Synthesis and Shuttling Behavior of [2] Rotaxanes with a Pyrrole Moiety

Subscriber access provided by MAHIDOL UNIVERSITY (UniNet)

Featured Article

Synthesis and the Shuttling Behavior of [2]Rotaxanes with Pyrrole Moiety Yusuke Matsuoka, Yuichiro Mutoh, Isao Azumaya, Shoko Kikkawa, Takeshi Kasama, and Shinichi Saito J. Org. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.joc.5b02911 • Publication Date (Web): 07 Mar 2016 Downloaded from http://pubs.acs.org on March 8, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

The Journal of Organic Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Synthesis and the Shuttling Behavior of [2]Rotaxanes with Pyrrole Moiety Yusuke Matsuoka,† Yuichiro Mutoh,† Isao Azumaya,‡ Shoko Kikkawa,‡ Takeshi Kasama§ and Shinichi Saito*,†

† Department of Chemistry, Faculty of Science, Tokyo University of Science, Kagurazaka, Shinjuku, Tokyo 162-8601, Japan ‡ Faculty of Pharmaceutical Sciences, Toho University, 2-2-1 Miyama, Funabashi, Chiba 274-8510, Japan § Research Center for Medical and Dental Sciences, Tokyo Medical and Dental University, 1-5-45 Yushima, Bunkyo-ku, Tokyo 113-8510, Japan

† Tokyo University of Science

‡ Toho University

§ Tokyo Medical and Dental University

1 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Graphical Abstract R NH 2 Cu catalyst

N R

Shuttling N R

N R

ABSTRACT We synthesized [2]rotaxane with pyrrole moiety from a [2]rotaxane with 1,3-diynyl moiety. The conversion of the 1,3-diynyl moiety of the axle component to the pyrrole moiety was accomplished by a Cu-mediated cycloaddition of anilines. The cycloaddition reaction was accelerated when the [2]rotaxane was used as the substrate. The effect of the structure of the pyrrole moiety on the rate of the shuttling was studied.

Introduction [2]Rotaxane is an interlocked compound which is composed of a ring component and an axle component.1 The presence of bulky blocking groups at the both ends of the axle component prevents the dissociation of the two components. The ring component could move freely along the axle, or it could be located in a specific position where the favorable


Page 2 of 36

Page 3 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


interaction between the two components exists. The position is referred to as a binding site, a recognition site, or a station. When two stations are present in an axle component, the ring component could move between the two stations (Figure 1a). This phenomenon is called shuttling. The shuttling behavior of the two-station [2]rotaxane has been an attractive subject for the chemists.2 The shuttling could be initiated by various stimuli, and the rate of the shuttling could be controlled by the introduction of a substituent as a kinetic molecular barrier3 between the two stations (Figure 1b). Since the control of the shuttling process is critical for the development of molecular switches and ratchets, the relationship between the structure of the [2]rotaxane and the rate of the shuttling process has been studied by several groups.4 For example, Stoddart and co-workers studied the effect of the structure of the spacer units on the rate of the shuttling process.4a The effect of the flexibility or the length of the axle component on the rate of the shuttling has been studied thoroughly by Hirose and co-workers.4f In the shuttling of the two-station [2]rotaxane, the kinetic barrier between the two stations is the sum of (a) the energy required for the release of the ring component from the station, and (b) the energy required for the ring component to pass through the kinetic molecular barrier (Figure 1b). It is therefore difficult to separate these two factors and 3 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

discuss the relationship between the structure of the kinetic molecular barrier and the activation energy of the shuttling process. In order to quantitatively estimate the effect of the kinetic molecular barrier, it is desirable to synthesize a ‘partitioned’ [2]rotaxane (Figure 1c). In the partitioned [2]rotaxane, the rate of the movement of the ring component between the sections was controlled only by the presence of the kinetic molecular barrier. The ring component moves freely within the section, which is divided by the kinetic molecular barrier. We have been interested in the chemistry of interlocked compounds and synthesized a series of [2]rotaxanes with 1,3-diynyl moiety in the axle component.5 In this paper we report the synthesis of partitioned [2]rotaxanes with N-substituted pyrrole moiety, which act as the kinetic molecular barrier. We carried out the quantitative analysis of the shuttling process and disclosed the relationship between the structure of the kinetic molecular barrier and the rate of the shuttling process.


Page 4 of 36

Page 5 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(a) A Two-Station [2]Rotaxane ring component shuttling

axle component

∆G

Position of the Ring Component

(b) A Two-Station [2]Rotaxane with a Kinetic Molecular Barrier

∆G


(c) This Study: A Partitioned [2]Rotaxane

∆G


Figure 1. The shuttling behavior of [2]rotaxanes.



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Results and Discussion Synthesis of [2]Rotaxanes with Pyrrole Moiety The reaction of 1,3-diyne with amine is a unique method for the synthesis of pyrroles.6 This reaction was catalyzed by CuCl or other metals. It has been postulated that the reaction proceeded by the nucleophilic attack of the amine on the 1,3-diynyl moiety, and this process would be accelerated by the coordination of CuCl to the diynyl moiety. We utilized this reaction to convert the 1,3-diynyl moiety of a [2]rotaxane (1)6e to the corresponding pyrrole (Scheme 1). Compound 1 was treated with an excess of aniline (2a, 20 equiv) in the presence of CuCl (1.0 equiv) at 120 ºC for 2 h, and the formation of the pyrrole was observed. After the removal of the Cu salt by the addition of aqueous ammonia,7 the [2]rotaxane 3a was isolated in 68% yield (Scheme 1). When the reaction time was extended to 7 h, the yield of 3a increased to 76%. Though we initially expected that the reactivity of the 1,3-diynyl moiety in 1 would be low due to the presence of the macrocyclic phenanthroline as a “protective group”,8 the result indicated that the 1,3-diynyl moiety of 1 was sufficiently reactive.


Page 6 of 36

Page 7 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Scheme 1. Synthesis of a [2]Rotaxane with Pyrrole Moiety Ar Ar Ar

O 6 O

N

1) H2N 2a (20 equiv) CuCl (1.0 equiv) neat, 120 ºC, time

6

O N O

2) NH3 aq. CH2Cl2/CH3CN rt, 4 h

O

O

6 O 6 Ar Ar Ar

Ar Ar Ar

6

1 (1.0 equiv)

O

N O N

6

N O

Ar = Cy O O 6 Ar Ar Ar

6 3a (68%, 2 h) (76%, 7 h)

In order to understand the observed high reactivity, we carried out a series of control experiments. The results are summarized in Scheme 2 and Table 1. The rate of the reaction of 1 was comparable to that of the [2]rotaxane-CuCl complex (4): when the reaction of 4 with 2a was carried out under similar reaction conditions, 3a was isolated in 63% yield.9 The observed results could be explained by the facile formation of 4 from 1 and CuCl in situ under the reaction conditions described in Scheme 2. We next studied the reactivity of 5, which is the axle component of 4, in the presence of various copper catalysts (Table 1). The reaction of 5 with 2a (20 equiv) was carried out in the presence of CuCl at 120 ºC for 2 h, and the corresponding pyrrole 6 was isolated in low yield (16%, entry 1). When the reaction was carried out for a longer period (24 h), the



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

yield of 6 increased to 78 %, indicating that the low yield of 6 observed in entry 1 is due to the low catalytic activity of CuCl under the reaction conditions (entry 2). When a phenanthroline-CuCl complex (7) was used as the catalyst, the yield of 6 was low (entry 3). The catalytic activity of the macrocyclic phenanthroline-CuCl complex (8) turned out to be much lower compared to that of CuCl or 7, and only a trace amount of 6 was detected in the reaction mixture (entry 4). The observed high reactivity of 4 as well as 1 in the synthesis of the pyrrole could be explained by the intramolecular activation of the 1,3-diynyl moiety. Since the copper ion was located in the proximity of the axle component, the addition of the amine to the 1,3-diynyl moiety would be accelerated (Scheme 3). This type of activation has been reported in some reactions where the substrate was threaded through the macrocyclic catalyst.10

