Synthesis of Hollow Ag–Au Bimetallic ... - ACS Publications

May 3, 2013 - ... by Au-Ag bimetallic nanoparticles supported on LDH: Homogeneous vs. heterogeneous catalysis. Nidhi Arora , Akansha Mehta , Amit Mish...
0 downloads 0 Views 4MB Size
Subscriber access provided by UNIV LAVAL

Article

Synthesis of Hollow Ag-Au Bimetallic Nanoparticles in Polyelectrolyte Multilayers Xin Zhang, Guangyu Zhang, Bodong Zhang, and Zhaohui Su Langmuir, Just Accepted Manuscript • DOI: 10.1021/la400728k • Publication Date (Web): 03 May 2013 Downloaded from http://pubs.acs.org on May 5, 2013

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Langmuir is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1

Synthesis of Hollow Ag-Au Bimetallic Nanoparticles in

2

Polyelectrolyte Multilayers

3

Xin Zhang, Guangyu Zhang, Bodong Zhang, Zhaohui Su*

4

State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry,

5

Chinese Academy of Sciences, Changchun 130022, P. R. China

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ACS Paragon Plus Environment

1

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 17

1

ABSTRACT: Ag nanoparticles of ~20 nm size and rather uniform size distribution were synthesized in

2

polyelectrolyte multilayers (PEMs) via an ion-exchange/reduction process in two stages (seeding and

3

growth), which were used as sacrificial templates to fabricate Ag-Au bimetallic hollow nanoparticles via

4

galvanic replacement reaction. The reaction process was monitored by UV-vis spectroscopy. The

5

morphology and structure of the nanoparticles were characterized by transmission electron microscopy

6

(TEM) and energy dispersive X-ray spectroscopy, which confirmed the formation of hollow Ag-Au

7

bimetallic nanoparticles. UV-vis absorbance spectroscopy and TEM results indicated that both size and

8

optical properties of the Ag nanoparticles in the PEM can be controlled by manipulating ion content in

9

the PEM and the number of the ion-exchange/reduction cycle, whereas that of Ag-Au bimetallic

10

nanoparticles were dependent on size of the Ag templates and the replacement reaction kinetics. The

11

hollow Ag-Au bimetallic nanoparticles exhibited a significant red shift in the surface plasmon resonance

12

to the near-infrared region. The strategy enables facile preparation of hollow bimetallic nanoparticles in

13

situ in polymer matrices.

14 15

KEYWORDS: polyelectrolyte multilayer, gold, silver, bimetallic nanoparticles, hollow

16

ACS Paragon Plus Environment

2

Page 3 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Langmuir

INTRODUCTION

2

Metallic nanoparticles have been the focus of intense research in recent decades because of their

3

attractive properties and potential applications in areas such as electronics, photonics, filters, sensors,

4

catalysis, information storage, and surface-enhanced Raman scattering (SERS).1,2 In particular,

5

nanoparticles of noble metals such as Au and Ag have attracted growing attention due to their strong

6

surface plasmon resonance (SPR), a property drastically different from that of the bulk materials and

7

strongly dependent on their size, shape, structure, composition, and the dielectric properties of the

8

surrounding medium.3,4 As a result, these nanoparticles can display intense colors when dispersed in

9

liquid media or embedded in solid supports.5-7

10

Among the nanoparticles of various shapes and structures, hollow nanoparticles have generated

11

special interest because they offer some advantages over the corresponding counterparts, such as

12

increased surface area, lower density, saving of materials, reduction in cost, and tunable optical

13

properties.8,9 Hollow metallic or oxide nanoparticles can be fabricated through the nanoscale Kirkendall

14

effect,10 and Ostwald ripening,11 but the main synthetic route to hollow nanostructures is to use various

15

sacrificial templates such as polystyrene microspheres,12 silica microspheres,13 and different metallic

16

nanoparticles14-21 such as Co, and Ag. In particular, galvanic replacement reaction is an effective and

17

simple method for fabrication of metallic nanostructures with scalable cavity where the additional step

18

of removal of the sacrificial core via calcination or chemical etching is not needed. For example, Xia

19

and coworkers reported the syntheses via galvanic replacement reaction of metallic nanoboxes,

20

nanoshells, nanotubes, and nanocages, which may find potential biomedical application such as

