Regioselective Synthesis of Carbonyl-Containing Alkyl Chlorides via

Feb 3, 2016 - A novel and regioselective approach to carbonyl-containing alkyl chlorides via silver-catalyzed ring-opening chlorination of cycloalkano...
0 downloads 16 Views 490KB Size
Letter pubs.acs.org/OrgLett

Regioselective Synthesis of Carbonyl-Containing Alkyl Chlorides via Silver-Catalyzed Ring-Opening Chlorination of Cycloalkanols Feng-Qing Huang, Jian Xie, Jian-Guo Sun, Yue-Wei Wang, Xin Dong, Lian-Wen Qi,* and Bo Zhang* State Key Laboratory of Natural Medicines, China Pharmaceutical University, 24 Tongjia Xiang, Nanjing 210009, China S Supporting Information *

ABSTRACT: A novel and regioselective approach to carbonyl-containing alkyl chlorides via silver-catalyzed ring-opening chlorination of cycloalkanols is reported. Concurrent C(sp3)−C(sp3) bond cleavage and C(sp3)−Cl bond formation efficiently occur with good yields under mild conditions, and the chlorinated products are readily transformed into other useful synthetic intermediates and drugs. The reaction features complete regioselectivity, high efficiency, and excellent practicality. powerful tools for the regioselective synthesis of β- and γfunctionalized ketones.14 Encouraged by these successful examples, we became interested in constructing carbonylcontaining alkyl chlorides from cycloalkanols via the ringopening cross-coupling strategy.15 It is important to note that carbonyl-containing alkyl chlorides frequently serve as key synthetic intermediates for the synthesis of bioactive molecules.16 Herein, we describe a novel, silver-catalyzed direct chlorination of cycloalkanols via C(sp3)−C(sp3) bond cleavage producing carbonyl-containing alkyl chlorides. The reaction proceeds efficiently with complete regioselectivity. A variety of valuable β-, γ-, δ-, ε-, and ζ-chlorinated ketones were readily prepared in moderate to excellent yields under mild conditions. As the Cl source, we used commercially available and stable tert-butyl hypochlorite (tBuOCl), and initial studies were conducted on readily prepared cyclobutanol 1a. We first screened various Ag salts as catalysts in DCM at room temperature for 12 h under a nitrogen atmosphere. Unfortunately, the targeted product 2a was not formed in the presence of AgF, AgSCN, AgNO3, AgBF4, or AgOTf (Table 1, entry 1). Because ligands play a key role in various transitionmetal-catalyzed reactions, we next screened a range of ligands L1−L5 in the presence of AgOTf as a catalyst (Table 1, entries 2−6). The yield of 2a was significantly improved to 82% by employing 1,10-phenanthroline L1 as a ligand. Encouraged by this result, we further optimized the reaction conditions. A series of Ag salts, such as AgF, AgSCN, AgNO3, and AgBF4, were tested under the same conditions, affording 2a in 49−75% yields (Table 1, entries 7−10). These results indicate that AgOTf performed better. In addition, the reaction did not work well in the presence of Fe and Cu salts as catalysts (Table 1, entries 11 and 12). Alternative Cl reagents, such as TsCl, NaCl, nBu4NCl, and NCS, did not provide the desired product 2a (Table 1, entries 13−16). Solvent effects were investigated, and we found that CH3CN is the best solvent for the trans-

A

lkyl chlorides are a highly important and valuable class of compounds, which have gained considerable attention from the synthetic community because of their wide application as versatile building blocks and synthetic intermediates in natural product and drug synthesis.1 It is estimated that more than 70% of all pharmaceutical products possess chlorine or are manufactured using chlorine. In addition, numerous natural products contain chlorine and many of them show excellent bioactivity such as antibiotic or cytotoxic activity.2 In light of the importance of this class of compound, there is continuing interest in the development of synthetic methods for C(sp3)− Cl bond construction. In general, the alkyl chlorides are prepared from their corresponding alcohols,3 carboxylic acids,4 and diazo compounds.5 However, these precursors are not sometimes easy to obtain. Other alternative and complementary approaches to alkyl chlorides rely on chlorination of olefins6 or alkynes.7 From the point of view of atom and step economy, the direct chlorination of inert chemical bonds such as C(sp3)−H bonds and C(sp3)−C(sp3) bonds is the most straightforward and attractive approach for C(sp3)−Cl bond formation because of their abundance in organic compounds. Although direct chlorination of unreactive alkanes can generate alkyl chlorides, this route usually suffers from some obvious limitations including poor regioselectivity and harsh reaction conditions.8 In recent years, palladium-catalyzed directed C(sp3)−H activation methods for the preparation of alkyl chlorides have emerged as an efficient strategy for the regioselective construction of a C(sp3)−Cl bond.9 However, the C(sp3)−Cl bond formation is limited to benzylic C−H bonds of 8-methyl quinoline,9a 1°-C(sp3)−H bonds of N-methoxy amide,9b 2-tertbutylpyridine,9c and S-methyl-S-2-pyridyl-sulfoximine.9d Therefore, the development of novel and efficient methods for the regioselective construction of a C(sp3)−Cl bond remains fascinating and challenging at the same time. Cycloalkanols are important and versatile compounds, which have found widespread applications in organic synthesis.10,11 Recently, transition-metal-catalyzed12 and radical-mediated13 ring-opening cross-coupling of cycloalkanols have emerged as © XXXX American Chemical Society

