Fitness and Recovery of Bacterial Communities and Antibiotic

Aug 22, 2016 - Antibiotic resistance genes (ARGs) are increasingly appreciated to be important as micropollutants. Indirectly produced by human activi...
1 downloads 9 Views 498KB Size
Subscriber access provided by Northern Illinois University

Article

Fitness and recovery of bacterial communities and antibiotic resistance genes in urban wastewaters exposed to classical disinfection treatments Andrea Di Cesare, Diego Fontaneto, Julia Doppelbauer, and Gianluca Corno Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b02268 • Publication Date (Web): 22 Aug 2016 Downloaded from http://pubs.acs.org on August 23, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 35

Environmental Science & Technology

1

Fitness and recovery of bacterial communities and antibiotic resistance genes

2

in urban wastewaters exposed to classical disinfection treatments

3 4

Andrea Di Cesare, Diego Fontaneto, Julia Doppelbauer, Gianluca Corno*

5 6

Microbial Ecology Group, National Research Council of Italy, Institute of Ecosystem

7

Study - Largo Tonolli 50, 28922 Verbania (Italy)

8 9 10

* Corresponding author:

Gianluca Corno

11

email: [email protected]

12

tel: +390323518321 fax: +390323556513

13 14 15 16 17 18 19 20 21 22 23 24 25

ACS Paragon Plus Environment

Environmental Science & Technology

26

Abstract

27

Antibiotic resistance genes (ARGs) are increasingly appreciated to be important as

28

micro-pollutants. Indirectly produced by human activities, they are released into the

29

environment, as they are untargeted by conventional wastewater treatments. In

30

order to understand the fate of ARGs and of other resistant forms (e.g. phenotypical

31

adaptations) in urban wastewater treatment plants (WWTPs), we monitored three

32

WWTPs with different disinfection processes (chlorine, peracetic acid (PAA), and

33

ultraviolet light (UV)). We monitored WWTPs influx and pre- and post-disinfection

34

effluent over 24 hours, followed by incubation experiments lasting for 96 hours. We

35

measured bacterial abundance, size distribution and aggregational behavior, the

36

proportion of intact (active) cells, and the abundances of four ARGs and of the

37

mobile element integron1. While all the pre-disinfection treatments of all WWTPs

38

removed the majority of bacteria and of associated ARGs, of the disinfection

39

processes only PAA efficiently removed bacterial cells. However, the stress imposed

40

by PAA selected for bacterial aggregates and, similarly to chlorine, stimulated the

41

selection of ARGs during the incubation experiment. This suggests disinfections

42

based on chemically aggressive destruction of bacterial cell structures can promote

43

a residual microbial community that is more resistant to antibiotics and, given the

44

altered aggregational behavior, to competitive stress in nature.

45 46 47 48 49 50

ACS Paragon Plus Environment

Page 2 of 35

Page 3 of 35

Environmental Science & Technology

51

Introduction

52

Wastewater treatment plants (WWTPs) are designed to remove nutrients (e.g. C, P,

53

and N) and to reduce pathogen loads, but while they can eliminate some

54

pharmaceuticals (e.g. paracetamol) and some antimicrobials (e.g. zwitterionic

55

fluoroquinolones), they do not target the majority of antibiotics, which are thus not

56

removed1. Furthermore, the generally applied technology in wastewater treatments

57

does not target emergent contaminants, such as antibiotic resistant bacteria (ARB)

58

or antibiotic resistance genes (ARGs)2.

59

Bacterial communities are active and highly dense in activated sludge and in water

60

during the biological treatment, where spatial proximity between bacterial cells is

61

enhanced and nutrients and antibiotics concentrated, leading to ideal conditions for

62

the spread of ARB and ARGs3,4. Concomitancy between reduced removal and

63

favorable ecological conditions makes WWTPs potential reservoirs of ARB3,5,6 and

64

hot-spots for the spread of ARGs to rivers and lakes7-9. Urban WWTPs generally

65

comprise successive treatments (mechanical, biological, chemical), and each of

66

them can indirectly influence the fate of ARB and ARGs3.

