Selection, Identification, and Binding Mechanism ... - ACS Publications

May 14, 2018 - Collaborative Innovation Center of Food Safety and Quality Control in Jiangsu Province, Jiangnan University, Wuxi 214122, China...
1 downloads 0 Views 1MB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

Food Safety and Toxicology

Selection , Identification and Binding mechanism Studies of an ssDNA Aptamer Targeted to different stages of E.coli O157:H7 Ying Zou, Nuo Duan, Shijia Wu, Mofei Shen, and Zhouping Wang J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.8b01006 • Publication Date (Web): 14 May 2018 Downloaded from http://pubs.acs.org on May 15, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26

Journal of Agricultural and Food Chemistry

1

Selection, Identification and Binding mechanism Studies of an ssDNA

2

Aptamer Targeted to different stages of E. coli O157:H7

3 4

Ying Zou, ab Nuo Duan, ab* Shijia Wu, ab Mofei Shen, ab Zhouping Wang abcd*

5 a

6

State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi 214122, China

7 8

b

School of Food Science and Technology, Jiangnan University, Wuxi 214122, China

9 c

10

International Joint Laboratory on Food Safety, Jiangnan University, Wuxi 214122, China

11 12 13

d

Collaborative innovation center of food safety and quality control in Jiangsu Province, Jiangnan University, Wuxi 214122, China

14

*To whom correspondence should be addressed

15

Tel: +86 510 85917023

16

Fax: +86 510 85917023

17

E-mail: [email protected]; [email protected]

18

1

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 2 of 26

19

ABSTRACT: Enterohemorrhagic Escherichia coli O157:H7 (E. coli O157:H7) is

20

known as an important food-borne pathogens related to public health. In this study,

21

aptamers which could bind to different stages of E. coli O157:H7 (adjustment phase,

22

log phase and stationary phase) with high affinity and specificity was obtained by

23

Whole Cell-SELEX method through fourteen selection rounds including three

24

counter-selection rounds. Altogether, thirty-two sequences were obtained and nine

25

families were classified to select the optimal aptamer. To analyze affinity and

26

specificity by flow cytometer, an ssDNA aptamer named Apt-5 was picked out as the

27

optimal aptamer that recognize different stages of E. coli O157:H7 specifically with

28

the Kd value of 9.04 ± 2.80 nM. In addition, in order to study the binding mechanism,

29

target bacteria were treated by proteinase K and trypsin, indicating that the specific

30

binding site is not protein on cells membrane. Furthermore, we treated E. coli

31

O157:H7 with EDTA, the result showed that the binding site might be

32

lipopolysaccharide (LPS) on outer membrane of E. coli O157:H7.

33

KEYWORDS: aptamer, E. coli O157:H7, SELEX, flow cytometry, proteinase

34

2

ACS Paragon Plus Environment

Page 3 of 26

Journal of Agricultural and Food Chemistry

35

INTRODUCTION:

36

Enterohemorrhagic Escherichia coli (EHEC) is an important food-borne

37

pathogens related to public health, it has posed serious public health hazard all around

38

the world. E. coli O157 is the most frequently studied serotype and most potent

39

among EHEC.1,2 It can cause haemolytic uraemic syndrome (HUS) mainly by

40

secretion of Shiga toxins encoded by the genes stx1 or stx2 and variants.3-5 Therefore,

41

it is quite important to develop a rapid, sensitive and cost-effective analysis method

42

for E. coli O157:H7.

43

Aptamer is a short single-stranded DNA (ssDNA) or RNA sequence selected by

44

systematic evolution of ligands by an exponential enrichment (SELEX), which was

45

initially introduced by the groups of Ellington6 and Tuerk7. Aptamers can be selected

46

for a variety of targets from small molecules to whole organisms, including ions,8,9

47

toxins10-12 and pathogens13,14 related to food safety. Aptamers show the following

48

significant advantages compared with antibodies: rapid and efficient recognition,

49

economical and facile preparation, a wide range of targets, stability during storage and

50

functionalization with flexibility. Owing to its excellent characters with high

51

sensitivity and high specificity, aptamer can be used as recognition elements in many

52

fields of detection system.

53

Aptamers against E. coli O157:H7 have been reported in these years. Young Ju

54

Lee15 used Cell-based subtractive SELEX technology obtained an RNA aptamer with

55

Kd value of 110 nM through 6 rounds of selection, which RNA aptamers against E.

