pyridin-2-amine (ARQ 092): An Orally Bioavailable ... - ACS Publications

Jun 15, 2016 - Seminars in Cancer Biology 2017 ,. Maximising the potential of AKT inhibitors as anti-cancer treatments. Jessica S. Brown , Udai Banerj...
0 downloads 11 Views 924KB Size
Subscriber access provided by UNIVERSITY OF KENTUCKY

Article

Discovery of 3-(3-(4-(1-Aminocyclobutyl)phenyl)-5-phenyl-3Himidazo[4,5-b]pyridin-2-yl)pyridin-2-amine (ARQ 092): An Orally Bioavailable, Selective, and Potent Allosteric AKT Inhibitor Jean-Marc Lapierre, Sudharshan Eathiraj, David Vensel, Yanbin Liu, Cathy O Bull, Susan Cornell-Kennon, Shin Iimura, Eugene W. Kelleher, Darin E. Kizer, Steffi Koerner, Sapna Makhija, Akihisa Matsuda, Magdi Moussa, Nivedita Namdev, Ronald E. Savage, Jeff Szwaya, Erika Volckova, Neil Westlund, Hui Wu, and Brian Schwartz J. Med. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jmedchem.6b00619 • Publication Date (Web): 15 Jun 2016 Downloaded from http://pubs.acs.org on June 18, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of Medicinal Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Discovery

of

3-(3-(4-(1-Aminocyclobutyl)phenyl)-5-phenyl-3H-imidazo[4,5-b]pyridin-2-

yl)pyridin-2-amine (ARQ 092): An Orally Bioavailable, Selective, and Potent Allosteric AKT Inhibitor Jean-Marc Lapierre*,†ǂ, Sudharshan Eathiraj†ǂ, David Vensel†, Yanbin Liu†, Cathy O. Bull†, Susan Cornell-Kennon†, Shin Iimura‡, Eugene W. Kelleher†, Darin E. Kizer†, Steffi Koerner†, Sapna Makhija†, Akihisa Matsuda‡, Magdi Moussa†, Nivedita Namdev†, Ronald E. Savage†, Jeff Szwaya†, Erika Volckova†, Neil Westlund†, Hui Wu†, and Brian Schwartz† †

ArQule Inc., One Wall Street, Burlington, MA, 01803



Daiichi Sankyo Co., Shinagawa R&D Center, 1-2-58, Hiromachi, Shinagawa-ku, Tokyo 140-

8710, Japan ǂ

Both co-authors contributed equally to the manuscript

Abstract The work in this paper describes the optimization of the 3-(3-phenyl-3H-imidazo[4,5-b]pyridin2-yl)pyridin-2-amine chemical series as potent, selective allosteric inhibitors of AKT kinases, leading to the discovery of ARQ 092 (21a). The co-crystal structure of compound 21a bound to full-length AKT1 confirmed the allosteric mode of inhibition of this chemical class and the role of the cyclobutylamine moiety. Compound 21a demonstrated high enzymatic potency against AKT1, AKT2 and AKT3, as well as potent cellular inhibition of AKT activation and the phosphorylation of the downstream target PRAS40. Compound 21a also served as a potent inhibitor of the AKT1-E17K mutant protein and inhibited tumor growth in a human xenograft mouse model of endometrial adenocarcinoma.

ACS Paragon Plus Environment

1

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 57

Introduction The AGC kinases AKT1, AKT2 and AKT3 are key mediators of the PI3K/AKT/mTOR signaling pathway, which promotes diverse physiological processes such as proliferation, migration, anti-apoptotic survival and protein synthesis.1 The activation of the PI3K/AKT/mTOR signaling network is commonly observed in several human cancers and can be induced through a variety of mechanisms, including the overexpression of upstream receptors, PI3KCA-activating mutations, the loss of PTEN function, and the overexpression or mutational activation of AKT.2 The serine/threonine AKT kinases represent a pivotal node connecting the PI3K and mTOR pathways, suggesting that AKT kinases are compelling targets for the treatment of human cancers and non-oncology pathologies. Multiple efforts have been made to discover small molecule inhibitors of AKT, including both allosteric inhibitors that target full-length AKT and ATP-competitive inhibitors that are designed to bind the ATP binding pocket of the catalytic domain.3 Allosteric inhibitors offer a unique advantage over ATP-competitive inhibitors, in that very high kinase selectivity can be achieved by targeting a distinct allosteric pocket in AKT formed by the pleckstrin homology (PH) and kinase domains. In contrast to allosteric inhibitors, which inhibit the phosphorylation of Thr308 and Ser473 in AKT, ATP-competitive inhibitors paradoxically induce the hyper-phosphorylation of these two regulatory sites in cells and in vivo; however, the clinical significance of this observation is not yet understood.4 We recently reported the pre-clinical characterization of ARQ 092 (21a)5, a highly selective, allosteric inhibitor of AKT.6 Compound 21a showed strong affinity for un-phosphorylated fulllength AKT1 and potently inhibited the phosphorylated form of full-length AKT isoforms. In a large panel of cell lines derived from various tumor types, 21a showed potent anti-proliferative activity in cell lines containing PIK3CA/PIK3R1 mutations compared to those with wild-type

ACS Paragon Plus Environment

2

Page 3 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

(wt) PIK3CA/PIK3R1 or PTEN loss. Moreover, 21a also exhibited strong anti-tumor activity in mouse xenograft models implanted with cell lines carrying a PIK3CA mutation and in a patientderived tumor mouse model harboring an AKT1-E17K activating mutation. Both animal studies demonstrated the desirable pharmacokinetic properties of 21a which is under investigation in clinical trials targeting advanced solid tumors and recurrent malignant lymphoma. Compound 21a is also being investigated for treatment of Proteus syndrome, a disease driven by AKT-E17K mutation.7 In our previous study, we demonstrated that optimizing activity against AKT1, AKT2 and AKT3 was critical to achieving cellular potency; however, the most potent benzamide analogs of the imidazo[4,5-b]pyridine series had very low exposure in the plasma and tumors in mouse xenograft models. Therefore, the final phase of the optimization was then focused on optimizing the pharmacokinetics and demonstrating in vivo activity in tumor xenografts. One critical optimization step in the early stage of discovery of this chemical series was the reduction to a methyl group (4a) from a 4-t-butyl group observed in the initial hit (4b), followed by the addition of a primary anime to the methyl group (6). These two small side-chain modifications significantly improved the biochemical potency of the compounds and incorporated the substituents necessary for further optimization. Compound 6 became the cornerstone from which an extensive optimization campaign was undertaken, part of which has been previously disclosed with a focus on substitutions at the 5- and 6-position of the imidazo[4,5-b]pyridine ring system, as well as the substitution of the benzylic amine amide.8 In this communication, we describe the additional structure-activity relationships (SARs) that led to the discovery of 21a, its characterization in vitro and in vivo and its binding mode based on the co-crystallization of 21a with AKT1. To probe the structural features associated with this

ACS Paragon Plus Environment

3

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 57

highly biologically active scaffold, we previously reported the screening and early optimization of a series of 3-(3-phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amines as potent AKT inhibitors.8 The SAR-guided optimization of the imidazo[4,5-b]pyridine series using in vitro and in vivo assessments yielded highly selective AKT inhibitors. In vivo characterization employed both pharmacokinetic and pharmacodynamic analyses, and the lead inhibitors demonstrated oral bioavailability in mice and were well tolerated, with robust inhibition of AKT activation, as well as downstream AKT signaling. The screening paradigm in our previous study used a biophysical thermal shift assay to identify binders of AKT19, followed by a biochemical assay using the unphosphorylated AKT1 protein to recapitulate the binding event measured by the thermal shift assay. This was achieved by pre-incubating the test compounds with the un-phosphorylated protein, followed by in situ activation. AKT activation entails the translocation of the protein to the cell membrane and the binding of the PH domain of AKT to phosphoinositides, upon which a conformational change permits the phosphorylation of Thr308 (for AKT1) in the activation loop by phosphoinositide-dependent kinase 1 (PDK1).10 The full activation of AKT is achieved when Ser473 (for AKT1) in the hydrophobic motif (HM) domain is phosphorylated by the mTORC2 complex.11 For the biochemical assay, un-phosphorylated full-length proteins (AKT1 (1-480), AKT2 (1-481) and AKT3 (1-479)) were pre-incubated with the test compounds, followed by the successive addition of the activating proteins PDK1 and MAPKAPK2 (a Ser473-phosphorylating kinase that replaces the mTORC2 complex), lipid vesicles, and ATP before addition of the substrate, biotinylated crosstide. The biochemical activities of the test compounds described in this work against the two activating kinases (PDK1 and MAPKAPK2) were determined to ascertain whether the observed AKT inhibition was due specifically to AKT binding.12

ACS Paragon Plus Environment

4

Page 5 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Additionally, the biochemical inhibition of full-length, pre-activated AKT1, AKT2 and AKT3 was probed for all compounds to further validate the inhibitory potency.13 Synthesis From commercially available 2-chloro-3-nitropyridine (1a) and substituted 2-chloro-3nitropyridines (1b-f), the displacement of the chlorine atom with substituted anilines in DMSO or 1,4-dioxane in the presence of a mild base (diisopropylethylamine or trimethylamine), under heating, provided compounds 2a-c and 3a-e with good yields (Schemes 1 and 2). A one-pot condensation/cyclization of the substituted 2-anilino-3-nitropyridines (2a-c, 3a-e) with 2-aminonicotinaldehyde under reducing conditions using sodium hydrosulfite in a DMSO/methanol mixture (2:1) at 100 °C afforded compounds 4a-c and 5a-e with yields varying from 25-75%. Intermediates 4c and 5a-e were Boc-deprotected using 4 M HCl in 1,4-dioxane at room temperature, producing 6 and 7a-e in quantitative yields as HCl salts. As shown in Scheme 3, intermediate 5d was reacted with phenyl boronic acid, 3acetamidophenyl boronic acid or 4-acetamidophenyl boronic acid in a Suzuki coupling reaction, affording compounds 8a-d with good yields.14 Standard Boc-deprotection with HCl produced compounds 9a-d in quantitative yields as HCl salts. Alternatively, intermediate 5e was reacted with (pyridin-3-yl)boronic acid under the same Suzuki conditions, affording the Boc-protected compound 8e with a substituent at the 6-position. Standard deprotection with HCl yielded 9e. Synthesis of the gem-dimethyl compound 17 is depicted in Scheme 4. Racemic 2-methyl-2propanesulfinamide (10) was reacted with acetone in the presence of Ti(OEt)4, affording the Npropan-2-ylidene 11 with a 47% yield.15 Halogen-metal exchange using 4-bromo-N,Nbis(trimethylsilyl)aniline and BuLi at a low temperature generated the 4-lithio species, which was trapped with 11. In situ cleavage of the Si-N bonds afforded the aniline 12 with a modest

ACS Paragon Plus Environment

5

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 57

yield.5 Following a displacement reaction using 1e, the resulting compound 13 was subjected to a de-protection/re-protection sequence, yielding the Boc-protected intermediate 14 with excellent yields. Cyclization of 14 with 2-aminonicotinaldehyde under reducing conditions produced 15 with moderate yields. As described above, a Suzuki coupling reaction yielded 16, and a standard Boc-deprotection using HCl gave the final product 17. The synthesis of the amino-cyclobutyl compounds 21a-c, 22 and 23 is shown in Scheme 5. The preparation of tert-butyl (1-(4-amino phenyl)cyclobutyl)carbamate is described5 and is now commercially available. Using the starting nitropyridine 1e and tert-butyl (1-(4-amino phenyl)cyclobutyl)carbamate in a displacement reaction produced 18 with moderate yields. Cyclization under reducing conditions with 2-aminonicotinaldehyde afforded the intermediate 19. A Suzuki coupling reaction using phenyl boronic acid, 3-acetamidophenyl boronic acid or 4acetamidophenyl boronic acid produced 20a-c with good yields. Standard Boc-deprotection with HCl afforded the final compounds 21a-c in quantitative yields. Compound 22 was the result of a conventional amine acylation using acetic anhydride in pyridine. Subjecting the deprotected compound 21b to HCl in dioxane for an extended period (3 days at 50 oC) produced the deacylated compound 23. The replacement of the amino group appending the four-membered ring with a carboxylic acid methyl ester (26) or a carboxamide (27) is shown in Scheme 6. Suzuki coupling (24→25) was executed prior to the reductive cyclization with the 2-amino-nicotinaldehyde, and compound 26 was obtained with a good overall yield (46% over three steps). Hydrolysis followed by EDC coupling produced 27 with a modest yield.

