Synthesis of 5, 5 '-Bicalix [6] arene and 5, 5 '-Bicalix [8] arene Systems

clic structures have received, in recent years, increased attention, and several preorganized structures have been described. The majority of work has...
2 downloads 0 Views 94KB Size
8018

J. Org. Chem. 1999, 64, 8018-8020

Synthesis of 5,5′-Bicalix[6]arene and 5,5′-Bicalix[8]arene Systems Alessandra Bottino,† Francesca Cunsolo,† Mario Piattelli,† Domenico Garozzo,‡ and Placido Neri*,§ Istituto per lo Studio delle Sostanze Naturali di Interesse Alimentare e Chimico-Farmaceutico, CNR, Via del Santuario 110, I-95028 Valverde (CT), Italy, Istituto per la Chimica e Tecnologia dei Materiali Polimerici, CNR, Viale A. Doria 6, I-95125 Catania, Italy, and Dipartimento di Chimica, Universita` di Salerno, Via S. Allende, I-84081 Baronissi (SA), Italy Received March 22, 1999

Design and construction of high-order di- or polytopic receptors is a current goal of supramolecular chemistry for the investigation of high-level host properties such as cooperativity, allostery, regulation, etc.1 Consequently, also in the calixarene field2 double or multiple macrocyclic structures have received, in recent years, increased attention, and several preorganized structures have been described. The majority of work has been focused on double calix[4]arenes3 in which the two subunits are linked at their upper (head) or lower (tail) rim through various spacer elements to give three basic combinations commonly known as head-to-head, head-to-tail, and tailto-tail.4 As concerns the larger members of the family, to the best of our knowledge, only two examples are known, both relating to double calix[6]arenes. They are a molecular capsule reported by Shinkai5 having two units linked head-to-head through six sulfur bridges and a dixanthylene derivative, described by Biali, in which two calix[6]arenes are connected at the level of ArCH2Ar groups.6 No example is presently available of double or multiple calix[8]arenes. Recently we have reported the first example of a bridgeless, head-to-head double calix[4]arene, 5,5′-bicalix[4]arene 1, with a direct biphenyl-like para-para linkage.7 Its structural features readily evoke a potential host cooperativity which was confirmed by preliminary studies.7 This result prompted us to a deeper investigation of chemical8 and host properties of 5,5′-bicalix[4]arenes and to tackle the synthesis of larger bicalix[n]arene * To whom correspondence should be addressed. Phone: +39-089965370. Fax: +39-089-965296. E-mail: [email protected]. † Istituto per lo Studio delle Sostanze Naturali di Interesse Alimentare e Chimico-Farmaceutico, CNR. ‡ Istituto per la Chimica e Tecnologia dei Materiali Polimerici, CNR. § Universita ` di Salerno. (1) Lehn, J. M. Supramolecular Chemistry, Concepts and Perspectives; VCH: Weinheim, 1995. (2) For comprehensive reviews on calixarenes see: Calixarenes, a Versatile Class of Macrocyclic Compounds; Vicens, J., Bo¨hmer, V., Eds.; Kluwer: Dordrecht, The Netherlands, 1991. Bo¨hmer, V. Angew. Chem., Int. Ed. Engl. 1995, 34, 713. Ikeda, A.; Shinkai, S. Chem. Rev. 1997, 97, 1713. Gutsche, C. D. Calixarenes Revisited; The Royal Society of Chemistry: Cambridge, 1998. (3) Asfari, Z.; Weiss, J.; Vicens, J. Synlett 1993, 719. (4) Wasikievicz, W.; Rokicki, G.; Kielkiewicz, J.; Bo¨hmer, V. Angew. Chem., Int. Ed. Engl. 1994, 33, 214. See also literature cited in ref 7. (5) Akimura, T.; Matsumoto, S.; Teshima, O.; Nagasaki, T.; Shinkai, S. Tetrahedron Lett. 1991, 32, 5111. (6) Aleksiuk, O.; Biali, S. E. J. Org. Chem. 1996, 61, 5670. (7) Neri, P.; Bottino, A.; Cunsolo, F.; Piattelli, M.; Gavuzzo, E. Angew. Chem., Int. Ed. 1998, 37, 166. (8) For a preliminary report on the O-alkylation of 5,5′-bicalix[4]arene see: Bottino, A.; Cunsolo, F.; Piattelli, M.; Neri, P. Tetrahedron Lett. 1998, 39, 9549.

systems, very promising novel molecular architectures. In the present paper we report the synthesis, spectroscopic characterization, and conformational features of the first 5,5′-bicalix[6]arene 2 and 5,5′-bicalix[8]arene 3.

