Subscriber access provided by READING UNIV
Communication
Effects of Direct Solvent-Quantum Dot Interaction on the Optical Properties of Colloidal Monolayer WS Quantum Dots 2
Ho Jin, Bongkwan Baek, Doyun Kim, Fanglue Wu, James D. Batteas, Jinwoo Cheon, and Dong Hee Son Nano Lett., Just Accepted Manuscript • DOI: 10.1021/acs.nanolett.7b03381 • Publication Date (Web): 27 Oct 2017 Downloaded from http://pubs.acs.org on October 27, 2017
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Nano Letters is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nano Letters
Effects of Direct Solvent-Quantum Dot Interaction on the Optical Properties of Colloidal Monolayer WS2 Quantum Dots Ho Jin,† Bongkwan Baek,‡,§,|| Doyun Kim,† Fanglue Wu,≠ James D. Batteas,†,≠ Jinwoo Cheon‡,§,|| and Dong Hee Son*,†,‡ †
Department of Chemistry, Texas A&M University, TX 77843, Unites States
≠
Department of Materials Science and Engineering, Texas A&M University, TX 77843, Unites States
‡
Center for Nanomedicine, Institute for Basic Science (IBS), Seoul 03722, Republic of Korea
§
Yonsei-IBS Institute, Yonsei University, Seoul 03722, Republic of Korea
||
Department of Chemistry, Yonsei University, Seoul 03722, Republic of Korea
*E-mail:
[email protected]; Tel: +1-979-458-2990
1 ACS Paragon Plus Environment
Nano Letters
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Abstract Because of the absence of native dangling bonds on the surface of the layered transition metal dichalcogenides (TMDCs), the surface of colloidal quantum dots (QDs) of TMDCs is exposed directly to the solvent environment. Therefore, the optical and electronic properties of TMDCS QDs are expected to have stronger influence from the solvent than usual surfacepassivated QDs due to more direct solvent-QD interaction. Study of such solvent effect has been difficult in colloidal QDs of TMDC due to the large spectroscopic heterogeneity resulting from the heterogeneity of the lateral size or (and) thickness in ensemble. Here, we developed a new synthesis procedure producing the highly uniform colloidal monolayer WS2 QDs exhibiting well-defined photoluminescence (PL) spectrum free from ensemble heterogeneity. Using this newly synthesized monolayer WS2 QDs, we observed the strong influence of the aromatic solvents on the PL energy and intensity of monolayer WS2 QD beyond the simple dielectric screening effect, which is considered to result from the direct electronic interaction between the valance band of the QDs and molecular orbital of the solvent. We also observed the large effect of stacking/separation equilibrium on the PL spectrum dictated by the balance between inter QD and QD-solvent interactions. The new capability to probe the effect of the solvent molecules on the optical properties of colloidal TMDC QDs will be valuable for their applications in various liquid surrounding environments.
KEYWORDS: Colloidal quantum dot, monolayer WS2, transition metal dichalcogenide, solventquantum dot interaction, photoluminescence
2 ACS Paragon Plus Environment
Page 2 of 22
Page 3 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nano Letters
Monolayer and few-layer transition metal dichalcogenide (TMDC) materials attracted much attention recently due to their unique electronic, optical and transport properties resulting from the confinement of charge carriers in 2-dimension (2D).1-7 TMDC nanostructures with controlled thickness have been fabricated typically via chemical vapor deposition or epitaxial growth as a thin film supported on a substrate, which is particularly useful for exploring the properties of 2Dconfined exciton sensitive to the thickness and interlayer interactions. Efforts to create TMDC nanostructures with controlled lateral dimension as well as the thickness have also been made with the prospect of combining the lateral quantum confinement with properties originating from the 2D-confined charge carriers. Such nanostructures were often created in colloidal nanocrystal form employing liquid-phase exfoliation, Li-assisted exfoliation, electrochemical synthesis and hot injection method8-13, while the patterned structure on a substrate was also created via electron beam lithography.14 Because of the dispersability in various liquid media, the colloidal TMDC nanocrystals found applications in various surrounding environments such as imaging in biological systems and catalysis in solution phase,8, 9, 15, 16 analogous to more common colloidal semiconductor QDs.17-20 Unlike in other QDs with dangling bonds on the surface providing the linkage for the ligands, TMDC QDs have no dangling bonds on their basal planes except at possible defect sites and edge. Therefore, the surface of TMDC QDs in solution is directly exposed to the solvent environment without intervention from the surface-bound ligands, although they can be introduced at the defect sites or edge.21-23 Naturally, QD-solvent and inter QD interaction that can modify the electronic and optical properties of the QDs are expected to be stronger in TMDC QDs than those with surface-bound ligands. This is an important issue since the common applications of colloidal QDs utilize the photoluminescence or interfacial charge/energy transfer 3 ACS Paragon Plus Environment
