Position Accuracy of Gold Nanoparticles on DNA Origami Structures

Mar 2, 2018 - Phone: +498921801460., *E-mail: [email protected]. ... Small-angle X-ray scattering (SAXS) is suited to probe distances of nano-objects w...
4 downloads 0 Views 782KB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

Communication

Position Accuracy of Gold Nanoparticles on DNA Origami Structures Studied with Small-angle X-ray Scattering Caroline Hartl, Kilian Frank, Heinz Amenitsch, Stefan Fischer, Tim Liedl, and Bert Nickel Nano Lett., Just Accepted Manuscript • DOI: 10.1021/acs.nanolett.8b00412 • Publication Date (Web): 02 Mar 2018 Downloaded from http://pubs.acs.org on March 3, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Nano Letters is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

Position Accuracy of Gold Nanoparticles on DNA Origami Structures Studied with Small-angle X-ray Scattering Caroline Hartl1, Kilian Frank1, Heinz Amenitsch2, Stefan Fischer1, Tim Liedl1*, Bert Nickel1* 1

Faculty of Physics and Center for Nanoscience (CeNS), Ludwig-Maximilians-Universität, Geschwister-Scholl-Platz 1, 80539 München, Germany

2

Institute of Inorganic Chemistry, Graz University of Technology, Stremayrgasse 9, 8010 Graz, Austria

*

E-Mail: [email protected] (Phone: +498921801460); [email protected] (Phone: +498921803725)

ABSTRACT. DNA origami objects allow for accurate positioning of guest molecules in three dimensions. Validation and understanding of design strategies for particle attachment as well as analysis of specific particle arrangements are desirable. Small-angle X-ray scattering (SAXS) is suited to probe distances of nano-objects with sub-nanometer resolution at physiologically relevant conditions including pH and salt, and at varying temperatures. Here we show that the pair density distribution function (PDDF) obtained from an indirect Fourier transform of SAXS intensities in a model-free way allows to investigate prototypical DNA origami-mediated gold nanoparticle (AuNP) assemblies. We analyze the structure of three AuNP-dimers on a DNA

ACS Paragon Plus Environment

1

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 21

origami block, an AuNP trimer constituted by those dimers, and a helical arrangement of nine AuNPs on a DNA origami cylinder. For the dimers, we compare the model-free PDDF and explicit modeling of the SAXS intensity data by superposition of scattering intensities of the scattering objects. The PDDF of the trimer is verified to be a superposition of its dimeric contributions, i.e. here AuNP-DNA origami assemblies were used as test boards underlining the validity of the PDDF analysis beyond pairs of AuNPs. We obtain information about AuNP distances with an uncertainty margin of 1.2 nm. This readout accuracy in turn can be used for high precision placement of AuNP by careful design of the AuNP attachment sites on the DNAstructure and by fine-tuning of the connector types.

KEYWORDS. DNA nanotechnology, DNA origami, gold nanoparticle attachment, small-angle X-ray scattering

Bottom-up assembly enables the production of large numbers of identical structures at once. DNA based self-assembly is a versatile and powerful approach to nanoscale manufacturing in bulk.1-3 In particular the design principle of DNA origami has proven to be easily controllable, versatile and robust.4, 5 It relies on folding of a long circular single stranded DNA scaffold into various 2D- and 3D shapes by short single stranded staple oligonucleotides via base pairing interactions. One of the most prominent features of DNA assemblies is the possibility to place and control guest molecules and particles with high precision.6-22 Guest molecules can be attached and site-specifically arranged on the structures by selection and elongation of a certain set of oligonucleotides pointing outward from the structure. This allows for positioning of any guest molecule that can be attached to a complementary DNA-strand. DNA self-assembly has

ACS Paragon Plus Environment

2

Page 3 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

proven particularly useful for the spatial arrangement of metal nanoparticles into nanoantennae or more complex architectures for nanophotonic studies.23-27 Up to date, however, the positioning accuracy of particles on DNA origami structures has not been studied systematically. The success of DNA assemblies is often verified using imaging techniques such as AFM4 or TEM5. These techniques yield qualitative information about success of assembly and attachment, and first estimates on distances of the attached guest molecules. AFM is ideally suited to study relatively flat objects, however, particle attachments on origami structures are not rigid enough to allow for accurate localization under liquid conditions. Drying of the samples on the other hand results in significant distortion of the particle arrangements, both in AFM and TEM. Cryoelectron microscopy can even reveal atomic details of the nanostructures but requires freezing of the samples, which inhibits the observation of dynamic processes.28

Fluorescence lifetime

techniques have been used to analyze the influence of DNA–binding strategies on the attachment distance of large AuNPs to DNA origami.29 For observing relative changes in distances, Förster resonance energy transfer (FRET) of attached dye pairs is highly sensitive in the range of 1-10 nm.18,

