Flexible Transparent Conductive Films with High ... - ACS Publications

Letter www.acsami.org

Flexible Transparent Conductive Films with High Performance and Reliability Using Hybrid Structures of Continuous Metal Nanofiber Networks for Flexible Optoelectronics Juyoung Park,†,‡ Byung Gwan Hyun,†,§ Byeong Wan An,†,§ Hyeon-Gyun Im,⊥ Young-Geun Park,§ Junho Jang,‡ Jang-Ung Park,*,§ and Byeong-Soo Bae*,‡ ‡

Wearable Platform Material Technology Center, Laboratory of Optical Materials and Coating (LOMC), Department of Materials Science and Engineering Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea § School of Materials Science and Engineering, Wearable Electronics Research Group, Ulsan National Institute of Science and Technology (UNIST) Ulsan Metropolitan City 44919, Republic of Korea ⊥ Creative and Fundamental Research Division, Korea Electrotechnology Research Institute (KERI), Changwon-si 51543, Republic of Korea S Supporting Information *

ABSTRACT: We report an Ag nanofiber-embedded glass-fabric reinforced hybrimer (AgNF-GFRHybrimer) composite film as a reliable and high-performance flexible transparent conducting film. The continuous AgNF network provides superior optoelectronic properties of the composite film by minimizing transmission loss and junction resistance. In addition, the excellent thermal/chemical stability and mechanical durability of the GFRHybrimer matrix provides enhanced mechanical durability and reliability of the final AgNF-GFRHybrimer composite film. To demonstrate the availability of our AgNF-GFRHybrimer composite as a transparent conducting film, we fabricated a flexible organic light-emitting diode (OLED) device on the AgNFGFRHybrimer film; the OLED showed stable operation during a flexing. KEYWORDS: transparent conducting electrode, silver nanofiber, glass-fabric reinforced plastic, all-in-one TCE/substrate platform, flexible organic light-emitting diode n a world where flexible and wearable electronics have become commonplace, optoelectronic devices such as displays, touch screen panels, organic light-emitting diodes (OLEDs), and solar cells (SCs) have been demanding flexibility and stretchability.1,2 To keep pace with this trend, transparent conducting electrode (TCE), which is the essential and crucial component of optoelectronic devices, is also expected to have flexible and stretchable properties.3−5 The most commonly used TCE material is indium-doped tin oxide (ITO). Its high transparency (∼90%), low sheet resistance (15 Ω sq−1), and chemical stability allow it to be widely used in modern electronics. However, the fragile nature of an oxide material and its high-cost vacuum-deposition process preclude it from being applied to next-generation flexible electronics. To replace ITO, various candidate materials have been proposed: graphene,

I

© XXXX American Chemical Society

carbon nanotubes (CNTs), conducting polymers, metal grids, and metal nanowires (NWs).6−8 Carbon materials such as graphene, CNTs, and conducting polymers have improved flexibility over ITO, but they have poor electrical conductivity and stability. Periodic metal grids have excellent conductivity because of their junction-free networks and metallic nature, but moiré pattern issue is inevitable.9,10 In this respect, random network metal NWs are considered the most promising candidate for flexible TCE materials. Because of their mechanical flexibility, high transparency with 100% transReceived: March 27, 2017 Accepted: June 6, 2017

A

DOI: 10.1021/acsami.7b04314 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX

Letter

ACS Applied Materials & Interfaces

Figure 1. (a) Schematic illustration of the electrospun AgNF embedded GFRHybrimer composite film fabrication procedure, and (b) the synthesis process of hybrimer resin with chemical structures. (c) A digital photograph of the AgNF-GFRHybrimer film, showing flexible and transparent properties. (d) Tilted and (e) surface SEM images of the AgNF-GFRHybrimer composite film. AFM images of electrospun AgNF (f) on a donor substrate and (g) embedded in GFRHybrimer matrix.

