Iodine Adsorption in Metal Organic Frameworks in the Presence of

Mar 16, 2018 - Used nuclear fuel reprocessing represents a unique challenge when dealing with radionuclides such as isotopes of 85Kr and 129I2 due to ...
0 downloads 8 Views 657KB Size
Download PDF
Subscriber access provided by - Access paid by the | UCSB Libraries

Iodine Adsorption in Metal Organic Frameworks in Presence of Humidity Debasis Banerjee, Xianyin Chen, Sergey Lobanov, Anna M. Plonka, Xiaojun Chan, John Daly, Taejin Kim, Praveen K. Thallapally, and John Parise ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.8b02651 • Publication Date (Web): 16 Mar 2018 Downloaded from http://pubs.acs.org on March 18, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Iodine Adsorption in Metal Organic Frameworks in Presence of Humidity Debasis Banerjee,1 Xianyin Chen,2 Sergey S. Lobanov,3,* Anna M. Plonka,4 Xiaojun Chan,4 John A. Daly,3 Taejin Kim,4 Praveen K. Thallapally,1,* and John B. Parise2,3 1

Physical and Computational Science Directorate, Pacific Northwest National Laboratory, Richland, WA 99352, USA Department of Chemistry, Stony Brook University, Stony Brook, NY 11794, USA 3 Department of Geosciences, Stony Brook University, Stony Brook, NY 11794, USA 4 Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, NY 11794, USA 2

ABSTRACT: Used nuclear fuel reprocessing represents a unique challenge when dealing with radionuclides such as isotopes of 85 Kr and 129I2 due to their volatility and long half-life. Efficient capture of 129I2 (t1/2 = 15.7 ×106 million years) from the nuclear waste stream can help reduce the risk of releasing I2 radionuclide into the environment and/or potential incorporation into the human thyroid. Metal organic frameworks have the reported potential to be I2 adsorbents but the effect of water vapor, generally present in the reprocessing off-gas stream, is rarely taken into account. Moisture-stable porous metal organic frameworks that can selectively adsorb I2 in the presence of water vapor are thus of great interest. Herein, we report on the I2 adsorption capacity of two microporous metal organic frameworks at both dry and humid conditions. Single crystal x-ray diffraction and Raman spectroscopy reveal distinct sorption sites of molecular I2 within the pores in proximity to the phenyl- and phenol-based linkers stabilized by the I···π and I···O interactions, which allow selective uptake of iodine.

129

I, t1/2 = 15.7×106 y);6-9 thus, there is a need for efficient capture of these iodine species. However, selective removal of iodine from water-saturated gas streams is very challenging due to its low concentration (~ 22 ppm of I2) and even smaller concentrations of organic iodides (e.g. CH3I, C2H5I), HI, and HOI.5, 10

Keywords: MOF, porous structures, organic framework, used nuclear fuel, iodine, radioactive waste, single crystal xray diffraction, Raman spectroscopy The total world energy demand is set to increase rapidly with the rise in global population and continuous economic growth of the developing world. In the meantime, the search for an efficient, reliable, low-emission energy source continues to be a global interdisciplinary research challenge.1 Solar and wind energy are often considered viable alternatives for our current fossil-fuel-based energy economy, but their intermittent nature of energy production leads to reliability concerns.2 As such, the quest for a reliable, non-fossil-fuel energy economy is becoming more important from a national security and economic development standpoint. Nuclear energy is a high-density, emission-free energy source often considered a cleaner option for continuous energy production.3 However, the successful mass production of nuclear power is associated with the implementation of an economically viable, industrial-scale process to properly sequester and mitigate the fission-related highly radioactive waste (e.g., used nuclear fuel).4 During the fission of nuclear fuels, several gaseous radioactive products such as 85Kr, 127Xe, and 129I are formed, which must be efficiently captured and securely stored.5 For example, various radionuclides of I2, hydrogen iodide (HI), and alkyl halides possess serious health hazards due to their involvement in metabolic processes and long half-lives (e.g.,

