Synthesis and Structural Variation of Iron, Rhodium, Palladium, and

Synthesis and Structural Variation of Iron, Rhodium, Palladium, and Silver Complexes of a Chiral N-Heterocyclic. Carbene-Phenoxyimine Hybrid Ligand...
2 downloads 0 Views 260KB Size
Organometallics 2008, 27, 281–288

281

Synthesis and Structural Variation of Iron, Rhodium, Palladium, and Silver Complexes of a Chiral N-Heterocyclic Carbene-Phenoxyimine Hybrid Ligand Gavin Dyson, Jean-Cédric Frison, Stevan Simonovic, Adrian C. Whitwood, and Richard E. Douthwaite* Department of Chemistry, UniVersity of York, Heslington, York, U.K., YO10 5DD ReceiVed September 24, 2007

A new class of chiral N-heterocyclic carbene (NHC) precursors has been prepared incorporating a phenoxyimine moiety. Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxyphenyl)meth-(E)ylidene]amino}cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide [C(H)NO(H))][Br] (2a) and Pd(OAc)2 gives the complex [Pd(κ3-CNO)Br] (3), which exhibits tridentate ligand coordination via double deprotonation of 2a. The NHC ligand transfer agents [Ag(κ1-CNO(H))X] (X ) Br (5a), Cl (5b)) are prepared from 2a, chloride analogue 2b, and Ag2O. Reaction between 5b and [Rh(COD)Cl]2 gives the NHC complex [Rh(κ1-CNO(H))Cl] (6) and, on chloride abstraction, the bidentate NHC-imine-coordinated complex [Rh(κ2-CNO(H))][B{3,5-(CF3)2C6H3}4] (7). For complexes 5 and 6 coordination of the phenoxyimine and deprotonation of the phenoxy moiety appear to be modified by intramolecular hydrogen bonding between hydroxyl and imine nitrogen groups. Reaction between 5a and Fe{N(SiMe3)2} gives an unusual bimetallic complex, [Fe(κ2-C(AgBr)NO)2] (8), that exhibits a 1-D polymeric chain motif in the solid state. Preliminary catalytic properties of an acetonitrile adduct of 3, [Pd(κ3-CNO)MeCN][BF4] (4), and 7 are reported for hydroamination and phenylation of enones, respectively, that show good activity but poor enantioselectivity. Introduction The coordination chemistry of N-heterocyclic carbenes (NHC) has been extensively developed since the first reported examples nearly four decades ago.1 Isolation of the first free NHC by Arduengo and co-workers2 led directly to the current resurgence in the synthesis and application of NHC complexes from across the periodic table. The majority of reported complexes contain the later metals, particularly from groups 8–10, principally because of their thermodynamic and kinetic stability and application as ancillary ligands in metal-mediated catalysis.3 NHCs form strong covalent bonds with later metals, but for the more electropositive transition metals NHC ligands are more labile, presumably due to the lack of a sufficient ionic bonding contribution. The lability of an NHC moiety can be reduced by incorporation of hard donor moieties into chelating NHC hybrid ligands, allowing the isolation of new classes of NHC transition * Corresponding author. E-mail: [email protected]. (1) (a) Ofele, K. J. Organomet. Chem. 1968, 12, 42. (b) Wanzlick, H. W.; Schonher, H. Angew. Chem., Int. Ed. 1968, 7, 141. (c) Cardin, D. J.; Çetinkay, B.; Çetinkay, E.; Lappert, M. F.; Randall, E. W.; Rosenberg, E. J. Chem. Soc., Dalton Trans. 1973, 1982. (2) Arduengo, A. J.; Harlow, R. L.; Kline, M. J. Am. Chem. Soc. 1991, 113, 361. (3) (a) Glorius, F. N-heterocyclic Carbenes (NHC) in Transition Metal Catalysis (Topics in Organometallic Chemistry); Springer-Verlag: Berlin, and Heidelberg GmbH & Co. K, 2006. (b) Nolan, S. P. N-Heterocyclic Carbenes in Synthesis; Wiley-VCH, 2006. (c) Kantchev, E. A. B.; O’Brien, C. J.; Organ, M. G. Angew. Chem., Int. Ed. 2007, 46, 2768. (d) Herrmann, W. A.; Schutz, J.; Frey, G. D.; Herdtweck, E. Organometallics 2006, 25, 2437. (e) Frenking, G.; Sola, M.; Vyboishchikov, S. F. J. Organomet. Chem. 2005, 690, 6178. (f) Cesar, V.; Bellemin-Laponnaz, S.; Gade, L. H. Chem. Soc. ReV. 2004, 33, 619. (g) Peris, E.; Crabtree, R. H. Coord. Chem. ReV. 2004, 248, 2239. (h) Herrmann, W. A. Angew. Chem., Int. Ed. 2002, 41, 1291.

metal complex.4 Of particular relevance to the work reported here are NHC hybrids containing aryloxy substituents that have been prepared for polymerization, coupling, metathesis, and allylic substitution reactions4a,g,k,5 and particularly an example of a nickel complex derived from an achiral NHC-phenoxyimine that exhibits activity for styrene polymerization.6 In a previous study we described the synthesis of new chiral imidazolium-imine salts that served as precursors to NHC-imine hybrid ligands for application to palladium-catalyzed enantio(4) (a) Aihara, H.; Matsuo, T.; Kawaguchi, H. Chem. Commun. 2003, 2204. (b) Spencer, L. P.; Winston, S.; Fryzuk, M. D. Organometallics 2004, 23, 3372. (c) McGuinness, D. S.; Gibson, V. C.; Steed, J. W. Organometallics 2004, 23, 6288. (d) Arnold, P. L.; Rodden, M.; Wilson, C. Chem. Commun. 2005, 1743. (e) Liddle, S. T.; Arnold, P. L. Organometallics 2005, 24, 2597. (f) Spencer, L. P.; Fryzuk, M. D. J. Organomet. Chem. 2005, 690, 5788. (g) Pugh, D.; Wright, J. A.; Freeman, S.; Danopoulos, A. A. Dalton Trans. 2006, 775. (h) Downing, S. P.; Danopoulos, A. A. Organometallics 2006, 25, 1337. (i) Watanabe, T.; Matsuo, T.; Kawaguchi, H. Inorg. Chem. 2006, 45, 6580. (j) Jones, N. A.; Liddle, S. T.; Wilson, C.; Arnold, P. L. Organometallics 2007, 26, 755. (k) Edworthy, I. S.; Blake, A. J.; Wilson, C.; Arnold, P. L. Organometallics 2007, 26, 3684. (l) Wang, B. L.; Wang, D.; Cui, D. M.; Gao, W.; Tang, T.; Chen, X. S.; Jing, X. B. Organometallics 2007, 26, 3167. (m) Zhang, D.; Aihara, H.; Watanabe, T.; Matsuo, T.; Kawaguchi, H. J. Organomet. Chem. 2007, 692, 234. (5) (a) Van Veldhuizen, J. J.; Garber, S. B.; Kingsbury, J. S.; Hoveyda, A. H. J. Am. Chem. Soc. 2002, 124, 4954. (b) Larsen, A. O.; Leu, W.; Oberhuber, C. N.; Campbell, J. E.; Hoveyda, A. H. J. Am. Chem. Soc. 2004, 126, 11130. (c) Van Veldhuizen, J. J.; Campbell, J. E.; Giudici, R. E.; Hoveyda, A. H. J. Am. Chem. Soc. 2005, 127, 6877. (d) Zhang, D.; Kawaguchi, H. Organometallics 2006, 25, 5506. (e) Li, W. F.; Sun, H. M.; Wang, Z. G.; Chen, M. Z.; Shen, Q.; Zhang, Y. J. Organomet. Chem. 2005, 690, 6227. (f) Yagyu, T.; Oya, S.; Maeda, M.; Jitsukawa, K. Chem. Lett. 2006, 35, 154. (g) Chen, M. Z.; Sun, H. M.; Li, W. F.; Wang, Z. G.; Shen, Q.; Zhang, Y. J. Organomet. Chem. 2006, 691, 2489. (6) Li, W. F.; Sun, H. M.; Chen, M. Z.; Wang, Z. G.; Hu, D. M.; Shen, Q.; Zhang, Y. Organometallics 2005, 24, 5925.