30, 31

To obtain absolute values, however, FRET can be cumbersome as it relies on

fluorescent intensity yields, which are susceptible to solvent conditions and the chemical surrounding of the dyes. SAXS is a complementary method for structure analysis of nano-objects and in particular for measurements of pair distances of AuNP arrangements in solution.32 It is widely used for structure determination of biomolecules such as proteins.33 Furthermore, it can be used to verify the assembly of pure DNA-nanostructures.34,

35

We previously have performed SAXS

measurements on undecorated single origami nanostructures to reveal their inner structure and behavior with changing concentrations of ions.36 SAXS has also been used to characterize DNA-

ACS Paragon Plus Environment

3

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 21

connected AuNP dimers for investigation of the connector.32, 37-39 The pair density distribution function (PDDF) is obtained by indirect Fourier transform of the scattering data and serves as a tool for investigation of these structures.34, 37, 38, 40, 41 In the context of DNA-AuNP assemblies, SAXS has been successfully used to characterize DNA-mediated gold nanoparticle DNAassemblies42 and lattices43, 44 or more specifically DNA origami mediated lattice assemblies45-48 and for verification of assembly of their components49. Here, we apply SAXS for structure determination of three prototypical gold decorated DNA origami nanostructures with increasing complexity: a dimer, a trimer, and a helix. AuNP pair distances of dimers and trimers in solution extracted with pair density distribution function (PDDF) analysis are in good agreement with the design estimates. The distances obtained from the PDDF agree with the values extracted from direct modeling of AuNP arrangements within 1.2 nm. We then use the PDDF to analyze design details of positioning of nanoparticles on DNA origami. We find that the attachment point position on the origami, the choice of the orientation of the DNA connector and the DNA length all influence the positioning. We see indications of repulsion between AuNP placed laterally next to each other, presumably due to their large DNA shell and their flexible connectors to the origami. Furthermore, the radius of a helical arrangement of nine nanoparticles can be obtained from the AuNP pair distances. The synchrotron SAXS intensities of the components used in the assembly, namely the origami block and the AuNPs, and their assemblies are shown in Figure 1. They are plotted as functions of the magnitude of the scattering vector  = 4/ sin with wavelength λ and scattering angle 2θ. The scattering intensities from the bare DNA origami structures, a block and a cylinder shape, are well known from previous measurements36 (i&ii). The AuNPs show the characteristic oscillations of spherical particles (iii), which allow us to measure their radius from

ACS Paragon Plus Environment

4

Page 5 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

model-based analysis of the scattering curve. At first glance, the scattering intensities from the AuNP dimers largely resemble the scattering of the single unbound AuNPs, since they are the dominating scattering objects in these assemblies due to their high electron density. A closer look, however, reveals characteristic interference effects at small q (iv), i.e. in the q range which



probes the AuNP nearest pair distances dNB via  =  . Similarly, the helical AuNP 

arrangement mediated by the origami cylinder modulates the intensities at small q (v) (data shifted for clarity). Before we analyze the SAXS data quantitatively we describe the design scheme in detail in order to define the estimated distance values for the AuNPs in the different constructs. To assemble the dimer, we attached DNA-functionalized gold nanoparticles of nominally 10 nm diameter to three different binding sites on block-shaped, three-layered DNA origami nanostructures18 (Figure 2a). The defined binding sites consist each of three single-stranded DNA extensions, which are protruding from the upper or lower surface of the block (marked red) in a triangular geometry. All protrusions have a length of 15 A-bases while the gold nanoparticles are functionalized with thiol-modified-oligonuleotides of 19 T-bases, which gives a single-stranded spacer of 4 nucleotides (nt), adding a certain degree of flexibility. Two binding sites are located on one side of the block, one at the center (A) and one at the edge (B), and one binding site at the middle of the other side of the block (C), enabling the formation of three different dimer pairs (AB, AC, BC). Attachment sites A and B are laterally displaced by a small and a large shift compared to C, respectively. For clarity, we call these arrangements lateral (AB), vertical (AC), and diagonal (BC). The distance between the A and B attachment points of the lateral arrangement corresponds to 63 basepairs (bp), i.e. we expect a AuNP distance of 21.4 nm for the AB dimer, accounting for

ACS Paragon Plus Environment

5

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 21

0.34 nm per bp50. In dimer AC and BC, the attachment sites are on opposing sides of the origami block, and laterally displaced by 4.8 nm and 16.7 nm for AC and BC, respectively. The thickness of the three layer DNA origami block is 7.7 nm

