Subscriber access provided by ORTA DOGU TEKNIK UNIVERSITESI KUTUPHANESI
Article
Sulfur isotopic fractionation of carbonyl sulfide during degradation by soil bacteria Kazuki Kamezaki, Shohei Hattori, Takahiro Ogawa, Sakae Toyoda, Hiromi Kato, Yoko Katayama, and Naohiro Yoshida Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.5b05325 • Publication Date (Web): 11 Mar 2016 Downloaded from http://pubs.acs.org on March 21, 2016
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 39
Environmental Science & Technology
1
Sulfur isotopic fractionation of carbonyl sulfide during
2
degradation by soil bacteria
3 4
Kazuki Kamezakia,*, Shohei Hattoria,*, Takahiro Ogawab, Sakae Toyodac, Hiromi Katod,
5
Yoko Katayamab, and Naohiro Yoshidaa,e
6 7 8
a
9
Technology, 4259, Nagatsuta-cho, Midori-ku, Yokohama, Kanagawa 226-8502, Japan
Department of Environmental Chemistry and Engineering, Tokyo Institute of
10
b
11
Harumicho, Fuchu, Tokyo 183-0057, Japan
12
c
13
4259, Nagatsuta-cho, Midori-ku, Yokohama, Kanagawa 226-8502, Japan
14
d
15
Sendai 980-8577, Japan
16
e
17
Meguro-ku, Tokyo 152-8550, Japan
Graduate School of Agriculture, Tokyo University of Agriculture and Technology, 3-8-1
Department of Environmental Science and Technology, Tokyo Institute of Technology, Graduate School of Life Sciences, Tohoku University, 2-1-1 Katahira, Aoba-Ku,
Earth-Life Science Institute, Tokyo Institute of Technology, 2-12-1-IE-1 Ookayama,
18 19
Corresponding authors:
20
Kazuki Kamezaki:
[email protected]; Tel: +81-45-924-5506
21
Shohei Hattori:
[email protected]; Tel: +81-45-924-5506
22
23
1
ACS Paragon Plus Environment
Environmental Science & Technology
Page 2 of 39
24
ABSTRACT: We performed laboratory incubation experiments on the degradation of
25
gaseous phase carbonyl sulfide (OCS) by soil bacteria to determine its sulfur isotopic
26
fractionation constants (34ε). Incubation experiments were conducted using strains
27
belonging to the genera Mycobacterium, Williamsia and Cupriavidus, isolated from
28
natural soil environments. The
29
0.19‰, −3.57 ± 0.22‰ and −3.56 ± 0.23‰ for Mycobacterium spp. strains THI401,
30
THI402, THI404 and THI405; −3.74 ± 0.29‰ for Williamsia sp. strain THI410; and
31
−2.09 ± 0.07‰ and −2.38 ± 0.35‰ for Cupriavidus spp. strains THI414 and THI415.
32
Although OCS degradation rates divided by cell numbers (cell-specific activity) were
33
different among strains of the same genus, the
34
significant differences. Even though the numbers of bacterial species examined were
35
limited, our results suggest that 34ε values for OCS bacterial degradation depend not on
36
cell-specific activities, but on genus-level biological differences, suggesting that
37
values are dependent on enzymatic and/or membrane properties. Taking our
38
as representative for bacterial OCS degradation, the expected atmospheric changes in
39
δ34S values of OCS range from 0.5 to 0.9‰, based on previously reported decreases in
40
OCS concentrations at Mt. Fuji, Japan. Consequently, tropospheric observation of δ34S
41
values for OCS coupled with 34ε values for OCS bacterial degradation can potentially be
34
ε values determined were −3.67 ± 0.33‰, −3.99 ±
34
ε values for same genus showed no
2
ACS Paragon Plus Environment
34
34
ε
ε values
Page 3 of 39
Environmental Science & Technology
42
used to investigate soil as an OCS sink.
43
44
1. Introduction
45
Carbonyl sulfide (OCS) is the most abundant gas containing sulfur in the
46
ambient atmosphere, with an average mixing ratio of 500 parts per trillion by volume in
47
the troposphere.1 OCS average residence time in the troposphere is more than two
48
years,2 which enables it to be transported to the stratosphere, where it is converted to
49
stratospheric sulfate aerosols (SSA) through atmospheric sink reactions.3 Hence, OCS is
50
considered to be an important sulfur source for SSA, playing a significant role in the
51
Earth’s radiation budget, and in ozone depletion.4–6 Because of uncertainties in the
52
estimates of its various component fluxes, the global budget for OCS is out of
53
balance.7,8
54
Isotope analysis is useful tool to trace sources and transformations of trace
55
gases.9,10 To quantify OCS sources and sinks in natural environments using isotope
56
analysis, isotopic fractionation for specific metabolic reactions should be determined in
57
laboratory experiments, in addition to ambient measurements. To date, isotopic
58
fractionations occurring in the reactions of OCS have been determined only for the OCS
59
sink reactions in the stratosphere: OCS photolysis,11–13 as well as its reactions with OH, 3
ACS Paragon Plus Environment
Environmental Science & Technology
60
14
and O(3P).15 There are a few reports for tropospheric reactions. Furthermore, these
61
determinations are based on absorption cross-section measurements, relative rate
62
methods, and theoretical calculations. There is only one report using isotope ratio mass
63
spectrometer (IRMS) measurements, based on an off-line method requiring several
64
µmol samples as well as chemical conversion to SO2 or SF6 for measurement. It is
65
important to precisely determine the sulfur isotopic fractionation for OCS in the
66
troposphere for various processes, including biogeochemical ones. Recently, an online
67
method measuring sulfur isotope ratios in OCS on a gas chromatograph (GC)-IRMS
68
using S+ fragmentation ions was developed,16 enabling us to easily analyze sulfur
69
isotopes in OCS.
70
Soil is thought to be important as both a source and a sink of OCS in the
71
troposphere.7,8,17–20 In particular, soil has been reported as a large environmental sink
72
for atmospheric OCS.7,8,17–20 Bacteria isolated from various soils actively degrade
73
OCS,21,22 with various enzymes, such as carbonic anhydrase,23,24 COSase,25 and
74
CS2hydrolase26 involved in OCS degradation. In actual soil environments, as well as in
75
laboratory experiments, OCS degradation varies with temperature and water content.20
76
This degradation contributes to the vertically decreasing gradient of OCS concentration
77
from upper atmosphere to ground level.27 OCS degradation by bacteria isolated from 4
ACS Paragon Plus Environment
Page 4 of 39
Page 5 of 39
Environmental Science & Technology
78
soil is thought to be related to bacterial degradation that occurs at the soil surface.
79
However, the magnitude of such contribution in terms of a sink for atmospheric OCS is
80
still uncertain. Therefore, it is important to quantitatively evaluate this contribution
81
using OCS sulfur isotope analysis.
82
In this study, we performed incubation experiments using OCS-degrading soil
83
bacteria to determine sulfur isotopic fractionation for OCS during such degradation.
84
This study provides primary experimental evidence for isotopic fractionation via
85
bacterial OCS degradation. The atmospheric implications for the isotopic fractionation
86
for OCS measured in this study also are discussed.
