Transition-Metal Triggered High-Efficiency Lithium Ion Storage via

Subscriber access provided by University of Leicester

Article

Transition-Metal Triggered High-Efficiency Lithium Ion Storage via Coordination Interactions with Redox-Active Croconate in One-Dimensional Metal-Organic Anode Materials Lin Zhang, Fangyi Cheng, Wei Shi, Jun Chen, and Peng Cheng ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b18758 • Publication Date (Web): 31 Jan 2018 Downloaded from http://pubs.acs.org on January 31, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Transition-Metal Triggered High-Efficiency Lithium Ion Storage via Coordination Interactions with Redox-Active Croconate in One-Dimensional MetalOrganic Anode Materials Lin Zhang,† Fangyi Cheng,†,‡,§ Wei Shi,*,†,‡,§ Jun Chen,†,‡,§ and Peng Cheng,*,†,‡,§ †

College of Chemistry, Key Laboratory of Advanced Energy Materials Chemistry (MOE),

Nankai University, Tianjin 300071, China ‡

State Key Laboratory of Elemento-Organic Chemistry, Nankai University, Tianjin 300071,

China §

Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin

300071, China

KEYWORDS: Coordination polymers; one-dimensional; redox active; croconate; transition metal ions; synergistical redox reactions.

ABSTRACT: Coordination polymers (CPs) have powerful competence as anode materials for lithium-ion batteries (LIBs) owing to their structural diversity, tunable functionality and facile and mild synthetic conditions. Here we show that two isostructural one-dimensional croconatebased CPs, namely [M(C5O5)(H2O)3]n (M = Mn for 1 and Co for 2; C5O52- = croconate dianion),

ACS Paragon Plus Environment

1

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 29

can work as high-performance electrode materials for rechargeable LIBs. By means of the coordination between the redox active transition metal ion and the ligand, the anode materials were stable in electrolyte and showed high capacities, impressive rate capabilities, and excellent cycling performance during the discharging/charging processes. The chain-based supramolecular structures of the CPs also make them stand out from a crowd of porous three-dimensional molecular materials due to their free channels between the chains for lithium-ion diffusion. When tested in a voltage window of 0.01−2.4 V at 100 mA g-1, CPs 1 and 2 demonstrated high discharge specific capacities of 729 and 741 mA h g-1, respectively. The synergistical redox reactions on both metal centers and the organic moieties play a crucial role for the high electrochemical performance of CPs 1 and 2. After undergoing elevated discharging/charging rates to 2 A g-1, the capabilities could finally recover as the initial stage when the current rate was back to 100 mA g-1, indicating excellent rate performance and outstanding cycling stabilities of the materials.

1. Introduction Electrochemical energy storage (EES) technology has considerably changed our life for their various applications in portable electronic products, electric vehicles, medical instruments, and aerospace equipments.1-3 Among various EES devices, lithium-ion batteries (LIBs) is one of the advanced devices because they are endowed with high energy density and operation potential, light mass, and low environmental impact.4-6 Currently, traditional LIBs with LiCoO2/graphite couple can hardly meet the increasing requirements of the new electronic devices.7-9 Among the alternative advanced electrode materials, organic materials, especially organic carbonyl compounds, have been highlighted for their high capacities owing to the multi-electron transfer processes during the electrochemical redox reactions.10-12 A formidable challenge for organic


2

Page 3 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


carbonyl electrode materials is their dissolution in aprotic electrolyte, which leads to capacity decay.13,14 To conquer this problem, a promising strategy is the introduction of organic carbonyl salts, which can maintain the high capacities from the organic components and alleviate solubility in electrolyte due to the formation of ionic bonds. Up to now, a series of organic carbonyl salts processing high theoretic capacities have been studied for rechargeable LIBs.15,16 However, the solubility is still a target issue that needs to be resolved. In addition, the redox-inert metal ions in the organic carbonyl salts will restrict the lithium-ion insertion numbers and hence prevent the further enhancement of theoretical capacities. Meanwhile, the volume change during lithiation/delithiation also limits the power density and cycling stability of these electrode materials upon continuous discharging/charging processes. Metal-organic frameworks (MOFs), constructed by inorganic nodes and organic linkers, are new generation of crystalline materials.17,18 Owing to their hybrid compositions and variable structures, MOFs have shown promising applications in gas storage19 and separation,20 luminescence,21 magnetism,22 catalysis,23 and so on.24 Recently, MOFs have shown great potential as promising electrode materials.25 Except the ligand, the redox-active metal center can accommodate multiple electrons.26-29 Moreover, the structural flexibility can buffer the large volume change during repeated discharging/charging processes, and hence overcoming the degradation problems caused by the volume change.30,31 The challenges of classic MOFs as electrode materials are their limited channel for lithium-ion diffusion and obstruction of the pore window by organic solvents.32 To solve these issues, an alternative way is the application of onedimensional coordination polymers (CPs) as electrode materials. The coordination chains are linked by weak hydrogen bonds or π···π stacking interactions rather than strong covalent bonds,


