be the promising material of choice for
110
wound healing application owing to its biodegradability, superior biocompatibility, low
111
antigenicity, non-toxic upon exogenous application, and high tensile strength. Therefore,
112
collagen was selected as a representative control to demonstrate the superiority of pECM
113
containing intrinsic cytokines/growth factors for wound healing. Hence, collagen
114
incorporated SF Matrix sponges (CIMS) was also fabricated for comparative studies. The
115
fabricated HEMS and CIMS were characterized for their physicomechanical properties and
116
evaluated for their biocompatibility using the primary fibroblasts, keratinocytes, and
117
HAMSCs. In vitro wound healing/migration potential was evaluated by scratch assay and the
118
ability to induce vascularization was assessed using Chick Chorioallantoic Membrane (CAM)
119
model. Also, HEMS and CIMS were implanted subcutaneously in rats to study the host
120
immune reaction/toxicity in vivo. Further, HEMS and CIMS were assessed for their potential
121
in accelerating full-thickness wound healing using a rat model.
122
2. Materials and Methods
123 124
2.1. Decellularization of Human Placenta and Processing of Soluble Extracellular Matrix (pECM)
125
All the experimental procedures were approved by the Institutional Ethical Committee
126
of Indian Institute of Technology, Kharagpur, India. Decellularization of human placenta was
127
performed according to the protocol reported in our previous work.24 Briefly, the collected
128
placentas were repeatedly washed with Dulbecco's phosphate-buffered saline (DPBS) until
129
the blood was removed and then minced into small fragments by using a sterile scalpel. The
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
130
minced placenta was decellularized using 0.5% sodium dodecyl sulfate (SDS; Sigma-Aldrich,
131
USA) with 0.2% DNase (2000 U; Sigma-Aldrich, USA), 200mg/ml RNase (Sigma-Aldrich,
132
USA), 0.05% trypsin/EDTA (Gibco, USA), 100 U/ml penicillin, 100 mg/ml streptomycin
133
(Gibco, USA) and 1 mM phenyl methyl sulfonyl fluoride (Sigma-Aldrich, USA) in a sealed
134
rotating vessel. The procedure was conducted under strictly sterile conditions, and the
135
solution was changed every 24 h to prevent tissue degradation and contamination. The
136
decellularized placentas were washed with PBS and stored at -80 °C for further processing.
137
Solubilisation of extracellular matrix was performed as described elsewhere.25
138
Briefly, the decellularized human placenta was pulverized to a powder using tissue
139
homogenizer in the presence of liquid nitrogen. The resulting powder was immersed and
140
stirred in a 4 M urea buffer (240 g urea, 9 g NaCl, and 6 g Tris base in 1 L distilled water)
141
containing protease inhibitor cocktail for 24 h. Subsequently, the samples were subjected to
142
ultrasonic homogenization (Branson Ultrasonics, USA) in an ice bath. After centrifuging the
143
samples at 14000 rpm for 20 min at 4 °C, the supernatant was collected and then dialyzed
144
using 8000 MWCO dialysis tubing against Tris-buffered saline (TBS), i.e., 9 g NaCl and 6 g
145
Tris base in 1 L distilled water to remove urea. The contents of the dialysis tubes were
146
centrifuged again to remove protein aggregates, and then the supernatant was frozen at -80 °C
147
followed by freeze-drying for 42 h and pulverized to obtain pECM.
148
2.2. Collagen and GAGs Quantification
149
The total collagen content by hydroxyproline assay and sGAGs content was assessed
150
by alcian blue assay26 in native placenta (NP) and pECM as detailed in Supporting
151
Information S1.
152
2.3. Cytokine Array for Detection of Growth Factors
ACS Paragon Plus Environment
Page 6 of 52
Page 7 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
153
Growth factors in NP and pECM were analyzed using a human cytokine antibody
154
array (RayBio® C-Series C1000, USA) following the manufacturer’s protocol. Briefly, the
155
samples were dissolved at 4 °C for 36 h in the buffer containing 0.1X protease inhibitor, 2 M
156
urea, and 50 mM Tris-HCl. The supernatant was collected by centrifugation at 4 °C. The
157
obtained supernatant was incubated onto an array chip containing 120 different human
158
cytokine antibodies after blocking. The chip was then washed and incubated with biotinylated
159
antibody cocktail. Subsequently, the signals were detected using a chemiluminescence
160
detection system after HRP-Streptavidin incubation and washing.