roughness and poor adhesion to the substrate still need to be addressed for sufficient reliability. In this study, we report on a high-performance all-in-one flexible TCE film(AgNF-GFRHybrimer) using a surfaceembedded continuous network of Ag nanofiber (NF) in thermostable and mechanically durable glass-fabric reinforced composite (GFRHybrimer) film.18,19 A single-line AgNF network effectively reduces the number of junctions, providing superior optoelectrical property (Ttot ≈ 91% and Rsh = 3 Ω sq−1). Moreover, the embedded structure with transparent and thermostable GFRHybrimer film not only solves surface roughness and poor adhesion problems but it also improves the thermal (60 h at 250 °C) and environmental stability (120 h at 85 °C/85% RH) by minimizing the exposure area of AgNF network. AgNF-GFRHybrimer composite film also shows outstanding mechanical durability and dimensional stability.

mittance from the empty space between NWs, the metal NWs have been extensively studied.11−13 However, metal NWs still have problems to be solved. When NWs are connected to form a conductive path, junctions between the NWs cause surface roughness and junction resistance. When applied to electronic devices, surface roughness might induce a device short, which is directly related to the reliability of the device, and the junction resistance degrades the electrical property of the TCE. On the basis of these considerations, studies on a reduced number of junctions or junction-free metal network TCEs have attracted much attention.14 For example, Ko et al. synthesized long Ag NWs by using multistep growth method to reduce the number of junctions.15 Recently, Song et al. proposed an electro-welding method to eliminate junctions, and Hauger used mechanical pressing to remove junctions.16,17 Furthermore, the surface B


Letter


For the comparison of optoelectrical properties, we display the latest Ag-based transparent conductors with the AgNFGFRHybrimer in the transmittance versus sheet resistance graph, as detailed in Figure 2.8,15,21−23 The AgNF-GFRHy-

To demonstrate the potential of the AgNF-GFRHybrimer as a next-generation flexible TCE film, we fabricated a flexible OLED on the film. Figure 1a illustrates the fabrication procedure of the AgNFGFRHybrimer composite film. First, two sheets of glass-fabric were placed on a hydrophobic-treated glass substrate and impregnated with hybrimer resin. The synthetic process for the hybrimer resin is depicted with chemical structures in Figure 1b. Subsequently, the electrospun AgNF network was transferred from a donor substrate to the surface of the hybrimer resin impregnating glass-fabric sheets. This sandwich-structured composite is pressed under vacuum-bag molding (∼14 MPa) and then exposed to UV light for 10 min to induce curing of the hybrimer resin. By removing the glass and donor substrate, a freestanding, transparent and flexible AgNF-GFRHybrimer composite film was fabricated, as seen in Figure 1c (see the Supporting Information for the experiment details). The surface topography of the film is depicted by scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses. A tilted SEM image (Figure 1d) showed that glassfabric sheets were sufficiently impregnated with hybrimer resin, and the continuous AgNF network is embedded into the surface of the hybrimer matrix without any disconnection. AFM images represent the surface morphology before (Figure 1f) and after AgNF embedding (Figure 1g). As seen in the AFM images, the AgNF-GFRHybrimer film exhibited a smooth surface profile, and the surface roughness was reduced by 11 times compared to before embedding (see also Figure S2). The most common way to evaluate the optoelectrical property of transparent conductor is by using a figure of merit (FoM). This performance index includes the physical expression of a transmittance and sheet resistance term so that it can helps to assess and compare the performance of TCEs. Generally, the FoM for nanomaterial TCEs is calculated using the following relation

Figure 2. A plot of total transmittance (Ttot) at 550 nm versus sheet resistance (Rsh) for the AgNF and latest Ag-based TCEs with figure of merit (FoM) plots.