36

, while the radius of the AuNPs has been

determined from the SAXS data to be 4.2 nm. As a simple estimate we here calculate the connector length of the oligonucleotides binding the AuNP as 5.1 nm accounting for a distance equivalent to 0.34 nm per basepair for 15 bp. With this, we estimate AuNP distances of 27 nm and 31 nm for the vertical (AC) and diagonal (BC) dimer, respectively. Note that these distances are well beyond the standard range of FRET experiments. After we fabricate all three dimers (AB, AC, BC) and the trimer conformation (ABC) we employ TEM imaging (Figure 2b) confirming assembly of all four structures (Supplementary Note S1 and Supplementary Table S1). For distance measurements the TEM images are prescreened for top views and side views of the lateral AB and vertical AC and BC configurations, respectively. The average center-to-center distance for the lateral (AB) configuration is 21 with a standard deviation of 4 nm, which is in good agreement with the designed value of 21.4 nm. For the vertical and diagonal configuration AC and BC we find values of 25 ± 1 nm and 27 ± 2 nm which are slightly off the designestimated values of 27 nm and 31 nm. The TEM analysis confirms the successful assembly and gives first estimates on the distances of the AuNPs, but the orientation of the objects when landing and drying effects can have a large influence on the particle configuration on the grids. These drawbacks can be overcome by SAXS measurements in solution. We will see below that center-to-center distances obtained by TEM are systematically smaller than the SAXS values for full hydration conditions (Supplementary Note S2). We first analyze the SAXS data of the dimers as they exhibit the simplest geometry. First we used direct modeling to reproduce the scattering data (Supplementary Information S2). The most

ACS Paragon Plus Environment

6

Page 7 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

basic fit model (solid line in Figure 1c (iv)) considered only the superposition of the scattering amplitudes of two gold spheres, displaced by distance d, which was already sufficient to extract dimer distance values which lie in the expected range (Supplementary Table S1), however some fits did not converge. In order to refine the model, the origami block and the DNA shell of the functionalized AuNPs were included in the explicit modeling (dashed line). Now, AuNP distances could be extracted for all dimers. In the cases where both models converged, the agreement was better than 1 nm, while the full model yielded systematically slightly lower distances (Supplementary Table S1). Before we turn to the quantitative discussion of the distance values, we use the indirect Fourier transform of the scattering data obtained in a model-free way through the software package GIFT51. This software calculates the pair density distribution function (PDDF) p(r). The PDDF is a histogram of distances r which can be found inside the scattering object and   =    with the averaged self-convolution of the density distribution   = 〈  ∗  − 〉.

52-54

The

PDDF distribution for a pair of spheres is supposed to show two maxima.55 The first maximum is determined by the AuNP-sphere radius, the second maximum is determined by the center-tocenter distance (Supplementary Note S2). We find that all PDDFs of dimers show a second maximum at a different characteristic position for lateral, vertical and diagonal configuration (Figure 2b, solid line, dashed line, dash-dot line, respectively). For the lateral, vertical, and diagonal configurations, the maxima indicate distances of 23.1 nm, 26.9 nm and 30.2 nm, respectively. These values are in good agreement with the design values. Furthermore, we find that distances obtained from the second maximum position of the PDDF agree within 1.2 nm with the analysis of SAXS intensities by simple geometric shape models and trends are the same.

ACS Paragon Plus Environment

7

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 21

Thus, particle distances can be read off directly from the experimental PDDF (Supplementary Note S2). With the goal of investigating the influence of DNA design details, we collected SAXS intensities of the lateral and vertical dimers (AB & AC) using different connectors (Figure 2c). Particle attachment was performed in three different ways. The AuNP were conjugated to (i) T19 with thiol with a 6 carbon spacer at the 5´end, (ii) T8 with thiol with a 6 carbon spacer at the 5´end, and (iii) to T19 with thiol with a 3 carbon spacer at the 3’end (Figure 2c). The origami structures were prepared with protrusions of either A15 or A9 extending from 3´ends of 3 designated staple strands to capture the nanoparticles covered with T19 or T8 strands, respectively. We expect that attachment thus occurs via hybridization and the formation of 3 double strands of 15 and 8 bp in (i) and (ii). The third configuration (iii) is designed to form a 15 bp double strand in a so-called “zipper” configuration.29 Assembly of the different constructs was first confirmed using TEM (Figure 2d& e) followed by detailed SAXS studies. For the vertical dimers (AC) we find that the second maximum positions indicate the dimer distances, 26.9 nm, 21.8 nm and 23.1 nm for configuration i, ii, and iii, respectively (Figure 2d). This can be rationalized by the following geometrical arguments: The observation that the distance in configuration (i) is 5 nm larger than (ii) can be explained by the length difference of the connecting oligonucleotides. The zipper configuration (iii) might be expected to yield the smallest dimer distance by zipping the nanoparticles tightly to the DNA origami surface. One should consider, however, the effect of sterical hindrance by the single-stranded DNA shell, which is 11 nt larger for the zipper configuration (iii) than for configuration (ii). The sterical hindrance of long oligonucleotides and the T4 single stranded spacer may cause the larger binding distance of the zipper configuration (iii) compared to the T8 configuration (ii).

