Regioselective Preferential Nucleophilic Addition of N-Heterocycles

Feb 7, 2012 - (7, 8) Since, the discovery of coupling of aryl/heteroaryl halides with N-heterocycles ... documented in the literature and these proced...
1 downloads 0 Views 659KB Size
ORGANIC LETTERS

Regioselective Preferential Nucleophilic Addition of N-Heterocycles onto Haloarylalkynes over N-Arylation of Aryl Halides

2012 Vol. 14, No. 4 1106–1109

Megha Joshi,† Rakesh Tiwari,‡ and Akhilesh Kumar Verma*,† Synthetic Organic Chemistry Research Laboratory, Department of Chemistry, University of Delhi, Delhi 110007, India, and Department of Biomedical & Pharmaceutical Sciences, College of Pharmacy, University of Rhode Island, Kingston, Rhode Island 02881, United States [email protected] Received January 5, 2012

ABSTRACT

The study of preferential addition of heterocyclic amines onto halo-substituted arylalkynes over N-arylation under various catalytic conditions is described. The present work supports and confirms the mechanistic pathway of our recent work on the tandem synthesis of indolo- and pyrrolo-[2,1-a]isoquinolines via hydroamination followed by oxidative addition and not vice versa.

Heterocyclic nitrogen-containing substrates are common constituents of natural products, agrochemicals, and pharmaceuticals and are also useful intermediates in a †

University of Delhi. University of Rhode Island. (1) (a) Lawrence, S. A. In Amines: Synthesis, Properties, and Applications; Cambridge University Press: New York, 2004. (b) Brossi, A. In The Alkaloids: Chemistry and Pharmacology Cordell, G. A., Eds.; Academic Press: San Diego, 1993; Vol. 43, pp 119183. (c) Daly, J. W.; Garraffo, H. M.; Spande, T. F. In The Alkaloids: Chemistry and Pharmacology; Cordell, G. A., Eds.; Academic Press: San Diego, 1993; Vol. 43, pp 185288. (2) (a) Stork, G.; Brizzolara, A.; Landesman, H.; Szmuszkovicz, J.; Terrell, R. J. Am. Chem. Soc. 1963, 85, 207–222. (b) Stork, G. Med. Res. Rev. 1999, 19, 370–387. (c) Cossy, J.; Belotti, D.; Bellosta, V.; Boggio, C. Tetrahedron Lett. 1997, 38, 2677–2683. (3) For recent reviews, see: (a) M€ uller, T. E.; Beller, M. Chem. Rev. 1998, 98, 675–703. (b) Severin, R.; Doye, S. Chem. Soc. Rev. 2007, 36, 1407–1420. (c) M€ uller, T. E.; Hultzsch, K. C.; Yus, M.; Foubelo, F.; Tada, M. Chem. Rev. 2008, 108, 3795–3892. (d) Hesp, K. D.; Stradiotto, M. Chem. Cat. Chem. 2010, 2, 1192–1207 and references cited therein. (e) Seayad, J.; Tillack, A.; Hartung, C. G.; Beller, M. Adv. Synth. Catal. 2002, 344, 795–813. (4) (a) Zhang, Z.; Leitch, D.; Lu, C. M.; Patrick, B. O.; Schafer, L. L. Chem.;Eur. J. 2007, 13, 2012–2022. (b) Heutling, A.; Pohlki, F.; Doye, S. Chem.;Eur. J. 2004, 10, 3059–3071. (c) Ackermann, L. Organometallics 2003, 22, 4367–4368. (d) Tillack, A.; Castro, I. G.; C. Hartung, G.; Beller, M. Angew. Chem., Int. Ed. 2002, 41, 2541–2543. (e) Walsh, P. J.; Baranger, A. M.; Bergman, R. G. J. Am. Chem. Soc. 1992, 114, 1708– 1719. (f) Leitch, D. C.; Payne, P. R.; Dunbar, C. R.; Schafer, L. L. J. Am. Chem. Soc. 2009, 131, 18246–18247. ‡