10.1021/om7009478 CCC: $40.75  2008 American Chemical Society Publication on Web 01/01/2008

282 Organometallics, Vol. 27, No. 2, 2008

Figure 1. A palladium complex incorporating a chiral NHC-imine ligand.

Figure 2. Salen ligand example.

selective allylic substitution.7 Palladium complexes (Figure 1) were prepared from analogous silver(I) precursors using established methodology8 that circumvents the need to prepare a free NHC ligand. In subsequent work we have attempted to synthesize other metal complexes of these ligands using silver(I) NHC transfer agents and via typical deprotonation routes that generate NHC molecules in situ. However, success has largely been limited by the apparent instability of free NHC derivatives. In our earlier work,7,9 examples were restricted to imines containing hydrocarbyl substitutents, and we envisaged that incorporation of an additional donor atom would potentially provide access to new classes of catalyst. One type of imine moiety that has been extensively applied to metal coordination chemistry and catalytic applications is Schiff bases derived from phenolimines, most notably the Salen class of ligands (Figure 2) for enantioselective chemistry.10 Here we report the synthesis of a new chiral imidazolium-phenolimine salt and related coordination chemistry giving complexes of iron, palladium, rhodium, and silver. Preliminary catalytic data are also reported.

Results and Discussion Access to NHC-imine ligand precursors is achieved from condensation reactions between the imidazolium-amine salt 3-((1R,2R)-2-aminocyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) (Scheme 1) and aldehydes or ketones.7 Using similar methodology, reaction between 1a or the chloride analogue (1b) and 3,5-di-tert-butyl-2-hydroxybenzaldehyde gives the imidazolium-phenolimine compounds 3-((1R,2R)-2{[1-(3,5-di-tert-butyl-2-hydroxyphenyl)meth-(E)ylidene]amino}cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol1-ium halide, [C(H)NO(H)][X] (X ) Br (2a), Cl (2b)) in high yield (Scheme 1). The chloride 2a was prepared to circumvent potential halide exchange and subsequent separation problems in reactions involving metal chlorides. Compounds 2a and 2b (7) Bonnet, L. G.; Douthwaite, R. E.; Kariuki, B. M. Organometallics 2003, 22, 4187. (8) Wang, H. M. J.; Lin, I. J. B. Organometallics 1998, 17, 972. (9) Bonnet, L. G.; Douthwaite, R. E.; Hodgson, R.; Houghton, J.; Kariuki, B. M.; Simonovic, S. Dalton Trans. 2004, 3528. (10) (a) Kolb, H. C.; Vannieuwenhze, M. S.; Sharpless, K. B. Chem. ReV. 1994, 94, 2483. (b) Jacobsen, E. N. Acc. Chem. Res. 2000, 33, 421. (c) Schaus, S. E.; Brandes, B. D.; Larrow, J. F.; Tokunaga, M.; Hansen, K. B.; Gould, A. E.; Furrow, M. E.; Jacobsen, E. N. J. Am. Chem. Soc. 2002, 124, 1307. (d) Katsuki, T. AdV. Synth. Catal. 2002, 344, 131. (e) Katsuki, T. Synlett 2003, 281. (f) Holbach, M.; Weck, M. J. Org. Chem. 2006, 71, 1825. (g) Baleizao, C.; Garcia, H. Chem. ReV. 2006, 106, 3987.

Dyson et al.

are hygroscopic powders that are soluble in water and most organic solvents including alcohols, ethers, and aromatic and chlorinated compounds, and the NMR spectroscopic data of 2a and 2b are indistinguishable. 1H NMR spectroscopy clearly shows characteristic signals at δ 8.38, 11.22, and 12.86 corresponding to CHimine, imidazolium NC(H)N, and OH protons, respectively, and corresponding signals are observed at δ 135.4, 157.2, and 166.9 for NC(H)N, COH, and imineCH in the 13C NMR spectrum. It should be noted that, in comparison to other phenols, the significant downfield shift of the phenolic OH proton is due to hydrogen-bonding interaction between the OH and imine nitrogen moieties (Scheme 1).11 There are a number of potential routes to NHC metal complexes derived from an imidazolium salt including deprotonation to give a free NHC for coordination, direct reaction with a metal precursor containing a coligand capable of deprotonation, and the use of a metal NHC complex as a transfer agent. With respect to compound 2, deprotonation of imidazolium and phenol moieties is potentially required, and attempts to prepare an NHC-phenoxyimine from reaction between 2 and 2 equiv of a base were not successful. However, use of suitable metal precursors did allow isolation of several new NHC metal complexes exhibiting a variety of coordination modes. Direct metalation of 2a occurs from reaction between 2 and Pd(OAc)2 to give the complex [Pd(κ3-CNO)Br] (3) (Scheme 1) as an air-stable orange solid. NMR spectroscopy shows several significant changes in comparison to compound 2a that are indicative of κ3-ligand coordination. In the 1H NMR spectrum the chemical shift of the cyclohexyl proton adjacent to the imine nitrogen atom (c-hexCHimine) is observed significantly upfield at δ 2.53, whereas the chemical shift of c-hexCHNHC is relatively unchanged at δ 4.65. Other significant features are shifts of signals attributable to the isopropyl substituent, where the CH(CH3)2 signal is observed at δ 6.15 (4.87 for 2a) and two doublets of CH(CH3)2 are separated by a greater chemical shift difference (δ 1.52 and 1.54 for 2a and δ 0.82 and 1.28 for 3). The absence of imidazolium NC(H)N and OH signals also suggests κ3-coordination. Comparison of 13C NMR spectra of 2a and 3 indicates that as expected the CO signal is sensitive to O coordination, being observed at δ 166.0 for 3, exhibiting a characteristic downfield shift (vide infra). However, there is no corresponding obvious trend in the chemical shift of the imine CH carbon indicative of imine coordination. A signal for the PdC carbene carbon atom is observed at δ 156.3. The coordination motif was confirmed by a single-crystal X-ray diffraction study, and the molecular structure is shown in Figure 3. Crystallographic and select distance and angle data are given in Tables 1 and 2 respectively. Two molecules are present in the asymmetric unit, which differ essentially only in the orientation of the tBu substituents. The geometry about the palladium atom is square-planar comprising trans CNHC-OH and Nimine-Br moieties (C(1)-Pd(1)-O(1) ) 173.4(2)° and N(3)-Pd(1)-Br(1) ) 173.43(17)°), respectively. Bond lengths and angles are not considered exceptional with, for example, Pd(1)-C(1) ) 1.952(6) Å and Pd(1)-N(3) ) 1.993(6) Å, similar to related PdCl2(NHC-imine) derivatives and with the Pd(1)-O(1) ) 2.034(5) Å distance similar to known palla(11) (a) Dudek, G. O. J. Am. Chem. Soc. 1963, 85, 694. (b) Dudek, G. O. J. Org. Chem. 1965, 30, 548.