3


Page 4 of 29

which can provide adjustable space between the chains and benefit rapid diffusion of lithium ions, allowing the materials to approach their maximum potential capacities.32,33 Among various organic carbonyl salts, Na2C5O5, has the potential as a high-performance material for LIBs due to the lithium enolization reaction at the polycarbonyl oxygens.16 However, in experiment, it only displayed a low specific capacity due to the solubility in electrolyte. Chemically, C5O52- can act as bridging ligand for the construction of versatile CPs,3436

which have been studied for the magnetism35 and ferroelectrics,36 but there is no report on the

comprehensive investigation of croconate-based CPs as electrode materials for LIBs. To achieve a practical high capacity with C5O52-, the introduction of transition metal ions to coordinate with C5O52- is a promising way because the formation of coordination bonds can not only increase the stability of the material in electrolyte but also construct specific channels for lithium ion diffusion. In addition, the incorporation of redox active transition metal ion and C5O52- can also contribute to an enhanced electrochemical performance in comparison with Na2C5O5, in which Na(I) ion is redox-inert. In this contribution, two isostructural transition-metal CPs of [M(C5O5)(H2O)3]n (M = Mn for and Co for 2; C5O52- = croconate dianion) with chain structures were obtained by adopting a modified facile slow evaporation method at room temperature. CPs 1 and 2 were studied as anode materials of LIBs. The coordination of the C5O52- with transition-metal ions can greatly benefit the stability in electrolyte and contribute to the cycle performance during the discharging/charging processes. CPs 1 and 2 with Mn(II) and Co(II) centers demonstrated high discharge specific capacities of 729 mA h g-1 and 741 mA h g-1 at 100 mA g-1 after 140 cycles. X-ray photoelectron spectroscopy (XPS) study demonstrated that the involvement of both metal centers and the organic moieties in lithium-ion storage is responsible for the high specific


4

Page 5 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


capacities of CPs 1 and 2. Importantly, both the CPs exhibited high reversibility, excellent rate performance, and long-term cycling stability in comparison with conventional Na2C5O5 electrode as expected when used as anode materials for LIBs. 2. Experimental 2.1 Materials and Methods. All raw reagents were commercial and used without further purification. Redetermination of the crystal structures of CPs 1 and 2 were obtained by the single-crystal X-ray diffraction with an Agilent Technologies Supernova diffractometer using graphite-monochromatized Mo-Kα radiation. Elemental analyses (EA) of C, H and N were performed by a Perkin Elmer 2400-II CHNS/O analyzer. Thermogravimetric analyses (TGA) were performed under nitrogen atmosphere in the temperature range of 40−800 °C at the heating rate of 10 °C min-1 using a Labsys NETZSCH TG 209 Setaram apparatus. Powder X-ray diffraction (PXRD) patterns were measured at the scanning rate of 5 ° min-1 in the 2θ range 3−50 ° on a Rigaku Ultima IV instrument using a Cu-Kα radiation. Fourier transform infrared spectra (FTIR) were recorded on a Bruker ALPHA-T infrared spectrophotometer in the wavenumber range of 400−4000 cm-1. Morphologies were obtained by scanning electron microscopy (SEM) on a ZEISS MERLIN Compact (Field Emission) scanning electron microscope. X-ray photoelectron spectroscopy (XPS) were conducted on a Kratos AXIS Ultra DLD spectrometer using an Al-Kα X-ray source. 2.2 Electrochemical Measurements. 2032 coin cells were assembled to test the electrochemical performances of the CPs and Na2C5O5. 70 wt% of the electrode active materials, 20 wt% ketjen black, and 10 wt% polyvinylidene fluoride (PVDF) were dispersed in N-methyl-2-pyrrolidone (NMP) uniformly to form slurry. The slurry was coated on copper foil and dried at 80 °C for 12 h before punched into


5


Page 6 of 29

the discs of 12 mm in diameter and used as electrode. The active material loading is 1.0 mg cm-2. During the fabrication of the coin cells, Li metal was used as counter and reference electrode, 1 M LiPF6 in ethylene carbonate/diethylcarbonate (EC/DEC, 1:1 in volume) as electrolyte and a polypropylene film as separator. The operation was carried out in an argon filled glovebox where the water and oxygen levels were both below 0.1 ppm. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) of the cells were carried out by a PARSTAT 4000 electrochemical workstation. Gavanostatic charge-discharge measurements were conducted on a LAND battery station at 298 K in the range of 0.01−2.4 V. 2.3 Syntheses of CPs 1 and 2. A mixture of MnCl2·4H2O (19.7 mg, 0.1 mmol) and disodium croconate (Na2C5O5) (9.3 mg, 0.05 mmol) in 3 mL of deionized water after slow evaporation at room temperature generated dark green crystals of CP 1. CP 2 were prepared in the same method as that of 1 except that Co(NO3)2·6H2O (29.1 mg, 0.1 mmol) were used as starting materials. CP 2 formed as purple crystals. The products were obtained with yields of 70% and 75% for CPs 1 and 2, respectively, based on Na2C5O5. Anal. Calcd. for C5H6MnO8 1: C, 24.11; H, 2.43. Found: C, 24.15; H, 2.46. Calcd. for C5H6CoO8 2: C, 23.73; H, 2.39. Found: C, 23.70; H, 2.41. 3. Results and discussion The isostructural CPs 1 and 2 were obtained in a facile slow evaporation method at room temperature instead of the original procedure initially introduced by West in 1963.37 Preliminary studies on the structures of the CPs were carried out by Fabretti and Fabre.38,39 Single-crystal Xray diffraction showed that CPs 1 and 2 crystalized in orthorhombic space group Pbca (Table S1). The crystal structure of CP 1 as an example is described. Each unit cell of 1 has one crystalgraphically independent metal ion, one C5O52- anion and three coordinated H2O molecules