21

diagnosis and photothermal treatment.15-18 Bai and coworkers have prepared hollow Pt nanoparticles

22

using Co sacrificial templates, and reported their good electrocatalytic activity for methanol oxidation.14

23

Murphy and coworkers have synthesized hollow Ag-Au nanowires with high SERS performance.19 Lee

24

and coworkers have prepared hollow Ag-Au nanoshells with tunable optical properties.20 Zhou and

25

coworkers reported the experimental and theoretical simulation investigation of hollow Au-Ag alloy

26

nanoshells.21 Most of the synthesis of hollow nanoparticles reported to date are carried out in liquid ACS Paragon Plus Environment

3

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

media. However, for many practical applications, such as catalysis, SERS, optoelectronic and sensor

2

devices, the nanoparticles often need to be immobilized on a substrate or embedded in a matrix.22

3

Therefore in situ synthesis of hollow nanoparticles within solid films is highly desirable.

4

Page 4 of 17

Layer-by-layer assembly is a simple, inexpensive and versatile approach by which thin films can be

5

conveniently prepared.23 Using this approach, hybrid films containing inorganic nanoparticles and

6

nanowires can be fabricated directly by consecutive deposition of polyelectrolyte and inorganic particles

7

onto solid substrates,24 which can then be used in a large variety of applications ranging from catalysis25

8

to antireflection and antifogging coatings.26 Alternatively, polyelectrolyte multilayers (PEMs) can be

9

employed as nanoreactors for preparation of organic-inorganic nanocomposites.27-38 A broad range of

10

metallic nanoparticles, such as Au,28 Ag,29-32 Pt,33 and Pd34 monometallic nanoparticles and Au-Ag36-38

11

bimetallic nanoparticles, have been synthesized in PEMs. However, the size and size distribution of the

12

nanoparticles produced in PEM nanoreactors in general is not well-controlled compared to that in liquid

13

media, especially for that prepared via photochemical method or thermal reduction.

14

Recently we demonstrated that counterions that are universally present in PEMs can be utilized for

15

introduction of charged species into PEMs via ion exchange,39 which can undergo further reactions to

16

yield nanoparticles in situ.32,33 Using this strategy, monometallic nanoparticles as well as bimetallic

17

Au@Ag and Au@Pt core-shell nanoparticles have been synthesized.40-42 In this work, we report the

18

fabrication in PEMs of spherical Ag nanoparticles with well-controlled sizes via a two-stage process

19

(seeding and growth), which are then used as sacrificial templates to synthesize hollow Ag-Au

20

bimetallic nanoparticles via galvanic replacement reaction. The geometry of the Ag-Au bimetallic

21

nanoparticles, including the size of the cavity, can be readily controlled, and SPR characteristics of the

22

particles in the PEMs are tunable in the near infrared region.

23

EXPERIMENTAL SECTION

24 25

Materials. Chloroauric acid tetrahydrate (HAuCl4·4H2O) and silver nitrate (AgNO3) were purchased from Sinopharm Chemical Reagent Co., Ltd. Sodium chloride (NaCl) was purchased from Beijing

ACS Paragon Plus Environment

4

Page 5 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1

Chemical Reagents Company. Ascorbic acid was purchased from Huishi Biochemical Co., Ltd.

2

Poly(diallyldimethylammonium chloride) (PDDA, 20 wt% in water, MW~200k-350k), poly(styrene

3

sulfonate) (PSS, MW~70k) and sodium boronhydride (NaBH4) were purchased from Aldrich. All

4

chemicals were used as received without further purification. Ultrapure water (18.2 MΩ cm) was

5

purified with a PGeneral GWA-UN4 system and used in all experiments.

6

Preparation of (PDDA/PSS)n film. Quartz and glass slides were cleaned in a boiling piranha solution

7

(H2SO4/H2O2=70:30 v/v) and subsequently rinsed with copious amounts of ultrapure water. A

8

(PDDA/PSS)n multilayer film, denoted PEMn, was assembled by sequential dipping of the substrate into

9

PDDA (1.0 mg/mL) and PSS (1.0 mg/mL) aqueous solutions for 30 min each until the desired number

10

of bilayers (n) was obtained. Every dipping was followed by sufficient water rinsing. NaCl of 1.5 M

11

concentration was maintained in all polyelectrolyte solutions.

