Subscriber access provided by University of Newcastle, Australia
Article
Quantitation of Acyl Chain Oxidation Products Formed upon Thermo-Oxidation of Phytosteryl/-stanyl Oleates and Linoleates Stefan Wocheslander, Franziska Groß, Birgit Scholz, and Karl-Heinz Engel J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.7b00424 • Publication Date (Web): 03 Mar 2017 Downloaded from http://pubs.acs.org on March 5, 2017
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Journal of Agricultural and Food Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 32
Journal of Agricultural and Food Chemistry
1 2 3
Quantitation of Acyl Chain Oxidation Products Formed upon Thermo-
4
Oxidation of Phytosteryl/-stanyl Oleates and Linoleates
5 6
Stefan Wocheslander, Franziska Groß, Birgit Scholz and Karl-Heinz Engel*
7 8
Lehrstuhl für Allgemeine Lebensmitteltechnologie, Technische Universität München,
9
Maximus-von-Imhof-Forum 2, D-85354 Freising, Germany
10 11 12
*Corresponding Author: Phone +49 (0)8161 71 4250. Fax +49 (0)8161 71 4259. E-mail:
13
[email protected] 1 ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
Page 2 of 32
14
ABSTRACT
15
A GC-based approach involving pre-separation via solid phase extraction was established for
16
the quantitation of acyl chain oxidation products (ACOPs) formed upon thermo-oxidation
17
(180 °C, 40 min) of oleates and linoleates of phytostanols and phytosterols. The
18
concentrations of ACOPs resulting from initially formed 9-hydroperoxides (octanoates, 8-
19
hydroxyoctanoates, 9-oxononanoates) were higher than those from 8-hydroperoxides
20
(heptanoates, 7-hydroxy- and 7-oxoheptanoates, 8-oxooctanoates) in both oleates and
21
linoleates. Significantly higher amounts of ACOPs were found in heat-treated linoleates
22
compared to oleates. However, despite lower thermally induced losses of stanyl oleates and
23
linoleates compared to the respective steryl esters higher concentrations of ACOPs (approx.
24
9% and 10% of the ester losses, respectively) were observed in the heat-treated stanyl esters.
25
In contrast, in the heated steryl oleates and linoleates the contribution of the ACOPs to the
26
ester losses was lower (approx. 3% and 5%, respectively), and there was a more pronounced
27
formation of oxidation products of the sterol moieties (approx. 26% and 18% of the ester
28
losses, respectively).
29 30
Keywords: Phytosteryl ester oxidation, core aldehydes, lipid autoxidation
2 ACS Paragon Plus Environment
Page 3 of 32
Journal of Agricultural and Food Chemistry
31
INTRODUCTION
32
Due to their cholesterol-lowering properties, phytosterols and phytostanols are used as
33
functional ingredients for the enrichment of various foods.1,2 For technological reasons, such
34
as the improved solubility in lipid matrices, the fatty acid esters rather than the free
35
phytosterols/-stanols are added to lipid-based foods.3 Mixtures of saturated and unsaturated
36
fatty acids derived from edible oil sources are employed for the esterification step. Similarly
37
to cholesterol and its fatty acid esters, phytosteryl/-stanyl fatty acid esters are prone to
38
oxidation reactions.4 Previous studies mainly focused on investigations of oxidation products
39
of the phytosterol moieties. There is rather detailed knowledge on the formation of the
40
principal derivatives, i.e. 7-keto, 7-hydroxy and 5,6-epoxy compounds, generally termed as
41
“phytosterol oxidation products” (POPs). Comprehensive data on the formation of POPs upon
42
heat treatment of enriched foods5 and recent reviews on daily intakes and biological effects
43
are available.6,7
44