ACS Paragon Plus Environment

8

Page 9 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

For the lateral dimer (AB), we find that the second maximum positions indicating the distances vary slightly for the three connector types: 23.1 nm, 21.0 nm, 21.6 nm for configuration i, ii, and iii, respectively (Figure 2e). The measured distances of the lateral AB dimer with the shorter connectors (ii and iii) are close to the calculated attachment point distance of 21.4 nm. The long linker configuration (i) yields a 2 nm larger value for the center-to-center distance. We here want to estimate if at this distance an influence of repulsion due to the DNA-shell on the AuNPs can be expected: Analysis of SAXS measurements of the AuNP functionalized with (i), (ii), and (iii) using a core-shell model as approximation indicate an equal Au core size of 4.2 nm and the largest shell for T19 with the six carbon spacer and the smallest for T8 as expected (Supplementary Note S2). If the single stranded oligonucleotides covering the surface of the AuNP behaved as ideal polymer random coils, the DNA shells would be of the order of the Flory radius56 of 4 and 2 nm for T19 and T8, respectively.

However, as the configuration of

oligonucleotides attached with thiol via a carbon spacer on a curved and densely covered surface deviates from this picture, we expect a different behavior. In order to verify for dense particle functionalization with DNA, we performed UV/vis spectroscopy control measurements for selected samples. We find that the number of DNA oligonucleotides, e.g. of 10 nm AuNPs functionalized with T19, is on the order of ~ 80 strands per particle, yielding surface densities of ~ 0.2 strands per nm2 which is consistent with previously reported values57. At high surface densities, DNA is expected to adopt a “brush” configuration with oligonucleotides being stretched away from the surface.58, 59 Due to the rigid core of the AuNP, the remaining space in between two AuNP sitting next to each other in the AB configuration is only 13 nm. This length corresponds to about 26 nt in a stretched configuration.58 This implies that the 19 nt -long DNA strands covering the AuNPs would overlap and hence induce steric repulsion, while for AuNPs

ACS Paragon Plus Environment

9

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 21

covered with 8 nt-long DNA no repulsion would be expected. Indeed, we find an enlarged distance for the longest T19 connectors. For the shorter connectors (ii) and (iii) the particle separations are close to the nominal value. We assume that the shorter connector (iii) allows for less movement of the particles away from the attachment point. This explains a lower deviation of the AuNP distance from the attachment point distance due to repulsion in configuration (iii). The trend of larger AuNP distances for T19 (i) compared to T8 (ii) obtained here in full hydration is also observed for dried samples on TEM grids for the lateral AB as well as for the vertical AC configuration of the dimer. Finally, we turn to the question whether also assemblies with more than two AuNP yield meaningful PDDFs. This question is highly relevant in order to confirm that analysis of AuNPDNA assemblies with the model-free PDDF is possible by standard data processing based on the indirect Fourier transform. We find that the PDDF of the trimer arrangement is indeed a superposition of the three PDDFs obtained separately for the dimers (see Figure 2b). A disentanglement of the respective dimer distances is, however, difficult, since all dimer distances (AB, AC, BC) agree within a few nm, i.e. the trimer is similar to an equilateral triangle. We therefore turn to a construct that has more characteristic pair distances; a helical arrangement of nine AuNP attached to a cylinder-like 24 helix bundle origami21. The measured PDDF of the helical AuNP arrangement is shown in Figure 3a (black solid line). The experimental PDDF shows side maxima at various pair distances in a discrete helix (Figure 3b). The first and second side peak at 21.2 nm and 36.4 nm agree with the nearest and next nearest neighbor distances of AuNPs in the discrete helix design, shown in the schematic (Figure 3b) as purple and blue lines. With these neighbor distances, it is possible to estimate the radius of the helix to approximately R=18.4 nm assuming a pitch of 57 nm. This value is in good agreement with the design

ACS Paragon Plus Environment

10

Page 11 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

(Supplementary Note S3). At larger distances multiple peaks overlap in the PDDF. Here it is only possible to analyze the PDDF via comparison of the whole function with a simulated PDDF based on our structure model using a Monte Carlo approach (Figure 3a, dash-dot line, details can be found in Supplementary Information S2).60-62 The agreement of the experimental PDDF with the simulation is remarkably good considering the complexity of this assembly. Our data shows how SAXS can be used to investigate the placement precision capabilities of DNA origami. While DNA origami itself has fairly predictable spacing properties along the axis of DNA, the attachment of relatively large structures such as the AuNPs of 10 nm diameter used in this study requires multiple attachment strands, which adds further complexity. Here, SAXS measurements can provide distance information within an uncertainty range of 1.2 nm for fine tuning of object positioning by choosing, measuring and adjusting the connectors of the AuNPs to tailor the structures to fit the needs of the experiments. The presented measurements have been performed at a synchrotron facility but initial experiments performed on an in-house setup yielded consistent results. The PDDF analysis is applicable to simple particle systems, which is confirmed by comparison to direct modeling. For many component AuNP-origami objects such as AuNP helices it is possible to extract key design parameters such as the helix radius from characteristic next neighbor distances.