161
2.4. SDS-PAGE & Western Blotting
162
The finely powdered NP and pECM were obtained by homogenizing in a buffer
163
containing 65 mM DTT, 4 M guanidine HCl, protease inhibitor cocktail, 10 mM EDTA and
164
50 mM sodium acetate (all Sigma-Aldrich, USA). The resulting mixture was exposed to
165
ultrasonic homogenization, and the supernatant was collected after centrifugation (13000 rpm
166
for 20 min at 4 °C). Bicinchoninic acid assay kit (Thermo Scientific, Rockford, USA) was
167
used to quantify the total protein concentration of the homogenates according to the
168
manufacturer’s instruction. The extracted proteins from NP and pECM were run in 10 %
169
PAGE and stained with Coomassie blue after fixing.
170
The extracted proteins (40 µg) from NP and pECM after resolving in SDS-PAGE was
171
transferred onto the nitrocellulose membrane (Millipore, USA) at 90 V for 2 h in the presence
172
of a Tris-glycine buffer. The nitrocellulose membranes containing the transferred proteins
173
were treated with a primary antibody [Hepatocyte growth factor (HGF; Santa Cruz, USA),
174
TGF-β1 (Abcam, USA), VEGFA (Abcam, USA), EGF (Santa Cruz, USA), Insulin-like
175
growth factor-1 (IGF-1; Santa Cruz, USA) and PDGF-B (Santa Cruz, USA)] at 4 °C
176
overnight after blocking. The blots were subsequently incubated with HRP-conjugated
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
177
secondary antibody for 1 h. Pierce ECL-western blotting substrate kit (Thermo Scientific,
178
USA) was used for visualizing the immunoreactive proteins according to the manufacturer’s
179
instructions. Further, an automatic x-ray film processor was used to develop the images,
180
which were analyzed by ImageJ software (Rasband WS; NIH).
181
2.5. Preparation of Silk Fibroin (SF) Solution
182
Silk fibroin solution was prepared according to the procedure described elsewhere.27
183
Briefly, Bombyx mori cocoons were chopped into small pieces and boiled (98 °C) for 30 min
184
in an alkaline bath containing 0.02 M sodium carbonate (Sigma-Aldrich, USA) to obtain
185
fibroin and to remove the sericin/glycoproteins. The degummed silk was rinsed thoroughly
186
with double distilled water and allowed to dry at room temperature overnight. The extracted
187
fibroin was dissolved in 9.3 M LiBr (Sigma-Aldrich, USA) solution at 60 °C for 4 h followed
188
by dialysis for 72 hours against double distilled water using a dialysis membrane (3500
189
MWCO) to remove LiBr. The obtained fibroin solution was centrifuged (9,000 rpm at 4 °C
190
for 20 min) to remove large aggregates and the supernatant concentrated to a final
191
concentration of 10 % w/v by dialysis against polyethylene glycol (10,000 MW, Sigma-
192
Aldrich, USA). The concentrated fibroin solution was filtrated through a 5 µm syringe filter
193
(Millipore) to eliminate minor impurities.
194
2.6. Fabrication of Collagen Incorporated SF Matrix Sponges (CIMS) and Hybrid
195
Extracellular Matrix Sponges (HEMS)
196
Collagen type I was extracted from fish scales according to the procedure described
197
elsewhere28 and was grounded to powder in the presence of liquid nitrogen. Fibroin solution
198
and pECM was obtained as described above. For fabrication of CIMS/HEMS, 0.25 g of
199
pulverized collagen type I/pECM respectively was dispersed in 5 ml of 10 % w/v SF solution
200
under constant stirring for 24 h at 4 °C. The homogeneously mixed viscous solution was
ACS Paragon Plus Environment
Page 8 of 52
Page 9 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
201
subjected to sonication in an ice bath for 2 min, gently poured into sterile moulds, frozen at -
202
80 °C and subsequently lyophilized for 72 h to obtain CIMS/HEMS. The lyophilized
203
CIMS/HEMS were soaked in 70% (v/v) ethanol for 6 h to induce β-sheets formation in SF
204
protein. Homogeneous distribution of pECM or collagen in SF matrix was assessed by
205
Masson’s Trichrome (MT) staining as described in Supporting Information S3.
206
2.7. Morphological Analysis by Scanning Electron Microscopy
207
The microstructure of CIMS/HEMS was examined under scanning electron
208
microscope (EVO ZEISS, Carl Zeiss SMT AG, Oberkochen, Germany) at an accelerating
209
voltage of 10-20 kV after fixing the samples with 4% paraformaldehyde. Briefly, the dried
210
samples were placed on a sample holder using double-sided adhesive tapes and gold coated
211
for 90 s using plasma coater under high vacuum to avoid charging effect.
