Off Switching of Mechanically Planar Chirality and Chiral

4 hours ago - We exploit a reversible acid-base triggered molecular shuttling process to switch an appropriately designed rotaxane between prochiral a...
1 downloads 0 Views 478KB Size
Subscriber access provided by UNIV OF SOUTHERN INDIANA

Communication

Chemical On/Off Switching of Mechanically Planar Chirality and Chiral Anion Recognition in a [2]Rotaxane Molecular Shuttle Stefano Corra, Christiaan de Vet, Jessica Groppi, Marcello La Rosa, Serena Silvi, Massimo Baroncini, and Alberto Credi J. Am. Chem. Soc., Just Accepted Manuscript • DOI: 10.1021/jacs.9b00941 • Publication Date (Web): 25 May 2019 Downloaded from http://pubs.acs.org on May 25, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

Chemical On/Off Switching of Mechanically Planar Chirality and Chiral Anion Recognition in a [2]Rotaxane Molecular Shuttle Stefano Corra,†,# Christiaan de Vet,†,# Jessica Groppi,† Marcello La Rosa,† Serena Silvi,‡ Massimo Baroncini,*,†,§ and Alberto Credi*,†,§ Center for Light Activated Nanostructures (CLAN), Dipartimento di Scienze e Tecnologie Agroalimentari, Università di Bologna, Via Gobetti 101, 40129 Bologna, Italy †



Dipartimento di Chimica “G. Ciamician”, Università di Bologna, Via Selmi 2, 40126 Bologna, Italy

Istituto per la Sintesi Organica e la Fotoreattività, Consiglio Nazionale delle Ricerche, Via Gobetti 101, 40129 Bologna, Italy §

Supporting Information Placeholder ABSTRACT: We exploit a reversible acid-base triggered

molecular shuttling process to switch an appropriately designed rotaxane between prochiral and mechanically planar chiral forms. The mechanically planar enantiomers and their interconversion, arising from ring shuttling, have been characterized by NMR spectroscopy. We also show that the supramolecular interaction of the positively charged rotaxane with optically active anions causes an imbalance in the population of the two enantiomeric co-conformations. This result represents an unprecedented example of chiral molecular recognition and can disclose innovative approaches to enantioselective sensing and catalysis.

(Figure 1a).8 When the ring and axle are interlocked, the improper symmetry operations of the separated components are not symmetry operations of the rotaxane, which therefore becomes chiral (Figure 1b).6 The synthesis of mechanically planar (MP) chiral rotaxanes was pioneered by Vögtle and coworkers,9 and further investigated in more recent times,10,11,12,13 when efficient and stereoselective methodologies have enabled the synthesis of highly enantiopure samples.14,15 The exploitation of MP stereogenic elements of MIMs for the development of novel chiroptical materials, enantioselective sensors and asymmetric catalysis, is a fascinating research topic with development opportunities.6,16

Mechanically interlocked molecules (MIMs)1,2 such as catenanes and rotaxanes may exhibit large amplitude motion of their interlocked components that renders them ideal candidates for the construction of molecular machines.2,3,4 While the absence of covalent bonds between the components enables facile relative movements, the mechanical constriction limits the possibilities for their mutual arrangement, with interesting outcomes from a stereochemical viewpoint. In fact chiral MIMs can be obtained by interlocking molecular components which are themselves achiral.5,6 This happens, for example, when an axle with C∞v symmetry – i.e., having a principal axis and mirror planes aligned along the axle length – is surrounded by a macrocycle with a Cs symmetry7 – i.e. having only one mirror plane coinciding with the plane of the ring 1 ACS Paragon Plus Environment

Journal of the American Chemical Society 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 8

that has identical extremities, provided that the ring is located on either side of the mirror plane at the center of the axle (Figure 1c).6,17 In other words, it is the position of the oriented macrocycle that desymmetrizes the axle component, yielding a MP chiral [2]rotaxane. In systems of this kind, ring shuttling along the axle leads to interconversion of the two enantiomers by passing through an achiral coconformation in which the ring is located in the center of the axle (Figure 1c). Only one co-conformationally mechanically planar chiral rotaxane has been reported to date, whose enantiomers were separated and their racemization rate was determined.17 However, in this case the position of the ring along the axle could not be controlled because of the absence of any recognition site. The relation between co-conformational dynamics and chirality13 in systems such as those shown in Figure 1c prompted us to investigate the possibility to exploit the stimuli-controlled switching of a molecular shuttle to enable MP chirality. Here we describe a [2]rotaxane that can be reversibly switched between prochiral and chiral states upon chemical stimulation. The presence of two enantiomers in the chiral state was probed experimentally, and the inversion of the MP stereogenic element via thermally activated ring shuttling was investigated. Finally, we report on the effect of optically active counteranions on the coconformational behavior and stereochemical properties of the positively charged rotaxane.