ACS Paragon Plus Environment

11

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 21

Figure 1. Sketches (a) and measured SAXS pattern (b) of the components: i) a three-layered origami block, ii) an origami cylinder of 24 helices, iii) gold nanoparticles of approximately 10 nm diameter, iv) a gold nanoparticle dimer mediated by the DNA origami block, v) and a helical arrangement of nanoparticles mediated by the origami cylinder. Fits are shown for a dimer model considering only the scattering of the gold nanoparticles (solid line) and of a model taking into account the origami block and DNA shells around the particles (iv dashed line) in a zoom-in (c).

ACS Paragon Plus Environment

12

Page 13 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

Figure 2. a) Sketch of the trimer ABC with nanoparticles at different attachment sites A, B and C of the origami block. b) PDDF obtained from the scattering of the dimers AB, AC and BC and trimer ABC (blue solid line, dashed line, dash-dot line and black solid line respectively) with nanoparticles at different attachment sites. TEM images of all 3 dimers and the trimer are shown. Positions of the second peak indicate the center-to- center distances of the gold nanoparticles. c) Scheme of the tested connector types: (i) A15 to T19 (blue), (ii) A9 to T8 (orange) and (iii) A15 to 3´ T19 (green, zipper configuration). d) & e) PDDF for each of the three different connector types for dimers AC (d) and AB (e) are shown together with corresponding TEM images.

ACS Paragon Plus Environment

13

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 21

Figure 3. a) PDDF of the helical arrangement (solid line) and by Monte Carlo simulation (dashdot line)(see also Supplementary Note S2). b) The distances (colored arrows in the scheme) occurring in the PDDF (colored squares) confirm a helical arrangement with an overall helical radius of approximately 18.4 nm.

ACS Paragon Plus Environment

14

Page 15 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

ASSOCIATED CONTENT Supporting Information. Assembly of DNA-AuNP nanostructures, SAXS-analysis with detailed fit parameters and model description, design details of DNA-AuNP nanostructures with sketch of geometry and oligonucleotide sequences. (PDF) AUTHOR INFORMATION Corresponding Authors *E-Mail: [email protected]. Phone: +498921803725. *E-Mail: [email protected]. Phone: +498921801460. Author Contributions C.H., S.F., T.L. and B.N. designed the research. C.H. prepared the assemblies. C.H., K.F., S.F., and B.N. performed the SAXS measurements and analyzed the data. K.F. programmed the models. K.F. and C.H. fitted the data. H.A. obtained the PDDF with the program GIFT. C.H. and K.F. prepared the figures. C.H. wrote the manuscript. All authors edited the manuscript. Conflict of interest: The authors declare no competing financial interest. ACKNOWLEDGMENT This work was supported by the ERC Starting Grant ORCA (GA No: 336440), by the DFG through the cluster of excellence Nanosystems Initiative Munich and the SFB1032 (Project A6, A7). This work benefitted from SasView software, originally developed by the DANSE project under NSF award DMR-0520547. ELETTRA Sincrotrone Trieste is acknowledged for providing

ACS Paragon Plus Environment

15

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 21

beamtime. We thank A. Heuer-Jungemann for assistance with the determination of oligonucleotide numbers on AuNPs.