6

Page 7 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(Figure la). Each metal center is coordinated by three oxygen atoms from two C5O52- anions and three oxygen atoms from three H2O molecules to form a distorted octahedron, with Mn-O bond lengths ranging from 2.121(4) to 2.254(2) Å (Table S2). Each C5O52- anion is chelated through two oxygen atoms to one metal ion and singly-coordinated to another metal ion, forming a chain structure and leaving two of its five oxygen atoms uncoordinated. In CP 1, the shortest intrachain Mn⋅⋅⋅Mn distance is 8.145(8) Å. Adjacent chains are connected through the interchain O-H⋅⋅⋅O hydrogen bonds (Table S3) to form a three-dimensional supramolecular architecture with closest interchain Mn⋅⋅⋅Mn distance of 5.436(1) Å (Figure lb). The formation of the supramolecular networks based on the coordination chains connected via hydrogen bonds can increase the stability and make the materials unsolvable in electrolyte. Dissolution tests (Figure lc) and PXRD patterns (Figure S1) of the two CPs after soaked in electrolyte for ten days suggest that they are highly stable in electrolyte. PXRD for the isostructural CPs 1 and 2 are similar and nearly identical to the simulated one from the single crystal structure of CP 1, indicative of the pure solid state phases (Figure S2). In TGA, the CPs exhibit obvious weight loss of 21.59% and 21.85% from 120 to 280 °C for CPs 1 and 2, respectively, which correspond to the release of three coordinated water molecules (calcd 21.70% and 21.36%). And then CPs 1 and 2 show no weight loss until the framework starts to collapse at 340 °C (Figure S3). In FTIR spectra (Figure S4), the positions and intensities of the peaks are nearly identical for the two CPs. A broad and strong band from 3000 to 3400 cm-1 can be ascribed to the OH stretching vibrations of the water molecules while the νHOH bending affords a strong absorption at 1627 cm-1.37 These OH bands disappear in the FTIR spectrum of anhydrous Na2C5O5. The band at 1723 cm-1 is attributed to the non-coordinated C=O group. The IR peak of coordinated C-O group is at 1677 cm-1. The broad and intense absorption located in


7


Page 8 of 29

the 1300−1600 cm-1 range is characteristic of the C5O52- anion, which can be assigned to vibrational modes of a mixture of C-O and C-C stretching motions.40 Both CPs exhibit several absorptions between 400 and 570 cm-1, which may be attributed to the νM-O stretching, suggesting the formation of the coordination bonds of transition metal ions and C5O52- anions.41 The isostructural CPs 1 and 2 allow us to study if different metal centers can influence the lithium-ion storage performance. Two-electrode 2032 coin-cell batteries with Li metal counter electrodes were assembled and galvanostatic charge-discharge measurements were performed. The voltage window 0.01−2.4 V and current density of 100 mA g-1 were selected as the operation condition.42,43 For CP 1, two plateaus are clearly presented in the discharge profile in the voltage ranges of 0.72–1.21 and 0.25–0.72 V, indicating two distinct electron-uptake processes (Figure 2a). The initial discharge capacity of 1 is 2490 mA h g-1. It decreases to 800 mA h g-1 in the second cycle. The initio capacity loss is mainly from the formation of solid electrolyte interphase (SEI) layer and interfacial lithium storage.44,45 In addition, the reaction of coordination water molecules within CP 1 with lithium to form Li2O is also responsible for the first cycle irreversible capacity loss.46,47 From the second cycle, with the formation of SEI layers and the disappearance of side reactions, no apparent capacity loss is found and the Coulombic efficiency tend to rise and remains constant at almost 100% in the following cycles. The galvanostatic charge-discharge curves show rather symmetrical voltage profiles for charge and discharge processes in the subsequent cycles. In addition, the ketjen black conducting additive is about 20 wt% of the total loading mass and contributes a negligible capacity (Figure S5). The isostructural CP 2 was also studied as anode material. Similar to that of CP 1, discharge profile of CP 2 in the first cycle shows two obvious plateaus located at 1.10−1.38 and 0.51−1.10 V (Figure 2b). The


8

Page 9 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


initial discharge capacity of 2 is 2024 mA h g-1, and it decreases to 974 mA h g-1 in the second cycle and remains at 711 mA h g-1 at the 50th cycle. The cycling performance of the CPs were also evaluated at current density of 100 mA g-1. CPs 1 and 2 retain the capacities of 729 and 741 mA h g-1 after repetitive discharging/charging to 140 cycles (Figures 2c and 2d). The higher capacities of CPs 1 and 2 suggest a synergistic contribution from the metal centers and organic ligands. In addition, both the CPs exhibit excellent cycle stabilities. The achieved 99.4% and 99.9% Coulombic efficiency for CPs 1 and 2 upon cycling suggest that the SEI layers obtained in the first cycle are extremely stable and there are no apparent side reactions.44,45 To further investigate the cycling stabilities and rate capacities, we studied the rate performance of the CPs. Discharge and charge cycles at various current densities (from 100 to 2000 mA g-1) are shown in Figures 2e and 2f. CPs 1 and 2 show very close discharge capacities of 783 and 740 mA h g-1 at 100 mA g-1. With elevated current rates to 200, 500, and 1000 mA g-1, discharge capacities of 738, 608, 458 mA h g-1 for CP 1 and 677, 528, 409 mA h g-1 for CP 2 are achieved, respectively. Even at a high rate of 2 A g-1, the capacities can be maintained at 317 and 341 mA h g-1, which are comparable to the theoretical capacity of graphite (372 mA h g-1).46 When the current rate was back to 100 mA g-1, the electrodes can finally resume their capacities at the initial stage, indicating that the anode materials remain stable during the rate cycling process. More strikingly, when tested at 500 mA g-1, stable lithiation capacities of 680 and 476 mA h g-1 after 400 cycles are still obtained, along with a steady Coulombic efficiency near 100% (Figure S6). Based on the above results, the two CPs are high-performance anode materials in comparison with MOF-based anode materials (Table 1).43,47-59


