Electrocatalytic Reduction of Benzyl Chloride by ... - ACS Publications

pH dependent size control, formation mechanism and antimicrobial functionality of bio-inspired AgNPs. Venkatanarasimha Rao Chelli , Animes Kumar Golde...
0 downloads 0 Views 3MB Size
Subscriber access provided by UNIV OF WISCONSIN - MADISON

Article

Electrocatalytic reduction of benzyl chloride by green synthesized silver nanoparticles using pod extract of Acacia nilotica Thomas Nesakumar Jebakumar Immanuel Edison, and Mathur Gopalakrishnan Sethuraman ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/sc4001725 • Publication Date (Web): 28 Jul 2013 Downloaded from http://pubs.acs.org on July 29, 2013

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Sustainable Chemistry & Engineering is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Electrocatalytic reduction of benzyl chloride by green synthesized silver nanoparticles using pod extract of Acacia nilotica Thomas Nesakumar Jebakumar Immanuel Edison and Mathur Gopalakrishnan Sethuraman* Department of Chemistry Gandhigram Rural Institute – Deemed University Gandhigram – 624 302, Dindigul District Tamil Nadu, India

*Author for correspondence. E-mail: [email protected] Phone: +91 (0) 451 – 2452371 Mobile: +91-9443021565 1

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 28

Abstract: The present work describes the eco-friendly synthesis of silver nanoparticles using pod extract of Acacia nilotica. The effect of concentration and effect of pH were studied on the synthesis of silver nanoparticles (AgNPs). The formation of AgNPs was analyzed by visual observation and UV-Vis spectrophotometer. Further, the stable AgNPs were characterized by FT-IR, DLS (Dynamic Light Scattering) with Zeta potential analysis and HR-TEM (High Resolution-Transmission Electron Microscopy) with EDS (Energy Dispersive Spectrum) analysis. The phytoconstituents present in the extract such as gallic acid, ellagic acid, epicatechin and rutin are responsible for reduction and protection of Ag+ and AgNPs which is evident from FT-IR studies. The studies have revealed that it is possible to control the size of AgNPs by finetuning of pH of the reaction medium. The HR-TEM images showed that the synthesized stable AgNPs are approximately 20-30 nm in size with distorted spherical shape Further, the electrocatalytic activity of AgNPs on the reduction of benzyl chloride was studied and compared with bulk silver and inert glassy carbon electrode by cyclic voltammetry. The synthesized AgNPs were found to show greater electrocatalytic activity in the reduction of benzyl chloride compared to that of bulk silver as studied from cyclic voltammetry. Keywords Phyto-synthesis, Acacia nilotica pods, Silver nanoparticles, Electrocatalyst, Benzyl chloride

2

ACS Paragon Plus Environment

Page 3 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

INTRODUCTION Nanoscience and technology has attracted the attention of scientists all over the world especially in the areas of medicine, materials, energy, catalysis and sensors because of the striking difference in physical, chemical and optical characteristics compared to the bulk materials.1-3 The properties of metal nanoparticles strongly depend upon size, shape, stabilizers and medium.4-6 Nanoparticles are synthesized by various methods such as, physical vapor deposition, chemical vapor deposition, sol-gel method, microwave synthesis, ultrasonication method, electrochemical method and reduction of metal ions.7-13 Among these methods, colloidal metal nanoparticles with various morphologies are synthesized by the reduction of metal ions using reducing agents. In this method, the addition of stabilizing agent or capping agent is important because of the fact that synthesized nanoparticles are vulnerable to oxidation in the reaction environment and also in air. The chemicals used for the synthesis and protection of nanoparticles are often toxic, costly and non-ecofriendly. Nowadays nanomaterials viz., metal nanoparticles, metal oxides and metal sulphides are synthesized by bioreduction methods using plant extracts, fungi, microorganisms and green algae as reducing sources.14-21 The green methods of synthesis of nanoparticles have the advantages such as low cost and eco-friendliness and usually they give rise to stable nanoparticles. Acacia nilotica belongs to Leguminosae family and the pods contain the phytoconstituents such as gallic acid, ellagic acid, epicatechin and rutin.22 The chemical structure of phytoconstituents present in the A. nilotica extract are shown in Fig. 1 In the present work, the silver nanoparticles (AgNPs) were synthesized using the aqueous extract of A. nilotica pods. The effects of concentration of the extract as well as the effect of pH at various time intervals were studied by visual observation and UV-Vis spectrophotometer. The 3