12

Synthesis of Ag nanoparticles. A PEM3 film was dipped into a AgNO3 solution (10 mL, 10 mM) for

13

5 min, removed and rinsed with water, and then treated with a freshly prepared aqueous solution of

14

NaBH4 (10 mL, 10 mM, for the first reduction only) or ascorbic acid (10 mL, 0.1 M, for all subsequent

15

reductions) for 5 min. This ion-exchange/reduction reaction cycle was repeated 3 times to produce a

16

PEM loaded with Ag nanoparticle seeds. Then additional PDDA and PSS layers were deposited onto the

17

seeded PEM3 film following the assembly procedure described above until a desired number of bilayers

18

was reached. Next the film was subjected to the ion-exchange/reduction cycle described above using

19

only ascorbic acid as the reducing agent. The thus-prepared films loaded with Ag nanoparticles are

20

denoted PEM3Ag3/PEMnAgx for short, where n and x is the number of the additional PDDA/PSS

21

bilayers deposited and the number of the ion-exchange/reduction cycles carried out for Ag, respectively.

22

Fabrication of hollow Ag-Au bimetallic nanoparticles. The PEMs loaded with Ag nanoparticles

23

were immersed into a HAuCl4 solution (10 mL, 0.1 mM) with different dipping times to allow the

24

galvanic replacement reaction to proceed. The films were then removed and rinsed with water

25

thoroughly and dried in a nitrogen stream.

ACS Paragon Plus Environment

5

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 6 of 17

Characterization. UV-vis spectra of the PEMs containing nanoparticles deposited on quartz slides

2

were acquired on a TU-1901 spectrometer (Beijing Purkinje General Instrument Co., Ltd.).

3

Transmission electron microscopy (TEM) measurements were carried out on a JEOL JEM-1011

4

microscope operating at an accelerating voltage of 100 kV. A small piece of PEM film loaded with

5

nanoparticles was peeled off from the substrate in hydrofluoric acid, floated in ultrapure water, and

6

transferred to carbon-coated copper grids for TEM characterization. Energy dispersive X-ray (EDX)

7

spectra were acquired on a Tecnai F20 microscope (Philips) operating at 200 kV.

8

RESULTS AND DISCUSSION

9

Fabrication of metal nanoparticles in PEM nanoreactors has been explored extensively, which

10

involves various methods including chemical reduction,31 thermal reduction,31 and photochemical

11

reaction.43 The nanoparticles prepared however, in general are very small and with a rather broad size

12

distribution. To mitigate this drawback, we adopted a two step protocol. First, Ag seeds are introduced

13

into a PEM3 film via the ion-exchange/reduction reaction.32 A PEM consisting of only 3 bilayers is used

14

here so that the counterion content is low, and hence only a small number of Ag seeds are produced.32

15

Then additional PDDA and PSS layers are deposited on this seeded PEM, which dramatically increases

16

the counterion content of the film,32 so that much more Ag metal can be produced in each ion-

17

exchange/reduction cycle and bigger particles can be synthesized in fewer cycles. In addition, a weak

18

reducing agent, ascorbic acid, is used after the first cycle so that the Ag reduced in all subsequent cycles

19

would grow the existing nanoparticles (produced in the first cycle) rather than generate new ones,

20

leading to more uniform particle sizes.42

21

Figure 1 shows typical TEM images of the Ag nanoparticles synthesized in the PEMs under different

22

conditions. It can be seen that the small Ag nanoparticles are roughly spherical with a good dispersion,

23

and when they grow bigger some impinge into one another, and the particles become slightly elongated.

24

The size distribution of the large nanoparticles was rather uniform (Figure 1, c~f) compared to those

25

previously reported for nanoparticles synthesized in PEMs, with a relative standard deviation of ~14%

ACS Paragon Plus Environment

6

Page 7 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1

for the particle size (Supporting Information). The average size of the Ag seeds was ~10 nm (Figure 1a).