9


Page 10 of 29

The electrochemical property of Na2C5O5 as anode material was also investigated to further understand the electrochemical mechanism of CPs 1 and 2. As shown in Figure S7a, the single plateau at 0.75−0.95 V can be assigned to the electron uptake step of carbonyl groups during the discharging/charging processes. The galvanostatic charge-discharge profile exhibits a relatively low discharge capacity of 775 mA h g-1 in the first cycle. The capacity dives to 202 mA h g-1 in the second cycle owing to the low initial Coulombic efficiency of 19.6%. With respect to the cycle performance, the discharge capacity remains at 176 mA h g-1 and the Coulombic efficiency appears to be 96.2% after 50 cycles (Figure S7b). The reversible capacities measured are 172, 135, 105, 77 and 58 mA h g-1 with elevated current rates from 100 mA g-1 to 200, 500, 1000 and 2000 mA g-1 (Figure S7c). The poor electrochemical performance of Na2C5O5 in this LIB, in comparison with that of CPs 1 and 2, suggests that the introduction of the coordination bond with transition metal ion is of great importance for the enhanced electrochemical properties. To explore the reason for the high electrochemical performance of the CPs, electrochemical impedance spectroscopy (EIS) of the anodes in the fresh state and after 140 discharge-charge cycles are also presented (Figure S8). CP 1 has a much smaller semicircle diameter than that of CP 2 in the fresh state, suggesting lower contact and charge-transfer resistance than 2. The semicircle diameters of the two CPs significantly decrease after 140 cycles, indicating elevated electron transport and Li+ diffusion speed upon cycling. The EIS results are consistent with the lithium-storage behaviors of the CPs during the electrochemical lithiation and delithiation reactions. The cyclic voltammetry (CV) analyses were also performed to study the Li+ intercalation/deintercalation processes of the two CPs. As shown in Figure S9, the remarkable irreversibility in the first cycle can be assigned to the formation of solid electrolyte interphase


10

Page 11 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(SEI) layers.44,45 The CV curves of 1 in the subsequent cycles are almost overlap, indicating a good cyclic stability of 1 during cycling (Figure 3a). Two isolated reversible peaks at 0.32 and 1.10 V correspond to two distinct electron uptake steps and lithium intercalations of Mn2+ ion and carbonyl groups. Accordingly, the oxidation peaks at 1.28 and 1.58 V are ascribed to the associated electron removal and lithium-extraction processes. In comparison, CP 2 undergoes an analogous redox behavior with CP 1. Two oxidation peaks appear at 1.04 and 1.34 V, and two reduction peaks located at 0.63 and 1.23 V for 2 are clearly observed after the first cycle, indicating a similar redox process with 1 (Figure 3b). To further investigate the redox reaction mechanism, ex situ X-ray photoelectron spectroscopy (XPS) measurements of the electrodes before and after the fully discharged states were carried out to track the valence change of metal centers and the chemical bonding state of organic moieties. As shown in Figures 4a and 4b, the distinct peaks located at binding energies of 641.8 and 652.8 eV for Mn 2p and peaks at 781.5 and 798.3 eV for Co 2p are assigned to the characteristic peaks of Mn2+ and Co2+ ions, respectively. After the discharge process, the Mn 2p peaks shift to 640.5 and 651.0 eV, the Co 2p peaks shift to 778.3 and 793.5 eV, indicating the formation of Mn0 and Co0 (Figures 4c and 4d).60 The XPS spectra of C 1s and O 1s were further investigated. The C 1s spectra after discharged are fitted into three peaks at 284.6, 286.4, 289.8 eV for 1 and 284.6, 285.8, 289.6 eV for 2 (Figure S10), which are attributed to the characteristic peaks of the C=C bonds of the five-membered ring, C−C single bonds of the carbonyl groups and enol structures.61 The transformation of carbonyl into the enol structures after full discharge confirms the electron uptake process of organic moieties. In the O 1s spectra, the two peaks at 529.6 and 531.7 eV for 1 and 530.8 and 528.8 eV for 2 correspond to the lattice oxygen and the Li-O bond during the discharge process (Figure S11).62 The above results suggest that the


11


Page 12 of 29

involvement of cobalt(II) and manganese(II) ions in the redox process for CPs 1 and 2 during the discharging-charging cycles can contribute for the improved capacities. The lithium-ion storage performances of CPs 1 and 2 are similar in terms of the reversible capacities at 100 mA g-1. However, when the current rates were elevated to 200, 500, 1000 and 2000 mA g-1, the reversible capacities of CP 1 are higher than that of 2. CP 1 showed a reversible capacity of 680 mA h g-1 at 500 mA g-1 after 400 galvanostatic discharging/charging cycles, whereas the reversible capacity of 2 at the same condition is 476 mA h g-1 (Figure S6). Thus lithium-ion storage performance of CP 1 is higher than that of 2 at high rates, which may result from the different coordination affinity to ligands and the electrochemical nature of the metal centers. Stability is an important feature of CPs as electrode materials during the discharging/charging processes. To confirm the structural stabilities of the anode materials, the coin cells of the electrodes were disassembled after 10 cycles. The active materials were then peeled off from electrode discs and washed several times with dimethyl carbonate (DMC). Combining the measurements of PXRD, IR, and SEM analyses, we can conclude that the two CPs show great endurance upon the insertion and extraction reactions of Li+ ions in multiple cycles. PXRD analyses and FTIR spectroscopy of the electrode materials at the fully charged (2.4 V) states are well consistent with the pristine CPs (Figure S12 and S13). Moreover, it is clearly demonstrated that the morphologies for the prepared CPs can still be well retained after 10 discharge/charge cycles (Figure 5), indicating that the chain-based supramolecular structures can accommodate the large volume change during delithiation/lithiation processes. We also studied the long-term cycling stabilities of the materials. The PXRD, FTIR and SEM results after fully charged at the 40th cycle stay almost the same with the pristine CPs and the material at 10th cycle (Figures


