Nanostructures via Noncovalent Synthesis: 144 ... - ACS Publications

A. N. Petelski , Darío J. R. Duarte , S. C. Pamies , N. M. Peruchena , G. L. Sosa .... Moreno , María del Carmen Mateo , Ana Sánchez-Migallón , Gema V...
0 downloads 0 Views 264KB Size
J. Org. Chem. 2001, 66, 8297-8301

8297

Nanostructures via Noncovalent Synthesis: 144 Hydrogen Bonds Bring Together 27 Components Vasile Paraschiv,† Mercedes Crego-Calama,† Roel H. Fokkens,† Clemens J. Padberg,‡ P. Timmerman,*,† and David N. Reinhoudt*,† Laboratory of Supramolecular Chemistry and Technology and Materials Science and Technology of Polymers, MESA+ Research Institute, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands [email protected] Received June 8, 2001

This paper describes the spontaneous and reversible assembly of ∼20 kDa synthetic hydrogenbonded assemblies via the formation of 144 cooperative hydrogen bonds. These nanostructures (∼3.0 × 5.5 nm), consisting of 27 different components, have been carefully characterized using a combination of 1H NMR spectroscopy, MALDI-TOF MS using Ag+-labeling, gel permeation chromatography, and CD spectroscopy. Introduction Molecular recognition as a tool to assemble small organic molecules into predictable motifs has already proven its potential in the preparation of nanometer-scale structures with interesting optical or electronic properties.1-3 This so-called bottom-up approach provides easy access to structures with 1-50 nm dimensions, a size regime that is perfectly compatible to that addressable via the classical top-down approach.4 The spontaneous generation of well-organized supramolecular structures starts with a proper design of the molecular components. We have previously shown that calix[4]arenes serve as excellent molecular platforms for the prepositioning of melamine and/or cyanuric acid units, which are able to self-assemble into finite and infinite hydrogen-bonded complexes, both in solution5 and on surfaces.6 Currently, we are exploring the limits of the self-assembly approach by further increasing the complexity of the assemblies. In this paper, we describe our latest achievement in this study, that is the completely reversible formation of the nanostructures 13‚(DEB)24, 13‚(BuCYA)24, and 13‚(RMePhCYA)24, comprising 8 different rosette layers that are held together by 144 cooperative hydrogen bonds. Regarding their size (∼3.0 × 5.5 nm) and molecular weight (∼20 kDa), these structures are comparable to small proteins, like cytochrome C (∼12 kDa) and myoglobin (∼16 kDa), or dendritic structures, like Zimmer†

Laboratory of Supramolecular Chemistry and Technology. Materials Science and Technology of Polymers. (1) Carter, F. L. Molecular Electronic Devices II; Marcel Dekker: New York, 1982. (2) Murray, R. W. In Chemical Sensors and Microinstrumentation; Melchior, D. C., Bassett, R. L., Eds.; ACS Symposium Series 403; American Chemical Society: Washington DC, 1989; pp 1-19. (3) Ajayan, P. M. Chem. Rev. 1999, 99, 1787-1799. (4) Xia, Y.; Rogers, J. A.; Paul, K. E.; Whitesides, G. M. Chem. Rev. 1999, 99, 1823-1848. (5) Timmerman, P.; Vreekamp, R. H.; Hulst, R.; Verboom, W.; Reinhoudt, D. N.; Rissanen, K.; Udachin, K. A.; Ripmeester, J. Chem. Eur. J. 1997, 3, 1823-1832. (6) Klok, H.-A.; Jolliffe, K. A.; Schauer, C. L.; Prins, L. J.; Spatz, J. P.; Moller, M.; Timmerman, P.; Reinhoudt, D. N. J. Am. Chem. Soc. 1999, 121, 7154-7155. ‡