87
88
2. Materials and methods
89
2.1. Strains and medium
90
Seven isolates (THI401, THI402, THI404, THI405, THI410, THI414 and
91
THI415) known to have OCS degradation activity were used in this study. Strains
92
THI401, THI402 and THI404 were isolated from forest soil from Aomori Prefecture,
93
Japan. Strains THI405, THI414 and THI415 were isolated from forest soil from
94
Yamanashi Prefecture, while strain THI410 was isolated from a cattle-farm soil from
95
Tochigi Prefecture.21 Comparative 16S rRNA gene sequence analysis indicated that
5
ACS Paragon Plus Environment
Environmental Science & Technology
96
strains THI401, THI402, THI404 and THI405 were members of the genus
97
Mycobacterium, while strain THI410 belonged to the genus Williamsia, and strains
98
THI414 and THI415 were related to the genus Cupriavidus. These isolates were
99
streaked on a PYG agar slant with pH 7.2, containing (g L-1): 2.0 polypeptone (Nihon
100
Seiyaku, Tokyo, Japan), 1.0 Bacto yeast extract (Difco Laboratories Inc., Detroit, MI,
101
USA), 0.5 glucose, and 15.0 Bacto agar (Difco Laboratories Inc.).
102
All bacterial strains were grown on a slant at 30 ℃. To reduce the effect of
103
hydrolysis of OCS with water,28 all experiments were carried out on the surface of an
104
agar-solidified slant medium rather than in a liquid medium, where we confirmed that
105
growth of bacterial colonies covered the entire slant. A test tube measuring 20 cm in
106
length and 2 cm i.d., containing 10 mL medium to give a headspace volume of 40 mL
107
was used to prepare the slant. Within three days of forming colonies, the cap of the test
108
tube was changed from a silicone sponge cap to a butyl cap to provide a better seal, and
109
the lab air headspace was replaced with N2/O2 (80:20) and 0.03% of CO2.
110
Approximately 4000 parts per million by volume (ppmv) OCS gas (104,000 ppmv with
111
N2 as the balance gas; Taiyo Nippon Sanso, Japan) was added to the batch. For THI401,
112
we also conducted two batches of experiments using approximately 2000 ppmv. OCS
113
gas. In order to test abiotic consumption by slant medium, we prepared the control 6
ACS Paragon Plus Environment
Page 6 of 39
Page 7 of 39
Environmental Science & Technology
114
batches without bacteria for each day of the preparation of slant medium for incubation
115
experiments. Additionally, to observe the biological effects (e.g., cell number) via OCS
116
injection to the batches, we also prepared duplicate bacterial batches for each strain with
117
no added OCS as control experiments.
118
The time of injection of OCS was defined as t = 0 h. To ensure both thorough
119
gas mixing in the headspace and negligible adsorption of gases by the glass, OCS
120
concentration measurements and sample collections for OCS sulfur isotopic
121
measurements were begun at t = 0.33 h. Concentration measurements and isotope
122
measurements of headspace gases were performed on samples collected simultaneously.
123
A 20 µL-sample of headspace gas was sampled using a gas-tight syringe and directly
124
injected into the GC equipped with a flame photometric detector. An additional 1 mL of
125
headspace gas was collected using a gas-tight syringe and transferred into a 5 mL serum
126
bottle filled with ultrahigh-purity He (>99.99995% purity; Taiyo Nippon Sanso, Japan)
127
for later isotopic analysis. The OCS sampling of headspace gases was conducted at five
128
time points for each batch experiment, until ca. 70% of the initial OCS was degraded.
129
On completion of the OCS degradation experiment, the living cell numbers were
130
counted as described below. The OCS degradation experiments were carried out over
131
several days, with schedules shown in Table 1. 7
ACS Paragon Plus Environment
Environmental Science & Technology
132 133
2.2. Carbonyl sulfide mixing ratio measurement
134
OCS concentrations were measured using a GC (GC-14B; Shimadzu, Kyoto,
135
Japan) equipped with a flame photometric detector, and a glass column (Sunpak-S,
136
Shimadzu; 3 mm i.d., and 2.0 m length). N2 gas (>99.999% purity; Ichimura Sanso,
137
Tokyo, Japan) was used as the carrier gas at a flow rate of 100 mL min-1. The
138
temperatures of the injector, the column and the detector were 190 ℃, 60 ℃ and
139
190 ℃ , respectively. The coefficient of variation (standard error relative to mean) was a
140
maximum of 4%, but averaged 2% (n = 3). Reduction in OCS concentration was
141
corrected for by taking into account the amount that was removed by syringe to measure
142
OCS concentration and sulfur isotope ratio.
143
OCS degradation curves were fitted to the exponential function C(t) = C0e–kt,
144
where C(t) is the concentration of OCS at the time t (h), C0 is the initial OCS
145
concentration, and k is the rate constant (per hour per test tube). k values were
146
determined on the basis of fitting a curve to data on OCS degradation with time.
147
8
ACS Paragon Plus Environment
Page 8 of 39
Page 9 of 39
Environmental Science & Technology
148
2.3. Sulfur isotope analysis of carbonyl sulfide
149
Within 14 days of completing the experiment, sulfur isotope compositions of
150
OCS were measured using the online GC-IRMS system described in our previous
151
study.16 Briefly, the system consists of two parts: a pre-concentration line and a
152
GC-IRMS system. The GC was equipped with a capillary column (HP/PLOT Q; Agilent
153
Technologies, CA, U.S.A.; with 0.32 mm i.d., 30 m length, and 10 µm thickness) at
154
60 ℃. He was used as carrier gas with a flow rate of 1.5 mL min−1, while OCS was
155
injected into the IRMS (MAT 253; Thermo Fisher Scientific, Germany) via an open
156
split interface (ConFlo IV; Thermo Fisher Scientific). Although the He was
157
commercially available ultrahigh-purity He (>99.99995% purity; Taiyo Nippon Sanso,
158
Japan), it was further purified using a stainless-steel column having a 7.53 mm i.d., and
159
0.7 m length, packed with 5 A Molecular Sieve (Sigma-Aldrich, Japan) and cooled at
160
−196 ℃ with liquid N2 to avoid any trace contamination by O2 and N2 gases.16
161
OCS was trapped in stainless-steel tubes (10.5 mm i.d., and 150 mm length),
162
and cooled with liquid N2 (−196 ℃), while other species were pumped into the
163
pre-concentration line. OCS was then trapped in a capillary tube covered by a
164
stainless-steel tube containing liquid N2 at −196 ℃ for more than 13 min, before being
165
introduced into the GC-IRMS system. Within the IRMS system, the fragment ions 32S+,
9
ACS Paragon Plus Environment
Environmental Science & Technology
166
33 +
167
used to determine the sulfur isotope ratios in the OCS sample.