Received: December 24, 2015

A

DOI: 10.1021/acs.orglett.5b03649 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters Table 1. Optimization of Reaction Conditionsa

Scheme 1. Various γ-Chlorinated Ketones Prepareda,b

entry

catalyst

ligand

Cl source

solvent

yieldb (%)

1c 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20d 21e 22e,f 23

AgX AgOTf AgOTf AgOTf AgOTf AgOTf AgF AgSCN AgNO3 AgBF4 Fe(OTf)2 2[CuOTf]·C6H6 AgOTf AgOTf AgOTf AgOTf AgOTf AgOTf AgOTf AgOTf AgOTf AgOTf none

none L1 L2 L3 L4 L5 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1

tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl TsCl NaCl nBu4NCl NCS tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl tBuOCl

DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM DCM CH3CN THF DCE CH3CN CH3CN CH3CN CH3CN

0 82 72 trace trace trace 61 49 65 75 trace trace 0 0 0 0 88 0 74 72 90 39 trace

a

Reaction conditions: 1a (0.3 mmol), AgOTf (10 mol %), L1 (20 mol %), and tBuOCl (0.6 mmol) in CH3CN (2.0 mL) at room temperature under N2 for 6 h. bIsolated yields. c1.66 g of 2a prepared.

practicality of the method, we ran a preparative scale reaction with 1a to produce 2a in 91% yield (1.66 g). We next investigated the reaction of cyclopropanols with tBuOCl. Various β-chlorinated ketones could be readily prepared by using the ring-opening strategy (Scheme 2a). Scheme 2. Various β-, δ-, ε-, and ζ-Chlorinated Ketones Prepared

a Reaction conditions: 1a (0.3 mmol), catalyst (10 mol %), ligand (20 mol %), and tBuOCl (0.6 mmol) in solvent (2.0 mL) at room temperature under N2 for 12 h. bIsolated yields. cUsing AgF, AgSCN, AgNO3, AgBF4, or AgOTf as a catalyst. dUsing 5 mol % of AgOTf and 10 mol % of L1. eThe reaction was conducted for 6 h. fThe reaction was conducted under air.

formation (Table 1, entries 16−18). Lowering the catalyst and ligand loading decreased the yield to 72% (Table 1, entry 20). When the reaction was performed for 6 h, the yield was not affected (Table 1, entry 21). When the reaction was carried out under air, 2a was obtained in 39% yield (Table 1, entry 22). The reaction did not proceed well in the absence of a silver catalyst, which confirmed the catalytic effect of silver salt (Table 1, entry 23). With optimized reaction conditions in hand, the scope and limitations of this process were investigated. A variety of cyclobutanols bearing different substituents were tested, and the results are listed in Scheme 1. All of the reactions achieved full conversion within 6 h at room temperature. Arylsubstituted cyclobutanols containing electron-withdrawing or -donating substituents at the para position of the benzene ring were good substrates to afford the desired products 2b−2i in good to excellent yields (73−92%). The substituent positions did not affect the efficiency of the reaction to a large extent (see 2j−2l). The naphthyl derivatives underwent the transformation smoothly to generate the corresponding products in moderate yields (see 2m and 2n). Notably, alkyl-substituted cyclobutanol 1o was found to be compatible under optimized conditions, leading to the desired product 2o in 50% yield. To show the

a

Reaction conditions: 1a (0.3 mmol), AgOTf (10 mol %), L1 (20 mol %), and tBuOCl (0.6 mmol) in solvent (2.0 mL) at room temperature under N2 for 6 h. bReaction conditions: 1a (0.3 mmol), AgOTf (10 mol %), L1 (20 mol %), and tBuOCl (0.9 mmol) in solvent (2.0 mL) at room temperature under N2 for 48 h. cIsolated yields.