man’s self-assembled dendrimers (2.0 × 9.0 nm, ∼36 kDa) (Figure 1).7 Results and Discussion Octamelamine 1 was prepared in one step from the mono-Boc-protected dimelamine carbamate 2a and tetramelamine diamine 3a. The reaction was performed by slow addition of 3a (1.0 mM solution in CH2Cl2) to a solution of 2a in CH2Cl2 in the presence of DIPEA (2.2 equiv) to give 1 in 31% yield after purification (Chart 1). The 27-component hydrogen-bonded assembly 13‚ (DEB)24 was prepared by simply mixing the octamelamine 1 with 8 equiv of 5,5-diethylbarbituric acid (DEB) in chloroform followed by sonication and heating at 50 °C overnight. Formation of the assembly is fully cooperative as judged from the fact that with only 4 equiv of DEB (half of the amount required for complete assembly formation) formation of intermediate assemblies was not observed at all. Addition of a slight excess (∼26.4 equiv) of N-butylcyanuric acid (BuCYA) or N-(1R-phenylethyl)cyanuric acid (R-MePhCYA) to this assembly resulted in the quantitative replacement of the DEB units for the corresponding cyanurates, giving the new assemblies 13‚ (BuCYA)24 and 13‚(R-MePhCYA)24 in quantitative yield. Characterization of the assemblies was performed using a combination of 1H NMR spectroscopy, MALDI-TOF MS using Ag+-labeling,8 gel permeation chromatography,9 and CD spectroscopy.10 The 1H NMR spectrum of 13‚(DEB)24 in CDCl3 clearly proves the successful formation of this octarosette assembly (Figure 2). The NHDEB protons give rise to eight (partially overlapping) singlets between 12 and 15 ppm. (7) Zimmerman, S. C.; Zeng, F.; Reichert, D. E. C.; Kolotuchin, S. V. Science 1996, 271, 1095-1098. (8) Timmerman, P.; Jolliffe, K. A.; Crego-Calama, M.; Weidmann, J.-L.; Prins, L. J.; Cardullo, F.; Snellink-Ruel, B. H. M.; Fokkens, R.; Nibbering, N. M. M.; Shinkai, S.; Reinhoudt, D. N. Chem. Eur. J. 2000, 6, 4104-4115. (9) Mammen, M.; Simanek, E. E.; Whitesides, G. M. J. Am. Chem. Soc. 1996, 118, 12614-12623. (10) Prins, L. J.; Huskens, J.; De Jong, F.; Timmerman, P.; Reinhoudt, D. N. Nature (London) 1999, 398, 498-502.

10.1021/jo0105742 CCC: $20.00 © 2001 American Chemical Society Published on Web 10/11/2001

8298

J. Org. Chem., Vol. 66, No. 25, 2001

Paraschiv et al.

Figure 1. Schematic representation for self-assembly of the 27-component octarosette 13‚(DEB)24 and 13‚(CYA)24.

The signals for the top and bottom “floors” (first and eighth floors) are significantly different from the other resonances and are observed at 14.19 (Ha) and at 13.3 (Hb). The NHDEB protons that are located at the inside of the assembly (second to seventh floors) are grouped around 13.8-13.6 (Ha, 9 H’s) and 13.0-12.8 (Hb, 9 H’s) ppm, characterizing the shielded environment of these protons. Additional proof for assembly formation comes from the four singlets between 8.6 and 8.2 (Hc) and the broad resonances around 7.7-7.4 ppm (Hd) for the other hydrogen-bonded NH protons. The ArHh protons are clearly discernible, giving two sharp resonances around 6.0 ppm. Finally, a broad signal around 5.0 ppm is observed for the urea and carbamate NH protons. For the corresponding tetrarosette assembly 3b3‚(DEB)12, the identity of all the proton signals was established using 2D NOE experiments.11 The 1:8 stoichiometry of 1 and DEB was confirmed by careful integration of the NHDEB and ArCH2Ar (4.5-4.2 ppm) proton signals. The 1H NMR spectrum for assembly 13‚(BuCYA)24 is severely broadened in comparison to that of 13‚(DEB)24, while the spectrum of assembly 13‚(R-MePhCYA)24 is almost uninterpretable between 15-12 ppm. This is due to different orientations of the side chains of either BuCYA or R-MePhCYA, either up or down, within the octarosette assembly, which causes desymmetrization of the assembly. For BuCYA, exchange between the many different orientations is slow on the NMR time scale at room temperature, but becomes much faster at higher temperatures, which results in sharpening of the spectrum. The NHCYA protons of assembly 13‚(BuCYA)24 are slightly shifted downfield to 14.65 (3 protons), 14.35 (9 protons), 14.12 (3 protons), 13.9 (9 protons) ppm. For this assembly the same 1:3:1:3 integral ratio of the various proton signals was observed, despite the much broader (11) Kerckhoffs, J. K. M. A.; Crego-Calama, M.; Luyten, I.; Timmerman, P.; Reinhoudt, D. N. Org. Lett. 2000, 2, 4121-4124.

