Smallest Bimetallic CoPt3 Superparamagnetic Nanoparticles - The

Sep 27, 2016 - ...
6 downloads 12 Views 2MB Size
Subscriber access provided by UNIV OF CALIFORNIA SAN DIEGO LIBRARIES

Letter

The Smallest (1.6 nm) Bimetallic CoPt3 Superparamagnetic Nanoparticles Mohamed Karmaoui, Joao S Amaral, Luc Lajaunie, Harinarayanan Puliyalil, David Maria Tobaldi, Robert C. Pullar, João António Labrincha, Raul Arenal, and Uros Cvelbar J. Phys. Chem. Lett., Just Accepted Manuscript • DOI: 10.1021/acs.jpclett.6b01768 • Publication Date (Web): 27 Sep 2016 Downloaded from http://pubs.acs.org on September 28, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

The Journal of Physical Chemistry Letters is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

The Smallest Bimetallic CoPt3 Superparamagnetic Nanoparticles Mohamed Karmaoui,a* J. S. Amaral,b Luc Lajaunie,c Harinarayanan Puliyalil,d,e David M. Tobaldi,f Robert C. Pullar, f,g João A. Labrincha,f Raul Arenal,c,h and Uroš Cvelbar d,e

a

School of Chemistry-College of Engineering and Physical Sciences-University of Birmingham Edgbaston, Birmingham B15 2TT UK b

c

Department of Physics / CICECO – Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal

Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, 50018 Zaragoza, Spain d

e

f

Department F4, Jozef Stefan Institute, Jamova cesta 39, Ljubljana-1000, Slovenia

Jozef Stefan international Postgraduate School, Jamova cesta 39, Ljubljana-1000, Slovenia

Department of Materials and Ceramic Engineering / CICECO – Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal g

Department of Materials, Imperial College London, London, SW7 2AZ, UK h

ARAID Foundation, 50018 Zaragoza, Spain

1 ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 23

Abstract We present for the first time a non-aqueous sol–gel route to produce ultra-small (< 2 nm) magnetic bimetallic CoPt3 nanoparticles (NPs). The one-pot procedure is carried out at low-temperature (180 ºC) using benzyl alcohol, acting as both reducing agent and solvent. The highly monodisperse CoPt3 NPs were investigated with innovative advanced x-ray methods (whole powder pattern modelling, WPPM), HR-TEM, XPS and SQUID magnetometry. XPS showed Co was mostly in metallic form, but with a very small amount of CoO on the NP surface. The spherical NPs had an ultra-small diameter of 1.6 nm, and could self-assemble in aligned linear chains, or nanobelts, of single NPs. They are superparamagnetic, with blocking temperature ~20 K, and coercivity at 10 K of 27.9 kA m-1 (~350 Oe). However, there is evidence of a second magnetic phase (probably CoO) in the ZFC magnetisation curve, which enhances their magnetisation values, without significantly affecting their superparamagnetism.

2 ACS Paragon Plus Environment

Page 3 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

TOC

Keywords: Sol-Gel Process, Solvothermal Synthesis, Bimetallic Nanocrystals, HR-STEM/HAADF, XPS, Coercivity

3 ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 23

General interest in magnetic nanoparticles (MNPs) has grown due to the need generated by novel biomedical, diagnostic and therapeutic applications, which require combinations of electrochemical and other multifunctional properties. As a part of this research flow, bimetallic nanoparticles (NPs) have emerged for applications in the fields of heterogeneous catalysis, electrochemistry, magnetic storage, spintronics, biomaterials and biomedical systems.1-5 As an example, high-coercivity magnetic NPs, especially FePt and CoPt alloys, have in particular attracted much attention, due to applications in magnetic recording6 or as components for rare-earth-free permanent magnet composites (this is depending on size, composition or shape of the bimetallic NPs).7 It is also well known that all these factors exhibit a strong influence on the catalytic and ferromagnetic properties of bimetallic CoPt3 NPs.8-13 It is essential to understand the relationship between NP synthesis and the resultant properties. Moreover, the tendency is to achieve the goal of a single domain within one NP, which will allow the tailoring of resulting magnetic properties. Therefore, making ultra-small NPs (below the single magnetic domain size limit), with a narrow size distribution (monodisperse), is crucial in order to increase the maximum information density in magnetic recording, to optimise the magnetic coupling, and increase the volume of soft magnetic phase in permanent magnet nanocomposites. To this end, we selected cobalt-platinum (CoPt3) NPs as an object of study. Reviewing potential synthesis methods, many chemical and physical processes have been developed over the years to accomplish a controlled synthesis of such NPs. These methods can be classified into several different synthetic approaches, including impregnation methods,14 solution phase synthesis,15 wet chemical routes with organometallic approaches,16 simultaneous reduction/thermal decomposition,17-18 pulsed laser deposition (PLD),19 synthesis in ionic liquids,20 transmetalation reactions synthesis,21 polyol processing,9 plasma processing22-24 or hybrid processing with liquids and plasma.25-26 Recently, the most interesting route to date was reported, where monodisperse MPt (M = Fe, Co, Ni, Cu, Zn) NPs were prepared from the oleylamine reduction of metal salts. The particles were an egg-like shape, and 9.5 nm in diameter.27 4 ACS Paragon Plus Environment

Page 5 of 23

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

However, none of the existing methods yielded satisfactorily small bimetallic NPs. Therefore, we have to explore new potential routes of controlled synthesis. In general, going back to solid state ionics, alcohols and amines can all serve as the reactant source to ensure fast reduction of various metal salts. Among these options, benzyl alcohol offers a unique example, since it can serve as both the reducing agent and stabilizer at low temperatures, to produce different metal/bimetal NPs with small sizes and variable shape.28 In the frame of a non-aqueous approach, the preparation of a large diversity of NPs by the benzyl alcohol route has been demonstrated over the last few years, including the preparation of hybrid materials,29-30 titanium metal oxides31 and alkalineearth/transition metal aluminate NPs.32-33 Here we present a completely new route for producing metal and bimetal NPs by means of a non-hydrolytic sol-gel method. With this we answer the challenge of low-temperature synthesis for the production of stable, consistently sized and shaped, and highly crystalline ultra-small magnetic bimetallic CoPt3 NPs. This process in general relates to an advanced method for the production of magnetic metal and bimetallic NPs.34 The “benzyl alcohol route” presented here is able to produce magnetic bimetallic CoPt3 NPs with ultra-small crystal size as well as spherical shape. In comparison with other existing methods, it can yield high quality particles of a very small spherical size (