Figure 1. Schematic representation of: a C∞v symmetric axle and a Cs symmetric ring (a); the two enantiomers of a mechanically planar (MP) chiral rotaxane (b); the two enantiomers of a co-conformationally MP chiral rotaxane and their interconversion by ring shuttling through an achiral coconformation that features a mirror plane (c).

MP Chiral rotaxanes can also be obtained by interlocking a Cs symmetric macrocycle with an axle b

a

HPy

HPy

1H3+

R=

2H3+

R=H

R

O

t-Bu 3I t-Bu

+ N N N

+ Base

O

O

+ N O H2 O

O

O

+ N N N

t-Bu

+ Base

O O

HTr

+ Acid

t-Bu

O O

_

+ Acid R

R

t-Bu t-Bu

t-Bu 2I

O O + O N N O N O O

c

HTr O O

N H

O

+ N N N

O

t-Bu



_

t-Bu

t-Bu 2I

t-Bu

+ N N N

u

HTr

O

_

N H

O O + O N N O N O O O

t-Bu

O O

R = CH2OCH2C16H9

(Smp)-12+

R=H

22+

ENANTIOMERS SAME MOLECULE

( Rmp)-12+ 22+

Scheme 1. Rotaxanes 1H3+ and 2H3+ (top), and their base-triggered switching to 12+ and 22+ (bottom). The latter species can exist in two interconverting co-conformations, that constitute an enantiomeric pair for 12+ (see ref. 6 for the assignment of the absolute configurations) while they are the same molecule in the case of 22+. The starting rotaxanes are regenerated upon addition of an acid.

2 ACS Paragon Plus Environment

Page 3 of 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

We based our design on a crown ether macrocycle, and on dibenzylammonium and triazolium recognition sites located along the axle (Scheme 1) to exploit acidbase stimulation of the molecular shuttle.18,19,20 A dibenzo[24]crown-8 (DB24C8)-type ring encircles preferentially the ammonium center because of strong hydrogen bonding, and can be moved on the triazolium station upon deprotonation of the ammonium.

the deprotonated rotaxane they should resonate at different frequencies and form a coupled spin system.23

Rotaxanes 1H3+ and 2H3+, equipped respectively with an oriented (Cs) and a non-oriented (D2h) macrocycle (Scheme 1, top), were synthesized by stoppering of the corresponding pseudorotaxanes via CuAAC. In rotaxane 1H3+ the DB24C8 skeleton is desymmetrized by placing a substituent in the 4-position of one of its 1,2-dioxybenzene moieties. A pyrenyl tether was chosen as the ring orienting substituent, with the aim of (i) enhancing the transfer of chiral information with a large aromatic moiety, and (ii) having a fluorescent reporter for the switching process. In the symmetric rotaxane 2H3+ the ring is plain DB24C8. In both 1H3+ and 2H3+ the ring encircles the ammonium center, in line with literature data.18–20 We treated 2H3+ with a polymer-bound phosphazene base in CD2Cl2 to afford rotaxane 22+ (Scheme 1, bottom). The 1H NMR signal of HTr in 2H3+ (9.14 ppm) splits at low temperature into two, HcTr and HuTr, associated respectively with the complexed and uncomplexed triazolium station in slow exchange on the NMR timescale. Total line-shape analysis of HcTr and HuTr at various temperatures (Figure 2a) allowed us to estimate the shuttling activation parameters (see the SI). These results confirm that the crown ether encircles one of the two equivalent triazolium sites, and moves between them. Similar results were obtained upon deprotonation of 1H3+ to yield 12+ (Figure 2b), showing that the pyrenyl tether of the macrocycle does not affect the kinetics of the co-conformational equilibrium. In contrast with 22+, however, ring shuttling in 12+ generates a 50:50 population of two mirror image coconformations, that is, a racemic mixture of two enantiomers (Rmp)-12+ and (Smp)-12+.21 In this regard, 12+ is an example of a degenerate molecular shuttle22 whose co-conformations are energetically equivalent but not superimposable (Scheme 1, bottom). The presence of the MP enantiomers of 12+ in the racemate was confirmed by analyzing the NMR signals of the two methylene protons in the pyrenyl thether of the macrocycle, adjacent to the dioxybenzene unit (HPy, Scheme 1). These protons are enantiotopic – and thus isochronous – in 1H3+, while they become diastereotopic in 12+. We therefore envisioned that in