nature of the signals. Similarly, the other NH and ArH protons signals are observed in or around the same region as for assembly 13‚(DEB)24. Characterization of assembly 13‚(EPB)24 (5-ethyl-phenyl barbituric acid) was also performed by MALDI-TOF mass spectrometry using a recently developed Ag+labeling technique.8 Therefore, the assembly was treated with 1.5 equiv of AgCF3COO in CHCl3 for 24 h prior to the measurement. The spectrum clearly confirms the presence of the rosette assemblies, showing a sharp and intense signal at m/z ) 19 681 (calcd for C1044H1344N234O150‚ 107Ag+ ) 19 679.2) (see Figure 3). Additional signals were observed at m/z ) 9851 ([13‚(EPB)24 + Ag + Na]2+, calcd 9851.0), and 13 560, which is most likely due to clustering of free 1 with Ag+. The shoulder (30% intensity) of the main peak at m/z ) 19 902 arises from additional complexation of AgCF3COO ([13‚(EPB)24 + 2Ag + CF3COO]+, calcd 19 900.1) to one of the remaining 23 binding sites for Ag+. Additional proof for assembly formation was obtained using gel permeation chromatography (GPC), using monodisperse polystyrene as a reference. Earlier work by Whitesides clearly showed that the thermodynamic stability of the assemblies determines the shape of the peak.9 The chromatogram of free 1 (not shown) indeed shows very broad peaks, most likely resulting from strong self-association of the monomer that leads to the formation of ill-defined polymeric structures. In contrast to this, the octarosette assembly 13‚(BuCYA)24 exhibits a sharp peak around 21 mL plus an additional peak for the liberated DEB (not shown). The peak for 13‚(BuCYA)24 is of comparable width and shape as that of the assemblies 2b3‚(BuCYA)6, 3b3‚(BuCYA)12, and 43‚(BuCYA)18 (Figure 4), thus confirming the monodisperse nature of the octarosette assembly. Moreover, dissociation of the assembly does not seem to occur on the GPC column. Finally, we studied the formation of octarosette assemblies by CD spectroscopy. Like for most double and

Nanostructures via Noncovalent Synthesis

J. Org. Chem., Vol. 66, No. 25, 2001 8299 Chart 1

tetrarosette assemblies studied sofar, both octarosette assemblies 13‚(DEB)24 and 13‚(BuCYA)24 also display chirality at the supramolecular level, resulting from the dissymmetrical orientation of the components within the assembly.6,12 When no chiral centers are present in the components, these assemblies are present as a racemic mixture of the M- and P-enantiomers. However, by using the chiral cyanurate R-MePhCYA, the corresponding assembly 13‚(R-MePhCYA)24 most likely forms exclusively the M-diastereomer, as was observed in very similar experiments with double rosette structures,10 resulting from a quantitive induction of the chirality by the 24 chiral centers in the periphery. As a consequence, the assembly is strongly CD-active while no significant CD activity was observed for the individual components, (12) Paraschiv, V.; Crego-Calama, M.; Luyten, I.; Timmerman, P.; Reinhoudt, D. N. Manuscript in preparation.