12

Page 13 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


S14−S16), indicating no apparent changes of crystalline structure and morphology of the samples during long-term cycling. 4. Conclusions In summary, two isostructural one-dimensional transition-metal-croconate CPs were studied as anode materials for rechargeable LIBs. In comparison with Na2C5O5 salt as anode, the CPs showed enhanced electrochemical performance, less solubility in electrolyte, as well as the tolerance of the volume change during repeated discharging/charging processes. When evaluated as anode materials for rechargeable LIBs, CPs 1 and 2 exhibit high reversible capacities of 729 and 741 mA h g-1 at the 140th cycle with Coulombic efficiency up to 99.4% and 99.3% at a current density of 100 mA g-1. The nearly 100% Coulombic efficiencies imply the stabilities of the SEI layers and efficient transport of ions and electrons in these anodes. When tested at 500 mA g-1, stable lithiation capacities of 680 and 476 mA h g-1 after 400 cycles are still obtained, confirming endurance upon the insertion and extraction reactions of Li+ ions and long-term cycling stability of CPs 1 and 2 in multiple cycles. Importantly, all the CPs exhibited high reversibility and excellent rate performance. The electrochemical mechanism studies demonstrate that synergistical redox reactions on both metal centers and the organic moieties play a crucial role on the lithium insertion/extraction process and enhanced electrochemical performance. In addition, the chain-based supramolecular structures free of channel size restrictions could also benefit rapid diffusion of lithium ions within the materials, which can further contribute to the improvement of LIB performance. Continuations exploration of novel electrode materials based on low-dimensional CPs is under way in our laboratory.


13


Page 14 of 29

Supporting Information. Additional ﬁgures (Figures S1−S16) of TGA, PXRD, FTIR and XPS for different states of the CPs. Cycling performances of CPs 1 and 2 at high current rates of 500 mA g-1. Electrochemical performance of for Na2C5O5. Impedance plots of CPs 1 and 2 as anodes before and after 140 cycles. Cyclic voltammetry curves of the 1st cycle in the range of 0.01–2.4 V at a scan rate of 0.1 mV s-1. AUTHOR INFORMATION Corresponding Author *E-mail: [email protected]; [email protected] Notes The authors declare no competing financial interest. ACKNOWLEDGMENT This work was supported by the National Natural Science Foundation of China (grant numbers 21622105 and 21421001) and the Ministry of Education of the People’s Republic of China (grant number B12015).


14

Page 15 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


REFERENCES (1) Melot, B. C.; Tarascon, J. M. Design and preparation of materials for advanced electrochemical storage. Acc. Chem. Res. 2013, 46, 1226–1238. (2) Zheng, S. S.; Li, X. R.; Yan, B. Y.; Hu, Q.; Xu, Y. X.; Xiao, X.; Xue, H. G.; Pang, H. Transition-metal (Fe, Co, Ni) based metal-organic frameworks for electrochemical energy storage. Adv. Energy Mater. 2017, 1602733. (3) Goodenough, J. B. Evolution of strategies for modern rechargeable batteries. Acc. Chem. Res. 2012, 46, 1053–1061. (4) Masquelier, C.; Croguennec, L. Polyanionic (phosphates, silicates, sulfates) frameworks as electrode materials for rechargeable Li (or Na) batteries. Chem. Rev. 2013, 113, 6552–6591. (5) Xia, W.; Mahmood, A.; Zou, R. Q.; Xu, Q. Metal-organic frameworks and their derived nanostructures for electrochemical energy storage and conversion. Energy Environ. Sci. 2015, 8, 1837–1866. (6) Wang, L.; Han, Y. Z.; Feng, X.; Zhou, J. W.; Qi, P. F.; Wang, B. Metal-organic frameworks for energy storage: batteries and supercapacitors. Coord. Chem. Rev. 2016, 307, 361–381. (7) Kang, W. P.; Zhang, Y.; Fan, L. L.; Zhang, L. L.; Dai, F. N.; Wang, R. M.; Sun, D. F. Metalorganic framework derived porous hollow Co3O4/N-C polyhedron composite with excellent energy storage capability. ACS Appl. Mater. Interfaces 2017, 9, 10602−10609. (8) Goodenough, J. B.; Kim, Y. Challenges for rechargeable Li batteries. Chem. Mater. 2010, 22, 587–603. (9) Manthiram, A. Materials challenges and opportunities of lithium ion batteries. J. Phys. Chem. Lett. 2011, 2, 176–184.


