Synthesis and Characterization of Quaternized Poly(β-amino ester) for

Aug 13, 2018 - The development of non-viral vectors for gene delivery has gained ... Native Chemical Ligation for Cross-Linking of Flower-Like Micelle...
0 downloads 0 Views 2MB Size
Subscriber access provided by AUSTRALIAN NATIONAL UNIV

Article

Synthesis and characterization of quaternized poly(#-amino ester) for highly efficient delivery of small interfering RNA Yun Liu, Jing Chen, Yue Tang, Shuhan Li, Yushun Dou, and Jiewen Zheng Mol. Pharmaceutics, Just Accepted Manuscript • DOI: 10.1021/acs.molpharmaceut.8b00549 • Publication Date (Web): 13 Aug 2018 Downloaded from http://pubs.acs.org on August 15, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Molecular Pharmaceutics

Synthesis and characterization of quaternized poly(β-amino ester) for highly efficient delivery of small interfering RNA

2 3 4

Yun Liu1, Jing Chen1, Yue Tang†, Shuhan Li, Yushun Dou and Jiewen Zheng Department of Pharmacy, China Pharmaceutical University, Nanjing 211198, PR China Corresponding author: Yue Tang, Tel: +8613851713608. Fax: +862583271355. E-mail address: [email protected]. 1 These authors contributed equally to this work and should be regarded as co-first authors.

5 6

Abstract

7

The development of non-viral vectors for gene delivery has gained attention over the past decades.

8

Specifically, poly(β-amino ester) (PBAE) has shown great potential in improving the delivery of

9

gene therapeutics. It has been observed that low molecular weight PBAE displayed low

10

transfection activities while quaternization could enhance the transgene expression efficacy of

11

PBAE. Herein, PBAE quaternary ammonium salt (PBAEQAS) was synthesized to increase the

12

positive charge of the polymers, which resulted in an increase in siRNA binding efficiency based

13

on self-assembly electrostatic interaction. Specifically, the nanoparticle surface was positively

14

charged, which increased the uptake ability of siRNA. Compared with acrylate-PBAEQAS/siNC

15

nanoparticles

16

nanoparticles and amine-PBAEQAS/siSurvivin nanoparticles induced more efficient cell apoptosis

17

and gene silencing. All these results suggested that PBAEQAS would be a promising gene delivery

18

vector for cancer treatment.

19

Keywords: Poly(β-amino ester); quaternization; nanoparticles; siRNA; transfection

20

1. Introduction

21

and

amine-PBAEQAS/siNC

nanoparticles,

acrylate-PBAEQAS/siSurvivin

Gene therapy is an important part of cancer treatment, and it can be achieved by substitution

ACS Paragon Plus Environment

Molecular Pharmaceutics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

22

of altered genes, inhibition of oncogene or insertion of new genes [1]. A successful gene delivery

23

system promises efficient gene transfection. The carriers for the gene delivery are divided into

24

viral vectors and non-viral vectors. Viral vectors pose high gene transfer efficiency in vivo, but

25

they are more likely to cause immunogenicity because of their strong innate immune response [2],

26

and the viral vectors also have virus-associated toxic side effects [3]. While non-viral vectors have

27

the advantages of reduced cytotoxicity, targeting property and high transfection efficacy [4-6].

28

Non-viral vectors usually refer to liposomes, cationic polymers, peptides and inorganic materials

29

[7-9].

Page 2 of 26

30

In the past decades, a number of polymeric materials have been utilized in formulating gene

31

delivery systems, such as poly(lactic-co-glycolicacid) (PLGA), chitosan, poly(amidoamine)

32

(PAMAM) and poly(L-lysine) (PLL), etc [10-12]. Poly(β-amino esters)(PBAE) are promising

33

materials due to their biodegradable and biocompatible nature. The special chemical structure

34

endows PBAE with availability for further modification [5,13,14]. To date, a library of PBAEs had

35

been synthesized. Among them, some types of PBAE own higher in vitro gene transfection

36

efficiencies than polyethyleneimine (PEI), however, there still exists a part of PBAE owning low

37

transfection ability before modification. Thus, this polymeric material is complicated and pending

38

further study [15-17]. It has been observed that PBAE with high molecular weight were able to

39

mediate effective intracellular gene delivery, but they also showed considerable toxicities [18].