56

coli O157:H7 was originally reported. Compared to DNA aptamers, RNA aptamers

3

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 4 of 26

57

have more flexible structures, which allow them for more complex folding and more

58

diverse configurations with target molecules, with unique advantages in the field of

59

small molecule detection. However, non-chemically modified RNA aptamers were

60

degraded rapidly because of their poor biological stability. Thus the production of

61

RNA aptamers is more expensive and rather complex compared with ssDNA due to

62

the necessity of modification for stabilization. Masoum Amraee16 also used

63

subtractive SELEX technology to obtain an ssDNA aptamer against E. coli O157:H7

64

through six rounds.

65

In this study, we applied the Whole Cell-SELEX technique to select aptamers

66

against E. coli O157:H7. Considering that bacterial outer membrane structure may be

67

different at different periods, we used different periods E. coli O157:H7 (adjustment

68

phase, log phase and stationary phase) as multi-target, so that in the actual sample

69

detection, the aptamer can accurately identify the bacteria in every period and

70

improve the accuracy in detection. Through fourteen selection rounds, an aptamer that

71

can recognize different stages of E.coli O157:H7 specifically with the Kd value of

72

9.04 ± 2.80 nM was obatained.

73

However, we didn’t know the specific binding site between aptamers and

74

bacteria due to the Whole Cell-SELEX technique. In order to study the binding

75

mechanism, we did a further research on E. coli O157:H7. We treated the bacteria

76

with proteinase and EDTA to see where the specific binding site might be. This is the

77

first time to report DNA aptamer against different stages of E. coli O157:H7 and

78

do preliminary study on binding mechanism. It provides theoretical guidance for the

4

ACS Paragon Plus Environment

Page 5 of 26

Journal of Agricultural and Food Chemistry

79

design, screening and performance evaluation of aptamers. The results have a positive

80

effect on aptamers’ application.

81

MATERIALS AND METHODS

82

Bacterial strains and reagents. The bacterial strains used for experiment were

83

obtained from the American Type Culture Collection (ATCC). E. coli O157:H7

84

(ATCC 03820) was used as the target strain, Salmonella typhimurium (ATCC 10420),

85

Staphylococcus aureus (ATCC 29213), Escherichia coli (ATCC 25922), Shigella

86

flexneri

87

jiagang

88

counter strains, and also for specificity studies. All bacteria were grown in Luria

89

Bertani (LB) culture medium (10 g peptone, 5 g NaCl and 5 g yeast extract per 1 L,

90

pH 7.2-7.4) under aerobic conditions at 37℃, and all liquid cultures were shaken at

91

120 rpm.

(ATCC

12022),

Escherichia coli

ETEC

(Provided

by

Zhang

Entry-Exit Inspection and Quarantine Bureau) were used as negative,

92

All chemicals for preparing the buffers and solutions were purchased from

93

Sinopharm Chemical Reagent Co., Ltd. (Shanghai, China). Bacteria were washed

94

before and after incubation with 1×binding buffer (1×BB,50 mmol/L Tris-HCl (pH

95

7.4), 5 mmol/L KCl, 100 mmol/L NaCl, 1 mmol/L MgCl2). Buffer used for selection

96

was prepared by adding excessive yeast tRNA (purchased from Sigma-Aldrich

97

Company) and BSA (1 mg/mL) into binding buffer to reduce background binding.

98

1×TE buffer (10 mmol/L Tris-HCl,1 mmol/L EDTA,pH 7.4) was used for dissolving

99

ssDNA and primers. All the buffers must be sterilized in case of contamination.

100

The PCR components including PCR buffer, dNTPs and Taq DNA polymerase

5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 6 of 26

101

were purchased from Shanghai Sangon Biological Science & Technology Company

102

(Shanghai, China). The lambda exonuclease and 1×lambda exonuclease reaction

103

buffer were purchased from New England Biolabs (Hitchin, UK). The polyacrylamide

104

gel electrophoresis (PAGE) components, such as the acrylamide/bis-acrylamide 30%

105

solution, were purchased from Sigma-Aldrich Company (St. Louis, MO, USA), and

106

both ammonium persulfate and TEMED were purchased from Shanghai Sangon

107

(Shanghai, China). The solutions were prepared with ultra-high purity water from a

108

Millipore water purification system.