Nano Letters
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 4 of 22
process directly affected by the modification of the electronic structure by the surrounding. So far, understanding the effect of QD-solvent and inter QD interaction on the optical properties in colloidal TMDC QDs has been hampered by the structural (e.g., lateral size and thickness) heterogeneity resulting in the spectroscopic heterogeneity.8,
11, 12
Such heterogeneity of the
ensemble prohibited reliable optical characterization correlated with the structure in most of the colloidal TMDC QDs produced by top-down methods (e.g., liquid exfoliation) despite their ability to produce the QDs in a large quantity. Here, we successfully prepared the colloidal solution composed of only monolayer WS2 QDs with narrow size distribution by combining a modified liquid exfoliation method and the newly developed procedure separating the monolayer and multilayer QDs by exploiting their difference in the QD-solvent interaction. Using the solution of monolayer WS2 QDs exhibiting a welldefined spectroscopic signature distinct from the multilayer WS2 QDs, we observed the unusually large effect on the photoluminescence (PL) energy and intensity of monolayer WS2 QD by the aromatic solvent molecules beyond the simple dielectric screening effect24, which is absent in surface-passivated colloidal II-VI QDs. This is considered to result from the direct electronic coupling between WS2 QD and aromatic solvent molecules possessing spatially and energetically accessible molecular orbital for the electronic coupling with valence band of the QDs. We also observed the effect of stacking/separation equilibrium on the PL spectrum dictated by the balance between inter QD and QD-solvent interactions. The results from this study on the effect of the solvent molecules on the optical properties of colloidal TMDC QDs will be valuable for their applications in various liquid surrounding environments. Colloidal QDs of WS2 used in this study were prepared via liquid exfoliation with a few important modifications from the previously reported method,8, 15, 25 which allowed us to remove 4 ACS Paragon Plus Environment
Page 5 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nano Letters
the large spectroscopic heterogeneity commonly observed in the colloidal QDs of various TMDC materials. The details of synthesis are described in supporting information. Briefly, bulk WS2 powder in deoxygenated dimethylformamide (DMF) was sonicated for 3 hours under N2 atmosphere to prevent possible oxidation by the dissolved O2. The solution was subsequently diluted in DMF and heated at 140 °C under N2 atmosphere to obtain the final product. These QDs were produced in the absence of any ligands that can potentially bind at the edge or defect sites. There are two important differences from the previous method.8 One is using the solvent after thorough ‘removal of the dissolved O2’ for sonication by bubbling an inert gas for over 30 mins instead of using as-received solvent. The other is ‘dilution’ of the solution before the final heating step. Instead of heating the as-obtained sample solution after sonication, the solution was diluted 10 times with DMF before heating. These two modifications are crucial in obtaining monolayer WS2 QDs of uniform size exhibiting well-defined spectral characteristics by exploiting the direct QD-solvent interaction uninhibited by ligands (Figure S2). 1H and 13C NMR measurements on the concentrated solution of monolayer WS2 QDs in deuterated benzene (C6D6) showed no sign of organic ligand that may bind to the surface of the QDs, confirming the largely bare surface of the QDs. (Figure S3) While we focus on WS2 QDs in this study, the same procedure applied to MoS2 powder gave colloidal solution of uniform monolayer MoS2 QDs, indicating the applicability our strategy to a wider range of TMDC materials. (Figure S4, S5)
5 ACS Paragon Plus Environment
Nano Letters
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Figure 1. (a,b) PL spectra of WS2 QDs synthesized by previously reported method8 (a) and new method reported here (b) at varying excitation wavelengths. (c) PL spectra of WS2 QDs in DMF before (cyan) and after (blue and green) adding pentane under 370 nm excitation. Blue and green curves are the PL in DMF and pentane phase respectively after the completion of solvent extraction. Inset shows a picture of the PL from WS2 QDs in DMF before adding pentane. (d) PL spectra of monolayer WS2 QDs (blue) in DMF phase and multilayer WS2 QDs (green) in pentane phase obtained via repeated solvent extraction. Inset shows the pictures of the PL from DMF and pentane phase.