Figure 2. (a) Variable temperature (VT) 1H NMR spectra (500 MHz, CD2Cl2) of 22+ in the region of the triazolium protons ( HuTr, HcTr). (b) VT 1H NMR spectra (500 MHz, CD2Cl2) of 12+ in the regions of the triazolium protons (HuTr, HcTr; left) and of the methylene protons in the pyrenyl tether of the macrocycle, adjacent to the dioxybenzene unit (HaPy, HbPy; right). See Scheme 1 and SI for proton labeling.

The 1H NMR spectra of 12+ recorded at 223 K and 203 K showed that the signal at 4.60 ppm, associated with HPy, consistently splits into a couple of two almost overlapped doublets (Figure 2b).24 Additionally, u/c analysis of the signals corresponding to Ha/b Py and HTr in CD2Cl2 revealed that the rate constants for shuttling (ksh) and racemization (krac) are approximately the same (see the SI). This observation confirms that in 12+ ring shuttling and inversion of the MP chiral configuration are two aspects of the same phenomenon (Scheme 1) which, interestingly, can be monitored separately. In fact, while the exchange of HuTr and HcTr (Figure 2b, left) yields information on the ring shuttling rate – an observation that can also be made for 22+ (Figure 2a) – the exchange of HaPy and HbPy (Figure 2b, right) is related to the racemization rate. This set of results is 3

ACS Paragon Plus Environment

Journal of the American Chemical Society 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

consistent with the emergence of two enantiomers of 12+ upon deprotonation. The switching of 1H3+/12+ can also be followed by absorption and luminescence spectroscopy (Figure 3). The spectrum of 1H3+ shows an absorption tail in the 280-430 nm region assigned to a charge-transfer interaction between the pyrenyl electron donor and a triazolium electron acceptor. Such a tail disappears in 12+, presumably because the pyrenyl unit cannot undergo efficient electronic interactions with either triazolium unit (the complexed one is surrounded by the crown ether, and the free one is relatively distant). Consistently, in 1H3+ the pyrenyl fluorescence is strongly quenched with respect to the free macrocycle,19d,g and it is 5-fold enhanced upon addition of base. Such a luminescence turn-on behavior provides a useful signal to monitor the occurrence of the chiral state, even by the naked eye (see the SI).

Figure 3. Absorption and fluorescence (inset, exc = 328 nm) spectra of the free macrocycle (black), 1H3+ (blue) and 12+ (red). Air equilibrated CH2Cl2, 20°C.

Having confirmed that 12+ exists as a dynamic racemic mixture of (Smp) and (Rmp) forms, we investigated the possibility to induce an enantiomeric excess. Since the triazolium stations are positively charged, an interesting option is ion pairing with an optically active anion.25 In such a case, two diastereomeric salts would be formed, which can have different energies and thus exhibit unbalanced populations of the macrocycles on the stations (Figure 4a). Upon addition of the enantiopure anion (1S)-(+)-10camphorsulfonate [(+)-CS] (tetrabutylammonium salt) to 12+ in CD2Cl2 at 223 K, the NMR signal of the HuTr proton – that appears as a singlet at 9.14 ppm in the iodide salt – splits into two singlets with different intensities (∆ = 0.02 ppm; Figure 4b, left), assigned to

