Palladium-Catalyzed Conjugate Addition of Arylboronic Acids to β,β

Aug 3, 2015 - (1) Nickel-catalyzed conjugate additions of arylaluminum ... pyridinooxazoline (Pyox)(10) and bisoxazoline (Box)(11) ligands as catalyst...
0 downloads 0 Views 512KB Size
Page 1 of 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

Palladium-Catalyzed Conjugate Addition of Arylboronic Acids to β,β-Disubstituted Enones in Aqueous Media: Formation of Bis-benzylic and ortho -Substituted Benzylic Quaternary Centers Ryan Van Zeeland and Levi M. Stanley* Department of Chemistry, Iowa State University, Ames, Iowa 50011, United States R2 B(OH) 2

O

n R n = 0-2

1

Pd(II) catalyst (1-5 mol %) aq. NaTFA 100 °C

R1 = alkyl or aryl

O

R2

n R1 up to 99% yield

bis-benzylic all-carbon quaternary centers O

Cl 72% yield

OMe

ABSTRACT: Palladium-catalyzed conjugate addition of arylboronic acids to β,β-disubstituted enones in aqueous media is reported. Additions of a wide range of arylboronic acids to β,β-disubstituted enones occur to form ketone products bearing benzylic allcarbon quaternary centers. These reactions are promoted by a simple catalyst prepared from Pd(TFA)2 and 2,2´-bipyridine. The use of aqueous NaTFA as the reaction medium significantly enhances reactivity and enables the formation of challenging bisbenzylic and ortho-substituted benzylic all-carbon quaternary centers.

KEYWORDS: conjugate addition, quaternary center, palladium, aqueous media, arylboronic acid Transition metal-catalyzed conjugate addition of aryl nucleophiles to β,β-disubstituted enones is a valuable approach to construct benzylic all-carbon quaternary centers.1 Nickelcatalyzed conjugate additions of arylaluminum reagents2 and copper-catalyzed additions of arylaluminum,3 arylmagnesium,4 and arylzinc5 reagents are established methods to generate benzylic all-carbon quaternary centers. These processes involve air- and/or moisture-sensitive organometallic nucleophiles and typically do not occur in aqueous media. In contrast, rhodium- and palladium-catalyzed conjugate additions of air- and moisture-stable tetraarylborates,6 arylboroxines7 and arylboronic acids8,9 form the corresponding ketones containing benzylic quaternary carbon centers in high yields, and, in several cases, with high enantioselectivities. In recent years, palladium-catalyzed conjugate additions of arylboronic acids to β,β-disubstituted enones have emerged as a primary target for further development due to the stability, functional group compatibility, and commercial availability of arylboronic acids.9-11 Conjugate additions of a wide range of arylboronic acids to β,β-disubstituted enones occur in high yields when the reactions are conducted in the presence of readily accessible palladium (II) complexes of 2,2ʹ′-bipyridine (2,2ʹ′-bpy).9 In addition, Stoltz and Minnaard have developed highly enantioselective variants of these reactions using palladium (II) complexes of chiral, non-racemic pyridinooxazoline (Pyox)10 and bisoxazoline (Box)11 ligands as catalysts.

A) O

B(OH) 2 +

Pd(II) catalyst

O

R

R CH 3 R = CH 3, OCH3, F, Cl, Br Previous studies This work (5-10 mol % Pd) (1-5 mol % Pd in aqueous NaTFA) 7-70% yield 35-87% yield B) O O Pd(II) catalyst + Ar2 B(OH) 2 Ar2 Ar1 Ar1 CH 3

Previous studies

This work (in aqueous NaTFA)

No reaction

54-74% yield

Scheme 1. Current Challenges in Pd-Catalyzed Conjugate Addition of Arylboronic Acids to β,β-Disubstituted Enones Although current palladium catalysts promote conjugate additions of arylboronic acids to form ketones containing benzylic quaternary carbon centers, additions of ortho-substituted arylboronic acids to β,β-disubstituted enones and reactions to generate bis-benzylic quaternary centers remain challenging. (Scheme 1). Palladium-catalyzed conjugate additions of orthosubstituted arylboronic acids to β,β-disubstituted enones often result in low yields of the corresponding ketone products and require high loadings of the palladium catalyst (Scheme 1A).10b-c,11b In addition, palladium-catalyzed conjugate addi-

