Reversal Phenomenon of Reaction Velocity in a Mixed Reaction

Reversal Phenomenon of Reaction Velocity in a Mixed Reaction System: Silylations between Simple Alcohols and r- or β-Hydroxyketones Using Anilinosilanes and Catalytic TBAF Agent

SCHEME 1. Reversal Phenomenon of Reaction Velocities between Independent and Mixed Reaction Systems

Akira Iida, Chihiro Hashimoto, Tomonori Misaki, Yukiteru Katsumoto, Yukihiro Ozaki,* and Yoo Tanabe* Department of Chemistry, School of Science and Technology, Kwansei Gakuin UniVersity, 2-1 Gakuen, Sanda, Hyogo 669-1337, Japan

[email protected] ReceiVed January 14, 2007 its substrate specificity between simple alcohols and R- or β-hydroxyketones (Scheme 1). The order of silylation-velocity between the independent system and the mixed system was distinctively reversed [νA > νB ≈ νB(mix) > νA(mix)]. Initial examination was guided by the silylation of linalool (2) and valeroin (3) using TMS-A (1a) and cat TBAF. As shown in Figure 1, for an independent reaction, linalool (2) was trimethylsilylated to give TMS ether 2′ in 100% conversion yield within 1 min (b), whereas the conversion of valeroin (3) to TMS ether 3′ required 60 min for completion despite being a more reactive

We encountered a unique phenomenon of reaction velocity reversal during the silylation between mixed simple alcohols (A; AOH) and R- or β-hydroxyketones (B; BOH). The present reaction system using anilinosilanes 1a [PhNH(TMS)] (TMS-A) and 1b [PhNH(TES)] (TES-A) with the catalytic TBAF (0.02 equiv) reagent showed that the order of silylation-velocity between the independent system and the mixed system was distinctively reversed [νA > νB ≈ νB(mix) > νA(mix)]. A total of seven examples indicate its high generality: AOH ) linalool, 3-octanol; BOH ) valeroin, benzoin, 5-hydroxy-4-methyl-3-undecanone. Time-dependent IR spectroscopy analysis rationally supported this speculation. It is the usual behavior of chemical reactions that when an equimolar mixture of comparable substrates A and B (assuming that A is more reactive than B) is subjected to a particular chemical reaction A is preferentially transformed more rapidly than B. On the basis of this assumption, competitive experiments are frequently performed to compare the reactivity of A and B. In our studies of practical silylations and a desilylation,1 we encountered a unique phenomenon of reaction velocity reversal during the silylation between mixed simple alcohols (A; AOH) and R- or β-hydroxyketones (B; BOH). Silazanes and catalytic TBAF (tetrabutylammonium fluoride) are efficient silylation agents.1a,2,3 Extensive screening of silazanes reveals that anilinosilanes 1 [abbreviated TMS-A (1a) or TES-A (1b)] are powerful reagents for sterically crowded alcohols.2e A striking aspect of 1 and cat TBAF reagent lies in * To whom correspondence should be addressed. Telephone: (+81)-79565-8394. Fax: (+81)-795-65-8394. E-mail: [email protected].

(1) (a) Green, T. W.; Wuts, P. G. M. ProtectiVe Groups in Organic Synthesis, 4th ed.; John Wiley: New York, 2007; p 172. (b) Kocienski, P. Protecting Groups; Thieme: Stuttgart, 1994; p 28.

FIGURE 1. Reversal phenomenon of trimethylsilylation using 2 and 3/1a/catalytic TBAF.

secondary alcohol (O). The competitive reaction using equimolar mixtures of 2 and 3 under otherwise identical conditions, however, produced an entirely opposite result; 3 was trimethylsilyl(2) (a) Tanabe, Y.; Murakami, M.; Kitaichi, K.; Yoshida, Y. Tetrahedron Lett. 1994, 35, 8409. (b) Tanabe, Y.; Okumura, H.; Maeda, A.; Murakami, M. Tetrahedron Lett. 1994, 35, 8143. (c) Misaki, T.; Kurihara, M.; Tanabe, Y. Chem. Commun. 2001, 2478. (d) Tanabe, Y.; Misaki, T.; Kurihara, M.; Iida, A. Chem. Commun. 2002, 1628. (e) Iida, A.; Horii, A.; Misaki, T.; Tanabe, Y. Synthesis 2005, 2677. (f) Iida, A.; Okazaki, H.; Misaki, T.; Sunagawa, M.; Sasaki, A.; Tanabe, Y. J. Org. Chem. 2006, 71, 5380. (3) Johnson, D. A.; Taubner, L. M. Tetrahedron Lett. 1996, 37, 605. 10.1021/jo070081i CCC: $37.00 © 2007 American Chemical Society

4970

J. Org. Chem. 2007, 72, 4970-4973

Published on Web 05/31/2007

FIGURE 2. Reversal phenomenon of triethylsilylation using 2 and 3/1b/catalytic TBAF.