10.1021/ol203491p r 2012 American Chemical Society Published on Web 02/07/2012

number of industrial processes.1,2 Several synthetic methods have been described for the preparation of enamines, and to our knowledge, hydroamination of alkynes provides an atom-economical route to them.36 Earlier efforts to synthesize both simple and highly complex molecules by N-arylation and hydroamination of unsaturated substrates have proved to be very efficient.2 Synthesis of substituted indoles and analogous heterocyclic substrates using arylation/hydroamination chemistry has been well established in the literature.68 A remarkable progress has been made in tandem synthesis of substituted indoles from o-haloanilines by Sonogashira coupling followed by intramolecular hydroamination.6 (5) Hesp, K. D.; Stradiotto, M. J. Am. Chem. Soc. 2010, 132, 18026– 18029 and references cited therein. (6) (a) Tzalis, D.; Koradin, C.; Knochel, P. Tetrahedron Lett. 1999, 40, 6193–6195. (b) Rodriguez, A.; Koradin, C.; Dohle, W.; Knochel, P. Angew. Chem., Int. Ed. 2000, 39, 2488–2490. (c) Koradin, C.; Dohle, W.; Rodriguez, A.; Schmid, B.; Knochel, P. Tetrahedron. 2003, 59, 1571– 1587. (d) Imahori, T.; Hori, C.; Kondo, Y. Adv. Synth. Catal. 2004, 346, 1090–1092. (e) Sakamoto, T.; Kondo, Y.; Iwashita, S.; Yamanaka, H. Chem. Pharm. Bull. 1987, 5, 1823–1828. (f) Sakamoto, T.; Kondo, Y.; Iwashita, S.; Nagano, T.; Yamanaka, H. Chem. Pharm. Bull. 1988, 4, 1305–1308. (g) Sakamoto, T.; Kondo, Y.; Yamanaka, H. Heterocycles 1986, 24, 31–32. (h) Iritani, K.; Matsubara, S.; Utimoto, K. Tetrahedron Lett. 1988, 29, 1799–1802.

A notable work has been reported by Knochel in 2000 (eq 1).6b Recently, Ackermann7 and Alsabeh8 (eq 2) showed the synthesis of indoles from o-haloarylalkynes and anilines via arylation followed by intramolecular hydroamination.7,8 Since, the discovery of coupling of aryl/heteroaryl halides with N-heterocycles and arylamines using metal and ligands is well documented in the literature and these procedures are known for the tolerance of variety of functional groups,9 study of the nucleophilic addition or arylation of N-heterocycles and halo-substituted arylalkynes remains elusive. In this context, preferential addition of heterocyclic amines to haloalkynes over arylation reactions would be of great interest to synthetic chemists.