ACS Paragon Plus Environment

ACS Catalysis

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

tions of arylboronic acids to β-aryl β,β-disubstituted enones have not been reported to form bis-benzylic quaternary carbon centers (Scheme 1B). Herein, we report studies to identify a combination of palladium catalyst and aqueous reaction conditions to address these limitations and enable the formation of ketones containing sterically encumbered benzylic and bisbenzylic all-carbon quaternary centers. At the outset of our studies, we noted a report by Stoltz indicating that the presence of water increases the overall rate of palladium-catalyzed conjugate additions to β,β-disubstituted enones.10c We hypothesized that the choice of aqueous reaction medium may also function to enhance the reactivity of palladium catalysts such that ortho-substituted benzylic and bis-benzylic all-carbon quaternary centers could be readily formed in these reactions. To test our hypothesis, we evaluated the Pd(II)-catalyzed addition of phenylboronic acid to 3methylcyclohex-2-en-1-one 1a in a variety of aqueous reaction media (Table 1). Table 1. Identification of Reaction Conditionsa O

O

PhB(OH) 2 (1.5 equiv) PdX 2 (1.0 mol %) 2,2!-bpy (1.2 mol %)

Ph

CH 3 1a

2a

CH 3

Page 2 of 5

matic impact on the yield of 2a (entries 4-6). For example, the addition of phenylboronic acid to 1a formed 2a in 88% when the reaction was conducted in the presence of 50 mM aqueous NaTFA (pH = 7) (entry 6). The reaction temperature, pH of the aqueous reaction medium, and the identity of the Pd(II) salt also impact the efficiency of the Pd(II)-catalyzed addition of phenylboronic acid to 1a. Ketone 2a is formed in 95-97% yield when the reaction is conducted in 50 mM aqueous NaTFA at 100 °C with catalysts generated from 2,2´-bipyridine and either Pd(OAc)2 or Pd(TFA)2 (entries 7 and 8). The combination of a palladium catalyst generated from Pd(TFA)2 and a higher reaction temperature enabled us to lower the loading of phenylboronic acid to 1.2 equiv with only a modest decrease in the yield of 2a (entry 9). The pH of the reaction medium dramatically influences the efficiency of the model reaction (entries 10 and 11). The addition of phenylboronic acid to 1a under slightly acidic conditions leads to a significant decrease in the yield of 2a (62% yield, entry 10). In contrast, the model reaction forms 2a in nearly quantitative yield when the reaction is conducted under basic conditions (99% yield, entry 11). Under these reaction conditions, the loading of the palladium catalyst can be lowered to 0.5 mol % without impacting the yield of 2a, but a decrease in reaction efficiency is observed upon lowering the catalyst loading to 0.25 mol % (entries 12 and 13). O

entry

reaction medium

temp (°C)

pH

X

Yield (%)b

1

9:1 MeOH:H2O

80

7

OAc

58

2

1:1 MeOH:H2O

80

7

OAc

53

3

1:9 MeOH:H2O

80

7

OAc

52

4

1:9 MeOH:

80

7

OAc

70

+

Ar B(OH) 2

CH3 O

O

CH3

5

50 mM NaOAc

80

7

OAc

85

6

50 mM NaTFA

80

7

OAc

88

7

50 mM NaTFA

100

7

OAc

95

50 mM NaTFA

100

7

TFA

97

50 mM NaTFA

100

7

TFA

91

9

10c

50 mM NaTFA

100

6.5

TFA

62

11

c,d

50 mM NaTFA

100

8.2

TFA

99

12

c,e

50 mM NaTFA

100

8.2

TFA

99

13c,f

50 mM NaTFA

100

8.2

TFA

60

O

The reaction of 1a with 1.5 equiv of phenylboronic acid in the presence of a catalyst prepared from Pd(OAc)2 and 2,2´bipyridine was initially evaluated in MeOH:H2O mixtures ranging from 9:1 to 1:9 (entries 1-3). The ratio of MeOH to water has little impact on the yields of 3-methyl-3phenylcyclohexan-1-one 2a (52-58%). However, increasing the ionic strength of the aqueous reaction medium has a dra-

2b (R = CH3): 91% R 2c (R = t-Bu): 90% 2d (R = OCH3): 91% 2e (R = Cl): 92% 2f (R = Br): 82% 2g (R = CF3): 82%