Compared to cyclobutanols, cyclopropanols provided lower yields due to some side reactions. When 1-aryl-substituted cyclopropanol 3a was used as the substrate, the targeted product 4a was obtained in 53% yield. Moreover, alkylsubstituted cyclopropanols were successfully converted to the corresponding products in good yields (see 4b and 4c). We also successfully tested a disubstituted cyclopropanol 3d and B

DOI: 10.1021/acs.orglett.5b03649 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters isolated β-chlorinated ketone 4d in 46% yield with complete regiocontrol. To explore the scope of the reaction further, we turned our attention to the ring-opening chlorination of less strained cyclopentanols. The δ-chlorinated ketone 4e could be obtained in 80% yield with full conversion by using 3.0 equiv of tBuOCl in CH3CN at room temperature for 48 h (Scheme 2b). Under these conditions, various aryl-substituted cyclopentanols containing different groups proceeded efficiently and afforded the corresponding products 4f−4j in good to excellent yields with complete conversion. Finally, we showed that the ringopening chlorination reaction could also be applied to the synthesis of ε-chlorinated ketones. For instance, ε-chlorinated ketone 4k was prepared in 82% yield with 100% conversion from cyclohexanol 3k (Scheme 2c). However, the reaction conducted on cycloheptanol 4l provided a low yield due to the formation of some byproducts (Scheme 2d). Chlorine-substituted ketones are useful precursors for further functionalization and readily provide other valuable synthetic intermediates e.g., via halogen-exchange reaction, nucleophilic substitution, or carbonyl reduction. As a representative, a variety of transformations are displayed by using γ-chlorinated ketones as starting materials (Scheme 3). Alkyl iodide 5 was

standard conditions in the presence of 2,6-di-tert-butyl-4methylphenol (BHT) or 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as the radical scavenger. As expected, addition of BHT or TEMPO completely suppressed formation of 2a. On the basis of these experiments and previous reports,13 a plausible reaction mechanism is proposed in Scheme 4. First, Scheme 4. Proposed Reaction Mechanism

Scheme 3. Transformations of γ-Chlorinated Ketones AgOTf is oxidized by tBuOCl to generate the Ag(III) species I,25 which undergoes ligand exchange and coordinates with cycloalkanols to afford the intermediate II. Subsequently, homolysis of intermediate II provides the Ag(II) species III and oxygen-centered radical IV, which undergoes rearrangement to give the alkyl radical V. Finally, V reacts with the Ag(II) species III to form the products.4d This process allows the regeneration of the Ag catalyst. In summary, we have presented a novel and efficient approach for the preparation of carbonyl-containing alkyl chlorides via silver-catalyzed ring-opening chlorination of cycloalkanols. The transformation uses commercially available and stable tBuOCl as the Cl source. Reactions are very easy to conduct, and a wide range of β-, γ-, δ-, ε-, and even ζchlorinated ketones are obtained in moderate to excellent yields. The synthetic value of chlorinated products has been documented by a series of chemical transformations.



readily prepared in 81% yield from 2a via halogen-exchange reaction.17 Carbonyl reduction in 2a with NaBH4 in MeOH provided alcohol 6 in 96% yield, which could be transformed into valuable 2-phenyltetrahydrofuran 7.18 Moreover, chiral tetrahydrothiophene 8 could be obtained in three steps from 2a according to the literature.19 2a was easily converted to alkyl azide 9 in 94% yield by using NaN3/DMF at 70 °C.20 2-Phenyl1-pyrroline 10 could be synthesized by the reaction of 9 with PPh3/Et2O via iminophosphorane as the intermediate.21 As expected, 9 was a suitable substrate for a click reaction, providing triazole 11 in 91% yield.22 Notably, the current approach provides many opportunities for application to drug and bioactive molecule synthesis. For example, spiperidol 12 (dopamine receptor antagonist) and haloperidol 13 (antipsychotics) could be readily prepared in one step from 2b and corresponding amines according to the reported procedure.23,24 Preliminary mechanistic studies revealed that the ringopening chlorination of cycloalkanols seems to proceed through a radical process. To obtain additional support for this mechanism, the reaction of 1a was conducted under the

ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.orglett.5b03649. Experimental details and characterization data for the products (PDF)



AUTHOR INFORMATION

Corresponding Authors

*E-mail: [email protected]. *E-mail: [email protected]. Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS We are grateful to a Start-up Grant from China Pharmaceutical University for financial support of this work. C

DOI: 10.1021/acs.orglett.5b03649 Org. Lett. XXXX, XXX, XXX−XXX

Letter

Organic Letters



(12) For selected examples, see: (a) Nishimura, T.; Uemura, S. J. Am. Chem. Soc. 1999, 121, 11010. (b) Park, S.-B.; Cha, J. K. Org. Lett. 2000, 2, 147. (c) Matsumura, S.; Maeda, Y.; Nishimura, T.; Uemura, S. J. Am. Chem. Soc. 2003, 125, 8862. (d) Ethirajan, M.; Oh, H.-S.; Cha, J. K. Org. Lett. 2007, 9, 2693. (e) Ziadi, A.; Martin, R. Org. Lett. 2012, 14, 1266. (f) Parida, B. B.; Das, P. P.; Niocel, M.; Cha, J. K. Org. Lett. 2013, 15, 1780. (g) Ziadi, A.; Correa, A.; Martin, R. Chem. Commun. 2013, 49, 4286. (h) Rosa, D.; Orellana, A. Chem. Commun. 2013, 49, 5420. (i) Nithiy, N.; Orellana, A. Org. Lett. 2014, 16, 5854. (j) Li, Y.; Ye, Z.; Bellman, T. M.; Chi, T.; Dai, M. Org. Lett. 2015, 17, 2186. (k) Ye, Z.; Dai, M. Org. Lett. 2015, 17, 2190. (13) For recent examples, see: (a) Jiao, J.; Nguyen, L. X.; Patterson, D. R.; Flowers, R. A., II Org. Lett. 2007, 9, 1323. (b) Wang, Y.-F.; Chiba, S. J. Am. Chem. Soc. 2009, 131, 12570. (c) Wang, Y.-F.; Toh, K. K.; Ng, E. P. J.; Chiba, S. J. Am. Chem. Soc. 2011, 133, 6411. (d) Ilangovan, A.; Saravanakumar, S.; Malayappasamy, S. Org. Lett. 2013, 15, 4968. (e) Zhao, H.; Fan, X.; Yu, J.; Zhu, C. J. Am. Chem. Soc. 2015, 137, 3490. (f) Ren, R.; Zhao, H.; Huan, L.; Zhu, C. Angew. Chem., Int. Ed. 2015, 54, 12692. (g) Wang, S.; Guo, L.-N.; Wang, H.; Duan, X.-H. Org. Lett. 2015, 17, 4798. (h) Bloom, S.; Bume, D. D.; Pitts, C. R.; Lectka, T. Chem. - Eur. J. 2015, 21, 8060. (i) Ren, S.; Feng, C.; Loh, T.-P. Org. Biomol. Chem. 2015, 13, 5105. (j) Kananovich, D. G.; Konik, Y. A.; Zubrytski, D. M.; Järving, I.; Lopp, M. Chem. Commun. 2015, 51, 8349. (14) For some reviews on C−C bond cleavage, see: (a) Crabtree, R. H. Chem. Rev. 1985, 85, 245. (b) Jun, C.-H. Chem. Soc. Rev. 2004, 33, 610. (c) Chen, F.; Wang, T.; Jiao, N. Chem. Rev. 2014, 114, 8613. (d) Dermenci, A.; Coe, J. W.; Dong, G. Org. Chem. Front. 2014, 1, 567. (e) Souillart, L.; Cramer, N. Chem. Rev. 2015, 115, 9410. (15) During our preparation of this manuscript, a work on the synthesis of alkyl chlorides from cycloalkanols by using the AgNO3/ K2S2O8/NCS system has been reported; see: Fan, X.; Zhao, H.; Yu, J.; Bao, X.; Zhu, C. Org. Chem. Front. 2016, 3, 227. (16) For selected examples, see: (a) Jin, C.; Mayer, L. D.; Lewin, A. H.; Rehder, K. S.; Brine, G. A. Synth. Commun. 2008, 38, 816. (b) Leyva-Pérez, A.; Cabrero-Antonino, J. R.; Rubio-Marqués; AlResayes, S. I.; Corma, A. ACS Catal. 2014, 4, 722. (17) Li, W.; Tan, F.; Hao, X.; Wang, G.; Tang, Y.; Liu, X.; Lin, L.; Feng, X. Angew. Chem., Int. Ed. 2015, 54, 1608. (18) Mansueto, R.; Mallardo, V.; Perna, F. M.; Salomone, A.; Capriati, V. Chem. Commun. 2013, 49, 10160. (19) Robertson, F. J.; Wu, J. J. Am. Chem. Soc. 2012, 134, 2775. (20) Ngu, K.; Weinstein, D. S.; Liu, W.; Langevine, C.; Combs, D. W.; Zhuang, S.; Chen, X.; Madsen, C. S.; Harper, T. W.; Ahmad, S.; Robl, J. A. Bioorg. Med. Chem. Lett. 2011, 21, 4141. (21) Karoui, H.; Nsanzumuhire, C.; Le Moigne, F. L.; Tordo, P. J. Org. Chem. 1999, 64, 1471. (22) Zhang, B.; Studer, A. Org. Lett. 2013, 15, 4548. (23) Zigelboim, I.; Weissberg, A.; Cohen, Y. J. Org. Chem. 2013, 78, 7001. (24) Iorio, M. A.; Reymer, T. P.; Frigeni, V. J. Med. Chem. 1987, 30, 1906. (25) (a) Lash, T. D.; Rasmussen, J. M.; Bergman, K. M.; Colby, D. A. Org. Lett. 2004, 6, 549. (b) Font, M.; Acuña-Parés, F.; Parella, T.; Serra, J.; Luis, J. M.; Lloret-Fillol, J.; Costas, M.; Ribas, X. Nat. Commun. 2014, 5, 4373.

