Near-Infrared-Light-Responsive Magnetic DNA Microgels for Photon

Aug 2, 2017 - TEM images indicated a magnetic polymer shell has an analogous “doughnut” shape which loosely surround the AuNRs core. When irradiat...
1 downloads 0 Views 707KB Size
Subscriber access provided by Queen Mary, University of London

Article

Near-Infrared-Light-Responsive Magnetic DNA Microgels for Photon- and Magneto-Manipulated Cancer Therapy Yitong Wang, Ling Wang, Miaomiao Yan, Shuli Dong, and Jingcheng Hao ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.7b05502 • Publication Date (Web): 02 Aug 2017 Downloaded from http://pubs.acs.org on August 3, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Near-Infrared-Light-Responsive Magnetic DNA Microgels for Photon- and Magneto-Manipulated Cancer Therapy Yitong Wang,a Ling Wang,a Miaomiao Yan,b Shuli Donga and Jingcheng Hao*a a

Key Laboratory of Colloid and Interface Chemistry & Key Laboratory of Special Aggregated Materials, Shandong University, Ministry of Education, Jinan 250100, P. R. China.

b

Department of Pharmacy, Binzhou Medical College, Yantai 264003, P. R. China

* Corresponding author. Tel: +86-531-88366074. E-mail: [email protected] 1

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ABSTRACT: Functional DNA molecules have been introduced into polymer-based nanocarrier systems to incorporate chemotherapy drugs for the cancer therapy. Here is the first report the dual-responsive microgels composed of core of Au-nanorods and shell of magnetic ionic liquid and DNA moieties in the crosslinking network simultaneously as effective drug delivery vectors. TEM images indicated a magnetic polymer shell has an analogous “doughnut” shape which is loosely surrounded around the AuNRs core. When irradiated with a near-infrared-light (NIR) laser, Au-nanorods are the motors which convert the light to the heat, leading to the release of the encapsulated payloads with high controllability. DNA act not only as a crossing-linker agent, but also a gatekeeper to regulate the release of drugs. The internalization study and MTT assay confirm that these core-shell DNA microgels are excellent candidates which can enhance the cytotoxicity of cancer cells controlling by NIR laser and shield the high toxicity of chemotherapeutic agents to improve the killing efficacy of chemotherapeutic agents efficiently in due course.

Keywords: magnetic DNA microgel, drug release, near-infrared-light responsibility, cancer therapy, Au-nanorod

2

ACS Paragon Plus Environment

Page 2 of 36

Page 3 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Introduction Current cancer treatments heavily rely on chemotherapeutic measures. However, when putting into the clinical practices, traditional chemotherapeutic drugs are circumscribed by their poor solubility in aqueous media, instability during the blood circulation as well as potential cytotoxicity, which could kill “normal” cells and cause toxicity to the patient.1 In order to meet the complicated requirements originating from the clinical practices, massive effort has been made to develop an intelligent drug carrier for efficiently deliver anticancer drugs. An ideal drug carrier should primarily be able to facilely encapsulate a mass of anticarcinogen with high efficiency and deliver to the tumor sites in security without premature drug release during the entire voyage. In addition, the controlled release of chemotherapeutic cargos in a controlled way can be achieved by flexible design of drug carriers, upon suffering the specific stimuli.2,3 Traditionally, because of the micro-environments associated with a pathological situation, the stimuli which include pH,4 temperature,5 redox reactions,6 and the existence of some specific enzyme7 may particularly differ from their healthy surroundings.8 However, it remains major challenge in functionality and efficiency of drug

carriers

when

micro-environment

changes

little,

especially

for

the

sub-nanomolar concentrations of biochemical signals or biomarkers. Fortunately, the remote controlling stimuli, e.g. ultrasound, magnetic field or light, which possess the facile accessibility and externally manipulative controllability, even without side-effects could addressed these drawbacks easily, making them appeal in artificial cartilage tissue and clinical diagnostics, as well as in biomedical fields.9-11 3

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Microgels which possess the intersexuality of hydrogels and nanomaterials12 are polymeric colloidal particles with three-dimensional cross-linked network structures. Microgels are similar to hydrogels, possessing high loading capacity, flexible physicochemical properties, biostability and excellent biocompatibility.13 Compared to hydrogels, microgels are more sensitive to response to external stimuli, and have higher load capacity and more drug release.14-16 Furthermore, the nanoscale microgels establish the functionalized applications in biological field such as a high specific surface area for bioconjugation, extended circulation times in blood, and tunable size for realizing active or passive targeted to the tumour sites.17 The sum of these properties, coupled with the presence of an interior network for the incorporation of payloads, make microgels ideal candidates for drug carriers. Integrating different functional materials into one carrier in which every component can acts in a synergetic way offer even great possibilities for clinical practice.18-21 Therefore, recently, multifarious hybrid microgels with multifunctionality and versatile characters have been attracted attention of many research fields ranging from materials science to biomedicine.22,23 Magnetic microgels can not only fast response to external magnetic fields, but also easy to separate and recycle from the mixtures. Moreover, these magnetic nano-composites make it possible to magnetic resonance imaging guided endovascular intervention or therapy. Wang et al.24 constructed core-shell magnetic microgels by free-radical mild polymerization initiated by the cascade reaction of glucose oxidase and horseradish peroxidase, which can be used to the colorimetric 4

ACS Paragon Plus Environment

Page 4 of 36

Page 5 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

detection of glucose. Hennink et al.25 prepared temperature-sensitive liposomes loaded alginate microgels. These microgels can release their payload through mild hyperthermia. It can be further achieved magnetic resonance imaging by depositing holmium ion into these microgels. Most magnetic microgels were prepared by introducing the magnetic nanoparticles. However, the external environment has greatly influence on the stability of nanoparticles because they are well dispersed in the solvent by adding surfactants. Furthermore, in order to prepare magnetic nanoparticles with uniform sizes and regular morphologies, pyroreaction is usually required. In this regard, novel designs are needed to explore in depth for further development of magnetic microgels. Polymeric ionic liquids (PILs) can be synthesized by ionic liquids used as monomers, which are described as novel materials possessing concurrent character of ionic liquid and polymers.26-28 The most notable feature of PILs is that the nature of the counteranion has strong influence on their chemical and physical properties. It is particularly significant under the circumstance of cationic PILs with different counteranions. The investigation on ionic liquids with magnetic counterions was pioneered by Eastoe et al.29,30 This kind of ionic liquids can simply be synthesized by coordinating conventional ionic liquids having halide ions with FeCl3 in methanol. Intriguingly, these magnetic ionic liquids are molecular liquids rather than typical magnetic fluids which are composed of magnetic colloidal particles dispersed in liquid. The nanoparticle-free magnetic ionic liquids are themselves paramagnetic, non-volatile, good stability and tunable physicochemical properties regulated by 5