S , and
34 +
S produced from electron impact ionization of OCS were measured and
168
Once the acquisition process for IRMS measurements was started (t = 0 s),
169
liquid N2 for the cryofocusing trap was removed to allow OCS injection to the
170
GC-IRMS system. A reference OCS gas was introduced to the system for 20 s intervals
171
at three time points: t = 350 s, 585 s, and 1025 s. The reference gas at t = 350 s was used
172
as the reference for all calculations of OCS sulfur isotopic compositions. The retention
173
time of OCS under these experimental conditions was approximately t = 640 s. From t =
174
400 s to 585 s, the effluent from the GC column was kept off the MS line, using a
175
back-flushed helium flow. This was because we found an unidentified peak at t = 430 s
176
in the samples from the incubation experiments, which is purported to be H2S produced
177
by OCS degradation. To avoid the effect of small sample size in our current study, we
178
only measured samples larger than 8 nmol, with most closer to 15 nmol in volume. To
179
eliminate the influence of the background on each measurement, the column was baked
180
at 200 ℃ for 30 min after each run and we did not start the next run until at least 10 min
181
after baking of the previous run. Some 11 ppmv of OCS samples (Japan Fine Products,
182
Kawasaki, Japan) balanced with He gas were measured between experimental samples
183
to confirm the accuracy and precision of measurements. The typical precision (1σ) of 10
ACS Paragon Plus Environment
Page 10 of 39
Page 11 of 39
Environmental Science & Technology
184
the replicate measurements (n = 3) were 0.42‰, 0.20‰, and 0.32‰ for δ33S, δ34S, and
185
∆33S, respectively. In addition, the raw δ value for each sample with respect to the
186
reference OCS was calibrated using the 11 ppmv of in-house OCS standard gas,
187
previously calibrated against the international sulfur isotopic standard, and measured in
188
independent runs on the same day as sample measurements.
189 190
2.4 Cell numbers
191
The cell numbers of bacteria were estimated based on their fluorescence under
192
microscopic observation, after staining the living cells with Live/Dead reagent
193
(LIVE/DEAD BacLight™ Bacterial Viability Kit for microscopy; Thermo Fisher
194
Scientific). After completion of our OCS degradation experiment, the whole bacterial
195
colony on the slant medium was suspended in 10 mL of 0.85% NaCl. This suspension
196
was centrifuged at 10,000 x g for 15 min, and the supernatant was discarded, while the
197
pellet was re-suspended thoroughly in 0.85% NaCl, using a vortex. This sequence was
198
repeated twice. At this point, 3 µL of Live/Dead reagent was added to 1 mL dilutions of
199
the final suspension. After 15 min, the suspended bacterial cells were filtered onto a
200
polycarbonate black filter, with 25 mm diameter and 0.2 mm pore size (Plain Black
201
Disks;
Advantech
Corp.,
Taiwan),
and
treated
with
11
ACS Paragon Plus Environment
0.01%
poly-L-lysine
Environmental Science & Technology
202
(P8920-100ML: Sigma-Aldrich). Cells on the filter disk were transferred to a slide glass,
203
and the cell number was counted under an epifluorescence microscope (BZ-8000;
204
KEYENCE, Osaka, Japan). This was carried out using green fluorescent protein
205
(GFP-B) excitation, in which living cells show green fluorescence derived from the
206
SYTO9 stain (Thermo Fisher Scientific), as well as with tetramethylrhodamine (TRITC;
207
Thermo Fisher Scientific) excitation in which dead cells show red fluorescence derived
208
from propidium iodide. The living cells were counted in ten microscopic view fields per
209
sample, while dead cells were counted in three microscopic view fields per sample. At
210
the same time, the living cells from batches that were not supplemented with OCS were
211
also counted, using the same procedure to evaluate the effects of adding OCS to our
212
samples. The cell-specific activity was calculated as the ratio of the rate constant to the
213
total number of living cells with a SYTO9 signal. To confirm that the living cell
214
numbers were constant during our experiments, we compared living cell numbers in
215
bacterial batches just after OCS degradation experiments with those without any OCS
216
addition (control experiments).
217 218 219
2.5. Definitions Sulfur isotopic compositions are typically reported using:
12
ACS Paragon Plus Environment
Page 12 of 39
Page 13 of 39
Environmental Science & Technology
δxS = xRsample / xRreference-1
220
(1)
221
where xRsample represents the isotope ratios (xS/32S, where x = 33 or 34) of residual OCS
222
and Rreference represents the initial OCS composition. The isotope compositions of sulfur
223
are often quoted using per mil (‰) notation. In addition to the δ values, capital delta
224
notation (∆33S) is used to distinguish mass-independent fractionation (MIF; or
225
non-mass-dependent fractionation) of sulfur, which causes deviation from the
226
mass-dependent fractionation (MDF) line. The ∆33S value is expressed as: ∆33S = δ33S − [(δ34S + 1)0.515 − 1].
227
228
This notation describes the excess or deficiency of 33S relative to a reference MDF line. The magnitude of isotopic fractionation during a single reaction is expressed
229
230
(2)
using the isotopic fractionation factor α, as follows: x
231
α = xk / 32k,
(3)
232
where xk (x = 33 or 34) and 32k are the reaction rate constants for molecules containing
233
the isotopically heavier and lighter isotopes, respectively. Isotopic fractionation constant
234
x
235
ε (x = 33 or 34) is also defined as: x
ε = (xα − 1).
(4)
236
It is often quoted in ‰ notation. The xε value can be estimated from the relationship
237
between the changes in isotopic ratios and the changes in the substrate concentration 13
ACS Paragon Plus Environment
Environmental Science & Technology
238
Page 14 of 39
(Rayleigh equation),29 as follows: δxS – δxSinitial = xε ln f,
239
(5)
240
where f =[OCS]/[OCS] initial.
241
MIF is often described as the deviation from behavior defined by the
242
mass-dependent fractionation law using an equation. We calculated the deviation
243
from mass-dependent fractionation in 33S (33E), as follows:
244
33
E = 33ε – 0.515 34ε.
(6)
245
246
3. Results and discussion
247
3.1 Carbonyl sulfide degradation by bacteria
248
In batch laboratory experiments, OCS concentrations decreased with time. We
249
found that the degradation rates of OCS in bacterial batches were faster than for control
250
experiments for all experimental days (Figure 1), indicating that OCS was clearly
251
degraded by the soil bacteria. The living and dead cell numbers of the OCS-degrading
252
soil bacteria were not significantly different from numbers of other bacteria
253
with/without OCS addition. This shows that the concentration of OCS was not related to
254
the growth of OCS-degrading bacteria. Neither does OCS damage the cells of
255
OCS-degrading bacteria. The production of H2S during incubation experiments
14
ACS Paragon Plus Environment
Page 15 of 39
Environmental Science & Technology
256
corresponds with the decrease in OCS concentrations in any of the bacterial batches (not
257
quantified). H2S was not observed in control batches. This suggests that the decrease in
258
OCS recorded in this study was solely related to bacterial activity. It is worth discussing
259
the observed abiotic consumption of OCS in the control batches in more detail. If the
260
OCS degradation in bacterial batches occurred not only because of bacterial OCS
261
degradation, but also because of abiotic hydrolysis on slant surfaces and/or a small
262
amount of liquid on the slant, then it is difficult for us to compare bacterial batches
263
performed on different dates (i.e., compare between slants used on different dates).