REFERENCES

(1) (a) Gribble, G. W. Acc. Chem. Res. 1998, 31, 141. (b) Vaillancourt, F. H.; Yeh, E.; Vosburg, D. A.; Tsodikova, S. G.; Walsh, C. T. Chem. Rev. 2006, 106, 3364. (c) Liu, W.; Groves, J. T. Acc. Chem. Res. 2015, 48, 1727. (2) (a) Naturally-Produced Organohalogens; Grimvall, A., de Leer, E. W. B., Eds.; Springer: Netherlands, 1995. (b) Gribble, G. W. Am. Sci. 2004, 92, 342. (c) Gribble, G. W. J. Chem. Educ. 2004, 81, 1441. (d) Gribble, G. W. Naturally Occurring Organohalogen Compounds−A Comprehensive Update; Springer: Wien, 2010. (e) Gribble, G. W. Heterocycles 2012, 84, 157. (3) For selected examples, see: (a) Vanos, C. M.; Lambert, T. H. Angew. Chem., Int. Ed. 2011, 50, 12222. (b) Pouliot, M.-F.; Mahé, O.; Hamel, J.-D.; Desroches, J.; Paquin, J.-F. Org. Lett. 2012, 14, 5428. (c) Villalpando, A.; Ayala, C. E.; Watson, C. B.; Kartika, R. J. Org. Chem. 2013, 78, 3989. (d) Moerdyk, J. P.; Bielawski, C. W. Chem. Eur. J. 2014, 20, 13487. (e) Nguyen, T. V.; Bekensir, A. Org. Lett. 2014, 16, 1720. (4) (a) Johnson, R. G.; Ingham, R. K. Chem. Rev. 1956, 56, 219. For selected examples, see: (b) Kochi, J. K. J. Am. Chem. Soc. 1965, 87, 2500. (c) Crich, D. Comp. Org. Synth. 1991, 7, 717. (d) Wang, Z.; Zhu, L.; Yin, F.; Su, Z.; Li, Z.; Li, C. J. Am. Chem. Soc. 2012, 134, 4258. (e) Sakai, N.; Nakajima, T.; Yoneda, S.; Konakahara, T.; Ogiwara, Y. J. Org. Chem. 2014, 79, 10619. (5) For selected examples, see: (a) Tao, J.; Tran, R.; Murphy, G. K. J. Am. Chem. Soc. 2013, 135, 16312. (b) Magar, K. B. S.; Lee, Y. R. Adv. Synth. Catal. 2014, 356, 3422. (c) Murphy, G. K.; Abbas, F. Z.; Poulton, A. V. Adv. Synth. Catal. 2014, 356, 2919. (d) Coffey, K. E.; Moreira, R.; Abbas, F. Z.; Murphy, G. K. Org. Biomol. Chem. 2015, 13, 682. (6) For selected recent examples, see: (a) Gaspar, B.; Carreira, E. M. Angew. Chem., Int. Ed. 2008, 47, 5758. (b) Nicolaou, K. C.; Simmons, N. L.; Ying, Y.; Heretsch, P. M.; Chen, J. S. J. Am. Chem. Soc. 2011, 133, 8134. (c) Tay, D. W.; Tsoi, I. T.; Er, J. C.; Leung, G. Y. C.; Yeung, Y.