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

external magnetic fields. Several literatures have reported that ionic liquids can form microgels as monomers.31,32 Magnetic microgels can be prepared by introducing the magnetic ionic liquids, which realizes the construction of magnetic microgels without nanoparticles. Among the responsive microgels reported in the literature, seldom has anyone succeeded in directly introducing magnetic ionic liquid moieties into the crosslinking network of microgels. Herein, for the first time, we engineer and synthesize a novel dual-responsive core (Au-nanorods)-shell (magnetic ionic liquid and DNA moieties in the crosslinking network simultaneously) microgels as effective drug delivery vectors through an interesting approach. As illustrated in Figure 1, a near-infrared light-responsive drug delivery platform based on gold nanorods (AuNRs) coated with DNA cross-linked magnetic microgel shells is constructed. We design and prepare smart DNA-polymer microgels for regulating the magnetic targeting drug delivery and controllable release of anticancer drugs. This nanocomposite is built from a photothermal AuNRs core, oligonucleotides crosslinks, and polymer shells. DNA serves as a valve in smart response to the external stimulus.33-37 Integrating AuNRs with photothermal effects and duplex DNA with the unique temperature-dependent assembly property, NIR light-activated supersensitive drug release system is expected. We previously developed cuboid DNA microgels drug delivery systems with DNA as cross-linking agents which showed excellent biocompatibility and highly selective therapy efficacy for tumour sites.38 In present work, DNA serves as not only cross-linking agents for improving the biocompatibility, but also takes the role as a valve to control the drugs release. The 6

ACS Paragon Plus Environment

Page 6 of 36

Page 7 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

double-stranded oligonucleotide cross-linked magnetic microgel layers are used to realize magnetic targeting drug delivery by introducing the magnetic ionic liquids as the monomers. AuNRs have attracted considerable scientific interest in the field of biomedical applications and especially suited for thermo-chemotherapeutic agents due to their tunable absorption maxima in the NIR region and photothermal property.39 When irradiated by a NIR laser beam, AuNRs in the magnetic microgels are the motors causing a rapid rise in the temperature. Once the heat dissipates into the surroundings, the rising temperature causes the DNA crosslinks separate. As a result, the microgel shells break down and the payloads release. We also demonstrate that such light-responsive magnetic microgels can be candidates for remotely controlled drug delivery platform with excellent biocompatibility and highly therapeutic effect for cancer cells.

Experimental section Chemicals. The acrydite-DNA and linker DNA were purchased from Shanghai Sangon Company (Shanghai, China) and HPLC purified. Hydrogen tetrachloroaurate (Ⅲ) hydrate, 1-vinylimidazole, 1-bromobutane were purchased from J&K Chemical Company (Beijing, China). Hexadecyltrimethylammonium bromide (CTAB), sodium oleate (NaOL), ascorbic acid (AA), AgNO3, NaOH, NaCl and MgCl2 were purchased from Sinopharm Chemical Reagent Co. Ltd. (Shanghai, China). Tetraethyl orthosilicate and 3-(methacryloxy)propyltriethoxysilane (MPS) were purchased from Aladdin Chemical Reagent Co. Ltd (Shanghai, China). Doxorubicin hydrochloride (Dox), 2-hydroxy-4’-(2-hydroxyethoxy)-2-methyl-propiophe (I2959), trihydroxy7

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

methyl aminomethane (Tris) and sodium borohydride (NaBH4) were purchased from Sigma-Aldrich. All buffers were prepared with ultrapure water with a resistivity of 18.25 MΩ·cm obtained by a UPH-IV ultrapure water purifier (China). All glassware was cleaned using freshly prepared aqua regia followed by washing with plenty of water. Human hepatoma cell line (HepG2 cells) were gifted from the Experimental Center of Binzhou Medical College. Preparation of mesoporous silica coated gold nanorods (Au@SiO2). Gold nanorods (AuNRs) were synthesized according to the report with minor modifications.40 For preparing the seed solution, 5 mL of 0.5 mM HAuCl4 was mixed with 5 mL of 0.2 M CTAB solution in a 50 mL conical flask. Then 0.6 mL of fresh prepared 0.01 M NaBH4 ice solution was injected into the HAuCl4-CTAB solution in the case of vigorous stirring at 1200 rpm. Then the solution color changed from saffron yellow to brownish yellow and the stirring was sustained for 2 min. The seed solution was aged at 25 °C for 2 h. For preparing the growth solution, 7.0 g CTAB and 1.234 g NaOL were dissolved in 250 mL of warm water (~50 °C), then solution was cooled down to 30 °C naturally and 18mL of 4 mM AgNO3 solution was added. After mixture was kept undisturbed at 30 °C for 15 min, 250 mL of 1 mM HAuCl4 solution was added. With stirring (700 rpm) for 90 min, the solution became colorless and 1.5 mL HCl (37 wt% in water, 12.1 M) was then introduced to adjust the pH. After stirring another 15 min at 400 rpm, 1.25 mL of 0.064 M AA was injected and the solution was vigorously stirred (1200 rpm) for 30 s. Finally, 400 µL seed solution was added into the growth solution. The resultant mixture was vigorously stirred (1200 rpm) for 30 s and kept undisturbed at 30°C for 12 h for nanorod growth. The final solutions were centrifuged at 7,000 rpm for 20 min and re-dispersed into the same amount of water. The AuNR solutions 8

ACS Paragon Plus Environment

Page 8 of 36

Page 9 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

were stored at 4 °C for further use. Silica coating AuNR was implemented using a Stöber method with modifications.41 After initial synthesis and purification, 10 mL AuNRs samples were centrifuged for a second time at 10000 rpm for 20 min and redispersed by 10 mL of 0.4 mM CTAB. The mixture solutions were stirred overnight at 300 rpm to allow the CTAB to equilibrate on the surface of the AuNRs. Then, 50 μL of 0.1 M NaOH was added to adjust pH to be 10.6. After the solutions were stirred at 400 rpm for 30 min, 22 μL 20 % TEOS in methanol was added under gentle stirring at 30 minute in intervals, this methanol solution was injected three times. The mixture was reacted for 24 h at 26~28 °C, then purified by centrifugation and washed with methanol and water. Synthesis

of

the

magnetic

ionic

liquids.

The

magnetic

ionic

liquids,

3-n-butyl-1-vinylimidazolium trichloromonobromoferrate ([VBIM]FeCl3Br) were synthesized according to reported procedure.29,42 16.44 g Bromobutane and 9.4 g 1-vinylimidazole were added into a 150 mL acetonitrile solution. The reaction mixture was stirred at 70 °C for 48 h under the protection of nitrogen, and then cooled to room temperature. Then 3-n-butyl-1-vinylimidazolium bromide ([VBIM]Br) was obtained by vacuum rotary evaporation, washed three times with ethyl acetate and dried at 40 °C for 12 h under vacuum. 1H NMR (300 MHz, D6-DMSO); d 9.70 (s, 1H), 8.28 (s, 1H), 8.01 (s, 1H), 7.35 (m, 1H), 6.02 (m, 1H), 5.43 (m, 1H), 4.24 (t, 2H), 1.83 (m, 2H), 1.28 (m, 2H), 0.92 (t, 3H). Equivalent of iron trichloroferrate was added to the [VBIM]Br and stirred overnight at room temperature, then dehydrating at reduced pressure at 80 °C overnight to yield a viscous brown liquid. Due to the magneto-active metal complex anions [FeCl3Br]-,29 a series of characteristic absorption peak can be obtained, as shown in Figure S2c, demonstrating the successful synthesis of magnetic ionic liquid monomers. 9