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 28

stable AgNps were further characterized by FT-IR, DLS with Zeta potential analysis and HRTEM with EDS analysis. Moreover the electrocatalytic activity of AgNPs on the reduction of benzyl chloride was tested using cyclic voltammetry.

Fig. 1

MATERIALS AND METHODS Preparation of the extract From the A. nilotica pods, collected from the campus of Gandhigram Rural Institute, Dindigul Dt, Tamil Nadu, India, seeds were completely removed, cleaned, dried and ground well. About 5 g of the crushed pods was extracted with 100 ml of pure mili Q water at 80° C for 30 min and the extract was filtered using Whatmann filter paper No. 2. The clear filtrate was used for the synthesis of AgNPs. Synthesis of AgNPs Synthesis of AgNPs were carried out by taking five different concentrations of the extract viz., 0.25 ml, 0.5 ml, 1.0 ml, 2.0 ml and 2.5 ml and adding them separately to 24.75 ml, 24.5 ml, 24.0 ml, 23 ml and 22.5 ml of 0.01 M AgNO3 respectively (CDH Chemicals, Mumbai, India) at room temperature. After addition of the extract, the reaction was continuously examined by visual and UV-Visible spectrophotometer (PerkinElmer 35 UV-Visible spectrophotometer). The size and shape of AgNPs was mainly controlled by pH of the reaction medium. The effect of change of pH ranging from 5-9 on the AgNPs synthesis was studied by taking 1 ml of the extract and adding to 24 ml of 0.01 M AgNO3 at various time intervals. The pH was varied by the addition of 0.1 M sulfuric acid in the acidic region and 0.1 M sodium hydroxide solution in the basic region. For UV-Vis spectral analysis, 0.1 ml of AgNPs was taken in a cuvette and 4

ACS Paragon Plus Environment

Page 5 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

diluted by 2.9 ml of distilled water. The stable, small AgNPs were chosen for further investigation and characterization. Dynamic light scattering (DLS) with Zetapotential analysis The stability and size distribution of AgNPs synthesized at pH viz., 5, 7 and 9 were measured using Zetasizer Nano S90 (Malvern). Characterization of synthesized AgNPs FT-IR spectroscopy The functional groups of phytoconstituents which probably protect the AgNPs through capping were analyzed by JASCO FT-IR 400 by mixing the dried aqueous extract and AgNPs with KBr to make the pellet for FT-IR studies. HR-TEM with EDS analysis The synthesised AgNPs were

washed and diluted using distilled water to fix the

absorbance at 0.5 using UV-Vis spectrophotometer. One drop of diluted AgNPs were drop casted on to Cu grid carbon disc and was allowed to dry in air. After drying, the AgNPs were characterized by JEOL JEM 2100 High Resolution Transmission Electron Microscope operating in the range of 200 kV of acceleration. Simultaneously, the energy dispersive spectrum (EDS) was also recorded. Electrocatalytic activity analysis by cyclic voltammetry For investigating the electrocatalytic activity of AgNPs, the synthesised AgNPs was drop casted on to glassy carbon electrode (3 mm diameter), allowed it to dry for 6 hrs. The AgNPs modified electrode thus obtained was used to study the electrocatalytic activity by cyclic voltammetry. Simultaneously, electrochemical response of the unmodified glassy carbon electrode and bulk metallic silver electrode (3 mm diameter) was also measured. 5