2

For PEM3Ag3/PEMnAg2 (n=1~3), where additional 1~3 PDDA/PSS bilayers were deposited on the

3

PEM3Ag3 so that the total numbers of bilayers of the PEMs became 4~6, respectively, and two ion-

4

exchange/reduction cycles were carried out, the average sizes of the Ag nanoparticles were 13.6, 16.9,

5

22.0 nm (Figure 1, b~d), exhibiting a linear dependence on the number of bilayers in the PEM. In

6

addition, for PEM3Ag3/PEM3Agx, where the number of bilayers was the same (6 total), the average size

7

of the Ag particles was 22.0, 26.6, and 29.8 nm when the additional ion-exchange/reduction cycles (x)

8

carried out was 2, 4, and 6, respectively (Figure 1, d~f). Therefore, it is clear that the size of the

9

nanoparticles in the PEM can be effectively controlled by varying the bilayer number of the PEM and/or

10

the number of exchange/reduction cycle.

11

12 13

Figure 1. TEM images of Ag nanoparticles synthesized in the PEMs under different conditions. (a)

14

PEM3Ag3, (b) PEM3Ag3/PEM1Ag2, (c) PEM3Ag3/PEM2Ag2, (d) PEM3Ag3/PEM3Ag2, (e)

15

PEM3Ag3/PEM3Ag4, and (f) PEM3Ag3/PEM3Ag6. Insets are corresponding size distribution.

16 17 18

The Ag nanoparticles embedded in the PEM were characterized by UV-vis absorption spectroscopy. As seen in Figure 2a, the intensity of the SPR peak for Ag nanoparticles increases with the number of ACS Paragon Plus Environment

7

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 17

1

bilayers, a clear indication of higher Ag loadings in thicker PEMs, where counterions are more abundant

2

and a greater amount of Ag can be produced in each cycle. This is accompanied by a slight red shift in

3

the peak position (from 428 to 446 nm as the bilayer number increases from 3 to 6), as a result of the

4

particle size increase. Similar trends are observed in Figure 2b, where the Ag loading and particle size

5

are grown by increasing the number of ion-exchange/reduction cycle. In addition the SPR peak in Figure

6

2b becomes rather broad, where two components appear to be present. This might be due to the fact that

7

some of the particles are elongated rather than being perfectly spherical, as seen in Figure 1 e and f.

8 9 10

Figure 2. UV-vis absorption spectra of Ag nanoparticles prepared (a) in PEMs of different bilayer number, and (b) via different ion-exchange/reduction cycles.

11

ACS Paragon Plus Environment

8

Page 9 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1 2

Figure 3. UV-vis absorption spectrum as a function of reaction time for (a) PEM3Ag3/PEM3Ag2, (b)

3

PEM3Ag3/PEM3Ag4, and (c) PEM3Ag3/PEM3Ag6 film treated with HAuCl4 solution. Dashed lines

4

indicate estimated Au SPR peak positions assuming Ag template nanoparticles are completely converted

5

into Au spheres.

6 7

The synthesis of hollow nanoparticles in solution phase has been extensively reported. We adopted the

8

galvanic replacement reaction for in situ fabrication of hollow nanoparticles in PEMs. Using the Ag

9

nanoparticles prepared as sacrificial templates, hollow Ag-Au nanoparticles4,20 were synthesized in the

10

PEMs via a galvanic replacement reaction between the Ag nanoparticles and a HAuCl4 solution

11

(3Ag(s)+AuCl4-(aq)Au(s)+3Ag+(aq)+4Cl-(aq)).7,16 More specifically, when Ag particles are immersed

12

in a HAuCl4 solution, they are oxidized into silver ions due to the difference in standard reduction

13

potential between AuCl4-/Au (0.99 V vs SHE) and Ag+/Ag (0.80 V vs SHE). In the galvanic

14

replacement reaction, a Au layer is deposited on the surface of the Ag nanoparticle, and with the reaction

15

time increasing, more Ag atoms are oxidized and removed from the interior of the particle. Also from

16

the reaction equation and density data, it is clear that the volume of Au produced is about 1/3 of Ag

17

consumed. Therefore, hollow nanoparticles of smaller sizes than the Ag templates are formed in the

18

process. The reaction process was monitored by UV-vis spectroscopy. Figure 3 displays the UV-vis

19

spectra as functions of reaction time for Ag nanoparticles of different sizes. It can be seen that the SPR

20

peak decreases gradually and becomes broader with time, with the peak position shifting to longer

ACS Paragon Plus Environment

9

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 17

1

wavelength, and when the reaction time is longer than 20 min, the SPR peak shifts back to ~550 nm.