brimer exhibited exceptionally superior optoelectrical property. This outstanding performance index results from an inherent continuous network of AgNF TCE; charge transport occurs along the one-dimensional (1D) metallic pathways, and thus ultralong length of conductive AgNF facilitates the reduction of sheet resistance by minimizing the number of juctions between the metal lines. Therefore, continuous network of 1D AgNF with ultrahigh aspect ratio can be a potential alternative to overcome the current limit of metal NWs.24−27 One of the primary considerations for applying TCEs to various applications is thermal stability. This is because a device is accompanied by high temperature in the process of fabricating or operating, such as annealing treatment and joule heating.28 In this work, we conducted elevating temperature tests with a 5 °C/min ramp rate to demonstrate thermal stability of the AgNF-GFRHybrimer film. For the comparison, an AgNF on a glass substrate was adopted as a reference. As seen in Figure 3a, the AgNF-GFRHybrimer endured higher temperature than the reference without resistance change. The AgNF-GFRHybrimer film maintained its initial resistance until 430 °C, whereas the AgNF on glass started to increase its resistance at 300 °C. This resistance increase in the reference sample is due to thermal instability of AgNF; at high temperature, AgNF melted down and coalesced, so the conductive path was broken, resulting in a resistance increase (see Figure S4d).29 However, the resistance of the AgNF network embedded in GFRHybrimer is retained even above 400 °C; the thermostable resin tightly holds and encapsulates the AgNF after curing to improve morphological instability of AgNF from melting down and coalescing. As a consequence, AgNF in the GFRHybrimer exhibited better thermal stability. Above 430 °C, the resistance of the AgNFGFRHybrimer film increased because of the decomposition of the hybrimer matrix.8 The decomposition of hybrimer matrix induces cracks, which cut off the conductive path of AgNF (Figure S4c). In an additional thermal aging test, the AgNFGFRHybrimer film showed stable electrical properties under 250 °C for 60 h as displayed in Figure S5a.

−2 ⎛ Z σop ⎞ T = ⎜1 + 0 ⎟ 2R sh σdc ⎠ ⎝

where T is total transmittance at 550 nm wavelength, Rsh is sheet resistance, Z0 is impedance of free space (377 Ω), and σdc/σop is FoM.20 According to the equation, a larger FoM value indicates the better optoelectrical properties. The UV−vis transmittance spectra of the AgNF-GFRHybrimer film with a variation of sheet resistance were displayed in Figure S3. By substituting the transmittance (T tot at 550 nm) and corresponding sheet resistance (Rsh) values in the above equation, we calculated the FoMs for the AgNF-GFRHybrimer. The results are summarized in Table 1; the performance index of the AgNF TCE showed the highest value of 1298 at Ttot = 90.98% and Rsh = 3 Ω sq−1, and average value was about 1200. Table 1. Total transmittance (Ttot) at 550 nm, sheet resistance (Rsh) and its standard deviation, and the corresponding figure of merit (FoM) value according to AgNF coverage area fraction AgNF area fraction

Rsh (Ω/sq)

Ttot at 550 nm (%)

FoM (σdc/σop)

0.20 0.24 0.32 0.43

7 ± 0.53 5 ± 0.60 3 ± 0.48 2.2 ± 0.40

95.81 93.48 90.98 87.32

1244 1100 1298 1221 C


Letter


Figure 3. Characteristics evaluation of AgNF-GFRHybrimer composite film. (a) Thermal stability of the composite film. A plot of normalized resistance change (R − R0/R0) vs temperature with a 5 °C/min ramp rate on a hot-plate. (b) Corrosion stability test with 5 wt % K2S solution. (c) Resistance change as a function of time under 85% relative humidity and at 85 °C for the environmental stability. (d) Repeated bending test of the AgNF embedded GFRHybrimer and the commercialized ITO/PET with 1 mm bending radius. (e) Adhesion stability test with a sticky tape and (f) abrasion-resistance test of AgNF-GFRHybrimer with an eraser.

was confirmed by X-ray diffraction (XRD) and SEM images. After exposure to K2S solution, both the AgNF on the glass and the AgNF-GFRHybrimer showed silver sulfide peaks in the XRD data, and silver sulfide particles surrounding the AgNF in SEM images (see Figure S6). However, the exposure area of AgNF to the K2S solution determines corrosion stability. By minimizing the exposure area of AgNF with the hybrimer matrix, the composite film can improve corrosion stability. Oxidation-resistance of the AgNF-GFRHybrimer was also tested under high temperature and high humidity condition. The test was carried out in an environmental chamber of 85% relative humidity at 85 °C; coexistence of high temperature and

Corrosion resistance of Ag-based TCEs is also of importance because Ag is easily corroded by sulfur gas in atmosphere.30 We used 5 wt % K2S aqueous solution to demonstrate corrosion stability of the AgNF-GFRHybrimer film. The K2S solution, like sulfur gas, reacts with AgNF and forms silver sulfide. This silver sulfide is an insulator, so the conductivity of the transparent conductor reduces as Ag2S particles surround the AgNF network. Figure 3b reveals that AgNF on the glass rapidly lost its conductivity after 150 s, whereas AgNF buried in GFRHybrimer retained its initial resistance value for 450 s; the initial conductivity of the AgNF-GFRHybrimer lasted three times longer than that of the reference. The formation of Ag2S D