CH3 R

O

CH3

R 2k (R = CH3): 88% 2l (R = F): 81%

CH3 2h (R = CH3): 83% 2i (R = OCH3): 90% 2j (R = Cl): 86%

CH3

O ortho-substituted benzylic quaternary carbon centers

a

Reaction conditions: 1a (1.0 mmol), PhB(OH)2 (1.5 mmol), PdX2 (0.010 mmol), 2,2ʹ′-bpy (0.012 mmol), reaction medium (0.33 mL), 16 h. bDetermined by 1H NMR spectroscopy using dibromomethane as an internal standard. cReactions performed with 1.2 equiv PhB(OH)2. dReaction run for 2 h. eReaction run for 4 h in the presence of 0.5 mol % Pd(TFA)2 and 0.6 mol % 2,2ʹ′bpy. fReaction run for 8 h in the presence of 0.25 mol % Pd(TFA)2 and 0.3 mol % 2,2ʹ′-bpy.

Ar 2a-q

2a: 90% (84%) b,c

c

O

50 mM aq. NaTFA pH = 8.2, 100 °C

1a

50 mM NaOAc

8

Pd(TFA) 2 (1.0 mol %) 2,2!-bpy (1.2 mol %)

R

CH3

R

2m (R = CH3): 35%c 2n (R = OCH3): 83% 2o (R = F): 87%c 2p (R = Cl): 75%d 2q (R = Br): 53%d

a

Reaction conditions: 1a (1.0 mmol), arylboronic acid (1.2 mmol), Pd(TFA)2 (0.010 mmol), 2,2ʹ′-bpy (0.012 mmol), 50 mM aq. NaTFA (0.33 mL, pH = 8.2), 100 °C, 2-24 h. Isolated yields are reported after purification by flash column chromatography. b Reaction performed with 2.0 equiv PhBpin in place of PhB(OH)2. cReaction run in the presence of 2.0 mol % Pd(TFA)2 and 2.4 mol % 2,2ʹ′-bpy with 2.0 equiv ArB(OH)2. dReaction run in the presence of 5 mol % Pd(TFA)2 and 6 mol % 2,2ʹ′-bpy with 2.0 equiv ArB(OH)2.

Scheme 2. Pd-Catalyzed Addition of Arylboronic Acids to 1a in Aqueous NaTFAa

ACS Paragon Plus Environment

Page 3 of 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

We chose to proceed with studies to evaluate additions of a variety of arylboronic acids to 1a under the reaction conditions identified in entry 11 of Table 1. These results are summarized in Scheme 2. As noted above, the addition of phenylboronic acid to 1a occurs to form 2a in high yield. The addition of the related phenylboronic acid pinacol ester to 1a occurs to form 2a in 84% yield when the reaction is conducted with 2 mol % Pd catalyst. Additions of 4-substituted phenylboronic acids containing substituents ranging from strongly electron-donating to strongly electron-withdrawing form ketones 2b-2g in 82-92% yield. Additions of a variety of 3substituted and 3,5-disubstituted phenylboronic acids form the corresponding ketones 2h-2l in high yields (81-90% yield). Additions of 2-substituted phenylboronic acids to β,βdisubstituted enones often occur in low yields with previously developed palladium catalyst and reaction systems.10b-c,11b However, additions of a range 2-substituted phenylboronic acids to 1a occur in the presence of 1-5 mol % catalyst when the reactions are conducted in aqueous NaTFA. These reactions form ketones 2m-2q containing ortho-substituted benzylic quaternary carbons in 35-87% yield. Additions of 2,6disubstituted phenylboronic acids to 1a did not occur to form the corresponding ketone products. Additions of phenylboronic acid to a variety of 3-substituted enones also occur in good to excellent yields (Scheme 3). The additions of phenylboronic acid to 3-ethylcyclohexenone and 3-isopropylcyclohexenone form ketones 2r (R = Et) and 2s (R = i-Pr) in 88% and 72% yield. Additions of phenylboronic acid to 5- and 7-membered enones also occur to form ketones containing benzylic quaternary carbons. The addition to 3methylcyclopentenone forms ketone 2t in 98% yield under our standard reaction conditions. The addition to 3methylcycloheptenone forms ketone 2u in 76% yield. However, 3-methylcycloheptenone is less reactive than the corresponding 5- and 6-membered ketones, and 2 mol % catalyst is required to drive this reaction toward completion. O