2

This observation is consistent with the replacement of Ag by Au and the formation of hollow

3

nanoparticles. The weakening of the SPR peak, i.e. the decrease in the extinction cross-section is due to

4

two reasons, as documented in the literature.20 First, Au generally has smaller extinction cross-sections

5

than Ag particles because there is less plasmon damping in Ag than in Au. Second, upon the

6

replacement of Ag by Au, there is less material left. With the progress of the galvanic replacement

7

reaction, Au is deposited on the nanoparticles, and both the amount of hollow particles and the cavity

8

size in the hollow particles increase with time, resulting in progressive red-shift in the plasmon

9

resonance. Eventually the hollow structures collapse to form Ag-Au nanoparticles. The process is also

10

evidenced in Figure 4, where TEM images of the nanoparticles at different reaction times are displayed.

11

It can be seen that while the particle size remains largely the same, the percentage of hollow

12

nanostructures is 11%, 67%, and 92% for PEM3Ag3/PEM3Ag2 at 1, 5, and 10 min reaction time,

13

respectively, and at 20 min the particles are much smaller and there is no hollow structure present.

14

Compared to the Ag template nanoparticles, the hollow particles are smaller and more irregular in shape,

15

with a slightly broader size distribution.

16 17

Figure 4. TEM images of Ag-Au nanoparticles prepared from PEM3Ag3/PEM3Ag2 at reaction time of (a)

18

1 min, (b) 5 min, (c) 10 min, and (d) 30 min. Insets are corresponding size distribution.

19 20

For hollow nanostructures, the sizes of the particle and the cavity are important for their properties.

21

Figure 5 shows the hollow nanoparticles in the PEM prepared from Ag templates of different sizes. We

22

can see that a large portion of the particles in the PEM are hollow and spherical (the percentage of ACS Paragon Plus Environment

10

Page 11 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1

hollow particles is 51%, 43%, and 47%, respectively), and the size of the hollow particles can be well

2

controlled by using Ag template particles of different sizes. Furthermore, the size of the cavity can be

3

tuned by varying the time of reaction between the Ag templates and the HAuCl4 solution. As seen in

4

Figure 4 (a-c), with the reaction time increasing, the size of the cavity in the hollow particles becomes

5

bigger.

6 7

Figure 5. Hollow nanoparticles prepared from (a) PEM3Ag3/PEM3Ag2, (b) PEM3Ag3/PEM3Ag4, and (c)

8

PEM3Ag3/PEM3Ag6 (reaction time 3 min). Insets are corresponding size distribution.

9 10

Furthermore, elemental analysis by EDX on the nanoparticles revealed presence of significant

11

amounts of Ag in additional to Au, even in the collapsed particles. The Au/Ag atomic ratio was 0.65 and

12

2.13 for the hollow particles and the solid ones formed at 10 and 30 min reaction time, respectively

13

(Supporting Information). Therefore, the hollow structure we synthesized in the PEM was Ag-Au

14

hollow nanoparticles.

15

Although the present study is focused on hollow Ag-Au bimetallic nanoparticles, the strategy is

16

general and can be utilized to synthesize hollow bimetallic nanoparticles of other elements in multilayer

17

thin films, as long as the standard reduction potential of the first element is lower than that of the second

18

one.

19

CONCLUSIONS

20 21

We have synthesized Ag-Au hollow nanoparticles of different sizes in polymeric thin films. First Ag nanoparticles were synthesized in the PEM via an ion-exchange/reduction process in two stages, a

ACS Paragon Plus Environment

11

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 17

1

seeding stage and a size growth stage, which resulted in bigger particles and rather uniform size

2

distribution, the size readily tuned by manipulating the ion content in the PEM and the number of the

3

ion-exchange/reduction cycle. The Ag nanoparticles obtained were then used as sacrificial templates to

4

fabricate hollow Ag-Au bimetallic nanoparticles via a galvanic replacement reaction. The process was

5

monitored by UV-vis absorption spectroscopy, and the hollow structure can be tuned by controlling the

6

reaction kinetics. The SPR peak of the hollow nanoparticles exhibited a significant red shift and

7

appeared in the near-infrared region. This work provides a general strategy for in situ fabrication in

8

polymer matrix of hollow bimetallic nanoparticles that may find application in the fields of catalysis and

9

optical materials.

10

ASSOCIATED CONTENT

11

Supporting Information. EDX spectra and size distribution data for metal NPs synthesized in PEMs.

12

This material is available free of charge via the Internet at http://pubs.acs.org.