Accordingly, a large number of materials and methods were developed over the years to selectively remove I2 and organic iodides with high decontamination factors.5 Among different methods, caustic or acidic scrubbing solutions were used at a reprocessing facility for gaseous I2 control, but faced recyclability issues.5 Porous carbon, graphene-based nanomaterials, MoSx amorphous aerogel, and aluminophosphate zeolites were some of the materials tested for I2 adsorption.5, 11, 12 Silver exchanged zeolites (e.g., AgZ) were found to be very promising materials as solid adsorbents for I2 capture during reprocessing,5, 11 yet the search for affordable porous solid-state adsorbents as alternatives with better adsorption capacity and kinetics is still ongoing.6 Among the next-generation of solid-state adsorbent materials, Hofmann-type structures, covalent organic frameworks, and metal organic frameworks (MOFs) are considered leading candidates for I2 capture due to their tunable pore architectures.6-9, 13-24 Previous studies showed exceptional total I2 uptake of MOFs in non-polar solvents (e.g., hexane). For example, Nenoff and coworkers reported 1

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

very high I2 adsorption properties in ZIF-8 (~125 wt % I2), but the process is found to be irreversible because of its chemisorptive nature.7 Apart from the uptake capacity, reversibility, and cost, tolerance to water is one of the limiting factors for the choice of suitable material. Indeed, there is a significant amount of water vapor present in the off-gas stream and materials that selectively capture I2 over water can enable economic savings. Only several MOFs, however, have been tested for iodine uptake at condition of high humidity. Sava, et al. 25 have reported on a very high iodine uptake of Cu-BTC (~ 175 wt.%) in a humid gas stream. Also, Li and coworkers recently reported high organoiodide uptake in a postfunctionalized, thermally stable MOF at variable humidity.20 Here we build on these works, by evaluating materials with I2 adsorption capacity in the presence of water vapor. In this communication, we report on the iodine adsorption capacity of two microporous MOFs, SBMOF-1 and SBMOF-226, 27 in the presence of water vapor, as both structures maintain crystallinity after exposure to 75% relative humidity (RH) for at least two months of storage.28 The mechanisms of adsorption were evaluated by means of single crystal and powder X-ray diffraction (XRD), Raman spectroscopy, and thermogravimetric analysis coupled with mass spectrometry.

aqueous solutions degrades crystallinity of the frameworks.

SBMOF-1 [Ca(sdb); sdb: 4,4’-sulfonyldibenzoate] and SBMOF-2 [Ca(tcpb); tcpb: 1,2,4,5-tetrakis(4carboxyphenyl)benzene] were synthesized following the previously reported procedures.26, 27 The diamond-shaped, one dimensional channels within SBMOF-1 were built by vshaped sdb organic linkers. SBMOF-2 was a microporous, three-dimensional MOF network with isolated CaO6 octahedra connected by linkers, possessing two distinct adsorption sites in channel of type-I and type-II. Similar to SBMOF-1, type-I channels in SBMOF-2 were built by phenyl rings with delocalized π-electron clouds and H atoms pointing into the channel, providing sorption sites for gas molecules. The halfdeprotonated tcpb linkers in SBMOF-2 formed polar –OH groups in type-II channel.

Figure 1. I2 uptake curves and color changes for the investigated at room temperature (A) SBMOF-1 and (B) SBMOF2.

To understand the effect of water on I2 adsorption, experiments were conducted using controlled humidity. For example, constant RH of 33% and 43% was obtained with saturated aqueous solution of calcium chloride and zinc nitrate in a closed vessel. The humidity chamber was kept at room temperature for ~24 hours to ensure uniform conditions before conducting the experiments. The uptake experiments were again performed with the vapor deposition technique. After 24 hours, SBMOF-1 showed a ~15 wt% uptake, while SBMOF-2 showed a much higher 35 wt% uptake. Thermogravimetricmass spectrometry analysis showed that HI was released upon heating at T ~120-180°C (Fig. S1) with the total weight loss of 30.5 wt% for the sample loaded at 43% RH. This is lower than the iodine uptake in dry air (42.7 wt%) and can be attributed to a combined sorption of I2 and H2O and/or an increased concentration of adsorbed HI species. The release of HI at 150-250°C has been documented for Cu-BTC loaded in ~1:1 I2:H2O vapor; HI was formed upon desorption as revealed by IR spectroscopy. 9