As concerns the synthesis of 2, by analogy with the synthesis of 5,5′-bicalix[4]arene 1,7 we first attempted the direct oxidative coupling with ferric chloride of p-H-calix[6]arene 2a which proved useless, probably because of extensive polymerization and polyoxidation. Therefore, to circumvent this difficulty, we resorted to a protectiondeprotection procedure using a pentaprotected calix[6]arene. The absence in the literature of a useful procedure for the preparation of this kind of derivative2 induced us to pursue a careful investigation of the benzoylation of p-H-calix[6]arene 2a. Thus, pentabenzoylcalix[6]arene 2b was prepared in 93% yield by treatment of 2a with benzoyl chloride in pyridine (Scheme 1).9 At room temperature the hitherto unreported 2b [MALDI-TOF(+) MS 1158 m/z, MH+] shows an extremely broad NMR spectrum, since introduction of five benzoyl groups causes a considerable reduction of conformational mobility in solution. However, on heating at 360 K in C6D6 the 1H NMR spectrum shows three diagnostic sharp singlets of equal intensity at 3.81, 3.85, and 3.90 ppm for the ArCH2Ar groups, as expected by the molecular symmetry of 2b. Pentabenzoylcalix[6]arene 2b was then subjected to oxidative coupling by treatment with FeCl3‚6H2O in refluxing CH3CN, under the conditions previously adopted for bicalix[4]arene,7 to give decabenzoyl-5,5′-bicalix[6]arene. This was directly hydrolyzed without purification to give, after column chromatography on Si gel, 5,5′bicalix[6]arene 2 in 20% yield (Scheme 1).10 Its structure was established by elemental analysis, MALDI-TOF(+) (9) Under similar conditions Gutsche and co-workers have isolated hexabenzoyl-p-H-calix[6]arene (Gutsche, C. D.; Lin, L.-g. Tetrahedron 1986, 42, 1633), while in the presence of NaH, the tetrabenzoyl derivative was obtained (Rogers, J. S.; Gutsche, C. D. J. Org. Chem. 1992, 57, 3152). (10) The complete IUPAC name for this compound is 5,5′-bicalix[6]arene-37,37′,38,38′,39,39′,40,40′,41,41′,42,42′-dodecaol.

10.1021/jo9905017 CCC: $18.00 © 1999 American Chemical Society Published on Web 09/17/1999

Notes

J. Org. Chem., Vol. 64, No. 21, 1999 8019 Scheme 1

Figure 1. Polytube computer model (H-atoms omitted) of the anti-pinched-cones conformation of 5,5′-bicalix[6]arene 2.

MS (1272 m/z, MH+), and 1H and 13C NMR spectroscopy. In this case also the 1H NMR spectrum at room temperature exhibited broad signals because of the stabilizing cyclic hydrogen bond involving the free OH groups of the two macrocycles that accordingly give rise to a broad 12 H resonance at 10.40 ppm.11 In C6D6 at 369 K the peaks sharpen, and three signals for ArCH2Ar are seen at 3.75, 3.76, and 3.81 ppm, in agreement with the molecular symmetry. Formation of the biphenyl bond was confirmed by a characteristic singlet at 135.0 ppm in the 13C NMR spectrum for quaternary carbons (DEPT) involved in the Ar-Ar bond.7 As in the previous case, synthesis of a bicalix[8]arene system by direct oxidative coupling of p-H-calix[8]arene (3a with R ) H) proved unsatisfactory. Therefore, to also apply in this case a protection-deprotection procedure, we resorted to heptakis(p-bromobenzoyl)-p-tert-butylcalix[8]arene 3b, easily obtained from 3a in good yield without chromatographic purification (Scheme 1).12 Obviously, in this instance (selective) removal of the tert-butyl group of the free phenolic moiety is required to allow oxidative coupling. This was accomplished by treatment of 3b with AlCl3 (30 equiv) in anhydrous toluene (Scheme 1), which gave mono-de-tert-butylated heptabenzoylcalix[8]arene 3c in 98% yield.13 Compound 3c was fully characterized by 1H and 13C NMR spectroscopy in C6D6 at 365 K. In (11) Gutsche, C. D.; Bauer, L. J. J. Am. Chem. Soc. 1985, 107, 6052. (12) Consoli, G. M. L.; Cunsolo, F.; Piattelli, M.; Neri, P. J. Org. Chem. 1996, 61, 2195. (13) For examples of selective trans-de-tert-butylation in smaller calixarenes see: van Loon, J. D.; Arduini, A.; Coppi, L.; Verboom, W.; Pochini, A.; Ungaro, R.; Harkema, S. and Reinhoudt, D. N. J. Org. Chem. 1990, 55, 5639. See, K. A.; Fronczek, F. R.; Watson, W. H.; Kashyap, R. P.; Gutsche, C. D. J. Org. Chem. 1991, 56, 7256. de Mendoza, J.; Carramolino, M.; Cuevas, F.; Nieto, P. M.; Prados, P.; Reinhoudt, D. N.; Verboom, W.; Ungaro, R.; Casnati, A. Synthesis 1994, 47.