Letter


Figure 4. Characteristics of a flexible OLED device using the AgNF-GFRHybrimer composite film. (a) Schematic illustrations of the flexible OLED layouts. (b) Photos of the light emission from the flexible device. (c) Curves on current density vs voltage and luminance vs voltage of the flexible OLED device. (d) Plot of its external quantum efficiency (EQE). (e) Normalized EL spectrum of the flexible OLED device.

film is caused by the mechanical durability of GFRHybrimer, the flexibility of AgNF, and the tightly encapsulated structure. The embedded structure also eased the delamination problems between the TCE and the substrate. As the hybrimer resin underwent a photo cross-linking process, it anchored the AgNF network firmly in the surface of the hybrimer matrix. As a result, unlike AgNF on the glass substrate, the AgNFGFRHybrimer composite film can preserve its electrical property even in a 100 repeatable tape test, without detaching the conductive network (see Figure 3e). We also evaluated the abrasion-resistance of the AgNFGFRHybrimer film by using an eraser. As seen in Figure 3f, the AgNF embedded in GFRHybrimer tolerated 30 erasing cycles without a resistance change, while the AgNF on the glass lost its conductivity after erasing one time only; the eraser scrubbed off the AgNF from the glass substrate. The smooth topography of embedded structure with the hybrimer matrix and encapsulation of AgNF improved the abrasion resistivity of the AgNF-GFRHybrimer film. To verify the availability of the AgNF-GFRHybrimer composite film as a flexible TCE substrate, we fabricate a flexible OLED on the AgNF-GFRHybrimer film. Figure 4a illustrates a schematic diagram of the flexible OLED device structure. In this approach, the top surface of AgNFGFRHybrimer film was spin-coated with a layer of poly(ethylenedioxythiophene):polystyrenes sulfonate (PEDOT:PSS) doped with dimethyl sulfoxide as a second transparent electrode for matching the work function. After coating a hole transport layer of PEDOT:PSS there, a lightemitting polymeric layer of PDY-132 (a green polymer known as “super yellow”, Merck & Co.) and an electron transport layer of poly [(9,9-bis(3′-(N,N-dimethylamino)Propyl)-3,7,-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) were coated subsequently. Then, the thermal evaporation of a 100 nm thick, Al cathode completed the OLED fabrication. Here, all layers except the Al cathode were formed using solution processing

high humidity accelerates the oxidation reaction of AgNF. As seen in Figure 3c, embedded AgNF in GFRHybrimer presented stable electrical property even after 120 h. On the other hand, AgNF on the glass showed a dramatic increase in resistance after 30 h. From XRD data (Figure S7b) and SEM images of the reference sample, the resistance increase was due to the formation of silver oxides. The formation of Ag2O nanoparticles along the AgNF broke the conductive network on the glass sample (Figure S7d). In contrast, the AgNF-GFRHybrimer film still had a smooth surface, with an intact conductive path after 120 h, as shown in Figure S7c. The embedded structure of the AgNF-GFRHybrimer film allows minimal exposure of the AgNF network to the external environment; the low oxygen transmission rate (2.95 × 103 cc mil m−2 day−1 @ 34.8 °C 100% O2) and water transmission rate (1.77 × 102 gm mil m−2 day−1 @ 37.8 °C under 90% RH) of hybrimer resin effectively protects the embedded AgNF, so enhanced oxidation stability of the AgNF TCE was achieved.29 The mechanical durability of a TCE film is another important requirement to verify the reliability when applied to flexible devices. For evaluating the mechanical durability of the composite film, we conducted bending, adhesion, and abrasion tests with a lab-made bending machine, a sticky tape, and an eraser, respectively. First, the bending test was performed in two ways with a 1 mm bending radius; the electrode surface was under compressive stress in inner bending, and under tensile stress in outer bending. To compare bending durability, we performed the bending tests with commercialized ITO/PET film. As illustrated in Figure 3d, the AgNF-GFRHybrimer film exhibited highly stable electrical performance over the 2000 repetitive bending cycles in both inner and outer bending. By contrast, the resistance of ITO/PET dramatically increased by 80 times in the outer bending and by 20 times in the inner bending after only five bending cycles, respectively. This stable bending performance of the AgNF-GFRHybrimer composite E