Page 4 of 8

the two different diastereomeric ion pairs (analysis of other resonances also supports this interpretation; see the SI). Deconvolution of these peaks affords a diastereomeric ratio of 85:15, which corresponds to a difference in stability of the two diastereoisomers of 3.2 kJ mol–1. Titration data show that the diastereomeric ratio does not depend on the CS/12+ stoichiometry. Moreover, the spectra recorded upon addition of the opposite enantiomer [(–)-CS] display identical resonances and integral ratio, in full agreement with the formation of a diastereomeric pair that is enantiomerically related to that observed upon addition of (+)-CS (see the SI). In all cases the signal of HuTr shifts downfield from 9.14 ppm to 9.58 ppm (major diastereoisomer), confirming that the sulfonate anion is coordinated by the free triazolium unit of the rotaxane.25 Conversely, the fact that the signal of HcTr is almost unaffected by the presence of the anion indicates that the macrocycle wrapped around the triazolium prevents a tight ion pairing. Taken together, these observations (see also the SI) suggest that the ring-axle arrangement in 12+ creates a nonsymmetric environment around the unencircled triazolium such that enantioselective anion recognition can take place. The encircled triazolium site does not effectively compete for anion binding and it does not contribute to the stereodifferentiation. The fact that the recognition occurs relatively far away from the site of the mechanical entanglement – where the stereogenic unit is formally located – is quite remarkable.26 A possible explanation is that the molecule folds to create a ‘chiral pocket’ similar to that of an enzyme, suggesting that such MIMs can have significant potential in chiral sensing. The addition of tetrabutylammonium -TRISPHAT27 to 12+ in toluene-d8 at 243 K28 also causes a splitting of the NMR singlet corresponding to the HuTr proton into two overlapping singlets (∆ = 0.02 ppm; Figure 4b, right). Integration of these signals, however, revealed that the two diastereoisomers have the same concentration within errors. Thus, -TRISPHAT plays the role of a chiral shift reagent27 by ion-pairing with 12+ in an apolar solvent, but enantioselective molecular recognition does not occur. Presumably, the large and soft TRISPHAT anion, being loosely bound to the triazolium site, is unable to ‘read’ the mechanical chirality of 12+ and determine an imbalance of its two co-conformations.

4 ACS Paragon Plus Environment

Page 5 of 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

Furthermore, we have induced a difference in the population of the stations by interaction with an optically active anion, which is of interest for, e.g., enantioselective sensing and catalysis,16ab,29 or activating molecular machines with a chiral trigger. Considering the central role of chirality in chemistry, and the fact that mechanical chirality of MIMs is often overlooked,30 studies of this kind not only have exciting implications for basic science, but can also open new avenues for the development of molecular devices and materials for practical applications. ASSOCIATED CONTENT The Supporting Information is available free of charge on the ACS Publications website. General methods and experimental procedures, synthesis, NMR and CD spectra (PDF).

AUTHOR INFORMATION Corresponding Author

*[email protected], [email protected] Author Contributions #S.

C. and C. d. V. contributed equally.

ACKNOWLEDGMENT Figure 4. (a) Interconversion between two diastereomeric ion pairs composed of a co-conformationally MP chiral rotaxane dication, such as 12+, and a chiral monoanion. In the proposed structures, one anion is coordinated to the unencircled triazolium, while another is weakly paired with the encircled site. Simplified potential energy curves for the location of the ring along the axle are also shown. As the two ion pairs can have different stabilities [ G°  0], the ring distribution between the two identical stations can become unbalanced. (b) Partial 1H NMR spectra (500 MHz) of the HuTr resonance in 12+ after the addition of 8 equivalents of the tetrabutylammonium salt of (1S)-(+)-10-camphorsulfonate (CD2Cl2, 223 K; left) or -TRISPHAT (toluene-d8, 243 K; right). Black, red and grey traces show respectively the experimental spectrum, the deconvoluted peaks, and the fitting residuals.

In summary, we have described a three-station molecular shuttle that can be switched reversibly between symmetric prochiral and desymmetrized mechanically planar chiral states. The two enantiomers in the chiral state have been observed, and their interconversion – caused by thermally driven shuttling between two identical stations – has been quantitatively characterized. We have established a clear connection between the stimuli-controlled dynamic behavior of rotaxanes (i.e. their molecular machine aspect) and the unique stereochemical features arising from the mechanical bond.

We thank Prof. Steve Goldup for fruitful discussions and Dr. Massimo Capobianco for assistance in the MS experiments. This work was supported by the European Research Council (H2020 AdG n. 692981) and the Ministero dell'Istruzione, Università e Ricerca (FARE grant n. R16S9XXKX3).