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Preparation of the magnetic core-shell DNA microgels. Magnetic core-shell DNA microgels were prepared according to our previous work with some modifications.38 Firstly, 1.3 μL MPS was dissolved in 100 μL methanol and then added into 10 mL re-prepared Au@SiO2 sample, and the mixture was stirred for 5 h. In order to remove the unreacted MPS, the obtained Au@SiO2@MPS samples were centrifuged and re-dispersed by 1 mL water. Solution DNA A: 50 µL MPS-modified Au@SiO2 sample, 21 µL of 142 µM strand A, 14 µL of 5 mM magnetic ionic liquid solution, 7 µL of 1 wt% I2959 solution and 70 µL of buffer (100 mM Tris-HCl, 500 mM NaCl, 100 mM MgCl2, pH = 8.0) were added to 245 µL of water. The mixture stirred at 300 rpm and irradiated by UV light (365 nm, portable UV lamp, ZF-7A) for 5 min. Solution DNA B: 13 µL of 128 µM strand B, 1 µL of 1 mM magnetic ionic liquid solution, 1 µL of 1% wt I2959 solution and 5 µL of buffer were added into 30 µL of water. The mixture was stirred at 300 rpm and irradiated by UV light (365 nm, portable UV lamp, ZF-7A) for 5 min. Finally, 500 µL DNA A solution and 50 µL DNA B solution were mixed with 40 µL of 3.3 µM linker DNA and incubated in a water bath at 65 °C for 5 min, followed by controlled cooling to the room temperature. The prepared microgels were collected by centrifugation and washed with water. Characterizations. UV spectra of magnetic ionic liquids, AuNRs, Au@SiO2 and DNA microgels solutions were examined by a U-4100 UV-visible spectrometer, using a quartz cell at a wavelength range of 400-1000 nm. When the samples were measured for UV-visible spectra, proper background subtraction was conducted for the samples by water as references. The morphologies of samples were studied on a JEOL JEM-1400 TEM (acceleration voltage, 120 kV) with a Gatanmultiscan CCD for collecting images. About 10 μL of microgel sample was dropped on carbon membrane support copper 10

ACS Paragon Plus Environment

Page 10 of 36

Page 11 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

grids and dried naturally. Zeta potential was measured with a Zeta PALS potential analyzer instrument (Brookhaven, USA) with 5 mm apart spaced between parallel-plate platinum black electrodes and a rectangular organic glass cell with 10 mm path length. The sinusoidal voltage is 80 V and the frequency is 3 Hz. SQUID magnetometry. Dried samples of the DNA microgels were placed in sealed polypropylene tubes and mounted inside a plastic straw for measuring in a magnetometer with a superconducting quantum interference device (MPMSXL, Quantum Design, USA) and a reciprocating sample option (RSO). The data were collected at 300K. Drug loading and in vitro release. Dox solution (1 mL, 40 µg/mL) in PBS buffer was mixed with dry DNA microgels for 12 h for loading the Dox into the magnetic microgels. After being centrifuged (8000 rpm, 15 min) and washed with water to remove unencapsulated Dox. The drug loading content was calculated from the concentration of Dox in the supernatant which detected by a UV-vis absorption peak at 480 nm. The release profile of Dox was constructed in different buffers (pH = 5.0 and 7.4) whether irradiated by NIR laser (808 nm, 2 W/cm2) or not. The supernatant was collected by centrifuging at different time intervals, and the same volume of fresh buffers was put back to the mixture. The concentration of Dox released from the nanocomposite was measured by UV-Vis spectrophotometry based on the standard curve of Dox at 480 nm. Cell culture. HepG2 cells were cultured in Dulbecco’s modified Eagle’s medium (DMEM, Fanbo) supplemented with 10% fetal bovine serum (FBS, Fanbo). Cells were maintained in a 5% CO2 atmosphere at 37 °C. 11

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Cell uptake. Dox has unique optical property with a wide absorption spectroscopy around 480 nm as excitation energy and a strong fluorescence emission around 580 nm. Therefore, cellular uptake of Dox can monitor by using laser confocal microscope (Leica TCS SPE, Germany) through fluorescence of Dox. Before measurements, cells were incubated with 10 μg/mL Dox-loaded DNA microgels for 4 h, then, the supernate was abandoned and 1mL of fresh medium was added. The cells were irradiated with or without NIR laser respectively. The fluorescence signal of Dox was detected by using laser confocal microscope (Leica TCS SPE, Germany). Cytotoxicity. MTT assay was used to analyze the cell viability of DNA microgels. Firstly, 2000 HepG2 cells were seeded in 96 well microplates and grew in DMEM medium containing 10% fetal bovine serum (FBS) at 37 °C for 24 h. After incubating the cells with various concentrations of magnetic DNA microgels, Dox-loaded magnetic DNA microgels or Dox alone for at 37 °C 4 h, irradiating with or without NIR laser (808 nm, 2 W/cm2), the cells were maintained for another 20 h. To measure cytotoxicity, a MTT solution was incubated with cell suspensions for 4 h, and then the medium was carefully removed. By measuring the absorbance of each well at 570 nm using a multi-detection microplate reader (Synergy TMHT, BioTek Instruments Inc, USA), cell viability was calculated as the ratio of absorbance of experimental well and the cell in control well. The significant level was set as P < 0.05.

Results and discussion Fabrication and characterization of magnetic core-shell DNA microgels. AuNRs with the tunable longitudinal surface plasmon resonance (LSPR) in NIR range are of great interest to be potential for various light-trigged bioimaging and cancer therapy.

12

ACS Paragon Plus Environment

Page 12 of 36

Page 13 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

However, their inherent structures and properties, e.g. nonporous structure, low load capacity and restricted elasticity, prevent them to act as drug carriers. In order to overcome these drawbacks, the surface of AuNRs based nano-systems is often modified with cell-specific groups, silica shells or polyelectrolyte for effective drug delivery.39 In this work, a seed-growth binary surfactant-directed approach was used for preparing monodisperse AuNRs with aspect ratio of approximately 3.7.40 Transmission electron microscopy (TEM) images and UV-vis spectra (Figure 2a and Figure S1 in the Supporting Information (SI)) indicate AuNRs having diameters 25 nm and LSPR wavelength is located at 790 nm. To prevent the aggregation of AuNRs during the polymerization process, AuNRs were first coated with a silica shell by hydrolysis of TEOS in methanol/water mixtures. During the process of silica-coating, a CTAB bilayer formed around the AuNRs serves as a template for the silica layer formation. Murphy et al.43 demonstrated that the most critical factor to formation of silica layer onto AuNRs is the amount of free CTAB in solution. The silica shell thickness decreases with the increasing of CTAB concentration. When the concentration is higher than the critical micelle concentration (CMC) of CTAB, no silica is formed on the AuNRs surface. AuNRs are centrifuged for a second time after synthesis and added suitable amount of CTAB into the AuNR solution with sufficient mixing to ensure the CTAB adequately equilibrated on the surface. Amount of AuNR, pH, amount of TEOS, reaction temperature and time are all strictly controlled. The thickness of the silica shell determined by TEM is ∼40 nm (Figure 2b). The mesoporous structure of the silica shell permits exposure of the AuNR cores to the 13

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 36

surroundings, enabling a sensitive response of the longitudinal SPR to refractive index changes caused by modified molecules:44,45 a small red-shift of the surface plasmon band (Figure 2f).

 

  Figure 1. (a) Schematic illustration of magnetic core-shell DNA microgels. (b) Component and DNA sequences in the microgel shells. (c) Synthesizing process of [VBIM]FeCl3Br.