Letter


supported by a grant from the Korea Evaluation Institute of Industrial Technology (Project 10051337).

without any vacuum process. Figure 4b shows a photograph of the flexible OLED device using the AgNF-GFRHybrimer film. No significant degradation in the light emission of this flexible device occurs for bending to radii of curvature as small as 3.1 mm, as shown in Figure 4b. Figure 4c presents the curves on its current density versus the applied voltage (J−V) and its luminance versus the applied voltage (L−V), indicating the stable operations of this OLED with a turn-on voltage of 2 V and a maximum luminance of 59 918 cd/m2. Figure 4d exhibits the curve on its external quantum efficiency (EQE) with 4.57%, and Figure 4e shows the normalized electroluminescence (EL) spectrum of this OLED. AgNF encapsulated with hybrimer matrix solves the problem of shorting by providing smooth surface topography and thus enhances the reliability of OLED device. In addition, AgNF-GFRHybrimer allows the strong adhesion between TCE and the substrate, so that bending reliability of OLED devices can be improved. On the basis of these results, we demonstrated the potential of AgNFGFRHybrimer composite film as a robust and reliable TCE platform for next-generation flexible optoelectronics. In summary, we fabricated AgNF-GFRHybrimer composite film as a next-generation flexible TCE/film platform. The continuous network of AgNF provides excellent optoelectrical properties of the composite film by forming a 1D conductive path with reduced number of junctions. A transparent and thermostable GFRHybrimer improves the stability of AgNF TCE in high temperature, corrosive, and oxidative environments by minimizing the exposure of the AgNF network. In addition, this embedded structure addresses the surface roughness and adhesion issues of AgNF TCE in an effective manner. The stable performance of flexible OLED fabricated on AgNF-GFRHybrimer demonstrated the availability of the composite film as a promising flexible TCE platform in future optoelectronics.