ACS Paragon Plus Environment

16

Page 17 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

REFERENCES (1) Seeman, N. C. DNA in a material world, Nature 2003, 421, 427-431. (2) Seeman, N. C. An overview of structural DNA Nanotechnology, Mol Biotechnol 2007, 37, 246257. (3) Hong, F.; Zhang, F.; Liu, Y.; Yan, H. DNA Origami: Scaffolds for Creating Higher Order Structures, Chemical Reviews 2017. (4) Rothemund, P. W. K. Folding DNA to create nanoscale shapes and patterns, Nature 2006, 440, 297-302. (5) Douglas, S. M.; Dietz, H.; Liedl, T.; Hogberg, B.; Graf, F.; Shih, W. M. Self-assembly of DNA into nanoscale three-dimensional shapes, Nature 2009, 459, 414-418. (6) Alivisatos, A. P.; Johnsson, K. P.; Peng, X. G.; Wilson, T. E.; Loweth, C. J.; Bruchez, M. P.; Schultz, P. G. Organization of 'nanocrystal molecules' using DNA, Nature 1996, 382, 609-611. (7) Mirkin, C. A.; Letsinger, R. L.; Mucic, R. C.; Storhoff, J. J. A DNA-based method for rationally assembling nanoparticles into macroscopic materials, Nature 1996, 382, 607-609. (8) Zheng, J. W.; Constantinou, P. E.; Micheel, C.; Alivisatos, A. P.; Kiehl, R. A.; Seeman, N. C. Twodimensional nanoparticle arrays show the organizational power of robust DNA motifs, Nano Lett 2006, 6, 1502-1504. (9) Pinto, Y. Y.; Le, J. D.; Seeman, N. C.; Musier-Forsyth, K.; Taton, T. A.; Kiehl, R. A. Sequenceencoded self-assembly of multiple-nanocomponent arrays by 2D DNA scaffolding, Nano Lett 2005, 5, 2399-2402. (10) Lo, P. K.; Karam, P.; Aldaye, F. A.; McLaughlin, C. K.; Hamblin, G. D.; Cosa, G.; Sleiman, H. F. Loading and selective release of cargo in DNA nanotubes with longitudinal variation, Nat Chem 2010, 2, 319-328. (11) Li, H. Y.; Park, S. H.; Reif, J. H.; LaBean, T. H.; Yan, H. DNA-templated self-assembly of protein and nanoparticle linear arrays, J Am Chem Soc 2004, 126, 418-419. (12) Sharma, J.; Chhabra, R.; Liu, Y.; Ke, Y. G.; Yan, H. DNA-templated self-assembly of twodimensional and periodical gold nanoparticle arrays, Angew Chem Int Edit 2006, 45, 730-735. (13) Sharma, J.; Chhabra, R.; Andersen, C. S.; Gothelf, K. V.; Yan, H.; Liu, Y. Toward reliable gold nanoparticle patterning on self-assembled DNA nanoscaffold, J Am Chem Soc 2008, 130, 7820-+. (14) Pal, S.; Deng, Z. T.; Ding, B. Q.; Yan, H.; Liu, Y. DNA-Origami-Directed Self-Assembly of Discrete Silver-Nanoparticle Architectures, Angew Chem Int Edit 2010, 49, 2700-2704. (15) Ke, Y. G.; Sharma, J.; Liu, M. H.; Jahn, K.; Liu, Y.; Yan, H. Scaffolded DNA Origami of a DNA Tetrahedron Molecular Container, Nano Lett 2009, 9, 2445-2447. (16) Ding, B. Q.; Deng, Z. T.; Yan, H.; Cabrini, S.; Zuckermann, R. N.; Bokor, J. Gold Nanoparticle SelfSimilar Chain Structure Organized by DNA Origami, J Am Chem Soc 2010, 132, 3248-+. (17) Voigt, N. V.; Torring, T.; Rotaru, A.; Jacobsen, M. F.; Ravnsbaek, J. B.; Subramani, R.; Mamdouh, W.; Kjems, J.; Mokhir, A.; Besenbacher, F.; Gothelf, K. V. Single-molecule chemical reactions on DNA origami, Nat Nanotechnol 2010, 5, 200-203. (18) Stein, I. H.; Schuller, V.; Bohm, P.; Tinnefeld, P.; Liedl, T. Single-Molecule FRET Ruler Based on Rigid DNA Origami Blocks, Chemphyschem 2011, 12, 689-695. (19) Zhang, T.; Neumann, A.; Lindlau, J.; Wu, Y. Z.; Prarnanik, G.; Naydenov, B.; Jelezko, F.; Schuder, F.; Huber, S.; Huber, M.; Stehr, F.; Hogele, A.; Weil, T.; Liedl, T. DNA-Based Self-Assembly of Fluorescent Nanodiamonds, J Am Chem Soc 2015, 137, 9776-9779. (20) Schreiber, R.; Luong, N.; Fan, Z. Y.; Kuzyk, A.; Nickels, P. C.; Zhang, T.; Smith, D. M.; Yurke, B.; Kuang, W.; Govorov, A. O.; Liedl, T. Chiral plasmonic DNA nanostructures with switchable circular dichroism, Nat Commun 2013, 4.

