Subscriber access provided by University of Florida | Smathers Libraries
Article
Polydopamine-coated magnetic molecularly imprinted polymers with fragment template for identification of Pulsatilla saponins metabolites in rat feces with UPLC-Q-TOF-MS Yuzhen Zhang, Jia-Wei Zhang, Chong-Zhi Wang, Lian-Di Zhou, qihui zhang, and Chun-Su Yuan J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.7b05747 • Publication Date (Web): 20 Dec 2017 Downloaded from http://pubs.acs.org on December 20, 2017
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 35
Journal of Agricultural and Food Chemistry
Polydopamine-coated magnetic molecularly imprinted polymers with fragment
template
for
identification
of
Pulsatilla
saponins
metabolites in rat feces with UPLC-Q-TOF-MS Yu-Zhen Zhang1, Jia-Wei Zhang1, Chong-Zhi Wang3, Lian-Di Zhou2,*, Qi-Hui Zhang1, 3,*, Chun-Su Yuan3
1
School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044,
China; 2
Basic Medical College, Chongqing Medical University, Chongqing 400016, China;
3
Tang Center for Herbal Medicine Research and Department of Anesthesia & Critical Care,
University of Chicago, Chicago, IL 60637, U.S.A..
*Correspondence: 1* E-mail:
[email protected] (Q.H. Zhang), Fax: (+86)-023-65102531; 2* E-mail:
[email protected] (D.L. Zhou), Fax: (+86)-023-65714434.
1
ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
ABSTRACT 1
In this work, a modified pretreatment method using magnetic molecularly
2
imprinted polymers (MMIPs) was successfully applied to study the metabolites of an
3
important botanical with ultra-performance liquid chromatography/quadrupole time-
4
of-flight mass spectrometry (UPLC-Q-TOF-MS). The MMIPs for glucoside-specific
5
adsorption was used to identify metabolites of Pulsatilla chinensis in rat feces.
6
Polymers were prepared by using Fe3O4 nanoparticles as the supporting matrix, D-
7
glucose as fragment template and dopamine as the functional monomer and cross-
8
linker. Results showed that MMIPs exhibited excellent extraction performance, large
9
adsorption capacity (5.65 mg/g), fast kinetics (60 min) and magnetic separation.
10
Furthermore, the MMIPs coupled with UPLC-Q-TOF-MS were successfully utilized
11
for the identification of 17 compounds including 15 metabolites from the Pulsatilla
12
saponin metabolic pool. This study provides a reliable protocol for the separation and
13
identification of saponin metabolites in a complex biological sample, including those
14
from herbal medicines.
15
Keywords: Magnetic molecularly imprinted polymers; Metabolites study; P. chinensis;
16
Fragment template.
2
ACS Paragon Plus Environment
Page 2 of 35
Page 3 of 35
Journal of Agricultural and Food Chemistry
1. Introduction 17
Pulsatilla chinensis (Bunge) Regel is a medical and edible botanical, which has
18
been used for thousands of years in Asia. Ever-dwindling numbers of the wild plant
19
has forced the price of P. chinensis higher and higher, with the shortage replaced
20
through artificial cultivation.1 As an edible tonic tea, P. chinensis is widely consumed
21
alone or in combination with other botanicals for preventing viral infection.1,2 In
22
addition, P. chinensis is commonly used for treating intestinal amebiasis, malaria,
23
vaginal trichomoniasis, bacterial infections and malignant tumors.3,4 The triterpenoid
24
saponins have been demonstrated to be the main chemical constituents and major
25
active ingredients of P. chinensis.3 Anemoside B4 (AB4), the most important bioactive
26
triterpenoid saponin of P. chinensis, has been reported to possess anti-inflammatory
27
activity.5 It can significantly inhibit the proliferation of Hep G2 cells6 and has
28
prominent effects on the antitumor activities associated with cell proliferation,
29
apoptosis and oxidative stress.7,8
30
Recently, we reported the metabolic profile of AB4 associated with the microflora
31
in rat small and large intestines. Ten metabolites were detected and identified with
32
ultra-performance
33
spectrometry (UPLC-Q-TOF-MS).8 However, metabolic studies in complex
34
biological samples are still challenging analytically because of the low concentration
35
of analytes in complex biological matrices.9 Thus, developing powerful enrichment
36
and high selectivity techniques for the extraction of target components from complex
37
samples remains an important role.
liquid
chromatography/quadrupole
time-of-flight
mass
38
Molecularly imprinted polymers (MIPs), with three dimensional complementary
39
cavities engineered through templates, has attracted great attention in the fields of 3
ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
40
complex matrices,10-13 drug delivery,9,14,15 biosensor,16-18 selective photocatalytic
41
degradation19,20 and chromatographic separation.21,22 Furthermore, magnetic surface
42
imprinted materials can be rapidly and conveniently separated from sample under
43
external magnetic fields without centrifugation or filtration procedures23 and can also
44
improve mass transfer and reduce permanent entrapment.24 Thus, the novel magnetic
45
MIPs (MMIPs) technique has widespread application in the pre-treatment of samples.