15


Page 16 of 29

(10) Lee, J.; Kim, H.; Park, M. J. Long-life, high-rate lithium-organic batteries based on naphthoquinone derivatives. Chem. Mater. 2016, 28, 2408−2416. (11) Häupler, B.; Wild, A.; Schubert, U. S. Carbonyls: powerful organic materials for secondary batteries. Adv. Energy Mater. 2015, 5, 1402034. (12) Aubrey, M. L.; Long, J. R. A dual-ion battery cathode via oxidative insertion of anions in a metal-organic framework. J. Am. Chem. Soc. 2015, 137, 13594−13602. (13) Schon, T. B.; McAllister, B. T.; Li, P. F.; Seferos, D. S. The rise of organic electrode materials for energy storage. Chem. Soc. Rev. 2016, 45, 6345–6404. (14) Zhao, Q.; Wang, J. B.; Lu, Y.; Li, Y. X.; Liang, G. X.; Chen, J. Oxocarbon salts for fast rechargeable batteries. Angew. Chem. Int. Ed. 2016, 55, 12528–12532. (15) Kim, H.; Seo, D. H.; Yoon, G.; Goddard, W. A.; Lee, Y. S.; Yoon, W. S.; Kang, K. The reaction mechanism and capacity degradation model in lithium insertion organic cathodes, Li2C6O6, using combined experimental and first principle studies. J. Phys. Chem. Lett. 2014, 5, 3086−3092. (16) Luo, C.; Huang, R. M.; Kevorkyants, R.; Pavanello, M.; He, H. X.; Wang, C. S. Selfassembled organic nanowires for high power density lithium ion batteries. Nano Lett. 2014, 14, 1596–1602. (17) James, S. L. Metal-organic frameworks. Chem. Soc. Rev. 2003, 32, 276−288. (18) Furukawa, H.; Cordova, K. E.; O’Keeffe, M.; Yaghi, O. M. The chemistry and applications of metal-organic frameworks. Science 2013, 341, 1230444. (19) Zhou, H. C.; Long, J. R.; Yaghi, O. M. Introduction to metal-organic frameworks. Chem. Rev. 2012, 112, 673−674.


16

Page 17 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(20) Li, J. R.; Sculley, J.; Zhou, H. C. Metal-organic frameworks for separations. Chem. Rev. 2012, 112, 869−932. (21) Cui, Y. J.; Yue, Y. F.; Qian, G. D.; Chen, B. L. Luminescent functional metal-organic frameworks. Chem. Rev. 2012, 112, 1126−1162. (22) Liu, K.; Zhang, X. J.; Meng, X. X.; Shi, W.; Cheng, P.; Powell, A. K. Constraining the coordination geometries of lanthanide centers and magnetic building blocks in frameworks: a new strategy for molecular nanomagnets. Chem. Soc. Rev. 2016, 45, 2423−2439. (23) Cohen, S. M. Postsynthetic methods for the functionalization of metal-organic frameworks. Chem. Rev. 2012, 112, 970−1000. (24) Zhang, H. B.; Nai, J. W.; Yu, L.; Lou, X. W. Metal-organic-framework-based materials as platforms for renewable energy and environmental applications. Joule 2017, 1, 77−107. (25) Wu, H. B.; Lou, X. W. Metal-organic frameworks and their derived materials for electrochemical energy storage and conversion: promises and challenges. Sci. Adv. 2017, 3, eaap9252. (26) Zhang, Z. Y.; Yoshikawa, H.; Awaga, K. Monitoring the solid-state electrochemistry of Cu(2,7-AQDC) (AQDC = anthraquinone dicarboxylate) in a lithium battery: coexistence of metal and ligand redox activities in a metal-organic framework. J. Am. Chem. Soc. 2014, 136, 16112−16115. (27) Shen, L. S.; Song, H. W.; Wang, C. X. Metal-organic frameworks triggered high-efficiency Li storage in Fe-based polyhedral nanorods for lithium-ion batteries. Electrochimica Acta 2017, 235, 595–603. (28) Lee, H. H.; Park, I. H.; Kim, S.; Lee, E.; Ju, H.; Jung, J. H.; Ikeda, M.; Habata, Y.; Lee, S. S. Anion exchange coupled with the reduction and dimerisation of a copper(II) nitrate complex


17


Page 18 of 29

of tripyridyl dithioether via a single-crystal-to-single-crystal transformation. Chem. Sci. 2017, 8, 2592–2596. (29) Shin, J. W.; Kim, M.; Cirera, J.; Chen, S.; Halder, G. J.; Yersak, T. A.; Paesani, F.; Cohen, S. M.; Meng, Y. S. MIL-101(Fe) as a lithium-ion battery electrode material: a relaxation and intercalation mechanism during lithium insertion. J. Mater. Chem. A 2015, 3, 4738−4744. (30) Palacin, M. R.; de uibert, A. Why do batteries fail? Science 2016, 351, 1253292. (31) An, T. C.; Wang, Y. H.; Tang, J.; Wang, Y.; Zhang, L. J.; Zheng, G. F. A flexible ligandbased wavy layjered metal-organic framework for lithium-ion storage. J. Colloid Interface Sci. 2015, 445, 320−325. (32) Li, G. H.; Yang, H.; Li, F. C.; Cheng, F. Y.; Shi, W.; Chen, J.; Cheng, P. A coordination chemistry approach for lithium-ion batteries: the coexistence of metal and ligand redox activities in a one-dimensional metal-organic material. Inorg. Chem. 2016, 55, 4935−4940. (33) Song, H. W.; Shen, L. S.; Wang, J.; Wang, C. X. Reversible lithiation-delithiation chemistry in cobalt based metal organic framework nanowire electrode engineering for advanced lithiumion batteries. J. Mater. Chem. A 2016, 4, 15411−15419. (34) Wang, C. C.; Kuo, C. T.; Yang, J. C.; Lee, G. H.; Shih, W. J.; Sheu, H. S. Assemblies of two new metal-organic frameworks constructed from Cd(II) with 2,2′-bipyrimidine and cyclic oxocarbon dianions CnOn2- (n = 4, 5). Cryst. Growth Des. 2007, 7, 1476−1482. (35) Carranza, J.; Brennan, C.; Sletten, J.; Vangdal, B.; Rillema, P.; Lloret, F.; Julve, M. Syntheses, crystal structures and magnetic properties of new oxalato-, croconato- and squaratocontaining copper(II) complexes. New. J. Chem. 2003, 27, 1775−1783. (36) Horiuchi, S.; Tokura, Y. Organic ferroelectrics. Nat. Mater. 2008, 7, 357−366.