Scheme 2. Synthesis of a [2]Rotaxane from [2]Rotaxane-CuCl Complex 4 Ar Ar Ar

O 6 O

N CuCl N

O

6

1) H2N 2a (20 equiv) neat, 120 ˚C, 2 h

O 2) NH3 aq. CH2Cl2/CH 3CN rt, 4 h

O 6 O 6 Ar Ar Ar

4 (1.0 equiv)

3a (63%)

Ar = Cy


Page 8 of 36

Page 9 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Table 1. The Reaction of 5 with Aniline 2a in the Presence of Cu Complexes

entry

time (h)

Cu complex

yield (%)

1

2

CuCl

16

2

24

CuCl

78

3

2

7

25

4

2

8

trace

Scheme 3. Proposed Mechanism for the Cu-Mediated Reaction of 1 with Anilines

O 6 O

6

N Cu+ N

1 +

Ar Ar Ar

O

CuCl O O Ar 6 Ar Ar

O

6

H2 N

3a



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 36

In order to study the effect of the structure of the pyrrole moiety on the shuttling behavior of the [2]rotaxane, a series of [2]rotaxanes was synthesized by the reaction of 1 with amines. The results are summarized in Table 2. The reaction of 1 with p-cyclohexylaniline 2b proceeded in the presence of CuCl under similar reaction conditions and the product was isolated in 74% yield (entry 2). We also succeeded in the introduction of

a

larger

substituent

to

the

[2]rotaxane:

the

reaction

of

1

with

p-(4-cyclohexylphenyl)aniline 2c proceeded under similar reaction conditions and the coupling product was isolated in 71% yield (entry 3). Compared to the reaction of 1 with 2a-c, the reaction of 1 with an aliphatic amine (2d) was sluggish. The corresponding [2]rotaxane (3d) was isolated in lower yield (42%) compared to other [2]rotaxanes (entry 4).11


Page 11 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Table 2. Synthesis of Various [2]Rotaxanes with Pyrrole Moiety

entry

1

amine

R

time

prod

yield

(h)

uct

(%)

1

2a

7

3a

76

2

2b

7

3b

74

3

2c

7

3c

71

4

2d

120

3d

42

H NMR Spectra of [2]Rotaxanes 1

H NMR spectra of the [2]rotaxanes (3a-d) indicated that the shuttling process was

affected by the structure of the substituents introduced at the pyrrole moiety.

The 1H

NMR spectra of the [2]rotaxanes were compared and the results are summarized in Figure 2. In the NMR spectrum of 1, sharp signals were observed and the signals of the two blocking groups (two tris(4-cyclohexylbiphenyl)methyl groups) were equivalent. Four strong doublets, which appeared at 7.2-7.5 ppm, were assigned as the signals of the aromatic 11 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

protons of the two blocking groups. The observed results could be explained by the fast movement of the ring moiety along the axle in the NMR time scale: if the shuttling of the ring moiety were slow, the signals of the blocking group would be non-equivalent, and eight doublets would be observed. Compared to the NMR spectrum of 1, the broadening of some signals was observed in the NMR spectrum of 3a. Especially, the signals appeared at 6.5-7.5 ppm, which should correspond to the signals of the aromatic protons of the axle component, were broad and the assignment of the signals was difficult. The broadening was also observed in the NMR spectrum of 3d.

Figure 2. 1H NMR Spectra of 1 and 3a-d (500 MHz, 297 K, CDCl3). 12 ACS Paragon Plus Environment

Page 12 of 36

Page 13 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


On the other hand, no broadening was observed in the NMR spectrum of 3b or 3c. Compared to the NMR spectrum of 1, the number of the signals observed in the spectra of 3b and 3c significantly increased. In order to understand the observed results, we compared the NMR spectrum of 3b with 9, which corresponds to the axle moiety of 3b (Figure 3). As expected, the two blocking groups of 9 were magnetically equivalent, and four doublets (Ha-Hd), which were assigned as the signals of the aromatic protons of the blocking groups, were observed at 7.2-7.5 ppm. Other aromatic protons (He and Hf) also appeared as doublets (6.65 and 6.99 ppm), and the protons of the pyrrole moiety (Hg) appeared as a singlet (6.36 ppm). In contrast, the detailed analysis of the spectrum of 3b indicated that the two blocking groups of 3b were non-equivalent. For example, a doublet, which was observed at 7.51 ppm, was assigned as Hc in the NMR spectrum of 9. In the NMR spectrum of 3b, two doublets (7.50 ppm and 7.43 ppm), which correspond to the signals of Hc and Hc’, respectively, were observed. It is noteworthy that the chemical shift of one doublet observed in 3b is similar to that of the doublet observed in 9, and the other doublet shifted to the higher field. Similar change was observed in other protons (Ha, Hb and Hd). The splitting of the signals was also observed in other aromatic protons incorporated in the axle component (He and Hf). Though the observed difference of the chemical shifts was 13 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 36

g f

O

6

N

e O 6 9

Figure 3. Comparison of the 1H NMR spectra of 3b and 9 (500 MHz, 297 K, CDCl3). small, the protons bound to the pyrrole ring (Hg and Hg’ at 6.30 ppm) were non-equivalent. The difference of the NMR spectra of 9 and 3b could be explained by the inhibited movement of the ring component between the sections of the axle moiety of 3b divided by the pyrrole ring. On the NMR time scale, the ring component resides in one section. In the NMR spectrum of 3b, the chemical shifts of one blocking group (Ha’-Hd’) would be influenced by the presence of the ring moiety in the proximity, and the chemical shifts of Ha’-Hd’ would be different from those of Ha-Hd observed in 9. The other blocking group of 3b would be much less affected by the presence of the ring moiety at the other section, and 14 ACS Paragon Plus Environment

Page 15 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


the chemical shifts of Ha-Hd in 3b would be similar to those observed in 9. The assignment of the signals of 3b was based on the above-mentioned assumption. The difference of the chemical shifts of the blocking groups observed in the 1H NMR spectrum of 3b indicated that the presence of the ring component in the proximity of the blocking group would induce the high-field shift of the signals. We confirmed this by comparing the chemical shifts of a series of [2]rotaxanes. The results are summarized in Figure 4. We compared the NMR spectra of [2]rotaxanes 10,12 1, and 11. Compound 10 is a [2]rotaxane with a very long axle moiety, which is composed of C20 alkylene chain. The length of the alkylene chain was shorter in 1 and very short alkylene groups (propylene groups) were introduced to rotaxane 11. The difference of the NMR spectra of 10 and 1 was very small. On the other hand, the chemical shifts of the blocking group of 11 (7.2-7.5 ppm) were different from those of 1. For example, the signal of Hd’, which was observed as a doublet at 7.32 ppm in the NMR spectrum of 1, shifted to 7.27 ppm in the NMR spectrum of 11. The high-field shifts of other signals (Ha’, Hb’, and Hc’) were also observed. These results strongly imply that the high-field shift of the signals of the blocking group would be observed when the ring moiety is located in the proximity of the blocking group, and justify the assignment of the NMR spectrum of 3b. The NMR spectrum of 3c would be explained similarly. 15 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 36

O

20

f' e' 10 O 20

O

6

1 O 6

O

3

11 O 3

Figure 4. Comparison of the 1H NMR spectra of 1, 10 and 11 (500 MHz, 297 K, CDCl3).

