Prevention of Cyanobacterial Blooms Using ... - ACS Publications

Sep 26, 2017 - threat to global water resources because blooming cyanobac- teria deplete oxygen and release cyanotoxins, which cause the mass death of...
0 downloads 0 Views 1MB Size
Subscriber access provided by UNIV OF UTAH

Article

Prevention of Cyanobacterial Blooms using Nanosilica: A Biomineralization-inspired Strategy Wei Xiong, Yiming Tang, Changyu Shao, Yueqi Zhao, Biao Jin, Tingting Huang, Ya'nan Miao, Lei Shu, Weimin Ma, Xurong Xu, and Ruikang Tang Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.7b02985 • Publication Date (Web): 26 Sep 2017 Downloaded from http://pubs.acs.org on September 26, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 32

Environmental Science & Technology

1

Prevention of Cyanobacterial Blooms using Nano-

2

silica: A Biomineralization-inspired Strategy

3

Wei Xiong,† Yiming Tang,‡ Changyu Shao,† Yueqi Zhao, †,§ Biao Jin, † Tingting Huang, ‡ Ya’nan

4

Miao, ‡ Lei Shu, †,§ Weimin Ma*,‡, Xurong Xu*,§ and Ruikang Tang*,†

5



6 7

Hangzhou 310027, China ‡

8 9 10

Center for Biomaterials and Biopathways, Department of Chemistry, Zhejiang University,

College of Life and Environmental Science, Shanghai Normal University, Shanghai 200234, China

§

Qiushi Academy for Advanced Studies, Zhejiang University, Hangzhou 310027, China

Keywords: cyanobacteria • bloom • silicification • nanoparticles • prevention

11

12

ABSTRACT: Cyanobacterial blooms represent a significant threat to global water resources

13

because blooming cyanobacteria deplete oxygen and release cyanotoxins, which cause the mass

14

death of aquatic organisms. In nature, a large biomass volume of cyanobacteria is a precondition

15

for a bloom, and the cyanobacteria buoyancy is a key parameter for inducing the dense

16

accumulation of cells on the water surface. Therefore, blooms will likely be curtailed if

17

buoyancy is inhibited. Inspired by diatoms with naturally generated silica shells, we found that

18

silica nanoparticles can be spontaneously incorporated onto cyanobacteria in the presence of

ACS Paragon Plus Environment

1

Environmental Science & Technology

Page 2 of 32

19

poly(diallyldimethyl-ammonium chloride), a cationic polyelectrolyte that can simulate

20

biosilicification proteins. The resulting cyanobacteria-SiO2 complexes can remain sedimentary in

21

water. This strategy significantly inhibited the photoautotrophic growth of the cyanobacteria and

22

decreased their biomass accumulation, which could effectively suppress harmful bloom events.

23

Consequently, several of the adverse consequences of cyanobacteria blooms in water bodies,

24

including oxygen consumption and microcystin release, were significantly alleviated. Based on

25

the above results, we propose that the silica nanoparticle treatment has the potential for use as an

26

efficient strategy for preventing cyanobacteria blooms.

27

INTRODUCTION

28

As primary photosynthetic microorganisms, cyanobacteria are found almost everywhere and

29

have a profound impact on the earth’s atmosphere and biosphere.1-3 However, cyanobacteria can

30

also reproduce exponentially and uncontrollably, and they die rapidly under certain conditions

31

such as virus infection,4,5 which is commonly referred to as a harmful cyanobacterial bloom.6,7

32

The frequency of blooms has increased in water bodies around the world.6,7 These blooms

33

produce cyanotoxins that can poison and cause the death of animals and humans,8-11 and more

34

importantly, the resulting anaerobic water induces the large-scale death of aerobic organisms,

35

threatens the safety of drinking water, and destroys aquatic ecosystems.12,13 For instance, a large-

36

scale cyanobacterial bloom in Taihu Lake (Jiangsu Province, China) led to a highly publicized

37

drinking water crisis in 2007 that affected more than five million people.7,13,14 To reduce and

38

hopefully avoid the potential risks associated with cyanobacteria blooms, several approaches

39

have been developed, such as the addition of toxic algaecides and flocculants.15,16 However,

40

these methods have significant disadvantages, such as secondary pollution, low biological

ACS Paragon Plus Environment

2

Page 3 of 32

Environmental Science & Technology

41

selectivity and adverse environmental impacts.17 Therefore, developing novel pathways for

42

avoiding cyanobacterial blooms represents a great challenge.