particular, mono-de-tert-butylation was proved by a typical ortho-coupled triplet at 6.73 ppm (8.3 Hz) in the 1H NMR spectrum and by the appearance of a doublet at 120.0 ppm in the 13C NMR spectra. It is worth mentioning here that the preparation of 3c is the first example of a selective reaction at the upper rim of a preformed calix[8]arene.14 At this point hepta-tert-butylcalix[8]arene 3c was subjected to oxidative coupling by treatment with FeCl3‚ 6H2O followed by alkaline hydrolysis to yield p-tert-butyl5,5′-bicalix[8]arene 3 in 25% yield (Scheme 1).15 Its dimeric nature was proved by a pseudomolecular peak at 2482 m/z in the MALDI-TOF(+) mass spectrum and by a singlet at 135.8 ppm for biphenylic quaternary carbons in the 13C NMR spectra. As expected, NMR spectra of 3 showed broad resonances because of the reduced conformational mobility due to the cyclic hydrogen bond present in each macrocycle, evidenced by broad 1H NMR signals at δ 9.50 (2 H), 9.54 (4 H), 9.57 (8 H), and 9.78 (2 H).11 The observation of the signal patterns expected from the molecular symmetry of 3 is made difficult by the overlapping of NMR resonances occurring even under different conditions. For example, a partially resolved four-singlet pattern in a 2:2:2:1 ratio expected for the tert-butyl groups is only observed in (CD3)2SO at T > 400 K. The conformational mobility of 5,5′-bicalix[6]arene 2 and p-tert-butyl-5,5′-bicalix[8]arene 3, pointed out by dynamic NMR spectra, can be due to two main conformational processes, passage of phenol rings through the annulus, and rotation around the biphenyl-like junction.7 In the case of 2 molecular modeling16 indicates that it should prefer the pinched-cone conformation17 for the two subunits, which can be syn or anti oriented according to the torsion angle around the biphenyl bond (32.8° or 132.0°, respectively). Evaluation of MM3 energy in chloroform-model-solvent indicates that the anti orientation (Figure 1) should be preferred since it is slightly more stable than the syn one. Therefore, the molecule in solution should turn rapidly from the anti to the syn orientation and vice versa while the cone-to-cone interconversion has to be within the NMR time scale, as confirmed by the coalescence at 276 K for ArCH2Ar (14) An example of calix[8]arene selectively functionalized at the upper rim was recently obtained by condensation of fragments already bearing different functions: Tsue, H.; Ohmori, M.; Hirao, K. J. Org. Chem. 1998, 63, 4866. (15) The complete IUPAC name for this compound is 11,11′,17,17′,23,23′,29,29′,35,35′,41,41′,47,47′-tetradeca-tert-butyl-5,5′-bicalix[8]arene49,49′,50,50′,51,51′,52,52′,53,53′,54,54′,55,55′,56,56′-hexadecaol. (16) Energies were evaluated with the MM3 force field with GB/SA chloroform-model-solvent as implemented in the program MacroModel V4.5: Mohamadi, F.; Richards, N. G. J.; Guida, W. C.; Liskamp, R.; Lipton, M.; Caufield, C.; Chang, G.; Hendrickson, T.; Still, W. C. J. Comput. Chem. 1990, 11, 440. (17) Molins, M. A.; Nieto, P. M.; Sanchez, C.; Prados, P.; de Mendoza, J.; Pons, M. J. Org. Chem. 1992, 57, 6924. van Hoorn, W. P.; van Veggel, F. C. J. M.; Reinhoudt, D. N. J. Org. Chem. 1996, 61, 7180.