However, phytosteryl/-stanyl esters particularly of unsaturated fatty acids are also susceptible
45
to oxidations in the fatty acid moieties. The knowledge on these types of oxidative
46
modifications has been rather limited. The formation and the degradation of stigmasteryl ester
47
hydroperoxides have been investigated.8 In another study the formation of sitosteryl and 7-
48
ketositosteryl 9,10-dihydroxystearate upon heating of a phytosteryl ester-enriched margarine
49
has been reported.9 Only recently, other acyl chain oxidation products (ACOPs) resulting
50
from thermo-oxidation of a mixture of phytosteryl/-stanyl linoleates have been identified. The
51
oxidation products covered by the employed GC-based methodology comprised three classes:
52
phytosteryl/-stanyl
53
hydroxyheptanoates,
54
oxooctanoates, 9-oxononanoates).10 Representative structures are shown in Figure 1. The
55
study provided an analytical platform to identify ACOPs of phytosteryl-stanyl fatty acid esters
56
without the need for a hydrolysis or transesterification step resulting in a loss of structural
alkanoates
(heptanoates,
8-hydroxyoctanoates)
and
octanoates),
hydroxyalkoanoates
oxoalkanoates
(7-oxoheptanoates,
(78-
3 ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
Page 4 of 32
57
information. This significantly extended the knowledge on these types of oxidation products;
58
however, quantitative data and thus an estimation of their contribution to the decreases of
59
phytosteryl/-stanyl fatty acid esters were still missing. Therefore, the objective of the present
60
study was to develop an approach for the quantitation of these ACOPs and to determine their
61
amounts upon thermal treatment of phytosteryl/-stanyl esters of unsaturated fatty acids
62
contained in mixtures commonly used to enrich foods.
63 64
MATERIALS AND METHODS
65
Chemicals and Reagents
66
A mixture of phytosterols/-stanols, named “β-sitosterol” and consisting of 75% sitosterol,
67
12% sitostanol, 10% campesterol, 2% campestanol and 1% others, was purchased from Acros
68
Organics (Morris Plains, NJ, USA). A mixture of phytostanols, named “stigmastanol” and
69
consisting of 98 % sitostanol and 2 % campestanol, was purchased from Santa Cruz
70
Biotechnology (Dallas, TX, USA). Linoleic acid (≥ 99%), oleic acid (≥ 99%), pyridine
71
(anhydrous, ≥ 99.8%), cholesterol (95%), cholesteryl palmitate (≥ 97%), 5,6β-
72
epoxycholesterol (≥ 95%), 7-ketocholesterol (≥ 90%), lactic acid (≥ 90%) and acetic
73
anhydride (≥ 99%) were purchased from Sigma-Aldrich (Steinheim, Germany). The silylation
74
reagent BSTFA/TMCS (99:1) was purchased from Supelco (Bellefonte, PA, USA). Methyl
75
tert-butyl ether (MTBE) and cyclohexane (analytical grade) were supplied by Evonik
76
Industries AG (Essen, Germany). n-Hexane (HiPerSolv Chromanorm) and chloroform
77
(AnalaR Normapur) were purchased from VWR International (Darmstadt, Germany).
78 79
Synthesis of Phytosteryl/-stanyl Oleates and Linoleates
80
The synthesis of phytosteryl/-stanyl oleates and linoleates was carried out as previously
81
described.10,11 Briefly, 100 mg of the phytosterol/-stanol sample “β-sitosterol” and of the
82
phytostanol sample “stigmastanol”, respectively, were treated as follows: 170 mg oleic or 4 ACS Paragon Plus Environment
Page 5 of 32
Journal of Agricultural and Food Chemistry
83
linoleic acid were placed in a sealed, nitrogen-flushed (in order to avoid oxidation) 2 mL glass
84
vial and heated for 25 h at 180 °C. The excess of acid was removed with 2.5 mL potassium
85
hydroxide (1 M), and the esters were extracted with 3 × 2.5 mL hexane/MTBE (3:2, v/v).