■

■

(1) Im, H.-G.; An, B. W.; Jin, J.; Jang, J.; Park, Y.-G.; Park, J.-U.; Bae, B.-S. A High-Performance, Flexible and Robust Metal NanotroughEmbedded Transparent Conducting Film for Wearable Touch Screen Panels. Nanoscale 2016, 8 (7), 3916−3922. (2) Lee, J.; An, K.; Won, P.; Ka, Y.; Hwang, H.; Moon, H.; Kwon, Y.; Hong, S.; Kim, C.; Lee, C.; Ko, S. H. A Dual-Scale Metal Nanowire Network Transparent Conductor for Highly Efficient and Flexible Organic Light Emitting Diodes. Nanoscale 2017, 9 (5), 1978−1985. (3) Lee, H.; Hong, S.; Lee, J.; Suh, Y. D.; Kwon, J.; Moon, H.; Kim, H.; Yeo, J.; Ko, S. H. Highly Stretchable and Transparent Supercapacitor by Ag−Au Core−Shell Nanowire Network with High Electrochemical Stability. ACS Appl. Mater. Interfaces 2016, 8 (24), 15449−15458. (4) Hong, S.; Lee, H.; Lee, J.; Kwon, J.; Han, S.; Suh, Y. D.; Cho, H.; Shin, J.; Yeo, J.; Ko, S. H. Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications. Adv. Mater. 2015, 27 (32), 4744−4751. (5) Han, S.; Hong, S.; Ham, J.; Yeo, J.; Lee, J.; Kang, B.; Lee, P.; Kwon, J.; Lee, S. S.; Yang, M.-Y.; Ko, S. H. Fast Plasmonic Laser Nanowelding for a Cu-Nanowire Percolation Network for Flexible Transparent Conductors and Stretchable Electronics. Adv. Mater. 2014, 26 (33), 5808−5814. (6) Hecht, D. S.; Hu, L.; Irvin, G. Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures. Adv. Mater. 2011, 23 (13), 1482−1513. (7) Hu, L.; Wu, H.; Cui, Y. Metal Nanogrids, Nanowires, and Nanofibers for Transparent Electrodes. MRS Bull. 2011, 36 (10), 760−765. (8) Im, H.-G.; Jin, J.; Ko, J.-H.; Lee, J.-Y. J.; Lee, J.-Y. J.; Bae, B.-S. Flexible Transparent Conducting Composite Films Using a Monolithically Embedded AgNW Electrode with Robust Performance Stability. Nanoscale 2014, 6 (2), 711−715. (9) Jang, S.; Jung, W.-B.; Kim, C.; Won, P.; Lee, S.-G.; Cho, K. M.; Jin, M. L.; An, C. J.; Jeon, H.-J.; Ko, S. H.; Kim, T.-S.; Jung, H.-T. A Three-Dimensional Metal Grid Mesh as a Practical Alternative to ITO. Nanoscale 2016, 8 (29), 14257−14263. (10) Suh, Y. D.; Kwon, J.; Lee, J.; Lee, H.; Jeong, S.; Kim, D.; Cho, H.; Yeo, J.; Ko, S. H. Maskless Fabrication of Highly Robust, Flexible Transparent Cu Conductor by Random Crack Network Assisted Cu Nanoparticle Patterning and Laser Sintering. Adv. Electron. Mater. 2016, 2 (12), 1600277. (11) Moon, H.; Won, P.; Lee, J.; Ko, S. H. Low-Haze, AnnealingFree, Very Long Ag Nanowire Synthesis and Its Application in a Flexible Transparent Touch Panel. Nanotechnology 2016, 27 (29), 295201. (12) Suh, Y. D.; Hong, S.; Lee, J.; Lee, H.; Jung, S.; Kwon, J.; Moon, H.; Won, P.; Shin, J.; Yeo, J.; Ko, S. H. Random Nanocrack, Assisted Metal Nanowire-Bundled Network Fabrication for a Highly Flexible and Transparent Conductor. RSC Adv. 2016, 6 (62), 57434−57440. (13) Bari, B.; Lee, J.; Jang, T.; Won, P.; Ko, S. H.; Alamgir, K.; Arshad, M.; Guo, L. J. Simple Hydrothermal Synthesis of Very-Long and Thin Silver Nanowires and Their Application in High Quality Transparent Electrodes. J. Mater. Chem. A 2016, 4 (29), 11365− 11371. (14) Bergin, S. M.; Chen, Y.-H.; Rathmell, A. R.; Charbonneau, P.; Li, Z.-Y.; Wiley, B. J. The Effect of Nanowire Length and Diameter on the Properties of Transparent, Conducting Nanowire Films. Nanoscale 2012, 4 (6), 1996−2004. (15) Lee, J.; Lee, P.; Lee, H.; Lee, D.; Lee, S. S.; Ko, S. H. Very Long Ag Nanowire Synthesis and Its Application in a Highly Transparent, Conductive and Flexible Metal Electrode Touch Panel. Nanoscale 2012, 4 (20), 6408−6414. (16) Song, T.-B.; Chen, Y.; Chung, C.-H.; Yang, Y. M.; Bob, B.; Duan, H.-S.; Li, G.; Tu, K.-N.; Huang, Y.; Yang, Y. Nanoscale Joule

ASSOCIATED CONTENT

* Supporting Information S

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsami.7b04314. Experimental Section, AFM and SEM images, XRD patterns and transmittance graph of AgNF-GFRHybrimer film (PDF)

■

REFERENCES

AUTHOR INFORMATION

Corresponding Authors

*E-mail: [email protected]. *E-mail: [email protected]. ORCID

Hyeon-Gyun Im: 0000-0002-8750-4396 Byeong-Soo Bae: 0000-0001-9424-1830 Author Contributions †

J.P., B.G.H., and B.W.A. contributed equally to this work.

Notes

The authors declare no competing financial interest.