REFERENCES (1) Sauvage, J.-P.; Dietrich-Buchecker, C. Molecular Catenanes, Rotaxanes and Knots; Wiley: New York, 1999. (2) Bruns, C. J.; Stoddart, J. F. The Nature of the Mechanical Bond: From Molecules to Machines; Wiley: Hoboken, 2016. (3) Balzani, V.; Credi, A.; Venturi, M. Molecular Devices and Machines – Concepts and Perspectives for the Nanoworld; Wiley-VCH: Weinheim, 2008. (4) Erbas-Cakmak, S.; Leigh, D. A.; McTernan, C. T.; Nussbaumer, A. L. Artificial Molecular Machines. Chem. Rev. 2015, 115, 10081-10206. (5) Evans, N. H. Chiral Catenanes and Rotaxanes: Fundamentals and Emerging Applications. Chem. Eur. J. 2018, 24, 3101-3112. (6) Jamieson, E. M. G.; Modicom, F.; Goldup, S. M. Chirality in Rotaxanes and Catenanes. Chem. Soc. Rev. 2018, 47, 5266-5311. (7) A molecular ring with Cs (or C1h) symmetry is often said to be “oriented”, because it is usually obtained by placing substituents in appropriate positions around the macrocycle skeleton. (8) Schill, G. Catenanes, Rotaxanes and Knots; Academic Press: New York, 1971. (9) Yamamoto, C.; Okamoto, Y.; Schmidt, T.; Jäger, R.; Vögtle, F. Enantiomeric Resolution of Cycloenantiomeric Rotaxane, Topologically Chiral Catenane, and Pretzel-Shaped Molecules:  Observation of Pronounced Circular Dichroism. J. Am. Chem. Soc.

5 ACS Paragon Plus Environment

Journal of the American Chemical Society 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1997, 119, 10547-10548. (10) Schalley, C. A.; Beizai, K.; Vögtle, F. On the Way to Rotaxane-Based Molecular Motors: Studies in Molecular Mobility and Topological Chirality. Acc. Chem. Res. 2001, 34, 465-476. (11) Kameta, N.; Hiratani, K.; Nagawa, Y. A Novel Synthesis of Chiral Rotaxanes via Covalent Bond Formation. Chem. Commun. 2004, 466-467. (12) Makita, Y.; Kihara, N.; Nakakoji, N.; Takata, T.; Inagaki, S.; Yamamoto, C.; Okamoto, Y. Catalytic Asymmetric Synthesis and Optical Resolution of Planar Chiral Rotaxane. Chem. Lett. 2007, 36, 162-163. (13) Gell, C. E.; Mcardle-Ismaguilov, T. A.; Evans, N. H. Modulating the Expression of Chirality in a Mechanically Chiral Rotaxane. Chem. Commun. 2019, 55, 1576-1579. (14) Bordoli, R. J.; Goldup, S. M. An Efficient Approach to Mechanically Planar Chiral Rotaxanes. J. Am. Chem. Soc. 2014, 136, 4817-4820. (15) Jinks, M. A.; de Juan, A.; Denis, M.; Fletcher, C. J.; Galli, M.; Jamieson, E. M. G.; Modicom, F.; Zhang, Z.; Goldup, S. M. Stereoselective Synthesis of Mechanically Planar Chiral Rotaxanes. Angew. Chem. Int. Ed. 2018, 57, 14806-18410. (16) (a) Kameta, N.; Nagawa, Y.; Karikomi, M.; Hiratani, K. Chiral Sensing for Amino Acid Derivative Based on a [2]Rotaxane Composed of an Asymmetric Rotor and an Asymmetric Axle. Chem. Commun. 