ACS Paragon Plus Environment

6

Page 7 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Results and Discussion The structure-activity-relationship described here was focused on two regions of the 3-(3phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine series: the substitution around the pyridine ring and substitution at the 4-position of the phenyl ring. The SAR of substitutions of the pyridine ring is shown in Table 2. The introduction of a methyl group at the 7- (7a) or 6position (7b) led to improved potency; however, methyl groups at the 5- or 6-position (7c) were not tolerated. A similar effect was noticed in previous SAR studies using the benzylamine amides8, which showed little difference between the two positions on the imidazo[4,5-b]pyridine core. Compounds 7a and 7b displayed very modest inhibitory activity against AKT2 and AKT3. The presence of a chlorine atom at the 5-position (7d) or a bromine atom at the 6-position (7e) did not significantly affect the potency against AKT1. Interestingly, the introduction of a phenyl ring at the 5-position dramatically improved the activity against all three isoforms, while a pyridyl substitution at the 6-position also increased potency against AKT1 but spared AKT2 and AKT3 by 100 fold and >300 fold, respectively. After identifying the key position for improving activity against the AKT isoforms, substitutions at the 5-position were further explored. A limited set of substitutions is exemplified with compounds 9b, 9c and 9d. The introduction of more polar groups at the para or meta position was well tolerated and offered similar levels of AKT inhibition and isozyme selectivity. Combining the SAR points from compounds 4b, 6 and 9a, we were determined to make the hybrid compound 17, which proved to be more arduous than anticipated. A small amount was finally isolated, and the compound showed potent inhibitory activity against AKT1 (Table 3, IC50 = 0.0054 µM). Further investigation into substituting the benzylic position led to compound 21a, in which a cyclobutylamine replaces the gem-dimethyl substitution, and the potency against

ACS Paragon Plus Environment

7

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 57

all three AKT isoforms remarkably improved. The role of the free amino group was confirmed when we tested the acetylated compound 22, which showed a 10-fold loss of potency against AKT1. Replacing the acetamide group in 22 with a reverse acetamide (27) was tolerated and showed similar potency; however, the introduction of an ester moiety (26) at this position was deleterious. A similar SAR trend was observed in our previous study: the acetamide analogue of 6 was active compared to non-polar or polar substituents that lacked hydrogen donors (compound 8d of reference 11, IC50 = 0.81 µM).8 Thus, the introduction of substituents at the benzylic position appeared to change the previously defined SAR when a basic nitrogen is present. The extension of the cyclobutylamine to compound 9b to produce 21b showed comparable inhibitory activity to that of 21a against all AKT isozymes (Table 4). The removal of the acetamide (23) did not change the IC50 values against inactive AKT. Finally, introducing a pyridine nitrogen in the aromatic ring of the 5-position substituent (21c) modestly affected the activities against AKT2 and AKT3. The biochemical potencies of the compounds against inactive, un-phosphorylated AKT were compared with those against active, phosphorylated AKT isoforms in the final stage of optimization. As shown in Table 4, with the exception of 21c, the compounds showed similar inhibitory potency for the enzymatically distinct forms of AKT. The presence of a nitrogen atom in the aromatic substituent at position 5 appeared to be detrimental to the activity against AKT2 and AKT3. In contrast, as reported in our previous study, the initial hits of this chemical series were preferentially highly active in the assay utilizing only the un-phosphorylated form of AKT. Therefore, further lead optimization was continued with the same assay format. Finally, the fully optimized, highly potent inhibitors were capable of inhibiting both the active and inactive forms

ACS Paragon Plus Environment

8

Page 9 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

of AKT with equivalent potency, and we believe that this functionality in the inhibitors is necessary to target constitutive AKT kinase activity in cancer cells. To define the binding mode of these potent AKT inhibitors and to understand the interactions of the phenyl cyclobutylamine and phenyl groups at the 5-position, the crystal structure of unphosphorylated AKT1 was determined in complex with compound 21a (Figure 1).16 The overall conformation of AKT1 was very similar to the previously determined structure8, adopting an identical auto-inhibitory conformation17, and the inhibitor (21a) occupied an allosteric pocket at the interface between the kinase and PH domains. The aminopyridine moiety of the (3-phenyl3H-imidazo[4,5-b]-pyridin-2-yl)pyridin-2-amine core forms hydrogen bonds with the disordered αC-helix and the β4-strand, and the core forms a key hydrophobic interaction with Trp80 in the PH domain. The phenyl ring of phenylcyclobutylamine makes a direct hydrophobic contact with Tyr272 in the highly-conserved YRD motif of the kinase domain. The primary amine of cyclobutylamine forms bidentate hydrogen bonds with the main chain carbonyl of Tyr 72 and the carboxylate group of Asp274, and this interaction facilitates the steric orientation of the cyclobutyl group towards the hydrophobic side chain of Ile 84 and the methyl group of Thr82 in the PH domain. Therefore, a strong proton donor on the benzylic group is critical for the interaction; thus, replacing this side chain with either with a single proton donor group, such as an amide in 27, or a strong proton acceptor, such as the methyl ester group in 26, would be detrimental. The phenyl moiety at the 5-position contacts the acyl side chains of Gln79 and Asn53, and thus, polar substituents (9b, 9c, 9d, 21b and 23) on this hydrophobic phenyl ring are well tolerated, as these groups project towards the solvent. The crystal structure further explains the advantage of these interactions that led to activity improvement at the 5- position but not at

ACS Paragon Plus Environment

9

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 57

the 6- or 7-positions, which is exemplified by 7a, 7b and 7c, where the methyl substituents are directly exposed to the highly polar solvent region. We next examined the in vitro anti-proliferative activity of the compounds in multiple cell lines where the PI3K/AKT pathway is upregulated due to mutational activation; A2780 (ovarian carcinoma), AN3CA (endometrial adenocarcinoma), IGROV-1 (ovarian adenocarcinoma) and LNCaP (prostate adenocarcinoma) were all monitored using a standard MTS assay. Compound 9a exhibited micromolar anti-proliferative activity (Table 5), while its cyclobutylamine analog showed a 10-35 fold increase in activity, being most potent against the IGROV-1 cell line. The acetamide analog 21b was less active against the A2780, AN3CA and LNCaP cell line yet was best at inhibiting the proliferation of IGROV-1 ovarian cells (IC50 = 0.16 µM). The corresponding amine 23 was also very potent in the MTS assay. Consistent with its biochemical inhibition of AKT, the pyridine analog 21c was markedly less active in the cell lines, with the exception of IGROV-1 cells. We assessed the ability of compounds 21a-c to inhibit AKT1 phosphorylation at residues S473 and T308, as well as the downstream PRAS40 residue T246 in cells using Western blot analysis. Compounds 21a and 21b showed excellent inhibition of p-AKT (S473) and p-AKT (T308) in both AN3CA and A2780 cells (Table 6). The inhibition of the downstream protein p-PRAS40 (T246) was observed with 21a (IC50 = 0.31 µM), whereas 21b did not significantly inhibit the phosphorylation of PRAS40 (IC50 = >3 µM). Table 7 shows CYP450 isoform inhibition and microsomal stability using human, mouse and dog liver microsome preparations. Compounds 9a-b, 21a-c and 23 did not significantly inhibit CYP450 1A2, 2C8, 2D6 and 3A4. Compounds 9a and 9b inhibited CYP450 2C9 with a submicromolar IC50 value, while 9a also inhibited CYP450 2C19 (IC50 = 95%. Library compounds were purified by reverse

ACS Paragon Plus Environment

12

Page 13 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

phase chromatography on a preparative LC/UV/MS system (High Throughput Purification) using a mass-triggered fractionation method. Compounds were eluted from the HPLC column (MACCEL 120-10-C18 SH, 10 µm, 20 mm ID x 50 mm) at 88 mL/min with an acetonitrile/water gradient using 0.1% TFA as a modifier. Nuclear magnetic resonance (1H NMR) spectra were recorded on a Varian Mercury Plus NMR spectrometer operating at 400.13 MHz for 1H using a 5 mm ASW PFG probe capable of detecting 1H,

13

C,

31

P, and

15

N nuclei.

The proton chemical shifts (ppm) were in reference to the tetramethylsilane standard (0 ppm). The NMR data are reported with these descriptions: s, singlet; d, doublet; t, triplet; q, quartet; m, multiplet; and br, broad peak. 3-Nitro-N-(p-tolyl)pyridin-2-amine (2a). 2-Chloro-3-nitropyridine 1 (100 mg, 0.63 mmol) was dissolved in dioxane (4 mL) in a round-bottom flask. p-Tolylaniline (68 mg, 0.63 mmol) was then added, followed by DIEA (0.22 mL) addition. The reaction mixture was heated to 80°C for 24 h, and the reaction was stopped when complete as observed by LCMS. After cooling to room temperature, the solvent was removed under reduced pressure to afford an oily residue. The residue was dissolved in ethyl acetate (20 mL) and washed with water and brine (5 mL each). The organic phase was separated and dried over Na2SO4. After filtration, the solvent was removed under reduced pressure. The crude product was carried on to the next step without further purification. MS m/z 230 [M+H]+. N-(4-(tert-Butyl)phenyl)-3-nitropyridin-2-amine (2b). 2b was prepared from 1 as described for 2a using 4-(tert-butyl)aniline. The crude product was purified by column chromatography (1% MeOH/DCM, silica gel) to give 2b (1.55 g, 89 %) as a red solid. Mp 156-158 ºC; 1H NMR (400 MHz, DMSO-d6) δ 9.92 (s, 1H), 8.51 (dd, J =14.5, 5.6 Hz, 1H), 7.54 (d, J = 8.4 Hz, 1H), 7.38 (d, J = 8.5 Hz, 1H), 6.96 (dd, J = 8.1, 4.6 Hz, 1H), 1.29 (s, 9H); MS m/z 272 [M+H]+.

ACS Paragon Plus Environment

13

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 57

tert-Butyl (4-((3-nitropyridin-2-yl)amino)benzyl)carbamate (2c). 2c was prepared from 1 as described for 2a using tert-butyl (4-aminobenzyl)carbamate. The crude product was purified by column chromatography (1% MeOH/DCM, silica gel). MS m/z 345 [M+H]+. tert-Butyl (4-((4-methyl-3-nitropyridin-2-yl)amino)benzyl)carbamate (3a). 3a was prepared from 2-chloro-4-methyl-3-nitropyridine (1b) as described for 2a using tert-butyl (4aminobenzyl)carbamate. The crude product was used directly in the next step without purification. MS m/z 359 [M+H]+. tert-Butyl (4-((5-methyl-3-nitropyridin-2-yl)amino)benzyl)carbamate (3b). 3b was prepared from 2-chloro-5-methyl-3-nitropyridine (1c) as described for 2a using tert-butyl (4aminobenzyl)carbamate. The crude product was used directly in the next step without purification. MS m/z 359 [M+H]+. tert-Butyl (4-((5,6-dimethyl-3-nitropyridin-2-yl)amino)benzyl)carbamate (3c). 3c was prepared from 2-chloro-5,6-dimethyl-3-nitropyridine (1d) as described for 2a using tert-butyl (4aminobenzyl)carbamate. The crude product was used directly in the next step without purification. MS m/z 373 [M+H]+. tert-Butyl (4-((6-chloro-3-nitropyridin-2-yl)amino)benzyl)carbamate (3d). 3d was prepared from 2,6-dichloro-3-nitropyridine (1e) as described for 2a using tert-butyl (4-aminobenzyl) carbamate. The crude product was used directly in the next step without purification. MS m/z 378 [M+H]+. tert-Butyl (4-((5-bromo-3-nitropyridin-2-yl)amino)benzyl)carbamate (3e). 3e was prepared from 5-bromo-2-chloro-3-nitropyridine (1f) as described for 2a using tert-butyl (4-aminobenzyl) carbamate. The crude product was used directly in the next step without purification. Mp 178180 ºC; 1H NMR (400 MHz, DMSO-d6) δ 9.95 (s, 1H), 8.65 (m, 1H), 8.54 (s, 1H), 7.51 (d, J =

ACS Paragon Plus Environment

14

Page 15 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

6.4 Hz, 2H), 7.23 (d, J = 6.4 Hz, 2H), 4.21-4.12 (m, 2H), 1.41 (s, 9H); MS m/z 367, 369 [M(-tBu)+H, M(-t-Bu)+2+H]+. 3-(3-(p-Tolyl)-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine (4a). Crude 3-nitro-N-(ptolyl)pyridin-2-amine 2a was dissolved in DMSO (4 mL) and MeOH (2 mL) in a round bottom flask. 2-aminonicotinaldehyde 4 (77 mg, 1.1 equivalent) and Na2S2O4 (274 mg) were added to the flask. The reaction mixture was heated to 100°C for 18 h. After cooling to room temperature, the reaction mixture was diluted with dichloromethane (50 mL) and washed with water and brine. The organic phase was separated and dried over Na2SO4. After filtration, the solvent was removed under reduced pressure. The crude product was purified by silica gel chromatography (EtOAc/hexane) to afford 20 mg of 3-(3-(p-tolyl)-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2amine (4a) as an off-white solid. Mp 186-188 °C; 1H NMR (400 MHz, DMSO-d6) δ: 8.29-8.28 (dd, J = 5.0, 1.6 Hz, 1H), 8.18-8.15 (dd, J = 7.8, 1.1 Hz, 1H), 7.96-7.95 (dd, J = 4.7, 1.6 Hz, 1H), 7.37-7.33 (dd, J = 8.21, 5.09 Hz, 1H), 7.31-7.26 (m, 4H), 7.20-7.17 (dd, J = 7.8, 1.9 Hz, 1H), 6.96 (s, 2H), 6.39-6.36 (dd, J = 7.8, 4.6 Hz, 1H), 2.36 (s, 3H); MS m/z 302 [M+H]+. 3-(3-(4-(tert-Butyl)phenyl)-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine (4b). 4b was prepared as described for 4a using 2b and 2-aminonicotinaldehyde. Mp 175-180 ºC; 1H NMR (400M Hz, Acetone-d6) δ 8.44−8.42 (dd, J = 4.7, 1.2 Hz, 1H), 8.26-8.23 (dd, J = 8.2,1.6 Hz, 1H), 8.05-8.02 (dd, J = 6.3, 1.6 Hz, 1H), 7.75-7.73 (dd, J = 7.8, 1.6 Hz, 1H), 7.70-7.68 (dd, J = 6.6, 2.3 Hz, 2H), 7.57-7.55 (dd, J = 8.6, 1.9 Hz, 2H), 7.48-7.44 (dd, J = 8.2, 4.7 Hz, 1H), 6.82-6.78 (dd, J = 7.8, 6.3 Hz, 1H), 1.41 (s, 9H). MS m/z 344 [M+H]+; Anal. (C21H21N5·1.5 TFA·0.1 acetone) calcd: C, 56.10; H, 4.48; N 13.46. Found: C, 56.32; H, 4.25; N, 13.70. tert-Butyl