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 28

All the electrochemical experiments were performed using CHI 760 D electrochemical workstation built with CHI 760 D software. The standard three electrode system was used, in which glassycarbon electrode or silver or AgNPs modified electrode served as a working electrode, platinum wire as a counter electrode and saturated calomel electrode as a reference electrode. Benzyl chloride (0.001 M) was used as the electrolyte while 0.1 M TEAP was used as supporting electrolyte and acetonitrile as a solvent. The total volume of the electrolytes was fixed as 25 ml. The potential window was fixed as -1.4 V to -0.4 V, the scan was started from negative (cathodic) potential at the scan rate of 10 mV/Sec. RESULTS AND DISCUSSION UV-Vis spectroscopy and DLS studies UV-Vis spectroscopy is an indirect method to examine the formation of biogenic AgNPs from AgNO3 solution. During the formation of AgNPs a visible color change (from colorless to yellow) occurred. The intensity of the yellow color increased with the increase of concentration of the extract. Previous workers have reported that the formation of yellow color and the increase of intensity of color could be due to the excitation of surface plasmon vibrations.23 The Surface Plasmon Resonance (SPR) is collective oscillations of the conductive electrons of AgNPs. Excitation of the surface Plasmon causes strong light scattering by an electric field of the wavelength where resonance occur. This phenomenon results in the appearance of strong SPR bands. The optical absorbance spectrum is dominated by the SPR which shows a red shift or blue shift depending upon the particle size, shape, state of aggregation and the surrounding dielectric medium.24 The increase in absorbance values (Fig. 2) with increase in the concentration of AgNPs demonstrates higher production of AgNPs.25 Stamplecoskie et al26 have reported that AgNPs which have spherical shape show SPR in the region 400-440 nm. Hence the UV studies 6

ACS Paragon Plus Environment

Page 7 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

give clue regarding the shape of AgNPs generated. Upon increase of concentration, the SPR peak which was observed at 425 nm underwent a red shift indicating an increase of the particle size with the increase of the concentration of the extract. Several workers have discussed the influence of the pH of the medium over the size of the nanoparticles. In fact size controlled gold nanoparticles formation and size controlled green synthesis of AgNPs have been carried out.27, 28 Fig. 2

The effect of change of pH on the biosynthesis of AgNPs using A. nilotica extract has been studied by recording its UV-Vis spectrum at different pH values viz., 5,6,7,8 and 9. In all the pH ranges, the SPR appeared between 409-430 nm indicating that there is no change in the shape of the nanoparticles with change in pH. However as could been seen from Fig. 3-8, as the pH changes from acidic to basic region a hypsochromic shift was observed which indicated the reduction in the size of the particles.29 Hence this study demonstrates that by changing the pH suitably, the particle size could be lowered. The effect of pH at various intervals of time also demonstrates that duration of time has little effect over the size of AgNPs. Even after 48 hrs, there is no aggregation of the nanoparticles as could be seen from Fig. 3-8. The visual observation of synthesized AgNPs at 24 hrs of reaction time is shown in Fig. 9. In other words the study confirms the non-formation of aggregates over a longer duration of time, which vouches for the stability of AgNPs. This validates that A. nilotica pods are viable sources for the synthesis of nano-sized silver particles.

Fig. 3-9

7

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 28

In order to find out the particle size distribution of AgNPs in solution, DLS measurements were carried out after 24 hrs of reaction time at three different pH values viz., 5, 7 and 9. The qualitative DLS size distribution image of AgNPs is shown in Fig. 10-12. The average particle size of AgNPs in the pH 5, 7 and 9 are 45 nm, 29 nm and 20 nm respectively. The corresponding zeta potential values are -36.2 mV, -52.1 mV and -51.9 mV suggesting the high stability of AgNPs at pH 7.30 The large negative potential value could be due to the capping of phytoconstituents viz., gallic acid, ellagic acid, epicatechin and rutin which are present in the extract. From the results of the above study it could be inferred that neutral pH (pH 7) is the optimum pH for the formation of highly stable AgNPs. These results agree with our earlier observation.14 The AgNPs synthesized in the pH 7 at 24 Hrs of reaction time were further analyzed and characterized. Fig. 10-12 FT-IR studies FT-IR spectrum of dried aqueous extract and synthesized AgNPs obtained at optimum pH at 24 Hrs of reaction time are shown in Fig. 13. The IR-spectrum of A. nilotica extract showed an absorption band (broad) at 3394 cm-1 which is the characteristic of –OH stretching of H-bonded phenolic group. The small sharp band appeared at 2931 cm-1 may be due to –CH stretching of methylene group. The absorption band at 1629 cm-1 corresponds to carbonyl group of carboxylic acid in the extract. The sharp band at 1411 cm-1 and 597 cm-1 indicated –OH bending of phenolic group. The band appeared at 1058 cm-1 could be due to -C-O stretching of phenolic acid. The absorption bands which appeared in the IR spectrum of the aqueous extract could also be seen in the synthesized AgNPs. Moreover, the sharp band appeared at 1384 cm-1 in 8