212
2.8. Porosity Measurement by Micro-Computed Tomography (Micro-CT)
213
CIMS/HEMS were scanned (1000 scan slices/sample) using a micro-CT (GE Phoenix
214
v|tom|ex s, Germany) at a voltage of 155 kV, current 45 mA with a voxel of 7.2 microns.
215
When analyzing the porosity of the samples, the threshold to be used was obtained for each
216
specimen by the threshold histogram offered by the VG Studio Max software (Volume
217
Graphics Germany).
218
2.9. Swelling Behaviour and Degradation Kinetics
219
The swelling behavior of CIMS and HEMS was examined for 64 h at 37 °C in sterile
220
PBS (pH 7.4). At predetermined time intervals, the excess PBS in samples was removed by
221
gently wiping with filter paper and then instantly weighed in electronic balance (Mettler-
222
Toledo International Inc., USA) to calculate the PBS content in swollen CIMS/HEMS.
223
Swelling ratio was calculated using the formula below:
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Swelling ratio (%) =
224
× 100
225
Where Td and Ts are the dry and wet weight of CIMS/HEMS respectively. The experiments
226
were conducted in triplicate and averaged.
227
In vitro degradation of CIMS/HEMS (n=5) was performed in PBS containing 1U/ml
228
of lysozyme (hen egg-white, Sigma-Aldrich), pH 7.4 at 37 °C for a specified period
229
according to the protocol described in our previous publication.29
230
2.10. Fourier Transform Infrared (FTIR) Spectroscopy
231
Infrared spectra of CIMS and HEMS were obtained using a Thermo Nicolet
232
Spectrophotometer (Model NEXUS-870; Thermo Nicolet Corporation, Madison, WI) in ATR
233
mode. The absorbance of spectra was recorded in the range of 4000 to 500 cm-1.
234
2.11. Mechanical Testing
235
The mechanical properties of the samples (n=10) were determined by tensile testing
236
using the universal testing machine (25 K, Hounsfield, UK) at room temperature with 20 N
237
load cell. The samples were cut into rectangular strip (~ 5 mm width, ~ 20 mm length,
238
~ 1 mm thickness) and soaked in PBS for 48 h. Uniaxial tensile testing was performed under
239
tension at a crosshead speed of 2 mm/min.
240
2.12. Isolation of Human Amniotic Mesenchymal Stem Cells (HAMSCs)/Human
241
Foreskin Fibroblast (HFF)/ Human Epidermal Keratinocytes (HEK)
242
HAMSCs were isolated and characterized according to the protocol reported in our
243
previous publication.24 Briefly, the human placentas collected under stringent sterile
244
conditions were transported to the laboratory at 4 °C. The blood components were removed
245
by rinsing with Hank's Balanced Salt Solution (Gibco, USA) containing 200 mg/ml
246
streptomycin and 200 U/ml penicillin. The amniotic membrane was detached from chorion
ACS Paragon Plus Environment
Page 10 of 52
Page 11 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
247
by a blunt dissection and was incubated with 0.05 % trypsin–EDTA solution (Gibco, USA)
248
for two cycles of 30 min each, followed by discarding the supernatant. Subsequently, the
249
tissue was digested with Earle's Balanced Salt Solution (Gibco, USA) containing 2 mg/ml
250
collagenase Type IV (Gibco, USA) and 10 U/ml DNase I (Sigma-Aldrich, USA) for 60 min.
251
After the end of the digestion, the suspension was centrifuged at 1500 rpm to collect the cell
252
pellet. The cell pellet was seeded in flasks (Nunc, USA) after suspending it in DMEM
253
medium (containing low glucose, 10% FBS, 1% Antibiotic-Antimycotic) and transferred to
254
an incubator. TrypLE™ Express Enzyme (Gibco, USA) was used to sub-passage the cells
255
and cells before passage number five were used for experiments.
256
HFFs and HEKs were isolated as described elsewhere from circumcised human
257
foreskin.30 Briefly, skin samples were collected in sterile containers and rinsed in PBS
258
containing 200 mg/ml streptomycin and 200 U/ml penicillin. Later, the samples were
259
chopped into small pieces and incubated in Dispase II (Sigma-Aldrich, USA) for overnight at
260
4 °C. Subsequently, epidermal and dermal layers were separated and incubated in TrypLE™
261
Express Enzyme/collagenase I (Gibco, USA), respectively for further digestion. The
262
corresponding cell suspension was strained and the cell pellet was obtained by centrifugation.