264
However, the production of H2S during OCS degradation was not observed in all
265
control batches, and this suggests that the decrease in OCS was not related to hydrolysis,
266
because it did not produce H2S. The mechanisms involved in the decrease in OCS are
267
still uncertain, although we surmise it is not related to hydrolysis. It certainly took place
268
on the slant surface. In contrast, in our bacterial batches, the surface of the slant was
269
almost covered by bacterial biomass; thus, such abiotic decreases in OCS did not appear
270
to occur. Consequently, it was not necessary to perform additional treatment to consider
271
the contribution of hydrolysis of the OCS for our bacterial batches.
272
To determine k values, OCS degradation curves were fitted to the exponential
273
function C(t) = C0e–kt, according to Kato et al. 2008.21 The fitted plots showed good 15
ACS Paragon Plus Environment
Environmental Science & Technology
274
correlation (R2 > 0.87). The average k values obtained (h-1) were 0.31 ± 0.05, 0.13 ±
275
0.00, 0.14 ± 0.00, 0.75 ± 0.05, 0.15 ± 0.01, 0.33 ± 0.07 and 0.11 ± 0.03 for strains
276
THI401, THI402, THI404, THI405, THI410, THI414, and THI415, respectively (Table
277
1). The average cell-specific activities (×1010 h-1 cell-1) were 0.22 ± 0.01, 0.69 ± 0.12,
278
0.18 ± 0.02, 1.12 ± 0.28, 0.27 ± 0.03, 0.83 ± 0.29, and 0.07 ± 0.01 for strains THI401,
279
THI402, THI404, THI405, THI410, THI414, and THI415, respectively (Table 1).
280
We classified cell-specific activity with values over 0.5 h-1 cell-1 as fast, values
281
from 0.1 h-1 cell-1 to 0.5 h-1 cell-1 as moderate, and those under 0.1 h-1 cell-1 as slow. Our
282
results showed that strains THI402, THI405, and THI414 were classified into the fast
283
group, strains THI401, THI404, and THI410 were classified into the moderate group,
284
while strain THI415 was classified as slow. Even though strains THI414 and THI415
285
belong to the same genus, strain THI414 had the fastest cell-specific activity, but strain
286
THI415 had the slowest. Strains THI410 and THI415 showed no significant difference
287
between batches. Consequently, for strains THI410 and THI415, we were able to
288
compare the cell-specific activity among different experiments; experiments conducted
289
on different dates showed no significant differences. Kato et al. 200821 showed that the
290
cell-specific activities (×1010 h-1 c.f.u.-1) were 0.76, 20, 1.7, 2.5, 1.9, 0.77, 0.075 for
291
strains THI401, THI402, THI404, THI405, THI410, THI414, and THI415, respectively. 16
ACS Paragon Plus Environment
Page 16 of 39
Page 17 of 39
Environmental Science & Technology
292
21
293
activity. We found slight differences between our current results and those reported by
294
Kato et al. 2008.21 Although the cell-specific activities of strains THI414 and THI415
295
were consistent with the previous study,21 strains THI401, THI402, THI404, THI405,
296
THI410 had slower activities than reported in Kato et al. 2008.21 The reasons for these
297
differences are not clear; however, the initial concentration of OCS in the previous work
298
was lower (30 ppmv) than in this study, and the method used for cell counts was also
299
different. Such differences in cell-specific activity are not important for comparing 34ε
300
values of OCS, as described below.
They found that strain THI402 had the fastest, and strain THI415 had the slowest
301 302
3.2 Sulfur isotopic fractionation of carbonyl sulfide during bacterial degradation
303
The δ34S values increased as bacterial OCS degradation occurred in all
304
bacterial batches (Figure 2). Correlation between δ34S values and Ln f was over 0.89
305
(Table 1). Consequently, bacterial degradation can be treated as a single step reaction.
306
Thus,
307
correlation curves.
308 309
33
ε and 34ε values for each batch could be determined using the slopes of their
The
34
ε values determined for Mycobacterium spp. and Williamsia sp. were
−3.67 ± 0.33‰, −3.99 ± 0.19‰, −3.57 ± 0.22‰, −3.56 ± 0.23‰, −3.74 ± 0.29‰, for
17
ACS Paragon Plus Environment
Environmental Science & Technology
Page 18 of 39
310
strains THI401, THI402, THI404, THI405, and THI410, respectively (Table 1). In
311
contrast, the 34ε values for Cupriavidus spp. were smaller than those for the other genera
312
(Figure 2), yielding −2.09 ± 0.07‰ and −2.38 ± 0.35‰ for strains THI414 and THI415,
313
respectively (Table 1). No significant deviations in 34ε values were observed within the
314
same species, even though experiments for strains THI401, THI410, and THI415 were
315
conducted on different dates. Our results suggest that slant surface and period of
316
pre-incubation had no significant effect on fractionation processes. Clearly, distinct
317
isotopic fractionation constants were observed. The
318
Mycobacterium spp. and Williamsia sp. contrast markedly with the
319
−2.2‰ for Cupriavidus spp. Differences in
320
concentrations of OCS, ranging from 2,000 to 4,000 ppmv, based on our comparison of
321
experimental runs THI 401-1 and -2 (4000 ppmv) and THI 401-3 and -4 (2000 ppmv).
322
Furthermore, the
323
even though different cell-specific activities were observed for Mycobacterium spp. and
324
Cupriavidus spp. (Table 1). Thus, although the numbers of bacterial species examined
325
are limited, our results suggest that
326
genus-level biological differences. Possibly, differences in enzyme and/or membrane
327
functions exist between bacterial strains in this study. The isotope fractionation during
34
34
ε values of ca. −3.7‰ for 34
ε value of ca.
34
ε values did not reflect initial
ε values showed no significant differences within the same genus,
34
ε values for OCS bacterial degradation reflect
18
ACS Paragon Plus Environment
Page 19 of 39
Environmental Science & Technology
328
OCS degradation by bacteria is described by a pathway, in which fractionation varies as
329
a function of OCS movement into or out of the cell, as well as in the reduction step in
330
Rees’s model.30 We provide a schematic diagram showing bacterial OCS degradation in
331
Figure 3. Thus, the overall net isotopic fractionation (εnet) can be expressed as:
332
εnet = εdif + (εenz − εdif) kout / (kout + kenz)
(7)
333
where εm and εe are the isotopic fractionation constants for the membrane and enzyme
334
processes. Rate constants for diffusion into and out of the cell, as well as for enzyme
335
decomposition are given by kin, kout and kenz. At present, it is difficult to identify which
336
process is dominant, i.e., whether kout and/or kenz mostly affect OCS isotopic
337
fractionation. To understand the metabolic processes involved in OCS degradation by
338
bacteria, further experiments using strains with an isolated enzyme25 are required.
339
The determined sulfur isotopic fractionation for bacterial OCS degradation in
340
this study is relatively small rather than other sulfur isotopic fractionations reported for
341
a variety of other bacterial systems. For example, bacterial sulfate reduction generally
342
produces sulfides depleted in
343
with several factors.31–33 Bacterial disproportionation of sulfur intermediates can also
344
produce large sulfur isotope fractionation with depletion in
345
enrichment in
34
34
S by more than 40‰, although the fractionation vary
34
S by 5–7‰ and
S by 17–21‰ for sulfide and sulfate, respectively.34 Sulfur isotopic 19
ACS Paragon Plus Environment
Environmental Science & Technology
Page 20 of 39
346
fractionations during oxidation reactions are limited, because it is difficult to isolate and
347
cultivate the environmentally-relevant sulfur-oxidizing organisms. Previous laboratory
348
experiments with sulfur-oxidizers have shown fractionations in
349
to +5‰, but recent in situ sulfide oxidation showed up to +8‰ fractionation in 34S.35 In
350
contrast to the other bacterial systems, conversion from OCS to H2S does not require the
351
redox change in sulfur. We, therefore, speculate that this might be one of the factors
352
explaining this relatively small fractionation for bacterial OCS degradation.