67

Because the emergence of antibiotic resistance is a compelling health problem and

68

because of the increasing reuse of treated wastewaters (e.g. in agriculture) due to

69

water scarcity, the presence of ARB and ARGs in WWTP effluents has become a

70

major public concern10, 11.

71

Currently, a final disinfection is generally applied to reduce the overall indicator

72

bacterial numbers (i.e. Escherichia coli) in WWTP effluents. Between the different

73

technologies implemented for this treatment phase, chlorination is the most

74

commonly used, but also has the highest secondary impact on the environment12.

75

Chlorine is introduced in wastewater and it persists mainly as HOCl and OCl- (ratio

ACS Paragon Plus Environment

Environmental Science & Technology

76

depending on the pH, summarized by Sharma and coworkers13). HOCl reacts with

77

superoxide anions, producing ‧OH that destroys bacterial cell structures by

78

oxidation14. The process of chlorination generates harmful disinfection byproducts

79

released into the environment with the effluents15, and HOCl that can react with NH3

80

producing monochloramine, affecting the overall removal of bacteria and, indirectly,

81

of ARGs2. Less severe peracetic acid (PAA) disinfection treatment was developed in

82

the early ‘80s, and it is now considered an efficient substitute for chlorination16. The

83

mechanism of action of PAA is based on the production of “active” oxygen or

84

reactive oxygen species (summarized by Gehr and colleagues16) damaging the

85

bacterial cell structures. Another alternative disinfection treatment is irradiation of

86

wastewaters with UV, which damages dsDNA and, in turn, bacterial cells11. Unlike

87

chemical disinfections, UV treatment leaves no residues in the effluent.

88

A very limited number of studies have evaluated the efficiency of disinfection

89

treatments on removal or deactivation of ARGs, and none of them considers the

90

multi-species bacterial community13. The scarce data available suggest a potential

91

relationship between the abundance of introduced disinfectant (i.e. chlorine), the

92

contact time, and ARG removal efficiency2. Furthermore, Guo and colleagues5

93

demonstrated that low doses of chlorine promote bacterial horizontal gene transfer

94

(HGT) and thus the potential spread of antibiotic resistance. Conversely, high

95

chlorine concentrations or high UV radiations extensively suppress HGT.

96

In this study we present the first, to our knowledge, comprehensive research on the

97

response of the resident microbial community in terms of number, fitness, and

98

antibiotic resistance spread in relation to different disinfection technologies that are

99

commonly applied worldwide (chlorine, PAA, and UV disinfection). The experimental

100

setup has been designed to reproduce conditions as close as possible to those of

ACS Paragon Plus Environment

Page 4 of 35

Page 5 of 35

Environmental Science & Technology

101

the environments in which the WWTP effluents are released. The residual effect of

102

the disinfections on the released bacterial communities was evaluated by performing

103

96h-long batch experiments in which the fate of four ARGs of particular importance

104

for the evaluation of the communities resistome, and of the class 1 integrase gene

105

(int1), was determined. The four selected ARGs each represent either abundant

106

genes detected in the long-term ARGs monitoring of Lake Maggiore, where the

107

effluents of two of the three WWTPs used for this study are released17, or genes

108

found to be particularly important in terms of absolute abundance in a previous study

109

on the same WWTPs18. In detail, we assessed the relative proportion of the gene

110

tetA (against tetracycline), that can be transferred by HGT and it is commonly found

111

in environmental and clinical bacterial communities19. The gene ermB (against

112

macrolides), one of the most common erythromycin resistance genes in the

113

environment, that has been recently found on a conjugative plasmid and co-

114

transferred together with a toxin-antitoxin system from an environmental strain to

115

Enterococcus faecalis JH22 by in vitro conjugation20. The gene blaTEM, against β-

116

lactams is abundant in many metagenomes from human and environmental

117

microbiomes21, and it can be co-transferred with integrons in multi-drug resistant

118

enterobacteriaceae22. The gene qnrS, one the most common quinolone plasmid

119

mediated resistance genes23, found on conjugative plasmids in strains isolated from

120

animals24 and from waters25. The gene int1 has been also quantified and tested as

121

potential proxy of antibiotic resistance in the three WWTPs.