In continuation of our interest in the coupling reactions10 and synthesis of fused heterocycles,11 we recently reported the copper-catalyzed tandem synthesis of indoloand pyrrolo[2,1-a]isoquinolines. In the proposed mechanism, we have shown two possible routes for the generation of the key intermediate R (Scheme 1).11a Herein, we report that nucleophilic addition of heterocyclic amines onto halo-substituted arylalkynes is preferred over N-arylation. (7) (a) Ackermann, L.; Song, W.; Sandmann, R. J. Organomet. Chem. 2011, 696, 195–201. (b) Ackermann, L. Org. Lett. 2005, 7, 439– 442. (c) Kaspar, L. T.; Ackermann, L. Tetrahedron 2005, 61, 11311– 11316. (d) Ackermann, L.; Sandmann, R.; Kondrashov, M. V. Synlett 2009, 8, 1219–1222. (e) Ackermann, L.; Barfußer, S.; Potukuchi, H. K. Adv. Synth. Catal. 2009, 346, 1064–1072. (8) Alsabeh, P. G.; Lundgren, R. J.; Longobardi, L. E.; Stradiotto, M. Chem. Commun. 2011, 47, 6936–6938. (9) (a) Jiang, L.; Buchwald, S. L. In Palladium-Catalyzed Aromatic CarbonNitrogen Bond Formation in Metal-Catalyzed Cross-Coupling Reactions; De Meijere, A., Diederich, F., Eds.; Wiley-VCH: Weinheim, 2004; pp 699760. (b) Corbet, J. P.; Mignani, G. Chem. Rev. 2006, 106, 2651–2710. (c) Ley, S. V.; Thomas, A. W. Angew. Chem., Int. Ed. 2003, 42, 5400–5499 and references cited therein. (10) (a) Verma, A. K.; Singh, J.; Sankar, V. K.; Chaudhary, R.; Chandra, R. Tetrahedron Lett. 2007, 48, 4207–4210. (b) Verma, A. K.; Singh, J.; Chaudhary, R. Tetrahedron Lett. 2007, 48, 7199–7202. (c) Verma, A. K.; Singh, J.; Larock., R. C. Tetrahedron. 2009, 65, 8434– 8439. (11) (a) Verma, A. K.; Kesharwani, T.; Singh, J.; Tandon, V.; Larock, R. C. Angew. Chem., Int. Ed. 2009, 48, 1138–1143. (b) Verma, A. K.; Joshi, M.; Singh, V. P. Org. Lett. 2011, 13, 1630–1633. (c) Verma, A. K.; Aggarwal, T.; Rustagi, V.; Larock, R. C. Chem. Commun. 2010, 46, 4064–4066. (d) Verma, A. K.; Shukla, S. P.; Singh, J.; Rustagi, V. J. Org. Chem. 2011, 76, 5670–5684. (e) Rustagi, V.; Aggarwal, T.; Verma, A. K. Green Chem. 2011, 13, 1640–1643. (f) Aggarwal, T.; Imam, M.; Kaushik, N. K.; Chauhan, V. S.; Verma., A. K. ACS Comb. Sci. 2011, 13, 530–536. (g) Katritzky, A. R.; Verma, A. K.; He, H.; Chandra, R. J. Org. Chem. 2003, 68, 4938–4940. (h) Tiwari, R. K.; Singh, D; Singh, J.; Yadav, V.; Phatak, A. K.; Dabur, R.; Chhillar, A.; Singh, R.; Sharma, G. L.; Chandra, R.; Verma, A. K. Bioorg. Med. Chem. Lett. 2006, 413– 416. (i) Tiwari, R. K.; Singh, D; Singh; Chhillar, A.; Chandra, R.; Verma, A. K. Eur. J. Med. Chem. 2006, 41, 40–49. (j) Tiwari, R. K.; Singh, J.; Singh, D.; Verma, A. K.; Chandra, R. Tetrahedron 2005, 61, 9513–9518. Org. Lett., Vol. 14, No. 4, 2012

This study supports and confirms the previously proposed mechanism via hydroamination followed by oxidative addition (route 2).

Scheme 1. Possible Pathways for the Tandem Synthesis of Indolo[2,1-a]isoquinolines via Intermediate R

Our initial studies focused on the use of benzotriazole (L1) as ligand for the N-arylation of heterocycles.10c Thus, reaction of 3-methylindole 1a and ((4-bromophenyl)ethynyl)trimethylsilane 2a using 2.0 equiv of KþOtBu, 10 mol % of CuI, and 20 mol % of L1 at 120 °C for 1 h was examined (Table 1, entry 1). Under basic reaction conditions, hydrolysis of the trimethylsilyl group occurred, and a mixture of E- and Z-addition products 4a was obtained in 72% yield in 80:20 stereoisomeric ratios along with 5% homocoupling product of alkyne (Table 1, entry 1). Interestingly, the reaction did not show the formation of any N-arylated product 5a. Increase in the reaction time from 1 to 5 h provided the thermodynamically stable transisomer in 95:5 ratios in 68% yield (Table 1, entry 2). Screening of other bases in the presence of metal and catalyst did not show any formation of aminated products and only mixtures of hydroaminated products were obtained (Table 1, entries 36). Weak bases like K2CO3 and Cs2CO3 provided the Z- as the major stereoisomer (Table 1, entries 3 and 4), and strong bases K3PO4 and KOH yielded the addition product with E- as the major isomer (Table 1, entries 5 and 6). In the absence of copper and L1, KOH yielded the Z-isomer in 89% yield in 30:70 stereoisomeric ratio (Table 1, entry 7). The reaction also proceeded well in the catalytic amount of the base with the formation of Z- isomer as a major product within 2025 min (Table 1, entry 8). With the recent report on the transition-metal free N-arylation of heterocycles using KOH and DMSO by Cano et al.12 and iron-catalyzed amidation of alkynyl bromides by Yao et al.,13 when a similar catalytic system was used, only hydroaminated product 4a was obtained in 82 and 55% yields, respectively (Table 1, entries 9 and 10). (12) Cano, R.; Ramon, D. J.; Yus., M. J. Org. Chem. 2011, 76, 654– 660. (13) Yao, B.; Liang, Z.; Niu, T.; Zhang, Y. J. Org. Chem. 2009, 74, 4630–4633. 1107