18

Page 19 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(37) West, R.; Niu, H. Y. New aromatic anions. VI. Complexes of croconate ion with some divalent and trivalent metals. J. Am. Chem. Soc. 1963, 85, 2586–2588. (38) Cornia, A.; Fabretti, A. C.; Giusti A. Molecular structure and magnetic properties of copper(II), manganese(II) and iron(II) croconate tri-hydrate. Inorg. Chim. Acta 1993, 212, 87– 94. (39) Dumestre, F.; Soula, B.; Galibert, A. M.; Fabre, P. L.; Bernardinelli, G.; Donnadieu, B.; Castan, P. Synthesis and characterization of cobalt(II) complexes of croconate and dicyanomethylene-substituted derivatives. J. Chem. Soc., Dalton Trans. 1998, 4131–4137. (40) Deguenon, D.; Bernardinelli, G.; Tuchagues, J. P.; Castan, P. Molecular crystal structure and magnetic properties of (croconato)- and (oxalato)manganese(II) complexes. Inorg. Chem. 1990, 29, 3031−3037. (41) Nakamoto, K. Infrared and raman spectra of inorganic and coordination compounds, 4th ed.; Wiley-Interscience: New York, 1982. (42) Dong, C. F.; Xu, L. Q. Cobalt- and cadmium-based metal-organic frameworks as highperformance anodes for sodium ion batteries and lithium ion batteries. ACS Appl. Mater. Interfaces 2017, 9, 7160−7168. (43) Maiti, S.; Pramanik, A.; Manju, U.; Mahanty, S. Reversible lithium storage in manganese 1,3,5-benzenetricarboxylate metal-organic framework with high capacity and rate performance. ACS Appl. Mater. Interfaces 2015, 7, 16357−16363. (44) Sahay, R.; Kumar, P. S.; Aravindan, V.; Sundaramurthy, J.; Ling, W. C.; Mhaisalkar, S. G.; Ramakrishna, S.; Madhavi, S. High aspect ratio electrospun CuO nanofibers as anode material for lithium-ion batteries with superior cycleability. J. Phys. Chem. C 2012, 116, 18087−18092.


19


Page 20 of 29

(45) Qin, J.; He, C.; Zhao, N.; Wang, Z.; Shi, C.; Liu, E. Z.; Li, J. Graphene networks anchored with Sn@graphene as lithium ion battery anode. ACS Nano 2014, 8, 1728−1738. (46) Yoshio, M.; Wang, H. Y.; Fukuda, K. J. Spherical carbon-coated natural graphite as a lithium-ion battery-anode material. Angew. Chem., Int. Ed. 2003, 35, 4203−4206. (47) Li, X. X.; Cheng, F. Y.; Zhang, S. N.; Chen, J. Shape-controlled synthesis and lithiumstorage study of metal-organic frameworks Zn4O (1,3,5-benzenetribenzoate)2. J. Power Sources 2006, 160, 542–547. (48) Li, C.; Lou, X. B.; Shen, M.; Hu, X. S.; Guo, Z.; Wang, Y.; Hu, B. W.; Chen, Q. High anodic performance of Co 1,3,5-benzenetricarboxylate coordination polymers for Li-ion battery. ACS Appl. Mater. Interfaces 2016, 8, 15352−15360. (49) Gou, L.; Hao, L. M.; Shi, Y. X.; Ma, S. L.; Fan, X. Y.; Xu, L.; Li, D. L.; Wang, K. One-pot synthesis of a metal-organic framework as an anode for Li-ion batteries with improved capacity and cycling stability. J. Solid State Chem. 2014, 210, 121–124. (50) Saravanan, K.; Nagarathinam, M.; Balaya, P.; Vittal, J. J. Lithium storage in a metal organic framework with diamondoid topology – a case study on metal formats. J. Mater. Chem. 2010, 20, 8329–8335. (51) Wang, L. P.; Zhao, M. J.; Qiu, J. L.; Gao, P.; Xue, J.; Li, J. Z. Metal organic frameworkderived cobalt dicarboxylate as a high capacity anode material for lithium-ion batteries. Energy Technol. 2017, 5, 634−642. (52) Hu, H. P.; Lou, X. B.; Li, C.; Hu, X. S.; Li, T.; Chen, Q.; Shen, M.; Hu, B. W. A thermally activated manganese 1,4-benzenedicarboxylate metal organic framework with high anodic capability for Li-ion batteries. New J. Chem. 2016, 40, 9746–9752.