(4-(2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin-3-yl)benzyl)carbamate

(4c). 4c was prepared as described for 4a using 2c and 2-aminonicotinaldehyde. Mp 172-173 ºC;

ACS Paragon Plus Environment

15

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 16 of 57

H NMR (400 MHz, DMSO-d6) δ 8.31 (dd, J = 4.8, 1.5 Hz, 1H), 8.20 (dd, J = 8.0, 1.5 Hz, 1H),

7.99 (dd, J = 4.8, 1.8 Hz, 1H), 7.49 (t, J = 6.3 Hz, 1H), 7.43 – 7.32 (m, 5H), 7.20 (dd, J = 7.7, 1.9 Hz, 1H), 6.99 (s, 2H), 6.39 (dd, J = 7.7, 4.8 Hz, 1H), 4.21 (d, J = 6.2 Hz, 2H), 1.41 (s, 9H); MS m/z 417 [M+H]+. tert-Butyl

(4-(2-(2-aminopyridin-3-yl)-7-methyl-3H-imidazo[4,5-b]pyridin-3-yl)benzyl)

carbamate (5a). 5a was prepared from 3a as described for 4a. Mp 160-162 ºC; 1H NMR (400 MHz, CD3OD) δ: 8.17 (d, J = 5.1 Hz, 1H), 7.96 (dt, J = 5.1, 1.4 Hz, 1H), 7.45 (d, J = 7.8 Hz, 2H), 7.37-7.31 (m, 3H), 7.24 (d, J = 5.1 Hz, 1H), 6.49-6.45 (m, 1H), 4.31 (br.s, 2H), 2.74 (s, 3H), 1.46 (s, 9H); MS m/z 431 [M+H]+. tert-Butyl

(4-(2-(2-aminopyridin-3-yl)-6-methyl-3H-imidazo[4,5-b]pyridin-3-yl)benzyl)

carbamate (5b). 5b was prepared from 3b as described for 4a. Mp 211-212 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.16 (dd, J = 2.0, 0.8 Hz, 1H), 8.04–7.95 (m, 2H), 7.49 (t, J = 6.2 Hz, 1H), 7.36 (s, 4H), 7.17 (dd, J = 7.7, 1.9 Hz, 1H), 7.02 (s, 2H), 6.38 (dd, J = 7.7, 4.8 Hz, 1H), 4.21 (d, J = 6.2 Hz, 2H), 2.45 (d, J = 0.8 Hz, 3H), 1.41 (s, 9H), 1.34; MS m/z 431 [M+H]+. tert-Butyl (4-(2-(2-aminopyridin-3-yl)-5,6-dimethyl-3H-imidazo[4,5-b]pyridin-3-yl)benzyl) carbamate (5c). 5c was prepared from 3c as described for 4a. The crude product was used without purification. MS m/z 445 [M+H]+. tert-Butyl

(4-(2-(2-aminopyridin-3-yl)-5-chloro-3H-imidazo[4,5-b]pyridin-3-yl)benzyl)

carbamate (5d). 5d was prepared from 3d as described for 4a. Mp 235-237 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.26 (d, J = 8.6 Hz, 1H), 7.99 (dd, J = 4.7, 2.0, 1H), 7.49 (t, J = 6.1 Hz, 1H), 7.45 (d, J = 8.2 Hz, 1H), 7.42-7.35 (m, 4H), 7.21 (dd, J = 7.8, 2.0 Hz, 1H), 6.92 (s, 2H), 6.41 (dd, J = 7.4, 4.7 Hz, 1H), 4.22 (d, J = 6.1 Hz, 2H), 1.41 (s, 9H); MS m/z 451 [M+H]+.

ACS Paragon Plus Environment

16

Page 17 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

tert-Butyl

4-(2-(2-aminopyridin-3-yl)-6-bromo-3H-imidazo[4,5-b]pyridine-3-yl)benzyl

carbamate (5e). 5e was prepared from 3e as described for 4a. The product was purified by column chromatography (1-5% methanol in dichloromethane) followed by re-crystallization in 1:1 ethyl acetate/hexanes. Mp 176-178 °C; 1H NMR (400 MHz, DMSO-d6) δ 8.50 (d, J = 2.0 Hz, 1H), 8.40 (d, J = 2.4 Hz, 1H), 7.99 (dd, J = 4.7, 2.0 Hz, 1H), 7.48 (t, J = 5.6 Hz, 1H), 7.407.31 (m, 3H), 7.23 (dd, J = 7.8, 2.0 Hz, 1H), 6.97 (s, 2H), 6.40 (dd, J = 7.7, 4.4 Hz, 1H), 4.121 (d, J = 6.2 Hz, 2H), 1.41 (s, 9H). MS m/z 495, 497 [M+H, M+2+H]+. 3-(3-(4-(Aminomethyl)phenyl)-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine (6). HCl (4 M in dioxane, 7.2 mL, 28.8 mmol) was added to a solution of 4c (0.7 g, 1.7 mmol) in methanol (5 mL), and the mixture was stirred at room temperature for 4 h. The solution was concentrated under reduced pressure to yield 6 (0.82 g, quantitative yield) as a hydrochloric acid salt. Mp 255257 ºC; 1H NMR (400 MHz, DMSO-d6) δ 8.44 (m, 3H), 8.30 (dd, J = 8.0, 1.4 Hz, 1H), 8.12 (dd, J = 6.2, 1.6 Hz, 1H), 7.87 (d, J = 6.6 Hz, 1H), 7.65 (d, J = 8.4 Hz, 2H), 7.57 (d, J = 8.4 Hz, 2H), 7.48 (dd, J = 8.0, 4.7 Hz, 1H), 6.85 (dd, J = 7.1, 6.6 Hz, 1H), 4.12 (d, J = 5.6 Hz, 2H), 3.81 (s, 2H). MS m/z 317 [M+H]+; Anal. (C18H16N6·4.6 HCl·4.2 H2O·0.8 Et2O) calcd: C, 41.13; H, 6.02; N, 13.58. Found: C, 41.12; H, 6.02; N, 13.58. 3-(3-(4-(Aminomethyl)phenyl)-7-methyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (7a). 7a was prepared from 5a as described for 6. Mp 210-212 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.52 (s, 3H), 8.45 (s, 2H), 8.27 (d, J = 4.7 Hz, 1H), 8.14 (dd, J = 6.3, 1.6 Hz, 1H), 7.91 (dd, J = 7.4, 1.6 Hz, 1H), 7.67–7.64 (m, 2H), 7.57–7.53 (m, 2H), 7.31 (d, J = 5.4 Hz, 1H), 6.88 (dd, J = 7.4, 6.2 Hz, 1H), 4.10 (m, 2H), 2.70 (s, 3H); MS m/z 331 [M+H]+. 3-(3-(4-(Aminomethyl)phenyl)-6-methyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (7b). 7b was prepared from 5b as described for 6. Mp 220-230 ºC; 1H NMR (400

ACS Paragon Plus Environment

17

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 57

MHz, DMSO-d6) δ: 8.65 (s, 3H), 8.53 (s, 2H), 8.29 (dd, J = 2.0, 0.7 Hz, 1H), 8.16 (dd, J = 6.2, 1.7 Hz, 1H), 8.12 (dd, J = 2.0, 0.9 Hz, 1H), 7.91 (dd, J = 7.5, 1.6 Hz, 1H), 7.75–7.64 (m, 2H), 7.62–7.48 (m, 2H), 6.90 (dd, J = 7.5, 6.2 Hz, 1H), 4.10 (q, J = 5.8 Hz, 2H), 2.49 (s, 3H); MS m/z 331 [M+H]+; Anal. (C19H18N6·3.43 HCl·0.43 EtOAc) calcd: C, 50.45; H, 5.08; N, 17.04. Found: C, 50.42; H, 5.21; N, 17.07. 3-(3-(4-(Aminomethyl)phenyl)-5,6-dimethyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2amine hydrochloride (7c). 7c was prepared from 5c as described for 6. Mp 103-112 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 7.91 (s, 2H), 7.45-7.40 (m, 2H), 7.32-7.26 (m, 2H), 7.11 (d, J = 7.2 Hz, 1H), 6.99 (m, 2H), 6.38 (dd, J = 7.2, 6.3 Hz, 1H), 3.80 (s, 2H), 3.40-3.15 (br.s, 3H), 2.41 (s, 3H), 2.35 (s, 3H); MS m/z 345 [M+H]+. 3-(3-(4-(Aminomethyl)phenyl)-5-chloro-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (7d). 7d was prepared from 5d as described for 6. Mp 208-211 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.55 (s, 3H), 8.37 (dd, J = 8.4, 1.0 Hz, 1H), 8.18 – 8.12 (m, 1H), 7.97 – 7.91 (m, 1H), 7.69 (d, J = 8.0 Hz, 2H), 7.61 – 7.51 (m, 3H), 6.90 (t, J = 6.9 Hz, 1H), 4.11 (d, J = 5.9 Hz, 2H), 3.57 (s, 2H); MS m/z 351 [M+H]+; Anal. (C18H15N6Cl·2.58 HCl·0.16 EtOAc) calcd: C, 48.78; H, 4.14; N, 18.31. Found: C, 48.80; H, 4.32; N, 18.31. 3-(3-(4-(Aminomethyl)phenyl)-6-bromo-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (7e). 7e was prepared from 5e as described for 6. Mp. 221-223oC; 1H NMR (DMSO-d6) 400 M Hz δ: 8.60 (d, J = 2.0 Hz, 1H), 8.56 (bs, 2H), 8.51 (d, J = 2.4 Hz, 1H), 8.38 (bs, 2H), 8.13 (dd, J = 2.0 Hz and 4.7 Hz, 1H), 7.95 (dd, J = 1.6 Hz and 7.4 Hz, 1H), 7.63 (d, J = 8.6 Hz, 2H), 7.53 (d, J = 8.6 Hz, 2H), 6.89 (dd, J = 6.2 Hz and 7.4 Hz, 1H), 4.17 (app q, J = 5.5 Hz, 1H); MS m/z 394, 396 [M+H, M+2+H]+.

ACS Paragon Plus Environment

18

Page 19 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

tert-Butyl

(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)benzyl)

carbamate (8a). tert-Butyl (4-(2-(2-aminopyridin-3-yl)-5-chloro-3H-imidazo[4,5-b]pyridin-3yl)benzyl)carbamate (5d) (5.1 g, 11.33 mmol) and phenyl boronic acid (2.76 g, 22.6 mmol) in suspension (200 mL toluene/200 mL EtOH) were treated with saturated aqueous NaHCO3 (33 mL), and the mixture was degassed for 5 min. The catalyst Pd(PPh3)4 (0.51 g, 0.44 mmol) was added, and the reaction mixture was stirred overnight at 100 °C. Upon cooling to room temperature, the mixture was extracted with DCM (3 x 100 mL). The combined organic extracts were washed with sat. aq. NaHCO3 and then with water. The solution was dried over Na2SO4, filtered and concentrated in vacuo. The crude product was purified by column chromatography (hexanes/ethyl

acetate,

5:95).

The

tert-butyl

(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-

imidazo[4,5-b]pyridin-3-yl)benzyl)carbamate (8a) was obtained as dark red crystals (4.7 g, 84%). Mp 209-212 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.25 (dd, J = 8.4, 2.3 Hz, 1H), 8.04 – 7.94 (m, 4H), 7.50 – 7.33 (m, 8H), 7.20 (dd, J = 7.8, 1.9 Hz, 1H), 7.00 (s, 2H), 6.40 (dd, J = 7.6, 4.9 Hz, 1H), 4.22 (d, J = 6.2 Hz, 2H), 1.39 (s, 9H); MS m/z 493 [M+H]+. tert-Butyl (4-(5-(3-acetamidophenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin-3yl)benzyl)carbamate (8b). 8b was prepared from 5d as described for 8a using (3acetamidophenyl)boronic acid. The crude product was purified by column chromatography (95:5 ethyl acetate/methanol). MS m/z 550 [M+H]+. tert-Butyl (4-(5-(4-acetamidophenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin-3yl)benzyl)carbamate (8c). 8c was prepared from 5d as described for 8a, using (4acetamidophenyl)boronic acid. The crude product was purified by column chromatography (5:95 hexanes/ethyl acetate). MS m/z 550 [M+H]+.