2006, 3714-3716. (b) Ishiwari, F.; Nakazono, K.; Koyama, Y.; Takata, T. Induction of Single-Handed Helicity of Polyacetylenes Using Mechanically Chiral Rotaxanes as Chiral Sources. Angew. Chem. Int. Ed. 2017, 56, 14858-14862. (c) Hirose, K.; Ukimi, M.; Ueda, S.; Onoda, C.; Kano, R.; Tsuda, K.; Hinohara, Y.; Tobe, Y. The Asymmetry is Derived from Mechanical Interlocking of Achiral Axle and Achiral Ring Components – Syntheses and Properties of Optically Pure [2]Rotaxanes. Symmetry 2018, 10, 20. (17) Mochizuki, Y.; Ikeyatsu, K.; Mutoh, Y.; Hosoya, S.; Saito, S. Synthesis of Mechanically Planar Chiral rac-[2]Rotaxanes by Partitioning of an Achiral [2]Rotaxane: Stereoinversion Induced by Shuttling. Org. Lett. 2017, 19, 4347-4350. (18) (a) Coutrot, F.; Busseron, E. A New Glycorotaxane Molecular Machine Based on an Anilinium and a Triazolium Station. Chem. Eur. J. 2008, 14, 4784-4787. (b) Coutrot, F. A Focus on Triazolium as a Multipurpose Molecular Station for pH-Sensitive Interlocked Crown-Ether-Based Molecular Machines, ChemistryOpen 2015, 4, 556-576. (19) Recent examples of rotaxanes: (a) Yang, W.; Li, Y.; Zhang, J.; Yu, Y.; Liu, T.; Liu, H.; Li, Y. Synthesis of a [2]Rotaxane Operated in Basic Environment. Org. Biomol. Chem. 2011, 9, 6022-6026. (b) Blanco, V.; Leigh, D. A.; Marcos, V.; Morales-Serna, J. A.; Nussbaumer, A. L. A Switchable [2]Rotaxane Asymmetric Organocatalyst That Utilizes an Acyclic Chiral Secondary Amine. J. Am. Chem. Soc. 2014, 136, 4905-4908. (c) Meng, Z.; Xiang, J.-F.; Chen, C.-F. Directional Molecular Transportation Based on a Catalytic Stopper-Leaving Rotaxane System. J. Am. Chem. Soc. 2016, 138, 5652-5658. (d) Ragazzon, G.; Credi, A.; Colasson, B. Thermodynamic Insights on a Bistable Acid–Base Switchable Molecular Shuttle with Strongly Shifted Co-conformational Equilibria. Chem. Eur. J. 2017, 23, 2149-2156. (e) Erbas-Cakmak, S.; Fielden, S. D. P.; Karaca, U.; Leigh, D. A.; McTernan, C. T.; Tetlow, D. J.; Wilson, M. R. Rotary and Linear Molecular Motors Driven by Pulses of a Chemical Fuel. Science 2017, 358, 340-343. (f) Waeles, P.; Fournel-Marotte, K.; Coutrot, F. Distinguishing Two Ammonium and Triazolium Sites of Interaction in a Three-Station [2]Rotaxane Molecular Shuttle. Chem. Eur. J. 2017, 23, 11529-11539. (g) Ghosh, A.; Paul, I.; Adlung, M.; Wickleder, C.; Schmittel, M. Oscillating Emission of [2]Rotaxane Driven by Chemical Fuel. Org. Lett. 2018, 20, 1046-1049. (h) Zhu, K.; Baggi, G.; Loeb, S. J. Ring-Through-Ring Molecular Shuttling in a Saturated [3]Rotaxane. Nat. Chem. 2018,