14

ACS Paragon Plus Environment

Page 15 of 36

f

Au nanorods Au@SiO2 Au@SiO2 @Microgel

Absorbance (a.u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

500

600

700

800

900

1000

Wavelength (nm)

Figure 2. TEM images of (a) AuNRs, (b) Au@SiO2, (c, d and e) magnetic core-shell DNA microgels. (f) Extinction spectra of AuNRs, Au@SiO2 and magnetic core-shell DNA microgels. To integrate photothermal effects and magnetic properties in one drug nanoplatform, a magnetic microgel layer consisting mainly of polymeric ionic liquid was coated onto the surface of silica-coated gold nanorods (Au@SiO2). Magnetic ionic liquids, 3-n-butyl-1-vinylimidazolium trichloromonobromoferrate ([VBIM]FeCl3Br), contain magneto-active metal complex anions which can response to the external magnetic field. [VBIM]FeCl3Br can simply be produced by coordinating [VBIM]Br with FeCl3 in anhydrous methanol at room temperature. Magnetic [VBIM]FeCl3Br molecules are the main components of the microgel backbone, endowing magnetic units to resulting core-shell DNA microgels. The synthesis of [VBIM]FeCl3Br is demonstrated by a variety of techniques (Figure S2 in the SI). The silicane-coupling agent MPS is used to endow the surface of silica shell with abundant C=C bonds which is the key to coat the polymer shell. The growth of linear polymeric chains was initiated by the MPS groups on the particle surface through photo-initiated free radical polymerization with the [VBIM]FeCl3Br monomer and acrydite-modified DNA. As a result, single stranded A was grafted onto the linear polymers (PS-A), which are connected with the surface of the Au\NRs. PS-A not only serves as a building block of the microgel shells, 15

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 36

but also as a near-infrared responsive unit for the photothermal conversion. Another acrydite-modified single strand DNA B has also been grafted onto linear polymer chain (PS-B). As shown in Figure 1b, the sequences of DNA strand A and B are complementary to the cross-linking oligonucleotide (linker DNA). The linker DNA can hybridize to both DNA strand A and B when mixing the PS-A, the PS-B solutions with the linker DNA in a stoichiometric ratio, consequently, the near-infrared light-responsive magnetic DNA microgels can be constructed. Representative TEM images of the Au@SiO2@microgels show that the dark gold nanorod core is respectively coated with a uniform grayish polymer shell. Moreover, the relatively uniform size of the core-shell magnetic DNA microgels is about 300 nm in the dry state (Figure 2c-2e), which meets the requirement of entering into the cancer cells. The magnetic polymer shell has an analogous “doughnut” shape which is loosely surrounded around the AuNRs core. The component change of the as-made DNA microgels was determined by Fourier transform infrared spectra (FTIR, Figure S3 in the SI). In the spectrum of Au@SiO2, the wide absorption peak at 3433 cm-1 is attributed to silanol and adsorbed water. When modified with the coupling agent MPS, this band becomes weak. In the meanwhile, the absorption peak at 1713 cm-1 is associated with stretching vibration of carbonyl group C=O of ester group, demonstrating the successful bound on the surfaces of SiO2 by coupling agent MPS.46-47 After growth of polymer shells, the new absorption peaks at 3600-3100, 1647 and 1157 cm-1 assigned to the stretching vibration of N-H (PNIPAM), the bending vibration of amide carbonyl (PNIPAM)47 and imidazole C-N stretching 16

ACS Paragon Plus Environment

48

,

Page 17 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

appeared respectively. These results demonstrated that the polymer shells were successfully grafted onto the silica surfaces. Dynamic laser scattering measurement showed that the hydrodynamic radius of microgels is larger than the average diameter calculated from TEM images (Figure S4 in the SI). Compared with the blood vessel in normal tissues, blood vessel in tumour is particularly disordered and twisted. It is worth mentioning that the vascular endothelium in tumours has more open channels than normal vessels, ranging from 200 nm to 1.2 µm.49,50 As shown in Figure S5 in the SI, after illuminating by a NIR laser for 5 min, significantly more DNA microgels passed through the filter with pore diameter of 450 nm than those at 25 and 37 °C, indicating the DNA microgels have potential to pass through the vascular endothelium for cancer therapy. Different tumor type has different sizes of tumor leaky vessels ranging from 200 nm to 1.2 µm. The size decrease of drug carriers at higher temperature is more beneficial to extravasate to tumor tissue. Moreover, Figure 2f shows that the LSPR wavelength remains in NIR region after polymer coating, which guaranteed the NIR laser can penetrate into biological tissues deeply. The core-shell DNA microgels can be stably dispersed in a buffer solution of pH 7.4 (Figures S6 and S7 in the SI), while the microgel shells disappear when dispersed in the buffer solution of pH 5.0. As shown in Figure S8 in the SI, no“doughnut” part coated on the surface of Au@SiO2. It indicates the unstability of DNA in the acidic environment results in cross-linked structure of microgel shells break down which could meaningfully promote the payloads release from the microgels. Photothermal conversion and magnetic property of magnetic core-shell DNA 17

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

microgels. When the AuNRs are illuminated by a NIR laser with a wavelength that matches with longitudinal surface plasmon resonance peak of the AuNRs, they can convert photoenergy to be photothermol heat efficiently. When the heat dissipated into the surroundings, the temperature would rise and result in the duplex DNA to unwinding. The microgel shells are spontaneously dissolved, resulting in rapid release of the cargos from microgels into the aqueous solution. Therefore, the efficiency of photothermal conversion is a necessary character to evaluate. Temperature-time trends of DNA microgels at different concentrations are shown in Figure 3a. Once the NIR laser at 808 nm begins to irradiate, a rapid increase in temperature can be observed in the beginning, after 10 min, the curves reach a plateau. The rising rate of temperature and the plateau temperature are relevant to the DNA microgel amount. The higher photo-thermal conversion efficiency of core-shell DNA microgels can make the photothermal heating of the solutions rapidly, which can be applied to control the release of the chemotherapy agents to induce cell apoptosis upon exposure to NIR laser beam. 4.25 mg/mL 0.53 mg/mL 0.09 mg/mL

0.2

1.06 mg/mL 0.27 mg/mL Water

Magnetic Moment (emu/g)

a

70

Temperature (C)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 36

60 50 40 30 0

2

4

6

Time (min)

8

10

b

0.1

0.0

-0.1

-0.2 -60000

-30000

0

30000

60000

Magnetic Field (Oe)

Figure 3. (a) NIR-induced heat generation of core-shell DNA microgels aqueous solution with different concentrations at power density of 2 W/cm2. (b) SQUID 18

ACS Paragon Plus Environment

Page 19 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

magnetometry result of core-shell DNA microgels at 300 K. To date, magnetic nanomaterials using dispersions of magnetic nanoparticles have been used with some success in application of controlled drug delivery.51 However, to the best of our knowledge, drug delivery nanoplatforms based on magnetic ionic liquids have been rarely reported. SQUID magnetometry measurement well reveals that the core-shell DNA microgels are paramagnetic (Figure 3b), which can be intuitively observed in Figure S9 in the SI, where the magnetic core-shell DNA microgels are transported towards and tightly adhered on the surface of the NdFeB magnet rapidly within a few seconds by an applied magnetic field (1 T). The whole migration process was recorded in a video in supporting information (Video S1† in the SI). The migration process induced by magnet was evaluated by UV-vis spectra due to intense adsorption bands of AuNRs in the NIR range. After applying an external magnetic field, the absorbance intensity of DNA microgels longitudinal SPR peak decreased evidently over four days, which demonstrated the number of DNA microgels in the upper solution were decreased (The transported DNA microgels were calculated to be approximately 47.4%), indicating the DNA microgels were transported to the magnet (Figure S10 in the SI). Furthermore, as shown in Figure S11 in the SI, the core-shell DNA microgels exhibit ferromagnetic to some extent. We previously

demonstrated

that

the

combination

of

DNA

and

cationic

magneto-surfactant micelles resulted in the formation of ferromagnetic aggregates with a typical “hysteresis loop”.52 According to classical models describing colloid particles,53,54 for the magnetic ionic liquids alone, counterions exist in both Stern and 19