ACS Paragon Plus Environment

19

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 57

tert-Butyl (4-(2-(2-aminopyridin-3-yl)-5-(1H-pyrazol-4-yl)-3H-imidazo[4,5-b]pyridin-3-yl) benzyl)carbamate (8d). 8d was prepared from 5d as described for 8a using (1H-pyrazol-4yl)boronic acid. Mp. 243-244 °C; 1H NMR (400 MHz, DMSO-d6) δ 12,99 (s, 1H), 8.19 (s, 1H), 8.12 (d, J = 8.8 Hz, 1H), 7.95 (d, J = 5.2 Hz, 1H), 7.92 (s, 1H), 7.68 (d, J = 8.4 Hz, 1H), 7.47 (t, J = 5.6 Hz, 1H), 7.40-7.33 (m, 4H), 7.13 (d, J = 7.2 Hz, 1H), 6.94 (s, 2H), 6.36 (t, J = 6.0 Hz, 1H), 4.20 (d, J = 6.4Hz, 2H), 1.39 (s, 9H); MS m/z 483 [M+H]+. tert-

Butyl

(4-(2-(2-aminopyridin-3-yl)-6-(pyridin-3-yl)-3H-imidazo[4,5-b]pyridin-3-yl)

benzyl)carbamate (8e). 8e was prepared from 5e as described for 8a using (pyridin-3-yl)boronic acid. The crude residue was purified by silica gel chromatography (2-20% methanol in ethyl acetate), yielding 3.9 g of 8e (7.9 mmol, 99% yield). 1H NMR (400 MHz, DMSO-d6) δ: 8.98 (d, J = 1.9 Hz, 1H), 8.64 (d, J = 2.0 Hz, 1H), 8.59 (dd, J = 1.6 Hz and 4.7 Hz, 1H), 8.54 (d, J = 2.0 Hz, 1H), 8.20 (m, 1H), 7.98 (m, 1H), 7.52 (m, 2H), 7.48-7.34 (m, 4H), 7.23 (m, 1H), 7.01 (s, br, 2H), 6.38 (m, 1H), 4.19 (m, 2H), 1.38 (s, 9H); MS m/z 438, 494, [M-(t-Bu)+H, M+H]+. 3-(3-(4-(Aminomethyl)phenyl)-5-phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (9a). 9a was prepared from 8a as described for 6. Mp 215-218 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.52 (s, 3H), 8.35 (d, J = 8.2 Hz, 1H), 8.16 – 8.11 (m, 1H), 8.05 (t, J = 8.5 Hz, 3H), 7.90 (d, J = 7.0 Hz, 1H), 7.68 (d, J = 7.8 Hz, 2H), 7.65 – 7.59 (m, 2H), 7.50 – 7.37 (m, 3H), 6.88 (q, J = 5.7, 4.9 Hz, 1H), 4.68 (s, 2H), 4.11 (d, J = 5.9 Hz, 2H); MS m/z 393 [M+H]+; Anal. (C24H20N6·3.14 HCl ·0.45 EtOAc) calcd: C, 56.69; H, 4.93; N, 15.38. Found: C, 56.68; H, 5.18; N, 15.37. N-(3-(3-(4-(Aminomethyl)phenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin-5yl)phenyl)acetamide hydrochloride (9b). 9b was prepared from 8b as described for 6. Mp 245248 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 10.16 (s, 1H), 8.47 (s, 3H), 8.39 (s, 2H), 8.35 (d, J =

ACS Paragon Plus Environment

20

Page 21 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

8.1 Hz, 1H), 8.18 (d, J = 2.6 Hz, 1H), 8.15 – 8.08 (m, 1H), 7.89 (d, J = 8.1 Hz, 2H), 7.63 (dt, J = 11.8, 7.5 Hz, 5H), 7.36 (t, J = 7.9 Hz, 1H), 6.87 (t, J = 6.6 Hz, 1H), 4.10 (d, J = 5.9 Hz, 2H), 2.04 (s, 3H); MS m/z 450 [M+H]+; Anal. (C26H23N7O ·3.35 HCl) calcd: C, 54.63; H, 4.65; N, 17.15. Found: C, 54.62; H, 4.67; N, 16.81. N-(4-(3-(4-(Aminomethyl)phenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin-5yl)phenyl)acetamide hydrochloride (9c). 9c was prepared from 8c as described for 6. Mp 227230 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 10.25 (s, 1H), 8.58 (s, 3H), 8.33 (d, J = 8.4 Hz, 1H), 8.16 (dd, J = 6.4, 1.7 Hz, 1H), 8.01 (t, J = 7.9 Hz, 3H), 7.90 (dd, J = 7.6, 1.7 Hz, 1H), 7.75 – 7.59 (m, 6H), 6.90 (t, J = 6.9 Hz, 1H), 5.80 (s, 2H), 4.13 (d, J = 5.8 Hz, 2H), 2.07 (s, 3H); MS m/z 450 [M+H]+; Anal. (C26H23N7O ·3.35 HCl . 0.28 EtOAc . 0.3 H2O) calcd: C, 54.33; H, 4.90; N, 16.35. Found: C, 54.35; H, 4.96; N, 16.11. 3-(3-(4-(Aminomethyl)phenyl)-5-(1H-pyrazol-4-yl)-3H-imidazo[4,5-b]pyridin-2yl)pyridin-2-amine hydrochloride (9d). 9d was prepared from 8d as described for 6. Mp. 264269 °C; 1H NMR (400 MHz, DMSO-d6) δ: 8.50 (br, 4H), 8.43 (br, 1H), 8.22 (d, J = 8.4 Hz, 1H), 8.13-8.09 (m, 3H), 7.85 (d, J = 7.6 Hz, 1H), 7.77 (d, J = 8.8 Hz, 1H), 7.66 (d, J = 8.0 Hz, 2H), 7.58 (d, J = 8.8 Hz, 2H), 6.86 (t, J = 7.2 Hz, 1H), 4.10 (q, J = 5.2 Hz, 2H); MS m/z 383 [M+H]+. 3-(3-(4-(Aminomethyl)phenyl)-6-(pyridin-3-yl)-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2amine hydrochloride (9e). 9e was prepared from 8e as described for 6. 1H NMR (400 MHz, (CD3OD) δ: 9.38 (d, J = 2.0 Hz, 1H), 9.11 (d, J = 2.0 Hz, 1H), 8.95-8.93 (m, 1H), 8.89 (d, J = 2.0 Hz, 1H), 8.78 (m, 1H), 8.83-8.25 (m, 1H), 8.06-8.04 (m, 1H), 7.88-7.86 (m, 1H), 7.77-7.66 (m, 4H), 6.86-6.83 (m, 1H), 4.23 (m, 2H), MS m/z 394 [M+H]+. 2-Methyl-N-(propan-2-ylidene)propane-2-sulfinamide (11). Ti(OEt)4 (5.36 mL) was added dropwise over the course of 15 min to a solution of 2-methyl-2-propanesulfinamide (10) (1.47 g,

ACS Paragon Plus Environment

21

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 57

12.1 mmol) and acetone (0.98 mL) in THF (24 mL) chilled to 0 ºC. After being stirred at room temperature for 3 days, the reaction mixture was quenched by the rapid addition of an ice-cooled saturated sodium bicarbonate solution. The suspension was filtered through glass-fiber filter paper and was washed with ethyl acetate. The filtrate was washed with sat. aq. NaHCO3 solution and brine. The organics were dried over Na2SO4 and concentrated in vacuo. Purification by column chromatography (10-60% ethyl acetate in hexanes) yielded 2-methyl-N-(propan-2ylidene)propane-2-sulfinamide (11) (0.92 g, 47%). 1H NMR (400 MHz, CDCl3) δ: 2.34 (s, 3H), 2.18 (s, 3H), 1.23 (s, 9H). N-(2-(4-Aminophenyl)propan-2-yl)-2-methylpropane-2-sulfinamide (12). A solution of nbutyllithium in hexanes (1.65 M, 5.2 mL) was added dropwise to a solution of 4-bromo-N,Nbis(trimethylsilyl)aniline (2.55 mL) in THF (14 mL) at -78 ºC. The resulting mixture was stirred for 1.5 h at -78 ºC, after which a solution of N-isopropylidene-2-methylpropane-2-sulfinamide (11) in THF (2.8 mL) was added dropwise at -78 ºC. The reaction mixture was stirred for an additional 1 h at -78 ºC and then allowed to warm to room temperature. After being stirred for 18 h at room temperature, the reaction mixture was poured into an ice-cooled sat. aq. NaHCO3 solution. The aqueous layer was extracted with ethyl acetate. The combined organic layers were washed with a sat. aq. NaHCO3 solution and brine and then dried over Na2SO4. The dried solution was filtered, and the filtrate was concentrated to dryness. The residue was diluted with diisopropylether and extracted with a 1 M citric acid solution. The aqueous extracts were combined and alkalinized with solid sodium bicarbonate to pH>7. The basic aqueous layer was extracted with ethyl acetate, and the organic layer was washed with brine. The organics were dried over anhydrous Na2SO4 and concentrated in vacuo. Purification by column chromatography (50-100% ethyl acetate in hexanes) produced N-(2-(4-aminophenyl)propan-2-

ACS Paragon Plus Environment

22

Page 23 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

yl)-2-methylpropane-2-sulfinamide (12) (173 mg, 12%). 1H NMR (400 MHz, CDCl3) δ: 7.26 (d, J = 8.7 Hz, 2H), 6.65 (d, J = 8.7 Hz, 2H), 3.66 (brs, 1H), 3.31 (s, 1H), 1.67 (s, 3H), 1.64 (s, 3H), 1.20 (s, 9H). N-(2-(4-((6-Chloro-3-nitropyridin-2-yl)amino)phenyl)propan-2-yl)-2-methylpropane-2sulfinamide (13). 13 was prepared from 2,6-dichloro-3-nitropyridine (1e) as described for 2a using

N-(2-(4-aminophenyl)propan-2-yl)-2-methylpropane-2-sulfinamide

(12).

The

crude

product was purified by column chromatography (30-100% ethyl acetate in hexanes). MS m/z 411 [M+H]+. tert-Butyl (2-(4-((6-chloro-3-nitropyridin-2-yl)amino)phenyl)propan-2-yl)carbamate (14). A solution of HCl in dioxane (4 M, 130 µL) was added dropwise to a solution of N-(1-(4-((6chloro-3-nitropyridin-2-yl)amino)phenyl)-1-methylethyl)-2-methylpropane-2-sulfinamide (13) (107 mg, 0.26 mmol) in DCM (5 mL) at room temperature. The reaction mixture was stirred for 30 min. Hexane was added to the suspension, and the solid was filtered to yield an N-(4-(1amino-1-methylethyl)phenyl)-6-chloro-3-nitropyridin-2-amine hydrochloride intermediate. Sat. aq. NaHCO3 solution (6 mL) was added to a suspension of N-(4-(1-amino-1methylethyl)phenyl)-6-chloro-3-nitropyridin-2-amine hydrochloride in THF (3 mL) chilled to 0 ºC, followed by dropwise addition of a solution of di-tert-butyl dicarbonate (167 mg) in THF (3 mL). After being stirred at room temperature overnight, the reaction mixture was extracted with ethyl acetate. The organic layer was washed with sat. aq. NaHCO3 solution and brine. The organics were dried over Na2SO4 and concentrated in vacuo. Purification by column chromatography (3-30% ethyl acetate in hexanes) produced tert-butyl (2-(4-((6-chloro-3nitropyridin-2-yl)amino)phenyl) propan-2-yl)carbamate (14) (99 mg, 2 steps 93%). 1H NMR (400 MHz, CDCl3) δ: 10.25 (br.s, 1H), 8.46 (d, J = 8.7Hz, 1H), 7.61 (d, J = 8.7 Hz, 2H), 7.43 (d,

ACS Paragon Plus Environment

23

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 57

J = 8.7 Hz, 2H), 6.79 (d, J = 8.7 Hz, 1H), 4.94 (brs, 1H), 1.64 (s, 6H), 1.50-1.00 (m, 9H); MS m/z 351 [M-(t-Bu)+H]. tert-Butyl