Chiral N-Heterocyclic Carbene-Phenoxyimine Hybrid Ligand

Organometallics, Vol. 27, No. 2, 2008 283

Scheme 1. Synthetic Routes to Compounds and Complexes 2-8a

a Reaction conditions: (i) 3,5-di-tert-butyl-2-hydroxybenzaldehyde, 12 h, EtOH, 80 °C; (ii) 2a, Pd(OAc)2, THF, 12 h, 75 °C; (iii) AgBF4, MeCN, 1 h, 20 °C; (iv) Ag2O, CH2Cl2, 12–24 h, 20 °C; (v) 6b, 0.5 [Rh(COD)Cl]2, CH2Cl2, 1 h, 20 °C; (vi) Na[B{3,5-(CF3)2C6H3}4], CH2Cl2, 15 min, 20 °C; (vii) 5a, 0.5 Fe{N(SiMe3)2}2, THF, 12 h, -78 to 20 °C.

Figure 3. Molecular structure of complex 3. Probability displacement ellipsoids are set at 50%. Hydrogen atoms have been omitted for clarity.

dium(II) Schiff base complexes.12 The two six-atom palladacycles exhibit boat-like confirmations that are staggered with respect to each other. Addition of AgBF4 to an acetonitrile solution of complex 3 gives the cationic acetonitrile derivative [Pd(κ3-CNO)MeCN] [BF4] (4), which we envisaged would aid substrate binding via displacement of the acetonitrile ligand. NMR spectroscopy shows similar features to 3, with the more significant shifts observed for c-hexCHimine and CH(CH3)2 at δ 3.75 and 5.14, respectively, and PdC at δ 149.5. Additional signals attributable to coordinated acetonitrile are observed at δ 1.91 in the 1H NMR spectrum and 13C NMR signals at δ 2.1 and 123.9, respectively. Unfortunately a single crystal could not be grown, but elemental analysis was consistent with the proposed formulation. Attempts to affect double deprotonation of 2 using other M(OAc)2 (M ) Mn, Co) precursors did not give analogous (12) (a) Bindlish, J. M.; Bhatia, S. C.; Gautam, P.; Jain, P. C. Indian J. Chem., Sect. A: Inorg., Bio-Inorg., Phys., Theor. Anal. Chem. 1978, 16, 279. (b) Ghedini, M.; Pellegrino, C.; Armentano, S.; Demunno, G.; Bruno, G. Inorg. Chim. Acta 1986, 122, 193. (c) Voutsas, G. P.; Keramidas, K. G.; LaliaKantouri, M. Polyhedron 1996, 15, 147. (d) Lai, Y. C.; Chen, H. Y.; Hung, W. C.; Lin, C. C.; Hong, F. E. Tetrahedron 2005, 61, 9484. (e) Naota, T.; Koori, H. J. Am. Chem. Soc. 2005, 127, 9324.

[M(κ3-CNO)Br] products. Paramagnetism prevented any detailed NMR analysis, but ESI mass spectrometry showed two significant signals in a ca. 60:40 ratio corresponding to the cation of 2 and a m/z ratio suggestive of [M(κ2-C(H)NO)2][Br]2, respectively, where it is presumed that coordination to the metal atom is via the phenoxyimine moiety. In related reactions between M{N(SiMe3)2}2 (M ) Mn, Fe, Co) and 1 equiv of 2 similar results were obtained. An alternative strategy was therefore investigated via transmetalation of a silver(I) NHC complex. The advantage of silver(I) NHC complexes include simple preparation directly from an imidazolium salt,8,13 ease of handling due to air stability, and additionally interesting properties are exhibited in their own right including antibacterial activity.14 Reaction between 2 equiv of 2a or 2b and Ag2O in dichloromethane gave the air-stable complexes [Ag(κ1-CNO(H))X] (X ) Br (5a), Cl (5b)) (Scheme 1) in high yield. Only minor differences in the data of 5a and 5b are observed, and therefore discussion will be limited to 5a. NMR spectroscopy is consistent with the proposed formulation and shows signals attributable to a CHimine and phenol OH protons at δ 8.14 and 13.01, respectively, which are comparable to compound 2a and are indicative of no significant interaction between the phenol-imine moiety and the silver atom. Further spectroscopic corroboration is provided by signals at δ 157.1 and 166.0 attributed to COH and imineCH, respectively, in the 13 C NMR spectrum, which are also similar to 2a and in contrast to 3 and 4. The carbene atom AgC could not be observed, which is not unusual for this class of complexes. Structurally related silver(I) NHC-imine complexes do not exhibit a silver-imine interaction.7 However, the formulation of 5 is in contrast to known complexes that incorporate an aryl (phenyl or naphthyl) alcohol moiety that exhibit a silver(I) NHC-aryloxy composition as a net result of spontaneous HBr elimination.5a-c No elimination of HX for 5a or 5b was observed at room temperature, and heating did not give silver(I) NHC phenoxyimine complexes, as judged by 1H NMR spectroscopy. Presum(13) Garrison, J. C.; Youngs, W. J. Chem. ReV. 2005, 105, 3978. (14) Kascatan-Nebioglu, A.; Panzner, M. J.; Tessier, C. A.; Cannon, C. L.; Youngs, W. J. Coord. Chem. ReV. 2007, 251, 884.

284 Organometallics, Vol. 27, No. 2, 2008

Dyson et al.

Table 1. Crystallographic Data for Complexes [Pd(K3-CNO)Br] (3), [Rh(K1-CNO(H))Cl] (6), and [Fe(K2-C(AgBr)NO)2] (8) formula formula wt temp, K wavelength, Å cryst size, mm cryst syst space group a, Å b, Å c, Å V, Å3 Z dcalcd, g cm-1 µ, mm-1 F(000) θ range (deg) no. reflns measd no. indep reflns no. reflns with I g 2σ(I) no. params abs corr transmn coeff range R(F) (I g 2σ(I))a Rw(F2) (all data)b GOF(F2) absol strct param ∆F (max./min.), e Å-3 a

3

6

8

C84H106Br2N6O3Pd2 1620.37 100(2) 0.71073 0.15 × 0.15 × 0.10 orthorhombic P212121 14.5583(8) 20.1309(11) 26.9433(15) 7896.3(8) 4 1.363 1.518 3352 1.59 to 25.09 84 948 13 987 13 014 890 semiempirical 0.805–0.860 0.0511 0.1323 1.027 0.021(9) 3.176/-1.620

C41H57ClN3ORh 746.26 110(2) 0.71073 0.23 × 0.05 × 0.02 orthorhombic P212121 12.786(3) 16.419(3) 18.434(4) 3870.1(13) 4 1.281 0.544 1576 1.66 to 25.09 40 982 6857 6008 452 semiempirical 0.816–0.990 0.0342 0.0689 1.016 0.00(2) 0.589/-0.487

C73H96Ag2Br2FeN6O2 1520.97 110(2) 0.71073 0.15 × 0.05 × 0.05 orthorhombic P212121 16.8959(14) 18.3946(16) 23.265(2) 7230.7(11) 4 1.397 1.886 3128 1.49 to 20.21 46 262 6874 5827 792 semiempirical 0.830–0.910 0.0418 0.0940 1.056 0.048(13) 0.617/-0.432

R(F) ) ∑4Fo| - |Fc4/∑4Fo|. b Rw(F2) ) {∑[w(Fo2 - Fc2)2]/∑[w(Fo2)2]}1/2. Table 2. Selected Bond Distances (Å) and Angles (deg) for [Pd(K3-CNO)Br] (3) Distances

Pd(1)-Br(1) Pd(1)-C(1) Pd(1)-N(3) Pd(1)-O(1)

2.4341(10) 1.952(6) 1.993(6) 2.034(5)