Table 1. Optimization of the Reaction Conditionsa

Table 2. Hydroamination of Alkynyl Bromidesa

yield (%)b entry 1 2c 3 4 5 6 7 8d 9e 10 11 12 13 14 15 16 17f 18f, g

base þ

t

K O Bu KþOtBu K2CO3 Cs2CO3 K3PO4 KOH KOH KOH KOH K2CO3 K2CO3 KþOtBu Cs2CO3 Cs2CO3 Cs2CO3 NaþOtBu K3PO4 K3PO4

catalyst

ligand

4 (E:Z)

CuI CuI CuI CuI CuI CuI    FeCl3.H2O CuI CuI Pd(OAc)2 Pd(OAc)2 Pd2(dba)3 Pd2(dba)3 CuI CuI

BtH BtH BtH BtH BtH BtH    DMEDA L-proline BtCH2OH dppf Xantphos (()-BINAP (()-BINAP BtH BtH

72 (80:20) 68 (95:05) 60 (30:70) 52 (40:60) 70 (80:20) 80 (60:40) 89 (30:70) 85 (05:95) 82 (90:10) 55 (60:40) 45 (70:30) 70 (80:20) 65 (75:25) 56 (80:20) 62 (70:30) 58 (90:10) 52 (90:10)

5/6

10 92

a Reactions were carried out using 1a (2.0 equiv), 2 (1.0 equiv), catalyst (10 mol %), ligand (20 mol %),and base (2.0 equiv) in DMSO (1.5 mL) at 120 °C for 1 h. b Isolated yield of mixture of E/Z isomers. c Time (5 h). d Base (0.2 equiv) and time (2025 min). e Time (72 h) and base (2.5 equiv). f 3a (1.0 equiv), time (24 h). g Without 2a.

Other well established copper- and palladium-catalyzed systems reported in the literature for the arylation of heterocyclic amines14,15 were also tried, but all of them provided the stereoisomeric mixture of hydroaminated products 4a along with 510% of homocoupling product (Table 1, entries 1116). Further, addition of 4-iodoanisole (3a) to the reaction of 1a and 2a in the presence of K3PO4 and BtH provided the products 4 in 52% yield along with 6a in 10%

Scheme 2. Selective Hydroamination

(14) For recent reviews, see: (a) Kunz, K.; Scholz, U.; Ganzer, D. Synlett. 2003, 2428–2439. (b) Beletskaya, I. P.; Cheprakov, A. V. Chem. Rev. 2004, 248, 2337–2364. (c) Antilla, J. C.; Klapars, A.; Buchwald, S. L. J. Am. Chem. Soc. 2002, 124, 11684–11688. (15) (a) Harris, M. C.; Geis, O.; Buchwald, S. L. J. Org. Chem. 1999, 64, 6019–6022. (b) Surry, D. S.; Buchwald, S. L. Chem. Sci. 2011, 2, 27–50. (c) Maiti, D.; Fors, B. P.; Henderson, J. L.; Nakamura, Y.; Buchwald, S. L. Chem. Sci. 2011, 2, 57–68. (d) Magano, J.; Dunetz, J. R. Chem. Rev. 2011, 111, 2177–2250. 1108

a Reactions were carried out using 1a (2.0 equiv) and 2 (1.0 equiv) in DMSO (1.5 mL) at 120 °C for 2030 min. b Isolated yield. c CuI (10 mol %), BtCH2OH (20 mol %), and KOH (2.0 equiv). d KOH = 0.2 equiv. e Time = 1012 h.