PhB(OH) 2 (1.2 equiv) Pd(TFA) 2 (1.0 mol %) 2,2!-bpy (1.2 mol %) 50 mM aq. NaTFA pH = 8.2, 100 °C

n R n = 0-2 1b: R = Et, n = 1 1c: R = i-Pr, n = 1 1d: R = CH3, n = 0 1e: R = CH3, n = 2

O Ph

Ph

Et 2r: 88%

O

i-Pr 2s:

Ph n R

72%b

2t: 98%

O 3

O

Ph

(1)

4 89% yield

The ability to form challenging ortho-substituted benzylic quaternary carbons through Pd-catalyzed conjugate additions of arylboronic acids led us to investigate whether our reaction system would enable the formation of bis-benzylic quaternary carbon centers. Formation of this class of quaternary carbon center by conjugate addition of aryl nucleophiles to cyclic βaryl enones typically requires air- and/or moisture-sensitive organometallic reagents.3c,13 To our knowledge, Pd-catalyzed additions of air- and moisture-stable arylboronic acids to cyclic β-aryl enones have not been reported.14 O Ar2 B(OH) 2 (4.0 equiv)

+ Ar1

O

Pd(TFA) 2 (5 mol %) 2,2!-bpy (6 mol %)

Ar2

50 mM aq. NaTFA pH = 8.2, 100 °C

Ar1 2v-2ab

1f: Ar1 = Ph 1g: Ar1 = 4-(H3C)C6H 4 1h: Ar1 = 4-H3COC6H 4 O

O

O

O

Cl

Cl Ph

Ph

Ph

Ph

2v: 74%

Ph

2w: 66%

O

2x: 54% O

2y: 66% O

Cl

CH3 Cl

Ph

2z: 66%

CH3

2aa: 74% OCH3

2ab: 72% OCH3

a Reaction conditions: 1f-1h (0.50 mmol), Ar2B(OH)2 (2.0 mmol), Pd(TFA)2 (0.025 mmol), 2,2ʹ′-bpy (0.030 mmol), 50 mM NaTFA (0.17 mL, pH = 8.2), 100 °C, 16-20 h. Isolated yields are reported after purification by flash column chromatography.

O Ph

Ph CH3

PhB(OH) 2 (1.2 equiv) Pd(TFA) 2 (1.0 mol %) 2,2!-bpy (1.2 mol %) 50 mM aq. NaTFA pH = 8.2, 100 °C

O

2r-u

O

example, the addition of phenylboronic acid to 4-methylpent3-en-2-one 3 occurs under our standard reaction conditions to form ketone 4 in 89% yield (eq 1).

CH3 2u: 76%b

a

Reaction conditions: 1b-1e (1.0 mmol), PhB(OH)2 (1.2 mmol), Pd(TFA)2 (0.010 mmol), 2,2ʹ′-bpy (0.012 mmol), 50 mM aq. NaTFA (0.33 mL, pH = 8.2), 100 °C, 16-24 h. Isolated yields are reported after purification by flash column chromatography. b Reaction run in the presence of 2.0 mol % Pd(TFA)2 and 2.4 mol % 2,2ʹ′-bpy with 2.0 equiv PhB(OH)2.

Scheme 3. Pd-Catalyzed Addition of PhB(OH)2 to Cyclic Enones 1b-1ea Our catalytic conditions also enable conjugate additions of arylboronic acids to acyclic β,β-disubstituted enones.12 For

Scheme 4. Pd-Catalyzed Addition of Arylboronic Acids to β-aryl Cyclohex-2-enones 1f-h.a Scheme 4 summarizes additions of a variety of arylboronic acids to cyclic β-aryl enones 1f-1h to form bis-benzylic quaternary carbon centers in aqueous media. These reactions form the β,β-diaryl ketone products 2v-2ab in moderate to good yields, but 5 mol % palladium catalyst and 4.0 equiv of the arylboronic acid are required. Additions of phenyl-, 4chlorophenyl-, and 3-chlorophenylboronic acids to 3phenylcyclohexenone 1f form ketones 2v-2x in 54-74% yield. In contrast, additions of electron-rich arylboronic acids to 1f occur in low yields due to protodeboronation. To address this issue, we incorporated the electron-rich aryl group (Ar1 = 4(H3C)C6H4 (1g) and 4-H3COC6H4 (1h)) into the 3-arylenone substrates. Additions of phenyl- and 4-chlorophenylboronic acid to enones 1g and 1h form the corresponding ketones 2y-