C(1)-N(1) C(1)-N(2) C(10)-N3 C(16)-O(1)

C(1)-Pd(1)-N(3) O(1)-Pd(1)-Br(1) C(1)-Pd(1)-Br(1) N(3)-Pd(1)-O(1)

Angles 87.2(3) C(1)-Pd(1)-O(1) 87.37(18) N(3)-Pd(1)-Br(1) 94.53(17) N(1)-C(1)-N(2) 91.6(3) C(9)-N(3)-C(10)

1.347(8) 1.361(8) 1.286(9) 1.294(9) 173.4(2) 173.43(17) 105.4(5) 119.8(6)

ably deprotonation is hindered due to intramolecular hydrogen bonding between phenol OH and imine N atoms. Complex 5b does indeed act as a ligand transfer agent to late metals including rhodium, as exemplified by reaction between 2 equiv of 5 and [Rh(COD)Cl]2 (where COD ) 1,4cyclooctadiene) to give [Rh(κ1-CNO(H))Cl] (6) (Scheme 1). NMR spectroscopy shows similar features to 5 indicative of ligand binding at the NHC carbon atom. A Rh-NHC bond is clearly shown by a doublet signal at δ 183.3 (1JRh-C ) 52 Hz) in the 13C NMR spectrum for the carbene carbon atom, and similarly to 5, signals attributable to COH and imineCH are observed at δ 158.6 and 168.7 indicative of κ1-ligand coordination. The 1H NMR clearly shows signals at δ 9.25 and 13.95 for the CHimine and OH protons, respectively. Single crystals of 6 could be grown from benzene that were suitable for an X-ray diffraction study, and the molecular structure is shown in Figure 4. Crystallographic data and select distance and angle data are given in Tables 1 and 3, respectively. Coordination of the chiral ligand is confirmed as κ1, and it is clear that there is no direct intra- or intermolecular interaction between the phenoxyimine moiety and a rhodium atom. The geometry at the rhodium atom is essentially square planar if COD is considered a bidentate ligand. A difference map revealed the phenolic OH hydrogen atom H(1) that is incorporated into a plane comprising N(3)-C(10–12)-O(1)-H(1) with distances O(1)-H(1) and N(3)-H(1) of 0.87(4) and 1.80(4) Å, respectively. Attempts to

Figure 4. Molecular structure of complex 6. Probability displacement ellipsoids are set at 50%. Hydrogen atoms have been omitted for clarity. Table 3. Selected Bond Distances (Å) and Angles (deg) for [Rh(K1-CNO(H))Cl] (6) Distances Rh(1)-C(1) Cl(1)-Rh(1) Rh(1)-C(34) Rh(1)-C(35) Rh(1)-C(38) Rh(1)-C(39)

2.048(3) 2.3797(9) 2.095(4) 2.124(4) 2.202(3) 2.219(4)

C(1)-N(1) C(1)-N(2) C(10)-N(3) C(12)-O(1) O(1)-H(1) N(3)-H(1)

C(1)-Rh(1)-Cl(1) C(34)-Rh(1)-C(39) C(35)-Rh(1)-C(38) N(1)-C(1)-N(2)

Angles 92.21(9) C(12)-O(1)-H(1) 81.01(16) O(1)-H(1)-N(3) 81.97(15) C(10)-N(3)-H(1) 111.5(3)

1.356(5) 1.374(4) 1.279(4) 1.346(4) 0.87(4) 1.80(4) 106(3) 153(4) 96(4)

deprotonate the phenol with bases such as NaOH, NEt3, and KOtBu or to thermally eliminate HCl unfortunately did not give a single major product, as judged by 1H NMR spectroscopy. Chloride abstraction could be achieved from reaction between 6 and Na[B{3,5-(CF3)2C6H3}4] in dichloromethane to give [Rh(κ2-CNO(H))][B{3,5-(CF3)2C6H3}4] (7). Unfortunately, single

Chiral N-Heterocyclic Carbene-Phenoxyimine Hybrid Ligand

Organometallics, Vol. 27, No. 2, 2008 285 Table 4. Selected Bond Distances (Å) and Angles (deg) for [Fe(K2-C(AgBr)NO)2] (8)a Distances Ag(1)-C(1) Ag(1)-Br(1) Br(1)-Ag(2)* Fe(1)-O(1) Fe(1)-O(2) Fe(1)-N(3) Fe(1)-N(6)

2.111(9) 2.4736(14) 3.241(2) 1.912(6) 1.896(6) 2.062(7) 2.081(7)

C(1)-Ag(1)-Br(1) Ag(1)-Br(1)-Ag(2)* Br(1)-Ag(1)-Br(2)* N(1)-C(1)-N(2) O(1)-Fe(1)N(3) O(2)-Fe(1)-N(6)

162.5(2) 81.4(3) 97.6(3) 103.7(8) 90.6(3) 90.8(3)

Ag(2)-C(34) Ag(2)-Br(2) Br(2)-Ag(1)* C(10)-N(3) C(43)-N(6) C(16)-O(1) C(49)-O(2)

Angles C(34)-Ag(2)-Br(2) Ag(2)-Br(2)-Ag(1)* Br(2)-Ag(2)-Br(1)* N(4)-C(34)-N(5) O(1)-Fe(1)-O(2) N(3)-Fe(1)-N(6)

2.099(9) 2.4399(13) 3.090(2) 1.295(11) 1.301(10) 1.317(10) 1.319(10) 171.3(3) 85.2(3) 94.5(3) 105.5(7) 128.0(3) 110.4(3)

a Asterisk denotes atoms at symmetry positions (1 - x, 0.5 + y, 0.5 - z).

Figure 5. Molecular structure of complex 8. Probability displacement ellipsoids are set at 50%. Hydrogen atoms have been omitted for clarity.

crystals of sufficient quality have not been obtained, but other characterization is consistent with the proposed formulation. Elemental analysis is consistent with the composition, and NMR spectroscopy indicates that, in contrast to 6, complex 7 exhibits κ2-CNO(H) coordination where NHC and imine moieties are coordinated to the metal atom. Perhaps the most compelling piece of evidence for imine coordination is provided by the 1H NMR signal attributable to the phenol OH atom at δ 6.57 that is typical of phenols in nonprotic media where hydrogen bonding or strong noncovalent interactions are absent. Consistent with complexes 2–6, the 13C NMR signal for the COH atom at δ 155.8 indicates no metal–oxygen bond and a doublet (1JRh-C ) 51 Hz) at 174.9 ppm is observed for the carbene carbon. Attempts were also made to use complexes 5a and 5b as an NHC ligand transfer agent to earlier metals by precoordination of the phenoxyimine moiety in the hope that silver halide precipitation would drive NHC-metal bond formation. For example reaction between FeBr2 and 5a did not give a tractable product. Furthermore, Fe{N(SiMe3)2}2 and 1 equiv of 5a did not give Fe(κ3-CNO)N(SiMe3)2 but the deep red complex [Fe(κ2C(AgBr)NO)2] (8) resulting from reaction between the metal precursor and two ligand equivalents, representing an example of a multimetallic complex based on an NHC ligand. Several modifications to the experimental procedure including order and rate of addition, dilution, temperature, and attempted conproportionation did not give the target complex. Paramagnetism precluded analysis by NMR spectroscopy, but single crystals of 8 suitable for an X-ray diffraction study were obtained and the molecular structure is shown in Figure 5. Crystallographic and select distance and angle data are given in Tables 1 and 4, respectively. The geometry at the iron atom is pseudotetrahedral, comprising two, essentially planar, C3NFeO metallocycles subtending an angle of 85° at the common iron atom. In comparison to known related structures15 containing only (15) (a) Torzilli, M. A.; Colquhoun, S.; Kim, J.; Beer, R. H. Polyhedron 2002, 21, 705. (b) Bao, X.; Wang, F. W.; Wei, Y. J. Acta Crystallogr., Sect. E: Struct. Rep. Online 2006, 62, M1298.