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

diffuse layers. In the Stern layer, counterions strongly bind and move as a whole dynamic entity. While in the diffuse layers, counterions move freely and keep dynamic equilibrium with those in the Stern layer. When the magnetic ionic liquid monomer is incorporated into polymer network, the counterions are enriched around the microgel. Counterions [FeCl3Br]- are hydrophobic and present strong hydrophobic interaction with the alkyl chains of magnetic ionic liquid existing in the polymer network, intensifying the combination between counterions [FeCl3Br]- and polymers. The core-shell DNA microgels take on ferromagnetism to some extent. This ferromagnetism demonstrates that the potential for controlled orientation of core-shell DNA microgels. It can be useful in transporting drugs to fixed cells or tissues and assist to improve the delivery efficiency in clinical therapy. Drug loading and laser-controlled release. Doxorubicin hydrochloride (Dox), a well-known chemotherapy drug, is employed as a model drug to evaluate the core-shell DNA microgels as a drug delivery system. Dox is loaded into the core-shell DNA microgels through electrostatic interaction to form a complex (abb. as Mgel-Dox). Dox can be easily incorporated into DNA microgels through stirring the DNA microgels solution with Dox solution overnight and removing the unencapsulated Dox by centrifuging and washing for several times. It should be note that the Dox loading content reached up to 26.4% and Dox entrapment efficiency is 93.8%. Because of the lower cytotoxicity even at high concentrations and easier enter into cells, DNA-based drug nanoplatforms have been extensively studied.55 However, the microgels which used the thermosensitive duplex DNA as drug gatekeepers are scarcely reported. In this work, the duplex DNA undergoes thermal transformation to 20

ACS Paragon Plus Environment

Page 20 of 36

Page 21 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

unwinding into single stranded DNA at elevated temperatures caused by AuNRs, so that the loaded drugs are released rapidly and completely, which can improve the therapeutic effect of chemtherapy drug efficiently. The release profiles of the captured Dox from Mgel-Dox whether irradiated by NIR laser or not at different pHs are determined by monitoring the increasing absorbance signals at 480 nm of the supernatants at known time intervals. As shown in Figure 4a, only a small amount leaking of Dox molecules from the Mgel-Dox occurred during the whole process of testing at pH 7.4 without laser, indicating the core-shell DNA microgels can avoid premature drug release during the entire voyage. The significantly enhanced drug release rate and percentage can be realized by irradiating a laser at 808 nm. It is because that the hyperthermal Mgel-Dox suspension dehybridized the duplex DNA and dissociated electrostatic interactions between Dox and the polymer shell. Due to the weak acidic microenvironment of cancer cells, release profiles of the loaded Dox from Mgel-Dox at pH 5.0 are carried. The unstable DNA sequences in the acidic microenvironment promote Dox releasing from the DNA microgels. Therefore, drug release rate and percentage are higher than those at pH 7.4, and the final drug release percentages are up to 84.2%. A characteristic advantage of our system is the controllable property, which enables to achieve the more complicated on-demand cargo delivery. As a proof in Figure 4b, the release of Dox molecules is adjusted with applying a NIR laser. At first, less than 20% Dox releases from Mgel-Dox, when the suspension of Mgel-Dox is illuminated with a NIR laser beam(808 nm, 2 W/cm2), a more distinct release of Dox molecules occurs, which should be contributed to the rapid disassembly of the DNA cross-linked polymer shell coating on the AuNR core. To the best of our knowledge, payloads triggered by a NIR light release from an AuNRs-based DNA cross-linked microgels is scarcely explored. When the Mgel-Dox 21

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

irradiated by a NIR light, the local temperature rising induced by AuNRs through photothermal effects makes the linker DNA thermal dissociate from their complementary sequences grafted onto the polymer strand chains (PS-A and PS-B). This leads to a rapid dissociation of the microgel layer. 100

a

100

no laser, pH 7.4 no laser, pH 5.0 808 nm laser, pH 5.0 808 nm laser, pH 7.4

80 60 40 20 0

60 40 20 0

0

50

100

150

b

80

Dox Release (%)

Dox Release (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 36

200

250

300

350

400

Irradiated by a 808 nm laser

0

Time (min)

50

100

150

200

250

Irradiation Time (min)

Figure 4. (a) Dox release profiles from Mgel-Dox with or without NIR laser irradiation at different pHs. (b) Controlled release of the Dox from Mgel-Dox by visible and NIR light irradiations (808 nm, 2 W/cm2, pH = 7.4, 25 °C). In order to avoid cargoes leaked in advance at body temperature (37 °C), we evaluate the Dox release at 37 °C, as shown in Figure S12 in the SI. Less than 30% Dox release from Mgel-Dox for 10 h, demonstrating the DNA microgels can avoid premature drug release at body temperature. This remote controllability of DNA microgels through NIR light could be smartly applied to on-demand dose in clinical therapy, thereby avoiding adverse effects caused by chemotherapeutic reagents toxicity and could provide enhanced therapeutic efficacy. Cellular internalization by magnetic core-shell DNA microgels. In vitro the intracellular release behaviour of Dox against human hepatoma cell lines HepG2 cells are investigated by confocal laser scanning microscopy (CLSM) and the results are 22

ACS Paragon Plus Environment

Page 23 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

shown in Figure 5. After incubating the HepG2 cells with Mgel-Dox for 4 h without laser treatment, the weak Dox fluorescence signal is observed in the cytoplasm and almost no fluorescent signals are observed in the nucleus (Figure 5b). On the contrary, most Dox are observed in cellular cytoplasm and nuclei after incubating for 4 h with a NIR laser (Figure 5a), indicating that more Dox are released from Mgel-Dox after irradiating to the laser and then diffused into the nuclei. The amount of released drugs is significantly increased by the photothermal effect. The change in the fluorescence images indicates that the remote heating generated by AuNRs improve the Dox release from the DNA microgels efficiently. Clearly, the results prove that the anticancer drugs can be effectively delivered into living cells by present nanocarrier controlled by external NIR light.

Figure 5. CLSM images of HepG2 cells after incubation with Mgel-Dox for 4 h with (a) or without (b) a NIR laser (808 nm, 2W/cm2, 10 min). The concentration of Dox in Mgel-Dox complexes is 10 µM. Cell cytotoxicity of Dox-loaded DNA microgels. As anti-cancer drug carriers, the first question is to determine the biocompatibility and killing efficacy of our proposed magnetic core-shell DNA microgels for cancer cells. The therapeutic effect of the core-shell DNA microgels on HepG2 cells is evaluated by the MTT assay. Firstly, 23

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

HepG2 cells are irradiated by 808 nm laser at the same power density of 2 W/cm2 for different times. As shown in Figure 6a, the cell viabilities are all above 90%, demonstrating that NIR laser irradiation of the HepG2 cells (10 min) have little influence on cell, which is attributed to the low NIR light absorption by these cells.56 Furthermore, the cell viabilities of the core-shell DNA microgels are all above 90% for different incubating times, indicating excellent biocompatibility of these nanomaterials (Figure 6b). It confirms that resulted magnetic core-shell DNA microgels can be acted as a drug carrier for cancer therapy. 120

120

a Cell Viability (%)

Cell Viability (%)

b

100

100 80 60 40

80 60 40

12 h 24 h 48 h

20

20 0

0

120

0 min

c

60 40 20 0

120

0

2

4

6

8

1

10

3

4

5

6

80 60 40 20 0

Dox concentraction in DNA microgels (M)