40

While low molecular weight PBAE posed low transfection efficiency, for the low positive charge

41

density of PBAE may reduce its ability to compact siRNA in physiological conditions [19]. When

42

the molecular weight of PBAE is less than 10 kD, it can not effectively condense siRNA [20, 21],

43

but lower molecular weight PBAE reacted more quickly than higher molecular weight PBAE in

44

the case of being able to bind to siRNA [22]. And it had been found that PBAE/siRNA

45

nanoparticles are generally prepared in the acidic buffer solution, the particle size will increase

46

significantly when the nanoparticles were transferred into physiological conditions (pH 7.4) [23].

ACS Paragon Plus Environment

Page 3 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Molecular Pharmaceutics

47 48

Scheme .1. Synthesis of PBAEQAS and the delivery of PBAEQAS/siRNA nanoparticles for cell

49

transfection.

50 51

Recently, most studies focused on various derivatives of polymers to improve the efficiency

52

of gene delivery. For example, It had been found that grafting polyethylene glycol (PEG) in PBAE

53

could enhance the stability of PBAE/DNA complexes [6, 24]. Highly branched PBAE had been

54

deeply studied, and it has been proved that branched PBAE could significantly improve the

55

transfection efficiency[25-28]. Low molecular weight polyethyleneimine-terminated PBAE could

56

improve the gene delivery efficiency than that of the polymer before modification [13]. Moreover,

57

structural modifications, such as changing the quantity and types of amines, have been

58

implemented to enhance the siRNA delivery efficiency [29, 30]. Bhavani Miryala et al. had proved

59

that quaternization of aminoglycoside-derived polymers could enhance the gene delivery

60

efficiency [31]. By quaternary ammonium reaction, the positive charge density of small molecular

61

weight PBAE is increased and the combination efficiency of siRNA is improved at the same time.

62

Therefore, quaternizing the ammine groups of PBAE may be a new way to improve the gene

63

transfection ability of different types of PBAE.

64

The objective of this study was to explore a novel kind of vector based on PBAE with

65

enhanced siRNA delivery capability by increasing the positive charge density through

66

quaternization. Scheme. 1 shown the synthesis of PBAE quaternary ammonium salt (PBAEQAS),

67

the preparation of nanoparticles and the delivery of nanoparticles for cell transfection. Firstly,

68

PBAE was synthesized by a typical Michael addition reaction, and quaternary ammonium reaction

69

was applied to prepare PBAEQAS. Secondly, the siRNA retardation assay was performed and the

70

stability of the formulations were evaluated. Thirdly, the impact of intracellular delivery of such

ACS Paragon Plus Environment

Molecular Pharmaceutics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 26

71

polymers on the cellular uptake and mechanisms, apoptosis and gene silencing of A549 was

72

assessed. We then developed these vectors to deliver survivin siRNA (siSurvivin) to inhibit the

73

expression of survivin genes in cancer cell. And the influence of amine end-modified PBAEQAS

74

and acrylate end-modified PBAEQAS on transfection efficiency was investigated as well.

75

2. Materials and methods

76

2.1. Materials and cell culture

77

1,4-butanediol diacrylate, 4-amino-1-butanol and thiazolylbluetetrazolium bromide (MTT)

78

were purchased from D&B Biological Science and Technology Co.Ltd (Shanghai, China). Agarose

79

was obtained from Solarbio Biotech Co. Ltd. (Beijing, China). JJ Red was purchased from Biolite

80

Biotech Co. Ltd. (Tianjing, China). Ribonuclease A (RNase A), Diethyl pyrocarbonate (DEPC),

81

Chlorpromazine, Genestin and Amiloride were purchased from Aldrich Chemical Co. (Shanghai,

82

China). Filipin III was obtained from Cayman Chemical Co. (Ann Arbor, MI). Fetal bovine serum

83

(FBS, Sijiqing) was purchased from Zhejiang Tianhang Biotechnology Co. Ltd (Hangzhou, China).

84

Trypsin, penicillin, streptomycin, RPMI 1640 cell culture medium, Hoechst 33342 and Trizol total

85

RNA extraction reagent were obtained from KeyGen BioTech (Nanjing, China). LysoTracker Red

86

was purchased from the Beyotime Institute of Biotechnology (Haimen, China). Annexin V-FITC

87

and propidium iodide (PI) apoptosis assays kit was purchased from Xinle Biotech Co. Ltd.

88

(Shanghai, China). The quantitative real time reverse transcription polymerase chain reaction

89

(qRT-PCR) quantitation kit were purchased from GenePharm(Shanghai, China) . The siRNA

90

targeting survivin mRNA (siSurvivin), FAM-labeled siRNA and negative control siRNA (siNC)

91

were synthesized by GenePharm (Shanghai, China). The sequences of siRNA are as follows:

92

siSurvivin:

93

5’-UGUAGAGAUGCGGUGGUCCdTdT-3’.