Figure 6. Chain structure of complex 8. Atoms marked with a (′) and (*) are at symmetry positions (1 - x, -0.5 + y, 0.5 - z) and (1 - x, 0.5 + y, 0.5 - z), respectively.

phenoxyimines in the primary coordination sphere the Fe-O and Fe-N bond lengths are slightly longer and O-Fe-N angles more acute presumably due to noncovalent interactions. A pseudolinear geometry at the silver atoms is observed and the C-Ag-Br vectors are approximately parallel. Figure 6 shows resulting intermolecular interactions between adjacent molecules, resulting in a 1-D polymeric structure connected via an Ag2Br2 parallelogram motif where two distinct bond distances allow identification of intra- and intermolecular Ag-Br bonds. Related dimeric structures have been reported for NHC complexes,9,16 which exhibit similar Ag-Br bond distances; however the intermolecular distance Ag(1)-Br(2) ) 3.241(2) Å for 8 is at the long extreme of the range. In preliminary experiments complex 4 has been examined as a precatalyst for hydroamination and 7 for conjugate addition of phenylboronic acids to enones. Reaction between piperidine and methacrylonitrile at 40 °C using 2 mol % 4 gave 3-(piperidin-1-yl)butanenitrile in 90% yield after 24 h; however no enantioselectivity was observed. The activity is similar to that reported for tridentate P-NHC-P complexes, which do show moderate enantioselectivity for this reaction.17 Complex 7 is a precatalyst for the addition of phenyl moieties to enones as shown in Table 5. The use of related NHC imidazolidenes has previously been described including mono(16) (a) Tulloch, A. A. D.; Danopoulos, A. A.; Winston, S.; Kleinhenz, S.; Eastham, G. J. Chem. Soc., Dalton Trans. 2000, 4499. (b) Lee, C. K.; Lee, K. M.; Lin, I. J. B. Organometallics 2002, 21, 10. (17) (a) Gischig, S.; Togni, A. Organometallics 2004, 23, 2479. (b) Gischig, S.; Togni, A. Eur. J. Inorg. Chem. 2005, 4745.

286 Organometallics, Vol. 27, No. 2, 2008 Table 5. Conjugate Addition of Phenylboronic Acids to Enones Using 7 as Precatalyst

b

a Conditions: dioxane/H2O, 3 mol % 7, 2 Et3N, reflux, 3 h. Determined by 1H NMR. c Boronic acid coupling product formed.

NHC derived from cyclophanes and a chelating NHC-phosphine, both of which can lead to excellent enantioselectivities for cyclic and acyclic precursors.18 Unfortunately complex 7 does not give good enantioselectivites; however complex 7 is an active catalyst and some chemoselectivity is observed with respect to the boronic acid and enone precursors. Addition to cyclopentenone and cyclohexenone using phenyl and 4-methoxyphenyl boronic acid (entries 1–4) gave very high yields, whereas the use of the 4-chlorophenyl derivative gave exclusively biaryl products presumably resulting from Suzuki-type coupling (entries 5 and 6). Selectivity was also observed between (E)-4-methoxybut3-en-2-one and (E)-non-3-en-2-one (entries 7 and 8), where the presence of an electron-donating methoxy group prevents reaction.

Conclusions Variable coordination is observed for an imidazoliumphenoxyimine ligand precursor exhibiting κ3-CNO (Pd), κ2-NO (Fe), κ2-CN (Rh), and κ1-C (Rh, Ag) motifs. For early metal examples coordination of a second phenoxyimine moiety is kinetically favored and probably more thermodynamically preferred than coordination of an NHC group. Cationic derivatives 4 and 7 are precatalysts for hydroamination and conjugate addition reactions, respectively, exhibiting good activity but poor enantioselectivity for the substrates investigated. The mixed metal complex 8 and the observed disparate coordination chemistry of the phenoxyimine and NHC moieties provide the opportunity for the synthesis of bimetallic precatalysts. Perhaps more fundamentally to the synthesis of monometallic κ3-CNO complexes the hydrogen bonding present in the phenol-imine moiety appears to retard formal deprotonation and access to mononuclear phenoxyimine catalysts. It is known that in contrast to phenol-imines related naphthol-imines are better represented as the enolized keto-amine tautomer11a and therefore may allow more facile access to κ3-CNO complexes.

Experimental Section All manipulations were performed under argon using standard Schlenk techniques unless stated otherwise. All solvents were dried (18) (a) Ma, Y. D.; Song, C.; Ma, C. Q.; Sun, Z. J.; Chai, Q.; Andrus, M. B. Angew. Chem., Int. Ed. 2003, 42, 5871. (b) Becht, J. M.; Bappert, E.; Helmchen, G. AdV. Synth. Catal. 2005, 347, 1495.