We confirmed that the shuttling in 3b and 3c, which are rotaxanes with bulky kinetic molecular barrier, is very slow on the NMR time scale. Compared to the substituents which were introduced as the kinetic molecular barrier to 3a and 3d, the size of the substituents introduced to 3b and 3c are larger. Therefore, the rate of the shuttling process of 3a and 3d would decrease. The observed NMR spectra of 3a and 3d would reflect the slow movement


Page 17 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


of the ring component between the sections divided by the pyrrole moiety on the NMR time scale. In order to study the shuttling behavior in detail, the VT 1H NMR of 3a was examined (Figure 5). The NMR spectrum of 3a was sharp in CDCl3 at low temperature (233 K). Due to the reduced rate of the shuttling, the non-equivalent signals of the stopper moiety (Ha-Hd and Ha’-Hd’) and p-alkoxyphenyl moiety (He and He’) were observed. The observed spectrum was similar to the NMR spectrum of 3b at rt (297 K, Figure 2). At higher temperature (273-323 K), the broadening of the signals (He and He’) was observed. Two signals (He and He’) merged and they were observed as a broad signal at 313 K. Based on the analysis of the signals of the p-alkoxyphenyl moiety (He and He’), the energy barrier for the shuttling of 3a was estimated to be 14.7 ± 0.2 kcal/mol at 298 ± 2 K in CDCl3 and 15.5 ± 0.1 kcal/mol at 323 ± 1 K in (CDCl2)2 (Table 3, entries 1 and 2). Similar VT 1H NMR experiments were carried out for 3d, and the energy barrier for the shuttling of 3d was estimated to be 13.1 ± 0.3 kcal/mol at 278 ± 5 K in CDCl3 (entry 3).13,14 We confirmed that the shuttling in 1 was very fast on the NMR time scale: the signals of the two dumbbell moieties were magnetically equivalent, and no broadening of the NMR signals was observed at 213 K in CDCl3. In contrast, the shuttling in 3b or 3c was very slow. Even at 17 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

393 K (in (CDCl2)2), no broadening of the NMR signals was observed and the two dumbbell moieties were magnetically non-equivalent.13 The result indicated that the shuttling of the ring component between the two sections was strongly inhibited due to the presence of a bulky kinetic molecular barrier introduced to 3b or 3c. The activation energy (∆G‡) for the shuttling of 3b or 3c was estimated to be larger than 20 kcal/mol.

Figure 5. VT 1H NMR spectra of 3a (500 MHz, CDCl3). 18 ACS Paragon Plus Environment

Page 18 of 36

Page 19 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Table 3. Kinetic Parameters for the Shuttling of [2]Rotaxanes entry

rotax

solvent

ane

coalescence

∆G‡(kcal/

temp (K)

mol)

1

3a

CDCl3

308 ± 2

14.7 ± 0.2

2

3a

(CDCl2)2

325 ± 1

15.5 ± 0.1

3

3d

CDCl3

278 ± 5

13.1 ± 0.3

In summary, we synthesized a series of [2]rotaxanes with pyrrole moiety from a [2]rotaxane with 1,3-diynyl moiety by Cu-mediated cycloaddition reaction. The cycloaddition reaction was accelerated by the presence of the Cu species in the proximity of the 1,3-diynyl moiety of the [2]rotaxane. The relationship between the size of the kinetic molecular barrier and the rate of the shuttling was quantitatively analyzed. The study would contribute to the understanding of the chemistry of [2]rotaxane and provide valuable information for the design of molecular switches and ratchets.

Experimental Section General Information.

Reagents were commercially available and used without

further purification unless otherwise noted. Compounds 1,5b 5,15 10,12 12,5b 13,16 14,5a 15,5a 16,17 18,18 and 215a were prepared by the reported procedure. Chemical shifts were reported in delta units (δ) relative to chloroform (7.24 ppm for 1 H NMR and 77.23 ppm for 19 ACS Paragon Plus Environment

13

C


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

NMR). Multiplicity was indicated by s (singlet), d (doublet), t (triplet), q (quartet), quint (quintet) or m (multiplet). Coupling constants, J, are reported in Hz. High-resolution mass spectra (HR-MS) were obtained by using a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer (ESI) or a time-of-flight mass analyzer (MALDI-TOF). p-(4-Cyclohexylphenyl)aniline (2c)19 A reported procedure20 was generally followed to synthesize 2c. A mixture of 4-bromocyclohexylbiphenyl (12) (1.9 g, 60 mmol, 1.0 equiv), Cu2O (0.086 g, 0.60 mmol, 0.010 equiv), aqueous ammonia (30% solution, 8.4 mL, 120 mmol, 20 equiv) and NMP (8.4 mL, 120 mmol, 20 equiv) in sealed tube under Ar atmosphere was stirred at 100 ºC. After 39 h, the solution was cooled at room temperature, quenched with water, and extracted with CH2Cl2. The combined organic layer was washed with water, brine, and dried over MgSO4 and concentrated in vacuo. The residue was purified by flash silica gel column chromatography using hexane/ethyl acetate (10/1 (v/v)) to afford 2c (0.91 g, 36 mmol, 60%) as white powder. Mp 101.0-101.5 ºC (lit.19 mp 102 ºC). 1H NMR (500 MHz, CDCl3) δ: 7.47 (d, J = 8.0 Hz, 2H), 7.41 (d, J = 8.0 Hz, 2H), 7.25 (d, J = 8.0 Hz, 2H), 6.75 (d, J = 8.0 Hz, 2H), 3.67 (br s, 2H), 2.53 (t, J = 10.0 Hz, 1H), 1.96-1.72 (m, 5H), 1.51-1.22 (m, 5H); 13C NMR (125 MHz, CDCl3) δ: 146.3, 145.7, 138.8, 131.8, 128.0, 127.3, 126.4, 115.6, 44.3, 34.7, 27.1, 26.4; IR (ATR) 3397, 3386, 3324, 3311, 3212, 3026, 2920, 2846, 1604, 1495, 1445, 1265, 1178, 1138, 1000, 807, 692, 515, 474 cm-1; Anal. Calcd for C18H21N: C, 86.01; H, 8.42; N, 5.57. Found: C, 86.00; H, 8.47; N, 5.58. [2]Rotaxane with pyrrole moiety (3a) (Procedure A) 20 ACS Paragon Plus Environment

Page 20 of 36

Page 21 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


A mixture of [2]rotaxane (1) (25 mg, 0.010 mmol, 1.0 equiv), CuCl (1.0 mg, 0.010 mmol, 1.0 equiv) and aniline 2a (20 µL, 0.2 mmol, 20 equiv) under Ar atmosphere was stirred at 120 ºC for 7 h. The reaction was monitored by TLC using hexane/CH2Cl2 (2/1 (v/v)). To the mixture was added CH2Cl2 (1.5 mL), CH3CN (3.5 mL), aqueous ammonia (30% solution, 1.7 mL). After stirring at room temperature for 4 h, the mixture was extracted with CH2Cl2, and the combined organic layer was washed with water and brine, dried over Na2SO4 and concentrated in vacuo. The crude product was purified by flash silica gel column chromatography using hexane/CH2Cl2 (5/3→1/1 (v/v)) and GPC using CHCl3 to afford 3a (19.5 mg, 0.0076 mmol, 76%) as pale yellow amorphous solid. 1

H NMR (500 MHz, CDCl3) δ: 8.37 (d, J = 8.6 Hz, 4H), 8.21 (d, J = 8.6 Hz, 2H), 8.02 (d, J

= 8.0 Hz, 2H), 7.72 (s, 2H), 7.55-7.16 (br m, 48H), 7.09-6.99 (m, 6H), 6.91 (d, J = 8.0 Hz, 8H), 6.84-6.57 (br m, 4H), 6.42 (s, 1H), 6.40 (s, 2H), 6.29 (s, 2H), 3.78 (t, J = 5.7 Hz, 12H), 2.51 (s, 10H), 1.94-1.64 (m, 42H), 1.49-1.08 (m, 50H);