which allows us to use CD spectroscopy for characterization. The CD-spectrum for 13‚(R-MePhCYA)24 (Figure 5) clearly proves the rosette-like structure of the assembly, since the spectrum very much resembles that of double rosette assembly 2b3‚(R-MePhCYA)6. The intensity of the observed Cotton effect is somewhat lower than expected, i.e., roughly three times that of 2b3‚(R-MePhCYA)6, indicating that the observed Cotton effects are not entirely additive. To visualize the shape and structure of the octa rosette assembly, we performed computer simulation (Quanta/ CHARMm 24.0, Figure 6). The structure was manually put together starting from the minimized structure obtained from NOE distance constraints measurements as described for assembly 2b3‚(DEB)6.11 The size of the octarosettes reaches 5.5 nm, comparable in size to the DNA oligomers used for conductivity measurements.13

8300

J. Org. Chem., Vol. 66, No. 25, 2001

Figure 2.

1H

Paraschiv et al.

NMR spectra (300 MHz) of octarosette assemblies (a) 13‚(DEB)24 and (b) 13‚(BuCYA)24.

Figure 3. MALDI-TOF mass spectra of the monovalent Ag+-complex of octarosette assemblies 13‚(EPB)24.

Conclusion In summary, it can be stated that the quantitative selfassembly of 27 molecular components into one single nanostructure that is held together by a total of 144 hydrogen bonds adequately demonstrates the potential of molecular recognition as a tool to generate well-defined nanostructures via the bottom-up approach. More than this, we are able to control the dimensions of the assemblies in the range of 1-5 nm by a proper design of the calix[4]arene melamine component. Solid-phase synthesis could provide a means toward the synthesis of even higher generations of polymelamines. Our interest in these structures will mainly be directed toward their selfassembling behavior on flat surfaces, either via noncovalent interactions (rodlike structures)6 or via covalent attachment to a flat surface (gold monolayers or colloids). (13) Porath, D.; Bezryadin, A.; De Vries, S.; Dekker, C. Nature (London) 2000, 403, 635-637.

Experimental Section General Methods. All experiments were performed in an inert atmosphere. THF was distilled from Na/benzophenone ketyl and CH2Cl2 from K2CO3. All chemicals were reagent grade and used without further purification. 1H NMR spectra (300 MHz) were recorded in chloroform-d1 or toluene-d8. Samples for fast atom bombardment (FAB) mass spectrometry were loaded in a m-nitrobenzyl alcohol solution onto a stainless steel probe and bombarded with Xe atoms with a energy of 8 keV. Flash chromatography was performed on silica gel (SiO2, E. Merck 0.040-0.063 mm, 230-240 mesh). Preparative TLC was performed using SiO2 (1 mm). All commercially available reagents were used without further purification. The synthesis of dimelamine monocarbamate 2a,12 dimelamine diamine 2b,11 tetramelamine diamine 3a,12 and hexamelamine 412 have been or will be described elsewhere. Synthesis of Octamelamine 1. To a solution of mono-Bocprotected carbamate 2a (141 mg, 0.101 mmol) and DIPEA (19 µL, 0.11 mmol) in CH2Cl2 (10 mL) was slowly added a solution of tetramelamine diamine 3a (0.110 g, 50.8 µmol) in CH2Cl2

Nanostructures via Noncovalent Synthesis

J. Org. Chem., Vol. 66, No. 25, 2001 8301

Figure 4. Gel permeation chromatography (GPC) data for octarosette assembly 13‚(BuCYA)24 in comparison to the double rosette assembly 2b3‚(BuCYA)6. CHCl3 was used as an eluent.

Figure 6. Computer-simulated structure (CHARMm 24.0) of octarosette assembly 13‚(DEB)24.