20

Page 21 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


(53) Liu, Q.; Yu, L. L.; Wang, Y.; Ji, Y. Z.; Horvat, J.; Cheng, M. L.; Jia, X. Y.; Wang, G. X. Manganese-based layered coordination polymer: synthesis, structural characterization, magnetic property, and electrochemical performance in lithium-ion batteries. Inorg. Chem. 2013, 52, 2817−2822. (54) Shi, C. D.; Xia, Q. H.; Xue, X.; Liu, Q.; Liu, H. J. Synthesis of cobalt-based layered coordination polymer nanosheets and their application in lithium-ion batteries as anode materials. RSC Adv. 2016, 6, 4442–4447. (55) Zhang, Y.; Niu, Y. B.; Liu, T.; Li, Y. T.; Wang, M. Q.; Hou, J. K.; Xu, M. W. A nickelbased metal-organic framework: a novel optimized anode material for Li-ion batteries. Mater. Lett. 2015, 161, 712–715. (56) Lin, X. M.; Niu, J. L.; Lin, J.; Wei, L. M.; Hu, L.; Zhang, G.; Cai, Y. P. Lithium-ion-battery anode materials with improved capacity from a metal-organic framework. Inorg. Chem. 2016, 55, 8244−8247. (57) Maiti, S.; Pramanik, A.; Manju U.; Mahanty, S. Cu3(1,3,5-benzenetricarboxylate)2 metalorganic framework: a promising anode material for lithium-ioMn battery. Microporous Mesoporous Mater. 2016, 226, 353–359. (58) Fei, H. L.; Liu, X.; Li, Z. W.; Feng, W. J. Metal dicarboxylates: new anode materials for lithium-ion batteries with good cycling performance. Dalton Trans. 2015, 44, 9909–9914. (59) Gong, T.; Lou, X. B.; Gao, E. Q.; Hu, B. W. Pillared-layer metal-organic frameworks for improved lithium-ion storage performance. ACS Appl. Mater. Interfaces 2017, 9, 21839−21847. (60) Wagner, C. D.; Riggs, W. M.; Davis, L. E.; Moulder, J. F.; Muilenberg, G. E. Handbook of X-ray photoelectron spectroscopy; PerkinElmer: Waltham, MA, 197 8.


21


Page 22 of 29

(61) Beamson, G.; Briggs, D. High resolution XPS of organic polymers: the Scienta ESCA300 database; Wiley: Chichester, UK, 1992. (62) Marco, J. F.; Gancedo, J. R.; Gracia, M.; Gautier, J. L.; Ríos, E.; Berry, F. J. Characterization of the nickel cobaltite, NiCo2O4, prepared by several methods: an XRD, XANES,

EXAFS,

and

XPS

study.

J.

Solid

State


Chem.,

2000,

153,

74−81.

22

Page 23 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Figure 1. (a) The one-dimensional structure. The metal, C and O atoms are denoted by turquoise, gray and red balls, respectively. (b) The supramolecular networks formed via the connection of the chains by hydrogen bonds. Green dotted lines indicate O-H···O hydrogen bonds. (c) Dissolution tests of the CPs in electrolyte for 10 days, indicative of the high stabilities of CPs 1 and 2 in electrolyte.


23


Page 24 of 29

Figure 2. Charge-discharge curves at 100 mA g-1 (a and b), cycling performance and Coulombic efficiency over 140 cycles (c and d), and rate performance at different current densities (e and f) for CPs 1 and 2.


24

Page 25 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Table 1 Selected MOFs and CPs 1-2 as anode materials for LIBs. MOFs and our CPs

Structure

Capacity (mA h g-1) / current rate (mA g-1)

Cycle number

Voltage (V)

Refs.

MOF-177

3D

110 / 50

2

0.1-1.6

47

CoBTC-EtOH

3D

856 / 100

100

0.01-3

48

Co2(OH)2BDC

3D

650 / 100

50

0.02-3

49

Zn3(HCOO)6

2D

560 / 60

60

0.01-3

50

Co3(HCOO)6

2D

410 / 60

60

0.005-3

50

[Co(C8H4O4)4]n

2D

700 / 60

100

0.005-2.8

51

Mn-BTC

3D

694 / 100

100

0.01-2

43

Mn-BDC

3D

974 / 100

100

0.01-3

52

Mn-LCP

2D

390 / 50

50

0.1-3

53

Co-LCP

2D

545 / 50

50

0.1-3

54

Ni-MOF

2D

620 / 100

100

0.01-3

55

[Cd(HTCPPA)·2H2O]n

3D

302 / 100

100

0.01-3

56

Cu3(BTC)2

3D

474 / 383

50

0.05-3

57

Mn(3,5-PDC) 2H2O

2D

554 / 100

240

0.05-3

58

Mn(2,5-FDC) 3H2O

2D

503 / 300

326

0.05-3

58

[Co3(L1)(N3)4]

3D

580 / 100

200

0.01-3

59

[Mn2(L1)(N3)2(H2O)2]·3H2O 3D

358 / 100

200

0.01-3

59

[Co4L2(N3)(H2O)2]

3D

595 / 100

200

0.01-3

59

[Mn4L2(N3)6(H2O)2]

3D

595 / 100

200

0.01-3

59

[Mn(C5O5)(H2O)3]n

1D

729 / 100

140

0.01-2.4

This work

[Co(C5O5)(H2O)3]n

1D

741 / 100

140

0.01-2.4

This work


25


Page 26 of 29

Figure 3. Cyclic voltammetry curves (2–4 cycles) in the range 0.01–2.4 V at a scan rate of 0.1 mV s-1 for 1 (a) and 2 (b).


26

Page 27 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


Figure 4. XPS spectra of the two CPs before cycling (a and b) and after fully discharged (c and d).


27


Page 28 of 29

Figure 5. SEM images of CPs 1 and 2 as electrodes before cycling (a and b) and after 10th cycle (c and d).


28

Page 29 of 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60


TOC


29

Transition-Metal Triggered High-Efficiency Lithium Ion Storage via

Recommend Documents