-Y. Org. Lett. 2013, 15, 1310. (d) Liu, L.; Zhang-Negrerie, D.; Du, Y.; Zhao, K. Org. Lett. 2014, 16, 436. (e) Du, W.; Tian, L.; Lai, J.; Huo, X.; Xie, X.; She, X.; Tang, S. Org. Lett. 2014, 16, 2470. (f) Soltanzadeh, B.; Jaganathan, A.; Staples, R. J.; Borhan, B. Angew. Chem., Int. Ed. 2015, 54, 9517. (g) Cresswell, A. J.; Eey, S. T.-C.; Denmark, S. E. Nat. Chem. 2015, 7, 146. (7) D’Oyley, J. M.; Aliev, A. E.; Sheppard, T. D. Angew. Chem., Int. Ed. 2014, 53, 10747. (8) (a) Kharasch, M. S.; Brown, H. C. J. Am. Chem. Soc. 1939, 61, 2142. (b) Kharasch, M. S.; Berkman, M. G. J. Org. Chem. 1941, 6, 810. (c) Huyser, E. S.; Giddings, B. J. Org. Chem. 1962, 27, 3391. (d) Deno, N. C.; Gladfelter, E. J.; Pohl, D. G. J. Org. Chem. 1979, 44, 3728. (e) Hill, C. L.; Smegal, J. A.; Henly, T. J. J. Org. Chem. 1983, 48, 3277. (f) Liu, W.; Groves, J. T. J. Am. Chem. Soc. 2010, 132, 12847. (g) He, Y.; Goldsmith, C. R. Synlett 2010, 2010, 1377. (9) (a) Kalyani, D.; Dick, A. R.; Anani, Q. W.; Sanford, M. S. Tetrahedron 2006, 62, 11483. (b) Wasa, M.; Yu, J.-Q. J. Am. Chem. Soc. 2008, 130, 14058. (c) Stowers, K. J.; Kubota, A.; Sanford, M. S. Chem. Sci. 2012, 3, 3192. (d) Rit, R. K.; Yadav, M. R.; Ghosh, K.; Shankar, M.; Sahoo, A. K. Org. Lett. 2014, 16, 5258. (10) For reviews, see: (a) Kulinkovich, O. G. Chem. Rev. 2003, 103, 2597. (b) Leemans, E.; D’hooghe, M.; De Kimpe, N. Chem. Rev. 2011, 111, 3268. (c) Marek, I.; Masarwa, A.; Delaye, P.-O.; Leibeling, M. Angew. Chem., Int. Ed. 2015, 54, 414. (11) For selected examples, see: (a) Nishimura, T.; Ohe, K.; Uemura, S. J. Am. Chem. Soc. 1999, 121, 2645. (b) Youn, J.-H.; Lee, J.; Cha, J. K. Org. Lett. 2001, 3, 2935. (c) Seiser, T.; Cramer, N. Angew. Chem., Int. Ed. 2008, 47, 9294. (d) Seiser, T.; Roth, O. A.; Cramer, N. Angew. Chem., Int. Ed. 2009, 48, 6320. (e) Waibel, M.; Cramer, N. Angew. Chem., Int. Ed. 2010, 49, 4455. (f) Seiser, T.; Cramer, N. J. Am. Chem. Soc. 2010, 132, 5340. (g) Schweinitz, A.; Chtchemelinine, A.; Orellana, A. Org. Lett. 2011, 13, 232. (h) Souillart, L.; Cramer, N. Chem. Sci. 2014, 5, 837. (i) Murali, R. V. N. S.; Rao, N. N.; Cha, J. K. Org. Lett. 2015, 17, 3854. D

DOI: 10.1021/acs.orglett.5b03649 Org. Lett. XXXX, XXX, XXX−XXX