109

Initial ssDNA library and primers. The initial ssDNA library was synthesized

110

by Integrated DNA Technologies (IDT). A single stranded 80-mer consists a central

111

randomised sequence of 40 nucleotides (nt) flanked by two primer hybridization sites

112

(5’-TGA GCC CAA GCC CTG GTA TG-N40-GGC AGG TCT ACT TTG GGA

113

TC-3’). The primers used for amplification were synthesized by Shanghai Sangon

114

(Shanghai, China). Based on the standard primer considerations, FAM-labeled

115

forward primer and phosphorylated reverse primer were designed as (5’-FAM-TGA

116

GCC CAA GCC CTG GTA TG-3’) and (5’-P-GAT CCC AAA GTA GAC CTG

117

CC-3’), respectively.

118

Bacterial culture. In order to obtain target bacteria in different phases, the

119

growth curve of bacteria was determined. E. coli O157:H7 were grown in LB culture

120

medium under aerobic conditions at 37˚C with shaking at 120 rpm. The growth rate

121

was traced by measuring the optical density (OD) at 600 nm using a UV-1800

122

spectrophotometer. Then drawing a growth curve of E. coli O157:H7 (Figure 1) based

6

ACS Paragon Plus Environment

Page 7 of 26

Journal of Agricultural and Food Chemistry

123

on the data. To get multi-target, different stages of bacteria (OD600 = 0.1, OD600 = 0.5,

124

OD600 = 1.3) were obtained based on growth curve, then centrifugated at 5000 rpm for

125

5 min to remove the supernatant and wash two times, re-suspended in binding buffer

126

to a density of 108 cfu/mL in preparation for SELEX selection.

127

In vitro selection. Aptamer candidates against E. coli O157:H7 were selected

128

using the SELEX protocol based on Duan17,18 with slight modifications. Before

129

selection the ssDNA library was denatured by heating at 95˚C for 5 min then snap

130

cooled on ice for 10 min to prevent intra-strand base pairing. For the first round,

131

SELEX was initiated with 1 nmol of random ssDNA library and incubated with a total

132

of 108 E. coli O157:H7 cells in binding buffer at 37˚C for 1 h with gentle shaking. An

133

excess of tRNA and BSA was added to the incubation buffer to reduce nonspecific

134

binding. The tRNA is present to compete with the aptamer sequences for target

135

binding sites. Following incubation, the cells were centrifuged at 5000 rpm at 4˚C for

136

5 min, the supernatants were removed, and the cells were washed twice in 300 µL of

137

1× BB before a final resuspension in 300 µL of 1× PCR reaction buffer. The cells were

138

then heated at 95˚C for 10 min and placed on ice for 10 min to denature and elute

139

cell-bound aptamers. The mixture was then centrifuged at 8000 rpm at 4˚C for 8 min,

140

and the supernatant was isolated and designated the cell-bound aptamer fraction. All

141

fractions collected were amplified by PCR.

142

A total of 50 µL PCR mixture consisted of 1 µL of ssDNA template, 0.5 µL of

143

forward primer (10 µM ), 0.5 µL of reverse primer (10 µM ), 1 µL of dNTP (5 mM ), 0.5

144

µL of Taq DNA polymerase (5 U/ µL ), 5 µL of 10×PCR buffer, and 42.5 µL of

7

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 8 of 26

145

ultrapure water. The thermal cycle parameter was denatured at 95˚C for 5 min,

146

followed by 16 cycles of denaturation at 95˚C for 30 s, annealing at 56˚C for 30 s, and

147

extension at 72˚C for 30 s, then extension at 72˚C for 1 min and cooled at 4˚C. Next,

148

8% polyacrylamide gel electrophoresis was used to verify PCR products. After being

149

stained with Gel-red, the gel was photographed under UV light to confirm the 80 bp

150

size of PCR products. The PCR products were purified with a Generay PCR

151

Purification Kit.