13

C NMR (125 MHz, CDCl3) δ:

160.53, 160.51, 157.9, 156.5, 147.2, 146.5, 146.3, 139.3 138.5, 138.4, 136.8, 135.4, 132.2, 130.2, 130.0, 129.7, 129.1, 128.8, 127.6, 127.3, 127.2, 127.0, 126.4, 126.1, 125.7, 119.4, 114.9, 114.1, 109.1, 106.9, 101.4, 68.1, 68.0, 67.8, 67.7, 56.1, 44.4, 40.6, 34.7, 34.6, 29.9, 29.8, 29.4, 27.12, 27.05, 26.4, 26.2, 26.0; IR (ATR) 3026, 2920, 2848, 1601, 1587, 1495, 1447, 1243, 1173, 1151, 1004, 833, 811, 773, 525 cm-1; HR-MS (MALDI-TOF) Calcd for C186H195N3O6 ([M + H]+): 2567.5119. Found: 2567.5177. [2]Rotaxane with pyrrole moiety (3b) Procedure A was generally followed to synthesize 3b from 2b (35 mg, 0.20 mmol, 20 equiv), CuCl (1.0 mg, 0.010 mmol, 1.0 equiv) and 1 (25 mg, 0.010 mmol, 1.0 equiv). The 21 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

crude product was purified by flash silica gel column chromatography using hexane/CH2Cl2 (5/3→1/1 (v/v)) and GPC using CHCl3 to afford 3b (19.6 mg, 0.0073 mmol, 74%) as pale yellow amorphous solid. 1

H NMR (500 MHz, CDCl3) δ: 8.37 (d, J = 8.6 Hz, 4H), 8.20 (d, J = 8.6 Hz, 2H), 8.01

(d, J = 8.6 Hz, 2H), 7.72 (s, 2H), 7.50 (dd, J = 8.9, 4.4 Hz, 12H), 7.43 (d, J = 8.0 Hz, 6H), 7.39 (d, J = 8.0 Hz, 6H), 7.35 (d, J = 8.0 Hz, 6H), 7.27-7.18 (m, 19H), 7.07 (t, J = 8.0 Hz, 1H), 7.02 (d, J = 9.2 Hz, 2H), 6.91 (d, J = 8.6 Hz, 4H), 6.88 (dd, J = 8.9, 4.4 Hz, 4H), 6.83 (d, J = 7.4 Hz, 4H), 6.61 (d, J = 9.2 Hz, 2H), 6.45-6.44 (m, 1H), 6.42 (dd, J = 8.3, 2.0 Hz, 2H), 6.30-6.29 (m, 2H), 3.88-3.72 (m, 11H), 2.65-2.44 (m, 10H), 2.24 (t, 1H), 1.91-1.58 (m, 47H), 1.48-1.09 (m, 55H);

13

C NMR (125 MHz, CDCl3) δ: 160.53, 160.50, 157.9,

157.6, 156.5, 147.3, 147.1, 146.5, 146.4, 146.3, 138.6, 138.40, 138.37, 136.8, 136.7, 135.4, 135.3, 132.2, 130.1, 130.0, 129.8, 129.7, 129.0, 128.7, 127.6, 127.4, 127.3, 127.1, 127.02, 126.95, 126.5, 126.4, 126.2, 126.1, 125.7, 119.3, 114.9, 114.3, 113.9, 109.0, 108.9, 107.0, 101.4, 68.0, 67.9, 67.8, 56.2, 56.1, 44.4, 43.9, 40.6, 34.7, 34.3, 30.7, 30.4, 30.0, 29.7, 29.5, 29.4, 27.1, 26.9, 26.5, 26.4, 26.21, 26.16, 26.0, 25.9; IR (ATR) 3032, 2921, 2849, 1602, 1587, 1495, 1471, 1446, 1245, 1173, 1004, 811, 527 cm-1; HR-MS (MALDI-TOF) Calcd for C192H205N3O6 ([M + H]+): 2649.5901. Found: 2649.5892. [2]Rotaxane with pyrrole moiety (3c) Procedure A was generally followed to synthesize 3c from 2c (50 mg, 0.20 mmol, 20 equiv), CuCl (1.0 mg, 0.010 mmol, 1.0 equiv) and 1 (25 mg, 0.010 mmol, 1.0 equiv). The crude product was purified by flash silica gel column chromatography using


Page 22 of 36

Page 23 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


hexane/CH2Cl2 (5/3→1/1 (v/v)) and GPC using CHCl3 to afford 3b (19.4 mg, 0.0071 mmol, 71%) as pale yellow amorphous solid. 1

H NMR (500 MHz, CDCl3) δ: 8.35 (d, J = 8.6 Hz, 4H), 8.19 (d, J = 8.0 Hz, 2H), 7.98

(d, J = 8.0 Hz, 2H), 7.72 (s, 2H), 7.50 (dd, J = 10.9, 8.6 Hz, 12H), 7.43 (d, J = 8.6 Hz, 6H), 7.39 (d, J = 8.6 Hz, 6H), 7.35 (d, J = 8.6 Hz, 6H), 7.30 (dd, J = 10.6, 8.3 Hz, 4H), 7.25 (d, J = 5.2 Hz, 8H), 7.23 (d, J = 8.6 Hz, 6H), 7.20 (d, J = 8.0 Hz, 6H), 7.10-7.04 (m, 5H), 6.94 (d, J = 8.0 Hz, 2H), 6.90 (t, J = 9.7 Hz, 6H), 6.84 (d, J = 9.2 Hz, 2H), 6.62 (d, J = 9.2 Hz, 2H), 6.42 (s, 1H), 6.40 (dd, J = 5.2, 2.6 Hz, 2H), 6.30 (q, J = 3.4 Hz, 2H), 3.85-3.74 (m, 12H), 2.62-2.60 (m, 2H), 2.53-2.51 (m, 9H), 1.82-1.65 (m, 47H), 1.34-1.24 (m, 55H); 13C NMR (125 MHz, CDCl3) δ: 160.52, 160.48, 158.0, 157.7, 156.5, 147.5, 147.2, 147.1, 146.5, 146.4, 146.3, 139.5, 138.6, 138.41, 138.38, 138.1, 137.3, 136.8, 135.4, 135.3, 132.2, 130.3, 130.1, 130.0, 129.8, 129.7, 129.3, 129.1, 127.6, 127.4, 127.28, 127.26, 127.03, 127.0, 126.9, 126.5, 126.4, 126.1, 126.0, 125.7, 119.4, 114.9, 114.4, 114.0, 109.3, 109.1, 106.9, 101.5, 68.1, 67.9, 67.8, 56.2, 56.1, 44.4, 34.7, 34.6, 32.1, 30.7, 30.4, 29.9, 29.7, 29.5, 29.3, 27.1, 26.5, 26.4, 26.2, 26.1, 26.0, 22.9, 14.3; IR (ATR) 3026, 2921, 2849, 1602, 1587, 1495, 1446, 1245, 1173, 1151, 1004, 811, 525 cm-1; HR-MS (MALDI-TOF) Calcd for C198H209N3O6 ([M + H]+): 2725.6214. Found: 2725.6410. [2]Rotaxane with pyrrole moiety (3d) Procedure A was generally followed to synthesize 3d from 2d (60 µL, 0.48 mmol, 20 equiv), CuCl (3.0 mg, 0.024 mmol, 1.0 equiv) and 1 (60 mg, 0.024 mmol, 1.0 equiv). The reaction mixture was stirred at 120 ºC for 120 h. The crude product was purified by flash silica gel column chromatography using hexane/CH2Cl2 (5/3→1/1 (v/v)) and GPC using 23 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