86
Final purification on a 500 mg Supelclean silica SPE column from Supelco (Bellefonte, PA,
87
USA) with cyclohexane as an eluent resulted in 107 mg phytosteryl/-stanyl oleates (yield =
88
65%), 94 mg phytostanyl oleates (yield = 58%), 79 mg phytosteryl/-stanyl linoleates (yield =
89
48%) and 72 mg phytostanyl linoleates (yield = 44%). The phytosterol/-stanol distributions
90
corresponded to those of the phytosterol/-stanol samples used for esterification. The purity of
91
the esters was determined by 1H NMR and GC-FID and was ≥ 98% for all ester mixtures.
92 93
Synthesis of Oxidized Cholesteryl Esters as Internal Standards
94
Cholesteryl octanoate and cholesteryl 9-oxononanoate were synthesized via esterification with
95
the respective acid, and cholesteryl 9-hydroxynonanoate was obtained by reduction of
96
cholesteryl 9-oxononanoate with sodium borohydride as described in a previous publication
97
for the corresponding sitosteryl esters.10 The NMR spectra of cholesteryl octanoate and
98
cholesteryl 9-oxononanoate corresponded to previously published data.12,13 The identity of
99
cholesteryl 9-hydroxynonanoate was confirmed by two-dimensional NMR of the fatty acid
100
part (13C/1H): δ 173.29 (FA-1), 63.06/3.66 (FA-9, 2H, t), 34.70/2.29 (FA-2, 2H, t), 32.71/1.58
101
(FA-8, 2H, m), 29.22/1.35 (FA-4/5/6, 2H, m), 29.22/1.35 (FA-4/5/6, 2H, m), 29.03/1.35 (FA-
102
4/5/6, 2H, m), 25.66/1.64 (FA-7, 2H, m), 25.02/1.65 (FA-3, 2H, m). No impurities were
103
observed for cholesteryl octanoate (GC-FID and 1H NMR); cholesteryl 9-oxononanoate and
104
cholesteryl 9-hydroxynonanoate had a purity of ≥ 92%.
105 106
Thermal Treatment of Phytosteryl/-stanyl Oleates and Linoleates
107
Each ester mixture (11 ± 0.2 mg) was weighed into a 2 mL brown glass vial without a lid and
108
oxidized in a heating block (VLM Metal, Bielefeld, Germany) at 180 °C for 40 min. After 5 ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
Page 6 of 32
109
cooling to room temperature, the sample was dissolved in n-hexane/MTBE (3:2, v/v) and
110
transferred to a graduated flask with a final volume of 5 mL. For each ester mixture, the
111
heating experiment was performed in triplicate (n=3).
112 113
Quantitation of Nonpolar ACOPs and Nonoxidized Phytosteryl/-stanyl Oleates and
114
Linoleates
115
An aliquot (0.5 mL) of the sample (5 mL) obtained after heat treatment was transferred into a
116
2 mL brown glass vial, and 20 µL cholesteryl octanoate (0.78 mg/mL) and 100 µL cholesteryl
117
palmitate (2.5 mg/mL) were added as internal standards. After removal of the solvent under a
118
gentle stream of nitrogen, the residue was dissolved in 250 µL hexane/MTBE (3:2, v/v). This
119
sample was directly subjected to GC-FID/MS analysis for the determination of nonpolar
120
oxidation products. Their identification was based on retention times and mass spectra as
121
previously described,10 quantitation was performed relative to the internal standard cholesteryl
122
octanoate using a response factor (Rf) of 1.0 as default value.
123
For the quantitation of nonoxidized oleates and linoleates the samples were further diluted
124
(between 1:3 and 1:8), depending on the amounts of nonoxidized esters remaining after
125
thermal treatment. Subsequently, the samples were analyzed according to a previously
126
established method based on GC-FID/MS,11 and quantitated using cholesteryl palmitate as
127
internal standard.