152

To obtain the ssDNA pool for the next selection round, aphosphorylated reverse

153

strand of double-stranded DNA was digested by lambda exonuclease. The

154

concentration of purified PCR product was quantified by a NanoDrop 2000

155

spectrophotometer to calculate the amount of lambda exonuclease and exonuclease

156

reaction buffer. The digestion was conducted at 37˚C for 40 min, 75˚C for 10 min, and

157

then identified by 8% denaturing polyacrylamide gel electrophoresis. The digestion

158

products were purified by a phenol chloroform method and used for the sublibrary in

159

the next selection rounds. The selection procedure was repeated until the fourteen

160

round of PCR amplification including three counter selection rounds was completed.

161

Cloned, sequencing and analysis of sequences. After the 14th round of

162

selection, the products were cloned to obtain sequences by Sangon Biotechnology

163

(Shanghai, China). The homology of sequences was analyzed with DNAMAN

164

software, and their secondary structures were predicted by Mfold software. Based on

165

the homology and secondary structures, thirty-two sequences were divided into nine

166

families, and the aptamer candidates with highest enrichment and lower free energy of

8

ACS Paragon Plus Environment

Page 9 of 26

Journal of Agricultural and Food Chemistry

167

formation ∆G in each family were picked out for the binding assay. Then nine

168

sequences were synthesized with a carboxyfluorescein (FAM) fluorescence label at

169

the 5’end.

170

Identification of affinity and specificity by flow cytometer. Nine fluorescently

171

labeled aptamer sequences were incubated with E. coli O157:H7 at 37˚C for 90 min

172

and were analyzed by flow cytometry. To determine the binding affinity of the

173

selected aptamers to the target E. coli O157:H7 cells, we performed binding assays as

174

described above with increasing amounts of a single aptamer (from 10 nM to 200 nM)

175

and a constant amount of cells (108 cfu/mL) for each assay. After obtaining

176

fluorescence measurements, saturation curves were calculated from these data and the

177

dissociation constant Kd was calculated by nonlinear regression analysis. In order to

178

identify the affinity of aptamer with each growth stage, different stages bacteria

179

(OD600 = 0.1, OD600 = 0.5, OD600 = 1.3) were incubated with fluorescently labeled

180

aptamer, respectively.

181

Proteinase Treatment for Bacteria. To study the binding mechanism, E.coli

182

O157:H7 were treated by trypsin and proteinase K .The procedure was based on a

183

previously published method19,20 with some modifications,

184

(OD600 = 0.1, OD600 = 0.5, OD600 = 1.3) were obtained, centrifugated at 5000 rpm for 5

185

min to remove the supernatant and wash two times, then incubated with 1 mL of

186

0.25% trypsin and 0.1 mg/mL proteinase K in 1×BB at 37˚C for 10 and 30 min

187

respectively. After incubation, the mixture was centrifugated and washed to remove

188

excess enzyme, and the treated bacteria were incubated with 100 nM FAM-labeled

different stages bacteria

9

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 10 of 26

189

aptamer for further flow-cytometric analysis. Furthermore, in order to do a further

190

research on binding mechanism, E. coli O157:H7 were treated by EDTA according to

191

Loretta Leive21 method with slight improvement. Different stages bacteria (OD600 =

192

0.1, OD600 = 0.5, OD600 = 1.3) were obtained, centrifugated at 5000 rpm for 5 min,

193

then incubated with 5 mM EDTA for 5 min at 37˚C, the incubation was terminated by

194

adding MgCl2. After centrifugating and washing, incubated with 100 nM

195

FAM-labeled aptamer for further flow-cytometric analysis finally.

196

RESULTS AND DISCUSSION

197

Aptamer Selection. In order to improve the affinity and specificity of the

198

aptamer selection, the experimental conditions were varied with the increase of

199

selection round, ssDNA pool was reduced from 1 nmol to 100 pmol, the amount of

200

tRNA and BSA increased from a 20-fold molar excess of each in the initial round to a

201

maximum of 80-fold molar excess in round eight. Increased amounts of BSA/tRNA

202

increased the competition between the desired targets (cells) and non-targets (BSA

203

molecules) for the aptamer molecules, tRNA competes with the aptamer sequences for

204

target binding sites, leading to higher specificity. Besides, counter selection was done

205

in 5, 9 and 12 rounds with a mixture of related intact pathogenic bacteria (Salmonella

206

typhimurium,

207

Escherichia coli ETEC). The products of each round for selection was monitored

208

using flow cytometry. As shown in Figure 2, with increasing rounds of selection, The

209

fluorescence intensity gradually increased, except for the counter-SELEX round. The

210

decreased fluorescence intensity may be resulted from a part of ssDNA bound with

Staphylococcus

aureus,

Escherichia

coli, Shigella

flexneri,

10

ACS Paragon Plus Environment

Page 11 of 26

Journal of Agricultural and Food Chemistry

211

counter-targets in counter-SELEX. The selection was finished in the fourteenth round

212

when we observed that the fluorescence intensity started to saturate and reached a

213

maximum average of 76.70% at fourteenth round. Therefore, the PCR products from

214

the fourteenth round were cloned and sequenced.