Powdered samples of SBMOF-1 and SBMOF-2 were activated at 75° and 215°C, respectively, and held in vacuum for 12 hours before I2 adsorption experiments. The initial I2 loading experiments were performed by vapor-phase deposition technique as a function of time. Iodine adsorption into the MOFs was evident from the apparent change in color and mass with increasing exposure to I2 (Fig. 1). The maximum I2 uptake on SBMOF-1 was 22.6(2) wt%, indicating that after ~2 days SBMOF-1 reached the saturation. I2 loading on SBMOF-2 occurred similarly, with color change from light yellow to brown and then dark purple. The I2 uptake curve of SBMOF-2 showed a faster adsorption kinetic than SBMOF-1, with a maximum sorption capacity of 42.7(2) wt% at around 15 hours. After sorption, I2 may be evacuated from SBMOF-1 and SBMOF-2 at 200℃ in under 12h. Visually, the MOFs remain intact over several consecutive loading-unloading cycles. Submersion in aqueous H2O slowly degrades SBMOF1 and SBMOF-2, while aqueous acidic conditions rapidly dissolve these frameworks. Nonetheless, SBMOF-1 and SBMOF-2 are stable under high humidity even in the presence of HI produced upon iodine exposure to 43% RH. While SBMOFs are stable at relatively high humidity, storage in 2

ACS Paragon Plus Environment

Page 2 of 5

Page 3 of 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces hydrogen atoms directed into the channels providing potential I···H force, while in SBMOF-1 hydrogen atoms are directed along the wall. Interestingly, the sorption sites of iodine and water27 in SBMOF-2 are crystallographically very close (Fig. S2). Thus, the observed preferential selectivity of I2 over H2O in SBMOF-2 may be due to the pore blocking by I2 in combination with its hydrophobic character, as has previously been suggested for Cu-BTC.25 Simulated powder XRD patterns derived from single crystal XRD were consistent with experimental powder XRD observations (Fig. S3) and confirmed that the MOFs maintain structural topology after I2 loading at either dry or controlled humidity. Both frameworks retained their topologies and crystallinities after I2 removal by heating up to 290° and 320°C for SBMOF-1 and SBMOF-2, respectively. Finally, we employed Raman spectroscopy to gain further insights into the mechanisms of I2 sorption in SBMOF-1 and SBMOF-2 (Fig. 3). A single, strong, and sharp Raman band centered at 210 cm-1 was observed in I2@SBMOF-1 due to its homogeneous sorption environment with one type of channel. The band assignment to I-I stretching was straightforward as the energy of this vibration was similar to that in benzene-I2 complexes (~205 cm-1).29 The observed intense overtones of II stretching were also typical of I2-bearing complexes. Interestingly, the I-I stretching in ‘free’ I2 dissolved in nonpolar solvents is ~211 cm-1, suggesting that phenyl···I interaction was relatively weak in the lattice of SBMOF-1. In contrast, iodine sorption in type-I (phenyl) and type-II (phenol) channels of SBMOF-2 produced several distinct vibrational features. The I-I stretching in the type-I channel was responsible for the sharp and strong Raman band centered at 201 cm-1. The spectroscopic similarity of this band to that observed in I2@SBMOF-1 was due to the chemical similarity of the sorption sites. However, the decreased frequency of I-I stretching in type-I channel of SBMOF-2 suggests a stronger phenyl···I interaction than that in SBMOF-1. The broad bands at ~170 cm-1 (compared to 180 cm-1 in crystalline I2)30 were assigned to the iodine stretching at the two sorption sites within the type-II channel, as stronger I···O charge-transfer interaction would decrease and broaden the vibrational frequency of I2.29 In addition, the spectroscpic similarity of MOFs loaded at dry and controlled humidity conditions suggested the iodine speciation within these MOFs was the same. This ruled out a signigicant sorption of HI at 43% RH by SBMOF-2, which was also supported by the absence of the H-I stretching at ~2300 cm-1 in the measured spectra (Fig. S4) and suggested HI production upon unloading of I2 from MOFs.9 Likewise, the absence of O-H stretching in the Raman spectra of SBMOF-1 and SBMOF-2 loaded at 43% RH confirmed the preferencial adsorption of I2 over H2O. Overall, the results of Raman spectroscopy were consistent with the adsorption mechanisms of I2 in SBMOF-1 and SBMOF-2 inferred from single crystal XRD and provided independent spectroscopic evidence for the extraordinary iodine adsorption capacity of SBMOF-2 at both dry and high humidity conditions.

Figure 2. Structures of I2@SBMOF-1 and I2@SBMOF-2. Blue polyhedra represent Ca, red sphere - O, black wire - C, purple/pink sphere - I, yellow sphere - S and pink wire - H.