8020

J. Org. Chem., Vol. 64, No. 21, 1999

Figure 2. Polytube computer model (H-atoms omitted) of the quasi-planar-pleated-loops conformation of p-tert-butyl-5,5′bicalix[8]arene 3.

signals which give a roughly estimated energy barrier of ca. 13 kcal/mol. Interestingly, at low temperature the 1H NMR spectrum of 2 becomes reminiscent of that of p-tert-butylcalix[6]arene17 (2a with R ) But), indicating a similar conformation, thus lending support to modeling studies. Molecular modeling16 for 3 indicates that the pleatedloop should be the most favored conformation for each calix[8]arene subunit.11,14,18 In this case, rotation around the biphenyl bond does not give rise to a syn-anti equilibrium because of the planarity of each pleated-loop. In fact, two conformations are found in which the two pleated-loops are quasi-orthogonal (biphenyl torsion angle 125.0°) or quasi-planar (biphenyl torsion angle 36.6°), the latter being 4.5 kcal/mol more stable. In the quasi-planar structure (Figure 2) the tert-butyls of the rings adjacent to the biphenyl system give rise to favorable van der Waals interactions as well as to additional steric encumbrance to the biphenyl rotation. Therefore, p-tert-butyl5,5′-bicalix[8]arene 3 should preferentially adopt in solution the quasi-planar-pleated-loops conformation, which can also interconvert to its mirror image by the “normal” through-the-annulus flipping of phenol rings, as confirmed by a typical coalescence at 330 K for ArCH2Ar signals (energy barrier of ca. 13 kcal/mol).11 The new members of the 5,5′-bicalixarene family described here open up further potentialities in the field of host-guest chemistry, in particular as ditopic receptors, and constitute versatile skeletons for the construction of various and interesting three-dimensional molecular architectures, with peculiar stereochemical features, exploitable in supramolecular chemistry. Work along these lines is currently in progress in our laboratory. Experimental Section General Comments. Elemental analyses were obtained from the Department of Pharmaceutical Sciences, University of Catania. All chemicals were reagent grade and used without further purification. p-H-calix[6]arene9 2a and heptakis(pbromobenzoyl)-p-tert-butylcalix[8]arene 3b12 were prepared following literature procedures. NMR spectra were acquired at 250.13 (1H) and 62.9 (13C) MHz under specified conditions. MALDI-TOF mass spectra were acquired using dithranol (1,8,9trihydroxyanthracene) as matrix. (18) Gutsche, C. D.; Gutsche, A. E.; Karaulov, A. I. J. Incl. Phenom. 1985, 3, 447.