FIGURE 3. Reversal phenomenon of trimethylsilylation using 2 and

FIGURE 4. Reversal phenomenon of trimethylsilylation using 5 and 3/1a/catalytic TBAF.

4/1a/catalytic TBAF.

FIGURE 5. Reversal phenomenon of trimethylsilylation using 5 and

ated in 100% conversion yield during 60 min (4), with almost quantitative recovery of 2 (2). It is apparent that the order of velocity was reversed: νA > νB ≈ νB(mix) > νA(mix). Independent and mixed triethylsilylations of 2 and 3 using TES-A (1b) and cat TBAF also produced quite a similar reversal phenomenon (Figure 2). The present reversal phenomenon of trimethylsilylation was also observed in independent and mixed reactions between linalool 2 (as an AOH) and benzoin 4 (as a BOH) (Figure 3). The present phenomenon is general enough because four additional examples were performed (Figures 4-6, S8). Figure 4 depicts independent and mixed trimethylsilylations between 3-octanol 5 instead of linalool 2 and valeroin 3. Due to the higher reactivity of 5 than 2, 5 was slightly trimethylsilylated (25% yield) in a mixed system, but a significant reversal phenomenon was performed (3 was trimethylsilylated in 70%).

Similar result was obtained by the reaction between 5 and benzoin 4, as shown in Figure 5. Figure 6 shows a trimethylsilylation using 1a between 2 and βhydroxyketone (aldol) 6, which also served as a suitable substrate for the present reaction system. The reversal phenomenon using N-methyl-N-TMS-acetamide (7), a good silylation agent, was observed with TBAF catalyst1a,e (Figure S8 in Supporting Information). As shown in Scheme 2, a cross-over experiment eliminated one plausible explanation (i.e., that 2 is initially silylated to give 2′ and the TMS group in 2′ is then transferred to 3 during the course of the mixed reaction); there was no substantial TMS transfer (no reaction) when using equimolar mixtures of 2′ and 3 under identical conditions [in either the presence or absence of TMS-A (1a)].

4/1a/catalytic TBAF.

J. Org. Chem, Vol. 72, No. 13, 2007 4971

FIGURE 6. Reversal phenomenon of trimethylsilylation using 2 and 6/1a/catalytic TBAF.

SCHEME 2

SCHEME 3.

Proposed Mechanism

during the reaction.5 Figure 7a shows the spectra of 3 and 3′ without TBAF catalyst (no reaction). 1a was added to the mixture of 3 and TBAF (0.02 equiv) to generate TMS ether 3′ and aniline at 20-25 °C for 3 min. The temporal change of the spectra in the 1680-1750 cm-1 region is shown in Figure 7b. The CdO stretching band of 3 at 1713 cm-1 first shifted, then eventually the spectra became almost identical to that of 3′. Figure 7c shows the temporal change of the top peak position. The CdO stretching band at 1713 cm-1 (3) shifted toward a lower wavenumber by ca. 1 cm-1 just after the addition of 1a, then gradually shifted again to a higher wavenumber at 1715 cm-1 (3′) (O). In general, interaction of the XH (X ) O and N) group with the lone pairs of the CdO oxygen atom causes the lower wavenumber change of the stretching band.6,7 These wavenumber shifts of 3, therefore, strongly suggest a CdO‚‚‚HN interaction. Figure 7c affords additional information under two other conditions: (i) no wavenumber shift (2) was observed using 3 and 1a (no reaction); and (ii) a lower wavenumber band shift (×) was observed using 3, 1a, and TBAF with coexistence of linalool 2. These results indicate that the interaction between 3 and 1a holds over in the presence of 2 and supports the selective transformation of 3. The NH stretching band of 1a at 3383 cm-1 also shows a wavenumber shift ca. 4 cm-1 after the addition of 1a due to the interaction between the NH (1a) and CdO (3) group (Figure S9 in Supporting Information). These show a clear band shift toward lower wavenumbers of both the CdO and NH band. All of these time-dependent IR spectroscopy measurements reveal the existence of intermediate 10 in Scheme 3. The second derivatives of the spectra in Figures 7b and S9b are described in the Supporting Information. These show a clear band shift toward lower wavenumber of both the CdO and NH band. We disclosed a unique reversal phenomenon of reaction velocity in a mixed reaction system. There was a distinctive switching mode of reaction velocity between the independent system and the mixed system [νA > νB ≈ νB(mix) > νA(mix)] during the silylation of simple alcohols (A; AOH) and R- or β-hydroxyketones (B; BOH) promoted by anilinosilanes 1a and 1b. A total of seven examples using two simple alcohols and three R- or β-hydroxyketones indicate its high generality. Time-dependent IR spectroscopy analysis rationally supported this speculation. Experimental Section