215

Binding affinity and specificity. Altogether, thirty-two sequences were obtained

216

by cloning and sequencing, and according to homology and secondary structures, nine

217

families were classified. One representative aptamer candidate with high enrichment

218

and lower energy was synthesized with a FAM label for the binding assay from each

219

family. From the Kd values results shown in Table 1, it is demonstrated that, among

220

nine candidate aptamers, five of them (Apt-1、Apt-3、Apt-4、Apt-5、Apt-7) show the

221

stronger binding affinity with E. coli O157:H7. Therefore, these five aptamers were

222

selected as the aptamer probe against E. coli O157:H7 for the following specificity

223

detections. To characterise the specificity of the selected aptamer, FAM-labelled five

224

aptamers were tested against a variety of other bacteria(108 cfu/mL,OD600 = 0.3),

225

including Salmonella typhimurium , Staphylococcus aureus , Escherichia coli ,

226

Shigella flexneri , and Escherichia coli ETEC. As shown in Figure 3, both sequence

227

Apt-4 and Apt-5 showed preferential binding to E. coli O157:H7 with the

228

average flourescence intensity approaching 80%, but sequence Apt-4 appeared

229

higher binding to other bacteria, especially Salmonella typhimurium and Escherichia

230

coli. By contrast, the binding affinity of sequence Apt-5 to other counter-targets was

231

all below 16%. Thus, aptamer Apt-5 was determined as the optimal aptamer for E.

232

coli O157:H7 due to the lowest Kd values and better specificity. The saturation curve

11

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

233

Page 12 of 26

and predicted secondary structure of aptamer Apt-5 are shown in Figure 4.

234

In order to identify the affinity of aptamer with each growth stage, different

235

stages bacteria (OD600 = 0.1, OD600 = 0.5, OD600 = 1.3) were incubated with

236

fluorescently labeled aptamer, respectively. As shown in Figure 5, the result shows

237

that Apt-5 has good affinity to all different stages bacteria (adjustment phase, log

238

phase and stationary phase).

239

The binding mechanism. We obtained the high affinity and specificity aptamer

240

Apt-5 by Whole Cell-SELEX technique. However, we didn’t know the specific

241

binding site between Apt-5 and bacteria. In order to study the binding mechanism, we

242

did a further research on E. coli O157:H7 to explore the binding mechanism. We

243

treated the bacteria with proteinase K and trypsin to destroy bacterial surface

244

membrane protein. If the fluorescence signal reduces, the target of the aptamer may be

245

protein molecules on bacterial cell wall. However, as Figure 6A shows, when treated

246

by proteinase K and trypsin (15 min) , the signal did not change too much than

247

untreated, and with the increasing of treatment duration (30 min), the signal still keep

248

the same fluorescence intensity than untreated, this result suggested that the target

249

might not be membrane protein, but other cell wall composition. In order to

250

continue to study the binding mechanism, we treated E. coli O157:H7 with EDTA.

251

According to Loretta Leive21 study, EDTA treatment makes LPS released, leading to

252

the remain LPS on membrane reduced. As the Figure 6B shown, the signal is weaker

253

than untreated, thus we deduce that the target might be LPS.

