Synthesis and Characterization of Stereoregular Ethylene-Vinyl

Banslaben, D. A.; Huynh-Tran, T. C. T.; Blanski, R. L.; Hughes, P. A.; Roberts, W. P.; Grubbs, R. H.; Hatfield, G. R. U.S. Patent 6,203,923, 2001. The...
0 downloads 0 Views 136KB Size
Macromolecules 2005, 38, 9009-9014

9009

Synthesis and Characterization of Stereoregular Ethylene-Vinyl Alcohol Copolymers Made by Ring-Opening Metathesis Polymerization Oren A. Scherman, Ron Walker, and Robert H. Grubbs* Arnold and Mabel Beckman Laboratories for Chemical Synthesis, Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125 Received April 2, 2005; Revised Manuscript Received July 21, 2005 ABSTRACT: The syntheses of regioregular as well as stereoregular ethylene-vinyl alcohol (EVOH) copolymers by ring-opening metathesis polymerization (ROMP) with ruthenium catalysts are reported. Symmetric cyclooctenediol monomers were protected as acetates, carbonates, or acetonides to temporarily increase ring strain as well as impart solubility to the monomer. Polymer molecular weights could be easily controlled by either varying the monomer-to-catalyst ratio or by the addition of a chain transfer agent. Hydrogenation and subsequent deprotection of the ROMP polymers afforded the EVOH materials in high yields, and the structures were confirmed by 1H NMR and 13C NMR spectroscopies. Thermal properties of the corresponding EVOH copolymers are reported and suggest that differences in diol stereochemistry significantly affect the polymer morphology.

Introduction Ethylene-vinyl alcohol (EVOH) copolymers have found commercial utility in food packaging as well as in the biomedical and pharmaceutical industries as a result of their excellent barrier properties toward gases and hydrocarbons.1-6 The structures of EVOH copolymers affect the materials’ ability to limit gas or hydrocarbon diffusion through a membrane.7,8 The current commercial route to these materials involves the free-radical polymerization of vinyl acetate and ethylene monomers followed by saponification.9 As a result of the freeradical polymerization, the overall architecture is impossible to control, and EVOH produced in this fashion contains a degree of branching similar to low-density polyethylene (LDPE).6,10 Furthermore, while the relative amount of vinyl alcohol can be controlled in the feed ratio of the two monomers, exact placement of alcohol functionality along the polymer backbone cannot be controlled.8 This has resulted in a poor understanding of structure-property relationships in EVOH. It has been demonstrated that the incorporation of polar functional groups pendent from a linear polymer backbone can be readily accomplished through ring-opening metathesis polymerization (ROMP) with functional group tolerant late transition metal catalysts.8,9,11-15 Polar, substituted cyclic olefins, such as alcohol-, ketone-, or even halogen-substituted cyclooctenes, undergo ROMP to form absolutely linear polymer bearing pendent functional groups.11,16 The asymmetric monomer, however, prevents absolute control over the placement of the polar group along the polymer backbone. Head-to-head (HH), head-to-tail (HT), and tail-to-tail (TT) couplings are all possible, leading to a regiorandom distribution of functionality.11 This problem has been addressed by two different olefin metathesis polymerization techniques, displayed in Figure 1.8,10,17 Valenti et al. reported the acyclic diene metathesis polymerization (ADMET) of a symmetric alcohol-containing monomer (Figure 1a).10 The molecular weights, however, are restricted to