To understand the extraordinary iodine capacity and to gain insights into its adsorption mechanism, we performed single crystal X-ray diffraction (exposed to dry I2 for 4 and 2 days, respectively). Full crystallographic details are provided in Table S1. Positions of adsorbed molecules in I2@SBMOF-1 and I2@SBMOF-2 were determined at -173°C. The lattice dimension b increases from 10.7515(9) Å in the activated sample to 11.1129(5) Å in the I2@SBMOF-2, and the three angles of the unit cell expand resulting in a 1.9% volume change, while the change in the unit cell volume of SBMOF-1 upon I2 adsorption is < 0.5%. I2 molecules in I2@SBMOF-1 are oriented in the channel running in the b direction, with I··· (phenyl ring center) contact distance of 3.356 Å (Fig. 2). At the same time, I2 molecules in type-I channel of SBMOF-2 are highly ordered and point to the phenyl ring centers, with a I(1)··· contact distance of 3.470(2) Å. These observations suggest that phenyl-iodine interactions are important for the I2 uptake and selectivity. In addition, iodine occupies two distinct sites in type-II channels in the vicinity of –OH groups with I(2,3)···O distances of 3.556 and 3.285 Å. The occupancy of type-II channels is higher than that of type-I. In short, the prominent adsorbate-adsorbent interactions in both SBMOF-1 and SBMOF-2 are I··· (phenyl ring) and I···O, with the first appearing in both structures and the latter only in SBMOF-2. Phenyl ring was previously reported as an effective sorption site for gases like CO2, hydrocarbon, and atomic gases.3, 28 The difference in I2 uptake can be described as a combination between the surface areas of the two frameworks (145.15 and 195 m2/g in SBMOF-1 and SBMOF-2, respectively)27 and differences in framework-adsorbed I2 interaction. Though having phenyl rings in the channels of both SBMOF-1 and SBMOF-2 structures, the different structural configurations could explain the different uptake of I2: SBMOF-2 comprises

In summary, we evaluated the I2 adsorption capacity and its sorption mechanisms in two microporous MOFs at dry conditions and in presence of humidity (33% RH and 43% 3

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 5

The manuscript was written through contributions of all authors.

RH). The results showed that the MOF can adsorb noticeable amount of I2 at room temperature. The preferential adsorption of I2 over water in a humid environment occurs due to the specific phenyl ring-halogen interactions in the channels.

ACKNOWLEDGMENT PKT and DB was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Division of Materials Sciences and Engineering, under Award KC020105-FWP12152. PNNL is a multiprogram national laboratory operated for the U.S. Department of Energy by Battelle Memorial Institute under Contract DE-AC05-76RL01830. X.C., A.M.P. and J.B.P. were supported by the National Science Foundation grant DMR1231586. Structure of I2@SBMOF-1 was determined at the Advanced Light Source station 11.3.1, Lawrence Berkeley National Laboratory, principally supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Structure of I2@SBMOF-2 was determined using the Stony Brook University single crystal diffractometer, obtained through the support of the NSF (grant number CHE-0840483).