(2-(4-(2-(2-aminopyridin-3-yl)-5-chloro-3H-imidazo[4,5-b]pyridin-3-yl)phenyl)

propan-2-yl)carbamate (15). 15 was prepared as described for 4a using 14 and 2aminonicotinaldehyde. Purification by column chromatography (10-100% ethyl acetate in hexanes) produced tert-butyl (2-(4-(2-(2-aminopyridin-3-yl)-5-chloro-3H-imidazo[4,5-b]pyridin3-yl)phenyl)propan-2-yl)carbamate (15) (30 mg, 26%). MS m/z 479 [M+H]+. tert-Butyl (2-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)phenyl) propan-2-yl)carbamate (16). 16 was prepared as described for 8a using 15 and phenyl boronic acid. Purification by column chromatography (30-100% ethyl acetate in hexanes) yielded tertbutyl (2-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)phenyl) propan-2yl)carbamate (16) (27 mg, 81%). MS m/z 521 [M+H]+. 3-(3-(4-(2-Aminopropan-2-yl)phenyl)-5-phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2amine (17). 17 was prepared from 16 as described for 6. 1H NMR (400 MHz, DMSO-d6) δ: 8.90-8.70 (m, 3H), 8.37 (d, J = 8.3 Hz, 2H), 8.15 (dd, J = 6.0 Hz and 1.8 Hz, 1H,), 8.08-8.03 (m, 3H), 7.86 (dd, J = 7.3 Hz and 1.4 Hz, 1H), 7.79 (d, J = 8.7 Hz, 2H), 7.67 (d, J = 8.7 Hz, 2H), 7.52-7.47 (m, 2H), 7.46-7.41 (m, 1H), 6.89 (dd, J = 7.3 Hz and 6.4 Hz, 1H), 1.70 (s, 6H); MS m/z 421 [M+H]+. tert-Butyl (1-(4-((6-chloro-3-nitropyridin-2-yl)amino)phenyl)cyclobutyl)carbamate (18). A solution of 2,6-dichloro-3-nitropyridine (1e) (5.11 g, 26.4 mmol) in DMA (50 mL) and triethylamine (5 mL) cooled to 0 ºC was added dropwise to a solution of tert-butyl (1-(4-amino phenyl)cyclobutyl)carbamate (6.3 g, 24.0 mmol)) in DMA (25 mL). The reaction mixture was stirred at 0 ºC for one hour and then at room temperature overnight. The reaction mixture was

ACS Paragon Plus Environment

24

Page 25 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

then diluted with water (250 mL) and extracted with ethyl acetate (2 x 200 mL). The organics were combined and washed with a sat. aq. NaHCO3 solution, water and brine. The organics were dried over Na2SO4 and concentrated in vacuo. Purification by column chromatography (15% ethyl

acetate

in

hexanes)

produced

tert-butyl

(1-(4-((6-chloro-3-nitropyridin-2-

yl)amino)phenyl)cyclobutyl)carbamate (18) as an orange solid (5.05 g, 50%). 1H NMR (400 MHz, DMSO-d6) δ: 10.05 (s, 1H), 8.52 (d, J = 8.8Hz, 1H), 7.56 – 7.52 (m, 2H), 7.42 – 7.37 (m, 3H), 6.98 (d, J = 8.8 Hz, 1H), 2.47 – 2.34 (m, 4H), 2.04 – 1.96 (m, 1H), 1.84 – 1.74 (m, 1H), 1.30 (bs, 9H); MS m/z 419 [M+H]+. tert-Butyl

(1-(4-(2-(2-aminopyridin-3-yl)-5-chloro-3H-imidazo[4,5-b]pyridin-3-yl)phenyl)

cyclobutyl)carbamate (19). 19 was prepared as described for 6 using 18 and 2aminonicotinaldehyde. 1H NMR (400M Hz, DMSO-d6) δ 8.26 (d, J = 8.0 Hz, 1H), 8.00 – 7.96 (m, 1H), 7.69 (bs, 1H), 7.54 – 7.35 (m, 5H), 7.24 – 7.08 (m, 1H), 7.04 – 6.96 (m, 2H), 6.32 – 6.28 (m, 1H), 2.48 – 2.35 (m, 4H), 2.06 – 1.96 (m, 1H), 1.86 – 1.76 (m, 1H), 1.40 – 1.06 (m, 9H); MS m/z 491 [M+H]+. tert-Butyl (1-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3yl)phenyl)cyclobutyl)carbamate (20a). 20a was prepared from 19 as described for 8a using phenylboronic acid. The crude product was purified by column chromatography (10-100% ethyl acetate in hexanes), yielding 20a with some impurities. The solid was re-crystallized from ethyl acetate, affording an off-white solid (7.2 g). Mp 111-116 °C; 1H NMR (400M Hz, DMSO-d6) δ: 8.23 (d, J = 8.0 Hz, 1H), 8.04 – 7.98 (m, 3H), 7.94 (d, J = 8.0 Hz, 1H), 7.55 (d, J = 8.8 Hz, 2H), 7.46 – 7.35 (m, 6H), 7.18 – 7.14 (m, 1H), 6.90 (bs, 1H), 6.33 (dd, J = 7.6Hz and 4.4 Hz, 1H), 2.48 – 2.40 (m, 4H), 2.09 – 2.00 (m, 1H), 1.89 – 1.79 (m, 1H), 1.30 (m, 9H); MS m/z 533 [M+H]+.

ACS Paragon Plus Environment

25

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 57

tert-Butyl (1-(4-(5-(3-acetamidophenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5b]pyridin-3-yl)phenyl)cyclobutyl)carbamate (20b). 20b was prepared from 19 as described for 8a using (3-acetamidophenyl)boronic acid. Purification by column chromatography (0-10% methanol in dichloromethane) yielded 20b as a brown solid with some co-eluting impurities. The fractions with the product were combined and concentrated to produce a dark brown solid. The solid was triturated with ethyl acetate to afford a tan solid (2.6 g, 70%). Mp 160-163 °C; 1H NMR (400M Hz, DMSO-d6) δ: 8.23 (d, J = 8.0 Hz, 1H), 8.04 – 7.98 (m, 3H), 7.94 (d, J = 8.0 Hz, 1H), 7.55 (d, J = 8.8 Hz, 2H), 7.46 – 7.35 (m, 6H), 7.18 – 7.14 (m, 1H), 6.90 (bs, 1H), 6.33 (dd, J = 7.6Hz and 4.4 Hz, 1H), 2.48 – 2.40 (m, 4H), 2.09 – 2.00 (m, 1H), 1.89 – 1.79 (m, 1H), 1.30 (m, 9H); MS m/z 590 [M+H]+; Anal. (C34H35N7O3 . 0.18 EtOAc) calcd: C, 68.87; H, 6.07; N, 16.19. Found: C, 69.12; H, 6.34; N, 15.94. tert-Butyl

(1-(4-(2-(2-aminopyridin-3-yl)-5-(pyridin-3-yl)-3H-imidazo[4,5-b]pyridin-3-yl)

phenyl)cyclobutyl)carbamate (20c). 20c was prepared from 19 as described for 8a using pyridin-3-ylboronic acid. Purification by column chromatography (0-10% methanol in dichloromethane) produced 20c with some impurities. The solid was triturated with ethyl acetate to yield a yellow solid (0.084 g, 79%). Mp 163-164 °C; 1H NMR (400M Hz, DMSO-d6) δ: 9.21 (dd, J = 2.4, 0.8 Hz, 1H), 8.56 (dd, J = 4.8, 1.6 Hz, 1H), 8.34 (ddd, J = 8.1, 2.3, 1.6 Hz, 1H), 8.29 (d, J = 8.3 Hz, 1H), 8.05 (d, J = 8.4 Hz, 1H), 7.97 (dd, J = 4.8, 1.9 Hz, 1H), 7.55 – 7.48 (m, 2H), 7.45 (dt, J = 11.8, 4.2 Hz, 3H), 7.04 (s, 2H), 6.31 (dd, J = 7.7, 4.8 Hz, 1H),4.45-2.40 (m, 4H), 2.10-1.90 (m, 1H), 1.85-1.75 (s, 1H), 1.33 (s, 9H); MS m/z 534 [M+H]+. 3-(3-(4-(1-Aminocyclobutyl)phenyl)-5-phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2amine hydrochloride (21a). 21a was prepared from 20a as described for 6. The product was suspended in Et2O and then filtered off, producing 3-(3-(4-(1-aminocyclobutyl)phenyl)-5-

ACS Paragon Plus Environment

26

Page 27 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (21a) as a white solid. Mp 280-285 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 8.94 (s, 3H), 8.47 (bs, 1H) 8.38 (d, J = 8.8Hz, 1H), 8.19 – 8.15 (m, 1H), 8.10 – 8.03 (m, 3H), 7.93 – 7.88 (m, 1H), 7.76 (d, J = 8.4 Hz, 1H), 7.69 (d, J = 8.4 Hz, 2H), 7.52 – 7.40 (m, 3H), 6.92 (t, J = 7.6 Hz, 1H), 2.70 – 2.57 (m, 4H), 2.29 – 2.20 (m, 1H), 1.90 – 1.80 (m, 1H); MS m/z 433 [M+H]+; Anal. (C27H24N6·3.06 HCl·0.01 dioxane . 0.03 diethylether) calcd: C, 59.61; H, 5.28; N, 15.36. Found: C, 59.62; H, 5.05; N, 15.36. N-(3-(3-(4-(1-Aminocyclobutyl)phenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5b]pyridin-5-yl)phenyl)acetamide hydrochloride (21b). 21b was prepared from 20b as described for 6. The product was suspended in Et2O and then filtered off, producing N-(3-(3-(4(1-aminocyclobutyl)phenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin-5yl)phenyl)acetamide hydrochloride (21b) as a yellow solid. Mp 233-237 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 10.25 (s, 1H), 8.98 (bs, 3H), 8.56–8.43 (m, 2H), 8.38 (d, J = 8.4 Hz, 1H), 8.24– 8.22 (m, 1H), 8.18 (dd, J = 4.8 Hz and 1.6 Hz, 1H), 7.96–7.92 (m, 1H), 7.79–7.66 (m, 6H), 7.33 (t, J = 8.0 Hz, 1H), 6.93 (dd, J = 7.6 Hz and 6.0 Hz 1H), 2.70–2.58 (m, 4H), 2.32–2.20 (m, 1H), 2.08 (s, 3H), 1.92–1.82 (m, 1H); MS m/z 433 [M+H]+; Anal. (C29H27N7O·3.36 HCl·0.23 dioxane .

0.06 diethylether) calcd: C, 56.89; H, 5.19; N, 15.40. Found: C, 56.89; H, 5.18; N, 15.40. 3-(3-(4-(1-Aminocyclobutyl)phenyl)-5-(pyridin-3-yl)-3H-imidazo[4,5-b]pyridin-2-

yl)pyridin-2-amine hydrochloride (21c). 21c was prepared from 20c as described for 6. The product

was

suspended

in

Et2O

and

then

filtered

off,

yielding

3-(3-(4-(1-

aminocyclobutyl)phenyl)-5-(pyridin-3-yl)-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (21c) as a yellow solid. Mp 283-287 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 9.45 (s, 1H), 9.10–9.00 (m, 4H), 8.90 (d, J = 4.8 Hz, 1H), 8.59–8.49 (m, 3H), 8.33 (d, J = 8.8 Hz, 1H),

ACS Paragon Plus Environment

27

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 28 of 57

8.20 (d, J = 6.0 Hz, 1H), 8.10–8.04 (m, 1H), 7.94 (d, J = 7.6 Hz, 1H), 7.79 (d, J = 8.4 Hz, 2H), 7.71 (d, J = 8.8 Hz, 2H), 6.95 (t, J = 6.4 Hz, 1H), 2.64 (t, J = 8.0 Hz, 4H), 2.32 – 2.20 (m, 1H), 1.92 – 1.82 (m, 1H); MS m/z 434 [M+H]+; Anal. (C26H23N7O·3.94 HCl·0.26 dioxane) calcd: C, 54.12; H, 4.87; N, 16.34. Found: C, 54.12; H, 5.11; N, 16.33. N-(1-(4-(2-(2-Aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3yl)phenyl)cyclobutyl)acetamide (22). 3-(3-(4-(1-aminocyclobutyl)phenyl)-5-phenyl-3Himidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (21a) (22 mg, 0.05 mmol) was dissolved in pyridine (1.0 mL), followed by the addition of acetic anhydride (4.7 µL, 0.05 mmol). The mixture was stirred overnight at room temperature, diluted with DCM/DMF (1:1, 2 mL) and then stirred for an additional 12 h. The mixture was diluted with DMSO, filtered and purified by HPLC to afford N-(1-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5b]pyridin-3-yl)phenyl)cyclobutyl)acetamide (22) (14 mg, 57%) as a white powder after freeze drying. NMR (400 MHz, DMSO-d6) δ: 8.53 (1H, s), 8.27 (1H, d, J = 8.6 Hz), 8.03 (2H, d, J = 7.5 Hz), 8.00 (1H, dd, J = 5.2, 1.7 Hz), 7.98 (1H, d, J = 8.0 Hz), 7.54 (2H, d, J = 8.6 Hz), 7.48 (2H, t, J = 7.5 Hz), 7.43 (2H, d, J = 8.6 Hz), 7.40 (1H, t, J = 8.6 Hz), 7.13 (1H, dd, J = 8.0, 1.7 Hz), 6.99 (2H, s), 6.38 (1H, dd, J = 7. 5, 4.6 Hz), 2.51-2.45 (4H, m), 2.09-2.00 (1H, m), 1.921.83 (1H, m); MS m/z 475 [M+H]+. 3-(3-(4-(1-Aminocyclobutyl)phenyl)-5-(3-aminophenyl)-3H-imidazo[4,5-b]pyridin-2yl)pyridin-2-amine hydrochloride (23). HCl in dioxane (4.0 M, 1 mL) was added to a solution of N-(3-(3-(4-(1-aminocyclobutyl) phenyl)-2-(2-aminopyridin-3-yl)-3H-imidazo[4,5-b]pyridin5-yl)phenyl) acetamide (21b) (0.180 g, 0.42 mmol) in dichloromethane (5 mL) and methanol (1 mL). The reaction was capped and heated at 50ºC for 3 days. Upon completion, the reaction was diluted with ether (20 mL), and 3-(3-(4-(1-aminocyclobutyl)phenyl)-5-(3-aminophenyl)-3H-

ACS Paragon Plus Environment

28

Page 29 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

imidazo[4,5-b]pyridin-2-yl)pyridin-2-amine hydrochloride (23) was filtered from the mixture as a yellow solid (0.162 g, 87%). Mp decomposed at 240 ºC; 1H NMR (400 MHz, DMSO-d6) δ: 9.96 (bs, 3H), 8.44–8.30 (m, 3H), 8.16 (bs, 1H), 8.04 (d, J = 8.4 Hz, 1H), 8.01–8.79 (m, 2H), 7.89 (d, J = 5.2 Hz, 1H), 7.77 (d, J = 8.0 Hz, 2H), 7.68 (d, J = 8.0Hz, 2H), 7.57–7.50 (m, 1H), 7.32–7.28 (m, 1H), 6.94–6.86 (m, 1H), 2.72–2.58 (m, 4H), 2.32–2.20 (m, 1H), 1.92–1.82 (m, 1H); MS m/z 448 [M+H]+; Anal. (C27H25N7·3.73 HCl·0.17 dioxane

.