122 123

Materials and methods

124

WWTPs sampling

ACS Paragon Plus Environment

Environmental Science & Technology

125

Samples (1L in DNA free bottles) were collected from the urban WWTPs of Verbania

126

(VB; 45°55’54” N, 8°33’57” E; 51000 Population Equivalent, PE), Novara (NO;

127

45°25’30” N, 8°35’28” E; 110000 PE), and Cannobio (CN; 46°04’00” N, 8°42’11” E;

128

15000 PE) in Piedmont (Italy). The three WWTPs are characterized by different

129

treatment designs (detailed description of the WWTPs is available in Di Cesare et

130

al., 2016). Moreover, each WWTP applies a particular disinfection technology:

131

chlorination in VB, PAA treatment in CN, and UV radiation in NO.

132

In VB, chlorination is carried out by a solution at 14% of sodium hypochlorite. The

133

dose is 0.05 mg L-1 of residual chlorine, and the average contact time is 45 minutes

134

with a flow of 550 m3 h-1.

135

The disinfection by PAA in CN is performed by a 15% PAA solution, the dose is

136

0.010 mg L-1, and the average contact time is 55 minutes with a flow of 125 m3 h-1.

137

The UV mediated disinfection in NO is carried out by a modular system composed

138

by 80 UV-C lamps, whit a dose of 25.8 mJ cm-2, and a contact time of 2 seconds

139

considering the suspension solid < 10mg L-1, a transmittance > 65%, and a flow of

140

2400 m3h-1. However, these theoretical parameters could not be reliably achieved

141

because of an exceptional algal bloom in the treatment during the experimental

142

monitoring, resulting in a slight reduction of the UV radiation disinfection efficiency.

143

We sampled water from the influx (A), the pre-disinfection effluent (B), and the

144

effluent after the disinfection treatment (C), for each WWTP. The samples were

145

collected every 3h for 24h, starting at 12:00 am: in VB on November 26, 2015; in NO

146

on December 12, 2015; in CN on January 21, 2016. The weather conditions for each

147

sampling campaign were optimal, without rain events during the sampling or in the

148

previous week and with air temperatures between -3.1 and 7.6°C. Once collected,

ACS Paragon Plus Environment

Page 6 of 35

Page 7 of 35

Environmental Science & Technology

149

samples were kept at 4°C in the dark and processed for further analyses within 8h

150

from the last sampling time point.

151 152

Sample processing for pre- and post-incubation analyses

153

Aliquots of 10 mL of each sample from each WWTP were used to measure the

154

microbiological variables by flow cytometry and epifluorescence microscopy:

155

bacterial cell number, bacterial size distribution, and intact/damaged cell proportions.

156

Aliquots of 200 mL from each 3h sample were combined to generate the 24h-

157

integrated samples for A, B, and C from each WWTP.

158

From the integrated samples, 50-250 mL were firstly filtered over a 126 µm pore-size

159

net (Sartorius, Germany), then concentrated on a 0.22 µm pore-size filter (47mm

160

diameter, Isopore polycarbonate, Merck Millipore Co., Germany), and finally stored

161

at -20°C until DNA extraction. The remaining integrated water samples were

162

organized in triplicate batches (200 mL each) for A, B, and C, and incubated (in a

163

climate controlled room, temp. 10±3°C) for 96 hours in the dark (incubation

164

experiment), gently shaken twice a day. At time (T) 0, 24, 48, 72, and 96, a 2 mL

165

sample from each replicate was collected to assess the microbiological variables

166

(described below) by flow cytometry and epifluorescence microscopy. At the end of

167

the experiment (T96), an aliquot of 50-190 mL was again collected from each

168

replicate and processed for DNA extraction as described above.