34
S varying from −6‰
353 354
3.3 The three-isotope plot for carbonyl sulfide during bacterial degradation
355
The results of our isotope measurements are plotted in ln (δ33S + 1) versus ln
356
(δ34S + 1) diagrams (i.e., a three-isotope plot) (Figure 4). The log scale is used here to
357
take into account the power law relationship of MDF. Standard errors are derived from
358
linear regression and depend on residuals of the fits. The slopes ranged from 0.47 to
359
0.61. The ∆33S values estimated from Eq. 2 with their standard error for each bacterial
360
strain were − 0.19 ± 0.24‰, −0.12 ± 0.17‰, −0.10 ± 0.00‰, −0.10 ± 0.03‰, −0.11 ±
361
0.00‰, −0.22 ± 0.06‰, and −0.07 ± 0.06‰ for strains THI401, THI402, THI404,
362
THI405, THI410, THI414, and THI415, respectively (Table 1). These values are
363
equivalent to zero, i.e., they are within the range of measurement error. Our results
20
ACS Paragon Plus Environment
Page 21 of 39
Environmental Science & Technology
364
indicate that bacterial OCS degradation processes are a MDF process.
365
MIF signatures in sulfur isotopes found in polar ice core records of sulfate from
366
SSA show initially positive ∆33S values,36,37 although the change in ∆33S values for
367
these background SSA are not known. This suggests that MIF of sulfur occurred in the
368
stratosphere. Positive ∆33S values also have been observed for tropospheric sulfate,38,39
369
suggesting there are contributions from other atmospheric sources (upper troposphere or
370
lower stratosphere).40 It also has been suggested that MIF of sulfur in the atmosphere is
371
derived from CS2 oxidation,41 SO2 photolysis,42,43 photoexcitation,44,45 and intersystem
372
crossing.43,46,47 In contrast, OCS is not expected to produce MIF during its oxidation in
373
atmospheric sink reactions.13-15,45 In this study, experimental bacterial OCS degradation
374
indicated that bacterial processes also are not responsible for the positive ∆33S values
375
found in polar ice/snow and tropospheric sulfate aerosols.
376 377
3.4 Implications
378
The 34ε values for OCS during degradation by soil bacteria in our experiments
379
ranged from −2.2‰ to −3.7‰. If bacteria isolated from soil degrade OC32S faster than
380
OC34S, then residual OCS should be enriched in 34S. Thus, the δ34S values for OCS on
381
the ground surface should increase with respect to atmospheric OCS, as well as sites
21
ACS Paragon Plus Environment
Environmental Science & Technology
382
where there is no OCS consumption by soil. OCS concentrations observed on the
383
summit of Mt. Fuji, Japan (ca. 720 ppt; 3776 m a.s.l.; 35°21'N, 138°43'E) are higher
384
than at its foothills (ca. 570 ppt;.1300 m a.s.l.; 35°20'N, 138°48'E).27 Diurnal change in
385
OCS concentration at these sites were not detected.27 This lack of diurnal change
386
suggests that OCS uptake by photosynthesis in plants may be negligible at Mt. Fuji.
387
Therefore, we assumed that the differences in OCS concentrations between summit and
388
foothills were related solely to soil bacterial degradation. In this case, the isotopic
389
fractionation constants determined in this study are representative for such soil bacteria,
390
and can be used to model the fractionation of atmospheric OCS at Mt. Fuji. We
391
estimated an enrichment in
392
atmospheric OCS close to the soil surface using Eq. (5). Based on Eq. (5) using
393
concentration of atmospheric OCS of summit and foothills of Mt. Fuji,27 we expect that
394
the δ34S values for atmospheric OCS will show about 0.5‰ to 0.9‰ difference between
395
the summit and foothills of Mt. Fuji. Given the δ34S value of OCS at Kawasaki of 4.9 ±
396
0.3‰, Japan,16 then we surmise a δ34S value of OCS of 5.4‰ to 5.8‰ for the soil
397
surface at the foothill of Mt. Fuji.
34
S of residual OCS in the δ34S value determined from
398
In summary, we determined the isotopic fractionation constants (33ε and 34ε) for
399
OCS undergoing bacterial OCS degradation for the first time. Although the cell-specific 22
ACS Paragon Plus Environment
Page 22 of 39
Page 23 of 39
Environmental Science & Technology
400
activity values were slightly different in strains of the same genus, differences at the
401
generic level were more marked. The
402
(THI401, THI402, THI404 and THI405) and Williamsia sp. (THI410), varied
403
significantly from the ca. −2.2‰ for Cupriavidus spp. (THI414 and THI415). The
404
mechanisms controlling sulfur isotopic fractionation during bacterial OCS degradations
405
are still not known. Thus, the relationship between sulfur isotopic fractionation for both
406
enzymatic and membrane processes should be investigated in future studies to evaluate
407
their
408
chemolithoautotrophic bacterium Thiobacillus thioparus strain THI115 that uses OCS
409
as its sole energy source,48 and in which its OCS-degrading enzyme (COSase) has been
410
purified.25 This would provide a baseline for enzymatic fractionation measurements. In
411
this study, all experiments were conducted with OCS concentrations higher than in the
412
ambient atmosphere, because it is very difficult to conduct low concentration
413
experiments (e.g., they require a high volume). The
414
laboratory study should be further calibrated with field observations. We carried out
415
preliminary estimates for δ34S in soils to evaluate its impact on the atmosphere. We
416
estimated 0.5 to 0.9‰ enrichments occur between summit and foothill sites at Mt. Fuji
417
solely linked to soil bacterial OCS degradation. We conclude that OCS sulfur isotope
respective
contributions.
34
ε values of ca. −3.7‰ for Mycobacterium spp.
This
could
be
better
34
evaluated
using
a
ε values obtained in this
23
ACS Paragon Plus Environment
Environmental Science & Technology
418
analysis provides a new tool to investigate soil OCS sinks in the troposphere. In the
419
future, atmospheric observations of δ34S values for OCS will help refine estimates of
420
soil bacterial activity and its contribution to OCS degradation in the troposphere.
421
422
Acknowledgements
423
We would like to thank S. Ishino for her technical assistance with the experiments and
424
fruitful discussion of the data. We are grateful to members of Yoshida’s laboratory and
425
Katayama’s laboratory for their advice and assistance. This work is supported by a
426
Grant-in-Aid for Scientific Research (S) (23224013) from the Ministry of Education,
427
Culture, Sports, Science and Technology (MEXT), Japan.
428
429
References
430
[1]
431
stratospheric background sulfur aerosol. J. Geophys. Res.; Atmos. 1995, 100, (D5),
432
8993–9005.