2

DNA microgel Free Dox Dox-loaded DNA microgel

d

100

Cell Viability (%)

80

0

DNA microgels concentraction (g/mL)

10 min

3 min 5 min

Free Dox Dox-loaded DNA microgels no laser Dox-loaded DNA microgels laser 10 min

100

Cell Viability (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 36

0 min

5 min

10 min

Figure 6. Cytotoxicity assays of (a) cells are exposed to a near-infrared laser at 808 nm (2 W/cm2) for 0, 3, 5 and 10 min, respectively, (b) cells incubated with core-shell DNA microgels at different concentrations, (c) cells incubated with free Dox, 24

ACS Paragon Plus Environment

Page 25 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Mgel-Dox with or without 808 nm (2 W/cm2), (d) cells incubated with core-shell DNA microgels (6.287 µg/mL), free Dox (10 µM), Mgel-Dox (the Dox in Mgel is 10 µM) by exposing to 808 nm (2 W/cm2) for 0, 5 and 10 min, respectively. Chemotherapy, one of the most effective treatment for cancer therapy, is overwhelmed to exact point-to-point drug release in clinical trials, making the long-term treatment of patients suffer heavy adverse effects. Multidrug resistance and overdose remain a challenge in the clinical situations even though the ideal therapeutic effects can achieve by employing a small amount of medications. Hence, shielding the high toxicity of chemotherapeutic agents and improving the killing efficacy of chemotherapeutic agents efficiently in due course are expected. As shown in Figure 6c, when treated with Mgel-Dox without a laser, HepG2 cells show dose-dependent cell inactivity and distinct higher cell inactivity than free Dox, indicating that the core-shell DNA microgels shield the high toxicity of chemotherapeutic agents efficiently. When exposure to a NIR laser, a distinct decrease of cell viability on HepG2 cells is induced by Mgel-Dox with a more than 2-fold lower IC50 of 3.063 μM compared to that without NIR irradiation (7.461 μM), indicating the NIR irradiation can be an efficient measure for regulating the therapeutic efficiency of Dox. During the time of transportation, the Dox can preserve in the network of the microgel shells, avoiding the healthy organs and tissues suffering severe adverse effects. When the Mgel-Dox is exposure to the NIR laser, Dox releases from the Mgel-Dox rapidly, resulting in the enhanced therapeutic efficiency of Dox. This high controllability of constructed Mgel-Dox is very 25

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

important in the clinical therapy. Multimodality theranostic platforms, which integrate discrete therapeutics into one platform and achieve higher therapeutic efficacy than that of each single mode, have attracted much attention.57 To certify whether the enhanced therapeutic effects induced by the synergy effects of Dox and photothermal property, HepG2 cells are incubated with free Dox and non-Dox-loaded DNA microgels, and then exposed to a 808 nm NIR laser, as shown in Figure 6d. The therapeutic effect of two cases is dramatic higher than that of the NIR-activated Mgel-Dox, demonstrating that the synergistic effect is not a key factor in this system. The enhanced killing efficiency of NIR-activated Mgel-Dox is contributed to the continuous release of Dox via photothermal despiralization of DNA sequences in microgel shells. It has been confirmed that the high controllability of created Mgel-Dox possesses excellent biocompatibility and highly therapeutic effect, which are potential to act as cancer therapeutic candidates. It is expected that our magnetic ionic liquid-based DNA microgels have the potential to become a clinically viable and versatile carrier for targeting and killing cancers.

Conclusions In summary, we design and construct unprecedented DNA-polymer microgels based on the specificity of ionic liquids with magnetic [FeCl3Br]- ions, NIR-light responsive AuNRs for magnetic the targeted delivery and controllable release of chemotherapy drugs. It should realize the construction of magnetic microgels without magnetic nanoparticles. Because of their facile fabrication, rapid responsiveness, and external 26

ACS Paragon Plus Environment

Page 26 of 36

Page 27 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

controllability, the light- and magneto-responsive DNA microgels can be used as promising drug vehicles. The DNA not only acts as crossing-linker agent but also can serve as a gatekeeper to regulate the release of drug. Internalization study and MTT assay demonstrate that the Dox loaded core-shell DNA microgels can efficiently uptake into cancer cells, enhance the cytotoxicity of cancer cells controlling by NIR laser and shield the high toxicity of chemotherapeutic agents to improve the killing efficacy of chemotherapeutic agents efficiently in due course. It can be controlled well by the NIR laser. Our results may provide opportunities for broad new functional nucleic-acid-based nanostructures and holds great promise as a candidate for the applications in field of nanomaterials and biomedicine.

Supporting Information Supporting Information is available is available free of charge on the ACS Publications website. Figures illustrating UV-vis spectra of gold nanorods, DNA microgels with an external magnetic field and DNA microgels in PBS buffer at different incubated time, 1H NMR spectra, mass spectrum and UV-vis spectra of [VBIM]FeCl3Br, FTIR spectra of Au@SiO2, Au@SiO2@MPS, Au@SiO2@Microgels, hydrodynamic radius of microgels in PBS buffer, images of the pre-filtered suspension and filtrates through syringe filters at varied temperature, TEM images of DNA microgels incubated in pH 7.4 for several months and DNA microgels incubated in the buffer solution of pH = 5.0, photographs the core-shell DNA microgels after showing the migration toward an applied external NdFeB magnet, SQUID magnetometry results of core-shell DNA microgels at 300 K, Dox release profiles 27

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

from Mgel-Dox at 37 °C and a video for the core-shell DNA microgels by applying the migration toward an applied external NdFeB magnet.

Acknowledgements This work was funded by the National Natural Science Foundation of China (Grant No. 21420102006) and the Specialized Research Fund for the Doctoral Program of Higher Education (20130131130005).

References (1) Sun, T.; Zhang, Y. S.; Pang, B.; Hyun, D. C.; Yang, M.; Xia, Y. Engineered Nanoparticles for Drug Delivery in Cancer Therapy. Angew. Chem. Int. Ed. 2014, 53, 12320-12364. (2) Coll, C.; Bernardos, A.; Martínez-Máñez, R.; Sancenón F. Gated Silica Mesoporous Supports for Controlled Release and Signaling Applications. Acc. Chem. Res. 2013, 46, 339-349. (3) Wei, H.; Zhuo, R.; Zhang, X. Design and Development of Polymeric Micelles with Cleavable Links for Intracellular Drug Delivery. Prog. Polym. Sci. 2012, 38, 503-535. (4) Hervault, A.; Dunn, A. E. Lim, M.; Boyer, C.; Dunn, A.; Mott, D.; Maenosono, S.; Thanh, N. T. K. Doxorubicin Loaded Dual pH-and Thermo-Responsive Magnetic Nanocarrier for Combined Magnetic Hyperthermia and Targeted Controlled Drug Delivery Applications. Nanoscale 2016, 8, 12152-12161. (5) Tamarov, K.; Xu, W.; Osminkina, L.; Zinovyev, S.; Soininen, P.; Kudryavtsev, A.; Gongalsky, M.; Gaydarova, A.; Närvänen, A.; Timoshenko, V.; Lehto, V. Temperature Responsive Porous Silicon Nanoparticles for Cancer Therapy-Spatiotemporal Triggering Through Infrared and Radiofrequency Electromagnetic Heating. J. Controlled Release 2016, 241, 220-228. (6) Wen, H.; Dong, C.; Dong, H.; Shen, A.; Xia, W.; Cai, X.; Song, Y.; Li, X.; Li, Y.; Shi, D. 28