0.73 CH2Cl2) calcd: C,

51.66; H, 4.81; N, 14.84. Found: C, 51.66; H, 4.81; N, 14.85. Methyl 1-(4-((6-chloro-3-nitropyridin-2-yl)amino)phenyl)cyclobutane-1-carboxylate (24). 24 was prepared as described for 2a using 1e and methyl 1-(4-aminophenyl)cyclobutane-1carboxylate. 1H NMR (400 MHz, CDCl3) δ: 10.27 (s, 1H), 8.47 (dd, J = 8.6, 1.7 Hz, 1H), 7.63 (dd, J = 8.6, 1.1 Hz, 2H), 7.35 (dd, J = 8.6, 1.1 Hz, 2H), 6.81 (dd, J = 8.6, 1.1 Hz, 1H), 3.67 (d, J = 1.7 Hz, 3H), 2.88-2.83 (m, 2H), 2.56-2.49 (m, 2H), 2.10-2.00 (m, 1H), 1.94-1.85 (m, 1H); MS m/z 362 [M+H]+. Methyl 1-(4-((3-nitro-6-phenylpyridin-2-yl)amino)phenyl)cyclobutane-1-carboxylate (25). 25 was prepared as described for 8a using 24 and phenylboronic acid. 1H NMR (400 MHz, CDCl3) δ: 10.33 (s, 1H), 8.59 (d, J = 8.7 Hz, 1H), 8.08-8.03 (m, 2H), 7.76 (dt, J = 9.2, 2.4 Hz, 2H), 7.53-7.49 (m, 3H), 7.36 (dt, J = 8.9, 2.3 Hz, 2H), 7.31 (d, J = 8.7 Hz, 1H), 3.68 (s, 3H), 2.90-2.83 (m, 2H), 2.60-2.51 (m, 2H), 2.12-2.00 (m, 1H), 1.97-1.86 (m, 1H); MS m/z 404 [M+H]+. Methyl

1-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)phenyl)

cyclobutane-1-carboxylate (26). 26 was prepared as described for 4a using 25 and 2aminonicotinaldehyde. 1H NMR (400 MHz, DMSO-d6) δ: 8.27 (d, J = 8.6 Hz, 1H), 8.04–8.02 (m, 2H), 8.01 (dd, J = 4.9, 2.0 Hz, 1H), 7.98 (d, J = 8.6 Hz, 1H), 7.57–7.50 (m, 1H), 7.50–7.44

ACS Paragon Plus Environment

29

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 30 of 57

(m, 6H), 7.40 (tt, J = 7.2, 1.5 Hz, 1H), 7.14 (dd, J = 7.4, 1.7 Hz, 1H), 6.98 (s, 2H), 6.40 (dd, J = 7.7, 4.9 Hz, 1H), 3.64 (s, 3H), 2.81–2.75 (m, 2H), 2.55-2.51 (m, 2H), 2.04–1.94 (m, 1H), 1.92– 1.83 (m, 1H); MS m/z 476 [M+H]+. 1-(4-(2-(2-Aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)phenyl)cyclo butane-1-carboxamide (27). Methyl 1-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5b]pyridin-3-yl)phenyl) cyclobutane-1-carboxylate (26) (209 mg, 0.44 mmol) was dissolved in THF/MeOH/aq. NaOH 1 N (2:2:1 by volume, 25 mL), and the mixture was stirred for one hour at 65 °C. The reaction mixture was cooled to 0 °C and acidified with 1 N HCl (5 mL). The mixture was diluted with water and extracted with CHCl3. The organics were dried over Na2SO4 and concentrated in vacuo. The residue was treated with CH2Cl2 and hexanes, producing 1-(4-(2(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)phenyl)

cyclobutane-1-

carboxylic acid as a white powder (170 mg, 84%). 1H NMR (400 MHz, DMSO-d6) δ: 12.51 (br. s, 1H), 8.30 (d, J = 8.0 Hz, 1H), 8.06–8.03 (m, 3H), 8.00 (d, J = 8.0 Hz, 1H), 7.51–7.44 (m, 7H), 7.41 (t, J = 8.0 Hz, 1H), 7.36 (d, J = 7.4 Hz, 2H), 6.53 (dd, J = 7.7, 5.4 Hz, 1H), 2.79–2.72 (m, 2H), 2.49-2.44 (m, 2H), 2.04–1.94 (m, 1H), 1.89–1.81 (m, 1H); MS m/z 462 [M+H]+. The carboxylic acid (35 mg, 0.076 mmol) was dissolved in DMF (1 mL) and then treated with HOBt (10.3 mg, 0.076 mmol), triethylamine (32 µL, 0.23 mmol) and EDC (29 mg, 0.15 mmol). The reaction mixture was stirred at room temperature for 8 h. An ammonia solution in MeOH (7 M, 10 eq.) was added, and the mixture was stirred at room temperature for one hour. Water was then added, and the mixture was extracted with CHCl3. The organics were dried over Na2SO4 and concentrated in vacuo. The crude product was purified by HPLC (acetonitrile/HCOOH buffer). After

evaporation,

1-(4-(2-(2-aminopyridin-3-yl)-5-phenyl-3H-imidazo[4,5-b]pyridin-3-yl)

phenyl)cyclobutane-1-carboxamide (27) was obtained (15 mg, 43%) as a white solid. 1H NMR

ACS Paragon Plus Environment

30

Page 31 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

(400 MHz, DMSO-d6) δ: 8.27 (d, J = 8.0 Hz, 1H), 8.03 (d, J = 8.0 Hz, 2H), 8.01 (dd, J = 4.6, 1.7 Hz, 1H), 7.98 (d, J = 8.0 Hz, 1H), 7.51–7.44 (m, 6H), 7.40 (tt, J = 7.2, 1.5 Hz, 1H), 7.29 (s, 1H), 7.17 (dd, J = 7.4, 1.7 Hz, 1H), 6.96 (s, 3H), 6.40 (dd, J = 7.7, 4.9 Hz, 1H), 2.78–2.71 (m, 2H), 2.42-2.36 (m, 2H), 1.91–1.73 (m, 2H); MS m/z 461 [M+H]+. General Experimental Details Interference compounds: All test compounds passed the PAINS filter. The screening was performed by Molecular Forecaster as part of a computational analysis of the entire ArQule Compound Library. Protein expression and purification: Full-length AKT isoform constructs (AKT1 (2-480), AKT2 (2-481) and AKT3 (2-479)) and ∆PH-AKT1 (144-480) were expressed in Sf9 cells using a baculovirus vector. The frozen cell pellets were thawed and re-suspended in lysis buffer containing 25 mM Tris, pH 8.0, 100 mM NaCl, 25 mM imidazole, 10% glycerol, and protease inhibitors (Sigma #S8820). Cells were lysed by sonication, the lysate was centrifuged, and the clarified supernatant was loaded onto a Ni-NTA affinity column. Following washing with buffer containing 25 mM Tris, pH 8.0, 500 mM NaCl, and 25 mM imidazole, the protein was eluted in buffer containing 25 mM Tris, 100 mM NaCl, and 400 mM imidazole, pH 8.0. The protein was concentrated and purified on a Superdex 200 gel-filtration column. The concentrated protein (10 mg/ml) was stored in buffer containing 25 mM Tris, pH 8.0, 100 mM NaCl, and 10% glycerol at -80 °C. Protein Characterization (AKT1, AKT2 and AKT3).Phosphorylation at Thr308 and Ser473 in AKT1 (1-480) was analyzed as described below. The proteins were subjected to solutionphase digestion, and peptide phosphorylation was determined by LC/MS and LC/MS/MS analysis. Proteins (50 µg) were diluted in 50 mM ammonium bicarbonate buffer, pH 8,

ACS Paragon Plus Environment

31

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 32 of 57

containing 5 mM DTT, 3 M urea, 5% acetonitrile and endoprotease (trypsin, 1:20 w/w or GluC, 1:10 w/w ratio) and digested overnight. The digests were separated on a BEH C18 column (1.0 x 50 mm, 1.7 µm) equilibrated at 40 °C and mass analyzed on a QTOF mass spectrometer. Elution was performed using a water/acetonitrile gradient with a 0.1% formic acid modifier, starting from 2% and reaching 40% acetonitrile over 14 min, followed by 40 to 50% acetonitrile from 14 to 16 min, 50 to 80% acetonitrile from 16 to 18 min, held at 80% for 2 min and re-equilibrated with 2% acetonitrile for another 3 min. The MS spectra of the peptides were de-convoluted using the MaxEnt3 software package (Masslynx, Waters). For the inactive AKT proteins, no phosphorylation

was

detected

at

Thr308/Thr309/Thr305,

and

less

than

10%

of

Ser473/Ser474/Ser472 was detected as phosphorylated (in AKT1, AKT2 and AKT3, respectively). Following activation with PDK1 and MAPKAP2 in the presence of lipids, MS analysis identified 60% of Thr308 sites and 80% of Ser473 sites as being phosphorylated. Assay Descriptions: Lipid Vesicle Preparation. Lipid vesicles were prepared from PtdIns(3,4,5)P3, dipalmitoyl and a synthetic phospholipid blend of DOPS/DOPC. A 1.0 mg/mL solution of PtdIns(3,4,5)P3 and a 16.7 mg/mL suspension of DOPS/DOPC in 10 mM Hepes, pH 7.4, were prepared immediately before use. The DOPS/DOPC suspension (800 µL) and the PtdIns(3,4,5)P3 solution (964 µL) were mixed and then diluted in 18.2 mL of 10 mM Hepes, pH 7.4, and mixed well. This mixture (400 µM DOPS/400 µM DOPC/40 µM PtdIns(3,4,5)P3) was sonicated on ice for 30 sec at 75% power until the mixture clarified. Aliquots were prepared and frozen at -80 °C until use. AKT 1(1-480), AKT2(1-481) and AKT3(1-479) Alpha Screen Assays. AKT activity was assayed

using

a

GSK3-derived

biotinylated

peptide

substrate,

crosstide

(biotin-

GRPRTSSFAEG), and AlphaScreen™ (Amplified Luminescent Proximity Homogeneous

ACS Paragon Plus Environment

32

Page 33 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Assay) technology. Test compounds and controls were prepared in 10% DMSO at 10-fold the desired final concentration, and 2.5 µL of each compound was added to each well of a reaction plate (Corning 96-well half-area solid white nonbinding surface plate). Full-length unphosphorylated AKT was diluted in assay buffer (50 mM Tris, pH 8.0, 0.02 mg/mL BSA, 10 mM MgCl2, 1 mM EGTA, 10% glycerol, 0.2 mM Na3VO4, 1 mM DTT, 0.1 mM βglycerophosphate, and 0.2 mM NaF) and added to each well at a volume of 17.5 µL for a final concentration of 8 nM (AKT1), 63 nM (AKT2), or 13 nM (AKT3) in the 25 µL reaction. After a 20-min pre-incubation at room temperature, the kinase reaction was initiated by the addition of 5 µL of the activation mixture diluted in assay buffer, containing biotinylated crosstide, PDK1, MAPKAPK2, DOPS/DOPC, PtdIns(3,4,5)P3, and ATP for a final concentration of 60 nM biotinylated crosstide, 0.1 nM (AKT1, AKT3) or 0.3 nM (AKT2) PDK1, 0.7 nM (AKT1), 1.3 nM (AKT2), or 0.4 nM (AKT3) MAPKAPK2, 5.5 µM DOPS, 5.5 µM DOPC, 0.5 µM PtdIns(3,4,5)P3, and 50 µM (AKT1, AKT2) or 18 µM (AKT3) ATP. The plates were incubated for 30 min at room temperature, and the reactions were stopped in the dark by the addition of 10 µL of stop/detection mixture prepared in assay buffer, containing EDTA, AlphaScreen™ Streptavidin Donor and Protein A acceptor beads, and phospho-AKT substrate antibody at final concentrations of 10 mM EDTA, 500 ng/well of both AlphaScreen™ Streptavidin donor beads and Protein A acceptor beads, and phospho-AKT substrate antibody at a final dilution of 1:350. Assay plates were incubated for 90 min at room temperature in the dark, and the plates were read on a Perkin Elmer Envision Multilabel plate reader (excitation wavelength: 640 nm, emission wavelength: 570 nm). All IC50 values reported are the geometric mean of at least n = 2 determinations.