ACS Paragon Plus Environment

Page 9 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

the IR spectra of AgNPs is due to the presence of nitrate ion. This suggested that the synthesized AgNPs are protected by the phytoconstituents viz., gallic acid, ellagic acid, epicatechin and rutin are present in the aqueous extract. Fig. 13

HR-TEM with EDS analysis The HR-TEM images of stable AgNPs and SAED pattern recorded at neutral pH after 24 hrs of reaction time are depicted in Fig. 14. From the images, it can be seen that the AgNPs are capped with phytoconstituents of the extract. Moreover the size of the AgNPs were around 20-30 nm with distorted spherical shape. The SAED pattern reveals that the synthesized AgNPs are crystalline (white dots in the Fig. 14) and mainly distorted in (111) plane with fcc geometry. The EDS of phytocapped AgNPs is presented in Fig. 15. The EDS contains the major signal of the Ag atoms which indicated the fact AgNPs were uniformly distributed in the carbon disc. The weak signals of O and C also had appeared which ought to have come from the phytoconstituents of A. nilotica extract. The Cu peak had come from the TEM grid. Fig. 14-15

Electrocatalytic activity analysis The biosynthesized stable AgNPs were tested for their efficacy in catalyzing the reduction of benzyl chloride. Apart from glassy carbon, two types of silver electrodes were used for assessing the catalytic activity of phyto synthesized AgNPs. The cyclic voltammogram of the three electrodes are depicted in Fig. 16. It could be seen that a single irreversible peak was observed for all the three electrodes which is the indication of electro-reduction of benzyl 9

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 28

chloride. The voltammetric behavior of benzyl chloride at bulk Ag is quite similar to that of glassy carbon. The results obtained from the voltammogram are shown in table 1. A positive shift of the peak from -0.81 V to -0.78 V was observed in metallic Ag which indicated the catalytic role of silver in reduction of benzyl chloride.31 The position of the peak depended heavily on the electrode material. The AgNPs modified glassy carbon electrode showed greater catalytic activity (significant positive shift) on the reduction of benzyl chloride when compared to those of glassy carbon and metallic Ag electrode. The mechanism of the electrocatalytic reduction of benzyl chloride is depicted herein under. PhCH2 Cl + PhCH2

.

+

e-

PhCH2

e-

PhCH2

.

-

+ PhCH 2

-

Isse et al32 have shown that adsorption of both PhCH2Cl molecule and its reduction products play an important role in the electrocatalytic process. The biogenic AgNPs with large surface area provide wide avenues for adsorption of both PhCH2Cl and its reduction products which explains its better electrocatalytic behavior than bulk Ag. Thus extraordinary electrocatalytic effect of AgNPs is probably related to the diffusion controlled process occurring at the surface of the nanoparticles and to the high affinity of the AgNPs with chloride ions.33 Fig. 16 Table 1

10

ACS Paragon Plus Environment

Page 11 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

CONCLUSIONS The present study has demonstrated that AgNPs could be easily prepared by green method using aqueous extract of A. nilotica pods. The concentration of extract and the pH of the medium play a role in controlling the size of AgNPs. The phytoconstituents such as gallic acid, ellagic acid, epicatechin and rutin act as reducing agents for the synthesis of AgNPs and the capping of AgNPs are evident from FT-IR studies. The HR-TEM images showed that the synthesized stable AgNPs are approximately 20-30 nm in size with distorted spherical shape. The SAED pattern revealed the crystalline nature of AgNPs. The significant positive shift in cyclic voltammogram of AgNPs compared to that of bulk Ag and glassy carbon suggested the high electrocatalytic activity of synthesized AgNPs.