Dyson et al. over the appropriate drying agent and distilled under dinitrogen according to literature methods.19 Reagents were purchased from Aldrich, Acros, or Lancaster and used as supplied. [PdCl2(MeCN)2]20 and [Rh(COD)Cl]221 were prepared using literature procedures. NMR spectra were recorded at probe temperature on a JEOL 270 (1H, 270 MHz; 13C, 67.9 MHz), Brüker AV-300 (1H, 300 MHz; 13C, 75.5 MHz), Brüker AMX-500 (1H, 500 MHz; 13C, 125.7 MHz), or Brüker AV-700 (1H, 700 MHz, 13C, 175 MHz), respectively. Chemical shifts are described in parts per million downfield shifted from SiMe4 and are reported consecutively as position (δH or δC), relative integral, multiplicity (s ) singlet, d ) doublet, t ) triplet, q ) quartet, m ) multiplet, dd ) doublet of doublet, br ) broad), coupling constant (J/Hz), and assignment. Proton NMR spectra were referenced to the chemical shift of residual proton signals (CHCl3 δ 7.27, C6D5H δ 7.16, and CD2HCN δ 1.94). Carbon spectra were referenced to a 13C resonance of the solvent (CDCl3 δ 77.2, C6D6 δ 128.1, and CD3CN δ 118.3). 13C HSQC, PENDANT, and gradient HMBC experiments were performed using standard Brüker pulse sequences. Mass spectra were recorded on VG 70-250E or Kratos MS-50 spectrometers. Electrospray (ES) was recorded using methanol or acetonitrile as the mobile phase. Major fragments are given as percentages of the base peak intensity (100%). Elemental analyses were performed at the University of North London. Synthesis of 3-((1R,2R)-2-Aminocyclohexyl)-1-isopropyl-4phenyl-3H-imidazol-1-ium Chloride [C(H)NH2][Cl] (1b). To a water solution (200 mL) of 1a (3.50 g, 9.61 mmol) was added NaCl (1 g, 0.02 mol). The solution was stirred for 10 min, the volatiles were removed under reduced pressure, and the resulting solid was extracted with dichloromethane (3 × 50 mL). Removal of the volatiles gave 1b as a light orange solid. Yield ) 3.01 g, 98%. 1H NMR data are indistinguishable from 1a.7 Synthesis of 3-((1R,2R)-2-{[1-(3,5-Di-tert-butyl-2-hydroxyphenyl)meth-(E)-ylidene]amino}cyclohexyl)-1-isopropyl-4-phenyl3H-imidazol-1-ium Bromide [C(H)NO(H))][Br] (2a). A mixture (1a) (250 mg, 0.69 mmol), 3,5-di-tert-butyl-2-hydroxybenzaldehyde (193 mg, 0.82 mmol) and 4 Å molecular sieves (500 mg) were refluxed for 12 h in dry ethanol (5 mL). On cooling the volatiles were removed under reduced pressure to give a yellow solid, which was dissolved in dichloromethane (2 mL) and added dropwise to petroleum ether (50 mL) with stirring, precipitating a yellow solid. The solid was collected by filtration, and residual volatiles were removed under reduced pressure to give 2a as a yellow powder. Yield: 365 mg, 92%. 1H NMR (CDCl3, 270 MHz): δ 1.15 (9 H, s, C(CH3)3), 1.33–1.51 (4 H, m, c-hexCH2), 1.52 (3 H, d, 3JH-H ) 6.7 Hz, CH(CH3)2), 1.54 (3 H, d, 3JH-H ) 6.7 Hz, CH(CH3)2), 1.85 (2 H, m, c-hexCH2) 2.05 (1 H, m, c-hexCH2) 2.41 (1 H, m, c-hexCH2), 4.05 (1 H, m, CHNimine), 4.42 (1 H, m, CHNimid), 4.87 (1 H, sep, 3 JH-H CH(CH3)2), 6.92 (1 H, s, NCHC), 7.12–7.43 (7 H, m, PhCH), 8.38 (1 H, s, imineCH), 11.22 (NCHN), 12.86 (OH). 13C{1H} NMR (CDCl3, 67.9 MHz): δ 22.9, 23.0 (CHCH3), 24.9, 27.3, 28.6, 32.5 (c-hexCH2) 29.0, 31.1 (CH(CH3)3), 33.8, 34.6 (C(CH3)3), 53.4 (CH(CH3)2), 62.6 (c-hexCHNimid), 71.0 (c-hexCHNimine), 116.0 (NCHC), 117.1 (Cipso), 124.4 (Cipso), 126.1, 127.2, 129.0, 129.8, 130.5 (PhCH) 135.4 (NCHN), 135.9, 135.7, 140.1 (Cipso), 157.2 (COH), 166.9 (imineCH). MS (ESI): m/z 500 ([M - Br]+, 100%). MS (HRES): calc for C33H46N3O:500.3641, found 500.3637. Anal. [Found (calc)] C33H46BrN3O: C, 68.19 (68.26); H, 7.87 (7.99); N, 7.32 (7.24). [C(H)NO(H))][Cl] (2b). The procedure used for the synthesis of 2a was replicated for 2b using 1b (250 mg, 0.78 mmol) and 3,5-di-tert-butyl-2-hydroxybenzaldehyde (218 mg, 0.93 mmol) to (19) Armarego, W. L. F.; Perrin, D. D. Purification of Laboratory Chemicals, 4th ed.; Butterworth-Heinemann: Oxford, 1997. (20) Anderson, G. K.; Lin, M. Inorg. Synth. 1990, 28, 60. (21) Giordano, G.; Crabtree, R. H. Inorg. Synth. 1990, 28, 88.

Chiral N-Heterocyclic Carbene-Phenoxyimine Hybrid Ligand give 2b as a light yellow solid. Yield ) 386 mg, 92%. 1H NMR data are indistinguishable from 2a. Synthesis of [Pd(K3-CNO)Br] (3). To a THF (40 mL) solution of 2a (300 mg, 0.51 mmol) was added Pd(OAc)2 (120 mg, 0.51 mmol) dissolved in THF (15 mL), and the pale yellow solution was refluxed for 12 h to give a dark mixture. On cooling, the volatiles were removed under reduced pressure to give a black solid, which was dissolved in dichloromethane (10 mL) and dropped into hexane (50 mL) to give a black precipitate. Removal of the filtrate volatiles gave an orange solid, which was purified by flash chromatography (silica, eluted with toluene) to give 3 as an orange solid. Yield ) 227 mg, 65%. 1H NMR (C6D6, 500 MHz): δ 0.56 (2 H, m, c-hexCH2), 0.82 (3 H, d, 3J ) 6.5 Hz, CH(CH3)2), 0.99 (4 H, m, c-hexCH2), 1.14 (2 H, m, c-hexCH2), 1.28 (2 H, d, 3J ) 6.5 Hz, CH(CH3)2), 1.43 (9 H, s, C(CH3)3), 1.89 (9 H, s, C(CH3)3), 2.53 (1 H, m, c-hexCHimine), 4.65 (1 H, m, c-hexCHNHC), 6.04 (1 H, s, NCHCPh), 6.15 (1 H, m, CH(CH3)2), 7.09 (1 H, s, imineCH), 7.08–7.67 (7 H, m, PhCH). 13C NMR (C6D6, 67.9 MHz): δ 23.3 (CH(CH3)2), 23.4 (c-hexCH2), 24.4 (CH(CH3)2), 24.6 (c-hexCH2), 30.3 (C(CH3)3), 30.5 (c-hexCH2), 31.7 (C(CH3)3), 34.0 (C(CH3)3), 36.4 (C(CH3)3), 36.6 (c-hexCH2), 52.9 (CH(CH3)2), 65.4 (CHNimine), 67.9 (CHNNHC), 117.6 (NCHCPh), 122.6 (NCHCPh), 125.6 (PhCipso), 127.3, 129.4, 130.8, 131.0, 131.1 (PhCH), 132.9, 135.1, 143.3 (PhCipso), 156.3 (PdC), 163.1 (imineCH), 166.0 (CO). MS (ESI): m/z 735 ([M]+,10%), 655 ([M - Br]+, 100%). Anal. [Found (calc)] C33H44N3BrOPd · 1.5CH2Cl2: C 52.56 (52.78), H 6.71 (6.26), N 4.88 (4.92). Synthesis of [Pd(K3-CNO)MeCN][BF4] (4). To an acetonitrile solution of 3 (100 mg, 0.146 mmol) was added an acetonitrile solution of AgBF4 (26 mg, 0.146 mmol), immediately giving an off-white precipitate. The mixture was stirred in the absence of light for 1 h at 20 °C and filtered, and the volatiles were removed from the filtrate to give 4 as an orange solid. Yield ) 96 mg, 90%. 1 H NMR (C6D6, 500 MHz): δ 0.58, 0.75, 0.86, 0.97, 1.05, 1.09 (1 H, m, c-hexCH2), 1.29 (9 H, s, C(CH3)3), 1.30, 1.33 (1 H, m, c-hex CH2), 1.50 (3 H, d, 3J ) 6.5 Hz, CH(CH3)2), 1.62 (3 H, d, 3J ) 6.5 Hz, CH(CH3)2), 1.74 (9 H, s, C(CH3)3), 1.91 (3 H, s, CH3CN), 3.75 (1 H, m, c-hexCHimine), 4.37 (1 H, m, c-hexCHNHC), 5.14 (1 H, m, CH(CH3)2), 6.59 (1 H, s, NCHCPh), 7.08–7.23 (6 H, m, PhCH), 7.49 (1 H, s, imineCH), 7.65 (1 H, s, PhCH). 13C NMR (C6D6, 67.9 MHz): δ 2.1 (CH3CN), 23.6 (CH(CH3)3), 23.8 (CH(CH3)3), 24.2 (c-hexCH), 24.9 (c-hexCH), 30.0 (C(CH3)3), 30.7 (c-hexCH), 31.4 (C(CH3)3), 33.8 (c-hexCH), 35.9 (C(CH3)3), 36.9 (C(CH3)3), 53.0 (CH(CH3)3), 64.9 (CHNimine), 68.1 (CHNNHC), 117.3 (NCHCPh), 123.6 (NCHCPh), 123.9 (MeCN), 129.5 (2 over lapping signals), 131.1 (2 over lapping signals), 132.2 (PhCH), 134.3, 136.1, 141.1 (PhCipso), 149.5 (PdC), 163.7 (imineCH), 165.9 (CO). MS (ESI): m/z 633 ([M - MeCN]+, 100%). Anal. [Found (calc)] C35H44N4BF4OPd: C 57.25 (57.35), H 6.40 (6.46), N 7.63 (7.64). Synthesis of [Ag(K1-CNO(H))Br] (5a). A mixture of 2a (250 mg, 0.43 mmol) and silver(I)oxide (54 mg, 0.24 mmol) in dichloromethane (10 mL) was stirred in the absence of light for 24 h at 20 °C. The mixture was filtered through a Celite plug, and the volatiles were removed under reduced pressure to give 5a as a dark yellow solid. Yield ) 270 mg, 91%. 1H NMR (CDCl3, 270 MHz): δ 1.27 (9 H, s, C(CH3)3), 1.39 (3 H, d, 3JH-H ) 6.8 Hz CH(CH3)2), 1.47 (12 H, m, C(CH3)3 + CH(CH3)2), 1.30–2. 22, (7 H, m, c-hexCH2), 2.62 (1 H, m, c-hexCH2), 4.05, (1 H, m, c-hex CHNimine) 4.20 (1 H, m, c-hexCHNNHC), 4.76 (1 H, sep, 3JH-H ) 6.7 Hz, CH(CH3)2), 6.75 (1 H, s, NCHC), 6.93 (1 H, s, PhCH), 7.18–7.47 (6 H m, PhCH), 8.14 (1 H, s, imineCH), 13.01 (1 H, s, OH). 13C{1H} NMR (CDCl3, 67.5 MHz): δ 23.1, 23.4 (CH(CH3)2), 23.6, 25.0 (c-hexCH2), 28.9, 31.0 (C(CH3)3), 33.6 (c-hexCH2), 33.7, 33.9 (C(CH3)3), 34.5 (c-hexCH2), 55.1 (CH(CH3)2), 60.5 (cc-hex hexCHNNHC) 73.7 ( CHNimine), 113.7 (PhCipso), 117.0 (NCHC) Ph 125.0 ( Cipso) 126.8, 127.0, 128.4, 129.1, 129.8, (PhCH), 135.9, 137.0, 139.9 (PhCipso), 156.7 (COH), 157.0 (AgC), 165.6 (imineCH).

