Gel-Based Artificial Photonic Skin to Sense a Gentle Touch by

Apr 15, 2019 - Gel-Based Artificial Photonic Skin to Sense a Gentle Touch by Reflection ... Department of Physics, Key Laboratory of Micro- and Nano-P...
0 downloads 0 Views 1MB Size
Subscriber access provided by UNIV OF LOUISIANA

Letter

Gel-based Artificial Photonic Skin to Sense a Gentle Touch by Reflection Fan Hu, Lin Zhang, Wenzhe Liu, Xiaoxiao Guo, Lei Shi, and Xiang Yang Liu ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.9b01649 • Publication Date (Web): 15 Apr 2019 Downloaded from http://pubs.acs.org on April 15, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Gel-based Artificial Photonic Skin to Sense a Gentle Touch by Reflection Fan Hu,†,‡ Lin Zhang,† Wenzhe Liu,§ Xiaoxiao Guo,† Lei Shi,*,§ and Xiang Yang Liu*,†,⊥

†Research

Institute for Biomimetics and Soft Matter, College of Materials, College of Physical

Science and Technology, Xiamen University, Xiamen 361005, P. R. China Email: [email protected] ‡Advanced

Soft Matter Group, Department of Chemical Engineering, Delft University of Technology, Van der Maasweg 9, 2629 HZ Delft, The Netherlands

§Department

of Physics, Key Laboratory of Micro- and Nano-Photonic Structures (Ministry of

Education), and State Key Laboratory of Surface Physics, Fudan University, Shanghai 200433, P. R. China Email: [email protected] ⊥Department

of Physics, National University of Singapore, 2 Science Drive 3, 117542 Singapore, Singapore

KEYWORDS: artificial photonic skin (p-skin), gel, tactile sensing, reflection, photonic crystal

ACS Paragon Plus Environment

1

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 21

ABSTRACT

This work demonstrates that engineering three-dimensional photonic crystal (3DPC) structure in highly flexible gel is a potential method to achieve flexible tactile artificial photonic skin (p-skin) for future visible light communication (VLC). We investigated the photonic output modes of 3DPC-coated gel-based pressure sensors and explored their ability to sense low pressures (< 10 kPa) through reflection. Such sensors with high sensitivity, fast response and adjustable detection range can be fabricated in arrays of dots covering large, complex/uneven surfaces, and are promising in the development of stimuli-responsive soft materials for future artificial intelligence, health monitoring and photonic communication systems.

ACS Paragon Plus Environment

2

Page 3 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

The development of flexible, sensitive artificial skins that can respond to tactile stimuli in the environment are of paramount importance for future generations of smart robots, implantable artificial skins and physiological monitoring systems. As an uncommon tactile sensing technology, artificial photonic skin (p-skin) devices have a number of advantages, not only supported by rapidly developing techniques in applied spectroscopy, but also fueled by the need for advanced photonic communications. In addition, p-skin devices offer a high degree of stability because they are far less susceptible to corruption by environmental influences such as electromagnetic fields than electrical/magnetic devices. Therefore, we focus on the p-skin technology in this article. However, the majority of reported photonic pressure sensors have shown low sensitivity, slow recovery (in minutes or more), large hysteresis, and poor flexibility and moldability in low-pressure regimes (