13

AUTHOR INFORMATION

14

Corresponding Author

15

*Phone (+86)431-85262854; *Fax (+86)431-85262126; e-mail [email protected].

16

Notes

17

The authors declare no competing financial interest.

18

ACKNOWLEDGMENT

19

This work is supported by the National Natural Science Foundation of China (21174145). Z.S. thanks

20

the NSFC Fund for Creative Research Groups (50921062) for support.

21

REFERENCES

ACS Paragon Plus Environment

12

Page 13 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1

(1)

Muñoz-Flores, B. M.; Kharisov, B. I.; Jiménez-Pérez, V. M.; Martínez, P. E.; López, S. T.

2

Recent Advances in the Synthesis and Main Applications of Metallic Nanoalloys. Ind. Eng. Chem. Res.

3

2011, 50, 7705-7721.

4

(2)

5

Mechanisms, Characterization, and Applications. Chem. Rev. 2012, 112, 2373-2433.

6

(3)

7

2002, 298, 2176-2179.

8

(4)

9

Silver Nanoshells with Extinctions Strongly Red-Shifted to the Near-Infrared. ACS Appl. Mater. Inter.

Ghosh Chaudhuri, R.; Paria, S. Core/Shell Nanoparticles: Classes, Properties, Synthesis

Sun, Y. G.; Xia, Y. N. Shape-Controlled Synthesis of Gold and Silver Nanoparticles. Science

Vongsavat, V.; Vittur, B. M.; Bryan, W. W.; Kim, J.-H.; Lee, T. R. Ultrasmall Hollow Gold–

10

2011, 3, 3616-3624.

11

(5)

12

Nanoparticles with Independently Tunable Morphology, Composition, Size, and Surface Chemistry and

13

Their 3-D Superlattices. Adv. Funct. Mater. 2009, 19, 1387-1398.

14

(6)

15

Compositional Variation of Au@Ag Core–Shell Nanocubes with Sulfides. Langmuir 2012, 28, 9003-

16

9009.

17

(7)

18

Nanospheres: Study of Their Surface Plasmon Resonance. Langmuir 2012, 28, 6670-6676.

19

(8)

20

Reaction in an Organic Solution. Chem. Commun. 2005, 1684-1686.

21

(9)

22

Nanostructures and Chloroauric Acid in Aqueous Medium. J. Am. Chem. Soc. 2004, 126, 3892-3901.

23

(10)

24

Formation of Hollow Nanocrystals Through the Nanoscale Kirkendall Effect. Science 2004, 304, 711-

25

714.

Zhang, Q. B.; Xie, J. P.; Liang, J.; Lee, J. Y. Synthesis of Monodisperse Ag-Au Alloy

Park, G.; Lee, C.; Seo, D.; Song, H. Full-Color Tuning of Surface Plasmon Resonance by

Choi, Y.; Hong, S.; Liu, L.; Kim, S. K.; Park, S. Galvanically Replaced Hollow Au–Ag

Selvakannan, P. R.; Sastry, M. Hollow Gold and Platinum Nanoparticles by a Transmetallation

Sun, Y. G.; Xia, Y. N. Mechanistic Study on the Replacement Reaction between Silver

Yin, Y.; Rioux, R. M.; Erdonmez, C. K.; Hughes, S.; Somorjai, G. A.; Alivisatos, A. P.

ACS Paragon Plus Environment

13

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 17

1

(11)

Zhang, L.; Wang, H. Cuprous Oxide Nanoshells with Geometrically Tunable Optical Properties.

2

ACS Nano 2011, 5, 3257-3267.

3

(12)

4

with a Tunable Cavity Size onto Core–Shell Gel Particles. Angew. Chem. Int. Ed. 2003, 42, 1943-1945.

5

(13)

6

Successful Application to the Recyclable Heterogeneous Catalyst for Suzuki Coupling Reactions. J. Am.

7

Chem. Soc. 2002, 124, 7642-7643.

8

(14)

9

Nanospheres: Facile Synthesis and Enhanced Electrocatalysts. Angew. Chem. Int. Ed. 2004, 43, 1540-

Yang, Z.; Niu, Z.; Lu, Y.; Hu, Z.; Han, C. C. Templated Synthesis of Inorganic Hollow Spheres

Kim, S. W.; Kim, M.; Lee, W. Y.; Hyeon, T. Fabrication of Hollow Palladium Spheres and Their

Liang, H.-P.; Zhang, H.-M.; Hu, J.-S.; Guo, Y.-G.; Wan, L.-J.; Bai, C.-L. Pt Hollow

10

1543.