ACS Paragon Plus Environment

ACS Catalysis

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

2ab containing bis-benzylic quaternary carbons in 66-74% yield. Attempts to construct bis-benzylic quaternary centers containing an ortho-substituted aryl group by addition of ortho-substituted arylboronic acids to enone 1f led to low yields of the ketone products.15 We have demonstrated that a catalytic, enantioselective addition of phenylboronic acid to enone 1a occurs in high yield with good enantioselectivity under our aqueous reaction conditions. This reaction occurs in the presence of a chiral, nonracemic catalyst generated from 1.0 mol % Pd(TFA)2 and 1.2 mol % pyridinooxazoline ligand L1 to form ketone 2a in 86% yield with 71% ee (eq 2). To our knowledge, this reaction represents the first enantioselective example of conjugate addition to form a benzylic, all-carbon quaternary center under completely aqueous conditions. O

CH3 1a

PhB(OH) 2 (1.2 equiv) Pd(TFA) 2 (1.0 mol %) L1 (1.2 mol %) 50 mM aq. NaTFA pH = 8.2, 40 °C

L1 =

O

N

O Ph (2) 2a

CH3

86% yield 71% ee

N t-Bu

In summary, we have developed a set of catalytic reaction conditions for palladium-catalyzed conjugate addition of arylboronic acids to β,β-disubstituted enones in aqueous media. Additions of a wide range of arylboronic acids to β,βdisubstituted enones occur to form ketone products bearing benzylic all-carbon quaternary centers in moderate to high yields. The use of aqueous NaTFA as the reaction medium significantly enhances reactivity and enables the formation of challenging bis-benzylic and ortho-substituted benzylic quaternary centers. Studies to develop enantioselective, Pdcatalyzed conjugate additions to set bis-benzylic quaternary carbon stereocenters in aqueous media are ongoing in our laboratory.

ASSOCIATED CONTENT Supporting Information. Experimental procedures and characterization data for all new compounds. This material is available free of charge via the internet at http://pubs.acs.org.

AUTHOR INFORMATION Corresponding Author *E-mail: [email protected]

ACKNOWLEDGMENT We thank Iowa State University and the Iowa State University Center for Catalysis for financial support of this work.

ABBREVIATIONS Pd(TFA)2, palladium trifluoroacetate; 2,2′-bpy, 2,2′-bipyridine; NaTFA, sodium trifluoroacetate; Pyox, pyridinooxazoline; Box, bisoxazoline; Pd(OAc)2, palladium acetate; NaOAc, sodium acetate.