263
Defined Keratinocyte-SFM media (Gibco, USA)/DMEM high glucose media (Gibco, USA)
264
were used for culturing HEK/HFF respectively. Cells after reaching 80% confluency were
265
passaged with TrypLE™ Express and cells before passage five were used for further
266
experiments.
267
2.13. Indirect Cytotoxicity Testing
268
2.13.1. Preparation of HEMS/CIMS Conditioned Medium
269
HEMS/CIMS in the presence of liquid nitrogen was grounded to a fine powder with a
270
sterile porcelain mortar and pestle. The resulting HEMS/CIMS powder (25 mg/ml) was
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
271
added to a complete DMEM/Defined Keratinocyte-SFM medium with 1% Antibiotic-
272
Antimycotic in a sterile container and stirred inside an incubator at 37 °C and 5 % CO2 for 24
273
h. Conditioning material was removed from the media by filtering the medium through a 0.22
274
µm syringe filter (Millipore, USA).
275
276
2.13.2. Morphological and Apoptosis Assessment
277
Primary HFFs and HEKs were used for investigating the effect of CIMS/HEMS
278
conditioning medium on their morphological and functional attributes. Briefly, HFFs/HEKs
279
were cultured either with CIMS/HEMS-conditioned or normal medium on lysine coated
280
coverslips placed in a 12-well plate. The coverslips were removed after 96 h, stained with
281
Rhodamine phalloidin (Invitrogen, USA) and DAPI (Invitrogen, USA) according to the
282
manufacturer’s instructions. Apoptosis of HEKs in the presence of CIMS/HEMS-conditioned
283
media was also investigated after 7 days of cultivation using the DeadEnd Fluorometric
284
TUNEL system (Promega, USA) according to the manufacturer’s guidelines.
285
2.13.3. Scratch Assay
286
Scratch assay for wound healing was performed according to the protocol described
287
elsewhere.31 HFFs/HEKs were cultured in 35 mm Petri dishes (Tarsons, India) in
288
DMEM/Defined Keratinocyte-SFM medium at 37 °C in a 5% CO2 in an air atmosphere to
289
produce confluent monolayers. To mimic wounds, a vertical scratch was made in the center
290
of the monolayer HFFs/HEKs using a sterile 200 µl pipette tip, and subsequently, the Petri
291
dishes were washed with sterile PBS to remove the detached HFFs/HEKs. Later, the Petri
292
dishes were filled with either CIMS/HEMS-conditioned medium or control medium, and the
293
Petri dishes were incubated at 37 °C in a 5 % CO2 for 72 h. The migration of HFFs/HEKs in
294
the denuded path was monitored by taking optical images using an inverted phase contrast
295
microscope (Carl Zeiss AxioObserver) at the different period, and three independent
ACS Paragon Plus Environment
Page 12 of 52
Page 13 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
296
observers counted the number of cells that had migrated into the initially cell-free scratch
297
area.
298
2.14. Analysis of HEMS Conditioned Medium by ELISA
299
The quantitative direct enzyme immunoassay was performed to estimate the levels of
300
Interleukin-6 (IL-6), Interleukin-8 (IL-8), monocyte chemotactic protein-1 (MCP-1), TGF-β1
301
and RANTES in HEMS conditioned medium. The protein concentration of 20 µg/ml was
302
used for antigen binding in poly-L-lysine coated 96-well plates. Following blocking with 3%
303
BSA, wells were incubated with antibodies against IL-6, IL-8, MCP-1, TGF-β1 and
304
RANTES (Santa Cruz Biotechnology, Inc., USA). All wells were washed with PBST and
305
incubated with a suitable secondary antibody conjugated with HRP (Santa Cruz
306
Biotechnology, Inc. CA, USA). After washing with PBST, 100 µl of Femto-ELISA-HRP
307
substrate (G-Biosciences, USA) was added to each well and incubated for 10-15 min. The
308
reaction was stopped with 1N HCl and absorbance was measured at 450 nm.
309
2.15. Direct Cytotoxicity Testing
310
Cytotoxicity was tested by the direct cultivation of HAMSCs/HEKs/HFFs on TCP/
311
CIMS/HEMS. Briefly, 5 x 104 HAMSCs/HFFs/HEKs were seeded on samples (n=5) and
312
cultivated in a 24-well tissue culture plates for 72 h. The number of viable cells was
313
calculated using Vybrants MTT Cell Proliferation Assay Kit (Invitrogen, USA) according to
314
the manufacturer’s instructions.