ACS Paragon Plus Environment

33

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 34 of 57

In vitro Western Blot Pharmacodynamic Assay (p-Ser473, p-Thr308, p-PRAS40). Cellular activity was determined by measuring the phosphorylation status of Ser473, Thr308 and the AKT substrate p-PRAS40 using A2780 and AN3CA cell lines. A2780 and AN3CA cells were plated in 6-well plates at 60-75% confluency and incubated at 37 °C overnight in 5% CO2. Upon reaching 75-90% confluency, the cells were treated with the test compound, following a threefold dilution scheme, for one hour with a final DMSO concentration of less than 0.2% v/v. Cells were stimulated with 100 ng/mL EGF and 100 nM insulin for fifteen minutes. The medium was removed, and 150 µL of 1X E-Page Loading Buffer (Cat#EPBUF-01, Invitrogen) was added. Cells were scraped and transferred to a deep-well 96-well plate and lysed by sonication at medium power four to six times in 30-sec bursts. Samples were run on EPage™ gels and transferred to PVDF membranes using the iBlot™ system (Invitrogen). Membranes were washed for 3 min in dH2O, blocked for 30 min in Odyssey Blocking Buffer (Cat#927-40000, LiCor), and then incubated overnight at 4 °C in Odyssey Blocking/TBST Buffer (50 mM Tris, pH 7.4, 150 mM NaCl, and 0.05% Tween 20) (1:3) with antibodies against p-AKT (Cat#9271 and Cat#9275, Cell Signaling Technology), phospho-PRAS40 (Cat#2640, Cell Signaling Technology), and βactin (Cat#A2228, Sigma). After three washes for 5 min each in TBST buffer, the membranes were incubated with the appropriate secondary antibodies labeled with near-infrared or Alexa Fluor dyes (Cat#611-132-122 goat anti-rabbit IgG H+L, Cat#610-132-121 goat anti-mouse IgG H+L, Rockland (Cat#A21076 goat anti-rabbit IgG H+L, Cat#A21057 goat anti-mouse IgG H+L, Molecular Probes). After a one-hour incubation, the membranes were washed three times for five minutes each and then scanned using an Odyssey infrared scanner (LiCor). The intensities of the bands were quantified using the accompanying software. The data were normalized to the

ACS Paragon Plus Environment

34

Page 35 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

untreated controls, the dose-response curves were fitted to a four-parameter logistic equation, and the IC50 values were determined. Cellular Anti-proliferation Assay (MTS). Anti-proliferative cellular assays were conducted using the CellTiter Non-Radioactive Cell Proliferation Assay developed by Promega, which utilizes the production of formazan from a tetrazolium compound by live cells. AN3CA and A2780 cells were obtained from the ATCC. AN3CA cells were cultured in DMEM, and A2780 cells were cultured in RPMI supplemented with 10% FBS, 100 units/mL penicillin, 100 µg/mL streptomycin, and 2 mM glutamine at 37 °C under 5% CO2. Cells were plated in 96-well plates at 2,000-10,000 cells/well, cultured for 24 h, and treated with the test compound for 72 h at a final DMSO concentration no greater than 0.5% v/v. PMS stock reagent (0.92 mg/mL in DPBS) was diluted 20-fold in MTS stock reagent (2 mg/mL in DPBS), and this MTS/PMS mixture was diluted 5-fold into each well of the 96-well plate. The plates were incubated for 3-4 h, and the absorbance of formazan was measured at 490 nm. The data were normalized to the untreated controls, the dose-response curves were fit to a four-parameter logistic equation, and the IC50 values were determined. All IC50 values reported are the geometric mean of at least two independent determinations. CYP450 Inhibition Assay. Human liver microsomes (0.25 mg/mL), probe substrates [3 µM midazolam (3A4), 5 µM bufuralol (2D6), 100 µM tolbutamide (2C9), 10 µM paclitaxel (2C8), 80 µM S-mephenytoin (2C19), and 50 µM phenacetin (1A2)], 3.3 mM MgCl2, 1 mM NADPH, and the compound (0.1 - 10 µM) dissolved in DMSO (0.1% final) were incubated for 10 min, after which acetonitrile containing reserpine (internal standard) was used to stop the reaction. The solvents were evaporated under a constant stream of nitrogen gas at 35 °C, and the resulting compound was reconstituted in 100 µL of water for LC/MS/MS analysis. An inhibitors cocktail

ACS Paragon Plus Environment

35

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 36 of 57

consisting of 0.5 µM ketoconazole (3A4), 1 µM sulfaphenazole (2C9), 1 µM quinidine (2D6), 2 µM quercetin (2C8), 1 µM nootkatone (2C19), and 0.5 µM α-naphthoflavone (1A2) was used as a positive control. Incubations containing only DMSO (no compound) served as the 100% activity control. The percent inhibition was calculated based on the signal for the 100% activity control, and the IC50 values were either estimated or determined using fit-model 205 (one-site dose response) in XLfit4 (Guildford, Surrey, UK). Cross-species NADPH-dependent Microsomal Stability Assay. Human, CD-1 mouse and Beagle dog liver microsomes (0.25 mg/mL), 3.3 mM MgCl2 and a NADPH-regenerating system (0.4 units/mL G6PDH, 1.3 mM NADP+, and 3.3 mM G6P) were incubated with 1 µM of compound for 0, 3, 6, 10, 15, or 30 min. The incubations were stopped with acetonitrile containing warfarin (internal standard), and the samples were analyzed by LC/MS/MS. The peak area ratios were used to determine the percent remaining at each time point compared with time zero. The half-life values were estimated using the equation for mono-exponential decay. Midazolam and propranolol (female mouse only) were used as positive controls. Crystallization, Data Collection, and Refinement. A 6xHis-AKT1 (2-446) with a TEV protease site construct was cloned in a baculovirus vector and expressed in Sf9 cells. To aid the crystallization, three mutations were introduced on the linker region (E114A, E115A, and E116A) in the AKT1 (2-446) construct. The protein was purified using a similar protocol as described above for the AKT isoforms and the 6xHis tag was removed using TEV protease. Cocrystals of 21a were obtained with the following conditions: 16% butanol, 10mM ammonium sulfate, 0.1% 2-mercaptoethanol, 15% ethylene glycol, 50 mM Tris, pH 7.5. Diffraction data were collected at NSLS on the X29 beamline, and the data were processed using Mosflm and scaled using Scala. The structure was solved by molecular replacement using the Phaser program

ACS Paragon Plus Environment

36

Page 37 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

with search models consisting of AKT2 (1MRV) and the AKT1 PH domain (2UVM). The initial model was built using ARP/wARP program, and the model was subsequently improved through iterative cycles of manual model building with Coot and refinement with ARP/wARP or Refmac5. PDB ID code: 21a bound to AKT1, 5KCV

Author Information Corresponding Author *Phone: 781-994-0625. Email: [email protected] Present/current author addresses: Y. Liu and N. Westlund, X-Chem Pharmaceuticals, 100 Beaver St., Waltham, MA 02453; C.O.Bull, Kanyos Bio, 1 Kendall Sq., Cambridge, MA 02139; S. Cornell-Kennon, AssayQuant Technologies, Inc., 260 Cedar Hill St., Marlboro, MA 01752; E. W. Kelleher, Mersana Therapeutics, 840 Memorial Dr., #4, Cambridge, MA 02139; S. Koerner, BIDMC-Harvard, 330 Brookline Av., DA-0871C, Boston, MA 02215; S. Makhija, Tetraphase Pharmaceuticals, 480 Arsenal St., Watertown, MA 02472; A. Matsuda, Kitasato Daiichi Sankyo Vaccine Co., 6-111, Arai, Kitamoto-shi, Saitama 364-0026, Japan; N. Namdev, Tokai Pharmaceuticals, 255 State St., Boston, MA 02109; J. Szwaya, Tulane University – Medical School, 1430 Tulane Av., New Orleans, LA 70112; H. Wu, CreaGen Biosciences, 23 Rainin Rd., Woburn, MA 01801. Notes The authors declare no competing financial interest.

ACS Paragon Plus Environment

37

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 38 of 57

Abbreviations Used mTOR, mammalian target of rapamycin; PTEN, phosphatase and tensin homolog; PH, pleckstrin homology; PRAS40, proline-rich AKT substrate, 40 kDa; PDK1, phosphoinositide-dependent kinase 1; mTORC2, mammalian target of rapamycin complex 2; HM, hydrophobic motif; MAPKAPK2, mitogen-activated protein kinase activated protein kinase 2; ELSD, evaporative light scattering detector; DIEA, diisopropylethylamine; HOBt, hydroxybenzotriazole; EDC, 1ethyl-3-(3-dimethylaminopropyl)carbodiimide; HCl, hydrochloric acid; QTOF, quadrupole-timeof-flight; DOPS, 1,2-dioleoyl-sn-glycero-3-phospho-L-serine; DOPC, 1,2-dioleoyl-sn-glycero-3phosphocholine; HEPES, 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid; GSK-3, glycogen synthase kinase 3; EGTA, ethylene glycol tetraacetic acid; FBS, fetal bovine serum; MTS, (3(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium); PMS, phenazine methosulfate; HLM, human liver mcrosome; MLM, mouse liver microsome; DLM, dog liver microsome; M, male; F, female; DPBS, Dulbecco’s phosphate-buffered saline; TEV, tobacco etch virus. References 1.

(a) Scheid, M. P.; Woodgett, J. R., PKB/AKT: functional insights from genetic models.

Nat. Rev. Mol. Cell. Biol. 2001, 2 (10), 760-768; (b) Franke, T. F., PI3K/Akt: getting it right matters. Oncogene 2008, 27 (50), 6473-6488. 2.

(a) Altomare, D. A.; Testa, J. R., Perturbations of the AKT signaling pathway in human

cancer. Oncogene 2005, 24 (50), 7455-7464; (b) Porta, C.; Paglino, C.; Mosca, A., Targeting PI3K/Akt/mTOR signaling in cancer. Front. Oncol. 2014, 4 (64), 1-11; (c) Mayer, I. A.; Arteaga, C. L., The PI3K/AKT pathway as a target for cancer treatment. Annu. Rev. Med. 2016, 67, 11-28.

ACS Paragon Plus Environment

38

Page 39 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

3.

(a) Bhutani, J.; Sheikh, A.; Niazi, A. K., Akt inhibitors: mechanism of action and

implications for anticancer therapeutics. Infect. Agent Cancer 2013, 8 (1), 1-4; (b) Dienstmann, R.; Rodon, J.; Serra, V.; Tabernero, J., Picking the point of inhibition: a comparative review of PI3K/AKT/mTOR pathway inhibitors. Mol. Cancer Ther. 2014, 13 (5), 1021-1031. 4.

Nitulescu, G. M.; Margina, D.; Juzenas, P.; Peng, Q.; Olaru, O. T.; Saloustros, E.; Fenga,

C.; Spandidos, D.; Libra, M.; Tsatsakis, A. M., Akt inhibitors in cancer treatment: the long journey from drug discovery to clinical use (Review). Int. J. Oncol. 2016, 48 (3), 869-885. 5.

Ashwell, M. A.; Brassard, C.; Filikov, A.; Hill, J.; Koerner, S.; Lapierre, J. M.; Liu, Y.;

Namdev, N.; Nicewonger, R.; Palma, R.; Tandon, M.; Vensel, D.; Matsuda, A.; Iimura, S.; Yamamoto, Y. Substituted imidazopyridinyl-aminopyridine compounds. WO 2011082270 2011. 6.

Yu, Y.; Savage, R. E.; Eathiraj, S.; Meade, J.; Wick, M. J.; Hall, T.; Abbadessa, G.;

Schwartz, B., Targeting AKT1-E17K and the PI3K/AKT pathway with an allosteric AKT inhibitor, ARQ 092. PLoS One 2015, 10 (10), 1-26. 7.

Lindhurst, M. J.; Yourick, M. R.; Yu, Y.; Savage, R. E.; Ferrari, D.; Biesecker, L. G.,

Repression of AKT signaling by ARQ 092 in cells and tissues from patients with Proteus syndrome. Sci. Rep. 2015, 5 (17162), 1-12. 8.