11

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 28

References 1. Song, J. Y.; Jang, H. K.; Kim, B. S. Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts. Process Biochem. 2009, 44 (10), DOI 10.1016/j.procbio.2009.06.005. 2. Lloyd, J. R.; Byrne, J. M.; Coker, V. S. Biotechnological synthesis of functional nanomaterials. Curr. Opin. Biotechnol. 2011, 22 (4), DOI 10.1016/j.copbio.2011.06.008. 3. Sneha, K.; Sathishkumar, M.; Mao, J.; Kwak, I. S.; Yun, Y. S. Corynebacterium glutamicum-mediated crystallization of silver ions through sorption and reduction processes, Chem. Eng. J. 2010, 162 (3), DOI 10.1016/j.cej.2010.07.006. 4. Jacob, J. A.; Biswas, N.; Mukherjee, T.; Kapoor, S. Effect of plant-based phenol derivatives on the formation of Cu and Ag nanoparticles, Colloids Surf. B Biointerfaces. 2011, 87 (1), DOI 10.1016/j.colsurfb.2011.04.036. 5. Narayanan, K. B.; Sakthivel, N. Extracellular synthesis of silver nanoparticles using the leaf extract of Coleus amboinicus Lour, Mater. Res. Bull., 2011, 46 (10), DOI 10.1016/j.materresbull.2011.05.041. 6. Kumar, V. G.; Gokavarapu, S. D.; Rajeswari, A.; Dhas, T. S.; Karthick, V.; Kapadia, Z.; Shrestha, T.; Barathy, I. A.; Sinha, A. R. S. Facile green synthesis of gold nanoparticles using leaf extract of antidiabetic potent Cassia auriculata, Colloids Surf. B Biointerfaces. 2011, 87 (1), DOI 10.1016/j.colsurfb.2011.05.016. 7. Horwat, D.; Zakharov, D. I.; Endrino, J. L.; Soldera, F.; Anders, A.; Migot, S.; Karoum, R.; Vernoux, Ph.; Pierson, J. F. Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition. Surf. Coat. Technol. 2011, 205 (2), DOI 10.1016/j.surfcoat.2010.12.021. 12

ACS Paragon Plus Environment

Page 13 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

8. Dillon, A. C.; Mahan, A. H.; Deshpande, R.; Alleman, J. L.; Blackburn, J. L.; Parillia, P. A.; Heben, M. J.; Engtrakul, C.; Gilbert, K. E. H.; Jones, K. M.; To, R.; Lee, S-H.; Lehman, J. H. Hot-wire chemical vapor synthesis for a variety of nano-materials with novel applications. Thin Solid Films. 2006, 501 (1-2) DOI 10.1016/j.tsf.2005.07.182. 9. Sobhani, M.; Rezaie, H. R.; Naghizadeh, R.; Sol–gel synthesis of aluminum titanate (Al2TiO5)

nano-particles.

J.

Mater.

Process.

Technol.,

2008,

206

(1-3),

10.1016/j.jmatprotec.2007.12.023. 10. Nadagouda, M. N.; Speth, T. F.; Varma, R. S. Microwave-assisted green synthesis of silver nanostructures. Acc. Chem. Res. 2011, 44 (7), 10.1021/ar1001457. 11. Wani, I. A.; Ganguly, A.; Ahmed, J.; Ahmad, T. Silver nanoparticles: ultrasonic wave assisted synthesis, optical characterization and surface area studies. Mater. Lett., 2011, 65 (3), DOI 10.1016/j.matlet.2010.11.003. 12. Starowicz, M.; Stypula, B.; Banas, J. Electrochemical synthesis of silver nanoparticles. Electrochem. Commun. 2006, 8 (2), DOI 10.1016/j.elecom.2005.11.018. 13. Kima, K. D.; Hanb, D. N.; Kim, H. T. Optimization of experimental conditions based on the Taguchi robust design for the formation of nano-sized silver particles by chemical reduction method. Chem. Eng. J. 2004, 104 (1-3), DOI 10.1016/j.cej.2004.08.003. 14. Edison, T. J. I.; Sethuraman, M. G. Instant green synthesis of silver nanoparticles using Terminalia chebula fruit extract and evaluation of their catalytic activity on reduction of methylene blue. Process Biochem. 2012, 47 (9), DOI 10.1016/j.procbio.2012.04.025. 15. Edison, T. J. I.; Sethuraman, M. G. Biogenic robust synthesis of silver nanoparticles using Punica granatum peel and its application as a green catalyst for the reduction of an