315
The viability of HEKs seeded on CIMS and HEMS were assessed using Live/Dead
316
Assay Kit (Life Technologies, NY) according to the manufacturer’s protocol. Briefly, cell-
317
seeded CIMS/HEMS after 7 days were incubated for 60 min at 37 °C in a solution containing
318
2 µM calceinacetomethoxy (AM) and 4 µM ethidium homodimer. The samples were
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
319
repeatedly washed with DPBS to avoid background staining and visualized under an inverted
320
fluorescence microscope (AxioVision, Zeiss, Germany).
321
2.16. Chick Chorioallantoic Membrane (CAM) Assay
322
CAM assay was used as an ex vivo model to assess the potential of CIMS/HEMS to
323
induce vascularization. In this study, fertilized white Leghorn chicken eggs were used for
324
CAM assay by following the procedure described elsewhere.32 Briefly, the eggs were
325
incubated at 37 °C, 65% relative humidity egg incubator. On day 5, disks (5 mm diameter;
326
n=5) of CIMS and HEMS were punched, sterilized and hydrated with sterile PBS overnight.
327
The sterile disk of CIMS and HEMS was placed over CAM respectively; later the eggshell
328
was sealed. On day 8, the window was carefully dissected, and CIMS/HEMS were
329
photographed in situ. Three blind observers counted the number of blood vessels approaching
330
towards the scaffolds. Further, the CIMS/HEMS along with surrounding membrane were
331
retrieved carefully with forceps without getting tore off, fixed in 4 % paraformaldehyde,
332
dehydrated and subsequently embedded in paraffin blocks. The paraffin blocks were
333
sectioned and stained with hematoxylin and eosin (H & E; Sigma-Aldrich, USA), Masson's
334
trichrome (MT; Sigma-Aldrich, USA) and DAPI.
335
2.17. In vivo CIMS/HEMS Cellular Response and Organ Toxicity Analysis
336
In vivo cellular response of CIMS/HEMS was studied by subcutaneous implantation
337
in albino Wistar rats (250 ± 10 g; Males; n=5). The experimental protocol followed was
338
permitted by the Institutional Ethical Committee of Indian Institute of Technology
339
Kharagpur, and all surgery was performed under anesthesia. Extreme caution was taken to
340
minimize suffering to the animals. Cylindrical CIMS/HEMS (diameter = ~1 cm; height =
341
~0.5 cm) were implanted on the dorsal side of rats after dissection and sutured using chromic
342
catgut under aseptic condition. After 28 days of implantation, rats were euthanized, and the
ACS Paragon Plus Environment
Page 14 of 52
Page 15 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
343
site of implantation along with the adjacent tissue was retrieved for further analysis. The
344
harvested samples were fixed, dehydrated and subsequently embedded in paraffin blocks.
345
The paraffin blocks containing sample were microtomed, and the sections were then stained
346
with H&E, MT, toluidine blue (TB; Sigma-Aldrich, USA) and anti-CD31 antibody (Abcam)
347
staining according to the manufacturer’s instructions. All the sections were observed under a
348
microscope to understand the cellular events. For organ toxicity analyses, the major organs
349
(Heart, Kidney, Lung, and Liver) were harvested (n=3 per group) after 28 days of the
350
treatment period of different groups and processed for histological assessment of the tissue.
351
352
2.18. Full-thickness Cutaneous Wound Healing Study
353
The in vivo experimental protocols were approved by the Institutional Ethical
354
Committee of Indian Institute of Technology Kharagpur. Albino Wistar rats (2 months old;
355
200 ± 10 g) were used to evaluate the full-thickness skin wound healing capacity of the
356
different groups. Randomly, the rats were divided into three groups (n=9 each group)
357
according to the treatments received on each rat. Three treatment groups were as follows (1)
358
SHAM: wounds that were left untreated; (2) CIMS and (3) HEMS were applied into the
359
wound exclusively within the wound area. Before surgery, 2 cm diameter wounds were
360
marked using a template, and standardized full-thickness skin wounds were made on dorsal
361
side by excising to the level of the fascia, by using sterile forceps and scissors under general
362
anesthesia. Petrolatum gauze pressure dressing was applied to all the groups, which prevented
363
the samples from moving away from the wound bed. Care was taken to ensure that the
364
pressure dressing was not detached during the twenty-one day treatment period. The rats were
365
individually housed in temperature-controlled cabins and fed with a standard protein diet.
366
The cutaneous wounds were photographed after 0, 7, 14, and 21 days and the unhealed area
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 16 of 52
367
was measured using ImageJ (Rasband WS; NIH) to assess the wound healing kinetics. The
368
percentage of wound reduction was calculated according to the following formula: Rate of Wound Closure =
369
370 371
× 100
Where, A0 and At are designated to initial wound area and wound area at the designated time, respectively.