ACS Paragon Plus Environment

Page 28 of 36

Page 29 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Engineered Redox-Responsive PEG Detachment Mechanism in PEGylated Nano-Graphene Oxide for Intracellular Drug Delivery. Small 2012, 8, 760-769. (7) Wen, J.; Anderson, S. M.; Du, J.; Yan, M.; Wang, J.; Shen. M.; Lu, Y.; Segura, T. Controlled Protein Delivery Based on Enzyme-Responsive Nanocapsules. Adv. Mater. 2011, 23, 4549-4553. (8) Lou, S.; Gao, S.; Wang, W.; Zhang, M.; Zhang, J.; Wang, C.; Li, C.; Konga, D.; Zhao, Q. Galactose-Functionalized Multi-Responsive Nanogels for Hepatoma-Targeted Drug Delivery. Nanoscale 2015, 7, 3137-3146. (9) Zhang, X.; Lü, S.; Gao, C.; Chen, C.; Zhang, X.; Liu, M. Highly Stable and Degradable Multifunctional Microgel for Self-Regulated Insulin Delivery Under Physiological Conditions Nanoscale 2013, 5, 6498-6506. (10) Qin, Y.; Chen, J.; Bi, Y.; Xu, X.; Zhou, H.; Gao, J.; Hu, Y.; Zhao, Y.; Chai, Z. Near-Infrared Light Remote-Controlled Intracellular Anti-cancer Drug Delivery Using Thermo/pH Sensitive Nanovehicle. Acta biomater. 2015, 17, 201-209. (11) Liu, G.; Liu, Z.; Li, N.; Wang, X.; Zhou, F.; Liu, W. Hairy Polyelectrolyte Brushes-Grafted Thermosensitive Microgels as Artificial Synovial Fluid for Simultaneous Biomimetic Lubrication and Arthritis Treatment. ACS Appl. Mater. Interfaces 2014, 6, 20452-20463. (12) Hamidi, M.; Azadi, A.; Rafiei, P. Hydrogel Nanoparticles in Drug Delivery. Adv. Drug Delivery Rev. 2008, 60, 1638-1649. (13) Ahmed, E. Hydrogel: Preparation, Characterization, and Applications: A review. J. Adv. Res. 2013, 6, 105-121. (14) Rahman, M. T.; Barikbin, Z.; Badruddoza, A. Z. M.; Doyle, P. S.; Khan, S. A. Monodisperse Polymeric Ionic Liquid Microgel Beads with Multiple Chemically Switchable Functionalities. 29

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir 2013, 29, 9535-9543. (15) Gu, Z.; Dang, T.; Ma, M.; Tang, B.; Cheng, H.; Jiang, S.; Dong, Y.; Zhang, Y.; Anderson, D. Glucose-Responsive Microgels Integrated with Enzyme Nanocapsules for Closed-Loop Insulin Delivery. ACS Nano 2013, 7, 6758-6766. (16) Zhang, X.; Lü, S.; Gao, C.; Chen, C.; Zhang, X.; Liu, M. Highly Stable and Degradable Multifunctional Microgel for Self-Regulated Insulin Delivery Under Physiological Conditions. Nanoscale 2013, 5, 6498-6506. (17) Gao, Y.; Xie, J.; Chen, H.; Gu, S.; Zhao, R.; Shao, J.; Jia, L. Nanotechnology-Based Intelligent Drug Design for Cancer Metastasis Treatment. Biotechnol. Adv. 2014, 32, 761-777. (18) Sailor, M. J.; Park, J. H. Hybrid Nanoparticles for Detection and Treatment of Cancer. Adv. Mater. 2012, 24, 3779-3802. (19) Park, J. H.; Maltzahn, G. V.; Ong, L. L.; Centrone, A.; Hatton T. A.; Ruoslahti, E., Bhatia S. N.; Sailor, M. G. Cooperative Nanoparticles for Tumor Detection and Photothermally Triggered Drug Delivery. Adv. Mater. 2010, 22, 880-885. (20) Park, J. H.; Maltzahn, G. V.; Xu, M. J.; Fogal, V.; Kotamraju, V. R. Ruoslahti, E.; Bhatia S. N.; Sailor, M. G. Cooperative Nanomaterial System to Sensitize, Target, and Treat Tumors. Proc. Natl. Acad. Sci. U.S.A. 2010, 107, 981-986. (21) Maltzahn, G. V.; Park, J. H.; Lin K. Y.; Singh, N.; Schwöppe, C.; Mesters, R.; Berdel, W. E.; Ruoslahti, E.; Sailor, M. G; Bhatia, S. N. Nanoparticles That Communicate In Vivo to Amplify Tumour Targeting. Nat. Mater. 2011, 10, 545-552. (22) Nayak, S.; Lyon, L. Y. Soft Nanotechnology with Soft Nanoparticles. Angew. Chem., Int. Ed. 2005, 44, 7686-7708. 30

ACS Paragon Plus Environment

Page 30 of 36

Page 31 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

(23) Khandare, J.; Calderon, M.; Dagia, N. M.; Haag, R. Multifunctional Dendritic Polymers in Nanomedicine: Opportunities and Challenges. Chem. Soc. Rev. 2012, 41, 2824-2848. (24) Wu, Q.; Wang, X.; Liao, C.; Wei, Q.; Wang, Q. Microgel Coating of Magnetic Nanoparticles via Bienzyme-Mediated Free-Radical Polymerization for Colorimetric Detection of Glucose. Nanoscale 2015, 7, 16578-16582. (25) Elk, M.; Lorenzato, C.; Ozbakir, B.; Oerlemans, C.; Storm, G.; Nijsen, F.; Decker,s R.; Vermonden, T.; Hennink, W. E. Alginate Microgels Loaded with Temperature Sensitive Liposomes for Magnetic Resonance Imageable Drug Release and Microgel Visualization. Eur. Polym. J. 2015, 72, 620-631. (26) Suzuki, K.; Yamaguchi, M.; Hotta, S.; Tanabe, N.; Yanagida, S. A New Alkyl-imidazole Polymer Prepared as An Inonic Polymer Electrolyte by in Situ Polymerization of Dye Densitized Solar Cells. J. Photochem. Photobiol. A 2004, 164, 81-85. (27) Li, F.; Cheng, F.; Shi, J.; Cai, F.; Liang, M.; Chen, J. Novel Quasisolid Electrolyte for Dye-Sensitized Solar Cells. J. Power Sources 2007, 165, 911-915. (28) Zhang, Y.; Zhao, L.; Patra, P.; Hu, D.; Ying, J. Y. Colloidal Poly-Imidazolium Salts and Derivatives. Nano Today 2009, 4, 13-20. (29) Brown, P.; Bushmelev, A.; Butts, C. P.; Cheng, J.; Eastoe, J.; Grillo, I.; Heenan, R. K.; Schmidt A. M. Magnetic Control Over Liquid Surface Properties with Responsive Surfactants. Angew. Chem. Int. Ed. 2012, 124, 2464 -2466. (30) Brown, P.; Bushmelev, A.; Butts, C. P.; Eloi, J. C.; Grillo, I.; Baker, P. G.; Schmidt, A. M.; Eastoe, J. Properties of New Magnetic Surfactants. Langmuir 2013, 29, 3246-3251. (31) Zhou, X.; Zhou, Y.; Nie, J.; Ji, Z.; Xu, J.; Zhang, X.; Du, B. Thermosensitive Ionic Microgels 31