13

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 28

anthropogenic pollutant 4-nitrophenol, Spectrochim. Acta, Part A, 2013, 104 (1) DOI 10.1016/j.saa.2012.11.084. 16. Merin, D. D.; Prakash, S.; Bhimba, B. V. Antibacterial screening of silver nanoparticles synthesized by marine micro algae. Asian Pac. J. Trop. Med., 2010, 3 (10), DOI 10.1016/S1995-7645(10)60191-5. 17. Gajbhiye, M.; Kesharwani, J.; Ingle, A.; Gade, A.; Rai, M. Fungus-mediated synthesis of silver nanoparticles and their activity against pathogenic fungi in combination with fluconazole.

Nanomed.

:

Nanotechnol.

Bio.

Med.

2009,

5

(4),

DOI

10.1016/j.nano.2009.06.005. 18. Jaidev, L. R.; Narasimha, G. Fungal mediated biosynthesis of silver nanoparticles, characterization and antimicrobial activity. Colloids Surf. B: Biointerfaces. 2010, 81 (2), DOI 10.1016/j.colsurfb.2010.07.033. 19. Sadowski, Z.; Maliszewska, I. H.; Grochowalska, B.; Polowczyk, I.; Kozlecki, T. Synthesis of silver nanoparticles using microorganisms. Mater. Sci-Poland, 2008, 26 (2), 419. 20. Nadagouda, M. N.; Castle, A. B.; Murdock, R. C.; Hussain, S. M.; Varma, R. S. In vitro biocompatibility of nanoscale zerovalent iron particles (NZVI) synthesized using tea polyphenols. Green Chem. 2010, 12, 10.1039/B921203P. 21. Nadagouda, M. N.; Varma, R. S. Green synthesis of silver and palladium nanoparticles at room

temperature

using

coffee

and

tea

extract.

Green

Chem.

2008,

10,10.1039/B804703K.

14

ACS Paragon Plus Environment

Page 15 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

22. Singh, B. N.; Singh, B. R.; Singh, R. L.; Prakash, D. Sarma, B. K.; Singh, H. B. Antioxidant and anti-quorum sensing activities of green pod of Acacia nilotica L. Food Chem. Toxicol., 2009, 47 (4), 10.1016/j.fct.2009.01.009. 23. Rai, A.; Singh, A.; Ahmad, A.; Sastry, M. Role of Halide Ions and Temperature on the Morphology of Biologically Synthesized Gold Nanotriangles. Langmuir, 2006, 22 (2), 10.1021/la052055q. 24. Tripathy, A.; Raichur, A.M.; Chandrasekaran, N.; Prathna, T.C.; Mukherjee, A. Process variables in biomimetic synthesis of silver nanoparticles by aqueous extract of Azadirachta indica (Neem leaves). J. Nanopart. Res. 2010, 12, 10.1007/s11051-0099602-5. 25. Sathishkumar, M.; Sneha, K.; Won, S.W.; Cho, C.-W.; Kim, S.; Yun, Y.-S. Cinnamon zeylanicum bark extract and powder mediated green synthesis of nano-crystalline silver particles and its bactericidal activity. Colloids Surf. B Biointerfaces, 2009, 73 (2), 10.1016/j.colsurfb.2009.06.005. 26. Stamplecoskie, K.G.; Scaiano, J.C. Light Emitting Diode Irradiation Can Control the Morphology and Optical Properties of Silver Nanoparticles. J. Am. Chem. Soc., 2010, 132 (6), 10.1021/ja910010b. 27. Huang, X.; Wu, H.; Liao, X.; Shi, B. One-step, size-controlled synthesis of gold nanoparticles at room temperature using plant tannin. Green Chem., 2010,12, 10.1039/B918176H. 28. Kora, A.J.; Beedu, S.R.; Jayaraman, A. Size-controlled green synthesis of silver nanoparticles mediated by gum ghatti (Anogeissus latifolia) and its biological activity. Org. Med. Chem. Lett., 2012, 2, 10.1186/2191-2858-2-17. 15