CHCl3 to afford 3b (26 mg, 0.010 mmol, 42%) as pale yellow amorphous solid. 1


= 8.6 Hz, 2H), 7.71 (s, 2H), 7.46-7.44 (brm, 24H), 7.31-7.29 (brm, 12H), 7.23-7.21 (brm, 17H), 7.09 (t, J = 8.0 Hz, 1H), 6.92 (d, J = 9.2 Hz, 8H), 6.52 (t, J = 10.0 Hz, 1H), 6.44 (dd, J = 8.0, 2.3 Hz, 2H), 6.06 (s, 2H), 3.91 (t, J = 10.0 Hz, 4H), 3.85-3.80 (m, 10H), 2.50 (s, 10H), 1.89-1.73 (m, 45H), 1.46-1.16 (m, 55H), 1.00-0.99 (m, 2H), 0.66-0.63 (m, 2H), 0.38 (t, J = 7.4 Hz, 3H);

13

C NMR (125 MHz, CDCl3) δ: 160.6, 160.5, 158.3, 156.5, 147.2,

146.5, 146.3, 138.5, 138.4, 136.9, 135.8, 132.2, 130.4, 130.0, 129.7, 129.1, 127.7, 127.4, 127.0, 126.9, 126.4, 125.8, 119.4, 114.8, 114.6, 108.7, 106.9, 101.5, 68.2, 68.1, 67.8, 56.1, 44.4, 40.6, 34.7, 32.9, 30.6, 29.8, 29.4, 27.1, 26.4, 26.2, 26.0, 19.5, 13.6; IR (ATR) 3083, 3028, 2922, 2849, 1601, 1587, 1494, 1420, 1245, 1173, 1151, 1004, 833, 810, 527 cm-1; HR-MS (MALDI-TOF) Calcd for C184H199N3O6 ([M + H]+): 2547.5432. Found: 2547.5488. [2]Rotaxane-CuCl complex (4) To a solution of [2]rotaxane 1 (82 mg, 0.03 mmol, 1.0 equiv) in CH2Cl2 (1.4 mL) was added a solution of CuCl (33 mg, 0.03 mmol, 1.0 equiv) in CH3CN (0.6 mL) was stirred at room temperature for 24 h, and the reaction mixture was concentrated in vacuo. The crude product was purified by flash silica gel column chromatography using hexane/CH2Cl2 (1/1→1/5 (v/v)) to afford 4 (48 mg, 0.02 mmol, 65%) as orange amorphous solid. 1

H NMR (500 MHz, CDCl3) δ: 8.30 (d, J = 8.6 Hz, 4H), 8.26 (brs, 2H), 7.97-7.95 (brm,

2H), 7.78 (s, 2H), 7.49 (dd, J = 8.3, 4.2 Hz, 24H), 7.35 (d, J = 8.6 Hz, 12H), 7.25 (d, J = 8.0 Hz, 12H), 7.20-7.14 (m, 4H), 7.09 (t, J = 8.3 Hz, 1H), 6.86 (d, J = 8.0 Hz, 4H), 6.72 (d, J = 7.4 Hz, 4H), 6.63 (s, 1H), 6.45 (dd, J = 8.0, 1.7 Hz, 2H), 3.88 (t, J = 6.3 Hz, 4H), 3.84-3.82


Page 24 of 36

Page 25 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(brm, 4H), 3.78 (t, J = 6.9 Hz, 4H), 2.64-2.57 (m, 4H), 2.56-2.47 (m, 6H), 1.94-1.61 (m, 42H), 1.48-1.17 (m, 52H);

13

C NMR (125 MHz, CDCl3) δ: 160.6, 160.5, 159.8, 158.6,

147.2, 146.5, 143.9, 138.6, 138.3, 137.5, 134.0, 131.5, 131.1, 129.9, 129.8, 129.3, 127.5, 127.4, 127.0, 126.4, 125.9, 124.2, 114.7, 114.4, 107.4, 101.0, 85.7, 74.7, 68.3, 68.0, 67.8, 56.2, 44.4, 40.6, 34.6, 30.4, 29.6, 29.4, 29.0, 27.1, 26.4, 26.2, 25.9, 25.6; IR (ATR) 3024, 2921, 2849, 1600, 1585, 1494, 1470, 1247, 1169, 1151, 1004, 830, 811, 530, 403 cm-1; Anal. Calcd for C180H188ClCuN2O6: C, 83.98; H, 7.36; N, 1.09 Found: C, 83.65; H, 7.36; N, 1.20. Axle component with pyrrole moiety (6) (Procedure B) A mixture of 1,3-diyne (5) (18 mg, 0.010 mmol, 1.0 equiv), CuCl (1.0 mg, 0.010 mmol, 1.0 equiv) and aniline (2a) (20 µL, 0.20 mmol, 20 equiv) was stirred at 120 ºC for 7 h. The reaction was monitored by TLC using hexane/CH2Cl2 (5/1 (v/v)). The reaction mixture was cooled to room temperature and concentrated in vacuo. The crude product was purified by flash silica gel column chromatography using hexane/CH2Cl2 (6/1 (v/v)) and GPC using CHCl3 to afford 6 (15 mg, 0.0078 mmol, 78%) as pale yellow amorphous solid. 1

H NMR (500 MHz, CDCl3) δ: 7.50 (dd, J = 8.6, 4.3 Hz, 24H), 7.36 (d, J = 8.6 Hz, 12H),

7.25 (d, J = 9.2 Hz, 12H), 7.18 (t, J = 3.2 Hz, 2H), 6.99-6.96 (m, 1H), 6.93 (d, J = 8.6 Hz, 4H), 6.66 (d, J = 8.6 Hz, 4H), 6.36 (s, 2H), 3.83 (t, J = 6.3 Hz, 4H), 2.56 (dd, J = 36.7, 25.2 Hz, 10H), 1.94-1.63 (m, 33H), 1.50-1.14 (m, 45H); 13C NMR (125 MHz, CDCl3) δ: 157.8, 147.3, 146.5, 139.3, 138.7, 138.4, 135.4, 130.1, 129.8, 129.2, 128.9, 127.4, 127.2, 127.0, 126.5, 126.0, 114.1, 109.1, 68.0, 56.2, 44.4, 40.7, 34.7, 30.4, 29.5, 27.1, 26.4, 26.1, 25.9; IR (ATR) 3025, 2920, 2848, 1608, 1496, 1467, 1446, 1385, 1240, 1174, 1004, 773, 529 cm-1; 25 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 36

HR-MS (ESI) Calcd for C144H153NO2 ([M]+): 1928.1891. Found: 1928.1896. Axle component with pyrrole moiety (9) Procedure B was generally followed to synthesize 9. A mixture of 2b (70 mg, 0.40 mmol, 20 equiv), CuCl (1.0 mg, 0.010 mmol, 1.0 equiv) and 5 (36 mg, 0.020 mmol, 1.0 equiv) was stirred at 120 ºC for 24 h. The crude product was purified by flash silica gel column chromatography using hexane/CH2Cl2 (5/3→1/1 (v/v)) and GPC using CHCl3 to afford 9 (22 mg, 0.011 mmol, 55%) as pale yellow amorphous solid. 1


7.25 (t, J = 6.6 Hz, 12H), 7.02 (d, J = 8.0 Hz, 2H), 6.93 (d, J = 8.6 Hz, 4H), 6.89 (d, J = 8.6 Hz, 2H), 6.65 (d, J = 8.6 Hz, 4H), 6.36 (s, 2H), 3.84 (t, J = 6.3 Hz, 4H), 2.67-2.60 (m, 4H), 2.57-2.50 (m, 6H), 2.47-2.40 (m, 1H), 1.94-1.65 (m, 39H), 1.50-1.16 (m, 51H);