Reference (1) Chu, S.; Majumdar, A., Opportunities and challenges for a sustainable energy future. Nature 2012, 488, 294-303. (2) Sovacool, B. K., The intermittency of wind, solar, and renewable electricity generators: Technical barrier or rhetorical excuse? Util. Policy 2009, 17, 288-296. (3) Banerjee, D.; Cairns, A. J.; Liu, J.; Motkuri, R. K.; Nune, S. K.; Fernandez, C. A.; Krishna, R.; Strachan, D. M.; Thallapally, P. K., Potential of Metal-Organic Frameworks for Separation of Xenon and Krypton. Acc. Chem. Res. 2015, 48, 211-219. (4) Blue Ribbon Comission on America’s Energy Future: Report to the Secretary of Energy 2012. (5) Soelberg, N. R.; Garn, T. G.; Greenhalgh, M. R.; Law, J. D.; Jubin, R.; Strachan, D. M.; Thallapally, P. K., Radioactive Iodine and Krypton Control for Nuclear Fuel Reprocessing Facilities. Sci. Technol. Nucl. Install. 2013, 2013, 1-12. (6) Chapman, K. W.; Chupas, P. J.; Nenoff, T. M., Radioactive Iodine Capture in Silver-Containing Mordenites through Nanoscale Silver Iodide Formation. J. Am. Chem. Soc. 2010, 132, 8897-8899. (7) Sava, D. F.; Rodriguez, M. A.; Chapman, K. W.; Chupas, P. J.; Greathouse, J. A.; Crozier, P. S.; Nenoff, T. M., Capture of volatile iodine, a gaseous fission product, by zeolitic imidazolate framework-8. J. Am. Chem. Soc. 2011, 133, 12398-12401. (8) Sava, D. F.; Garino, T. J.; Nenoff, T. M., Iodine Confinement into Metal–Organic Frameworks (MOFs): Low-Temperature Sintering Glasses To Form Novel Glass Composite Material (GCM) Alternative Waste Forms. Ind. Eng. Chem. Res. 2012, 51, 614-620. (9) Sava, D. F.; Chapman, K. W.; Rodriguez, M. A.; Greathouse, J. A.; Crozier, P. S.; Zhao, H. Y.; Chupas, P. J.; Nenoff, T. M., Competitive I-2 Sorption by Cu-BTC from Humid Gas Streams. Chem. Mater. 2013, 25, 2591-2596. (10) Riley, B. J.; Vienna, J. D.; Strachan, D. M.; McCloy, J. S.; Jerden, J. L., Materials and processes for the effective capture and immobilization of radioiodine: A review. J. Nucl. Mater. 2016, 470, 307-326. (11) Sun, H.; La, P.; Zhu, Z.; Liang, W.; Yang, B.; Li, A., Capture and reversible storage of volatile iodine by porous carbon with high capacity. J. Mater. Sci. 2015, 50, 7326-7332. (12) Subrahmanyam, K. S.; Malliakas, C. D.; Sarma, D.; Armatas, G. S.; Wu, J.; Kanatzidis, M. G., Ion-Exchangeable Molybdenum Sulfide Porous Chalcogel: Gas Adsorption and Capture of Iodine and Mercury. J. Am. Chem. Soc. 2015, 137, 13943-13948. (13) Yin, Z.; Wang, Q. X.; Zeng, M. H., Iodine Release and Recovery, Influence of Polyiodide Anions on Electrical Conductivity and Nonlinear Optical Activity in an Interdigitated and Interpenetrated Bipillared-Bilayer Metal-Organic Framework. J. Am. Chem. Soc. 2012, 134, 4857-4863. (14) Falaise, C.; Volkringer, C.; Facqueur, J.; Bousquet, T.; Gasnot, L.; Loiseau, T., Capture of iodine in highly stable metal-organic frameworks: a systematic study. Chem. Commun. 2013, 49, 10320-10322.

Figure 3. Raman spectra of single crystal SBMOF-1 (top) and SBMOF-2 (bottom). Excitation wavelength was 514 nm.

ASSOCIATED CONTENT This material is available free of charge via the Internet at http://pubs.acs.org. Supporting Information. Experimental description, TG-MS (Fig. S1), sorption sites of H2O and I2 in SBMOF-2 (Fig. S2), powder XRD (Fig. S3), and Raman data (Fig. S4). Supplementary Table S1 contains crystallographic data for I2@SBMOF-1 and I2@SBMOF-2.

AUTHOR INFORMATION Corresponding Authors * E-mail: [email protected] * E-mail: [email protected]

Author Contributions 4

ACS Paragon Plus Environment

Page 5 of 5

ACS Applied Materials & Interfaces (15) Pei, C.; Ben, T.; Xu, S.; Qiu, S., Ultrahigh iodine adsorption in porous