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 28

29. Amendola, V.; Meneghetti, M. Size Evaluation of Gold Nanoparticles by UV−vis Spectroscopy. J. Phys. Chem. C, 2009, 113 (11), 10.1021/jp8082425. 30. Rao, Y. S.; Kotakadi, V. S.; Prasad, T. N. V. K. V.; Reddy, A. V.; Gopal, D. V. R. S. Green synthesis and spectral characterization of silver nanoparticles from Lakshmi tulasi (Ocimum sanctum) leaf extract. Spectrochim. Acta A Mol. Biomol. Spectrosc. 2013, 103 (15), 10.1016/j.saa.2012.11.028. 31. Maiyalagan, T. Synthesis, characterization and electrocatalytic activity of silver nanorods towards the reduction of benzyl chloride. Appl. Catal., A, 2008, 340 (2), DOI 10.1016/j.apcata.2008.02.016. 32. Isse, A. A.; Giusti, A. D.; Gennaro, A.; Falciola, L.; Mussini, P. R. Electrochemical reduction of benzyl halides at a silver electrode. Electrochim. Acta. 2006, 51 (23), DOI 10.1016/j.electacta.2006.01.039 33. Bellomunno, C.; Bonanomi, D.; Falciola, L.; Longhi, M.; Mussini, P. R.; Doubova, L. M.; Silvestro, G. D. Building up an electrocatalytic activity scale of cathode materials for organic

halide

reductions.

Electrochim.

Acta.

2005,

50

(11),

DOI

10.1016/j.electacta.2004.10.047.

16

ACS Paragon Plus Environment

Page 17 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Table. 1 Voltammeteric data for the reduction of benzyl chloride in acetonitrile + 0.1 M TEAP at GC, Bulk Silver and GC modified AgNPs

Electrode

Potential (V)

Current × 10-5 A

GC

-0.81

-6.14

Bulk Silver

-0.78

-7.19

GC/AgNps

-0.74

-8.22

17

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 28

Figure Captions: Fig. 1 Chemical structures of phyoconstituents present in the A. nilotica extract Fig. 2 Effect of concentration of the A. nilotica pod extract on AgNPs synthesis at 6 Hrs of reaction time Fig. 3 Effect of pH on AgNPs synthesis At 10 mins of reaction tme Fig. 4 Effect of pH on AgNPs synthesis At 2 Hrs of reaction time Fig. 5 Effect of pH on AgNPs synthesis At 6 Hrs of reaction time Fig. 6 Effect of pH on AgNPs synthesis At 12 Hrs of reaction time Fig. 7 Effect of pH on AgNPs synthesis At 24 Hrs of reaction time Fig. 8 Effect of pH on AgNPs synthesis At 48 Hrs of reaction time Fig. 9 Visual observation on the synthesis of AgNPs at different pH ranges (At 24 Hrs reaction time) Fig. 10 DLS Size distribution of AgNPs at pH-9 (24 Hrs reaction time) Fig. 11 DLS Size distribution of AgNPs at pH-7 (24 Hrs reaction time) Fig. 12 DLS Size distribution of AgNPs at pH-5 (24 Hrs reaction time) Fig. 13 FT-IR spectra of A. nilotica pod extract (B) and Synthesized AgNPs (A) Fig. 14 HR-TEM images of synthesized AgNPs (PH-7 at 24 Hrs reaction time) at different magnifications (A, B and C), SAED pattern of AgNPs (D) Fig. 15 EDS profile of synthesized AgNPs Fig. 16 Cyclic voltammogram of reduction of benzyl chloride in acetonitrile + 0.1 M TEAP at GC, Bulk Silver and GC modified AgNPs