433
[2]
434
as a source of stratospheric sulphate aerosol and its impact on climate. Atmos. Chem.
435
Phys. 2012, 12, (3), 1239–1253.
Chin, M.; Davis, D. D., A reanalysis of carbonyl sulfide as a source of
Brühl, C.; Lelieveld, J.; Crutzen, P. J.; Tost, H., The role of carbonyl sulphide
24
ACS Paragon Plus Environment
Page 24 of 39
Page 25 of 39
Environmental Science & Technology
436
[3]
Crutzen, P. J., Possible importance of CSO for sulfate layer of stratosphere.
437
Geophys. Res. Lett. 1976, 3, (2), 73–76.
438
[4]
439
685.
440
[5]
441
effect of the anthropogenic influence on the stratospheric sulfate aerosol layer. Tellus,
442
Ser, B 2004, 56, (3), 294–299.
443
[6]
444
Schofield, D. P.; Robinson, T. W., Photolysis of sulfuric acid vapor by visible light as a
445
source of the polar stratospheric CN layer. J. Geophys. Res.; Atmos. 2005, 110, (D8).
446
[7]
447
disulfide and hydrogen sulfide. Atmos. Environ. 2000, 34, (5), 761–779.
448
[8]
449
budget of atmospheric carbonyl sulfide: Temporal and spatial variations of the dominant
450
sources and sinks. J. Geophys. Res.; Atmos. 2002, 107, (D22).
451
[9]
452
Assonov, S. S., Isotope effects in the chemistry of atmospheric trace compounds. Chem.
453
Rev. 2003, 103, (12), 5125–5161.
Junge, C. E., Formation of stratospheric sulfate layer. Tellus 1966, 18, (2–3),
Myhre, G.; Berglen, T. F.; Myhre, C. E. L.; Isaksen, I. S. A., The radiative
Mills, M. J.; Toon, O. B.; Vaida, V.; Hintze, P. E.; Kjaergaard, H. G.;
Watts, S. F., The mass budgets of carbonyl sulfide, dimethyl sulfide, carbon
Kettle, A. J.; Kuhn, U.; von Hobe, M.; Kesselmeier, J.; Andreae, M. O., Global
Brenninkmeijer, C. A. M.; Janssen, C.; Kaiser, J.; Rockmann, T.; Rhee, T. S.;
25
ACS Paragon Plus Environment
Environmental Science & Technology
454
[10]
Johnson, M. S.; Feilberg, K. L.; von Hessberg, P.; Nielsen, O. J., Isotopic
455
processes in atmospheric chemistry. Chem. Soc. Rev. 2002, 31, (6), 313–323.
456
[11]
457
G.; Toyoda, S.; Ueno, Y.; Yoshida, N., Ultraviolet absorption cross sections of carbonyl
458
sulfide isotopologues OC32S, OC33S, OC34S and O13CS: isotopic fractionation in
459
photolysis and atmospheric implications. Atmos. Chem. Phys. 2011, 11, (19),
460
10293–10303.
461
[12]
462
of carbonyl sulfide. Atmos. Chem. Phys. 2011, 11, (19), 10283–10292.
463
[13]
464
OCS photolytic isotope effects from first principles: sulfur and carbon isotopes,
465
temperature dependence and implications for the stratosphere. Atmos. Chem. Phys. 2013,
466
13, (3), 1511–1520.
467
[14]
468
Yoshida, N., Predictions of the sulfur and carbon kinetic isotope effects in the OH +
469
OCS reaction. Chem. Phys. Lett. 2012, 531, 64–69.
470
[15]
471
Yoshida, N., Isotope Effect in the Carbonyl Sulfide Reaction with O(3P). J. Phys. Chem.
Hattori, S.; Danielache, S. O.; Johnson, M. S.; Schmidt, J. A.; Kjaergaard, H.
Lin, Y.; Sim, M. S.; Ono, S., Multiple-sulfur isotope effects during photolysis
Schmidt, J. A.; Johnson, M. S.; Hattori, S.; Yoshida, N.; Nanbu, S.; Schinke, R.,
Schmidt, J. A.; Johnson, M. S.; Jung, Y.; Danielache, S. O.; Hattori, S.;
Hattori, S.; Schmidt, J. A.; Mahler, D. W.; Danielache, S. O.; Johnson, M. S.;
26
ACS Paragon Plus Environment
Page 26 of 39
Page 27 of 39
Environmental Science & Technology
472
A 2012, 116, (14), 3521–3526.
473
[16]
474
Determination of the Sulfur Isotope Ratio in Carbonyl Sulfide Using Gas
475
Chromatography/Isotope Ratio Mass Spectrometry on Fragment Ions
476
34 +
477
[17]
478
Wild, A.; Kesselmeier, J., Global uptake of carbonyl sulfide (COS) by terrestrial
479
vegetation: Estimates corrected by deposition velocities normalized to the uptake of
480
carbon dioxide (CO2). Biogeosciences 2005, 2, (2), 125–132.
481
[18]
482
carbonyl sulfide in subtropical forests with different successional stages in south China.
483
J. Geophys. Res.; Atmos. 2007, 112, (D8).
484
[19]
485
M.; Seibt, U., Sources and sinks of carbonyl sulfide in an agricultural field in the
486
Southern Great Plains. Proc. Natl. Acad. Sci. U. S. A. 2014, 111, (25), 9064–9069.
487
[20]
488
atmospheric carbonyl sulfide by soil. J. Geophys. Res.; Atmos. 1999, 104, (D9),
489
11577–11584.
Hattori, S.; Toyoda, A.; Toyoda, S.; Ishino, S.; Ueno, Y.; Yoshida, N.,
32 +
S,
33 +
S , and
S . Anal. Chem. 2015, 87, (1), 477–484. Sandoval-Soto, L.; Stanimirov, M.; von Hobe, M.; Schmitt, V.; Valdes, J.;
Yi, Z.; Wang, X.; Sheng, G.; Zhang, D.; Zhou, G.; Fu, J., Soil uptake of
Maseyk, K.; Berry, J. A.; Billesbach, D.; Campbell, J. E.; Torn, M. S.; Zahniser,
Kesselmeier, J.; Teusch, N.; Kuhn, U., Controlling variables for the uptake of
27
ACS Paragon Plus Environment
Environmental Science & Technology
490
[21]
Kato, H.; Saito, M.; Nagahata, Y.; Katayama, Y., Degradation of ambient
491
carbonyl sulfide by Mycobacterium spp. in soil. Microbiology 2008, 154, 249–255.
492
[22]
493
carbonyl sulfide in soils. Microbes Environ. 2002, 17, (1), 32–38.
494
[23]
495
ecological significance of carbonic anhydrase from soil and its microbes from different
496
karst ecosystems of Southwest China. Plant and Soil 2005, 272, (1–2), 133–141.
497
[24]
498
in the toxicity of CO2 and COS but not CS2 toward the flour beetle Tribolium
499
castaneum Coleoptera: Tenebrionidae. Comp. Biochem. Physiol. C: Toxicol. Pharmacol.
500
2005, 140, (1), 139–147.