We propose the following mechanism for this unique phenomenon (Scheme 3). TMS-A (1a) initially traps catalytic F- to form reactive hypervalent silicate 8,4 which coordinates exclusively toward an acyloin (BOH) over a coexistent simple alcohol (AOH) to form a stable chelate intermediate 10. 10 slowly changes into BO-TMS, whereas the nonchelate intermediate 9 produced in an independent reaction rapidly transforms into AO-TMS. This speculation is supported by the following experimental finding, that is, the existence of the CdO‚‚‚HN interaction based on time-dependent IR spectroscopy analysis between 3 and TMS-A (1a), as depicted in Figure 7. The band shift of both the CdO group of 3 and the NH group of 1a was monitored (4) (a) Corriu, R. J. P.; Young, J. C. In The Chemistry of Organic Silicon Compounds; Patai, S., Rappoport, Z., Eds.; John Wiley: New York, 1989; pp 1241-1288. (b) Tamao, K. J. Synth. Org. Chem. Jpn. 1990, 48, 457. (c) Hatanaka, Y.; Hiyama, T. J. Synth. Org. Chem. Jpn. 1990, 48, 834.

4972 J. Org. Chem., Vol. 72, No. 13, 2007

General. All reactions were carried out in oven-dried glassware under an argon atmosphere. N,N-Dimethylformamide (DMF) was distilled from calcium hydride. Tetrahydrofuran (THF) was distilled from sodium benzophenone ketyl. TLC analysis was performed on 0.25 mm silica gel Merck 60 F254 plates. NMR spectra were recorded on a JEOL DELTA 300 spectrometer, operating at 300 MHz for 1H NMR and 75 MHz for 13C NMR. Chemical shifts (δ, ppm) in CDCl3 were reported downfield from TMS ()0) for 1H NMR. For 13C NMR, chemical shifts were reported in the scale relative to CDCl3 (77.00 ppm) as an internal reference. Flash column chromatography was performed with silica gel Merck 60 (230400 mesh ASTM) according to the method of Still.8 GC data were (5) Colthup, N. B.; Daly, L. H.; Wiberley S. E. Introduction to Infrared and Raman Spectroscopy, 3rd ed.; Academic Press: San Diego, CA, 1990; pp 289 and 339. (6) (a) Morita, S.; Yea, S.; Lic, G.; Osawa, M. Vib. Spectrosc. 2004, 35, 15. (b) Li, D.; Brisson, J. Polymer 1998, 39, 793. (7) Paoloni, L.; Patti, A.; Mangano, F. J. Mol. Struct. 1975, 27, 123. (8) Still, W. C.; Kahn, M.; Mitra, A. J. J. Org. Chem. 1978, 43, 2923.

FIGURE 7. (a) IR spectra of 3 and 3′/THF in the 1680-1740 cm-1 region. (b) Temporal change of IR spectra is continuously measured every 9 s during the reaction, where 1a is added to the mixture of 3 and TBAF/THF to generate 3′ and aniline. (c) Temporal changes of the peak top position of the 1680-1740 cm-1 region. 1a was added to the mixture of 3 + TBAF (O), 3 (2), and 2 + 3 + TBAF (×), respectively. These top peak positions were determined by zero crossing points of the first derivative of the raw spectra as shown in (b) with data interpolation.