46
Dopamine (DA) is a small-molecule mimicking adhesive proteins, which contains
47
catechol and amine functional groups. At a weak alkaline pH, it can produce an
48
adherent polydopamine (PDA) by self-polymerization.25 Recently, it has been
49
reported that the self-polymerization of the functional monomer dopamine is used in
50
the preparation of imprinted nanoparticles.26,27 Thus, we innovatively developed a
51
facile, simple and green approach to imprint templates on the surface coating of
52
magnetic nanoparticles with a thin layer of PDA polymers.
53
However, some template molecules, such as purified natural products, are so
54
expensive that they limit the application of the MMIPs technique. Imprinted polymers
55
prepared with fragment templates (partial structures of templates) could solve the
56
problem of these expensive and rare templates.13 Moreover, MMIPs using fragment
57
templates can avoid template leakage28 and adsorb a number of active ingredients.29
58
Thus, it is of importance to extract the saponin metabolites of Pulsatilla and generate
59
comprehensive metabolite information.
60
Herein, we describe the synthesis of MMIPs based PDA polymer using candidate
61
fragment templates, which derive from the four components of AB4, D-glucose, L-
62
rhamnose, L-arabinose and oleanolic acid. In addition, we describe the application of
63
MMIPs in the isolation of metabolites of triterpenoid saponins in rat feces after oral
64
administration of P. chinensis. In this present study, we incorporate aspects of green 4
ACS Paragon Plus Environment
Page 4 of 35
Page 5 of 35
Journal of Agricultural and Food Chemistry
65
chemistry in the synthesis of MMIPs and determine the suitability and sensitivity of
66
our technique as a new option for identifying metabolites from a metabolic pool in
67
complex biological systems.
2. Materials and methods 2.1. Chemicals and reagents 68
Anemoside B4 standard (>98%) was obtained from Sichuan Vic's Biological
69
Technology Co., Ltd (Sichuan, China). D-glucose, L-rhamnose, L-arabinose, oleanolic
70
acid and dopamine hydrochloride (DA·HCl) were acquired from Adamas Reagent Co.,
71
Ltd (Basel, Switzerland). Iron (III) chloride hexahydrate (FeCl3·6H2O), sodium
72
acetate
73
(Na3C6H5O7·2H2O), hydrochloric acid (HCl), methanol (MeOH), anhydrous ethanol
74
(EtOH) and acetic acid (AcOH) were purchased from Chengdu ke Long chemical
75
reagent factory (Chengdu, China). Acetonitrile (ACN) and formic acid of HPLC grade
76
were from Merck (Darmstadt, Germany). The ultrapure water used in experiments
77
was prepared by a Milli-Q system (Millipore, Milford, MA, USA). Other reagents
78
were of analytical grade.
anhydrous
(NaAc),
ethylene
glycol
(CH2OH)2,
sodium
citrate
2.2. Instruments 79
Scanning electron microscope (SEM) and Transmission electron microscopy (TEM)
80
images were adopted by merlin compact (ZEISS, Germany) and JEM 2100F (JEOL,
81
Japan). FT-IR spectra were obtained by an IR Affinity-1 Fourier Transform Near IR
82
spectrometer (Shimadzu, Japan). The thermo gravimetric analysis was performed by
83
TGA/DSL1/1600LF (Mettler Toledo, Switzerland). UPLC analysis was carried out on
84
a Nexera UPLC LC-30A system (Shimadzu, Kyoto, Japan) equipped with a binary
85
pump, an online degasser, an autoinjector and a thermostatically controlled column 5
ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
86
compartment. The Agilent Zorbax Eclipse plus C18 column (2.1×100 mm, 1.8 μm)
87
was used for chromatographic separation. 2.3. Synthesis of MMIPs nanoparticles
88
The synthetic routine of MMIPs is shown in Figure 1. First, magnetic Fe3O4
89
nanoparticles (Fe3O4 NPs) were synthesized by solvothermal method. Typically, 1.35
90
g of FeCl3·6H2O were dissolved in 40 mL of ethylene glycol and magnetically stirred
91
at room temperature until forming a clear solution. Subsequently, 3.1 g of sodium
92
acetate anhydrous and 0.4 g of sodium citrate were added. After that, the mixtures
93
were vigorously stirred at 150 °C for 30 min, and then the homogeneous black
94
solution was transferred to a Teflon-lined stainless steel autoclave. The autoclave was
95
maintained at 200 °C for 8 h. Finally, the obtained black materials were rinsed with
96
anhydrous ethanol and ultrapure water, and then dried under vacuum at 50 °C for 8 h.