501
[25]
502
Nakayama, H.; Dohmae, N.; Matsushita, Y.; Odaka, M.; Yohda, M.; Nyunoya, H.;
503
Katayama, Y., Carbonyl sulfide hydrolase from Thiobacillus thioparus strain THI115 is
504
one of the beta-carbonic anhydrase family enzymes. J. Am. Chem. Soc. 2013, 135, (10),
505
3818–3825.
506
[26]
507
Udvarhelyi, A.; Khadem, A. F.; Menzel, A.; Hermans, J.; Shoeman, R. L.; Wessels, H.;
Saito, M.; Honna, T.; Kanagawa, T.; Katayama, Y., Microbial degradation of
Li, W.; Yu, L. J.; Yuan, D. X.; Wu, Y.; Zeng, X. D., A study of the activity and
Haritos, V. S.; Dojchinov, G., Carbonic anhydrase metabolism is a key factor
Ogawa, T.; Noguchi, K.; Saito, M.; Nagahata, Y.; Kato, H.; Ohtaki, A.;
Smeulders, M. J.; Barends, T. R. M.; Pol, A.; Scherer, A.; Zandvoort, M. H.;
28
ACS Paragon Plus Environment
Page 28 of 39
Page 29 of 39
Environmental Science & Technology
508
van den Heuvel, L. P.; Russ, L.; Schlichting, I.; Jetten, M. S. M.; den Camp, H.,
509
Evolution of a new enzyme for carbon disulphide conversion by an acidothermophilic
510
archaeon. Nature 2011, 478, (7369), 412–416.
511
[27]
512
carbonyl sulfide at Mt. Fuji, Japan. Water, Air, & Soil Pollution 2012, 223, (1),
513
159–167.
514
[28]
515
621–640.
516
[29] Mariotti, A.; Germon, J. C.; Hubert, P.; Kaiser, P.; Letolle, R.; Tardieux, A.;
517
Tardieux, P., Experimental Determination of Nitrogen Kinetic Isotope fractionation:
518
Some Principles; Illustration for the Denitrification and Nitrification Processes. Plant
519
Soil 1981, 62, 413− 430.
520
[30]
521
reduction processes. Geochem. Cosmochim. Acta 1973, 37, 1141–1162.
522
[31] Harrison, A. G.; Thode, H. G., Mechanism of the bacterial reduction of sulphate
523
from isotope fractionation studies. Trans. Faraday Soc. 1958, 54, 84–92.
524
[32] Sim, M. S.; Bosak, T.; Ono, S., Large sulfur isotope fractionation does not require
525
disproportionation. Science 2011, 333, 74–77.
Kato, H.; Igarashi, Y.; Dokiya, Y.; Katayama, Y., Vertical distribution of
Ferm, R. J., The Chemistry of Carbonyl Sulfide. Chem. Rev. 1957, 57, (4),
Rees, C., A steady-state model for sulphur isotope fractionation in bacterial
29
ACS Paragon Plus Environment
Environmental Science & Technology
526
[33] Bradley, A. S.; Leavitt, W. D.; Schmidt, M.; Knoll, A. H.; Girguis, P. R.; Johnston,
527
D. T. Patterns of sulfur isotope fractionation during Microbial Sulfate Reduction.
528
Geobiology 2016, 14, (1), 91-101.
529
[34] Canfield D. E.; Thamdrup B., The production of
530
bacterial disproportionation of elemental sulfur. Science 1994, 266, 1973–1975.
531
[35] Zerkle, A. L.; Jones, D. S.; Farquhar, J.; Macalady, J. L. Sulfur isotope values in
532
the sulfidic Frasassi cave system, central Italy: A case study of a chemolithotrophic
533
S-based ecosystem. Geochim. Cosmochim. Acta 2016, 173, 373-386.
534
[36]
535
induced mass-independent sulfur isotope fractionation in stratospheric volcanic sulfate.
536
Geophys. Res. Lett. 2003, 30, (21).
537
[37]
538
sulfur isotopic compositions in stratospheric volcanic eruptions. Science 2007, 315,
539
(5808), 84–87.
540
[38]
541
compositions in present-day sulfate aerosols. J. Geophys. Res.; Atmos. 2003, 108,
542
(D16).
543
[39]
34
S-depleted sulfide during
Savarino, J.; Romero, A.; Cole-Dai, J.; Bekki, S.; Thiemens, M. H., UV
Baroni, M.; Thiemens, M. H.; Delmas, R. J.; Savarino, J., Mass-independent
Romero, A. B.; Thiemens, M. H., Mass-independent sulfur isotopic
Guo, H.; Simpson, I. J.; Ding, A. J.; Wang, T.; Saunders, S. M.; Wang, T. J.; 30
ACS Paragon Plus Environment
Page 30 of 39
Page 31 of 39
Environmental Science & Technology
544
Cheng, H. R.; Barletta, B.; Meinardi, S.; Blake, D. R.; Rowland, F. S., Carbonyl sulfide,
545
dimethyl sulfide and carbon disulfide in the Pearl River Delta of southern China: Impact
546
of anthropogenic and biogenic sources. Atmos. Environ. 2010, 44, (31), 3805–3813.
547
[40]
548
Wang, P., Identification of sources and formation processes of atmospheric sulfate by
549
sulfur isotope and scanning electron microscope measurements. J. Geophys. Res.;
550
Atmos. 2010, 115. (D7)
551
[41]
552
mass independent sulfur isotope fractionations during the photopolymerization of 12CS2
553
and 13CS2. J. Phys. Chem. A 1999, 103, (15), 2477–2480.
554
[42]
555
self-shielding to sulfur mass-independent fractionation during sulfur dioxide photolysis.
556
J. Geophys. Res.; Atmos. 2013, 118, (5), 2444–2454.
557
[43]
558
sulfur mass-independent isotope signatures in stratospehric aerosols. Atmos. Chem.
559
Phys. 2015, 15, (4), 1843–1864.
560
[44]
561
N., Photoabsorption cross-section measurements of 32S, 33S, 34S, and 36S sulfur dioxide
Guo, Z.; Li, Z.; Farquhar, J.; Kaufman, A. J.; Wu, N.; Li, C.; Dickerson, R. R.;
Zmolek, P.; Xu, X. P.; Jackson, T.; Thiemens, M. H.; Trogler, W. C., Large
Ono, S.; Whitehill, A. R.; Lyons, J. R., Contribution of isotopologue
Whitehill, A. R.; Jiang, B.; Guo, H.; Ono, S., SO2 photolysis as a source for
Danielache, S. O.; Hattori, S.; Johnson, M. S.; Ueno, Y.; Nanbu, S.; Yoshida,
31
ACS Paragon Plus Environment
Environmental Science & Technology
562
for the B1B1-X1A1 absorption band. J. Geophys. Res.; Atmos. 2012, 117, (D24)
563
[45]
564
Ueno, Y.; Yoshida, N., SO2 photoexcitation mechanism links mass-independent sulfur
565
isotopic fractionation in cryospheric sulfate to climate impacting volcanism. Proc. Natl.
566
Acad. Sci. U. S. A. 2013, 110, (44), 17656–17661.
567
[46]
568
mass-independent fractionation during photochemistry of sulfur dioxide using
569
broadband light sources. Geochim. Cosmochim. Acta 2012, 94, 238–253.