372
Rats were sacrificed after 7, 14, 21 days post-implantation, and the wound site with
373
the surrounding muscle & skin was retrieved. They were then immediately fixed with 4%
374
formaldehyde, dehydrated and embedded in a paraffin block. Sections of 3 µm thickness
375
were cut and stained with H & E and MT. Further, the sections were also immune-stained
376
with anti-CD31 and anti-cytokeratin 10 (CK-10; Abcam, USA) according to the
377
manufacturer’s instruction. Photomicrograph of different stains was captured and examined
378
to document cardinal features like an inflammatory response, necrosis, neovascularization,
379
collagen deposition, granulation, and re-epithelialization to understand healing progression at
380
different periods.
381
2.19. Reverse Transcriptase-PCR (RT-PCR) Analyses of the Wound Area
382
RT-PCR was performed on newly formed tissue in the wound area from different
383
treatment groups, 21 days post-surgery. The regenerated tissues (n=5 per group) from
384
different study groups were excised from the animal after sacrificing and ground to a powder
385
using liquid nitrogen. The total RNA was extracted using TRIzol reagent (Invitrogen, USA)
386
according to the manufacturer’s instructions. An equal quantity of isolated RNA was
387
transcribed into cDNA using a cDNA synthesis kit (Thermo Scientific, USA) according to
388
the manufacturer’s protocol. PCR amplification of the gene-specific primers (Supporting
389
Information Table S1) was performed in a thermal cycler (Eppendorf Mastercycler, USA)
ACS Paragon Plus Environment
Page 17 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
390
and the PCR product was imaged in UV gel doc (Bio-Rad, USA) after running it in 1%
391
agarose gels. The band intensity was analyzed using ImageJ (Rasband WS; NIH).
392
2.20. Statistical Analysis
393
The data were analyzed using GraphPad Prism software (version 5.02, La Jolla, CA,
394
USA) by one-way ANOVA, Tukey's multiple comparison tests. The level of significance was
395
determined as P < 0.05 significance. Experiments were repeated in triplicates and data were
396
represented as mean ± standard deviation (SD) for n=3 unless mentioned.
397
398
399
3. Results
400
3.1. Biochemical Characterization of Soluble Placenta Extracellular Matrix (pECM)
401
The native placenta (NP) was subjected to decellularization using a combinatorial
402
treatment involving homogenization, centrifugation, SDS, and nucleases. For the preparation
403
of soluble placenta extracellular matrix proteins (pECM), the ECM from the decellularized
404
placenta was solubilized using urea. To estimate the biochemical preservation in pECM after
405
the decellularization and the solubilization process, pECM was quantified for major ECM
406
components such as collagen and sGAG. As observed in Supporting Information (Figure S1),
407
retention of collagen (409.8 ± 45.44 µg mg-1) and sGAG (38.45 ± 7.42 µg mg-1) in pECM
408
after the decellularization and solubilization process, was not significantly (P > 0.05)
409
different from the collagen (460.4 ± 18.622 µg mg-1) and sGAG ( 53.59 ± 14.41 µg mg-1)
410
content of NP. These results demonstrated that the major ECM components were sufficiently
411
retained in pECM after the decellularization and solubilization process which will make it an
412
ideal matrix for tissue engineering application.
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
413
3.2. Cytokine Array for Detection of Growth Factors
414
pECM and NP were arrayed on a glass chip containing 120 different cytokine
415
antibodies for detection of the retained endogenous cytokines. As shown in Figure 1, 84
416
cytokines were readily detected in pECM, and the remaining 36 cytokines were not detected,
417
which may be due to the sensitivity limitations of the array. Among the 84 detected bioactive
418
molecules, cytokines [EGF, IGF-1, PDGF-B, HGF, VEGFA, TGF-β1, and FGF] which are
419
considered critical for regulating the angiogenesis and skin wound healing were detected at
420
high levels. Also, growth factors such as IL-6, IL-8, MCP-1, and RANTES; which are
421
reported to accelerate fibroblast and keratinocyte migration and proliferation was also
422
detected in pECM.