254

In conclusion,this study described using whole-bacterium SELEX to screen the

12

ACS Paragon Plus Environment

Page 13 of 26

Journal of Agricultural and Food Chemistry

255

DNA aptamer with high affinity and specificity for different stages of E. coli

256

O157:H7, it is the first report of using different stages of E. coli O157:H7 as targets

257

and doing a further research on binding mechanism. Considering that bacteria in

258

different phases may have different surface membrane properties, we used different

259

stages of E. coli O157:H7 as target each round so that the aptamer can bind to any

260

times of E. coli O157:H7, expanding the range of targets and improving the accuracy

261

in the actual sample detection. In addition, we did a further research on binding

262

mechanism, the experiments with proteinase and EDTA treatment suggest that the

263

target of the aptamer might not be membrane protein molecules but LPS. The work

264

described in this study demonstrates the ability of whole-bacteria SELEX to screen an

265

excellent aptamer probe to detect the existence of E. coli O157:H7 and has the

266

potential in food safety control.

267

13

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 14 of 26

268

AUTHOR INFORMATION

269

Corresponding Author

270

*Tel: +86 510 85917023, Fax: +86 510 85917023

271

E-mail: [email protected]; [email protected]

272

Funding

273

This work was partially supported by Key Research and Development Program of

274

Jiangsu Province (BE2016306), National Nature Science Foundation of China (NSFC

275

31401575), and Project funded by China Postdoctoral Science Foundation

276

(2017M610299, 2016T90430).

277

14

ACS Paragon Plus Environment

Page 15 of 26

Journal of Agricultural and Food Chemistry

278

REFERENCES

279

(1) Hartland, E. L.; Leong, J. M. Enteropathogenic and enterohemorrhagic E. coli:

280

ecology, pathogenesis, and evolution. Front Cell Infect Microbiol. 2013, 3, 15.

281

(2) Perna, N. T.; Plunkett, G.; Burland, V. & 25 other authors. Genome sequence of

282

enterohaemorrhagic Escherichia coli O157:H7. Nature. 2001, 409, 529-533.

283

(3) Karmali, M. A.; Arbus, G. S.; Petric, M.; Patrick, M. L.; Roscoe, M.; Shaw, J. &

284

Lior, H.. Hospital-acquired Escherichia coli O157:H7 associated haemolytic uraemic

285

syndrome in a nurse. Lancet. 1988, 1, 526.

286

(4) Pierard, D.; Muyldermans, G.; Moriau, L.; Stevens, D. & Lauwers, S.

287

Identification of new verocytotoxin type 2 variant B-subunit genes in human and

288

animal Escherichia coli isolates. J Clin Microbiol. 1998, 36, 3317-3322.

289

(5) Tesh, V. L.; O’Brien, A. D. The pathogenic mechanisms of Shiga toxin and the

290

Shiga-like toxins. Mol Microbiol. 1991, 5, 1817-1822.

291

(6) Ellington, A. D.; Szostak, J. W. Selection in vitro of single-stranded DNA

292

molecules that fold into specific ligand-binding structures. Nature. 1992, 355,

293

850-852.

294

(7) Tuerk, C.; Gold, L. Systematic evolution of ligands by exponential enrichment:

295

RNA ligands to bacteriophage T4 DNA polymerase. Science. 1990, 249, 505-510.

296

(8) Bruno, J. G.; Kiel, J. L. In vitro selection of DNA aptamers to anthrax spores with

297

electrochemiluminescence detection. Biosens Bioelectron. 1999, 14, 457-64.

298

(9) Fang, X. H.; Sen, A.; Vicens, M; Tan., W. H. Synthetic DNA aptamers to detect

299

protein molecular variants in a high-throughput fluorescence quenching assay.

15

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 16 of 26

300

Chembiochem 2003, 4, 829-34.

301

(10) Cruz-Aguado, J. A.; Penner, G. Determination of Ochratoxin A with a DNA

302

Aptamer. J. Agric. Food Chem. 2008, 56(22), 10456-10461.

303

(11) Tang, J. J.; Yu, T.; Guo, L.; Xie, J. W.; Shao, N. S.; He, Z. K. In vitro selection of

304

DNA aptamer against abrin toxin and aptamer-based abrin direct detection. Biosens

305

Bioelectron. 2007, 22(11), 2456-2463.

306

(12) Tok, J. B. H.; Fischer, N. O. Single microbead SELEX for efficient ssDNA

307

aptamer generation against botulinum neurotoxin. Chemical Communications. 2008,

308

16, 1883-1885.

309

(13) Bruno, J. G.; Kiel, J. L. In vitro selection of DNA aptamers to anthrax spores

310

with electrochemiluminescence detection. Biosens Bioelectron. 1999, 14(5), 457-464.