18

ACS Paragon Plus Environment

Page 19 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

O OH

HO O

HO

OH

OH HO O O OH

OH O

Gallic acid

Ellagic acid OH

OH OH HO HO

O OH OH

O

HO

OH

O O

O OH

OH H3C HO

OH

O

HO OH

Rutin

Epicatechin

Fig. 1

19

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

Absorbance

429 nm

0.25 ml 0.50 ml 1.0 ml 2.0 ml 2.5 ml

427 nm

1

425 nm 425 nm 425 nm 0 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 2

0.35

pH-5 (λmax- 429 nm) pH-6 (λmax- 426 nm)

0.30

pH-7 (λmax- 423 nm) pH-8 (λmax- 420 nm)

0.25

Absorbance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 28

pH-9 (λmax- 418 nm)

0.20 0.15 0.10 0.05 0.00 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 3

20

ACS Paragon Plus Environment

Page 21 of 28

pH-5 (λmax- 429 nm) pH-6 (λmax- 426 nm)

1.0

pH-7 (λmax- 423 nm)

Absorbance

pH-8 (λmax- 418 nm) pH-9 (λmax- 417 nm)

0.5

0.0 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 4

1.5

pH-5 (λmax- 430 nm) pH-6 (λmax- 428 nm) pH-7 (λmax- 422 nm) pH-8 (λmax- 416 nm)

1.0

Absorbance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

pH-9 (λmax- 413 nm)

0.5

0.0 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 5

21

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

pH-5 (λmax- 430 nm)

1.5

pH-6 (λmax- 428 nm) pH-7 (λmax- 421 nm)

Absorbance

pH-8 (λmax- 416 nm) pH-9 (λmax- 413 nm)

1.0

0.5

0.0 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 6

pH-5 (λmax- 430 nm) pH-6 (λmax- 428 nm) pH-7 (λmax- 419 nm) pH-8 (λmax- 412 nm)

Absorbance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 28

pH-9 (λmax- 409 nm) 1

0 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 7

22

ACS Paragon Plus Environment

Page 23 of 28

2

pH-5 (λmax- 430 nm) pH-6 (λmax- 427 nm) pH-7 (λmax- 419 nm) pH-8 (λmax- 412 nm)

Absorbance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

pH-9 (λmax- 409 nm) 1

0 200

300

400

500

600

700

800

Wavelength (λ) (nm)

Fig. 8

pH-5

pH-6

pH-7

pH-8

pH-9

Fig. 9

23

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 28

Fig. 10

Fig. 11

24

ACS Paragon Plus Environment

Page 25 of 28

Fig. 12

1384

100

597

80

40

1058

2931

1629

60

A 20

B 1411

3394

% Transmittance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

0 4000

3500

3000

2500

2000

1500

1000

500

Wave Number (cm-1)

Fig. 13

25

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 28

Fig. 14

Fig. 15

ACS Paragon Plus Environment

26

Page 27 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Fig. 16

27

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 28 of 28

For Table of Contents Use Only

Electrocatalytic reduction of benzyl chloride by green synthesized silver nanoparticles using pod extract of Acacia nilotica Thomas Nesakumar Jebakumar Immanuel Edison and Mathur Gopalakrishnan Sethuraman* Department of Chemistry Gandhigram Rural Institute – Deemed University Gandhigram – 624 302, Dindigul District Tamil Nadu, India

AgNPs

Ag+

Acacia nilotica pods AgNPs

AgNPs

AgNPs

H 2O AgNPs

CH3

Cl

GC/AgNPs

Benzyl chloride

Electrocatalytic activity of AgNPs Toluene

Acacia nilotica as a reducing agent to get AgNPs, its utility in electrocatalytic reduction of benzyl chloride to toluene is demonstrated

28

ACS Paragon Plus Environment