Organometallics, Vol. 27, No. 2, 2008 287 MS (ESI): m/z 500 [M - AgBr]+ (100%), 606 [M - HBr]+ (55%). M/S (HRES): calc for C66H90AgN6O2, 1105.6171; found, 1105.6171. Synthesis of [Ag(K1-CNO(H))Cl] (5b). A mixture of 2b (1.100 g, 2.05 mmol), silver(I) oxide (285 mg, 1.23 mmol), and 4 Å (500 mg) molecular sieves in dichloromethane (50 mL) was stirred in the absence of light for 12 h at 20 °C. The mixture was filtered, and the volatiles were removed from the filtrate under reduced pressure to give 5b as a light brown solid. Yield ) 1.300 g, 98%. 1 H NMR (CDCl3, 270 MHz): δ 1.26 (9 H, s, C(CH3)3), 1.38 (3 H, d, CH(CH3)2), 1.43 (9 H, s, C(CH3)3), 1.45 (3 H, d, CH(CH3)2), 1.73, 1.92, 2.14, 2.54 (8 H, m, c-hexCH2), 4.04 (1 H, m, c-hexCHimine), 4.22 (1 H, m, c-hexCHNHC), 4.75 (1 H, m, CH(CH3)2), 6.75 (1 H, s, NCHCPh), 6.92–7.46 (7 H, m, PhCH), 8.12 (1 H, s, imineCH), 12.99 (1 H, s, OH). 13C{1H} NMR (CDCl3, 67.9 MHz): δ 23.5 (CH(CH3)2), 23.8 (CH2), 24.1 (CH(CH3)2), 25.4 (CH2), 29.3 (C(CH3)3), 31.4 (C(CH3)3), 34.0 (CH2), 34.1 (C(CH3)3), 34.4 (CH2), 34.9 (C(CH3)3), 55.4 (CH(CH3)2), 60.9 (c-hexCHNHC), 74.1 (c-hexCHimine), 114.1 (NCHCPh), 117.5 (NCHCPh), 126.2, 127.1 (PhCH), 127.4 (PhCipso) 128.8, 129.6, 130.2 (PhCH), 136.3, 137.2 140.4 (PhCipso), 157.1 (COH), 166.0 (imineCH), AgC not observed. MS (ESI): m/z 1107 ([2M - Ag - 2Cl]), 100%. Anal. [Found (calc)] C33H45N3ClOAg: C 61.72 (61.64), H 7.13 (7.05), N 6.50 (6.53). Synthesis of [Rh(K1-CNO(H))Cl] (6). To a dichloromethane (10 mL) solution of 5 (174 mg, 0.43 mmol) was added a dichloromethane (5 mL) solution of [Rh(COD)Cl]2 (105 mg, 0.21 mmol), immediately giving a white precipitate. The mixture was stirred for 1 h at 20 °C and filtered, and the solvent was removed from the filtrate to give a yellow solid, which was purified by flash chromatography (silica, eluted with dichloromethane) to give 6 as a yellow solid. Yield ) 192 mg, 60%. 1H NMR (C6D6, 500 MHz): δ 1.10 (3 H, d, 3J ) 6.5 Hz, CH(CH3)2), 1.28 (9 H, s, C(CH3)3), 1.47 (3 H, d, 3J ) 6.5 Hz, CH(CH3)2), 1.71 (9 H, s, C(CH3)3), 1.99–2.11 (7 H, m, c-hexCH2), 2.53 (4 H, m, CODCH2), 3.13 (1 H, m, c-hexCH2)), 3.35 (1 H, m, CODCH), 4.22 (1 H, m, c-hexCHNHC), 4.77 (1 H, m, CODCH), 5.05 (1 H, m, c-hexCHimine), 5.37 (1H, m, COD CH), 5.57 (1 H, s, PhCH), 5.62 (1 H, m, CODCH), 6.10 (1 H, s, NCHCPh), 6.35 (1 H, m, NCH(CH3)2), 7.11–7.58 (6 H, m, PhCH), 9.25 (1 H, s, imineCH), 13.94 (1 H, s, OH). 13C{1H} NMR (C6D6, 126 MHz): δ 22.0 (CH(CH3)2), 24.4 (CH2), 25.0 (CH(CH3)2), 26.3 (CH2), 27.5 (CH2), 29.9 (C(CH3)3), 31.0 (CH2), 31.5 (C(CH3)3), 31.7 (CH2), 32.3 (CH2), 34.0 (C(CH3)3), 34.3(CH2), 35.0 (CH2), 35.4 (C(CH3)3), 54.9 (NCH(CH3)2), 63.2(c-hexCHNHC), 67.8 (CODCH), 70.3 (CODCH), 71.3(c-hexCHimine), 97.0 (CODCH), 97.4 (CODCH), 113.8 (NCHCPh)), 119.1 (NCHCPh), 126.5, 127.3, 128.9, 129.5, 129.9 (PhCH), 130.1, 132.5, 136.5, 139.9 (PhCipso), 158.6 (COH), 168.7 (imineCH), 183.3 (d, 1JRh-C ) 52 Hz, RhC). MS (ESI): m/z 710 ([M - Cl]+, 100%). Anal. [Found (calc)] for C41H58N3ClORh: C 66.05 (65.90); H 7.70 (7.82); N 5.58 (5.62). Synthesis of [Rh(K2-CNO(H))][B{3,5-(CF3)2C6H3}4] (7). To a dichloromethane solution (10 mL) of 6 (152 mg, 0.200 mmol) was added solid Na[B{3,5-(CF3)2C6H3}4] (260 mg, 0.290 mmol), and the mixture was stirred for 15 min at 20 °C. The mixture was then washed with water (2 × 15 mL) and the organic layer retained and dried over MgSO4. On filtration the volatiles were removed from the filtrate under reduced pressure to give 7 as a yellow solid. Yield ) 309 mg, 98%. 1H NMR (CDCl3, 700 MHz): δ 1.38 (6 H, d, 3J ) 7 Hz, CH(CH3)2), 1.40 (6 H, d, 3J ) 7 Hz, CH(CH3)2), 1.44 (9 H, s, C(CH3)3), 1.49 (9 H, s, C(CH3)3), 1.82–2.45 (12 H, m, c-hexCH2 + CODCH2), 3.41 (1 H, m, c-hexCHimine), 3.76 (1 H, m, CODCH), 4.08 (1 H, m, CODCH), 4.27 (1 H, m, CODCH), 4.77 (1 H, m, COD CH), 4.93 (1 H, m, NCH(CH3)2), 6.22 (1 H, m, c-hexCHNHC), 6.57 (1 H, s, 1 H, s, OH), 6.74 (1 H, s, NCHCPhN), 7.25–8.08 (12 H, m, PhCH), 8.71 (imineCH). 13C{1H} NMR (CDCl3, 175 MHz): δ 23.3 (CH(CH3)2), 24.5 (CH2), 24.9 (CH2), 25.7 (CH(CH3)2), 27.9 (CH2), 28.7 (CH2), 29.3 (CH2), 29.5 (CH2), 30.1 (C(CH3)3), 31.4 (C(CH3)3), 32.9 (CH2), 34.4 (C(CH3)3), 34.6 (C(CH3)3), 35.3 (CH2),