128 129
Quantitation of Polar ACOPs
130
An aliquot (4 ml for phytostanyl ester mixtures and 2 mL for phytosteryl/-stanyl ester
131
mixtures) of the sample (5 mL) obtained after heat treatment was transferred into a 12 mL
132
glass vial. Subsequently, the following volumes of stock solutions of the internal standards
133
cholesteryl 9-hydroxynonanoate (2.17 mg/mL) and cholesteryl 9-oxononanoate (1.03 mg/mL)
134
were added: phytostanyl oleates (10 µL and 10 µL); phytostanyl linoleates (40 µL and 20 6 ACS Paragon Plus Environment
Page 7 of 32
Journal of Agricultural and Food Chemistry
135
µL); phytosteryl/-stanyl oleates (5 µL and 5 µL); phytosteryl/-stanyl linoleates (10 µL and 10
136
µL). After removal of the solvent under a gentle stream of nitrogen, the polar oxidation
137
products were separated from nonoxidized esters by silica solid-phase extraction as described
138
recently.10 Briefly, nonoxidized esters and nonpolar oxidation products were eluted from a
139
silica SPE-cartridge with cyclohexane (fraction 1), followed by the elution of the polar
140
oxidation products with MTBE (fraction 2). The residue of the polar MTBE fraction was
141
silylated with 100 µL pyridine and 100 µL BSTFA/TMCS for 20 min at 80 °C. The silylation
142
reagent was evaporated under a gentle nitrogen stream, the residue was dissolved in 100-400
143
µL hexane/MTBE (3:2, v/v) and subjected to GC-FID/MS analysis. Identification of polar
144
oxidation products was based on retention times and mass spectra,10 quantitation was done
145
relative to the internal standards using a response factor (Rf) of 1.0 as default value.
146 147
Method Validation
148
The limits of detection (LOD) and quantification (LOQ) were determined according to the
149
method of Vogelgesang and Hädrich14 for sitosteryl octanoate, sitosteryl 9-hydroxynonanoate
150
(silylated) and sitosteryl 9-oxononanoate, as representatives of the three classes of ACOPs
151
covered by the employed methodology.10
152
Linearity in the working range was validated by establishing five point calibration curves in
153
the range from 3-73 µg/ml for cholesteryl octanoate and sitosteryl octanoate, 11-217 µg/ml
154
for cholesteryl 9-hydroxynonanoate (silylated) and sitosteryl 9-hydroxynonanoate (silylated),
155
and 10-191 µg/ml for cholesteryl 9-oxononanoate and sitosteryl 9-oxononanoate. The
156
equations of the calibration curves were determined by linear regression analysis of the peak
157
area versus the concentration of the analyte.
158
For the recovery of polar oxidation products, known amounts of sitosteryl 9-
159
hydroxynonanoate in the range of 15-82 µg and of sitosteryl 9-oxononanoate in the range of
7 ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
Page 8 of 32
160
23-115 µg were spiked to 1.5 mg sitosteryl linoleate (non-heated) in triplicate. Subsequently,
161
the samples were taken through the SPE-procedure as described above.
162
The reproducibility of the method including the thermo-oxidation and sample preparation step
163
was tested by repeated analysis of heated phytostanyl linoleates on another day by a second
164
operator in triplicate (n=3).