11

(15)

12

Approach to the Large-Scale Synthesis of Metal Nanostructures with Hollow Interiors. Nano Lett. 2002,

13

2, 481-485.

14

(16)

15

2003, 15, 641-646.

16

(17)

17

Nanocubes and AuCl2− or AuCl4−. Adv. Mater. 2008, 20, 2517-2522.

18

(18)

19

Gold Nanocages: From Synthesis to Theranostic Applications. Acc. Chem. Res. 2011, 44, 914-924.

20

(19)

21

Surface-Enhanced Raman Scattering. J. Mater. Chem. 2006, 16, 3929-3935.

22

(20)

23

Organic Medium. J. Phys. Chem. B 2005, 109, 19208-19212.

24

(21)

25

Alloyed Hollow Nanoshells. Scr. Mater. 2010, 63, 1193-1196.

Sun, Y. G.; Mayers, B. T.; Xia, Y. N. Template-Engaged Replacement Reaction: A One-Step

Sun, Y. G.; Mayers, B.; Xia, Y. N. Metal Nanostructures with Hollow Interiors. Adv. Mater.

Au, L.; Lu, X.; Xia, Y. A Comparative Study of Galvanic Replacement Reactions Involving Ag

Xia, Y.; Li, W.; Cobley, C. M.; Chen, J.; Xia, X.; Zhang, Q.; Yang, M.; Cho, E. C.; Brown, P. K.

Hunyadi, S. E.; Murphy, C. J. Bimetallic Silver-Gold Nanowires: Fabrication and Use in

Yang, J.; Lee, J. Y.; Too, H.-P. Core−Shell Ag−Au Nanoparticles from Replacement Reaction in

Zhang, Z.-S.; Yang, Z.-J.; Liu, X.-L.; Li, M.; Zhou, L. Multiple Plasmon Resonances of Au/Ag

ACS Paragon Plus Environment

14

Page 15 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Langmuir

1

(22)

Liu, X. Y.; Wang, A. Q.; Yang, X. F.; Zhang, T.; Mou, C. Y.; Su, D. S.; Li, J. Synthesis of

2

Thermally Stable and Highly Active Bimetallic Au-Ag Nanoparticles on Inert Supports. Chem. Mater.

3

2009, 21, 410-418.

4

(23)

5

Nanofabrication Technique for Exploratory Research and Realistic Application. Phys. Chem. Chem.

6

Phys. 2007, 9, 2319-2340.

7

(24)

8

Nanoparticles and Nanowires. Acc. Chem. Res. 2008, 41, 1831-1841.

9

(25)

Priya, D. N.; Modak, J. M.; Raichur, A. M. ACS Appl. Mater. Inter. 2009, 1, 2684-2693.

10

(26)

Zhang, L. B.; Li, Y.; Sun, J. Q.; Shen, J. C. Mechanically Stable Antireflection and Antifogging

11

Coatings Fabricated by the Layer-by-Layer Deposition Process and Postcalcination. Langmuir 2008, 24,

12

10851-10857.

13

(27)

14

Synthesis of Diverse Nanostructured Materials. Prog. Polym. Sci. 2004, 29, 987-1019.

15

(28)

16

for in Situ Gold Nanoparticle Synthesis. Chem. Mater. 2008, 20, 6756-6763.

17

(29)

18

F. Multilayer Nanoreactors for Metallic and Semiconducting Particles. Langmuir 2000, 16, 1354-1359.

19

(30)

20

Silver Nanoparticle Composites Controlling Metal Concentration and Nanoparticle Size. Langmuir

21

2002, 18, 3370-3375.

22

(31)

23

Multilayered Polyelectrolyte Films. Nano Lett. 2002, 2, 497-501.

24

(32)

25

Exchange and in situ Reduction. Langmuir 2009, 25, 12355-12360.