Org. Lett., Vol. 14, No. 4, 2012

yield (Table 1, entry 17).10c However, in the absence of 2a only N-arylated product 6a was obtained in 92% yield (Table 1, entry 18). Further, when reaction of aniline 7 was done with 2a, in the presence of 1a using CuI, KþOtBu, and BtH, interestingly, no hydroamination product of aniline 8 was observed and only 4a was isolated (Scheme 2). This observation suggested that hydroamination of heterocyclic aromatic amines is preferred over aryl amines. To check the scope and limitations of the reaction, further various N-heterocycles 1ag were examined with different bromo-substituted alkynes 2ae under arylation (Table 2, entries 13) and hydroamination conditions (Table 2, entries 411). It was observed that the presence of an electron-donating group at the third position of the indole ring in 1a enhances the conversion of kinetically stable cis- to trans-isomer, and the reaction was completed within 1015 min and afforded the hydroaminated product 4a in 75% yield in 89:11 stereoisomeric ratios (Table 2, entry 1). Electron-deficient heterocycle imidazole 1b provided the addition product 4b in 58% yield with the Z-isomer as the major product (Table 2, entry 2). It was interesting to see that electron-rich pyrrole 1c when reacted with ((2- bromophenyl)ethynyl)trimethylsilane 2b under the catalytic conditions provided the mixture of E:Z addition products instead of the expected pyrrolo[2,1-a]isoquinoline (Table 2, entry 3). The stereochemistry and isomeric ratio of these products were confirmed and calculated by NMR spectroscopy. Reaction of electronrich and electron-deficient N-heterocycles 1ag with ortho-, meta-, and para-substituted bromoarylalkynes using 20 mol % of KOH at 120 °C afforded the corresponding hydroaminated products 4dj stereoselectively in 62 90% yields, respectively, within 1520 min (Table 2, entries 410). Reaction with longer times (1012 h) using a catalytic amount of KOH afforded the E-isomer in 82% yield (Table 2, entry 11). Internal alkyne 1-bromo-4-(p-tolylethynyl)benzene 2d also provided the mixture of hydroaminated products in 63% yield (Table 2, entry 12). o-Bromoarylalkyne 2e afforded the cyclized product 12-methyl-6-p-tolylindolo[2,1-a]isoquinoline (16) Crystallographic data have been deposited at the Cambridge Crystallographic data Centre as a CIF deposit with file number 855111. Copies of these data can be obtained free of charge on application to CCDC, email [email protected]. The CIF is also included in the Supporting Information.

Org. Lett., Vol. 14, No. 4, 2012

4m in 68% yield (Table 2, entry 13). Further, the X-ray crystallographic data of 4i also confirmed the stereochemistry and selective formation of hydroaminated product (Figure 1).16

Figure 1. X-ray crystallographic ORTEP drawings of compound 4i drawn at the 50% probability level.

In summary, for the first time, a reaction of various N-heterocycles and halo-substituted arylalkynes was performed, and it was observed that hydroamination is preferred over amination of aryl halide. The results of the present study, preferential addition of N-heterocycles onto halo-substituted arylalkynes suggests that the mechanism of the copper-catalyzed tandem synthesis of indolo- and pyrrolo[2,1-a]isoquinolines proceeds via generation of intermediate Q through hydroamination followed by oxidative addition to the key intermediate R and not vice versa (Scheme 2, route 2). Further theoretical investigations in this area are currently underway and will be reported in due course. Acknowledgment. We gratefully acknowledge the Council of Scientific and Industrial Research [01(2466)/11/ EMR-II] for financial support and USIC for providing instrumentation facilties. We thank Sushil Kumar, University of Delhi, for his kind help in solving X-ray crystallographic data. M.J. thanks UGC for a fellowship. Supporting Information Available. Detailed experimental procedures and copies of HRMS, 1H NMR, and 13C NMR spectra for all new compounds. CIF for compound 4i. This material is available free of charge via the Internet at http://pubs.acs.org. The authors declare no competing financial interest.

1109