94

5’-UUCUCCGAACGUGUCACGUTT-3’; antisense: 5’-ACGUGACACGUUCGGAGAATT-3’.

95

All the reagents and chemicals were of analytical grade.

sense:

5’-GGACCACCGCAUCUCUACAdTdT-3’; siNC:

antisense: sense:

96

A549 cells (human lung adenocarcinoma cells) were obtained from American Type Culture

97

Collection (ATCC) and were cultured at 37℃ in 5% CO2 incubator supplemented with complete

ACS Paragon Plus Environment

Page 5 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Molecular Pharmaceutics

98

RPMI 1640 medium (containing 10% FBS, 100 units/ml penicillin and 100µg/ml streptomycin),

99

allowed to attach overnight for subsequent experimentation.

100 101

Scheme. 2. Synthesis of PBAE (A) and PBAEQAS (B).

102 103

2.2. Synthesis of PBAE and PBAE quaternary ammonium salt(PBAEQAS)

104

PBAE were synthesized following a two-step procedure described previously [13, 32, 33].

105

Briefly, 1,4-butanediol diacrylate and 4-amino-1-butanol (at 1:1 molar ratio of amine:diacrylate)

ACS Paragon Plus Environment

Molecular Pharmaceutics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

106

were added into a round-bottom flask and the reaction solution was stirred at 90℃ for 24 h under

107

the protection of nitrogen. To obtain amine end-capping modified PBAE, additional amine

108

monomers were added and the final solution was stirred for another 1 h at room temperature.

109

Tertiary amine groups of PBAE were converted to quaternary ammonium (QA) by reaction with

110

iodomethane (Scheme.2) [34].

Page 6 of 26

111

A certain amount of PBAE solution was dissolved in 10 ml of isopropyl alcohol, and then

112

iodomethane (at 2:1 molar ratio of iodomethane/PBAE) was added dropwise. The reaction mixture

113

was stirred at 60℃ for 16 h. The solution was then removed and the retained solid was washed

114

three times with ethyl alcohol, followed by lyophilization for 24 h. The structures of the

115

synthesized polymers were confirmed by 1H NMR and FT-IR analysis. The 1H NMR was

116

obtained on a Bruker AVANCE 500MHz Spectrometer. All measurements were performed at 300K,

117

using pulse accumulating of 64 scans and the LB parameter of 0.30 Hz. D2O was used as the

118

solvents for dissolving of polymers. The average molecular weight of the polymers were

119

determined by a gel permeation chromatography(GPC, Shimadzu, Japan) equipped with a

120

refractive index detector (RID-10A, SHIMADZU, Tokyo, Japan). The SEC-300 column (300×7.8

121

mm, 5 µm) was eluted with dd H2O at the flow rate of 1 mL/min 40 ℃ . Samples of

122

PEG(polyethylene glycol) with average molecular weights in the range of 3070-21600 Da were

123

used as standards for calibration.

124

2.3. Preparation and characterization of nanoparticles

125

The polyplexes were formulated by mixing PBAEQAS and siRNA at different weight ratios.

126

RNase-free diethyl pyrocarbonate (DEPC)-treated ultrapure water was used as solvent for all

127

solutions of siRNA. Briefly, the PBAEQAS stock solutions in DMSO (100 mg/ml) were diluted

128

with ultrapure water to 1mg/ml. The above-mentioned solution was then mixed with a solution of

129

siRNA (100 ng/µl), vortexed for 10 s and incubated at room temperature for 30 min. Analysis of

130

particle size distribution and zeta potential was performed in a Zetasizer Nano ZS (Malvern

131

Instruments, Malvern, United Kingdom). To assess siRNA retardation, the resulting nanoparticles

132

were characterized by agarose gel electrophoresis. The nanoparticles were added to wells of

ACS Paragon Plus Environment

Page 7 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Molecular Pharmaceutics

133

agarose gel (1%, containing 0.01% JJ Red). The samples were run at 80 V for 30 min, visualized

134

by UV illumination. In order to investigate the stability of the formulation, the nanoparticles (each

135

group contained 50 nM of siRNA respectively) were incubated in presence of 25 mg/ml RNase A

136

at 37℃ [35]. After 20 min the samples were heated in water bath at 80℃ to stop reaction, then the

137

resulting solution were treated with heparin and investigated by agarose gel electrophoresis.