169 170

Microbiological variables (abundance, size distribution, cell wall conditions)

171

Bacterial abundances, size-class distribution (single, dividing cells and small

172

microcolonies; larger aggregates), and relative proportion of intact/damaged cells

173

were assessed for the 24h monitoring and (daily) for the incubation experiment, by

ACS Paragon Plus Environment

Environmental Science & Technology

174

flow cytometry (Accuri C6, BD Biosciences, USA) and confirmed by epifluorescence

175

microscopy. For the measurement of bacterial abundance and size distribution, an

176

aliquot of 1 mL for each liquid sample was stained with SYBR Green I (Life

177

Technologies, USA) solution (1%) for 15 minutes in the dark. Counts (on triplicate

178

samples) were set to a minimum of 2 × 106 events within the gate designed for

179

bacterial cells, and 5 × 102 events in the gates designed for larger bacterial

180

aggregates26. The correct assessment of single cells and aggregates in the

181

cytograms was confirmed by preliminary check of 3 selected samples per treatment

182

and per WWTP in epifluorescence microscopy (Axioplan; Zeiss, Germany) on DAPI

183

stained bacteria (for the complete protocol, see27).

184

The Nucleic Acid Double-Staining procedure to assess the proportion of damaged

185

cells was performed according to Amalfitano and coworkers28 by the concomitant

186

staining by membrane-permeable nucleic acid dye SYBR Green I (1:10000 final

187

concentration; Life Technologies, USA) and membrane-impermeable propidium

188

iodide (PI, 10 µg mL−1 final concentration). Cells with intact membranes appeared

189

then differentiated from those with damaged ones (red-marked since permeable to

190

PI29).

191

Gates design and calculation of events per mL for each measurement were carried

192

out with the Accuri C6 resident analysis software (BD Biosciences, USA).

193 194

DNA extraction, antibiotic resistance genes and int1quantification

195

The filters collected for DNA extraction from the integrated and from the post-

196

incubation samples were processed in triplicates by using the Ultraclean Microbial

197

DNA Isolation Kit (MoBio Laboratories, USA). Each extracted DNA was then ten-fold

198

diluted and tested for the abundance of the 16SrDNA gene (proxy of the overall

ACS Paragon Plus Environment

Page 8 of 35

Page 9 of 35

Environmental Science & Technology

199

bacterial abundance), of four antibiotic resistance genes (tetA, blaTEM, qnrS, and

200

ermB), and of the mobile element integron1 (int1 gene) by qPCR (performed by a

201

CFX Connect™ Real-Time PCR Detection System, Bio-Rad, USA). The primers and

202

the protocols used to quantify the 16SrDNA gene and the ARGs are described in18.

203

The

204

GATCGGTCGAATGCGTGT-3’) and intI1LC1 (5’-GCCTTGATGTTACCCGAGAG-

205

3’)30 following the same used for the quantification of the ARGs. The positive controls

206

are reported in Table S1. The standard curves were carried out as introduced by Di

207

Cesare et al.31. According to the methodology proposed by Bustin and colleagues32,

208

the limits of detection (LOD) for 16SrDNA, tetA, ermB, blaTEM, qnrS, and int1 were

209

58, 11, 54, 24, 6, and 40 copies µL-1, respectively. The specificity of the reactions

210

has been verified by melting curve analysis and by electrophoresis run as previously

211

described17. The mean value and standard deviation of the efficiencies for all tested

212

genes were 110.26±10.80%, the coefficient of regression was 0.99 for all tested

213

genes. The conversion of the gene concentrations from ng reaction-1 to copy µL-1

214

were carried out following the procedures indicated in Di Cesare and co-workers31.

215

qPCR results are presented as copies of ARG or int1 per copy of 16SrDNA gene

216

and per ng of extracted DNA. The ARGs overall relative abundance for each sample

217

is given as sum of the abundances of the single genes (with the exception of the

218

samples B and C in CN, where ermB was not quantified because of specificity

219

problems and thus excluded by further analyses). The interpretation of gene

220

abundances lower than the LOD but positive was made accordingly to Di Cesare et

221

al.18.

quantification

of

int1

was

carried

out

using

222 223

Statistical Analysis

ACS Paragon Plus Environment

primers

intI1LC5

(5’-

Environmental Science & Technology

224

A two-way RM-ANOVA was applied to test for significant differences between A, B,

225

and C in both the 24h monitoring of the three WWTPs and the 96h experimental

226

incubation. The tested microbiological variables were: (i) bacterial absolute

227

abundances (log transformed, and tested for normality of the model residuals), (ii)

228

aggregate and intact cell proportions (arcsin of the square root transformed,

229

normality of model residuals tested).

