Surprise
New data reveals you can improve vinyl baby pants while you cut costs.
Trimellitates [monomerics made with AMOCO® Trimellitic Anhydride] have always been recognized as outstanding plasticizers for baby pants. They hold up against hot soapy water. And even the heat of automatic dryers. But until now, everyone generally believed trimellitates were too expensive. Not so. And the proof is in this table. Two trimellitates [TOTM—Trioctyl, and NHTM—Tri-n-hexyl] are compared to two typically used commercially available polymeries. [The ingredients and parts of the test formulation are: Vinyl Resin/100; DIDP/25;Test Plasticizer/as indicated; EpoxyTallate Plasticizer/3; Liquid Stabilizer/4; Stearic Acid/0.5.] TOTM
Poly A
40 0.295
34 0.285
40 0.30
40 0.31
Tensile Properties Tensile Strength, psi 100% Modulus, psi % Elongation
2596 1131 362
2395 1138 372
2625 1074 400
2644 1064 412
Compound Cost $/cu. ft. Pound-Volume, $/lb.
12.4274 .1991
12.0808 .1935
12.8560 .2059
12.6092 .2020
Activated Carbon Vol. , 90°c. 24 hours, % wt. loss 48 hours, % wt. loss
1.2 2.2
2.0 2.8
2.5 4.3
2.8 4.2
1 % Soapy Water Ext., 90°c. 24 hours, % wt. loss 48 hours, % wt. loss
2.2 3.3
3.4 5.0
6.9 8.4
7.7 9.2
phr cost*$/lb.
Mineral Oil Ext., 70°c. 24 hours, % wt. loss
Now you see why AMOCO TMA is-becoming the preferred material not only in baby pants, but also in non-fogging automotive interiors, pond liners, wire and cable, and vinyl sheet products of all kinds. So if you're looking for a way to cut costs, consider doing it by improving your plasticizer. Write Amoco Chemicals Corporation, Department 11 643, 130 East Randolph Drive, Chicago, Illinois 60601.
Amoco Chemicals Corporation
AMOCO