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Iodine Molecules into Triple-Helical Chains within Robust Metal-Organic Frameworks. J. Am. Chem. Soc. 2017, 139, 16289-16296. (23) Small, L. J.; Nenoff, T. M., Direct Electrical Detection of Iodine Gas by a Novel Metal-Organic-Framework-Based Sensor. ACS Appl. Mater. Interfaces 2017, 9, 44649-44655. (24) Sava Gallis, D. F.; Ermanoski, I.; Greathouse, J. A.; Chapman, K. W.; Nenoff, T. M., Iodine Gas Adsorption in Nanoporous Materials: A Combined Experiment Modeling Study. Ind. Eng. Chem. Res. 2017, 56, 2331-2338. (25) Sava, D. F.; Chapman, K. W.; Rodriguez, M. A.; Greathouse, J. A.; Crozier, P. S.; Zhao, H. Y.; Chupas, P. J.; Nenoff, T. M., Competitive I2 Sorption by Cu-BTC from Humid Gas Streams. Chem. Mater. 2013, 25, 2591-2596. (26) Banerjee, D.; Zhang, Z.; Plonka, A. M.; Li, J.; Parise, J. B., A Calcium Coordination Framework Having Permanent Porosity and High CO2/N2 Selectivity. Cryst. Growth Des. 2012, 12, 2162-2165. (27) Chen, X. Y.; Plonka, A. M.; Banerjee, D.; Krishna, R.; Schaef, H. T.; Ghose, S.; Thallapally, P. K.; Parise, J. B., Direct Observation of Xe and Kr Adsorption in a Xe-Selective Microporous Metal-Organic Framework. J. Am. Chem. Soc. 2015, 137, 7007-7010. (28) Plonka, A. M.; Chen, X. Y.; Wang, H.; Krishna, R.; Dong, X.; Banerjee, D.; Woerner, W. R.; Han, Y.; Li, J.; Parise, J. B., Light Hydrocarbon Adsorption Mechanisms in Two Calcium-Based Microporous Metal Organic Frameworks. Chem. Mater. 2016, 28, 16361646. (29) Klaboe, P., Raman Spectra of Some Iodine Bromine and Iodine Monochloride Charge-Transfer Complexes in Solution. J. Am. Chem. Soc. 1967, 89, 3667-3676. (30) Anderson, A.; Sun, T. S., Raman spectra of molecular crystals I. Chlorine, bromine, and iodine. Chem. Phys. Lett. 1970, 6, 611-616.

organic frameworks. J. Mat. Chem. A 2014, 2, 7179-7187. (16) He, J.; Duan, J.; Shi, H.; Huang, J.; Huang, J.; Yu, L.; Zeller, M.; Hunter, A. D.; Xu, Z., Immobilization of Volatile and Corrosive Iodine Monochloride (ICl) and I2 Reagents in a Stable Metal–Organic Framework. Inorg. Chem. 2014, 53, 6837-6843. (17) Yan, Z.; Yuan, Y.; Tian, Y.; Zhang, D.; Zhu, G., Highly Efficient Enrichment of Volatile Iodine by Charged Porous Aromatic Frameworks with Three Sorption Sites. Angew. Chem., Int. Ed. Engl. 2015, 54, 1273312737. (18) Chae, S. H.; Kim, H. C.; Lee, Y. S.; Huh, S.; Kim, S. J.; Kim, Y.; Lee, S. J., Thermally Robust 3-D Co-DpyDtoIP-MOF with Hexagonally Oriented Micropores: Formation of Polyiodine Chains in a MOF Single Crystal. Cryst. Growth Des. 2015, 15, 268-277. (19) Massasso, G.; Long, J.; Guerin, C.; Grandjean, A.; Onida, B.; Guari, Y.; Larionova, J.; Maurin, G.; Devautour-Vinot, S., Understanding the Host/Guest Interactions in Iodine/Hofmann-Type Clathrate Ni(pz)[Ni(CN)4] System. J. Phys. Chem. C 2015, 119, 9395-9401. (20) Li, B.; Dong, X.; Wang, H.; Ma, D.; Tan, K.; Jensen, S.; Deibert, B. J.; Butler, J.; Cure, J.; Shi, Z.; Thonhauser, T.; Chabal, Y. J.; Han, Y.; Li, J., Capture of organic iodides from nuclear waste by metal-organic framework-based molecular traps. Nature Commun. 2017, 8, 485. (21) Yin, Z. J.; Xu, S. Q.; Zhan, T. G.; Qi, Q. Y.; Wu, Z. Q.; Zhao, X., Ultrahigh volatile iodine uptake by hollow microspheres formed from a heteropore covalent organic framework. Chem. Commun. 2017, 53, 72667269. (22) Zhang, X. R.; da Silva, I.; Godfrey, H. G. W.; Callear, S. K.; Sapchenko, S. A.; Cheng, Y. Q.; Vitorica-Yrezabal, I.; Frogley, M. D.; Cinque, G.; Tang, C. C.; Giacobbe, C.; Dejoie, C.; Rudic, S.; RamirezCuesta, A. J.; Denecke, M. A.; Yang, S. H.; Schroder, M., Confinement of

Table of Contents Graphic

5

ACS Paragon Plus Environment