13

C NMR

(125 MHz, CDCl3) δ: 157.7, 147.3, 146.5, 138.7, 138.4, 135.4, 130.0, 129.8, 128.8, 127.4, 127.2, 127.0, 126.5, 126.1, 114.0, 108.9, 68.0, 56.2, 44.4, 44.2, 40.7, 34.7, 34.6, 30.4, 29.5, 27.1, 27.0, 26.4, 26.3, 26.2, 25.9; IR (ATR) 3025, 2920, 2848, 2657, 1903, 1608, 1513, 1496, 1446, 1385, 1240, 1174, 1004, 830, 810, 777, 527 cm-1; Anal. Calcd for C150H163NO2 ·H2O: C, 88.75; H, 8.19; N, 0.69. Found: C, 88.84; H, 8.22; N, 0.74; HR-MS (ESI) Calcd for C150H163NO2 ([M]+): 2010.2678. Found: 2010.2700. Phenanthroline-CuCl complex (7) (procedure C) A reported procedure5a was generally followed to synthesize 7. To a solution of 2,9-bis(4methoxyphenyl)-1,10-phenanthroline (13, 157 mg, 0.40 mmol, 1.0 equiv) in CH2Cl2 (20 mL) was added the solution of CuCl (40 mg, 0.40 mmol, 1.0 equiv) in CH3CN (8 mL). After 1 h stirring, the solvent was removed in vacuo. The residue was purified by 26 ACS Paragon Plus Environment

Page 27 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


recrystallization from hexane-CH2Cl2 to afford 7 (168 mg, 0.34 mmol, 85%) as purple powder. Mp 233.2-233.9 ºC. 1H NMR (300 MHz, CDCl3) δ: 8.48 (d, J = 8.6 Hz, 2H), 8.00 (s, 2H), 7.84 (d, J = 8.3 Hz, 2H), 7.38 (d, J = 8.6 Hz, 4H), 6.03 (d, J = 8.6 Hz, 4H), 3.46 (s, 6H); 13C NMR (75 MHz, CDCl3) δ: 160.3, 156.6, 143.7, 137.3, 131.3, 129.4, 128.0, 126.3, 124.7, 112.8, 55.5; IR (ATR) 3046, 3007, 2955, 2933, 2906, 2832, 1606, 1583, 1496, 1488, 11254, 1176, 1026, 830 cm-1; Anal. Calcd for C26H20ClCuN2O2·H2O: C, 61.30; H, 4.35; N, 5.50. Found: C, 61.02; H, 4.17; N, 5.44. Macrocyclic phenanthroline-CuCl complex (8) Procedure C was generally followed to synthesize 8. To a solution of a macrocyclic phenanthroline (14, 144 mg, 0.23 mmol, 1.0 equiv) in CH2Cl2 (10 mL) was added the solution of CuCl (22.3 mg, 0.23 mmol, 1.0 equiv) in CH3CN (4 mL). After 1 h stirring, the solvent was removed in vacuo. The residue was purified by recrystallization from hexane-CH2Cl2 to afford 8 (116 mg, 0.16 mmol, 70%) as a pale brown powder. Mp 118.4-119.1 ºC. 1H NMR (500 MHz, CDCl3) δ: 8.73-7.61 (m, 10H), 7.13 (t, J = 8.0 Hz, 1H), 7.03 (s, 4H), 6.57 (s, 1H), 6.47 (dd, J = 8.0, 2.3 Hz, 2H), 4.01 (t, J = 7.2 Hz, 4H), 3.94 (t, J = 6.0 Hz, 4H), 1.93-1.38 (m, 18H);

13

C NMR (125 MHz, CDCl3) δ: 161.4, 160.7,

137.8, 129.8, 126.3, 114.8, 107.0, 101.3, 68.0, 29.8, 28.9, 26.0 (some signals are missing); IR (ATR) 3060, 3038, 2937, 2863, 1604, 1586, 1489, 1253, 1177, 1152, 1019, 836 cm-1; HR-MS (ESI) Calcd for C42H42N2O4ClCu ([M]+): 736.2125. Found: 736.2124. Synthesis of 11 4,4,4-Tris(4'-cyclohexyl-[1,1'-biphenyl]-4-ylbutan-1-ol (17) 27 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

A reported procedure5a was generally followed to synthesize 17. To a solution of tris(4'-cyclohexyl-[1,1'-biphenyl]-4-yl)methane (15, 0.50 g, 0.70 mmol, 1.0 equiv) in dry THF (3 mL) was added 1.6 M n-BuLi in hexane (0.85 mL, 1.4 mmol, 2.0 equiv) with stirring at room temperature under Ar. To the resulting blue suspension was added 1-bromo-3-(methoxymethoxy)propane (16, 0.13 g, 0.70 mmol, 1.0 equiv) at room temperature. After 24 h, the reaction mixture was diluted with MeOH (6.1 mL) and added conc. HCl (0.6 mL). Then the mixture was heated to 60 °C and stirred for overnight. After the addition of water, the mixture was extracted with CH2Cl2. The combined organic layer was washed with water and brine, dried over MgSO4 and concentrated in vacuo. The residue was purified by flash silica gel column chromatography (hexane/ethyl acetate = 10/1) as the eluent to afford 17 (0.54 g, 0.45 mmol, 65%) as white amorphous solid. 1


7.26 (d, J = 8.6 Hz, 6H), 3.66 (t, J = 6.6 Hz, 2H), 2.73-2.72 (m, 2H), 2.54-2.52 (m, 3H), 1.94-1.71 (m, 15H), 1.53-1.20 (m, 17H);

13

C NMR (125 MHz, CDCl3) δ: 147.3, 146.2,

138.8, 138.4, 129.8, 127.4, 127.0, 126.6, 63.6, 55.9, 44.4, 36.71, 34.66, 29.4, 27.1, 26.4; IR (ATR) 3582, 3437, 3025, 2921, 2848, 2662, 1905, 1495, 1446, 1004, 809, 779, 527 cm-1; Anal. Calcd for C58H64O·H2O: C, 87.61; H, 8.37. Found: C, 87.75; H, 8.41. HR-MS (ESI) Calcd for C58H64ONa ([M+Na]+): 799.4849. Found: 799.4881. 4,4,4-Tris(4’-cyclohexyl-[1,1’-biphenyl]-4-yl)-1-(4-ethynyltrimethylsilylphenoxy)butan e (19) A reported procedure21 was generally followed to synthesize 19. To a solution of 2-(4-hydroxyphenyl)-1-trimethylsilylacetylene (18) (73.4 mg, 0.32 mmol, 1.2 equiv) and 28 ACS Paragon Plus Environment

Page 28 of 36

Page 29 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


PPh3 (100 mg, 0.38 mmol, 1.2 equiv) in dry THF (1 mL) was added to a solution of 4,4,4-tris(4'-cyclohexyl-[1,1'-biphenyl]-4-yl)butan-1-ol (17) (250 mg, 0.32 mmol, 1.0 equiv) and diethyl azodicarboxylate (40% toluene solution, 0.17 mL, 0.38 mmol, 1.2 equiv) in dry THF (1 mL) and the solution was refluxed under Ar atmosphere for 23 h. The solvent was removed in vacuo and the residue was purified by short flash silica gel column chromatography using hexane/CH2Cl2 (10/1 (v/v)) to afford 19 (252 mg, 0.27 mmol, 83%) as white amorphous solid. 1

H NMR (500 MHz, CDCl3) δ: 7.51 (dd, J = 4.9, 3.1 Hz, 12H), 7.40 (dd, J = 8.6, 5.2 Hz,