288 Organometallics, Vol. 27, No. 2, 2008 52.1 (NCH(CH3)2), 68.1 (c-hexCHNHC), 71.8 (CODCH), 71.9 (CODCH), 73.2 (c-hexCHHimine), 96.9 (CODCH), 99.8 (CODCH), 117.0 (NCHCPh), 117.5 (BArFCHpara), 118.9 (NCHCPh), 120.1 (PhCH), 123.2 (PhCipso), 124.5 (q, 2J ) 273 Hz, BArFCF3), 128.9 (m, BArF F3CCipso), 129.7, 130.1, 130.5, 130.8 (PhCH) 134.8 (BArFCHorPh 2 tho), 135.2, 136.8, 143.2 ( Cipso) 155.8 (COH), 161.7 (q, J ) 51 BArF imine 1 Hz, BCipso), 168.6 ( CH), 174.9 (d, J ) 51 Hz, RhC). MS (FAB): m/z 710 ([M - BArF]+), 100%. Anal. [Found (calc)] for C73H69N3BF24ORh: C 55.88 (55.70), H, 4.56 (4.42), N 2.72 (2.67). Synthesis of [Fe(K2-C(AgBr)NO)2] (8). To a tetrahydrofuran (30 mL) solution of [Fe(II){N(SiMe3)2}2] (82 mg, 0.22 mmol) cooled to -78 °C was added a tetrahydrofuran (20 mL) suspension of 5a (300 mg, 0.44 mmol) cooled to -78 °C. The mixture was allowed to warm to room temperature over 3 h, giving an orange solution, which was stirred for a further 16 h. The volatiles were removed under reduced pressure, and the resulting red-orange solid was washed with hexane (2 × 10 mL) to give 8 as a red-orange powder. Yield: 256 mg, 81%. M/S (ESI): m/z 500 [M - FeAg2Br2]+ 100%, 1133 [M -Ag2Br]+ 55%. Anal. [Found (calc)] C66H88N6Ag2Br2O2: C 56.00 (55.48), H 6.27 (6.21), N 5.80 (5.88). Catalytic Hydroamination. To a toluene solution (0.5 mL) of piperidine (0.04 mL, 0.5 mmol) and methacrylonitrile (0.135 mL, 2.0 mmol) was added 4 (17.3 mg, 10 µmol). The mixture was then stirred at 40 °C for 12 h. After cooling, toluene (1 mL) was added and the mixture passed through a silica plug, followed by addition of diethylene glycol dibutyl ether (internal standard, 1.123 mL, 0.5 mmol). Yield of 3-(piperidin-1-yl)butanenitrile was determined using GC. Enantiomer separation was achieved on a Cyclosil-B column at 115 °C iso, tR ) 37.6 and 38.9 min. Catalytic Conjugate Addition. To a 10:1 dioxane/water (5 mL) solution of 7 (9.8 mg, 6.24 µmol) was added boronic acid (0.41 mmol), enone (0.21 mmol), and triethyl amine (42 mg, 0.41 mmol) and the solution refluxed for 3 h. After cooling, ethyl acetate (3 mL) was added and the solution washed with water (2 × 5 mL). The organic layer was collected and dried over magnesium sulfate, and the volatiles were removed under reduced pressure to give a pale yellow solid or oil. The solid/oil was subsequently dissolved in 1:1 dichloromethane/hexane solution (3 mL) and passed through a silica plug, and enantioselectivity was determined by chiral HPLC

Dyson et al. using a Chiralcel OD column, at a flow of 1.0 mL/min (98% hexane, 2% 2-propanol) at 20 °C. tR ) 8.5 min 3-phenylcyclopentanone (S), 10.8 3-phenylcyclopentanone (R); 25.0 3-phenylcyclohexanone (S), 26.9 3-phenylcyclohexanone (R); 28.4 3-(4-methoxy)phenylcyclopentanone (S), 30.1 3-phenylcyclopentanone (R); 27.6 3-(4methoxy)phenylcyclohexanone (S), 28.5 3-(4-methoxy) phenylcyclohexanone (R); 8.3 4-phenylnonenone (S), 8.7 4-phenylnonenone (R). Crystallographic Studies. [Pd(K3-CNO)Br] (3), [Rh(K1-CNO(H))Cl] (6), and [Fe(K2-C(AgBr)NO)2] (8). Single crystals of 3 and 6 were grown from vapor diffusion of pentane into a benzene solution of the complex. Single crystals of 8 were grown by cooling a hexane/toluene solution of 8 to -40 °C. Crystals were mounted on glass fibers with STP oil and immediately cooled to 110 K in a dinitrogen gas stream on the diffractometer. Data were collected on a Bruker Smart 6000 diffractometer equipped with a molybdenum source with a CCD detector. Structures were solved and refined by full-matrix least-squares on F2 using SHELX programs.22 All hydrogen atoms, except H(1) for complex 6, were placed in calculated positions using a riding model. Atom H(1) was found in a difference map. For complex 8 the toluene of crystallization exhibits some disorder in position. However, attempts to model using two positions failed; hence the single-position model used has large and prolate anisotropic displacement parameters. Atom C(62) was restrained to be more isotropic to prevent a nonpositive definite.

Acknowledgment. The authors thank EPSRC for financial support (G.D. and J.C.F.), Johnson Matthey PLC for palladium and rhodium salts, and Dr. Gideon Grogan for chiral GC analysis of 3-(piperidin-1-yl)butanenitrile. Supporting Information Available: X-ray crystallographic files in CIF format for complexes 3, 6, and 8. This information is available free of charge via the Internet at http://pubs.acs.org. OM7009478 (22) Sheldrick, G. A. SHELX; University of Göttingen: Göttingen, Germany, 1997.