Figure 1a and b show the PL spectra of the colloidal solution of WS2 QDs prepared respectively by the previously reported method and new method described above at varying excitation wavelengths. The shift of broad PL spectra with excitation wavelength shown in Figure 1a, commonly observed in the colloidal nanocrystals of many TMDC materials, was interpreted as the size heterogeneity. This is an inherent problem of the liquid exfoliation method, which prohibits the reliable spectroscopic characterization of TMDC QDs by ensemble
6 ACS Paragon Plus Environment
Page 6 of 22
Page 7 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nano Letters
measurements. In contrast, the PL spectra of QDs produced using new method exhibit only two spectroscopically distinct species; one centered at 400 nm with multiple peaks and the other at 500 nm with a single broad peak. An important observation here is that the PL at 400 nm is very similar to the single-particle PL of monolayer WSe2 QDs from our recent study,12 which shows the same multiple-peak feature. This feature has been assigned to the vibronic coupling to the high frequency local vibrational mode not present in bulks, which may come from the edge bonds in the QDs. The presence of this vibrational mode was corroborated by Raman measurement as will be discussed later. Such feature is absent in Figure 1a due to the large ensemble heterogeneity. This suggests that the solution of QDs shown in Figure 1b contains the monolayer WS2 QDs with sufficiently narrow size distribution preserving the clear vibronic feature even in the ensemble PL spectrum. The identity of the species with PL centered at 500 nm, on the other hand, cannot be straightforwardly determined from the PL spectrum alone. The confirmed identity of the two species at 400 and 500 nm as the monolayer and multilayer WS2 QD respectively will be discussed in detail below. The presence of only two spectroscopically distinct species in newly prepared WS2 QDs prompted our attempt to exploit the potential difference in the interaction with solvent that may enable the separation via solvent extraction. Since the colloidal WS2 QDs was initially prepared in weakly polar DMF, nonpolar pentane was used as the second phase immiscible with DMF. Figure 1c compares the PL spectrum of as-synthesized WS2 QDs in DMF before adding pentane (cyan) with those in DMF (blue) and pentane (green) phase after the equilibration between the two solvent phases is complete. Surprisingly, only one species with PL centered at 500 nm transferred from DMF to pentane phase while the other remained in DMF phase, indicating that the two species have sufficiently different interaction with solvent enabling the selective 7 ACS Paragon Plus Environment
Nano Letters
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
extraction of one species. A complete separation of the two species, each exhibiting distinct and excitation wavelength-independent PL as shown in Figure 1d, was achieved via multiple solvent extraction (Figure S6). It is noteworthy that the same monolayer WS2 QDs was obtained in other solvents possessing similar properties to DMF, such as N-methly-2-pyrrlidone, demonstrating the robustness of the synthesis procedure in different solvent environment. (Figure S7) The representative TEM images of the two separated species in DMF and pentane phase are shown in Figure 2a,b and Figure 2c,d respectively. Figure 2a shows the isolated particles of ~3.5 nm in lateral size with clearly identifiable lattice. The high-resolution TEM (HRTEM) image and Fourier transform pattern in Figure 2b show the well-defined lattice of a WS2 QD lying flat on the substrate with 2.7 Å lattice spacing in (100) direction.26, 27 Scanning tunneling microscopy (STM) image of the QDs deposited on Au (111) surface shown in Figure 2e and the histogram of the QD diameter (Figure 2g) constructed from the analysis of >150 QDs indicate that the lateral size distribution of the QDs is narrow with average diameter of ~3.5 nm. The identity of these QDs as the monolayer WS2 QDs is evidenced by the small (± 0.5 Å) fluctuation of the apparent height from the average value of 2.4 Å in the STM measurement (Figure 2f,h), which is very close to that of monolayer WS2 nanoclusters directly grown on Au (111) surface.28 The observation of PL polarization anisotropy is another evidence in support of the monolayer thickness of these QDs as discussed below. The TEM image of the nanocrystals transferred to pentane phase (Figure 2c), on the other hand, show the signature of multiple superimposed layers with the lateral size similar to monolayer WS2 QDs. The multilayered structure is more clearly seen in Figure 2d showing the side view of the QDs with the interlayer gap matching that of bulk WS2 (6.3 Å),29, 30 further confirming their identity as the multilayer WS2 QDs.
8 ACS Paragon Plus Environment
Page 8 of 22
Page 9 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nano Letters
Figure 2. (a) TEM and (b) HRTEM image of monolayer WS2 QDs remaining in DMF phase after the repeated two-phase solvent extraction. Inset of (b) shows FFT pattern of the QD image. (c, d) TEM images of multilayer WS2 QDs transferred to pentane phase. (e, f) STM images of monolayer WS2 QDs deposited on Au (111). Inset in (f) shows the profile of the apparent height of the QDs on the horizontal line. (g, h) Histogram of QD diameter and apparent height.