Page 4 of 5

(1) Liu, Y.; Han, S. -J.; Liu, W. -B.; Stoltz, B. M. Acc. Chem. Res. 2015, 48, 740-751. (2) Imbery, U.; Nguyen, A. T.; Nickisch, K.; Westerman, J. Eur. J. Inorg. Chem. 1998, 295-298. (3) (a) May, T. L.; Brown, M. K.; Hoveyda, A. H. Angew. Chem. Int. Ed. 2008, 47, 7358-7362. (b) Hawner, C.; Kangying, L.; Cirriez, V.; Alexakis, A. Angew. Chem. Int. Ed. 2008, 47, 8211-8214. (c) Dabrowski, J. A.; Villaume, M. T.; Hoveyda, A. H. Angew. Chem. Int. Ed. 2013, 52, 8156-8159. (4) (a) Martin, D.; Kehrli, S.; d’Augustin, M.; Clavier, H.; Mauduit, M.; Alexakis, A. J. Am. Chem. Soc. 2006, 128, 8416-8417. (b) Kehrli, S.; Martin, D.; Rix, D.; Mauduit, M.; Alexakis, A. Chem. Eur. J. 2010, 16, 9890-9904. (5) (a) Lee, K. -S.; Brown, M. K.; Hird, A. W.; Hoveyda, A. H. J. Am. Chem. Soc. 2006, 128, 7182-7184. (b) Brown, M. K.; May, T. L.; Baxter, C. A.; Hoveyda, A. H. Angew. Chem. Int. Ed. 2007, 46, 1097-1100. (6) Tsutsumi, Y.; Nagaosa, M.; Nishimura, T.; Shintani, R.; Hayashi, T. J. Am. Chem. Soc. 2009, 131, 13588-13589. (7) (a) Takeda, M.; Nishimura, T.; Shintani, R.; Hayashi, T. Angew. Chem. Int. Ed. 2010, 49, 3969-3971. (b) Jordan-Hore, J. A.; Sanderson, J. N.; Lee, A. -L. Org. Lett. 2012, 14, 25082511. (8) Hahn, B. T.; Tewes, F.; Fröhlich, R.; Glorius, F. Angew. Chem. Int. Ed. 2010, 49, 1143-1146. (9) (a) Lin, S.; Lu, X. Org. Lett. 2010, 12, 2536-2539. (b) Gottumukkala, A. L.; Suljagic, J.; Matcha, K.; de Vries, J. G.; Minnaard, A. J. ChemSusChem. 2013, 6, 1636-1639. (10) (a) Kikushima, K.; Holder, J. C.; Gatti, M.; Stoltz, B. M. J. Am. Chem. Soc. 2011, 133, 6902-6905. (b) Holder, J. C.; Goodman, E. D.; Kikushima, K.; Gatti, M.; Marziale, A. N.; Stoltz, B. M. Tetrahedron. 2015, 71, 5781-5792.. (c) Holder, J. C.; Zou, L.; Marziale, A. N.; Liu, P.; Gatti, M.; Kikushima, K.; Houk, K. N.; Stoltz, B. M. J. Am. Chem. Soc. 2013, 135, 14996-15007. (d) Shockley, S. E.; Holder, J. C.; Stoltz, B. M. Org. Lett. 2014, 16, 6362-6365. (e) Boeser, C. L.; Holder, J. C.; Taylor, B. L. H.; Houk, K. N.; Stoltz, B. M.; Zare, R. N. Chem. Sci. 2015, 6, 1917-1922. (f) Li, L.-Q.; Li, M.-M.; Chen, D.; Liu, H.-M.; Geng, H.-C.; Lin, J.; Qin, H.-B. Tetrahedron Lett. 2014, 55, 5960-5962. (11) (a) Gottumukkala, A. L.; Matcha, K.; Lutz, M.; de Vries, J. G.; Minnaard, A. J. Chem. Eur. J. 2012, 18, 6907-6914. (b) Buter, J.; Moezelaar, R.; Minnaard, A. J. Org. Biomol. Chem. 2014, 12, 5883-5890. (12) For related studies to form β-, γ-, and δ-substituted acyclic ketones see: (a) Mei, T.-S.; Patel, H. H.; Sigman, M. S. Nature, 2014, 508, 340-344. (b) Mei, T.-S.; Werner, E. W.; Burckle, A. J.; Sigman, M. S.; J. Am. Chem. Soc. 2013, 135, 68306833. (c) Werner, E. W.; Mei, T.-S.; Burckle, A. J.; Sigman, M. S. Science, 2012, 338, 1455-1458. (d) Patel, H. H.; Sigman, M. S. J. Am. Chem. Soc. 2015, 137, 3462-3465. (e) Hilton, M. J.; Xu, L.-P.; Norrby, P.-O.; Wu, Y.-D.; Wiest, O.; Sigman, M. S. J. Org. Chem. 2014, 79, 11841-11850. (13) Nesterov, E. E.; Zimmerman, H. E. J. Am. Chem. Soc. 2003, 125, 5422-5430 (14) Additions of phenylboronic acid to β-aryl- and βheteroarylcyclohexenones formed trace ketone product or no conversion when the reactions were conducted in the presence of a catalyst prepared from Pd(TFA)2 and a pyridinooxazoline ligand. See reference 10b for details. (15) As an example, the addition of ortho-fluorophenylboronic acid to 3-phenylcyclohexenone occurs under the reaction conditions illustrated in Scheme 4 to form the corresponding ketone product in 27% yield by 1H NMR analysis.

REFERENCES

ACS Paragon Plus Environment

Page 5 of 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Catalysis

R2 B(OH) 2

O

n R n = 0-2

1

Pd(II) catalyst (1-5 mol %) aq. NaTFA 100 °C

R1 = alkyl or aryl

O

R2

bis-benzylic all-carbon quaternary centers O

n R1 up to 99% yield

ACS Paragon Plus Environment

Cl 72% yield

OMe

5