■

ACKNOWLEDGMENTS This work was supported by the Wearable Platform Materials Technology Center (WMC) funded by the National Research Foundation of Korea (NRF) Grant of the Korean Government (MSIP) (NRF-2016R1A5A1009926). This research was also F


Letter

ACS Applied Materials & Interfaces Heating and Electromigration Enhanced Ripening of Silver Nanowire Contacts. ACS Nano 2014, 8 (3), 2804−2811. (17) Hauger, T. C.; Al-Rafia, S. M. I.; Buriak, J. M. Rolling Silver Nanowire Electrodes: Simultaneously Addressing Adhesion, Roughness, and Conductivity. ACS Appl. Mater. Interfaces 2013, 5 (23), 12663−12671. (18) Jin, J.; Lee, J.-Y. J.; Jeong, S.; Yang, S.; Ko, J.-H.; Im, H.-G.; Baek, S.-W.; Lee, J.-Y. J.; Bae, B.-S. High-Performance Hybrid Plastic Films: A Robust Electrode Platform for Thin-Film Optoelectronics. Energy Environ. Sci. 2013, 6 (6), 1811−1817. (19) Jin, J.; Ko, J.-H.; Yang, S.; Bae, B.-S. Rollable Transparent GlassFabric Reinforced Composite Substrate for Flexible Devices. Adv. Mater. 2010, 22 (40), 4510−4515. (20) De, S.; King, P. J.; Lyons, P. E.; Khan, U.; Coleman, J. N. Size Effects and the Problem with Percolation in Nanostructured Transparent Conductors. ACS Nano 2010, 4 (12), 7064−7072. (21) Sciacca, B.; van de Groep, J.; Polman, A.; Garnett, E. C. Solution-Grown Silver Nanowire Ordered Arrays as Transparent Electrodes. Adv. Mater. 2016, 28 (5), 905−909. (22) Kim, H.-J.; Lee, S.-H.; Lee, J.; Lee, E.-S.; Choi, J.-H.; Jung, J.-H.; Jung, J.-Y.; Choi, D.-G. High-Durable AgNi Nanomesh Film for a Transparent Conducting Electrode. Small 2014, 10 (18), 3767−3774. (23) Kang, S.-B.; Kim, H.-J.; Noh, Y.-J.; Na, S.-I.; Kim, H.-K. Face-toFace Transferred Multicrystalline ITO Films on Colorless Polyimide Substrates for Flexible Organic Solar Cells. Nano Energy 2015, 11, 179−188. (24) Wu, H.; Hu, L.; Rowell, M. W.; Kong, D.; Cha, J. J.; McDonough, J. R.; Zhu, J.; Yang, Y.; McGehee, M. D.; Cui, Y. Electrospun Metal Nanofiber Webs as High-Performance Transparent Electrode. Nano Lett. 2010, 10 (10), 4242−4248. (25) Hsu, P.-C.; Kong, D.; Wang, S.; Wang, H.; Welch, A. J.; Wu, H.; Cui, Y. Electrolessly Deposited Electrospun Metal Nanowire Transparent Electrodes. J. Am. Chem. Soc. 2014, 136 (30), 10593−10596. (26) An, B. W.; Hyun, B. G.; Kim, S.-Y.; Kim, M.; Lee, M.-S.; Lee, K.; Koo, J. B.; Chu, H. Y.; Bae, B.; Park, J. Stretchable and Transparent Electrodes Using Hybrid Structures of Graphene−Metal Nanotrough Networks with High Performances and Ultimate Uniformity. Nano Lett. 2014, 14 (11), 6322−6328. (27) Huang, Y.; Bai, X.; Zhou, M.; Liao, S.; Yu, Z.; Wang, Y.; Wu, H. Large-Scale Spinning of Silver Nanofibers as Flexible and Reliable Conductors. Nano Lett. 2016, 16 (9), 5846−5851. (28) Khaligh, H. H.; Goldthorpe, I. a. Failure of Silver Nanowire Transparent Electrodes under Current Flow. Nanoscale Res. Lett. 2013, 8 (1), 235−241. (29) Liu, B.-T.; Huang, S.-X. Transparent Conductive Silver Nanowire Electrodes with High Resistance to Oxidation and Thermal Shock. RSC Adv. 2014, 4 (103), 59226−59232. (30) Kim, S. H.; Choi, W. I.; Kim, K. H.; Yang, D. J.; Heo, S.; Yun, D.-J. Nanoscale Chemical and Electrical Stabilities of GrapheneCovered Silver Nanowire Networks for Transparent Conducting Electrodes. Sci. Rep. 2016, 6 (1), 33074−33086.

G


Flexible Transparent Conductive Films with High ... - ACS Publications

Recommend Documents