423
3.3. SDS PAGE and Western Blotting of NP and pECM
424
SDS-PAGE was used to investigate the proteins retained in pECM. Figure 2A reveals
425
some bands at lower molecular weights signifying the presence of various proteins/peptides
426
in the pECM, which demonstrates the complexity of the pECM. Western blotting was
427
performed to confirm the presence of endogenous bioactive molecules which are known to
428
regulate blood vessel formation and skin regeneration. Figure 2B reveals the presence of
429
retained growth factors such as EGF, IGF-1, PDGF-B, HGF, VEGFA, and TGF-β1 after the
430
decellularization and solubilization process in pECM. From Figure 2C, no significant
431
difference (P > 0.05) was observed in the levels of EGF, PDGF-B, TGF-β1, and VEGFA in
432
pECM compared to the NP. However, a significant decrease (P < 0.05) was observed in the
433
levels of IGF-1 and HGF in pECM compared to NP (Figure 2C).
434
3.4. Physicochemical Characterization of Scaffolds
435
In this study, collagen I/pECM was blended with SF in aqueous environment and
436
successfully fabricated into CIMS/HEMS respectively by molding and freeze-drying process.
ACS Paragon Plus Environment
Page 18 of 52
Page 19 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
437
The SEM microstructure of CIMS and HEMS are shown in Figure 3A and C which revealed
438
a high degree of interconnected heterogeneous porous structures within the matrices. The
439
porosity of the samples analyzed by Micro-CT was approximately similar for CIMS (85.27
440
%) and HEMS (90.2%) as shown in Figure 3B and D. The swelling behavior of the scaffolds
441
is critical not only for arbitrating the rate of nutrition and waste transport within the scaffolds
442
in situ but it also helps in biological fixation to the wound bed. As observed in Figure 4A,
443
CIMS and HEMS demonstrated 55% and 64% swelling respectively when exposed to PBS
444
for 0.5 h due to the rapid uptake of water. After this time; it attained a plateau and no further
445
increase in mass was observed until 64 h. Extended long-term swelling observations are
446
essential for more critical assessment. As shown in Figure 4B, CIMS (mass loss 97%)
447
exhibited faster degradation as compared to HEMS (mass loss 90%) when incubated in
448
lysozyme at 37 °C for 16 days. Also, CIMS and HEMS when incubated in PBS (pH 7.4)
449
without lysozyme for 48 h showed a negligible mass loss (data not shown) and displayed a
450
wet tensile strength of 0.065 ± 0.004 MPa and 0.076 ± 0.003 MPa (P > 0.05; Figure 4D).
451
Infrared absorption spectra (Figure 4C) of CIMS and HEMS showed characteristic
452
absorption peaks assigned to the peptide bonds (–CONH–) that give rise to amide I (1600–
453
1700 cm1), amide II (1520–1540 cm1), and amide III (1220–1300 cm1) signature peaks. Pure
454
silk scaffolds showed amide I, amide II and amide III bands at 1617 cm-1, 1511 cm-1, and
455
1226 cm-1; CIMS scaffolds showed amide I, amide II and amide III bands at 1636 cm-1, 1528
456
cm-1, and 1226 cm-1 whereas HEMS scaffolds showed the characteristic peaks of amide I,
457
amide II and amide III bands at 1623 cm-1, 1533 cm-1, and 1222 cm-1. Also in CIMS and
458
HEMS peak at 2869-1 corresponds to C-H symmetric stretching. Notably, in CIMS the 1636
459
cm–1 band is characteristic of the triple helix of native collagen, and thus suggests the
460
existence of collagen in the native triple helical structures in the CIMS scaffold.
461
3.5. Indirect Cytotoxicity Testing for CIMS and HEMS
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
462
3.5.1. Morphological and Apoptosis Assessment
463
HFFs and HEKs were cultivated on lysine coated coverslips with either CIMS/HEMS
464
conditioning medium or control medium for 96 h. As shown in Figure 5A, HFFs/HEKs
465
grown in HEMS-conditioned medium proliferated rapidly and were able to make intermittent
466
contact via cellular protrusions and extensions with well-spread cytoskeletons compared to
467
those of HFFs/HEKs cultured in CIMS-conditioned/control medium. Also, there was no
468
difference in the morphology of HFFs/HEKs cultured in the CIMS-conditioned medium
469
compared with the cells cultured in control medium. These observations demonstrated that
470
CIMS/HEMS did not release cytotoxic substances.
471
TUNEL assay was performed to detect apoptosis after 7 days of HEKs cultivation
472
either in control or CIMS/HEMS-conditioned medium. As shown in Figure 5B, no significant
473
apoptotic HEKs was observed in control or CIMS/HEMS-conditioned medium treated
474
groups; indicating that the CIMS/HEMS-conditioned medium had no detrimental effect on
475
cells.