Notes Preparation of Pentabenzoyl-p-H-calix[6]arene 2b. p-Hcalix[6]arene (2a) (1 g, 1.57 mmol) was added to a solution of benzoyl chloride (1.35 mL, 11.6 mmol) in anhydrous pyridine (20 mL), and the suspension was stirred at room temperature for 5 h. The reaction was then quenched by pouring the mixture into 2 N HCl (100 mL), and the precipitate was collected by filtration and washed sequentially with 2 N NaOH, H2O, and MeOH to give 37,38,39,40,41-pentakis(benzoyloxy)calix[6]aren42-ol (2b): 1.7 g, 93% yield; 1H NMR (250 MHz, C6D6, 363 K) δ 3.81, 3.85, 3.90 (s, 4 H each), 6.60-7.20 (m, 33 H), 7.71-8.00 (m, 10 H); 13C NMR (62.9 MHz, CDCl3) δ 31.2 (t), 119.9, 126.1, 127.0 (s), 128.4, 130.1 (d), 132.2, 132.5, 147.0, 153.2, 164.3 (s); MALDI-TOF(+) MS 1158 m/z (MH+). Anal. Calcd for C77H56O11: C, 79.91; H, 4.88. Found: C, 79.89; H, 4.86. Mono-de-tert-butylation of Heptakis(p-bromobenzoyl)p-tert-butylcalix[8]arene 3b To Give 3c. AlCl3 (7.5 g, 56.2 mmol) was added to a suspension of 3b (5 g, 1.9 mmol) in anhydrous toluene (130 mL), and the mixture was kept under stirring for 2 h at room temperature. The reaction was then quenched by adding 1 N HCl (100 mL). The organic phase was evaporated in vacuo, leaving 11,17,23,29,35,41,47-hepta-tertbutyl-49,50,51,52,53,54,55-heptakis[(4-bromobenzoyl)oxy]calix[8]aren-56-ol (3c): white powder, 4.7 g, 98% yield; 1H NMR (250 MHz, C6D6, 360 K) δ 1.01, 1.03, 1.05, 1.09 (s, 18 H, 9 H, 18 H, 18 H), 3.83, 3.88, 3.95 (bs, 4 H, 8 H, 4 H), 6.73 (t, J ) 8.3 Hz, 1 H), 6.97 (d, J ) 8.3 Hz, 2 H), 7.07-7.22 (m, 14 H), 7.41-7.61 (m, 28 H);13C NMR (62.9 MHz, C6D6 375 K) δ 31.4, 31.5 (q), 33.0, 33.8 (t), 34.4 (s), 120.7, 125.7, 126.6, 126.9, 130.8, 131.9, 132.0, 132.2 (d), 146.1, 146.2, 146.4, 149.3, 149.4, 153.4, 163.9, 164.0, 164.3 (s); MALDI-TOF(+) MS 2524 m/z (MH+). Anal. Calcd for C133H125O15Br7: C, 63.32; H, 4.99. Found: C, 63.38; H, 5.00. General Procedure for Oxidative Coupling of 2b and 3c. A suspension of 2b or 3c (1 mmol) and FeCl3‚6H2O (8 mmol) in CH3CN (50 mL) was refluxed under stirring. Additional aliquots of FeCl3‚6H2O (8 mmol) were added at 1-h intervals, until the starting material was no longer detected by TLC. The solvent was then removed by evaporation in vacuo, 2 N HCl was added to the residue, and the solid material was collected by filtration. This crude product was suspended in EtOH (85 mL), and after addition of 15% aqueous NaOH (13 mL) the mixture was refluxed under stirring for 7 h. Most of the EtOH was removed by evaporation in vacuo, the resulting suspension was neutralized with 1 N HCl, and the solid material was collected by filtration. 5,5′-Bicalix[6]arene-37,37′,38,38′,39,39′,40,40′,41,41′,42,42′dodecaol (2). Compound 2 was obtained (0.25 g, 20% yield) after purification by flash chromatography on Si gel (CH2Cl2/ petroleum ether, 45:55 v/v): mp dec 250 °C; Rf 0.5 (CH2Cl2/ petroleum ether, 1:1 v/v); 1H NMR (250 MHz, C6D6, 363 K) δ 3.75, 3.76, 3.81 (s, 8 H each), 6.68 (t, J ) 7.5 Hz, 4 H), 6.70 (t, J ) 7.5 Hz, 4 H), 6.71 (t, J ) 7.5 Hz, 4 H), 6.97-7.00 (m, 18 H), 7.27 (s, 4 H), 10.23 (br s, 12 H); 13C NMR (62.9 MHz, CDCl3) δ 32.2, 32.3 (t), 121.9 (d), 127.2, 127.4, 127.6 (s), 128.2, 129.5 (d), 135.0, 148.9, 149.6 (s); MALDI-TOF(+) MS 1272 m/z (MH+). Anal. Calcd for C84H70O12: C, 79.35; H, 5.55. Found: C, 79.30; H, 5.56. 11,11′,17,17′,23,23′,29,29′,35,35′,41,41′,47,47′-Tetradecatert-butyl-5,5′-bicalix[8]arene-49,49′,50,50′,51,51′,52,52′,53,53′,54,54′,55,55′,56,56′-hexadecaol (3). Compound 3 was isolated (0.62 g, 25% yield) by flash chromatography on Si gel (CH2Cl2/petroleum ether, 1:3 v/v); mp dec 235 °C; Rf 0.4 (CH2Cl2/petroleum ether, 1:4 v/v); 1H NMR [250 MHz, (CD3)2SO, 390 K] δ 1.25, 1.28, 1.29, 1.30 (s, 18 H, 36 H, 36 H, 36 H), 3.16 (br s, 32 H), 7.13 (br s, 32 H), 9.20 (br s, 16 H); 13C NMR (62.9 MHz, CDCl3) δ 31.5, 31.6 (q), 32.4 (t), 34.1 (s), 125.6, 126.0, 127.6 (d), 128.3, 128.7 (s), 128.8 (d), 129.4, 135.8, 144.8, 144.9, 146.6, 146.7, 148.4 (s); MALDI-TOF(+) MS 2482 m/z (MH+). Anal. Calcd for C168H206O16: C, 81.32; H, 8.37. Found: C, 81.35; H, 8.34.

JO9905017