8H), 7.27 (d, J = 8.0 Hz, 6H), 6.81 (d, J = 8.6 Hz, 2H), 3.94 (t, J = 6.0 Hz, 2H), 2.86-2.80 (m, 0H), 2.57-2.49 (m, 3H), 1.95-1.64 (m, 18H), 1.50-1.21 (m, 16H), 0.25 (d, J = 3.4 Hz, 9H); 13C NMR (125 MHz, CDCl3) δ: 159.4, 147.3, 146.1, 138.9, 138.4, 133.7, 129.8, 127.4, 127.1, 126.6, 115.3, 114.6, 105.5, 92.6, 68.3, 55.9, 44.4, 36.9, 27.1, 26.4, 26.0; IR (ATR) 3026, 2922, 2849, 2152, 1604, 1504, 1447, 1245, 1003, 863, 838, 811, 538 cm-1; HR-MS (ESI) Calcd for C69H76OSi ([M]+): 948.5674. Found: 948.5660. 4,4,4-Tris(4’-cyclohexyl-[1,1’-biphenyl]-4-yl)-1-(4-ethynylphenoxy)butane (20) A reported procedure21 was generally followed to synthesize 20. A mixture of 19 (180 mg, 0.19 mmol, 1.0 equiv) and K2CO3 (131 mg, 0.95 mmol, 5.0 equiv) in MeOH (2 mL) and THF (1 mL) was stirred at room temperature for 24 h. The solvent was removed in vacuo. To the mixture was added water and CH2Cl2. The organic layer was washed with water and brine, dried over MgSO4 and concentrated in vacuo. The residue was purified by short flash silica gel column chromatography using hexane/CH2Cl2 (8/1 (v/v)) to afford 20 (150 mg, 0.17 mmol, 90%) as white amorphous solid. 29 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 30 of 36

H NMR (500 MHz, CDCl3) δ: 7.54 (dd, J = 8.0, 4.6 Hz, 12H), 7.43 (dd, J = 4.0, 2.0 Hz,

8H), 7.28 (d, J = 8.0 Hz, 6H), 6.85 (d, J = 8.6 Hz, 2H), 3.94 (t, J = 6.3 Hz, 2H), 3.01 (s, 1H), 2.85-2.85 (m, 2H), 2.60-2.51 (m, 3H), 1.98-1.66 (m, 15H), 1.53-1.23 (m, 17H);

13

C NMR

(125 MHz, CDCl3) δ: 159.6, 147.3, 146.1, 138.8, 138.3, 133.8, 129.7, 127.4, 127.0, 126.6, 114.7, 114.2, 84.0, 76.0, 68.3, 55.9, 44.4, 36.8, 34.6, 27.1, 26.4, 26.0; IR (ATR) 3313, 3286, 3025, 2848, 1605, 1503, 1495, 1446, 1245, 1004, 809, 533 cm-1; Anal. Calcd for C66H68O·H2O: C, 88.54; H, 7.88. Found: C, 88.25; H, 7.71. HR-MS (ESI) Calcd for C66H69O ([M+H]+): 877.5343. Found: 877.5335. [2]Rotaxane (11) A reported procedure21 was generally followed to synthesize 11. A mixture of 20 (44 mg, 0.050 mmol, 2.5 equiv), macrocyclic phenanthroline-CuI complex (21) (17 mg, 0.02 mmol, 1.0 equiv), K2CO3 (10 mg, 0.075 mmol, 3.8 equiv) and I2 (6.3 mg, 0.025 mmol, 1.3 equiv) in dry-xylene (1.0 mL) under Ar atmosphere was stirred at 130 °C for 20 h. The solution was cooled to room temperature and CH2Cl2 (1.5 mL), CH3CN (3.5 mL) and aqueous ammonia (30% solution, 1.7 mL) was added. After stirring at room temperature for 4 h, the solution was extracted with CH2Cl2, and the combined organic layer was washed with water and brine, dried over Na2SO4 and concentrated in vacuo. The residue was purified by flash silica gel column chromatography using hexane/CH2Cl2 (3/1 (v/v)) and GPC using CHCl3 to afford 11 (29 mg, 0.014 mmol, 70%) as colorless amorphous solid. 1


= 8.0 Hz, 2H), 7.69 (s, 2H), 7.47 (d, J = 8.0 Hz, 16H), 7.43 (d, J = 8.6 Hz, 12H), 7.27 (d, J = 8.0 Hz, 12H), 7.24 (d, J = 8.6 Hz, 14H), 7.13 (t, J = 8.0 Hz, 1H), 6.96 (d, J = 9.2 Hz, 4H), 30 ACS Paragon Plus Environment

Page 31 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


6.82 (d, J = 8.6 Hz, 4H), 6.68 (s, 1H), 6.48 (dd, J = 8.0, 2.3 Hz, 2H), 3.97 (t, J = 6.6 Hz, 4H), 3.91 (t, J = 7.2 Hz, 4H), 3.82 (t, J = 6.0 Hz, 4H), 2.65-2.60 (m, 4H), 2.55-2.48 (m, 6H), 1.93-1.72 (m, 38H), 1.55-1.21 (m, 42H);

13

C NMR (125 MHz, CDCl3) δ: 160.7, 160.5,

160.0, 156.7, 147.3, 146.3, 146.0, 138.7, 138.3, 136.8, 134.3, 132.2, 129.9, 129.7, 129.2, 127.6, 127.4, 127.0, 126.5, 125.8, 119.5, 114.98, 114.96, 113.8, 107.4, 100.9, 81.8, 73.7, 68.5, 68.1, 68.0, 55.8, 44.4, 36.7, 34.7, 29.8, 29.3, 27.1, 26.4, 26.1, 26.0, 25.9; IR (ATR) 3026, 2921, 2848, 1905, 1600, 1587, 1493, 1471, 1446, 1285, 1245, 1169, 1151, 1018, 1004, 905, 831, 810, 797, 729, 687, 639, 629, 563, 530, 511 cm-1; HR-MS (MALDI-TOF) Calcd for C174H176N2O6 ([M + H]+): 2390.3601. Found: 2390.3626.

ASSOCIATED CONTENT Supporting Information. The spectral data for new compounds, and the details of VT NMR studies. The Supporting Information is available free of charge via the Internet at http://pubs.acs.org. AUTHOR INFORMATION Corresponding Author

* Tel: +81-3-5228-8715. E-mail: [email protected]

Notes The authors declare no competing financial interest.



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACKNOWLEDGMENT This work was supported in part by JSPS KAKENHI Grant Number 26410125. References (1) For selected reviews, see, (a) Sauvage, J. P. Acc. Chem. Res. 1990, 23, 319−327. (b) Amabilino, D. B.; Stoddart, J. F. Chem. Rev. 1995, 95, 2725-2828. (c) Jager, R.; Vögtle, F. Angew. Chem., Int. Ed. Engl. 1997, 36, 930−944. (d) Sauvage, J.-P. Acc. Chem. Res. 1998, 31, 611-619. (e) Tian, H.; Wang, Q.-C. Chem. Soc. Rev. 2006, 35, 361-374. (f) Crowley, J. D.; Goldup, S. M.; Lee, A.-L.; Leigh, D. A.; McBurney, R. T. Chem. Soc. Rev. 2009, 38, 1530-1541. (g) Beves, J. E.; Blight, B. A.; Campbell, C. J.; Leigh, D. A.; McBurney, R. T. Angew. Chem., Int. Ed. 2011, 50, 9260-9327. (h) Xue, M.; Yang, Y.; Chi, X.; Yan, X.; Huang, F. Chem. Rev. 2015, 115, 7398-7501. (2) For recent examples and reviews, see, (a) Garaudée, S.; Silvi, S.; Venturi, M.; Credi, A.; Flood, A. H.; J. Stoddart, J. F. ChemPhysChem 2005, 6, 2145-2152. (b) Kay, E. R.; Leigh, D. A.; Zerbetto, F. Angew. Chem., Int. Ed. 2007, 46, 72-191. (c) Günbaş, D. D.; Brouwer, A. M. J. Org. Chem. 2012, 77, 5724-5735. (d) Zhu, K.; Vukotic, V. N.; Loeb, S. J. Angew. Chem., Int. Ed. 2012, 51, 2168-2172. (e) Coutrot, F. ChemistryOpen 2015, 4, 556-576. (f) Ogoshi, T.; Iizuka, R.; Kotera, D.; Yamagishi, T. Org. Lett. 2015, 17, 350-353. 32 ACS Paragon Plus Environment