570
[47]
571
Vibronic origin of sulfur mass-independent isotope effect in photoexcitation of SO2 and
572
the implications to the early earth's atmosphere. Proc. Natl. Acad. Sci. U. S. A. 2013,
573
110, (44), 17697–17702.
574
[48]
575
A thiocyanate hydrolase of Thiobacillus thioparus - A novel enzyme catalyzing the
576
formation of carbonyl sulfide from thiocyanate. J. Biol. Chem. 1992, 267, (13),
577
9170–9175.
Hattori, S.; Schmidt, J. A.; Johnson, M. S.; Danielache, S. O.; Yamada, A.;
Whitehill, A. R.; Ono, S., Excitation band dependence of sulfur isotope
Whitehill, A. R.; Xie, C. J.; Hu, X. X.; Xie, D. Q.; Guo, H.; Ono, S. H.,
Katayama, Y.; Narahara, Y.; Inoue, Y.; Amano, F.; Kanagawa, T.; Kuraishi, H.,
578
32
ACS Paragon Plus Environment
Page 32 of 39
Page 33 of 39
Environmental Science & Technology
579
TOC art
580 581
582
33
ACS Paragon Plus Environment
Environmental Science & Technology
583 584
Figure 1. Time series showing OCS degradation by bacteria grown on a PYG slant (a)
585
Mycobacterium spp., (b) Williamsia sp. and (c) Cupriavidus spp. Control batches are
586
uninoculated sterilized PYG mediums. The concentrations of OCS measured at least
587
five time points per experiment. Experiments were terminated when OCS
588
concentrations were ca. 70% of their initial concentrations.
589 34
ACS Paragon Plus Environment
Page 34 of 39
Page 35 of 39
Environmental Science & Technology
590
591 592
593
Figure 2. Changes in δ34S values relative to initial values as a function of the natural
594
logarithm of the fraction of remaining carbonyl sulfide (ln f). Circles (open, closed and
595
colored) represent strains of Mycobacterium spp., triangles (open, closed, colored)
596
represent strains of Williamsia sp., and squares (open, closed, colored) represent strains
597
of Cupriavidus spp.
598 35
ACS Paragon Plus Environment
Environmental Science & Technology
599 600
601
Figure 3. Carbonyl sulfide (OCS) uptake and reduction in bacterial cells. Schematic
602
diagram showing OCS uptake and H2S production by bacteria. OCS diffuses in (kin),
603
and out (kout) of the membrane, as well as undergoes decomposition by enzymes (kenz).
604
36
ACS Paragon Plus Environment
Page 36 of 39
Page 37 of 39
Environmental Science & Technology
605 606
607
Figure 4. Sulfur isotopic compositions of residual carbonyl sulfide. The dotted line is
608
the mass-dependent fractionation line, with slope (0.515). Circles (open, closed and
609
colored) represent strains of Mycobacterium spp., triangles (open, closed, colored)
610
represent strains of Williamsia sp., and squares (open, closed, colored) represent strains
611
of Cupriavidus spp.
612 37
ACS Paragon Plus Environment
Environmental Science & Technology
613 614 615 616 617
Page 38 of 39
Tables
Table 1. Comparison of cell-specific activity and sulfur isotopic fractionations for carbonyl sulfide degradation between various bacterial strains grown on the PYG slants. Note: ID defines the measurement day for given experiments.
33
Bacteria
Mycobacterium sp.
Williamsia sp.
Cupriavidus sp.
ID
a
Strain
A A Bb B
THI401
A A
THI402
C C
c
THI404
C C
THI405
A Dd D
THI410
e
E E
THI414
Batches
Isotope sampling times
1 2 3f 4f average
6 6 6 5
1 2 average 1 2 average 1 2 average 1 2 3 average 1 2
6 6 6 6 6 6 6 6 N.A. 6 6
Rate constant
Cell number#
Cell-specific activity*
(h-1) 0.28 0.27 0.30 0.39 0.31±0.05
(cell) 1.35 1.18 N.D N.D 1.27±0.12
(h-1 cell-1) 0.21 0.23 N.D N.D 0.22±0.01
0.13 0.12 0.13±0.00 0.14 0.14 0.14±0.00 0.70 0.79 0.75±0.05 0.14 0.14 0.16 0.15±0.01 0.40 0.26
0.23 0.15 0.19±0.05 0.86 0.69 0.77±0.12 0.50 0.94 0.72±0.31 0.44 0.58 0.61 0.54±0.09 0.36 0.48
0.56 0.81 0.69±0.12 0.16 0.20 0.18±0.02 1.39 0.84 1.12±0.28 0.31 0.24 0.27 0.27±0.03 1.12 0.54
38
ACS Paragon Plus Environment
34
ε
‰
−2.01 −2.61 −2.11 −1.60 −2.08±0.36 −1.91 −2.45 −2.18±0.27 −1.83 −2.06 −1.94±0.11 −2.02 −1.85 −1.94±0.09 −2.19 −1.89 N.A.
−2.04±0.15 −1.20 −1.39
33
ε
R2 0.96 0.96 0.85 0.97 0.82 0.97 0.99 0.99 0.93 0.92 0.94 0.94 N.A. 0.97 0.88
‰
−3.74 −4.18 −3.38 −3.39 −3.67±0.33 −3.79 −4.18 −3.99±0.19 −3.35 −3.79 −3.57±0.22 −3.79 −3.33 −3.56±0.23 −4.03 −3.45 N.A.
−3.74±0.29 −2.03 −2.16
Ε
R2 0.98 0.98 0.89 0.97 0.90 0.96 0.98 0.99 0.95 0.98 0.95 0.98 N.A.
‰
−0.08 −0.45 −0.37 0.15 −0.19±0.24 0.04
−0.29 −0.13±0.17 −0.10 −0.10 −0.10±0.00 −0.07 −0.13 −0.10±0.03 −0.11 −0.11 N.A.
−0.11±0.06 0.99 −0.15 0.97 −0.28
Page 39 of 39
618 619 620 621 622 623 624 625
Environmental Science & Technology
average D THI415 1 6 D 2 6 E 3 6 E 4 5 average # (x10-10); *(x1010); N. A. = not available; N. D. = not detected.
0.33±0.07 0.15 0.13 0.07 0.08 0.11±0.03
0.42±0.09 2.26 1.77 1.04 1.39 1.61±0.52
a
0.83±0.29 0.07 0.07 0.07 0.06 0.07±0.01
4-Mar-15, Pre-incubation period was 7 days. 20-Nov-14, Pre-incubation period was 7 days. c 11-Apr-15, Pre-incubation period was 5 days. d 13-Apr-15, Pre-incubation period was 5 days. e 7-Mar-15, Pre-incubation period was 2 days. f Initial OCS concentration was 2000 ppmv, approximately 4000 ppmv in other bacterial batch. b
39
ACS Paragon Plus Environment
−1.29±0.09 −1.02 −1.39 −1.42 −1.36 −1.29±0.16
0.93 0.92 1.00 0.95
−2.09±0.07 −1.80 −2.76 −2.51 −2.45 −2.38±0.35
−0.22±0.06 0.96 −0.09 1.00 1.00 0.99
0.03
−0.13 −0.10 −0.07±0.06