The monolayer and multilayer WS2 QDs each separated into DMF and pentane phase exhibit distinctly different PL spectra and PL polarization anisotropy. The monolayer WS2 QDs exhibit the vibronic feature in the PL and PL excitation (PLE) spectra appearing as the multiple peaks (Figure 3a), and linear PL polarization anisotropy (Figure 3b), which are very close to the recent observation made from single-particle study of monolayer WSe2 QDs produced via hot-injection method.12 The frequency of the dominant vibrational mode in the vibronic structure of the PL spectrum, which was estimated from the difference in the energies of the two adjacent peaks, is 1200-1300 cm-1. This mode has much higher frequency than in-plane optical phonon (E12g) and out-of-plane (A1g) modes of WS2 at 350-420 cm-1 region and is absent in Raman spectra of the
9 ACS Paragon Plus Environment
Nano Letters
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 10 of 22
bulk and monolayer sheets of WS2.31-33 However, Raman spectrum of the colloidal monolayer WS2 QDs obtained here (Figure 3e) shows a broad peak near 1300 cm-1, indicating the presence of an additional mode participating in the vibronic coupling, consistent with PL spectrum. While the assignment of this new mode is not clear, we conjecture it is the local vibrational mode at the edge based on the gradual disappearance of this vibronic feature in the PL with increasing QD diameter in the previous single-particle study on WSe2 QDs.12 The monolayer WS2 QDs obtained here exhibits the unique linear PL polarization anisotropy, which is very similar to what was observed in monolayer WSe2 QDs.12 Figure 3b show the polarization angle dependent PL intensity from the monolayer WS2 QDs deposited on a glass substrate under linearly polarized excitation to 0° direction, where the direction of excitation polarization coincides with that of PL emission at both single-particle and ensemble level. In contrast to the monolayer WS2 QDs, multilayer WS2 QDs exhibit much more red-shifted PL and very weak PL polarization anisotropy. These behaviors resemble those of aggregated monolayer WSe2 QD obtained from hot-injection method12 (Figure S8), where complete loss of PL anisotropy and red to near IR PL were observed presumably from the interlayer electronic coupling analogous to the multilayer TMDC sheets.34, 35 The above results demonstrate that the separation of monolayer and multilayer QDs through their difference in the QD-solvent interaction is highly effective in preparing pure monolayer WS2 QDs via liquid-phase exfoliation.
10 ACS Paragon Plus Environment
Page 11 of 22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nano Letters
Figure 3. (a,c) Solution PLE (black) and PL (red) spectra of monolayer (a) and multilayer (c) WS2 QDs in DMF and pentane respectively. (b,d) Polar plot of the ensemble PL polarization anisotropy for monolayer (b) and multilayer (d) WS2 QDs deposited on the glass substrate under linearly polarized 370 nm excitation to 0° direction. (e) Raman spectra of bulk WS2 powder and colloidal WS2 QDs. (f) Normalized PL spectra of monolayer WS2 QDs before (black) and after (red) increasing the concentration by 10 times. The difference spectrum is shown in green.
The colloidal solution of monolayer WS2 QDs prepared in this study stayed stable for several months without any change of PL spectrum. While the monolayer WS2 QDs prefer weakly polar solvent than nonpolar solvent, they could be suspended stably in a wide variety of solvents of varying polarity including pentane and methanol as long as the concentration is sufficiently low, e.g., at the concentration corresponding to the optical density of 0.01 at 380 nm in 1 cm-thick 11 ACS Paragon Plus Environment
Nano Letters
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 12 of 22
cell. On the other hand, a broad PL centered at 500 nm similar to the PL of multilayer WS2 QDs appeared superimposed on the PL of monolayer WS2 QDs when the concentration of the solution was made much higher, e.g., by 10 times (Figure 3f). Upon dilution and ultrasonication, the newly appeared PL at 500 nm diminished, showing some degree of reversibility. This suggests that the balance between the solvation of the individual monolayer QDs and their stacking via inter-QD interaction altering their ensemble spectroscopic properties is strongly dependent on the concentration of QDs even for relatively good solvents. Preferential solvation of monolayer QDs in DMF over pentane enabling the separation of monolayer and multilayer QDs was also observed in MoS2 QDs prepared in a similar manner as WS2 QDs. (Figure S5) The dependence of the solution PL spectrum on the QD concentration was also similar in both WS2 and MoS2 monolayer QDs. These observations indicate that not only the uniformity of the QD size and thickness but also good solvation of individual QDs is crucial in utilizing the colloidal TMDC QD as the spectroscopic reporter probing the surrounding environment it is interacting with. Having established the method to prepare the colloidal solution of pure monolayer WS2 QDs with narrow size distribution exhibiting well-defined spectroscopic behavior, we investigated the effect of solvent-QD interaction on the PL peak energy and intensity. We focus on the effect of dielectric screening and potential direct electronic coupling between the QD and solvent molecules. Y. Lin et al. reported the shift of PL peak energy (EPL) of monolayer MoS2 nanosheets deposited on SiO2/Si substrate in contact with liquid solvent of varying dielectric constants (εr).24 The blue-shift of EPL with the increase of εr of the solvent (∆EPL