165 166
Quantitation of Phytosterol Oxidation Products
167
An aliquot (2 mL) of a sample (5 mL) obtained after heat treatment of β-sitosteryl oleate and
168
linoleate sample, respectively, was transferred into a 12 mL glass vial. After adding 50 µL
169
5,6ß-epoxycholesterol (0.61 mg/mL) and 50 µL 7-ketocholesterol (0.5 mg/mL) as internal
170
standards, the solvent was removed under a gentle stream of nitrogen. Transesterification,
171
extraction of phytosterol oxidation products and subsequent acetylation were performed as
172
previously described.15 The residue was dissolved in 0.3 mL of n-hexane/MTBE/isopropanol
173
(80:20:0.3, v/v/v) and subjected to on-line LC-GC analysis.15 The on-line LC-GC system
174
consisted of a 1220 Infinity LC, which was coupled to a 7890A GC equipped with a flame
175
ionization (FID) via a 1200 Infinity series 2-position/6-port switching valve (Agilent
176
Technologies, Böblingen, Germany). Evaporation of the solvent was performed via the
177
temperature programmable multimode inlet (MMI) in the programmable temperature
178
vaporizer (PTV) solvent vent mode. Identification was based on relative retention times and
179
mass spectra of acetylated phytosterol oxidation products, quantification was done using
180
response factors relative to the respective internal standard (1.0 for 5,6-epoxy- and 7-
181
ketophytosterols and 1.2 for 7-hydroxyphytosterols).
182
According to the procedures described above, the synthesized phytosteryl/-stanyl oleates and
183
linoleates were also analyzed regarding the presence of ACOPs and POPs before the thermal
184
treatments.
185
8 ACS Paragon Plus Environment
Page 9 of 32
Journal of Agricultural and Food Chemistry
186
GC-FID Analysis
187
Analysis was performed using a 6890N GC equipped with an FID (Agilent Technologies,
188
Böblingen, Germany). The separations were carried out on a 30 m × 0.25 mm i.d., 0.1 µm
189
film, Rtx-200MS fused silica capillary column (Restek, Bad Homburg, Germany). The
190
temperature of the injector was set to 280 °C, and hydrogen was used as carrier gas with a
191
constant flow rate of 1.5 ml/min. The split flow was set to 11 ml/min, resulting in a split ratio
192
of 1:7.5. The oven temperature was programmed as follows: Initial temperature, 100 °C;
193
programmed at 15 °C/min to 310 °C (2 min), then 1.5 °C/min to 340 °C (3 min). The FID
194
temperature was set to 340 °C and nitrogen was used as a makeup gas with a flow rate of 25
195
ml/min. The injection volume was set to 1 µL. Data acquisition was performed by
196
ChemStation B.04.03.
197 198
GC-MS Analysis
199
Mass spectra were recorded with a Finnigan Trace GC ultra coupled with a Finnigan Trace
200
DSQ mass spectrometer (Thermo Electro Corp., Austin, Texas, USA). Mass spectra were
201
obtained by positive electron impact ionization at 70 eV in the scan mode at unit resolution
202
from 40 to 750 Da. The interface was heated to 330 °C and the ion source to 250 °C. Helium
203
was used as carrier gas with a constant flow rate of 1.0 ml/min. The other GC conditions were
204
the same as described for GC-FID analysis. Data acquisition was perfomed by Xcalibur 3.063
205
software.
206 207
NMR Spectroscopy
208
The compounds under study were dissolved in 0.5 mL deuterated chloroform. 1H NMR and
209
13
210
500 spectrometers operating at 27 °C. 1H-Detected experiments including two-dimensional
211
COSY, NOESY, HSQC and HMBC were measured with an inverse 1H/13C probehead, direct
C NMR spectra were recorded at 500 MHz and 126 MHz, respectively with Avance-HD
9 ACS Paragon Plus Environment
Journal of Agricultural and Food Chemistry
212
13
213
experiments were done in full automation using standard parameter sets of the TOPSPIN 3.2
214
software package (Bruker, Billerica, MA, USA).
215
decoupled mode. Data processing was done with the MestreNova software.
C-measurements were performed with a QNP
13
13
Page 10 of 32
C/31P/29Si/19F/1H cryoprobe. All
C NMR spectra were recorded in proton-
216 217
Statistical Analysis
218
The software RStudio (version 0.99.903) was used for statistical analyses. Statistical
219
differences were evaluated by one-way ANOVA and unpaired Student’s t-test, respectively.
220
Levels of significance: p < 0.001, highly significant (***); p < 0.01, very significant (**); p