Ariga, K.; Hill, J. P.; Ji, Q. M. Layer-by-Layer Assembly as a Versatile Bottom-Up

Srivastava, S.; Kotov, N. A. Composite Layer-by-Layer (LBL) Assembly with Inorganic

Shi, X. Y.; Shen, M. W.; Mohwald, H. Polyelectrolyte Multilayer Nanoreactors toward the

Chia, K. K.; Cohen, R. E.; Rubner, M. F. Amine-Rich Polyelectrolyte Multilayer Nanoreactors

Joly, S.; Kane, R.; Radzilowski, L.; Wang, T.; Wu, A.; Cohen, R. E.; Thomas, E. L.; Rubner, M.

Wang, T. C.; Rubner, M. F.; Cohen, R. E. Polyelectrolyte Multilayer Nanoreactors for Preparing

Dai, J. H.; Bruening, M. L. Catalytic Nanoparticles Formed by Reduction of Metal Ions in

Zan, X.; Su, Z. Incorporation of Nanoparticles into Polyelectrolyte Multilayers via Counterion

ACS Paragon Plus Environment

15

Langmuir

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 17

1

(33)

Zhang, X.; Zan, X.; Su, Z. Polyelectrolyte Multilayer Supported Pt Nanoparticles as Catalysts for

2

Methanol Oxidation. J. Mater. Chem. 2011, 21, 17783-17789.

3

(34)

4

Embedded in Polyelectrolyte Multilayers. J. Am. Chem. Soc. 2004, 126, 2658-2659.

5

(35)

6

Multilayers via Electroless Nickel Deposition. Chem. Mater. 2003, 15, 299-304.

7

(36)

8

Synthesize Au-Ag Alloy Nanoparticles within Polyelectrolyte Multilayer Nanoreactors upon Thermal

9

Reduction. Langmuir 2010, 26, 6713-6719.

Kidambi, S.; Dai, J.; Li, J.; Bruening, M. L. Selective Hydrogenation by Pd Nanoparticles

Wang, T. C.; Rubner, M. F.; Cohen, R. E. Manipulating Nanoparticle Size within Polyelectrolyte

Shang, L.; Jin, L. H.; Guo, S. J.; Zhai, J. F.; Dong, S. J. A Facile and Controllable Strategy to

10

(37)

Rahim, M. A.; Nam, B.; Choi, W. S.; Lee, H.-J.; Jeon, I. C. Polyelectrolyte Complex Particle-

11

Based Multifunctional Freestanding Films containing Highly Loaded Bimetallic Particles. J. Mater.

12

Chem. 2011, 21, 11831-11837.

13

(38)

14

assisted Fabrication of Bimetallic {Poly(ethylenimine)-Ag/Au} Multilayer Polyelectrolyte Film and

15

Application in Electrocatalysis. Thin Solid Films 2011, 519, 5609-5615.

16

(39)

17

of Electrostatic Self-Assembled Multilayers. Chem. Commun. 2008, 5972-5974.

18

(40)

19

High Catalytic Activity. Adv. Mater. 2012, 24, 4574-4577.

20

(41)

21

Polyelectrolyte Multilayers as Nanoreactors. Chin. J. Appl. Chem. 2012, 29, 1433-1437.

22

(42)

23

Polyelectrolyte Multilayers as Nanoreactors. Langmuir 2012, 28, 15705-15712.

24

(43)

25

Silver Nanoparticles Obtained in PAH/PAA-Based Multilayers by Photochemical Reaction. J. Phys.

26

Chem. C 2009, 113, 19005-19010.

Li, S.-K.; Zhang, L.; Huang, F.-Z.; Yu, X.-R.; Xie, A.-J.; Shen, Y.-H.; Wang, Y. AuCl4− Ions-

Wang, L.; Lin, Y.; Peng, B.; Su, Z. Tunable Wettability by Counterion Exchange at the Surface

Zhang, X.; Su, Z. Polyelectrolyte-Multilayer-Supported Au@Ag Core-Shell Nanoparticles with

Zhang, X.; Chu, C.; Huang, K.; Su, Z. Preparation of Au@Pt Core-Shell Nanoparticles Using

Zhang, X.; Wang, H.; Su, Z. Fabrication of Au@Ag Core–Shell Nanoparticles Using

Machado, G.; Beppu, M. M.; Feil, A. F.; Figueroa, C. A.; Correia, R. R. B.; Teixeira, S. R.

ACS Paragon Plus Environment

16

Page 17 of 17

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Langmuir

TOC graphic

2

ACS Paragon Plus Environment

17