Page 6 of 8

10, 625-630. (i) Chen, S.; Wang, Y.; Nie, T.; Bao, C.; Wang, C.; Xu, T.; Lin, Q.; Qu, D.-H.; Gong, X.; Yang, Y.; Zhu, L.; Tian, H. An Artificial Molecular Shuttle Operates in Lipid Bilayers for Ion Transport. J. Am. Chem. Soc. 2018, 140, 17992-17998. (20) Recent examples of other MIMs: (a) Meng, Z.; Wang, L.N.; Xiang, J.-F.; He, S.-G.; Chen, C.-F. Stepwise Motion in a Multivalent [2](3)Catenane. J. Am. Chem. Soc. 2015, 137, 9739-9745. (b) Goujon, A.; Lang, T.; Mariani, G.; Moulin, E.; Fuks, G.; Raya, J.; Buhler, E.; Giuseppone, N. Bistable [c2] Daisy Chain Rotaxanes as Reversible Muscle-like Actuators in Mechanically Active Gels. J. Am. Chem. Soc. 2017, 139, 14825-14828. (c) Zhang, Q.; Rao, S.-J.; Xie, T.; Li, X.; Xu, T.-Y.; Li, D.-W.; Qu, D.-H.; Long, Y.-T.; Tian, H. Muscle-like Artificial Molecular Actuators for Nanoparticles. Chem 2018, 4, 26702684. (21) For a discussion on the assignment of absolute stereochemistry of mechanically planar chiral rotaxanes, see ref. [6] and: Reuter, C.; Mohry, A.; Sobanski, A.; Vögtle, F. [1]Rotaxanes and Pretzelanes: Synthesis, Chirality, and Absolute Configuration. Chem. Eur. J. 2000, 6, 1674-1682. (22) Anelli, P. L.; Spencer, N.; Stoddart, J. F. A Molecular Shuttle. J. Am. Chem. Soc. 1991, 113, 5131-5133. (23) Jennings, W. B. Chemical Shift Nonequivalence in Prochiral Groups. Chem. Rev. 1975, 75, 307-322. (24) Similar molecular examples: (a) Egan, W.; Tang, R.; Zon, G.; Mislow, K. Low Barrier to Pyramidal Inversion in Phospholes. Measure of Aromaticity. J. Am. Chem. Soc. 1970, 92, 1442-1444. (b) Anet, F. A. L.; Jochims, J. C.; Bradley, C. H. Energy Barrier of Racemization in Diisopropylcarbodiimide. J. Am. Chem. Soc. 1970, 92, 2557-2558. (25) (a) Hua, Y.; Flood, A. H. Click Chemistry Generates Privileged CH Hydrogen-bonding Triazoles: The Latest Addition to Anion Supramolecular Chemistry. Chem. Soc. Rev. 2010, 39, 12621271. (b) Evans, N. H.; Beer, P. D. Advances in Anion Supramolecular Chemistry: From Recognition to Chemical Applications. Angew. Chem. Int. Ed. 2014, 53, 11716-11754. (26) Morrow, S. M.; Bissette, A. J.; Fletcher, S. P. Transmission of Chirality Through Space and Across Length Scales. Nat. Nanotechnol. 2017, 12, 410-419. (27) TRISPHAT = [Tris(tetrachlorobenzenediolato) phosphate(V)]. For its use as a chiral shift reagent, see: Lacour, J.; Ginglinger, C.; Favarger, F.; Torche-Haldimann, S. Application of TRISPHAT anion as NMR chiral shift reagent. Chem. Commun. 1997, 2285-2286. (28) The solvent was changed from CD2Cl2 to toluene-d8 in order to favor ion pairing and thus enhance chiral shift effects on the signals. The 1H NMR spectra of 12+·2I– in toluene-d8 are consistent with those in CD2Cl2. (29) See, e.g.: (a) Cakmak, Y.; Erbas-Cakmak, S.; Leigh, D. A. Asymmetric Catalysis with a Mechanically Point-Chiral Rotaxane. J. Am. Chem. Soc. 2016, 138, 1749-1751. (b) Eichstaedt, K.; JaramilloGarcia, J.; Leigh, D. A.; Marcos, V.; Pisano, S.; Singleton, T. A. Switching between Anion-Binding Catalysis and Aminocatalysis with a Rotaxane Dual-Function Catalyst. J. Am. Chem. Soc. 2017, 139, 9376-9381. (c) Lim, J. Y. C.; Marques, I.; Felix, V.; Beer, P. D. Enantioselective Anion Recognition by Chiral Halogen-Bonding [2]Rotaxanes. J. Am. Chem. Soc. 2017, 139, 12228-12239. (30) See, e.g., ref. 19i and: (a) Li, J.; Li, Y.; Guo, Y.; Xu, J.; Lv, J.; Li, Y.; Liu, H.; Wang, S.; Zhu, D. A Novel Supramolecular System: Combination of Two Switchable Processes in a [2]Rotaxane. Chem. Asian J. 2008, 3, 2091-2096. (b) Iwamoto, H.; Yawata, Y.; Fukazawa, Y.; Haino, T. Highly Efficient Synthesis of [3]Rotaxane Assisted by Preorganisation of Pseudorotaxane Using bis(Crown Ether)s. Supram. Chem. 2010, 22, 815-826. (c) Wang, X.-Y.; Han, J.-M.; Pei, J. Energy Trabfer and Concentration-Dependent Conformational Modulation: A Porpyrin-Containing [3]Rotaxane. Chem. Asian J.

6 ACS Paragon Plus Environment

Page 7 of 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

2012, 7, 2429-2437. (d) Bleve, V.; Schaefer, C.; Franchi, P.; Silvi, S.; Mezzina, E.; Credi, A.; Lucarini, M. Reversible Mechanical Switching of Magnetic Interactions in a Molecular Shuttle. ChemistryOpen 2015, 4, 18-21.

7 ACS Paragon Plus Environment

Journal of the American Chemical Society 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 8

Table of Contents artwork

8 ACS Paragon Plus Environment