97
After that, 75 mg of synthesized magnetic nanoparticles were dispersed into 30 mL
98
of Tris–HCl buffer solution (pH=8.5, 10 mM) under ultrasonic vibration. Then 75 mg
99
of D-glucose was added and the mixture solution was shaken at room temperature for
100
30 min, followed by the addition of 75 mg of DA·HCl. The resulting mixtures were
101
reacted by self-polymerization in the dark and mechanically stirred at room
102
temperature for 12 h. The harvested products were collected using a magnet and
103
washed with acetonitrile-acetic acid (9:1, v/v) several times to remove D-glucose and
104
then dried under vacuum for further use. As a control, the corresponding MNIPs were
105
prepared in the identical manner without of D-glucose. 2.4. Adsorption experiments
106 107
The adsorption capacity of MMIPs/MNIPs was evaluated using AB4, as the test compound.
6
ACS Paragon Plus Environment
Page 6 of 35
Page 7 of 35
Journal of Agricultural and Food Chemistry
108
The static adsorption experiments were carried out at 30 °C. 15 mg of
109
MMIPs/MNIPs were added to 3 mL of different concentrations (10 µg/mL-100
110
µg/mL) of AB4, which dissolved in Tris–HCl buffer solution (pH=8.5, 10 mM). Then,
111
the solution was shaken on an oscillator at 90 rmp for 4 h. The adsorption capacity of
112
MMIPs/MNIPs (Q, mg/g) was calculated based on following equation:
113
Q = (C0-Ce) · V/m
114
Where C0 (μg/mL) is the concentration of the initial solution, Ce (μg/mL) is the
115
equilibrium concentration of AB4 solution, V (mL) is the volume of AB4 solution, and
116
m means the mass of MIPs/NIPs (mg).
117
To further estimate the adsorption capacity of MMIPs/MNIPs, kinetic adsorption
118
experiments were also done at 30 °C. 15 mg of MMIPs/MNIPs were mixed with 3 mL
119
of 80 µg/mL Tris–HCl (pH=8.5, 10 mM) AB4 solution. Afterwards, the mixtures were
120
shaken on an oscillator at 90 rmp for 5, 10, 20, 30, 40, 60 and 90 min. The
121
equilibrium adsorption capacity of MMIPs/MNIPs (Q, mg/g) at different times was
122
calculated with the following equation:
123 124
Q = (C0-Ct) · V/m Here, Ct (μg/mL) is equilibrium concentration of AB4 solution at different times. 2.5. UPLC-MS analysis
125
UPLC analysis was operated on a Nexera UPLC-LC-30A system (Shimadzu,
126
Kyoto, Japan). Chromatographic separation was carried out on an Agilent Zorbax
127
Eclipse plus C18 column (2.1×100 mm, 1.8 μm) with flow rate of 0.3 mL/min at 30 °C.
128
Gradient mobile phase consisted of A ( 0.1% formic acid in water ) and B ( 0.1%
129
formic acid in acetonitrile ) was as follows: 10–25% B at 0–2 min, 25–70% B at 3–20
130
min, 70–95% B at 21–25 min, 95–95% B at 26–27 min, 95-10% B at 28–30 min. The
131
sample volume injected was set at 2 μL, while spectra were acquired at 203 nm. 7
ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
132
Electrospray ionization (ESI) source was used for the ionization on AB Sciex
133
Triple TOF™ 5600+ system. The following MS/MS conditions were optimized as
134
follows: ion spray voltage, 4.5 kV; the turbo spray temperature, 550 °C; collision
135
energy, -55 eV. The scan range of m/z 100-1500 was chosen in negative modes.
136
Nitrogen was used as the nebulizer gas, and the nebulizer gas (gas 1) and the heater
137
gas (gas 2) were set to 60 and 60 ips, respectively. A real time multiple mass defect
138
filter and dynamic background subtraction performed on AB Sciex software
139
(Analyst® TF 1.6 software), which was used to screen the profile and provide a whole
140
production scan to avoid the omission of minor metabolites. In addition, an automated
141
calibration delivery system was used to regulate MS and MS/MS behavior in the
142
experiment. Data were evaluated by PeakView™ 1.2 and Metabolite Pilot™ 1.5
143
software (AB Sciex, Foster City, CA, USA). The theoretical mass tolerance was set at
144
the mass accuracy of