138

2.4. Cytotoxicity assay

139

Cell cytotoxicity assays of A549 cells were performed via the MTT assay. A549 cells were

140

seeded on 96-well plates at 2×104 cells/ml, cultured in complete medium RPMI 1640 for 24 h. The

141

medium was replaced with serum-free RPMI 1640 (200 µl) which containing various levels of

142

nanoparticles. After incubation at 37℃ for 24 h, the medium was changed with MTT solution (180

143

µl serum-free RPMI 1640 and 20 µl MTT (1mg/ml)) and further incubated at 37℃ for 4 h. Finally,

144

the medium was removed and 200 µl DMSO was added and then incubated for 10 min.

145

Absorbance was measured by a Microplate Reader (Multiskan FC, USA) at 490 nm. Cell viability

146

was expressed as a relative percentage compared with untreated cells.

147

2.5. Cellular uptake and mechanisms

148

A549 cells were seeded in 6-well plates at a density of 2×105 cells/ml and incubated for 12

149

h. Then the cells were washed with PBS and incubated with serum-free RPMI 1640 containing

150

nanoparticles for 2 h, 4 h, 6 h, 24 h. Nanoparticles were prepared as described previously. Briefly,

151

FAM labeled siRNA (50nM) was mixed with PBAEQAS (1mg/ml) at a weight ratio of 50:1,

152

vortexed for 10 s and incubated at room temperature for 30 min in the dark. The cells were then

153

washed with PBS for three times, and then the cells were analyzed by flow cytometry

154

(MACSQuant Analyzer 10, Miltenyi, Germany). Furthermore, fluorescence microscopy (Olympus

155

IX53, Japan) was used to qualitatively observe the cells uptake. A549 cells were transfected with

156

the nanoparticles for 6 h, fixed with 4% paraformaldehyde, and stained with Hoechst 33342.

157

The mechanistic studies of FAM-labled siRNA loaded nanoparticles on cellular uptake were

158

performed at 4℃ for 30 min or incubated with various endocytic inhibitors (sodium azide (1

159

mg/ml), chlorpromazine (10 mg/mL), hypertonic sucrose (450 mM), genistein (200 µM), filipin (5

ACS Paragon Plus Environment

Molecular Pharmaceutics 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

160

µg/ml), amiloride (13.3 µg/ml) ) within a period of 30 min at 37℃ prior to the addition of

161

polyplexes and then the cell were incubated with the nanoparticles for 4 h at 37℃ for the uptake

162

mechanistic studies. Cells incubated with nanoparticles in the absence of endocytic inhibitors at

163

37℃ for 4 h were set as control [36,37].

164

2.6. Apoptosis of A549 cells

165

A549 cells were seeded on 6-well plates and cultured overnight. Then the medium was

166

replaced with serum-free RPMI 1640. The nanoparticles were added to each test well. After 6 h

167

incubation at 37℃, the medium was replaced with fresh medium containing 10% FBS, and

168

cultured for another 42 h. The cells were washed twice with PBS and harvested by EDTA-free

169

trypsin, re-suspended with 300 µl binding buffer and 5 µl annexin V-FITC, and incubated at room

170

temperature for 15 min. 5 µl PI was added before the cells were analyzed by flow cytometry

171

instrument. All the operations needed carrying out under protection from light. The cells incubated

172

with PBAEQAS/siNC nanoparticles and the cells incubated with naked siSurvivin were set as the

173

control.

174

2.7. In vitro gene silencing

Page 8 of 26

175

A549 cells were seeded in 6-well plates with 2 ml RPMI 1640 medium containing 10% FBS.

176

After the cells showed 70% to 80% confluence, the culture medium was changed into fresh

177

complete medium containing mocks, siNC-loaded nanoparticles, and siSurvivin-loaded

178

nanoparticles respectively. After 6 h incubation, the medium contained samples were replaced with

179

fresh serum-free medium and further cultured for another 42 h. Then the cells were washed with

180

PBS and lysed by Trizol reagent (KeyGEN BioTECH). The isolated total RNA were quantified by

181

micro UV Spectrophotometer Nano 100 (All for life science, China) at 260 nm. qRT-PCR was

182

performed by using the SYBR Green I dye method according to the manufacturer's instructions.

183

qRT-PCR analysis was performed by using QuantStudio™ 3 Real-Time PCR System, The data

184

were analyzed using the comparative CT(2-△△CT) method [38].

185

2.8. Statistical analysis

186

All experiments were carried out in triplicate as the means±SD. The Student’s t-test was

ACS Paragon Plus Environment

Page 9 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Molecular Pharmaceutics

187

performed to determine the statistical significance of the difference group means at p < 0.005,

188

0.005