43

A cyanobacterial bloom is caused by variations in the vertical position of large volumes of

44

cyanobacterial biomass, which develops gradually and accumulates over a long time.18 In nature,

45

many cyanobacteria have intracellular gas vesicles that make the cells buoyant.19-21 The floating

46

characteristic is an important factor in the occurrence of cyanobacterial blooms because buoyant

47

cyanobacteria float upward to accumulate in dense surface blooms.19-21 Subsequently, their

48

accelerated death induced by rising temperatures and light intensities, which result in the large-

49

scale consumption of dissolved oxygen and the release of cyanotoxins when huge cyanobacterial

50

cells are hard to disperse within certain time and space.8-13 Therefore, the control of buoyant cells

51

is the key to preventing cyanobacterial blooms in advance. Compared with cyanobacteria,

52

diatoms can use their siliceous walls as a ballast to control water column position.22,23 Cell walls

53

made of silica (hydrated silicon dioxide) are called frustules.24 Inspired by diatoms, we

54

conceived that cyanobacteria could be encapsulated within silica to confer upon them diatom-

55

like features. It was also found that cyanobacteria with biosilica shells and green algae

56

aggregates induced by silicification have the tendency to sink to the bottom due to the increased

57

density.25,26 Compared with diatoms, the silica-adsorbed cyanobacteria cells can remain in a

58

sedimentary state, thereby inhibiting rapid cell growth and subsequent death and possibly

59

reducing the risks of blooms. However, one challenge is that cyanobacteria cannot inherently

60

generate silica walls. Previous biomineralization research has shown that silica formation by

61

diatoms is induced by polycationic peptides that contain polyamine.27,28 Recently, silicification

62

proteins and long-chain polyamines (LCPA) have been reported to mimic biosilification proteins

63

to induce silica precipitation in vitro.29-31 As a cationic polyelectrolyte containing positively

ACS Paragon Plus Environment

3

Environmental Science & Technology

Page 4 of 32

64

charged quaternary amines, poly(diallyldimethylammonium chloride) (PDADMAC) has been

65

successfully used to improve cell silicification abilities.25,26,32,33 Herein, we developed a feasible

66

one-step treatment method of directly incorporating silica nanoparticles onto cyanobacteria using

67

PDADMAC, and this approach can suppress cyanobacterial blooms via tactics that are analogous

68

to those in diatoms.

69

MATERIALS AND METHODS

70

Cyanobacterial cell culture. In the experiment, Microcystis flos-aquae was isolated from

71

Meiliang Bay, Taihu Lake, China (120º30′N, 31º27′E), a water body that has experienced an

72

increased frequency and intensity of major cyanobacterial blooms in warm seasons in recent

73

years. Microcystis flos-aquae cells were cultured at 30°C in a 500-mL reagent bottle (Schott

74

Duran) containing 400 mL of BG-11 cultivation medium,34 buffered with Tris-HCl (5 mM, pH

75

8.0) bubbled with 2% (v/v) CO2 in air (30 mL/min), and subjected to continuous illumination by

76

fluorescent lamps (40 µE·m-2·s-1) for 24 h (OD730=0.2-0.3). The chlorophyll a concentration was

77

determined spectrophotometrically in methanol.35,36

78

Silica-induced cell sedimentation. In the experiment, commercially available silica

79

nanoparticles (Ludox TM-40 colloidal silica, diameter (26±4) nm, 40 wt% suspension in water,

80

purchased from Sigma–Aldrich, Saint Louis, Missouri, USA) were diluted to 5 g/L in NaCl

81

solution (0.02 M). Aqueous NaCl solution (0.02 M) was also used to prepare a 1 g/L

82

poly(diallyldimethylammonium chloride) (PDADMAC, Mw