311

(14) Joshi, R.; Janagama, H.; Dwivedi, H. P.; Kumar, T. M. A. S.; Jaykus, L. A.;

312

Schefers, J.; Sreevatsan, S. Selection, characterization, and application of DNA

313

aptamers forthe capture and detection of Salmonella enterica serovars. Molecular and

314

CellularProbes. 2009, 23(1), 20-28.

315

(15) Lee, Y. J.; Han, S. R.; Maeng, J. S.; Cho, Y. J.; Lee, S. W. In vitro selection of

316

Escherichia coli O157:H7 specific RNA aptamer. Biochem. Biophys. Res. Commun.

317

2012, 417, 414-420.

318

(16) Amraee, M.; Oloomi, M.; Yavari, A.; Bouzari, S. DNA aptamer identification and

319

characterization for E. coli O157 detection using cell based SELEX method.

320

Analytical Biochemistry. 2017, 536, 36-44.

321

(17) Duan, N.; Wu, S. J.; Chen, X. J. Selection and Identification of a DNA Aptamer

16

ACS Paragon Plus Environment

Page 17 of 26

Journal of Agricultural and Food Chemistry

322

Targeted to Vibrio parahemolyticus. J. Agric. Food Chem. 2012, 60, 4034-4038.

323

(18) Duan, N.; Wu, S. J.; Chen, X. J. Selection and Characterization of Aptamers

324

against Salmonella typhimurium Using Whole-Bacterium Systemic Evolution of

325

Ligands by Exponential Enrichment (SELEX). J. Agric. Food Chem. 2013, 61,

326

3229-3234.

327

(19) Chen, F.; Zhou, J.; Luo, F. L.; Mohammed, A. B.; Zhang, X. L. Aptamer from

328

whole-bacterium SELEX as new therapeutic reagent against virulent Mycobacterium

329

tuberculosis. Biochem. Biophys. Res. Commun. 2007, 357, 743-748.

330

(20) Shangguan, D.; Li, Y.; Tang, Z.; Cao, Z. C.; Chen, H. W.; Mallikaratchy, P.;

331

Sefah, K.; Yang, C. J.; Tan, W. Aptamers evolved from live cells as effective

332

molecular probes for cancer study. Proc. Natl. Acad. Sci. 2006, 103, 11838-11843.

333

(21) Leive, L. Release of lipopolysaccharide by EDTA treatment of E.coli.

334

Biochemical And Biophysical Research Communications. 1965, 21(4), 290-296.

335

17

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 18 of 26

336

Figure legends:

337

Figure 1. Growth curve of E. coli O157: H7.

338

Figure 2. The fluorescence intensity of each seletion round.

339

Figure 3. Identification of the specificity of Apt-5 against E. coli O157:H7: (A)

340

histogram of the percent gated fluorescence intensity above library background for

341

individual aptamers; (B) flow cytometry assay for the binding of aptamers to bacteria.

342

Figure 4. The secondary structure predicted by Mfold software and corresponding

343

saturation curve of aptamer Apt-5.

344

Figure 5. Identification of the affinity of Apt-5 against three different stages E. coli

345

O157:H7.

346

Figure 6. Binding mechanism studies of Apt-5 against three different stages E. coli

347

O157:H7: (A) Treatment with proteinase K and trypsin for 15 min and 30 min,

348

respectively; (B) Treatment with EDTA.

349

18

ACS Paragon Plus Environment

Page 19 of 26

Journal of Agricultural and Food Chemistry

350

Table 1. Sequence (5’-3’) and dissociation constants Kd values of aptamer candidates.

351 352 353 354 355 356

19

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 20 of 26

357 358

Figure 1

20

ACS Paragon Plus Environment

Page 21 of 26

Journal of Agricultural and Food Chemistry

359 360

Figure 2

361 362

21

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 22 of 26

A

B

363 364

Figure 3

365

22

ACS Paragon Plus Environment

Page 23 of 26

Journal of Agricultural and Food Chemistry

366 367

Figure 4

368

23

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 24 of 26

369 370

Figure 5

371

24

ACS Paragon Plus Environment

Page 25 of 26

Journal of Agricultural and Food Chemistry

372 373

Figure 6

25

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

374

Page 26 of 26

Graphic for table of contents

375

26

ACS Paragon Plus Environment