230

Relative gene abundances (arcsin of the square root transformed, again after testing

231

model residuals for normality) for single time points were compared by one-way

232

ANOVA, with means compared by Tukey’s post hoc test. Given the reduced number

233

of samples and the repeated analyses on the same experiments, for these analyses

234

we considered significant only p-values that were lower than 0.01. All ANOVAs were

235

carried out using the software JMP10 (SAS Institute Inc.).In order to address the

236

potential use of int1 as a proxy for ARGs, we performed two sets of analyses. First,

237

we explored whether the abundance of int1 was related to the abundance of ARGs,

238

regardless of WWTP of origin (CN, NO, VB), position in the disinfection steps (influx,

239

pre-disinfection, effluent), and post-incubation or not. For this step of the analyses,

240

we used a graphical representation of the relationship, considering all the dataset,

241

and each WWTP independently. We performed linear models to quantify the

242

strength (R2) and the significance (p-value) of the correlation between int1 and

243

ARGs, using log transformed data for both int1 and ARGs, in order to improve

244

normality fit of residuals in the statistical models.

245

Second, we explicitly addressed the question of how int1 could be used as a proxy

246

for ARGs, analysing the importance of different variables that could affect

247

abundance of ARGs: int1, WWTP of origin, position in the disinfection steps, and

248

regrowth. The rationale is that, if int1 were to be a good proxy for ARGs, it should

ACS Paragon Plus Environment

Page 10 of 35

Page 11 of 35

Environmental Science & Technology

249

have a very high partial R2 in comparison to the other variables included in the

250

models. We used linear models with log-transformed data for int1 and ARGs, and

251

obtained p-value and partial R2 for each of the analysed variables.

252

This part of the analyses was performed in R v3.1.233, with package asbio v1.1-534 to

253

obtain partial R2 from linear models. In the case when abundances of ARGs were in

254

principle quantifiable but for technical problems we could not obtain a reliable

255

measurement, we did not use ‘not available’ in the analyses, but we filled the empty

256

cell with the average values of that ARG across all the samples. This procedure will

257

allow us to include all the data in the analyses and will not affect type I error (i.e. the

258

incorrect rejection of a true null hypothesis); the bias will make it more difficult for the

259

analyses to reject the null hypothesis and thus to support significant differences.

260 261

Results

262

Removal of prokaryotic cells, aggregates and cells integrity before and after

263

incubation

264

The overall percentage of prokaryotic cell removal between A and C was 98%

265

(A=48.89±10.56 × 106 cell mL-1; C=0.90±0.25 × 106 cell mL-1), 86% (A=30.51±12.91

266

× 106 cell mL-1; C=4.32±0.32 × 106 cell mL-1), and 99% (A=62.23±16.72 × 106 cell

267

mL-1; C=0.38±0.09 × 106 cell mL-1) in VB, NO, and CN, respectively.

268

In VB and NO, the bacterial cell abundance was significantly reduced already

269

between A and B (pC, p92%) and

285

remained constant in VB (64%). A significant increase of damaged cells after the

286

disinfection was detected in CN where they rose from 8% (in B) to 68% (p=0.002)

287

(Figure1). In NO, the proportion of intact cells was significantly lower in A than in B

288

and C (p≤0.016), and no difference was observed between B and C (Figure1). The

289

evaluation of intact/damaged cells was not performed in VB step C because of the

290

presence of residual chlorine preventing the collection of the data.

291

The overall bacterial number throughout the incubation experiment was largely

292

comparable to the abundances detected at the corresponding step in the WWTPs

293

(Figures 1 and 2). In addition, growth trends in batch culture were similar: a small

294

increase over the first 24 hours followed by 36-48 hours of stationary growth and a

295

decrease after 72 hours. The total number of bacteria in A was, however, at least

296

one order of magnitude higher than that of B and C (p