ACS Paragon Plus Environment

17

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 21

(21) Kuzyk, A.; Schreiber, R.; Fan, Z. Y.; Pardatscher, G.; Roller, E. M.; Hogele, A.; Simmel, F. C.; Govorov, A. O.; Liedl, T. DNA-based self-assembly of chiral plasmonic nanostructures with tailored optical response, Nature 2012, 483, 311-314. (22) Funke, J. J.; Dietz, H. Placing molecules with Bohr radius resolution using DNA origami, Nat Nanotechnol 2016, 11, 47-52. (23) Lim, D. K.; Jeon, K. S.; Kim, H. M.; Nam, J. M.; Suh, Y. D. Nanogap-engineerable Raman-active nanodumbbells for single-molecule detection, Nat Mater 2010, 9, 60-67. (24) Acuna, G. P.; Moller, F. M.; Holzmeister, P.; Beater, S.; Lalkens, B.; Tinnefeld, P. Fluorescence Enhancement at Docking Sites of DNA-Directed Self-Assembled Nanoantennas, Science 2012, 338, 506510. (25) Kuhler, P.; Roller, E. M.; Schreiber, R.; Liedl, T.; Lohmuller, T.; Feldmann, J. Plasmonic DNAOrigami Nanoantennas for Surface-Enhanced Raman Spectroscopy, Nano Lett 2014, 14, 2914-2919. (26) Li, N.; Tittl, A.; Yue, S.; Giessen, H.; Song, C.; Ding, B. Q.; Liu, N. DNA-assembled bimetallic plasmonic nanosensors, Light-Sci Appl 2014, 3. (27) Urban, M. J.; Dutta, P. K.; Wang, P. F.; Duan, X. Y.; Shen, X. B.; Ding, B. Q.; Ke, Y. G.; Liu, N. Plasmonic Toroidal Metamolecules Assembled by DNA Origami, J Am Chem Soc 2016, 138, 5495-5498. (28) Bai, X. C.; Martin, T. G.; Scheres, S. H. W.; Dietz, H. Cryo-EM structure of a 3D DNA-origami object, P Natl Acad Sci USA 2012, 109, 20012-20017. (29) Vietz, C.; Lalkens, B.; Acuna, G. P.; Tinnefeld, P. Functionalizing large nanoparticles for small gaps in dimer nanoantennas, New J Phys 2016, 18. (30) Stryer, L.; Haugland, R. P. Energy Transfer - a Spectroscopic Ruler, P Natl Acad Sci USA 1967, 58, 719-&. (31) Ha, T. Single-molecule fluorescence resonance energy transfer, Methods 2001, 25, 78-86. (32) Mathew-Fenn, R. S.; Das, R.; Harbury, P. A. B. Remeasuring the double helix, Science 2008, 322, 446-449. (33) Koch, M. H.; Vachette, P.; Svergun, D. I. Small-angle scattering: a view on the properties, structures and structural changes of biological macromolecules in solution, Q Rev Biophys 2003, 36, 147227. (34) Oliveira, C. L. P.; Juul, S.; Jorgensen, H. L.; Knudsen, B.; Tordrup, D.; Oteri, F.; Falconi, M.; Koch, J.; Desideri, A.; Pedersen, J. S.; Andersen, F. F.; Knudsen, B. R. Structure of Nanoscale Truncated Octahedral DNA Cages: Variation of Single-Stranded Linker Regions and Influence on Assembly Yields, Acs Nano 2010, 4, 1367-1376. (35) Andersen, E. S.; Dong, M.; Nielsen, M. M.; Jahn, K.; Subramani, R.; Mamdouh, W.; Golas, M. M.; Sander, B.; Stark, H.; Oliveira, C. L. P.; Pedersen, J. S.; Birkedal, V.; Besenbacher, F.; Gothelf, K. V.; Kjems, J. Self-assembly of a nanoscale DNA box with a controllable lid, Nature 2009, 459, 73-U75. (36) Fischer, S.; Hartl, C.; Frank, K.; Radler, J. O.; Liedl, T.; Nickel, B. Shape and Interhelical Spacing of DNA Origami Nanostructures Studied by Small-Angle X-ray Scattering, Nano Lett 2016, 16, 4282-4287. (37) Mastroianni, A. J.; Sivak, D. A.; Geissler, P. L.; Alivisatos, A. P. Probing the Conformational Distributions of Subpersistence Length DNA, Biophys J 2009, 97, 1408-1417. (38) Hura, G. L.; Tsai, C. L.; Claridge, S. A.; Mendillo, M. L.; Smith, J. M.; Williams, G. J.; Mastroianni, A. J.; Alivisatos, A. P.; Putnam, C. D.; Kolodner, R. D.; Tainer, J. A. DNA conformations in mismatch repair probed in solution by X-ray scattering from gold nanocrystals, P Natl Acad Sci USA 2013, 110, 1730817313. (39) Chi, C.; Vargas-Lara, F.; Tkachenko, A. V.; Starr, F. W.; Gang, O. Internal structure of nanoparticle dimers linked by DNA, Acs Nano 2012, 6, 6793-802. (40) Svergun, D. I.; Koch, M. H. J. Small-angle scattering studies of biological macromolecules in solution, Rep Prog Phys 2003, 66, 1735-1782.