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

via Surfactant-Free Emulsion Copolymerization and in Situ Quaternization Cross-Linking. ACS Appl. Mater. Interfaces 2014, 6, 4498-4513. (32) Zhou, X.; Nie, J.; Du, B. 4-(2-Pyridylazo)-Resorcinol Functionalized Thermosensitive Ionic Microgels for Optical Detection of Heavy Metal Ions at Nanomolar Level. ACS Appl. Mater. Interfaces 2015, 7, 21966-21974. (33) Schlossbauer, A.; Warncke, S.; Gramlich, P. M. E.; Kecht, J.; Manetto, A.; Carell, T.; Bein T. A Programmable DNA-Based Molecular Valve for Colloidal Mesoporous Silica. Angew. Chem. Int. Ed. 2010, 49, 4734-4737. (34) Yang, X.; Liu, X.; Liu, Z.; Pu, F.; Ren, J.; Qu, X. Near-Infrared Light-Triggered, Targeted Drug Delivery to Cancer Cells by Aptamer Gated Nanovehicles. Adv. Mater. 2012, 24, 2890-2895. (35) Chen, C.; Geng, J.; Pu, F.; Yang, X.; Ren, J.; Qu, X. Polyvalent Nucleic Acid/Mesoporous Silica Nanoparticle Conjugates: Dual Stimuli-Responsive Vehicles for Intracellular Drug Delivery. Angew. Chem. Int. Ed. 2011, 50, 882-886. (36) Zhu, C.; Lu, C.; Song, X.; Yang, H; Wang, H. Bioresponsive Controlled Release Using Mesoporous Silica Nanoparticles Capped with Aptamer-Based Molecular Gate. J. Am. Chem. Soc. 2011, 133, 1278-1281. (37) Ruiz-Hernandez, E.; Baeza, A.; Vallet-Regi, M. Smart Drug Delivery through DNA/Magnetic Nanoparticle Gates. ACS Nano 2011, 5, 1259-1266. (38) Wang, Y.; Yan, M.; Xu, L.; Zhao, W.; Wang, X.; Dong, S.; Hao, J. Aptamer-Functionalized DNA Microgels: A Strategy Towards Selective Anticancer Therapeutic Systems. J. Mater. Chem. B 2016, 4, 5446-5454. (39) Alkilany, A.; Lohse, S.; Murphy, C. The Gold Standard: Gold Nanoparticle Libraries to 32

ACS Paragon Plus Environment

Page 32 of 36

Page 33 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Understand the Nano-Bio Interface. Acc. Chem. Res. 2012, 46, 650-661. (40) Ye, X.; Zheng, C.; Chen, J.; Gao, Y.; Murray, C. Using Binary Surfactant Mixtures to Simultaneously Improve the Dimensional Tunability and Monodispersity in the Seeded Growth of Gold Nanorods. Nano Lett. 2013, 13, 765-771. (41) Gorelikov, I.; Matsuura, N. Single-Step Coating of Mesoporous Silica on Cethyltrimethyl ammonium Bromide-Capped Nanoparticles. Nano Lett. 2008, 8, 369-373. (42) Zhao, P.; Leng, Y.; Wang, J. Heteropolyanion-Paired Cross-Linked Ionic Copolymer: an Efficient Heterogeneous Catalyst for Hydroxylation of Benzene with Hydrogen Peroxide. Chem. Eng. J. 2012, 204, 72-78. (43) Abadeer, N. S.; Brennan, M. R.; Wilson, W. L.; Murphy, C. J. Distance and Plasmon Wavelength Dependent Fluorescence of Molecules Bound to Silica-Coated Gold Nanorods. ACS Nano 2014, 8, 8392-8406. (44) Wu, C.; Xu, Q. Stable and Functionable Mesoporous Silica-Coated Gold Nanorods as Sensitive Localized Surface Plasmon Resonance (LSPR) Nanosensors. Langmuir 2009, 25, 9441-9446. (45) Wang, G.; Chen, Z.; Chen, L. Mesoporous Silica-Coated Gold Nanorods: towards Sensitive Colorimetric Sensing of Ascorbic Acid via Target-Induced Silver Overcoating. Nanoscale 2011, 3, 1756-1759. (46) Liu, G.; Wang, H.; Yang, X. Synthesis of pH-sensitive Hollow Polymer Microspheres with Movable Magnetic Core. Polymer 2009, 50, 2578-2586. (47) Zhao, P.; Leng, Y.; Wang, J. Heteropolyanion-Paired Cross-Linked Ionic Copolymer: An Efficient Heterogeneous Catalyst for Hydroxylation of Benzene with Hydrogen Peroxide. Chem. 33

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 34 of 36

Eng. J. 2012, 204, 72-78. (48) Gao, B.; Chen, Y.; Zhang, Z. Preparation of Functional Composite Grafted Particles PDMAEMA/SiO2 and Preliminarily Study on Functionality. Appl. Surf. Sci. 2010, 257, 254-260. (49) Iyer1, A. K.; Khaled, G.; Fang, J.; Maeda, H. Exploiting the Enhanced Permeability and Retention Effect for Tumor Targeting. Drug Discovery Today 2006, 11, 812-818. (50) Hobbs, S. K.; Monsky, W. L.; Yuan, F.; Roberts, W. G.; Griffith, L.; Torchilin, V. P.; Jain, R. K. Regulation of Transport Pathways in Tumor Vessels: Role of Tumor Type and Microenvironment. Proc. Natl. Acad. Sci. U.S.A. 1998, 95, 4607-4612. (51) Kumar C. S. S. R.; Mohammad, F. Magnetic Nanomaterials for Hyperthermia-Based Therapy and Controlled Drug Delivery. Adv. Drug Delivery Rev. 2011, 63, 789-808. (52) Xu, L.; Feng, L.; Hao, J.; Dong, S. Controlling the Capture and Release of DNA with a Dual-Responsive Cationic Surfactant. ACS Appl. Mater. Interfaces 2015, 7, 8876-8885. (53) Wiersma, P. H.; Loeb, A. L.; Overbeek, J. TH. G. Calculation of the Electrophoretic Mobility of a Spherical Colloid Particle. J. Colloid Interface Sci. 1966, 22, 78-99. (54) O’Brien, R. W.; White, L. R. Electrophoretic Mobility of a Spherical Colloidal Particle. J. Chem. Soc. Faraday Trans. 1978, 74, 1607-1626. (55) Liang, H.; Zhang, X. B.; Lv, Y.; Gong, L.; Wang, R.; Zhu, X.; Yang, R.; Tan, W.

Functional

DNA-Containing Nanomaterials: Cellular Applications in Biosensing, Imaging, and Targeted Therapy. Acc. Chem. Res. 2014, 47, 1891-1901. (56) Huang, Y.; Sefah, K.; Bamrungsap, S.; Chang, H.; Tan, W. Selective Photothermal Therapy for Mixed Cancer Cells Using Aptamer-Conjugated Nanorods. Langmuir 2008, 24, 11860-11865. (57) Chen, Z.; Li, Z.; Wang, J.; Ju, E.; Zhou, L.; Ren, J.; Qu, X. A Multi-Synergistic Platform for 34

ACS Paragon Plus Environment

Page 35 of 36

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Sequential Irradiation-Activated High-Performance Apoptotic Cancer Therapy. Adv. Funct. Mater. 2014, 24, 522-529.

35

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

72&

ACS Paragon Plus Environment

Page 36 of 36