Page 32 of 36

Page 33 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(3) (a) Carlone, A.; Goldup, S. M. Lebrasseur, N.; Leigh, D. A. Wilson, A. J. Am. Chem. Soc. 2012, 134, 8321-8323. (b) Busseron, E.; Coutrot, F. J. Org. Chem. 2013, 78, 4099-4106. (4) For recent examples, see, (a) Kang, S.; Vignon, S. A.; Tseng, H.-R.; Stoddart, J. F. Chem. Eur. J. 2004, 10, 2555-2564. (b) Jeppesen, J. O.; Nygaard, S.; Vignon, S. A.; Stoddart, J. F. Eur. J. Org. Chem. 2005, 196-220. (c) Chatterjee, M. N.; Kay, E. R.; Leigh, D. A. J. Am. Chem. Soc. 2006, 128, 4058-4573. (d) Hirose, K.; Shiba, Y.; Ishibashi, K.; Doi, Y.; Tobe, Y. Chem. Eur. J. 2008, 14, 3427-3433. (e) Hmadeh, M.; Fahrenbach, A. C.; Basu, S.; Trabolsi, A.; Benítez, D.; Li, H.; Albrecht-Gary, A.-M.; Elhabiri, M.; Stoddart, J. F. Chem. Eur. J. 2011, 17, 6076-6087. (f) Young, P. G.; Hirose, K.; Tobe, Y. J. Am. Chem. Soc. 2014, 136, 7899-7906. (g) Han, X.; Cao, M.; Xu, Z.; Wu, D.; Chen, Z.; Wu, A.; Liu, S. H.; Yin, J. Org. Biomol. Chem. 2015, 13, 9767-9774. (5) (a) Saito, S.; Takahashi, E.; Nakazono, K. Org. Lett. 2006, 8, 5133-5136. (b) Saito, S.; Takahashi, E.; Wakatsuki, K.; Inoue, K.; Orikasa, T.; Sakai, S.; Yamasaki, R.; Mutoh, Y.; Kasama, T. J. Org. Chem. 2013, 78, 3553-3560. (c) Saito, S. J. Incl. Phenom. Macrocycl. Chem. 2015, 82, 437-451. (6) (a) Reisch, J.; Schulte, K. E. Angew. Chem. 1961, 73, 241. (b) Schulte, K. E.; Reisch, J.; 33 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Walker, H. Chem. Ber. 1965, 98, 98-103. (c) Chalk, A. J. Tetrahedron lett. 1972, 33, 3487-3490. (d) Lavallo, V.; Frey, G. D.; Donnadieu, B.; Soleilhavoup, M.; Bertrand, G. Angew. Chem., Int. Ed. 2008, 47, 5224-5228. (e) Zheng, Q.; Hua, R. Tetrahedron Lett. 2010, 51, 4512-4514. (7) Megiatto, J. D.; Schuster, D. I. Org. Lett. 2011, 13, 1808-1811. (8) (a) Movsisyan, L. D.; Kondratuk, D. V.; Franz, M.; Thompson, A. L.; Tykwinski, R. R.; Anderson, H. L. Org. Lett. 2012, 14, 3424-3426. (b) Weisbach, N.; Baranová, Z.; Gauthier, S.; Reibenspies, J. H.; Gladysz, J. A. Chem. Commun., 2012, 48, 7562-7564. (c) Sahnoune, H.; Baranová, Z.; Bhuvanesh, N.; Gladysz, J. A.; Halet, J-F. Organometallics 2013, 32, 6360-6367. (d) Movsisyan, L. D.; Peeks, M. D.; Greetham, G. M.; Towrie, M.; Thompson, A. L. Parker, A. W.; Anderson, H. L. J. Am. Chem. Soc. 2014, 136, 17996-18008. (9) The reaction time was set to 2 h to compare the rate of the reactions. (10) (a) Thordarson, P.; Bijsterveld, E. J. A.; Rowan, A. E.; Nolte, R. J. M. Nature (London, U.K.) 2003, 424, 915-918. (b) Ramos, P. H.; Coumans, R. G. E.; Deutman, A. B. C.; Smits, J. M. M.; de Gelder, R.; Elemans, J. A. A. W.; Nolte, R. J. M.; Rowan, A. E. J. Am. Chem. Soc. 2007, 129, 5699-5702. (c) Miyagawa, N.; Watanabe, M.; Matsuyama, T.; Koyama, Y.; Moriuchi, T.; Hirao, T.; Furusho, Y.; Takata, T. Chem. Commun. 2010, 46, 1920-1922. (d) 34 ACS Paragon Plus Environment

Page 34 of 36

Page 35 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Blanco, V.; Leigh, D. A.; Marcos, V.; Morales-Serna, J.; Nussbaumer, A. J. J. Am. Chem. Soc. 2014, 136, 4905-4908. (e) Hoekman, S.; Kitching, M. O.; Leigh, D. A.; Papmeyer, M.; Roke, D. J. Am. Chem. Soc. 2015, 137, 7656-7659. (11) The reaction completed in 7 h, and no progress of the reaction was observed thereafter. The presence of 1 in the reaction mixture, however, made the purification of 3d difficult. The remaining starting material (1) decomposed after heating the reaction mixture for 120 h, and 3d was isolated in pure form. (12) Hayashi, R.; Wakatsuki, K.; Yamasaki, R.; Mutoh, Y.; Kasama, T.; Saito, S. Chem. Commun. 2014, 50, 204-206. (13) See Supporting Information. (14) The coalescence temperature, difference of the chemical shifts, and the coupling constant of the signals were used to calculate the activation energy. For details, see, Oki, M. Applications of Dynamic NMR Spectroscopy to Organic Chemistry; VCH: Deerfield Beach, 1985; pp 1-40. (15) Saito, S.; Ohkubo, T.; Yamazaki, Y.; Yokoyama, T.; Mutoh, Y.; Yamasaki, R.; Kasama, T.; Bull. Chem. Soc. Jpn. 2015, 88, 1323-1330. (16) Lüer, I.; Rissaanen, K.; Vögtle, F. Chem. Ber. 1992, 125, 1873-1880. 35 ACS Paragon Plus Environment


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(17) Beruben, D.; Marek, I.; Normant, J. F.; Platzert, N. J. Org. Chem. 1995, 60, 2488-2501. (18) Ahmed, M. S. M.; Mori, A. Tetrahedron, 2004, 60, 9977-9982. (19) Basfold, F. R. J. Chem. Soc. 1937, 1440-1443. (20) Xu, H.; Wolf, C. Chem. Commun. 2009, 3035-3037. (21) Yamashita, Y.; Mutoh, Y.; Yamasaki, R.; Kasama, T.; Saito, S. Chem. Eur. J. 2015, 21, 2139-2145.


Page 36 of 36

Synthesis and Shuttling Behavior of [2] Rotaxanes with a Pyrrole Moiety

Recommend Documents