ACS Paragon Plus Environment

18

Page 19 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

(41) Allec, N.; Choi, M.; Yesupriya, N.; Szychowski, B.; White, M. R.; Kann, M. G.; Garcin, E. D.; Daniel, M. C.; Badano, A. Small-angle X-ray scattering method to characterize molecular interactions: Proof of concept, Sci Rep-Uk 2015, 5. (42) Mastroianni, A. J.; Claridge, S. A.; Alivisatos, A. P. Pyramidal and chiral groupings of gold nanocrystals assembled using DNA scaffolds, J Am Chem Soc 2009, 131, 8455-9. (43) Nykypanchuk, D.; Maye, M. M.; van der Lelie, D.; Gang, O. DNA-guided crystallization of colloidal nanoparticles, Nature 2008, 451, 549-552. (44) Park, S. Y.; Lytton-Jean, A. K. R.; Lee, B.; Weigand, S.; Schatz, G. C.; Mirkin, C. A. DNAprogrammable nanoparticle crystallization, Nature 2008, 451, 553-556. (45) Tian, Y.; Wang, T.; Liu, W. Y.; Xin, H. L.; Li, H. L.; Ke, Y. G.; Shih, W. M.; Gang, O. Prescribed nanoparticle cluster architectures and low-dimensional arrays built using octahedral DNA origami frames, Nat Nanotechnol 2015, 10, 637-+. (46) Tian, Y.; Zhang, Y. G.; Wang, T.; Xin, H. L. L.; Li, H. L.; Gang, O. Lattice engineering through nanoparticle-DNA frameworks, Nat Mater 2016, 15, 654-+. (47) Liu, W. Y.; Tagawa, M.; Xin, H. L. L.; Wang, T.; Emamy, H.; Li, H. L.; Yager, K. G.; Starr, F. W.; Tkachenko, A. V.; Gang, O. Diamond family of nanoparticle superlattices, Science 2016, 351, 582-586. (48) Zhang, T.; Hartl, C.; Fischer, S.; Frank, K.; Nickels, P.; Heuer-Jungemann, A.; Nickel, B.; Liedl, T. 3D DNA origami crystals, 2017, arXiv:1706.06965. arXiv.org e-Print archive. https://arxiv.org/abs/1706.06965 (accessed Jan 09, 2018). (49) Tian, C.; Cordeiro, M. A. L.; Lhermitte, J.; Xin, H. L.; Shani, L.; Liu, M.; Ma, C.; Yeshurun, Y.; DiMarzio, D.; Gang, O. Supra-Nanoparticle Functional Assemblies through Programmable Stacking, Acs Nano 2017, 11, 7036-7048. (50) Watson, J. D.; Crick, F. H. C. Molecular Structure of Nucleic Acids - a Structure for Deoxyribose Nucleic Acid, Nature 1953, 171, 737-738. (51) Bergmann, A.; Fritz, G.; Glatter, O. Solving the generalized indirect Fourier transformation (GIFT) by Boltzmann simplex simulated annealing (BSSA), J Appl Crystallogr 2000, 33, 1212-1216. (52) Glatter, O.; Kratky, O. Small angle X-ray scattering. Academic Press: London ; New York, 1982. (53) Putnam, C. D.; Hammel, M.; Hura, G. L.; Tainer, J. A. X-ray solution scattering (SAXS) combined with crystallography and computation: defining accurate macromolecular structures, conformations and assemblies in solution, Q Rev Biophys 2007, 40, 191-285. (54) Svergun, D. I.; Feĭgin, L. A.; Taylor, G. W. Structure analysis by small-angle x-ray and neutron scattering. Plenum Press: New York, 1987. (55) Glatter, O. Computation of Distance Distribution-Functions and Scattering Functions of Models for Small-Angle Scattering Experiments, Acta Phys Austriaca 1980, 52, 243-256. (56) Flory, P. Principles of Polymer Chemistry. Cornell University Press: Ithaca, N.Y, 1953. (57) Hill, H. D.; Millstone, J. E.; Banholzer, M. J.; Mirkin, C. A. The Role Radius of Curvature Plays in Thiolated Oligonucleotide Loading on Gold Nanoparticles, Acs Nano 2009, 3, 418-424. (58) Parak, W. J.; Pellegrino, T.; Micheel, C. M.; Gerion, D.; Williams, S. C.; Alivisatos, A. P. Conformation of oligonucleotides attached to gold nanocrystals probed by gel electrophoresis, Nano Lett 2003, 3, 33-36. (59) Falabella, J. B.; Cho, T. J.; Ripple, D. C.; Hackley, V. A.; Tarlov, M. J. Characterization of Gold Nanoparticles Modified with Single-Stranded DNA Using Analytical Ultracentrifugation and Dynamic Light Scattering, Langmuir 2010, 26, 12740-12747. (60) Hansen, S. Calculation of Small-Angle Scattering Profiles Using Monte-Carlo Simulation, J Appl Crystallogr 1990, 23, 344-346. (61) Henderson, S. J. Monte Carlo modeling of small-angle scattering data from non-interacting homogeneous and heterogeneous particles in solution, Biophys J 1996, 70, 1618-1627.

ACS Paragon Plus Environment

19

Nano Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 21

(62) McAlister, B. C.; Grady, B. P. Simulation of small-angle X-ray scattering from single-particle systems, J Appl Crystallogr 1998, 31, 594-599.

ACS Paragon Plus Environment

20

Page 21 of 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Nano Letters

For Table of Contents Only

ACS Paragon Plus Environment

21