476
3.5.2. Scratch Assay HFFs started to migrate from the edges of the denuded/wounded areas within 6 h
477 478
while
HEKs migration was witnessed after 12 h in both the treatment (CIMS/HEMS-
479
conditioned medium) and control groups (Figure 6A and B). As determined by three
480
independent observers, the number of HFFs that migrated into the scratch areas for HEMS-
481
conditioned, CIMS-conditioned, and control group were found to be (6 h): 134 ± 06, 86 ± 12,
482
50 ± 05 and (12 h): 295 ± 16, 160 ± 14, 110 ± 06 respectively (Figure 6C). Similarly, the
483
number of HEKs that migrated into the scratch areas for HEMS-conditioned, CIMS-
484
conditioned, and control group were (12 h): 313 ± 11, 208 ± 12, 81 ± 06 and (24 h): 654 ± 16,
485
355 ± 9, 268 ± 08, respectively (Figure 6D). It can be interpreted from Figure 6C and D, the
ACS Paragon Plus Environment
Page 20 of 52
Page 21 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
486
number of migrated HFFs/HEKs was more significant (p 0.05). Y-error bars represent standard deviation. 126x94mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 42 of 52
Page 43 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Figure 5: (A) Rhodamine Phalloidin-DAPI images of HFFs and HEKs cultivated in CIMS and HEMS-conditioned medium (scale bar represents 50 µm, Red represents nucleus staining DAPI and green depicts cytoskeleton expression); (B) TUNEL assays images of HEKs cultivated in CIMS and HEMS conditioned medium (scale bar represents 50 µm). 213x268mm (300 x 300 DPI)
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 6: Scratch assay images of (A) HFFs and (B) HEKs cultivated in CIMS and HEMS-conditioned medium at different time duration (scale bar represents 100 µm); Cell migration quantification of (C) HFFs and (D) HEKs. Y-error bars represent standard deviation and triple asterisks signify P < 0.001. 119x84mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 44 of 52
Page 45 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Figure 7: (A) Growth factors and cytokines detected in HEMS-conditioned medium by ELISA multi-array; (B) Cellular metabolic activity of HFFs, HEKs and HAMSCs cultured in CIMS/HEMS according to MTT assay; Livedead cell staining of HEKs cultivated in (C) CIMS and (D) HEMS. Y-error bars represent standard deviation and scale bar represents 50 µm. 125x92mm (300 x 300 DPI)
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 8: Pro-angiogenic property analysis of CIMS and HEMS by CAM assay; (A) Macroscopic view, (B) Quantification of vessels converging towards the scaffolds; and (C) Histological analysis of the retrieved CIMS and HEMS after 72 h of incubation (scale bar represents 100 µm). * represents the implanted scaffold; Y-error bars represent standard deviation and triple asterisks signify P < 0.001. 182x197mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 46 of 52
Page 47 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Figure 9: H & E, MT, TB, and anti CD31 of the explanted CIMS/HEMS on day 21 after subcutaneous implantation (scale bar represents 50 µm; Blue represents nucleus staining DAPI and green depicts antibody expression). 114x77mm (300 x 300 DPI)
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 10: Healing progression of full-thickness cutaneous wounds treated with SHAM, CIMS and HEMS; (A) Photographs of wounds and (B) The rate of wound closure on days 0, 7, 14, and 21; (C) RT-PCR analysis of skin wounds treated with SHAM, CIMS and HEMS 21 days post-wounding. Y-error bars represent standard deviation, single asterisks signify P < 0.05, and triple asterisks signify P < 0.001. 99x47mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 48 of 52
Page 49 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Figure 11: Histological micrographs of wound sections implanted with CIMS and HEMS at day 7, 14, and 21 after dermal excision by H & E staining (Black arrow indicates the initial wound boundary created; Scale bar represents 250 µm; Inset scale bar represents 50 µm). 84x33mm (300 x 300 DPI)
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 12: Representative images of (A) MT and (B) anti CD31 of wounds treated with SHAM, CIMS and HEMS (scale bar for MT represents 50 µm; scale bar for anti CD31 represents 100 µm; Red represents nucleus staining DAPI and Green depicts antibody expression). 104x51mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 50 of 52
Page 51 of 52 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Figure 13: Representative Immunohistochemistry images of CK-10 stained histological sections on day 14 and 21 of SHAM, CIMS and HEMS (scale bar represents 50 µm; Red represents nucleus staining DAPI and Green depicts antibody expression). 86x44mm (300 x 300 DPI)
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Graphical Abstract 192x218mm (300 x 300 DPI)
ACS Paragon Plus Environment
Page 52 of 52