Figure 5. Circular Dichroism (CD) spectra of double rosette assembly 2b3‚(R-MePhCYA)6 and 13‚(R-MePhCYA)24 in CHCl3 (1.0 mM each). (1 mL), and the reaction mixture was stirred for 2 h at rt. Then the reaction mixture was washed with H2O (5 mL) and brine (5 mL) and dried over Na2SO4. After removal of the solvent under reduced pressure, the residue was purified by flash column chromatography (SiO2, CH2Cl2/CH3OH-1% NH4OH, 90:10) giving pure 1 as an off-white solid in 31% yield (146 mg, 31 µmol). The 1H NMR spectrum of free 1 shows mainly broad resonances, characteristic for self-aggregation of polymelamines: MS (FAB) m/z ) 4665.4 (100, M+, calcd 4665.8). Anal. Calcd for C252H352N62O26‚3CH3OH: C, 64.32; H, 7.70; N, 18.24. Found: C, 64.40; H, 7.65; N, 17.87. Noncovalent Synthesis of Assemblies 13‚(DEB)24, 13‚ (BuCYA)24, and 13‚(R-MePhCYA)24. The 27-component octarosette assembly 13‚(DEB)24 was prepared by mixing the octamelamine 1 with ∼8 equiv of DEB in CHCl3, followed by sonication and heating at 50 °C to ensure that assembly formation is under thermodynamic control: 1H NMR δ 14.15 (s, 6H), 13.73, 13.71, 13.70 (3s, 18H), 13.30 (s, 6H), 12.96, 12.94, 12.90 (3s, 18H), 8.55, 8.50, 8.46 (3s, 18H), 8.28 (s, 6H), 7.7-7.4 (m, 24H), 7.05-6.2 (m, 144H), 5.97, 5.93 (2s, 24H), 5.2-5.0 (m, 48H), 4.5-4.2 (m, 48H), 4.0-3.6 (m, 96H), 3.63.4 (m, 48H), 3.2-2.2 (m, 60H), 2.2-1.4 (m, 228H), 1.4-0.6 (m, 486H): MALDI-TOF MS (after Ag+-labeling) m/z ) 19 681 (100, [M+Ag]+, calcd for C1044H1344N234O150‚107Ag+ ) 19 679.2). Octarosette assemblies 13‚(BuCYA)24 were prepared by addition of a slight excess (∼26.4 equiv) of N-butylcyanuric acid (BuCYA) or N-(1R-phenylethyl)cyanuric acid (R-MePhCYA) to assembly 13‚(DEB)24, resulting in quantitative exchange of DEB with either BuCYA or chiral R-MePhCYA. The quantitative exchange of DEB for CYA was confirmed by 1H NMR measurements (see Figure 2b), showing that the original

signals for the assembly with DEB have completely disappeared. MALDI-TOF Mass Spectrometry14 Measurements. For instrumentation and experimental conditions, see ref 7. Samples were prepared by mixing 10 µL of a 1 mM chloroform solution of the sample with 30 µL of a 0.01 mg/L solution of the matrix () hydroxybenzylidene malononitrile) in chloroform/liquid poly(ethylene glycol) film. One microliter of this solution was loaded onto a gold-sample plate, coated with the prepared film, and transferred into the vacuum of the mass spectrometer for analysis. GPC Measurements. GPC measurements were carried out at ambient temperature using a modular system comprising a Waters 510 pump, a HP1051-Ti autosampler, and a Waters 411 differential refractometer. All separations were obtained using three Waters columns(HR4 + HR2 + HR0) and one additional 500 Å guard column in series. As a solvent we used stabilized chloroform at a flow rate of 1.5 mL/min. The sample loading was 60 µL of a 0.05% w/v solution. Molecular Mechanics Calculations. Initial structures as well as visualizations were generated using Quanta 97.15 All gasphase simulations were performed with CHARMm version 24.016-18 as implemented in Quanta 97. Parameters were taken from Quanta 97 and point charges were assigned with the charge-template option. Residual charge was smoothed on carbon and nonpolar hydrogen atoms rendering overall neutral residues. A distance-dependent dielectric constant was applied with  ) 1. No cutoffs on the nonbonded interactions were used. Energy minimizations were performed with the Steepest Descent and Adopted Basis Newton-Raphson methods until the root-mean-square of the energy gradient was