obtained on a SIMAZU GC-17A [column, Widebore DB-1701; Ø 0.53 mm × 30 m; oven temp ) 50-250 °C (20 °C/min); injection/ detection (FID) temp ) 250 °C; carrier gas, N2]. IR spectra were recorded on a FT/IR-5300 spectrophotometer. Mass spectra were measured on a T100LC spectrometer. General Procedure For Silylations of Alcohols Using Anilinosilanes [PhNH(TMS)] (TMS-A) 1a and [PhNH(TES)] (TESA) 1b. TMS-A 1a (1.5 mmol) or TES-A 1b (1.5 mmol) was added to a stirred solution of alcohol (1.0 mmol) and TBAF (1 M THF solution, 0.02 mL, 0.02 mmol) in DMF (2.0 mL) at 20-25 °C under an Ar atmosphere. After stirring at the same temperature for 5-60 min, the mixture was quenched with water (5.0 mL), which was extracted with ether. The combined organic phase was washed with water and brine, dried (Na2SO4), and concentrated. The obtained crude product was purified by SiO2 column chromatography (hexane) to give a desired silylether. 3,7-Dimethyl-3-(trimethylsiloxy)-1,6-octadiene (2′),9 3-(triethylsiloxy)-3,7-dimethyl-1,6-octadiene (2′′),10 6-(trimethylsiloxy)-5decanone (3′),11 2-(trimethylsiloxy)-1,2-diphenylethanone (4′),12 3-(trimethylsiloxy)octanone (5′),13 and 5-hydroxy-4-methyl-3-undecanone (6)14 were known compounds. Reversal Phenomenon of Figure 1 (Independent System): TMS-A (1a, 74 mg, 0.45 mmol) was added to a stirred solution of linalool (2, 44 mg, 0.30 mmol) or valeroin (3, 52 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Mixed system: 1a (74 mg, 0.45 mmol) was added to a stirred solution of a mixture of 2 (44 mg, 0.30 mmol), 3 (52 mg, 0.30 mmol), and 1 M TBAF (THF solution, 0.6 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Figure 2 (Independent System): TES-A (1b, 93 mg, 0.45 mmol) was added to a stirred solution of 2 (44 mg, 0.30 mmol) or 3 (52 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Mixed system: 1b (93 mg, 0.45 mmol) was added to a stirred solution of a mixture of 2 (44 mg, 0.30 mmol), 3 (52 mg, 0.30 mmol), and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. (9) Veysoglu, T.; Mitscher, L. A. Tetrahedron Lett. 1981, 22, 1303. (10) Yoshii, E.; Takeda, K. Chem. Pharm. Bull. 1983, 31, 4586. (11) Nishiguchi, I.; Kita, Y.; Watanabe, M.; Ishino, Y.; Ohno, T.; Maekawa, H. Synlett 2000, 1025. (12) Davis, F. A.; Sheppard, A. C. J. Org. Chem. 1987, 52, 954. (13) Mattson, A. E.; Bharadwaj, A. R.; Zuhl, A. M.; Scheidt, K. A. J. Org. Chem. 2006, 71, 5715. (14) Jung, C.-K.; Garner, S. A.; Krische, M. J. Org. Lett. 2006, 8, 519.

Figure 3 (Independent System): 1a (74 mg, 0.45 mmol) was added to a stirred solution of 2 (44 mg, 0.30 mmol) or benzoin (4, 64 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Mixed system: 1a (74 mg, 0.45 mmol) was added to a stirred solution of a mixture of 2 (44 mg, 0.30 mmol), 4 (64 mg, 0.30 mmol), and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Figure 4 (Independent System): 1a (74 mg, 0.45 mmol) was added to a stirred solution of 3-octanol (5, 39 mg, 0.30 mmol) or 3 (52 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Mixed system: 1a (74 mg, 0.45 mmol) was added to a stirred solution of a mixture of 5 (39 mg, 0.30 mmol) and 3 (52 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Figure 5 (Independent System): 1a (74 mg, 0.45 mmol) was added to a stirred solution of 5 (39 mg, 0.30 mmol) or 4 (64 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Mixed system: 1a (74 mg, 0.45 mmol) was added to a stirred solution of a mixture of 5 (39 mg, 0.30 mmol), 4 (64 mg, 0.30 mmol), and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at 0-5 °C under an Ar atmosphere. Figure 6 (Independent System): 1a (74 mg, 0.45 mmol) was added to a stirred solution of 2 (44 mg, 0.30 mmol) or 5-hydroxy4-methyl-3-undecanone (6, 60 mg, 0.30 mmol) and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at -45 to -50 °C under an Ar atmosphere. Mixed system: 1a (74 mg, 0.45 mmol) was added to a stirred solution of a mixture of 2 (44 mg, 0.30 mmol), 6 (60 mg, 0.30 mmol), and 1 M TBAF (THF solution, 6.0 µL, 6.0 µmol) in DMF (0.60 mL) at -45 to -50 °C under an Ar atmosphere.

Acknowledgment. This research was partially supported by Grants-in-Aid for Scientific Research on Basic Areas (B) “18350056”, Priority Areas (A) “17035087” and “18037068”, and Exploratory Research “17655045” from MEXT. Supporting Information Available: 1H and/or 13C NMR spectral chart for compounds 3′′ and 7′. Figures S8 and S9. This material is available free of charge via the Internet at http:// pubs.acs.org. JO070081I

J. Org. Chem, Vol. 72, No. 13, 2007 4973