Ashwell, M. A.; Lapierre, J. M.; Brassard, C.; Bresciano, K.; Bull, C.; Cornell-Kennon,

S.; Eathiraj, S.; France, D. S.; Hall, T.; Hill, J.; Kelleher, E.; Khanapurkar, S.; Kizer, D.; Koerner, S.; Link, J.; Liu, Y.; Makhija, S.; Moussa, M.; Namdev, N.; Nguyen, K.; Nicewonger, R.; Palma, R.; Szwaya, J.; Tandon, M.; Uppalapati, U.; Vensel, D.; Volak, L. P.; Volckova, E.; Westlund, N.; Wu, H.; Yang, R. Y.; Chan, T. C., Discovery and optimization of a series of 3-(3phenyl-3H-imidazo[4,5-b]pyridin-2-yl)pyridin-2-amines: orally bioavailable, selective, and potent ATP-independent Akt inhibitors. J. Med. Chem. 2012, 55 (11), 5291-5310.

ACS Paragon Plus Environment

39

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

9.

Page 40 of 57

(a) Lo, M. C.; Aulabaugh, A.; Jin, G.; Cowling, R.; Bard, J.; Malamas, M.; Ellestad, G.,

Evaluation of fluorescence-based thermal shift assays for hit identification in drug discovery. Anal. Biochem. 2004, 332 (1), 153-159; (b) Pantoliano, M. W.; Petrella, E. C.; Kwasnoski, J. D.; Lobanov, V. S.; Myslik, J.; Graf, E.; Carver, T.; Asel, E.; Springer, B. A.; Lane, P.; Salemme, F. R., High-density miniaturized thermal shift assays as a general strategy for drug discovery. J. Biomol. Screen. 2001, 6 (6), 429-440. 10.

Scheid, M. P.; Woodgett, J. R., Unravelling the activation mechanisms of protein kinase

B/Akt. FEBS Lett. 2003, 546 (1), 108-112. 11.

Bozulic, L.; Hemmings, B. A., PIKKing on PKB: regulation of PKB activity by

phosphorylation. Curr. Opin. Cell. Biol. 2009, 21 (2), 256-261. 12.

All 3-(3-phenyl-3H-imidazo[4,5-b]pyridin-2yl)pyridin-2-amine compounds tested for

biochemical inhibition of PDK1 and MAPKAPK2 showed IC50 between 10-100 µM. 13.

The biochemical IC50 determination against full-length AKT1, AKT2 and AKT3 for the

test compounds described in this paper were performed at Reaction Biology (Malvern, PA). The compounds were tested in duplicate, in a 10-dose mode with 3-fold serial dilution starting at 10 or 100 µM (based on the IC50 data generated internally with the un-phosphorylated proteins), in the presence of 10 µM ATP. Curve fits were performed where the enzyme activities at the highest concentration of test compounds were less than 65% of enzyme activity relative to DMSO controls. 14.

Chang, L. C.; von Frijtag Drabbe Kunzel, J. K.; Mulder-Krieger, T.; Westerhout, J.;

Spangenberg, T.; Brussee, J.; Ijzerman, A. P., 2,6,8-trisubstituted 1-deazapurines as adenosine receptor antagonists. J. Med. Chem. 2007, 50 (4), 828-834.

ACS Paragon Plus Environment

40

Page 41 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

15.

Nielsen, L.; Lindsay, K. B.; Faber, J.; Nielsen, N. C.; Skrydstrup, T., Stereocontrolled

synthesis of methyl silanediol peptide mimics. J. Org. Chem. 2007, 72 (26), 10035-10044. 16.

The crystallographic data described here has been deposited with the Protein Data Bank

(PDB code for 21a bound to AKT1: 5KCV). 17.

Eathiraj, S.; Palma, R.; Hirschi, M.; Volckova, E.; Nakuci, E.; Castro, J.; Chen, C. R.;

Chan, T. C.; France, D. S.; Ashwell, M. A., A novel mode of protein kinase inhibition exploiting hydrophobic motifs of autoinhibited kinases: discovery of ATP-independent inhibitors of fibroblast growth factor receptor. J. Biol. Chem. 2011, 286 (23), 20677-20687. Table 1. Biochemical Results of Early Compoundsa

IC50 (µM)b

a b

Compd

R

AKT1

AKT2

AKT3

4a 4b 6

Me t-Bu CH2NH2

0.72 5.9 1.7

20 16 9.3

>100 71 >100

See Experimental Section for assay details Assay conducted with un-phosphorylated enzymes

ACS Paragon Plus Environment

41

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 42 of 57

Table 2. Structure-Activity Relationship for Substitution on the Pyridine Ringa

Compd 6 7a 7b 7c 7d 7e 9a 9b 9c 9d 9e

R1 H Me H H H H H H H H H

R2 H H Me Me H Br H H H H pyridin-3-yl

R3 H H H Me Cl H Ph 3-NHAc-Ph 4-NHAc-Ph 1H-pyrazol-4-yl H

IC50 (µM) b AKT1 AKT2 1.7 9.3 0.5 NT 0.27 5.3 >1 NT 0.27 1.9 0.32 NT 0.0037 0.033 0.013 0.024 0.072 0.079 0.017 0.014 0.036 3.5

AKT3 >100 NT >10 NT 2.6 NT 0.43 0.086 0.70 0.065 >10

a

See Experimental Section for assay details. Assay conducted with un-phosphorylated enzymes NT means Not Tested b

ACS Paragon Plus Environment

42

Page 43 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Table 3. Structure-Activity Relationship for Substitution at the Benzylic Positiona

Compd

R

AKT1

IC50 (µM) b AKT2

9a

NH2

0.0037

0.033

0.43

17

0.0054

NT

NT

21a

0.0027

0.014

0.0081

22

0.035

NT

NT

26

0.54

NT

NT

27

0.035

NT

NT

AKT3

a

See Experimental Section for assay details. Assay conducted with un-phosphorylated enzymes NT means Not Tested b

ACS Paragon Plus Environment

43

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 44 of 57

Table 4. Structure-Activity Relationship 5-Substituted Analogsa H2N N R

N

N

N

NH2 IC50 (µM) for un-phosphorylated and phosphorylated forms of AKT isoforms Compd

R

AKT1 Active Inactive

AKT2 Active Inactive

AKT3 Inactive

Active

21a

0.0027

0.0050

0.014

0.0045

0.0081

0.016

21b

0.0028

0.0023

0.0071

0.0032

0.0054

0.022

23

0.0019

0.0026

0.0054

0.0028

0.0040

0.0090

21c

0.006

0.034

0.0025

0.036

0.026

0.34

ACS Paragon Plus Environment

44

Page 45 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Table 5. In Vitro Anti-Proliferative Activity of Selected Compoundsa

Compd

A2780

9a 21a 21b 23 21c

7.5 0.73 1.4 0.18 14

MTS cell proliferation, IC50 (µM) AN3CA IGROV-1 13 0.71 1.6 0.59 6.1

7.5 0.21 0.16 NT 0.40

LNCAP NT 0.90 1.5 0.13 13

a

See Experimental Section for assay details. NT means Not Tested

ACS Paragon Plus Environment

45

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 46 of 57

Table 6. In Vitro Cellular PD of Selected Compounds in AN3CA Cellsa Compd 21a 21b 21c a b

p-AKT (S473) IC50 (µM) 0.040 0.041b 0.056

p-AKT (T308) IC50 (µM) 0.061 0.037b 0.063

p-PRAS40 (T246) IC50 (µM) 0.31 > 3.0b 0.64

See Experimental Section for assay details. In A2780 cell line.

ACS Paragon Plus Environment

46

Page 47 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Table 7. In Vitro ADME Properties of Selected Compoundsa Compd

9a 9b 21a 21b 23 21c

CYP 450, IC50 (µM) 1A2 >10 >10 20 >10 >20 >20

2C8 >10 >20 20 1-10 >20 >20

2C9 20 10

2C19 5 8.0 >10 >20 NT

2D6 >10 >20 15 1-10 >20 11

3A4 >10 >20 20 >10 >20 18

Liver microsomal stability at 1.0 µM T1/2 (min) HLM MLM (F/M) DLM (F/M) 39 NT NT NT 45 / >60 >60 / >60 55 18 / 17 28 / 31 >60 >60 / >60 50 / >60 >60 >60 / >60 >60 / >60 >30 37 / 31 21 / >30

Solubility (µM) 188 ≥200 170 160 138 178

a

See Experimental Section for assay details. NT means Not Tested

ACS Paragon Plus Environment

47

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 48 of 57

Table 8. In vivo Pharmacokinetic and Pharmacodynamic Results for 21a in Tumor Bearing Mice (AN3CA Cell Line)a

a

% inhibition p-AKT p-PRAS40 (T308) (T246)

plasma concn (µM)

tumor concn (µM)

57.7

2.1

21.0

96.3

35.9

0.26

9.6

99.2

93.3

50.5

2.7

35.8

99.7

90.8

42.5

1.0

27.4

po dose (mg/kg)

time (h)

p-AKT (S473)

100

1

99.2

95.0

100

8

98.6

200

1

200

8

See Experimental Section for assay details.

ACS Paragon Plus Environment

48

Page 49 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Table 9. Single Dose Pharmacokinetic Results for 21a in Rats and Monkeys PK Parameters

Rats (5 mg/kg)*

Monkeys (10 mg/kg)*

Tmax (hr)

8.0

4.3

t1/2 (hr)

17

7

Cmax (ng/mL)

198

258

AUCinf(hr*ng/mL)

5496

2960

F (%)

62

49

*Dosed in a solution formulation (compound 21a in 0.01 M phosphoric acid)

ACS Paragon Plus Environment

49

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 50 of 57

Figure 1. Co-crystal structure of 21a with AKT1 (PDB accession code 5KCV). Compound 21a binds to the allosteric pocket formed by the kinase and PH domains. The amino-pyrimidine group of the core moiety forms a bidentate hydrogen bonding interaction with the main chain atoms of loop of β4-strand and αC-helix. The phenylcyclobutylamine side chain associates with the conserved YRD motif of kinase domain by polar and non-polar interactions.

ACS Paragon Plus Environment

50

Page 51 of 57

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ACS Paragon Plus Environment

51

Journal of Medicinal Chemistry

Page 52 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ACS Paragon Plus Environment

52

Page 53 of 57

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ACS Paragon Plus Environment

53

Journal of Medicinal Chemistry

Page 54 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ACS Paragon Plus Environment

54

Page 55 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Scheme 5a NO2 Cl

N

a

Cl

H2N

NO2 Cl

NH

N

Cl

NHR4

1e

H 2N c

N

d e

R3

N

N d f NHR4

d

N

N

N

NHR4

18 R4 = tert-butoxycarbonyl

N

N

b

19 R4 = tert-butoxycarbonyl

20a R3 = phenyl, R4 = tert-butoxycarbonyl 21a R3 = phenyl, R4 = H (ARQ 092) 22 R3 = phenyl, R4 = acetyl 20b R3 = 3-phenylacetamide, R4 = tert-butoxycarbonyl 21b R3 = 3-phenylacetamide, R4 = H 23 R3 = 3-aminophenyl, R4 = H 20c R3 = 3-pyridinyl, R4 = tert-butoxycarbonyl 21c R3 = 3-pyridinyl, R4 = H

20(a-c) a

Reagents and conditions: (a) tert-butyl (1-(4-aminophenyl)cyclobutyl)carbamate, DIEA, DMSO or 1,4-dioxane, 80oC, overnight; (b) 2-amino-nicotinaldehyde, Na2S2O4, DMSO, MeOH, 100oC, overnight; (c) substituted phenyl boronic acid, Pd(PPh3)4, NaHCO3 aq., EtOH, toluene, 100oC, overnight; (d) 4.0 M HCl in 1,4-dioxane, 1,4-dioxane, room temperature, overnight; (e) ; (f) 4.0 M HCl in 1,4-dioxane, 1,4-dioxane, MeOH, 50 oC, 3 days

ACS Paragon Plus Environment

55

Journal of Medicinal Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 56 of 57

Scheme 6a NO2 N

Cl

NO2

a

Cl

Cl

N

NO2

b

NH

N

NH

CO2Me

CO2Me

24

1e

25 H2 N N

c N

H2N N

N

d, e

N

N

CO2Me 26

N

N

C(O)NH2 27

a

Reagents and conditions: (a)methyl 1-(4-aminophenyl)cyclobutane-1-carboxylate , DIEA, EtOH, 45oC, overnight; (b) phenyl boronic acid, Pd(PPh3)4, NaHCO3 aq., EtOH, toluene, 100oC, overnight; (c) 2-amino-nicotinaldehyde, Na2S2O4, DMSO, MeOH, 100oC, overnight; (d) NaOH 1N, THF, MeOH, 65oC; (e) EDC, HOBt, TEA, ammonia, DMF

ACS Paragon Plus Environment

56

Page 57 of 57

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of Medicinal Chemistry

Table of Content Graphic

ACS Paragon Plus Environment

57